TECOtubeexpanders BROCHURE

tube expanders company
TAKE THE
APPROACH
TO TUBE EXPANDING
UTILIZE
SUPERIOR
TUBE INSTALLATION
AND REMOVAL TOOLS
BOILERS
CONDENSERS
HEAT EXCHANGERS

CONTENTS
Page
Introduction .................................................................... 3-4
Standard Expander Program ............................................ 5
CH-900 Series Expanders .................................................. 6
CH-1300 Series Expanders ................................................ 7
CH-800 Series Expanders ............................................... 8-9
CH-800 Five Roll Expanders ....................................... 10-11
CH-1200 Series Expanders ......................................... 12-13
CH-1200 Five Roll Expanders ..................................... 14-15
CH-8012 Series Expanders ......................................... 16-17
TBE Series Boiler Expanders ........................................... 18
TACK Rolling Expanders ................................................. 19
Special Expanders....................................................... 20-22
Air Driven Torque Controlled Rolling Motors................. 23
Auto Tube Expanding Machine ................................. 24-25
Roll-A-Motor Control Unit .......................................... 26-27
Roll-A-Motors & Universal Telescopic Shaft ............ 28-31
Roll-A-Motors Accessories .............................................. 32
Tube Installation Tools ............................................... 33-34
Tube Removal Tools ................................................... 35-46
Hydraulic Pumps .............................................................. 39
Hydraulic Operated Gripper Model Tube Puller ....... 40-41
Hydraulic Operated Spear Model Tube Puller .......... 42-43
Automatic & Continuous Tube Pulling ...................... 44-45
Hydraulic Pipe Vice........................................................... 46
Tube-End Bevelling Machines.................................... 47-48
TECO Hydraulic System for Tack Expanding ................. 49
TECO Hydro Expansion Unit ...................................... 50-51
Tube Sizes & U.S. To Metric Conversion Tables
and Formulas............................................................... 52-54
Information Sheet ............................................................ 55

- Tube Expanders
for Condensers, Heat Exchangers and Boilers
TECO tube expanders are made from high quality alloy
steels and are specially heat treated.
The adjustable thrust collar incorporates a thrust bearing
which eliminates frictional heating and possible tube end
damage and makes these tools suitable for operation
with electric or pneumatic power tools.
The tube expanders in this catalogue cover the range of
tubes from 1/4" O.D. - 20 Gauge to 4 1/2" O.D. - 2-18
Gauge.
SPECIAL TUBE EXPANDERS

Special Tube Expanders for any tube size and reach are
manufactured to specification. TECO has manufactured
for example a special tube expander with 3 1/4" O.D. and
12 feet reach for diesel engines.
So do not hesitate to send your application for your
specific need.
MANDREL EXTENSION AND

UNIVERSAL JOINTS
THRUST COLLARS
The following different models of thrust collar can be
supplied:
a) recessed thrust collar instead of standard collar (depth
of recess to be specified).
b) adjustable recess thrust collar to bring the tubes
automatically to the right position in relation to the
tube sheet; from a flush fitting on the tube sheet to as
much as a 3/8" protrusion can be achieved.
c) small diameter collars, for the expansion of the
outside row of tubes into waterboxes for example.
d) for thin gauge tube a special thrust collar can be
supplied to prevent the tube from becoming trapped
between the rolls and the collar as there is a possibility
of thin tube being drawn up inside the collar whilst
rolling.
CONSTRUCTION
These can be supplied as standard or special length with

different square sizes.
Mandrel extensions can be utilized in situations where
there is not sufficient room available to use standard
expanders with a drive unit, e.g. in water boxes of
condensers etc.
TECO tube expanders are of the self feeding and parallel

rolling type.
The taper feed angle ensures a uniform expansion and
tightness of the tube.
The rolls have a radius at both ends to avoid a sharp
ridge inside the tube.
STANDARD
REVERSIBLE THRUST/COLLAR
TUBE SIZE INFORMATION
The models CH-800 and CH-1200 Tube Expanders are

equipped with a reversible thrust collar. This is specially
designed by TECO.
This offers the possibility of using the collar flush or
recessed for the front tube sheet (please specify required
recess depth). When reversed, the collar is now suitable
for the rear tube sheet acting as a flow-collar allowing the
tube to be drawn outwards. This eliminates the need to
precisely cut the tube to length before expanding.
Tube O.D. refers to the measured outside diameter of a

tube.
Tube I.D. refers to the measured inside diameter of a
tube.
Tube Gauge is Birmingham wire gauge (B.W.G.) of the
wall thickness of the tube.
STANDARD REVERSIBLE THRUST/COLLAR
COLLAR
THRUST RACE
THRUST RACE HOUSING
NUT WITH SETSCREW

- Tube Expanders
for Condensers, Heat Exchangers and Boilers
LUBRICATION, CARE AND MAINTENANCE OF TUBE EXPANDERS
SOME GUIDELINES
FOR TUBE EXPANSION
The type of use demanded of tube expanders is severe

and therefore these precision tools should be given a
reasonable amount of care. For long, trouble-free and
economical service the following is suggested:
Improperly rolled joints create additional expense to

rectify. Under-rolling can be easily corrected merely by
re-rolling, but over-rolling will require complete tube
replacement. The optimum joint is one that develops a
leak tight joint with adequate strength for the service
intended with the minimum amount of cold working or
reduction of the tube wall thickness.
Experience indicates that joints of this type can be
obtained with non-ferrous tubes in surface condensers
by expanding to a wall reduction of 5% to 6%. This wall
reduction is only achieved after metal to metal contact
between the tube O.D. and the tube sheet hole. Steel
tubes in heat exchangers may require wall reductions of
4% to 6%; soft copper and aluminium tubes in heat
exchangers also require larger wall reductions in the area
of 7% to 10%.
1. Remove all rust, mill scale and other foreign matter from
the inside and outside of the tube. Foreign matter on the
inside of the tube will tend to become embedded into the
tube wall and being abrasive may cause the rolls and
mandrel of the tube expander to start breaking up. Mill scale
or dirt left on the outer wall of the tube can cause damage to
the tube seat and prevent the formation of a pressure-tight
joint. Cleaning of the tube ends may be best accomplished
by wire brushing or polishing. Remove any protective
coating by washing with light oil or other solvents.
NB: DO NOT LEAVE A RESIDUE OF LIGHT OIL ON THE
OUTSIDE OF THE TUBE AS THIS MAY ALSO PREVENT A
PRESSURE-TIGHT JOINT.
2. Before using, the expander should be washed in any
commercial solvent to remove protective coatings, dirt,
grease and other foreign matter. Make sure that the rolls
and mandrel are in good condition and working
correctly.
3. Before using, expander should be properly lubricated
with a pressure resistant lubricant. We recommend using
TECO 'Lube-A-Tube'. This water soluble lubricant was
developed for tube rolling and may be mixed with water
to the desired consistency. For small diameter and light
tube gauges immerse the expander in TECO 'Lube-ATube' or light oil such as SAE 10 or 20.
For large diameter and heavy gauge tubes, brush the
expander with TECO 'Lube-A-Tube' or mixture of SAE 40
oil and graphite.
4. Expanders should be rotated at a speed proportionate
to the tube size, gauge and length of tube seat. Tube
materials must also be taken into consideration. The
proper speed will provide a safe cold working of tube
metal without crystallization or surface damage. Speed is
also a major factor in expander life and if correctly set
will prevent undue roller or mandrel breakdown. Ideal
speed will keep to a minimum mandrel slip and the heat
generated in mandrels and rolls when working.
5. After rolling each tube, clean and cool the expander in
solvent or light oil and then properly lubricate the expander
again. It is good practice to use two expanders so that one
can be cooling whilst the clean expander is being used.
A typical example of the application of this method is

indicated for 3/4" x 18 gauge (19.05 x 1.24 mm) tube in a
condenser.
1.
Tube Sheet Hole
Tube O.D.
= 19.30 mm (.760")
= -19.05 mm (.750")
Clearance
0.25 mm (.010")
2.
Tube I.D.
Clearance
= 16.56 mm (.652")
= + 0.25 mm (.010")
I.D. Metal to Metal
16.81 mm (.662")
3.
6% of 1.24 mm x 2
Tube I.D. Metal to Metal
Expanded Tube I.D.
= 0.14 mm (.006")
= +16.81 mm (.662")
16.95 mm (.668")
LUBE-A-TUBE
TECO Lube-A-Tube is a water soluble lubricant especially
compounded for use with tube expanders. When rolling
large or small, ferrous or non-ferrous tubes, use TECO
Lube-A-Tube for smoother rolling and longer expander
life, for clean tube ends after rolling simply wash with
water.
6. Inspect the rolls and the mandrel after rolling each

tube. Replace any chipped rolls or mandrels
immediately. A small chip in a roll can damage the entire
expander, rolls or mandrel if not replaced at once.
It can also damage the tube causing marks in the expanded area which may necessitate tube removal.
7. After the job has been completed, the expander
should be cleaned thoroughly with a commercial solvent
or a light oil and stored in a manner which will avoid
possibility of parts rusting.
NB: DO NOT LEAVE A RESIDUE OF LIGHT OIL ON THE

OUTSIDE OF THE TUBE AS THIS MAY ALSO PREVENT A
PRESSURE-TIGHT JOINT.
can of 5 kg (11.1 lbs).

STANDARD MODELS OF
TUBE EXPANDERS
For Condensers And Heat
Exchangers.
Model: CH-900 Tube range: 1/4" to 3/8" O.D.
(6.35 to 9.52 mm) O.D.
Expander with 3/4" (19.05 mm) long rolls
suitable for tube sheet thicknesses
from 1/8" to 3/4" (3.175 mm to 19.05 mm).
CH-900
Expander with 1 1/4" (31.75 mm) long rolls
from 1/2" to 1 1/4" (12.70 mm to 31.75 mm).
Model: CH-1300 Tube range: 3/8" (9.52 mm) O.D.
CH-1300
Expander with 3/4" (19.05 mm) long rolls

from 1/4" to 3" (6.35 mm to 76.20 mm).
from 3/4" to 3 1/2" (19.05 mm to 88.90 mm).
CH-800
Model: CH-800 Tube range: 1/2" to 1 3/4" O.D.

(12.70 to 44.45 mm) O.D.
from 1/4" to 1 1/2" (6.35 mm to 38.10 mm).
from 1" to 2 1/4" (25.40 mm to 57.15 mm).
Special 4 or 5 roll models available.
CH-1200
Model: CH-1200 Tube range: 1/2" to 1 3/4" O.D.
(12.70 to 44.45 mm) O.D.
from 3/4" to 5 7/8" (19.05 mm to 149.09 mm).
from 1 1/2" to 6 1/2" (38.10 mm to 165.10 mm).
CH-1200

Model: CH-1200 Long reach with 1 1/2" or 2 1/4" rolls.
Tool reach standard 10"(B) or 12"(C)
Longer reaches available upon request.
Tube range: 1/2" to 1 3/4" (12.70 to 44.45 mm) O.D.
CH-8012
Model: CH-8012 Tube range: 1 3/4" to 4 1/2" O.D.

(44.45 to 114.30 mm) O.D.
from 1/2" to 4" (12.70 mm to 101.60 mm).

TUBE EXPANDERS
for Condensers and Heat Exchangers
Selection Guide:
Model : CH 900
Tube Size I.D. .155" - .320"
(3.95 - 8.13 mm)
TUBE SHEET
THICKNESS
Tubesheet
MIN. I.D. TUBE

TOOL ENTERS
A
MINIMUM
B
MAXIMUM
TUBE EXPANDER WITH

3/4" ROLL LENGTH
1/8"
(3.175 mm)
5/8"
(15.87 mm)
TUBE EXPANDER WITH

1 1/4" ROLL LENGTH
1/2"
(12.70 mm)
1 9/64"
(28.98 mm)
Tubesheet
TUBE
O.D.
AND
G.A.
MAX. TOOL
EXPANSION
Inch
mm
Inch
mm
1/4"-19
1/4"-20
1/4"-21
1/4"-22
1/4"-23
.155
.175
.180
.190
.195
3.95
4.44
4.57
4.83
4.95
.190
.205
.212
.220
.226
4.83
5.21
5.38
5.59
5.74
1/4"-24
1/4"-28
.201
.219
5.10
5.55
.232
.237
3/8"-14
3/8"-15
3/8"-16
3/8"-16
3/8"-17
.199
.230
.242
.242
.255
5.05
5.84
6.15
6.15
6.48
3/8"-18
3/8"-19
3/8"-20
3/8"-21
3/8"-22
.272
.286
.300
.306
.314
3/8"-23
3/8"-24
.320
.320
SIZE
SQUARE
ON
MANDREL
EXPANDER WITH
3/4" (19 mm) ROLLS
EXPANDER
NO.
EXPANDER WITH
1 1/4" (32 mm) ROLLS
MANDREL
NO.
ROLL SET EXPANDER ROLL SET

NO.
NO.
NO.
CH-921
CH-923
CH-924
CH-925
CH-926
TR-921
TR-923
TR-924
TR-925
TR-923
MT-40
MT-40
MT-40
MT-41
MT-41
5.92
6.02
CH-927
CH-928
TR-924
TR-903
MT-41
MT-928
.232
.265
.275
.280
.289
5.88
6.73
6.98
7.11
7.34
CH-914
CH-915
CH-916
TR-914
TR-915
TR-916
CH-918
TR-903
MT-35
MT-36
MT-36
MT-36-L
MT-37
6.85
7.26
7.62
7.77
7.98
.307
.320
.334
.340
.349
7.80
8.12
8.48
8.61
8.86
CH-901
CH-903
CH-905
CH-907
CH-909
8.13
8.13
.357
.357
9.08
9.08
CH-911
CH-911
1/4"
1/4"
CH-916-L
TR-916-L
TR-903
TR-903
TR-907
TR-907
TR-909
CH-902
CH-904
CH-906
CH-908
CH-910
TR-904
TR-904
TR-908
TR-908
TR-910
MT-30
MT-31
MT-32
MT-33
MT-34
TR-911
TR-911
CH-912
CH-912
TR-912
TR-912
MT-34
MT-34

TUBE EXPANDERS
Selection Guide:
Model : CH 1300
Tube Size I.D. .230" - .323"
(5.9 - 8.2 mm)
Tubesheet
MIN. I.D. TUBE

TOOL ENTERS
TUBE SHEET
THICKNESS
Tubesheet
TUBE
O.D.
AND
G.A.
MAX. TOOL
EXPANSION
Inch
mm
Inch
mm
3/8"-15
3/8"-18
3/8"-19
3/8"-20
.230
.270
.286
.300
5.84
6.85
7.26
7.62
.265
.307
.320
.334
6.73
7.80
8.12
8.48
3/8"-21
3/8"-22
3/8"-23
3/8"-24
.306
.314
.320
.320
7.77
7.98
8.13
8.13
.340
.349
.357
.357
8.61
8.86
9.08
9.08
SIZE
SQUARE
ON
MANDREL
A
MINIMUM
B
MAXIMUM
TUBE EXPANDER WITH

3/4" ROLL LENGTH
1/4"
(6.35 mm)
2 7/8"
(73.03 mm)
TUBE EXPANDER WITH

1 1/4" ROLL LENGTH
3/4"
(19.05 mm)
3 11/32"
(84.93 mm)
EXPANDER WITH
3/4" (19 mm) ROLLS
EXPANDER
NO.
EXPANDER WITH
1 1/4" (32 mm) ROLLS
MANDREL
NO.

NO.
NO.
NO.
CH-1301
CH-1303
CH-1305
TR-903
TR-903
TR-907
CH-1316
CH-1302
CH-1304
CH-1306
TR-1316
TR-904
TR-904
TR-908
MT-86
MT-80
MT-81
MT-82
CH-1307
CH-1309
CH-1311
CH-1311
TR-907
TR-909
TR-911
TR-911
CH-1308
CH-1310
CH-1312
CH-1312
TR-908
TR-910
TR-912
TR-912
MT-83
MT-84
MT-84
MT-84
1/4"

TUBE EXPANDERS
Selection Guide:
Model : CH 800
Tube Size I.D. .335" - 1.457"
(8.5 - 37.0 mm)
TUBE SHEET
THICKNESS
A Tubesheet
MIN. I.D. TUBE

TOOL ENTERS
Tubesheet
TUBE
O.D.
AND
G.A.
MAX. TOOL
EXPANSION
Inch
mm
Inch
mm
1/2"-14
1/2"-15
1/2"-16
1/2"-17
1/2"-18
.324
.349
.360
.374
.392
8.23
8.86
9.14
9.50
9.96
.374
.398
.410
.424
.447
9.50
10.11
10.41
10.77
11.35
5/8"-12
5/8"-13
5/8"-14
5/8"-15
.392
.425
.449
.471
9.96
10.79
11.40
11.96
.447
.480
.509
.536
11.35
12.19
12.73
13.61
5/8"-16
5/8"-17
5/8"-18
.485
.499
.517
12.32
12.67
13.13
.550
.564
.572
3/4"-10
3/4"-11
3/4"-12
3/4"-13
3/4"-14
.471
.499
.522
.550
.574
11.96
12.67
13.30
13.97
14.58
3/4"-15
3/4"-16
3/4"-17
3/4"-18
.596
.605
.619
.619
15.14
15.37
15.72
15.72
SIZE
SQUARE
ON
MANDREL
A
MINIMUM
B
MAXIMUM
TUBE EXPANDER WITH

1 1/2" ROLL LENGTH
1/4"
(6.35 mm)
1 1/4"
(31.75 mm)
TUBE EXPANDER WITH

2 1/4" ROLL LENGTH
1"
(25.40 mm)
2"
(50.80 mm)
EXPANDER WITH
1 1/2" (38.1 mm) ROLLS
EXPANDER
NO.
EXPANDER WITH
2 1/4" (57.1 mm) ROLLS
MANDREL
NO.

NO.
NO.
NO.
CH-797
CH-799
CH-801
CH-803
CH-805
TR-797
TR-1
TR-1
TR-2
TR-3
MT-797
MT-799
MT-1
MT-1
MT-2
CH-805
CH-807
CH-809
CH-811
TR-3
TR-4
TR-4
TR-5
CH-810
CH-812
TR-4-A
TR-5-A
MT-2
MT-3
MT-4
MT-5
13.97
14.32
14.53
CH-813
CH-815
CH-817
TR-6
TR-6
TR-7
CH-814
CH-816
CH-818
TR-6-A
TR-6-A
TR-7-A
MT-5
MT-6
MT-7
.536
.564
.582
.615
.639
13.61
14.32
15.20
15.62
16.23
CH-811
CH-815
CH-819-N
CH-821
CH-823
TR-5
TR-6
TR-7
TR-8
TR-9
CH-812
CH-816
CH-820-N
CH-822
CH-824
TR-5-A
TR-6-A
TR-7-A
TR-8-A
TR-9-A
MT-5
MT-6
MT-8
MT-8
MT-8
.661
.685
.699
.699
16.79
17.40
17.75
17.75
CH-825
CH-827
CH-829
CH-829
TR-10
TR-10
TR-11
TR-11
CH-826
CH-828
CH-830
CH-830
TR-10-A
TR-10-A
TR-11-A
TR-11-A
MT-8
MT-9
MT-9
MT-9
3/8"
3/8"
3/8"
Note : Expander CH 800 is also available as four or five roll expander see page 10-11.

TUBE
O.D.
AND
G.A.
MIN. I.D. TUBE

TOOL ENTERS
MAX. TOOL
EXPANSION
Inch
mm
Inch
mm
7/8"-10
7/8"-11
7/8"-12
7/8"-13
7/8"-14
.596
.619
.642
.670
.685
15.14
15.72
16.31
17.02
17.40
.661
.699
.722
.750
.774
16.79
17.75
18.34
19.05
19.66
7/8"-15
7/8"-16
7/8"-17
7/8"-18
.712
.726
.740
.740
18.08
18.44
18.80
18.80
.801
.815
.829
.829
1" - 8
1" - 9
1" -10
1" -11
1" -12
1" -13
.655
.685
.712
.740
.763
.791
16.64
17.40
18.08
18.80
19.38
20.09
1" -14
1" -15
1" -16
1" -17
1" -18-20
.810
.837
.837
.865
.865
1 1/8"- 8
1 1/8"- 9
1 1/8"-10
1 1/8"-11
SIZE
SQUARE
ON
MANDREL
EXPANDER WITH
1 1/2" (38.1 mm) ROLLS
EXPANDER
NO.
EXPANDER WITH
2 1/4" (57.1 mm) ROLLS
MANDREL
NO.

NO.
NO.
NO.
CH-825
CH-829
CH-831
CH-833
CH-835
TR-10
TR-11
TR-12
TR-13
TR-14
CH-826
CH-830
CH-832
CH-834
CH-836
TR-10-A
TR-11-A
TR-12-A
TR-13-A
TR-14-A
MT-8
MT-9
MT-9
MT-10
MT-11
20.34
20.70
21.06
21.06
CH-837
CH-839
CH-843
CH-843
TR-15
TR-15
TR-16
TR-16
CH-838
CH-840
CH-844
CH-844
TR-15-A
TR-15-A
TR-16-A
TR-16-A
MT-11
MT-12
MT-12
MT-12
.735
.774
.801
.829
.852
.880
18.67
19.66
20.34
21.06
21.64
22.35
CH-841
CH-835
CH-837
CH-843
CH-845
CH-847
TR-13
TR-14
TR-15
TR-16
TR-17
TR-18
CH-842
CH-836
CH-838
CH-844
CH-846
CH-848
TR-13-A
TR-14-A
TR-15-A
TR-16-A
TR-17-A
TR-18-A
MT-9
MT-11
MT-11
MT-12
MT-12
MT-12
20.57
21.26
21.26
21.97
21.97
.909
.936
.936
.964
.964
23.09
23.77
23.77
24.48
24.48
CH-849
CH-851
CH-851
CH-855
CH-855
TR-18
TR-19
TR-19
TR-21
TR-21
CH-850
CH-852
CH-852
CH-856
CH-856
TR-18-A
TR-19-A
TR-19-A
TR-21-A
TR-21-A
MT-13
MT-13
MT-13
MT-13
MT-13
.776
.810
.837
.865
19.71
20.57
21.26
21.97
.875
.909
.936
.964
22.22
23.09
23.77
24.48
CH-853
CH-849
CH-851
CH-855
TR-20
TR-18
TR-19
TR-21
CH-854
CH-850
CH-852
CH-856
TR-20-A
TR-18-A
TR-19-A
TR-21-A
MT-13
MT-13
MT-13
MT-13
1 1/8"-12
1 1/8"-13
1 1/8"-14
1 1/8"-15
.883
.916
.835
.962
22.43
23.57
23.75
24.43
.982
1.015
1.044
1.071
24.94
25.78
26.52
27.20
CH-857
CH-859
CH-861
CH-863
TR-21
TR-22
TR-23
TR-24
CH-858
CH-860
CH-862
CH-864
TR-21-A
TR-22-A
TR-23-A
TR-24-A
MT-14
MT-14
MT-15
MT-15
1 1/8"-16
1 1/8"-17
1 1/8"-18
.962
.990
.990
24.43
25.15
25.15
1.071
1.099
1.099
27.20
27.91
27.91
CH-863
CH-867
CH-867
TR-24
TR-26
TR-26
CH-864
CH-868
CH-868
TR-24-A
TR-26-A
TR-26-A
MT-15
MT-16
MT-16
1 1/4"- 8
1 1/4"- 9
1 1/4"-10
1 1/4"-11
1 1/4"-12
.901
.935
.962
.990
1.013
22.88
23.75
24.43
25.15
25.73
1.010
1.044
1.071
1.099
1.122
25.60
26.52
27.20
27.91
28.50
CH-865
CH-861
CH-863
CH-867
CH-869
TR-25
TR-23
TR-24
TR-26
TR-27
CH-866
CH-862
CH-864
CH-868
CH-870
TR-25-A
TR-23-A
TR-24-A
TR-26-A
TR-27-A
MT-15
MT-15
MT-15
MT-16
MT-16
1 1/4"-13
1 1/4"-14
1 1/4"-15
1 1/4"-16
1.041
1.060
1.087
1.087
26.44
26.92
27.61
27.61
1.150
1.169
1.196
1.196
29.21
29.69
30.38
30.38
CH-871
CH-873
CH-875
CH-875
TR-28
TR-29
TR-30
TR-30
CH-872
CH-874
CH-876
CH-876
TR-28-A
TR-29-A
TR-30-A
TR-30-A
MT-17
MT-17
MT-17
MT-17
1 3/8"- 8
1 3/8"- 9
1 3/8"-10
1 3/8"-11
1 3/8"-12
1.026
1.060
1.087
1.115
1.133
26.06
26.92
27.61
28.32
28.78
1.135
1.169
1.196
1.224
1.242
28.83
29.69
30.38
31.09
31.55
CH-877
CH-873
CH-875
CH-879
CH-881
TR-31
TR-29
TR-30
TR-30
TR-32
CH-878
CH-874
CH-876
CH-880
CH-882
TR-31-A
TR-29-A
TR-30-A
TR-30-A
TR-32-A
MT-17
MT-17
MT-17
MT-18
MT-18
1 3/8"-13
1 3/8"-14
1 3/8"-15
1 3/8"-16
1.160
1.179
1.206
1.206
29.46
29.95
30.63
30.63
1.275
1.294
1.321
1.321
32.38
32.87
33.55
33.55
CH-883
CH-885
CH-887
CH-887
TR-33
TR-34
TR-35
TR-35
CH-884
CH-886
CH-888
CH-888
TR-33-A
TR-34-A
TR-35-A
TR-35-A
MT-19
MT-20
MT-20
MT-20
1 1/2"- 8
1 1/2"- 9
1 1/2"-10
1 1/2"-11
1 1/2"-12
1.145
1.179
1.206
1.235
1.257
29.08
29.95
30.63
31.37
31.93
1.260
1.294
1.321
1.350
1.372
32.00
32.87
33.55
34.29
34.85
CH-889
CH-885
CH-887
CH-891
CH-893
TR-34
TR-34
TR-35
TR-36
TR-37
CH-890
CH-886
CH-888
CH-892
CH-894
TR-34-A
TR-34-A
TR-35-A
TR-36-A
TR-37-A
MT-19
MT-20
MT-20
MT-20
MT-20
1 1/2"-13
1 1/2"-14
1 1/2"-15
1 1/2"-16
1.285
1.285
1.331
1.331
32.64
32.64
33.81
33.81
1.400
1.400
1.446
1.446
35.56
35.56
36.73
36.73
CH-895
CH-895
CH-897
CH-897
TR-37
TR-37
TR-38
TR-38
CH-896
CH-896
CH-898
CH-898
TR-37-A
TR-37-A
TR-38-A
TR-38-A
MT-21
MT-21
MT-21
MT-21
1 3/4"- 8
1.406
35.70
1.531
38.90
CH-899
TR-38
CH-899RL
TR-38-A
MT-22
3/8"
3/8"
3/8"
1/2"
1/2"
1/2"
1/2"
1/2"

TUBE EXPANDERS
Selection Guide:
Model : CH 800
five roll type
expander
Tube Size I.D. .500" - 1.457"
(12.7 - 37.0 mm)
TUBE
O.D.
AND
G.A.
10
MIN. I.D. TUBE

TOOL ENTERS
TUBE SHEET
THICKNESS
Tubesheet
A
MINIMUM
B
MAXIMUM
TUBE EXPANDER WITH

1 1/2" ROLL LENGTH
1/4"
(6.35 mm)
1 1/4"
(31.75 mm)
TUBE EXPANDER WITH

2 1/4" ROLL LENGTH
1"
(25.40 mm)
2"
(50.80 mm)
Tubesheet
MAX. TOOL
EXPANSION
Inch
mm
Inch
mm
5/8"-17-19
5/8"-20-22
5/8"-23-24
.499
.539
.550
12.67
13.70
13.97
.578
.601
.627
14.69
15.27
15.93
3/4"-13-14
3/4"-15-16
3/4"-17-18
3/4"-19-21
3/4"-22-24
.550
.596
.619
.642
.670
13.97
15.14
15.72
16.31
17.02
.627
.688
.706
.730
.750
15.93
17.21
17.94
18.56
19.05
SIZE
SQUARE
ON
MANDREL
3/8"
3/8"
1/2"
EXPANDER WITH
1 1/2" (38.1 mm) ROLLS
EXPANDER
NO.
EXPANDER WITH
2 1/4" (57.1 mm) ROLLS
ROLL SET EXPANDER

NO.
NO.
MANDREL
NO.
ROLL SET
NO.
CH-815-5
CH-819-SP-5
CH-821-5
TR- 4-5
TR- 4-5
TR- 5-5
CH-816-5
TR- 4-A-5
CH-820-SP-5 TR- 4-A-5
CH-822-5
TR- 5-A-5
MT- 9
MT-11
MT-12
CH-821-5
CH-827-5
CH-829-5
CH-831-5
CH-833-5
TR- 5-5
TR- 8-5
TR- 8-5
TR- 9-5
TR- 9-5
CH-822-5
CH-828-5
CH-830-5
CH-832-5
CH-834-5
MT-12
MT-12
MT-13
MT-13
MT-14
NOTE: for TECO four and five roll expanders we recommend a thin wall thrust collar, especially for 19-24 Gauge wall.
TR- 5-A-5
TR- 8-A-5
TR- 8-A-5
TR- 9-A-5
TR- 9-A-5
TUBE
O.D.
AND
G.A.
MIN. I.D. TUBE

TOOL ENTERS
MAX. TOOL
EXPANSION
Inch
mm
Inch
mm
7/8"-13
7/8"-14
7/8"-15-16
.670
.685
.712
17.02
17.40
18.08
.750
.770
.807
19.05
19.56
20.50
7/8"-17-18
7/8"-19-22
7/8"-23-24
.740
.763
.791
18.80
19.38
20.09
.826
.848
.892
1 -12
1"-13
1"-14
.763
.791
.810
19.38
20.09
20.57
1"-15-16
1"-17-20
1"-21-24
.837
.865
.883
1 1/8"-11
1 1/8"-12
1 1/8"-13-14
.865
.883
.916
SIZE
SQUARE
ON
MANDREL
EXPANDER WITH
1 1/2" (38.1 mm) ROLLS
EXPANDER
NO.
EXPANDER WITH
2 1/4" (57.1 mm) ROLLS
ROLL SET EXPANDER

NO.
NO.
MANDREL
NO.
ROLL SET
NO.
CH-833-5
CH-835-5
CH-837-5
TR- 9-5
TR-10-5
TR-11-5
CH-834-5
CH-836-5
CH-838-5
TR- 9-A-5
TR-10-A-5
TR-11-A-5
MT-14
MT-14
MT-16
20.98
21.65
22.65
CH-843-5
CH-845-5
CH-847-5
TR-11-5
TR-12-5
TR-13-5
CH-844-5
CH-846-5
CH-848-5
TR-11-A-5
TR-12-A-5
TR-13-A-5
MT-17
MT-17
MT-18
.848
.892
.904
21.65
22.65
22.97
CH-845-5
CH-847-5
CH-849-5
TR-12-5
TR-13-5
TR-14-5
CH-846-5
CH-848-5
CH-850-5
TR-12-A-5
TR-13-A-5
TR-14-A-5
MT-17
MT-18
MT-18
21.26
21.97
22.43
.933
.971
.999
23.69
24.67
25.38
CH-851-5
CH-855-5
CH-857-5
TR-15-5
TR-15-5
TR-15-5
CH-852-5
CH-856-5
CH-858-5
TR-15-A-5
TR-15-A-5
TR-15-A-5
MT-18
MT-20
MT-21
21.97
22.43
23.57
.971
.999
1.013
24.67
25.38
25.74
CH-855-5
CH-857-5
CH-859-5
TR-15-5
TR-15-5
TR-16-5
CH-856-5
CH-858-5
CH-860-5
TR-15-A-5
TR-15-A-5
TR-16-A-5
MT-20
MT-21
MT-21
1 1/8"-15-16 .962
1 1/8"-17-20 .990
1 1/8"-21-24 1.013
24.43
25.15
25.73
1.064
1.091
1.118
27.02
27.72
28.40
CH-863-5
CH-867-5
CH-869-5
TR-18-5
TR-19-5
TR-21-5
CH-864-5
CH-868-5
CH-870-5
TR-18-A-5
TR-19-A-5
TR-21-A-5
MT-21
MT-21
MT-21
1 1/4"-10
1 1/4"-11
1 1/4"-12
.962
.990
1.013
24.43
25.15
25.73
1.064
1.091
1.118
27.02
27.72
28.40
CH-863-5
CH-867-5
CH-869-5
TR-18-5
TR-19-5
TR-21-5
CH-864-5
CH-868-5
CH-870-5
TR-18-A-5
TR-19-A-5
TR-21-A-5
MT-21
MT-21
MT-21
1 1/4"-15-16 1.087
1 1/4"-17-22 1.115
1 1/4"-23-25 1.133
27.61
28.32
28.78
1.204
1.259
1.285
30.58
31.98
32.64
CH-875-5
CH-879-5
CH-881-5
TR-21-5
TR-23-5
TR-24-5
CH-876-5
CH-880-5
CH-882-5
TR-21-A-5
TR-23-A-5
TR-24-A-5
MT-22
MT-22
MT-22
1 3/8"-12
1 3/8"-14
1.133
1.179
28.78
29.95
1.285
1.294
32.64
32.88
1/2"
CH-881-5
CH-885-5
TR-24-5
TR-23-5
CH-882-5
CH-886-5
TR-24-A-5
TR-23-A-5
MT-22
MT-23
1 1/2"-12
1.257
1 1/2"-17-24 1.374
31.93
34.90
1.375
1.505
34.92
38.22
1/2"
CH-893-5
CH-899-5
TR-26-5
TR-29-5
CH-894-5
TR-26-A-5
CH-899-RL-5 TR-29-A-5
MT-24
MT-25
1/2"
1/2"
1/2"
1/2"
Also available as four roll expander, sizes as five roll expanders.

11

TUBE EXPANDERS
Selection Guide:
Model : CH 1200
Tube Size I.D. .335" - 1.457"
(8.5 - 37.0 mm)
Minimum
Tubesheet
Expanders with 1 1/2" (38.1mm) long rolls will

accommodate tube sheet thickness as follows:
STANDARD REACH.... 3/4" to 5 7/8"
(19.05 mm to 149.22 mm)
"B" REACH....
3/4" to 10"
(19.05 mm to 254.00 mm)
"C" REACH....
3/4" to 12"
(19.05 mm to 304.80 mm)

STANDARD REACH.... 1 1/2" to 6 1/2" (38.1 mm to 165.10 mm)
"B" REACH....
1 1/2" to 10 3/4" (38.1 mm to 273.05 mm)
"C" REACH....
1 1/2" to 12 3/4" (38.1 mm to 323.85 mm)
TUBE
O.D.
AND
G.A.
MIN. I.D. TUBE

TOOL ENTERS
MAX. TOOL
EXPANSION
Inch
mm
Inch
mm
1/2"-14
1/2"-15
1/2"-16
1/2"-17
1/2"-18
.324
.349
.360
.374
.392
8.23
8.86
9.14
9.50
9.96
.374
.398
.410
.424
.447
9.50
10.11
10.41
10.77
11.35
5/8"-12
5/8"-13
5/8"-14
5/8"-15
.392
.425
.449
.471
9.96
10.79
11.40
11.96
.447
.480
.509
.536
11.35
12.19
12.73
13.61
5/8"-16
5/8"-17
5/8"-18
.485
.499
.517
12.32
12.67
13.13
.550
.564
.572
3/4"-10
3/4"-11
3/4"-12
3/4"-13
3/4"-14
.471
.499
.522
.550
.574
11.96
12.67
13.30
13.97
14.58
3/4"-15
3/4"-16
3/4"-17
3/4"-18
.596
.605
.619
.619
15.14
15.37
15.72
15.72
Maximum
Tubesheet
SIZE
SQUARE
ON
MANDREL
Longer reaches available upon request in 2 inch (50.8 mm) increments.
EXPANDER WITH
1 1/2" (38.1 mm) ROLLS
EXPANDER
NO.
EXPANDER WITH
2 1/4" (57.1 mm) ROLLS
ROLL SET EXPANDER

NO.
NO.
MANDREL
NO.
ROLL SET
NO.
CH-1197
CH-1199
CH-1201
CH-1203
CH-1205
TR-797
TR-1
TR-1
TR-2
TR-3
MT-1197
MT-1199
MT-51
MT-51
MT-52
CH-1205
CH-1207
CH-1209
CH-1211
TR-3
TR-4
TR-4
TR-5
CH-1210
CH-1212
TR-4-A
TR-5-A
MT-52
MT-53
MT-54
MT-55
13.97
14.32
14.53
CH-1213
CH-1215
CH-1217
TR-6
TR-6
TR-7
CH-1214
CH-1216
CH-1218
TR-6-A
TR-6-A
TR-7-A
MT-55
MT-56
MT-57
.536
.564
.582
.615
.639
13.61
14.32
15.20
15.62
16.23
CH-1211
CH-1215
CH-1219-N
CH-1221
CH-1223
TR-5
TR-6
TR-7
TR-8
TR-9
CH-1212
CH-1216
CH-1220-N
CH-1222
CH-1224
TR-5-A
TR-6-A
TR-7-A
TR-8-A
TR-9-A
MT-55
MT-56
MT-58
MT-58
MT-58
.661
.685
.699
.699
16.79
17.40
17.75
17.75
CH-1225
CH-1227
CH-1229
CH-1229
TR-10
TR-10
TR-11
TR-11
CH-1226
CH-1228
CH-1230
CH-1230
TR-10-A
TR-10-A
TR-11-A
TR-11-A
MT-58
MT-59
MT-59
MT-59
3/8"
3/8"
3/8"
12

TUBE
O.D.
AND
G.A.
MIN. I.D. TUBE

TOOL ENTERS
Inch
mm
MAX. TOOL
EXPANSION
Inch
mm
7/8"-10
7/8"-11
7/8"-12
7/8"-13
7/8"-14
.596
.619
.642
.670
.685
15.14
15.72
16.31
17.02
17.40
.661
.699
.722
.750
.774
16.79
17.75
18.34
19.05
19.66
7/8"-15
7/8"-16
7/8"-17
7/8"-18
.712
.726
.740
.740
18.08
18.44
18.80
18.80
.801
.815
.829
.829
1" - 8
1" - 9
1" -10
1" -11
1" -12
1" -13
.655
.685
.712
.740
.763
.791
16.64
17.40
18.08
18.80
19.38
20.09
1" -14
1" -15
1" -16
1" -17
1" -18-20
.810
.837
.837
.865
.865
1 1/8"- 8
1 1/8"- 9
1 1/8"-10
1 1/8"-11
SIZE
SQUARE
ON
MANDREL
EXPANDER WITH
1 1/2" (38.1 mm) ROLLS
EXPANDER
NO.
EXPANDER WITH
2 1/4" (57.1 mm) ROLLS
ROLL SET EXPANDER

NO.
NO.
MANDREL
NO.
ROLL SET
NO.
CH-1225
CH-1229
CH-1231
CH-1233
CH-1235
TR-10
TR-11
TR-12
TR-13
TR-14
CH-1226
CH-1230
CH-1232
CH-1234
CH-1236
TR-10-A
TR-11-A
TR-12-A
TR-13-A
TR-14-A
MT-58
MT-59
MT-59
MT-60
MT-61
20.34
20.70
21.06
21.06
CH-1237
CH-1239
CH-1243
CH-1243
TR-15
TR-15
TR-16
TR-16
CH-1238
CH-1240
CH-1244
CH-1244
TR-15-A
TR-15-A
TR-16-A
TR-16-A
MT-61
MT-62
MT-62
MT-62
.735
.774
.801
.829
.852
.880
18.67
19.66
20.34
21.06
21.64
22.35
CH-1241
CH-1235
CH-1237
CH-1243
CH-1245
CH-1247
TR-13
TR-14
TR-15
TR-16
TR-17
TR-18
CH-1242
CH-1236
CH-1238
CH-1244
CH-1246
CH-1248
TR-13-A
TR-14-A
TR-15-A
TR-16-A
TR-17-A
TR-18-A
MT-59
MT-61
MT-61
MT-62
MT-62
MT-62
20.57
21.26
21.26
21.97
21.97
.909
.936
.936
.964
.964
23.09
23.77
23.77
24.48
24.48
CH-1249
CH-1251
CH-1251
CH-1255
CH-1255
TR-18
TR-19
TR-19
TR-21
TR-21
CH-1250
CH-1252
CH-1252
CH-1256
CH-1256
TR-18-A
TR-19-A
TR-19-A
TR-21-A
TR-21-A
MT-63
MT-63
MT-63
MT-63
MT-63
.776
.810
.837
.865
19.71
20.57
21.26
21.97
.875
.909
.936
.964
22.22
23.09
23.77
24.48
CH-1253
CH-1249
CH-1251
CH-1255
TR-20
TR-18
TR-19
TR-21
CH-1254
CH-1250
CH-1252
CH-1256
TR-20-A
TR-18-A
TR-19-A
TR-21-A
MT-63
MT-63
MT-63
MT-63
1 1/8"-12
1 1/8"-13
1 1/8"-14
1 1/8"-15
.883
.916
.835
.962
22.43
23.57
23.75
24.43
.982
1.015
1.044
1.071
24.94
25.78
26.52
27.20
CH-1257
CH-1259
CH-1261
CH-1263
TR-21
TR-22
TR-23
TR-24
CH-1258
CH-1260
CH-1262
CH-1264
TR-21-A
TR-22-A
TR-23-A
TR-24-A
MT-64
MT-64
MT-65
MT-65
1 1/8"-16
1 1/8"-17
1 1/8"-18
.962
.990
.990
24.43
25.15
25.15
1.071
1.099
1.099
27.20
27.91
27.91
CH-1263
CH-1267
CH-1267
TR-24
TR-26
TR-26
CH-1264
CH-1268
CH-1268
TR-24-A
TR-26-A
TR-26-A
MT-65
MT-66
MT-66
1 1/4"- 8
1 1/4"- 9
1 1/4"-10
1 1/4"-11
1 1/4"-12
.901
.935
.962
.990
1.013
22.88
23.75
24.43
25.15
25.73
1.010
1.044
1.071
1.099
1.122
25.60
26.52
27.20
27.91
28.50
CH-1265
CH-1261
CH-1263
CH-1267
CH-1269
TR-25
TR-23
TR-24
TR-26
TR-27
CH-1266
CH-1262
CH-1264
CH-1268
CH-1270
TR-25-A
TR-23-A
TR-24-A
TR-26-A
TR-27-A
MT-65
MT-65
MT-65
MT-66
MT-66
1 1/4"-13
1 1/4"-14
1 1/4"-15
1 1/4"-16
1.041
1.060
1.087
1.087
26.44
26.92
27.61
27.61
1.150
1.169
1.196
1.196
29.21
29.69
30.38
30.38
CH-1271
CH-1273
CH-1275
CH-1275
TR-28
TR-29
TR-30
TR-30
CH-1272
CH-1274
CH-1276
CH-1276
TR-28-A
TR-29-A
TR-30-A
TR-30-A
MT-67
MT-67
MT-67
MT-67
1 3/8"- 8
1 3/8"- 9
1 3/8"-10
1 3/8"-11
1 3/8"-12
1.026
1.060
1.087
1.115
1.133
26.06
26.92
27.61
28.32
28.78
1.135
1.169
1.196
1.224
1.242
28.83
29.69
30.38
31.09
31.55
CH-1277
CH-1273
CH-1275
CH-1279
CH-1281
TR-31
TR-29
TR-30
TR-30
TR-32
CH-1278
CH-1274
CH-1276
CH-1280
CH-1282
TR-31-A
TR-29-A
TR-30-A
TR-30-A
TR-32-A
MT-67
MT-67
MT-67
MT-68
MT-68
1 3/8"-13
1 3/8"-14
1 3/8"-15
1 3/8"-16
1.160
1.179
1.206
1.206
29.46
29.95
30.63
30.63
1.275
1.294
1.321
1.321
32.38
32.87
33.55
33.55
CH-1283
CH-1285
CH-1287
CH-1287
TR-33
TR-34
TR-35
TR-35
CH-1284
CH-1286
CH-1288
CH-1288
TR-33-A
TR-34-A
TR-35-A
TR-35-A
MT-69
MT-70
MT-70
MT-70
1 1/2"- 8
1 1/2"- 9
1 1/2"-10
1 1/2"-11
1 1/2"-12
1.145
1.179
1.206
1.235
1.257
29.08
29.95
30.63
31.37
31.93
1.260
1.294
1.321
1.350
1.372
32.00
32.87
33.55
34.29
34.85
CH-1289
CH-1285
CH-1287
CH-1291
CH-1293
TR-34
TR-34
TR-35
TR-36
TR-37
CH-1290
CH-1286
CH-1288
CH-1292
CH-1294
TR-34-A
TR-34-A
TR-35-A
TR-36-A
TR-37-A
MT-69
MT-70
MT-70
MT-70
MT-70
1 1/2"-13
1 1/2"-14
1 1/2"-15
1 1/2"-16
1.285
1.285
1.331
1.331
32.64
32.64
33.81
33.81
1.400
1.400
1.446
1.446
35.56
35.56
36.73
36.73
CH-1295
CH-1295
CH-1297
CH-1297
TR-37
TR-37
TR-38
TR-38
CH-1296
CH-1296
CH-1298
CH-1298
TR-37-A
TR-37-A
TR-38-A
TR-38-A
MT-71
MT-71
MT-71
MT-71
1 3/4"- 8
1.406
35.70
1.531
38.90
CH-1299
TR-38
CH-1299RL
TR-38-A
MT-72
3/8"
3/8"
3/8"
1/2"
1/2"
1/2"
1/2"
1/2"
13

TUBE EXPANDERS
Selection Guide:
Model : CH 1200
five roll type
expander
Tube Size I.D. .500" - 1.457"
(12.7 - 37.0 mm)
Minimum
Tubesheet

STANDARD REACH.... 3/4" to 5 7/8"
(19.05 mm to 149.22 mm)
"B" REACH....
3/4" to 10"
(19.05 mm to 254.00 mm)
"C" REACH....
3/4" to 12"
(19.05 mm to 304.80 mm)

STANDARD REACH.... 1 1/2" to 6 1/2" (38.1 mm to 165.10 mm)
"B" REACH....
1 1/2" to 10 3/4" (38.1 mm to 273.05 mm)
"C" REACH....
1 1/2" to 12 3/4" (38.1 mm to 323.85 mm)
TUBE
O.D.
AND
G.A.
14
MIN. I.D. TUBE

TOOL ENTERS
MAX. TOOL
EXPANSION
Inch
mm
Inch
mm
5/8"-17-19
5/8"-20-22
5/8"-23-24
.499
.539
.550
12.67
13.70
13.97
.578
.601
.627
14.69
15.27
15.93
3/4"-13-14
3/4"-15-16
3/4"-17-18
3/4"-19-21
3/4"-22-24
.550
.596
.619
.642
.670
13.97
15.14
15.72
16.31
17.02
.627
.688
.706
.730
.750
15.93
17.21
17.94
18.56
19.05
Maximum
Tubesheet
SIZE
SQUARE
ON
MANDREL
3/8"
3/8"
1/2"
Longer reaches available upon request in 2 inch (50.8 mm) increments.
EXPANDER WITH
1 1/2" (38.1 mm) ROLLS
EXPANDER
NO.
EXPANDER WITH
2 1/4" (57.1 mm) ROLLS
ROLL SET EXPANDER

NO.
NO.
MANDREL
NO.
ROLL SET
NO.
CH-1215-5
CH-1219-SP-5
CH-1221-5
TR- 4-5
TR- 4-5
TR- 5-5
CH-1216-5
TR- 4-A-5
CH-1220-SP-5 TR- 4-A-5
CH-1222-5
TR- 5-A-5
MT-59
MT-61
MT-62
CH-1221-5
CH-1227-5
CH-1229-5
CH-1231-5
CH-1233-5
TR- 5-5
TR- 8-5
TR- 8-5
TR- 9-5
TR- 9-5
CH-1222-5
CH-1228-5
CH-1230-5
CH-1232-5
CH-1234-5
MT-62
MT-62
MT-63
MT-63
MT-64
TR- 5-A-5
TR- 8-A-5
TR- 8-A-5
TR- 9-A-5
TR- 9-A-5
TUBE
O.D.
AND
G.A.
MIN. I.D. TUBE

TOOL ENTERS
Inch
MAX. TOOL
EXPANSION
mm
Inch
mm
7/8"-13
7/8"-14
7/8"-15-16
.670
.685
.712
17.02
17.40
18.08
.750
.770
.807
19.05
19.56
20.50
7/8"-17-18
7/8"-19-22
7/8"-23-24
.740
.763
.791
18.80
19.38
20.09
.826
.848
.892
1"-12
1"-13
1"-14
.763
.791
.810
19.38
20.09
20.57
1"-15-16
1"-17-20
1"-21-24
.837
.865
.883
1 1/8"-11
1 1/8"-12
1 1/8"-13-14
SIZE
SQUARE
ON
MANDREL
EXPANDER WITH
1 1/2" (38.1 mm) ROLLS
EXPANDER
NO.
EXPANDER WITH
2 1/4" (57.1 mm) ROLLS
ROLL SET EXPANDER

NO.
NO.
MANDREL
NO.
ROLL SET
NO.
CH-1233-5
CH-1235-5
CH-1237-5
TR- 9-5
TR-10-5
TR-11-5
CH-1234-5
CH-1236-5
CH-1238-5
TR- 9-A-5
TR-10-A-5
TR-11-A-5
MT-64
MT-64
MT-66
20.98
21.65
22.65
CH-1243-5
CH-1245-5
CH-1247-5
TR-11-5
TR-12-5
TR-13-5
CH-1244-5
CH-1246-5
CH-1248-5
TR-11-A-5
TR-12-A-5
TR-13-A-5
MT-67
MT-67
MT-68
.848
.892
.904
21.65
22.65
22.97
CH-1245-5
CH-1247-5
CH-1249-5
TR-12-5
TR-13-5
TR-14-5
CH-1246-5
CH-1248-5
CH-1250-5
TR-12-A-5
TR-13-A-5
TR-14-A-5
MT-67
MT-68
MT-68
21.26
21.97
22.43
.933
.971
.999
23.69
24.67
25.38
CH-1251-5
CH-1255-5
CH-1257-5
TR-15-5
TR-15-5
TR-15-5
CH-1252-5
CH-1256-5
CH-1258-5
TR-15-A-5
TR-15-A-5
TR-15-A-5
MT-68
MT-70
MT-71
.865
.883
.916
21.97
22.43
23.57
.971
.999
1.013
24.67
25.38
25.74
CH-1255-5
CH-1257-5
CH-1259-5
TR-15-5
TR-15-5
TR-16-5
CH-1256-5
CH-1258-5
CH-1260-5
TR-15-A-5
TR-15-A-5
TR-16-A-5
MT-70
MT-71
MT-71
1 1/8"-15-16
1 1/8"-17-20
1 1/8"-21-24
.962
.990
1.013
24.43
25.15
25.73
1.064
1.091
1.118
27.02
27.72
28.40
CH-1263-5
CH-1267-5
CH-1269-5
TR-18-5
TR-19-5
TR-21-5
CH-1264-5
CH-1268-5
CH-1270-5
TR-18-A-5
TR-19-A-5
TR-21-A-5
MT-71
MT-71
MT-71
1 1/4"-10
1 1/4"-11
1 1/4"-12
.962
.990
1.013
24.43
25.15
25.73
1.064
1.091
1.118
27.02
27.72
28.40
CH-1263-5
CH-1267-5
CH-1269-5
TR-18-5
TR-19-5
TR-21-5
CH-1264-5
CH-1268-5
CH-1270-5
TR-18-A-5
TR-19-A-5
TR-21-A-5
MT-71
MT-71
MT-71
1 1/4"-15-16
1 1/4"-17-22
1 1/4"-23-25
1.087
1.115
1.133
27.61
28.32
28.78
1.204
1.259
1.285
30.58
31.98
32.64
CH-1275-5
CH-1279-5
CH-1281-5
TR-21-5
TR-23-5
TR-24-5
CH-1276-5
CH-1280-5
CH-1282-5
TR-21-A-5
TR-23-A-5
TR-24-A-5
MT-72
MT-72
MT-72
1 3/8"-12
1 3/8"-14
1.133
1.179
28.78
29.95
1.285
1.294
32.64
32.88
1/2"
CH-1281-5
CH-1285-5
TR-24-5
TR-23-5
CH-1282-5
CH-1286-5
TR-24-A-5
TR-23-A-5
MT-72
MT-73
1 1/2" -12
1 1/2"-17-24
1.257
1.374
31.93
34.90
1.375
1.505
34.92
38.22
1/2"
CH-1293-5
CH-1299-5
TR-26-5
TR-29-5
CH-1294-5
TR-26-A-5
CH-1299-RL-5 TR-29-A-5
MT-74
MT-75
1/2"
1/2"
1/2"
1/2"
Also available as four roll expander, sizes as five roll expander.

15

TUBE EXPANDERS
Selection Guide:
Model : CH 8012
Tube Size I.D. 1.431" - 4.000"
(36.5 - 101.6 mm)
Tubesheet
TUBE SHEET
THICKNESS
16
MIN. I.D. TUBE

TOOL ENTERS
TUBE EXPANDER WITH

2 1/4" ROLL LENGTH
A
MINIMUM
B
MAXIMUM
1/4"
(6.35 mm)
3 3/4"
(95.25 mm)
Tubesheet
TUBE
O.D.
AND
G.A.
MAX. TOOL
EXPANSION
Inch
mm
Inch
mm
1 3/4"- 9-10
1 3/4"-11
1 3/4"-12
1 3/4"-13
1 3/4"-14
1.420
1.452
1.480
1.507
1.532
36.10
36.90
37.60
38.30
38.90
1.617
1.637
1.659
1.687
1.711
41.08
41.58
42.14
42.84
43.46
2"- 6-7
2"- 8-10
2"-11
2"-12
2"-13-16
1.563
1.625
1.662
1.685
1.724
39.70
41.30
42.00
42.80
43.80
1.791
1.859
1.888
1.910
1.949
45.51
47.23
47.95
48.51
49.51
2 1/4"- 5
2 1/4"- 6- 7
2 1/4"- 8-10
2 1/4"-11
2 1/4"-12
2 1/4"-13-16
1.788
1.839
1.882
1.921
1.933
1.936
45.40
46.70
47.80
48.50
49.10
49.80
2.019
2.069
2.109
2.137
2.159
2.187
51.28
52.56
53.56
54.28
54.84
55.56
Note: Expander CH 8012 is also available as four or five roll expander.
SIZE
SQUARE
ON
MANDREL
EXPANDER WITH 2 1/4" (57.1 mm) ROLLS
MANDREL
NO.
EXPANDER
NO.
ROLL SET
NO.
3/4"
CH-8012-1 3/4-10
CH-8012-1 3/4-11
CH-8012-1 3/4-12
CH-8012-1 3/4-13
CH-8012-1 3/4-14
TR-37-A
TR-42
TR-44
TR-46
TR-48
MT-90
MT-90
MT-90
MT-90
MT-90
3/4"
CH-8012-2-6-7
CH-8012-2-8-10
CH-8012-2-11
CH-8012-2-12
CH-8012-2-13-16
TR-48
TR-50
TR-52
TR-54
TR-56
MT-91
MT-91
MT-91
MT-91
MT-91
CH-8012-2 1/4- 5
CH-8012-2 1/4- 6- 7
CH-8012-2 1/4- 8-10
CH-8012-2 1/4-11
CH-8012-2 1/4-12
CH-8012-2 1/4-13-16
TR-50
TR-54
TR-56
TR-58
TR-60
TR-62
MT-92
MT-92
MT-92
MT-92
MT-92
MT-92
3/4"
TUBE
O.D.
AND
G.A.
MIN. I.D. TUBE

TOOL ENTERS
MAX. TOOL
EXPANSION
Inch
mm
Inch
mm
2 1/2"-5-7
2 1/2"-8-12
2 1/2"-13-16
2.043
2.134
2.232
51.90
54.20
56.70
2.348
2.409
2.437
59.64
61.20
61.90
2 3/4"-5-7
2 3/4"-8-14
2.291
2.366
58.20
60.10
2.598
2.673
65.98
67.90
3"-3-4
3"-5
3"-6-7
3"-8-14
2.449
2.478
2.547
2.618
62.20
62.90
64.70
66.50
2.752
2.791
2.867
2.924
69.90
70.90
72.82
74.26
3 1/4"-5-9
3 1/4"-7-14
2.744
2.871
69.70
72.90
3.045
3.174
77.35
80.63
3 1/2"-7-13
3 1/2"-8-14
3 1/2"-11-18
3.043
3.122
3.224
77.30
79.30
81.90
3.361
3.440
3.543
85.38
87.38
89.98
4"-6-11
4"-10-16
4"-12-18
3.575
3.701
3.732
90.80
94.00
94.80
3.898
4.014
4.050
4 1/4"-8-12
3.851
97.80
4 1/2"-2-3
3.851
97.80
SIZE
SQUARE
ON
MANDREL
EXPANDER
NO.
MANDREL
NO.
ROLL SET
NO.
CH-8012-2 1/2- 5- 7
CH-8012-2 1/2- 8-12
CH-8012-2 1/2-13-16
TR-62
TR-64
TR-64
MT-96
MT-93
MT-94
CH-8012-2 3/4- 5- 7
CH-8012-2 3/4- 8-14
TR-64
TR-66
MT-96
MT-96
CH-8012-3-3-4
CH-8012-3-5
CH-8012-3-6-7
CH-8012-3-8-14
TR-64
TR-64
TR-66
TR-67
MT-97-SP
MT-98
MT-98
MT-96
CH-8012-3 1/4- 5- 9
CH-8012-3 1/4- 7-14
TR-67
TR-68
MT-97
MT-97
1"
CH-8012-3 1/2- 7-13

CH-8012-3 1/2- 8-14
CH-8012-3 1/2-11-18
TR-69
TR-69
TR-70
MT-98
MT-99
MT-99
99.00
100.96
102.86
1"
CH-8012-4-6-11
CH-8012-4-10-16
CH-8012-4-12-18
TR-71
TR-72
TR-71
MT-99
MT-99
MT-100
4.179
105.76
1"
CH-8012-4 1/4- 8-12
TR-72
MT-100
4.179
105.76
1"
CH-8012-4 1/2- 2- 3
TR-72
MT-100
Note: Expander CH 8012 is also available as four or five roll expander.
1"
EXPANDER WITH 2 1/4" (57.1 mm) ROLLS
3/4"
1"
1"
1"
17

TBE SERIES BOILER TUBE EXPANDERS
Selection Guide:
Model : TBE
Tube Size I.D. 0.75" - 3.78"
(19 - 96 mm)
Designed for flaring and expanding of tubes in Boilers,

Superheaters, Waterwalls and Economizers.
TOOL
NO.
MIN.
I.D.
TUBE
TOOL
MAX.
TOOL
EXPANSION
STD.
ROLL
LENGHT
O.A.L.
ROLL
EXPANSION
& FLARE
mm
Inch
mm
Inch
mm
Inch
TBE-19
TBE-20
TBE-22
TBE-23
TBE-24
19
20
22
23
24
0.75
0.79
0.87
0.91
0.94
22
23
25
26
27
0.87
0.91
0.98
1.02
1.06
42
42
42
42
42
1.65
1.65
1.65
1.65
1.65
TBR-12
TBR-12
TBR-12
TBR-13
TBR-13
TBE-25
TBE-27
TBE-28
TBE-29
TBE-30
25
27
28
29
30
0.98
1.06
1.10
1.14
1.18
28
30
32
33
34
1.10
1.18
1.26
1.30
1.34
42
42
42
42
42
1.65
1.65
1.65
1.65
1.65
TBE-32
TBE-35
TBE-37
TBE-40
TBE-42
32
35
37
40
42
1.26
1.38
1.46
1.57
1.65
36
41
43
46
48
1.42
1.61
1.69
1.81
1.89
42
42
42
50
50
TBE-44
TBE-47
TBE-49
TBE-52
TBE-54
44
47
49
52
54
1.73
1.85
1.93
2.05
2.13
50
54
56
59
62
1.97
2.13
2.20
2.32
2.44
TBE-57
TBE-60
TBE-65
TBE-68
TBE-72
57
60
65
68
72
2.24
2.36
2.56
2.68
2.83
66
69
74
78
82
TBE-77
TBE-82
TBE-86
TBE-90
TBE-96
77
82
86
90
96
3.03
3.23
3.39
3.54
3.78
87
92
96
102
108
MANDREL
NO.
MANDREL
O.A.L.
SHORT
MANDREL
SET
(3 PCS)
SMS
O.A.L
mm
mm
Inch
TBM-19
TBM-20
TBM-22
TBM-23
TBM-24
195
195
195
195
195
7.68
7.68
7.68
7.68
7.68
1/2"
1/2"
1/2"
1/2"
1/2"
TBR-13
TBR-15
TBR-16
TBR-16
TBR-16
TBM-25
TBM-27
TBM-28
TBM-29
TBM-30
195
200
260
260
260
7.68
7.87
10.24
10.24
10.24
TBMS-28
TBMS-29
TBMS-30
175
175
175
6.89
6.89
6.89
1/2"
1/2"
3/4"
3/4"
3/4"
1.65
1.65
1.65
1.97
1.97
TBR-17
TBR-21
TBR-22
TBR-40
TBR-23
TBM-32
TBM-37
TBM-37
TBM-42
TBM-42
260
310
310
310
310
10.24
12.20
12.20
12.20
12.20
TBMS-32
TBMS-37
TBMS-37
TBMS-42
TBMS-42
175
188
188
205
205
6.89
7.40
7.40
8.07
8.07
3/4"
3/4"
3/4"
3/4"
3/4"
50
50
50
50
50
1.97
1.97
1.97
1.97
1.97
TBR-23
TBR-24
TBR-24
TBR-25
TBR-26
TBM-44
TBM-47
TBM-49
TBM-49
TBM-54
310
338
338
338
375
12.20
13.31
13.31
13.31
14.76
TBMS-44
TBMS-47
TBMS-49
TBMS-49
TBMS-54
205
218
218
218
230
8.07
8.58
8.58
8.58
9.06
3/4"
3/4"
3/4"
3/4"
3/4"
2.60
2.72
2.91
3.07
3.23
50
50
50
50
50
1.97
1.97
1.97
1.97
1.97
TBR-27
TBR-28
TBR-29
TBR-30
TBR-31
TBM-57
TBM-57
TBM-65
TBM-72
TBM-72
395
395
395
425
425
15.55
15.55
15.55
16.73
16.73
TBMS-57
TBMS-57
TBMS-65
TBMS-72
TBMS-72
235
235
235
255
255
9.25
9.25
9.25
10.04
10.04
3/4"
3/4"
3/4"
1"
1"
3.43
3.62
3.78
4.02
4.25
50
50
50
50
50
1.97
1.97
1.97
1.97
1.97
TBR-32
TBR-33
TBR-34
TBR-34
TBR-35
TBM-77
TBM-82
TBM-86
TBM-90
TBM-96
425
425
425
485
485
16.73
16.73
16.73
19.09
19.09
TBMS-77
TBMS-82
TBMS-86
TBMS-90
TBMS-96
255
255
255
275
275
10.04
10.04
10.04
10.83
10.83
1"
1"
1"
1"
1"
Extra roll length:

TBE-19 up to TBE-27, 30 mm (1.18") OR 50 mm (1.97").
TBE-28 up to TBE-37, 30 mm (1.18") OR 50 mm (1.97") OR 60 mm (2.36") OR 70 mm (2.76").
TBE-40 up to TBE-96, 40 mm (1.57") OR 60 mm (2.36") OR 70 mm (2.76") OR 80 mm (3.15") OR 90 mm (3.54") OR 100 mm (3.94").
Expanders from TBE-35 to TBE-96 have metal roll retainer.
Expanders from TBE-19 to TBE-32 have pin hole rather than metal roll retainer.
If you order expander TBE-54 with rolls of 50 mm you should specify TBE-5450, with 60 mm TBE-5460.
18
SIZE
SQUARE
ON
MANDREL
Short mandrel set with shorter length on request.
Inch

TUBE EXPANDERS
Selection Guide:
Model : TTR 800

Tube Size I.D. .381" - 1.378"
(9.7 - 35 mm)
TECO TACK Rolling Tube Expander

Conical expander to expand the tube at the tube sheet
face, before tube to tubesheet welding.
EXPANDER NO.
MIN. TOOL
EXPANSION
MAX.
EXPANSION
SIZE SQUARE
ON MANDREL
ROLL SET NO.
MANDREL NO.
Inch
mm
Inch
mm
TTR-805
TTR-811
TTR-819
TTR-823
TTR-831
.381
.433
.480
.535
.602
9.7
11.0
12.2
13.6
15.3
.445
.531
.579
.634
.719
11.3
13.5
14.7
16.1
18.3
3/8 "
3/8 "
3/8 "
3/8 "
3/8 "
TR-3
TR-5
TR-7
TR-9
TR-12
MT-2
MT-5
MT-6
MT-8
MT-9
TTR-843
TTR-849
TTR-855
TTR-863
TTR-871
.701
.771
.826
.925
1.004
17.8
19.6
21.0
23.5
25.5
.827
.906
.961
1.067
1.146
21.0
23.0
24.4
27.1
29.1
3/8 "
3/8 "
3/8 "
1/2 "
1/2 "
TR-16
TR-18
TR-21
TR-24
TR-28
MT-12
MT-13
MT-13
MT-15
MT-17
TTR-881
TTR-885
TTR-895
TTR-899
1.094
1.142
1.248
1.378
27.8
29.0
31.7
35.0
1.240
1.291
1.394
1.528
31.5
32.8
35.4
38.8
1/2 "
1/2 "
1/2 "
1/2 "
TR-32
TR-34
TR-37
TR-38
MT-18
MT-20
MT-21
MT-22
Expansion range at the middle of roll length.
19

SPECIAL MODELS OF TUBE EXPANDERS
STEP EXPANDER Model: SL
(patented).
Designed to avoid destructive axial stress in welded
joints.
Among the many applications is expanding U-tubes in
welded joints on thick tube plates, whereby the tubes are
expanded after welding.
Automatic axial movement of the expander housing
during expansion, ensures that tube elongation
developed during this operation, is on the rear side of the
tube plate.
The TECO SL Step Expander automatically smooths
out the overlapping during expanding.
The range covered is for tubes from 3/8" to 1 11/32" (9 to
34 mm) I.D. and tube sheets thickness 2 9/16" to 27 1/2"
(65 to 698.5 mm).
On request the expander can be supplied with Teflon
bushings to prevent tube damage.
STEP BY STEP TUBE EXPANDER

This model expander is specially designed for thick tube
sheets.
Automatic overlapping of the rolling in stages.
For tubes 3/8" to 1 3/8" (9.5 mm to 34.9 mm) I.D.
and tube sheet thickness 2 1/2" to 27 1/2" (63.5 mm to
698.5 mm).
FIVE ROLL EXPANDER

Model: CH 800 AND CH 1200
A special line of expanders to expand thin wall tubes,
titanium, stainless steel and other high quality metals.
Available with special thrust collars, to eliminate the
possibility of the tube being drawn up inside the thrust
collar.
Reference pages 10-11 & 14-15.
TUBE EXPANDER Model: CC

Ideal for expanding tubes in thin tube sheets.
For tubes from 1/2" to 4 1/2" (12.7 mm to 114.3 mm) O.D..
Available with adjustable collar.
20

TUBE EXPANDER Model: SR
Ideally suited for tube rolling with minimum travel of
mandrel.
Expander mandrel is retained at rear to shorten mandrel
length and to allow use near tube bends or I.D. fixed
tubes.
TUBE EXPANDER Model: CL

Specially designed to enlarge the ends of non ferrous or
thin steel tubes so that another tube of the same
diameter can be inserted and welded or soldered.
All tube sizes covered.
Available with adjustable collar.
21

SPECIAL EXPANDERS FOR SUGAR
MILL EVAPORATORS
The diagram illustrates:

1 a Short-Body parallel rolling type expander to locate and
seal the tube in the upper tube plate and 2 the Long-Body
Sugar Refinery expander operated from tube sheet area.
22

ROLLING CONTROLS
AIR DRIVEN MOTORS TORQUE
CONTROLLED ROLLING MOTORS
Control expansion by accurate measurement of torque.
Automatically stops expansion accurately according to
predetermined setting. Assures uniformly tight tube
joints, prevents over- and under-expansion. This
provides maximum holding strength for individual tubes.
Strong, lightweight aluminium housing provides easier
handling, less fatigue.
Rugged drive combines precision control, which
measures torque output. All motors include a sensing
cam designed and engineered specifically for tube
expanding applications.
720
1753
850
1050-400
1550
MODEL
NO.
SPEED
MAXIMUM
MINIMUM
OVERALL
WEIGHT
SIDE TO
CENTER
AIR
DRIVE
TUBE
CHUCKS
CHUCKS
RPM
TORQUE
TORQUE
LENGHT
kg
CENTER
HOSE
CONSUMPTION
SQUARE
CAPACITIES
INCL.
OPT.
Nm
Nm
mm
mm
mm
l.min.
Inch
mm
720-2500B
2500
2.29
0.23
198
1.09
20.6
480
1/4"
1/4"
6.3
1/4" QC
3/8" QC
720-1800B
1800
3.05
0.23
200
1.09
20.6
480
1/4"
3/8"
9.5
1/4" QC
3/8" QC
720-550B
550
8.47
0.23
219
1.23
20.6
480
3/8"
1/2"
12.7
3/8" QC
1/4" QC
1.08
311
4.76
36.5
10
1344
3/8"
3/4"
19
3/8" QC
1/2" QC
850-1250A
1070
14.2
850-600A
490
26
1.63
311
4.76
36.5
10
1344
3/8"
1"
25.4
3/8" QC
1/2" QC & 3/4"
1050-400
390
35.8
4.5
346
6.35
50
13
1900
1/2"
1 - 1/4"
31.7
3/8" QC
1/2" QC & 3/4"
1550-900
760
1550-250
220
149
1753-R-190
190
1753-R-90
90
41.6
6.4
457
12.25
50
13
1960
1/2"
1 - 1/2"
38.1
3/8" QC
1/2" QC & 3/4"
19.4
457
12.25
50
13
1960
3/4"
2 - 1/2"
63.5
3/4" & 1"
1/2" QC & 3/4"
190
95
530
5.8
28
13
2000
5/8"
2 - 1/2"
63.5
3/4" & 1"
410
200
550
6.7
37
13
2000
3/4"
4"
101.5
3/4" & 1"
23

AUTO TUBE EXPANDING UNIT
INDEX
1. Transportable cabinet on wheels.
2
2. Overhead support arm.
3. Roll-A-Motor support.
4. Tool balancer.
5. Telescopic Universal Shaft.
4
6. Roll-A-Motor
7. Control Unit
8. Foot switch
9. Expander
7
5
6
9
1
24

AUTO TUBE EXPANDING UNIT
FEATURES
Easy to set up and use
Up-grades productivity
Improves quality
Complete repeatability of rolling torque
Semi or fully automatic operation
No motor weight or torque taken by the operator
Longer expander life
Four/five speed motors to cover most tube sizes
Low noise level
Telescopic spindle and foot switch operated
Hand held version available
25

CONTROL UNIT FOR ROLL-A-MOTORS
FEATURES
Based upon the latest technology in electronic control,

the Teco roll-a-motor control units use the same
processor as found in personal computers. Ultimate
reliability combined with speed and accuracy to give
completely repeatable torque control of the motor.
This latest technolgy enables very easy initial set up of
the equipment and eliminates the need to finely tune the
motors. Set-up is therefore quick and easy with no
special skills required by the operator.
Securely housed in an aluminium casing this control unit
is properly engineered to withstand the rigours of
workshop and site environment alike.
Latest computer technology.

Ultimate reliability
Completely accurate
Easy to set-up
Semi or fully automatic operation
Robust construction
Single or three phase versions
ROLL-A-MOTOR CONTROL UNIT
SELECTION GUIDE: ROLL-A-MOTOR CONTROL UNIT

Model No.
26
Voltage
Suitable for ROLL-A-MOTOR
CU-02-A- 42-5
42 volt A.C.
50 - 60 Hz.
Model 400 / 500 / 875 / 1000 / 1200
CU-02-A- 110-5
110 volt A.C.

50 - 60 Hz.
Model 400 / 500 / 875 / 1000 / 1200
CU-02-A- 220-5
230 volt A.C.

50 - 60 Hz.
Model 400 / 500 / 875 / 1000 / 1200
CU-02-A- 342-5
42 volt 3 Ph.
50 - 60 Hz.
Model TC-1 / TC-3 / TC-4 / TC-4-1 / TC-5
CU-02-A-3220-5
220 volt 3 Ph.

50 - 60 Hz.
CU-02-A-3380-5
400 volt 3 Ph.

50 - 60 Hz.
Note : For tube capacity see page 28-31.

CONTROL UNIT FOR ROLL-A-MOTORS
TECHNICAL SPECIFICATION
STANDARD FITTINGS
Voltage
Remote control (24 volts)
: 110 or 230 : 1 phase : 50/60 Hz

220 or 400 : 3 phase : 50/60 Hz
Power output
: 2200 watts for 1 phase

3000 watts for 3 phase
Dimensions
: L 56 cm x W 36 cm x H 18 cm
L 22" x W 14 11/64" x H 7 5/64"
Weight
: 15 kg
Optional
: Printer
Transformer to 42 volts
Digital read-out for programming

Digital read-out for torque
Reverse time setting 0 to 60 seconds
Interval time setting 0 to 60 seconds
Automatic phase corrector for 3 phase models
Flat panel, easy clean push buttons
Carrying handle
RS 232 connector for interface with
PC for read-out
ROLL-A-MOTOR CONTROL UNIT WITH TRANSFORMER
27

ROLL-A-MOTORS SINGLE PHASE
The TECO 'Roll-A-Motor' is ruggedly designed for low
and high torque capabilities.
Smooth running, frequent forward and reverse
operations together with a controlled output of the
amount of expansion are highly desirable features and
will create a more accurate joint in the finished product.
Selection Guide: ROLL-A-MOTORS SINGLE PHASE

MODEL
NO.
TUBE CAPACITY
O.D.
MIN. - MAX.
STEEL
1/4" - 5/8"
6.35 - 15.87 mm
NON-FERROUS
1/4" - 3/4"
6.35 - 19.05 mm
LOADED
SPEED
RPM
VOLTAGE
POWER
INPUT
WATT
POWER
OUTPUT
WATT
SHANK
2 SPEED
430
1050
42 VOLT A.C.
110 VOLT A.C.
230 VOLT A.C.
50-60 HZ.
300
145
B-12
1500
42 VOLT A.C.
110 VOLT A.C.
230 VOLT A.C.
50-60 HZ.
280
150
B-12
800
OR
1100
42 VOLT A.C.
110 VOLT A.C.
230 VOLT A.C.
50-60 HZ.
650
420
B-16
4 SPEED
190
410
500
1080
42 VOLT A.C.
110 VOLT A.C.
230 VOLT A.C.
50-60 HZ.
1100
680
MT-2
4 SPEED
100
170
300
510
42 VOLT A.C.
110 VOLT A.C.
230 VOLT A.C.
50-60 HZ.
1700
1000
MT-3
400
STEEL
1/4" - 1/2"
6.35 - 12.7 mm
NON-FERROUS
1/4" - 5/8"
6.35 - 15.87 mm
500
STEEL
1/2" - 7/8"
12.7 - 22.22 mm
NON-FERROUS
5/8" - 1"
15.87 - 25.4 mm
875
STEEL
1/2" - 2"
12.7 - 50.8 mm
NON-FERROUS
3/4" - 2 1/2"
19.05 - 63.5 mm
1000
STEEL
3/4" - 2 1/2"
19.05 - 63.5 mm
NON-FERROUS
3/4" - 3"
19.05 - 76.2 mm
28
1200
Note: Other quick change chuck available see page 32.

ROLL-A-MOTORS SINGLE PHASE
TELESCOPIC UNIVERSAL SHAFT
WEIGHT SUPPLIED WITH

QUICK CHANGE
CHUCK
3.3 lbs
1.5 kg
3.5 lbs
1.6 kg
1/4" OR 3/8"
MODEL
NO.
SHANK
EXTENSIBILITY
WEIGHT
SUPPLIED WITH
QUICK CHANGE
CHUCK
TUS-2
MT-2
M29X1.5
1005/1505 mm
25.3 lbs
11.5 kg
3/8" AND 1/2"
TUS-3
MT-3
M35X1.5
1005/1505 mm
25.3 lbs
11.5 kg
3/8" AND 1/2"
1/4" OR 3/8"
ROLL-A-MOTOR SUPPORT
8.1 lbs
3.7 kg
3/8" OR 1/2"
ROLL-A-MOTORS SUITABLE FOR TELESCOPIC UNIVERSAL SHAFT

MODEL
NO.
16.5 lbs
7.5 kg
3/8" AND 1/2"
18 lbs
8.3 kg
3/8" AND 1/2"
SHANK
ROLL-A-MOTOR
SUPPORT
TELESCOPIC
SHAFT
SUPPLIED WITH
QUICK CHANGE
CHUCK
1000-TS
MT-2
M29X1.5
RMS-1
TUS-2
3/8" AND 1/2"
1200-TS
MT-3
M35X1.5
RMS-1
TUS-3
3/8" AND 1/2"
29

ROLL-A-MOTORS THREE PHASE
The TECO 'Roll-A-Motor' is ruggedly designed for low
and high torque capabilities.
Smooth running, frequent forward and reverse
operations together with a controlled output of the
amount of expansion are highly desirable features and
will create a more accurate joint in the finished product.
Selection Guide: ROLL-A-MOTORS THREE PHASE

MODEL
NO.
TUBE CAPACITY
O.D.
MIN. - MAX.
STEEL
1/4" - 1/2"
6.35 - 12.7 mm
NON-FERROUS
1/4" - 5/8"
6.35 - 15.87 mm
LOADED
SPEED
RPM
VOLTAGE
900
OR
1400
POWER
INPUT
WATT
POWER
OUTPUT
WATT
SHANK
42 VOLT 3 PH.
220 VOLT 3 PH.
400 VOLT 3 PH.
50-60 HZ.
425
225
B12
3 SPEED
100
250
800
42 VOLT 3 PH.
220 VOLT 3 PH.
400 VOLT 3 PH.
50-60 HZ
800
500
MT-2
M30X1.5
4 SPEED
120
195
360
680
42 VOLT 3 PH.
220 VOLT 3 PH.
400 VOLT 3 PH.
50-60 HZ.
1250
800
MT-3
M35X1.5
5 SPEED
120
195
360
680
1450
42 VOLT 3 PH.
220 VOLT 3 PH.
400 VOLT 3 PH.
50-60 HZ.
1250
800
MT-3
M35X1.5
5 SPEED
20
40
80
160
700
42 VOLT 3 PH.
220 VOLT 3 PH.
400 VOLT 3 PH.
50-60 HZ.
1500
900
MT-4
M50X2
TC-1
STEEL
1/2" - 1 1/2"
12.7 - 38.1 mm
NON-FERROUS
5/8" - 2"
15.87 - 50.8 mm
TC-3
STEEL
3/4" - 2"
19.05 - 50.8 mm
NON-FERROUS
3/4" - 2 1/2"
19.05 - 63.5 mm
TC-4
STEEL
3/4" - 2"
19.05 - 50.8 mm
NON-FERROUS
5/8" - 2 1/2"
15.87 - 63.5 mm
TC-4/1
STEEL
1" - 3"
25.4 - 76.2 mm
NON-FERROUS
1 1/4" - 4"
31.75 -101.6 mm
30
TC-5

ROLL-A-MOTORS THREE PHASE
ROLL-A-MOTOR SUPPORT
WEIGHT SUPPLIED WITH

QUICK CHANGE
CHUCK
TELESCOPIC UNIVERSAL SHAFT

7 lbs
3.2 kg
1/4" OR 3/8"
MODEL
NO.
SHANK
EXTENSIBILITY
WEIGHT
ROLL-A-MOTOR
SUPPORT
21 lbs
9.5 kg
3/8" AND 1/2"
TUS-2-A
MT-2
M30X1.5
1005/1505 mm
25.3 lbs
11.5 kg
RMS-2
29.5 lbs
13.5 kg
3/8" AND 1/2"
TUS-3
MT-3
M35X1.5
1005/1505 mm
25.3 lbs
11.5 kg
RMS-3
29.5 lbs
13.5 kg
3/8" AND 1/2"
TUS-3
MT-3
M35X1.5
1005/1505 mm
25.3 lbs
11.5 kg
RMS-3
46.0 lbs
20.9 kg
1/2" QUICK
CHANGE CHUCK
AND
3/4" FIXED CHUCK
TUS-4
MT-4
M50X2
1005/1505 mm
25.3 lbs
11.5 kg
RMS-3
31

ROLL-A-MOTOR
COUPLINGS
ROLL-A-MOTOR
UNIVERSAL JOINTS
Selection Guide:
Selection Guide:
Motor Coupling with Quick Change Chuck
Universal Joint with Quick Change Chuck
Model
Suitable for Roll-A-Motor
MT-2 x 3/8" I.D. Sq.

MT-2 x 1/2" I.D. Sq.
MT-3 x 3/8" I.D. Sq.
MT-3 x 1/2" I.D. Sq.
MT-4 x 3/8" I.D. Sq.
MT-4 x 1/2" I.D. Sq.
model 1000 & TC-3

model 1000 & TC-3
model 1200 & TC-4 & TC-4/1
model 1200 & TC-4 & TC-4/1
model TC-5
model TC-5
Model
Overall Length
3/8" O.D. Sq. x 3/8" I.D. sq.

MT-2 or MT-3 x 3/8" I.D. sq.
1/2" O.D. Sq. x 1/2" I.D. sq.
MT-2 or MT-3 x 1/2" I.D. sq.
4" Long
4" Long
4" Long
4" Long
Universal Joint Fixed Model

Model
Overall Length
3/4" O.D. Sq. x 3/4" I.D. Sq.

1" O.D. Sq. x 1" I.D. Sq.
8" or 12" Long

8" or 12" Long
Double Universal Joint with Quick Change Chuck

both sides with quick change chuck
Model
B12 x 1/4" I.D. Sq.

B12 x 3/8" I.D. Sq.
B16 x 3/8" I.D. Sq.
B16 x 1/2" I.D. Sq.
model 400 & 500 & TC-1

model 400 & 500 & TC-1
model 875
model 875
3/8" I.D. Sq. x 3/8" I.D. Sq.

1/2" I.D. Sq. x 1/2" I.D. Sq.
Motor Coupling Fixed Model

Double Universal Joint (with fixed chuck)
3/4" Internal square x 3/4" Internal Square
1" Internal square x 1" Internal Square
Mandrel Extensions
Model
MT-2 x 3/4" I.D. Sq.

MT-3 x 3/4" I.D. Sq.
MT-4 x 3/4" I.D. Sq.
model 1000 & TC-3

model 1200 & TC-4 & TC-4/1
model TC-5
Model
Overall Length
MT-2 x 1" I.D. Sq.

MT-3 x 1" I.D. Sq.
MT-4 x 1" I.D. Sq.
model 1000 & TC-3

model 1200 & TC-4 & TC-4/1
model TC-5
3/8" O.D. Sq. x 3/8" I.D. Sq.

Quick Change Chuck
1/2" O.D. Sq. x 1/2" I.D. Sq.
Quick Change Chuck
8" or 12" Long
3/4" O.D. Sq. x 3/4"

Internal Square
1" O.D. Sq. x 1"
Internal Square
8" or 12" Long
Model
Overall Length
3/8" O.D. Sq. x 3/8" O.D. Sq.

1/2" O.D. Sq. x 1/2" O.D. Sq.
8" or 12" Long

8" or 12" Long
Motor Coupling Fixed Model
32
3/4" I.D. Sq. x 3/4" I.D. Sq.

1" I.D. Sq. x 1" I.D. Sq.
8" or 12" Long
8" or 12" Long

TUBE INSTALLATION TOOLS
FLARING AND BELLING TOOL
Special tool for flaring tube ends.
Available for tubes from 1/2" to 1 1/2"
(12.7 mm to 38.1 mm) O.D.
Description
Model no.
Prefix
Model size
1/2" 5/8" 3/4" 7/8"
1"
Tube
Gauge
Shank
Flaring tool
TFT
500
625
750
875
1000
Specify
Gauge
No. 01
Belling tool
TBT
500
625
750
875
1000
Specify
Gauge
No. 01
Standard shank is no. 01, other shank types on request
TUBE GUIDE
Ideal for piloting tubes through tube sheet baffles, and
support plates.
Available for tubes from 3/8" to 2" (9.5 mm to 50.8 mm)
O.D.
In Aluminium, Steel and Stainless Steel with fitted

replaceable nylon or Stainless Steel brush.
Tube O.D.
Larger sizes on request
COMBINED TUBE-END MILL AND

FACER
This tool is adjustable according to diameter and gauge
of the tube. Used for simultaneous end milling and
bevelling of I.D. and O.D. of tube.
Model No.
Tube O.D.
Tube I.D.
Shank
diameter
TMF-01
.237"-.473"
6.0-12.0 mm
.079"-.213"
2.0-5.4 mm
.492"
12.5 mm
Inch
mm
Gauge
Model no.
3/8"
9.5 mm
18-20
TTG- 0
TMF-02
.276"-.552"
7.0-14.0 mm
.102"-.307"
2.6-7.8 mm
.492"
12.5 mm
1/2"
12.7 mm
16-18
19-20
TTG- 1
TTG- 2
TMF-03
.355"-.788"
9.0-20.0 mm
.142"-.504"
3.6-12.8 mm
.630"
16 mm
TMF-04
.630"-1.063"
16.0-27.0 mm
.181"-.945"
4.6-24.0 mm
.630"
16 mm
TMF-05
.984"-1.732"
25.0-44.0 mm
.788"-1.535"
20.0-39.0 mm
MT-2
TMF-06
1.614"-2.363"
41.0-60.0 mm
1.417"-2.165"
36.0-55.0 mm
MT-2
TMF-07
2.244"-3.000"
57.0-76.0 mm
2.047"-2.795"
52.0-71.0 mm
MT-2
TMF-08
2.875"-3.625"
73.0-92.0 mm
2.677"-3.425"
68.0-87.0 mm
MT-2
5/8"
15.8 mm
12-13
14-16
17-20
TTG- 3
TTG- 4
TTG- 5
3/4"
19.05 mm
10-12
13-16
17-20
TTG- 6
TTG- 7
TTG- 8
22.2 mm
10-12
13-16
17-20
TTG- 9
TTG-10
TTG-11
10-12
13-16
17-20
TTG-12
TTG-13
TTG-14
7/8"
1"
25.4 mm
Minimum order quantity 10 pcs.
33

TUBE INSTALLATION TOOLS
GROOVING TOOL
A fast and accurate tool for cutting grooves in the tube
sheets to lock rolled tubes firmly into position.
May be used with 300/400 rpm pneumatic or electric
motor.
There are two replaceable tool bits and the tool has
ample reach from 0" to 1 1/2" (0 to 38.10 mm). Available
with morse taper shank No. 2, No. 3 or No. 4, for tube
sheet holes 5/8" to 1" (15.8 mm to 25.4 mm).
Model no.
Tubesheet
I.D.
Depth
Groove
Spacing
Groove
width
Shank
TGT- 625
5/8" (15.8 mm)
TGT- 750
3/4" (19.05 mm)
0"
to
1 1/2"
1/4"
or
3/8"
1/8"
TGT- 875
7/8" (22.22 mm)
TGT-1000
1" (25.40 mm)
0 mm
to
38.1 mm
6.3 mm
or
9.4 mm
MT-2
or
MT-3
3 mm
TUBE-END FACERS
For facing ends of tubes in heat exchangers and
condensers.
It has one replaceable tool bit and a set of rotating pilot
bushes. Fitted with an adjustable thrust collar the unit
incorporates a depth gauge which accurately controls the
amount of tube projection.
An important safety feature is the left-hand threaded
adjustment of this part to prevent accidental self feeding
of the cutter.
Available for tubes from 5/8" to 1 1/4" (15.8 mm to 31.75
mm) O.D.
34
Tube O.D.
and Gauge
Model No. Cutter

Body
Cutter
Bit
Carbon
Steel
Cutter
Collar
Bit
Housing
Non Ferrous
S. Steel
Thrust
Nut
Bearing Pilot Rolls

(set)
Shank
Hexagon
1/2" O.D.-12-20 G.A.
NTEF- 500
11710500
11720500
11730500
11760500
11770500 1201101 GR- 500-12-20 7/16" (11.1mm)
5/8" O.D.-11-19 G.A.
NTEF- 625
11710625
11720625
11730625
11760625
11770625 1201103 GR- 625-11-19 7/16" (11.1mm)
3/4" O.D.-10-19 G.A.
NTEF- 750
11710750
11720750
11730750
11760750
11770625 1201103 GR- 750-10-19 7/16" (11.1mm)
7/8" O.D.- 8-24 G.A.
NTEF- 875
11710750
11720750
11730750
11760750
11770625 1201103 GR- 875- 8-24
1" O.D.- 8-19 G.A.
NTEF-1000 11711000
11721000
11731000
11761000
11770750 1201104 GR-1000- 8-19 7/16" (11.1mm)
1 1/8" O.D.- 8-19 G.A. NTEF-1125 11711000
11721000
11731000
11761000
11770750 1201104 GR-1125- 8-19 7/16" (11.1mm)
1 1/4" O.D.- 8-19 G.A. NTEF-1250 11711250
11721250
11731250
11761250
11770750 1201104 GR-1250- 8-19 7/16" (11.1mm)
7/16" (11.1mm)

TUBE REMOVAL TOOLS
ONE REVOLUTION TUBE CUTTER NEW MODEL
Suitable for cutting steel and non-ferrous tubes in condensers, heat exchangers and boilers.
Adjustable for tube sheet thickness from 2" to 6" (50.8
mm to 152.4 mm).
Available for tubes from 1/2" to 2 1/2" (12.7 to 63.3 mm)
O.D..
The TECO one revolution tube cutter is designed for hand
operation using a ratchet or hand wrench of proper size
to fit the drive shank of the tool. The cutter bit operates
Tube O.D.
10 Gauge
on an eccentric principle. With the cutter bit in the closed

position insert the cutter into the tube to be cut. Apply
wrench and turn in a clockwise direction. The tool bit will
move out and pierce the tube wall. Continued turning
and cut the tube off in one revolution. The cutter is then
turned counterclockwise slightly to close in the bit allowing the cutter to be removed from the tube.
The TECO one revolution tube cutter can also be used to
puncture the tube before plugging. This ensures that
pressure cannot build up in the tube and cause the plug
to become loose or blow out.
11 Gauge
12 Gauge
13 Gauge
14 Gauge
15 Gauge
16 and 17 Gauge
TCOR- 625-12
TCOR- 625-13
TCOR- 625-14
TCOR- 625-15
TCOR- 625-16
1/2"
(12.70 mm)
5/8"
(15.87 mm)
TCOR- 625-10
TCOR- 625-11
3/4"
(19.05 mm)
TCOR- 750-10
TCOR- 750-11
18 and 19 Gauge
TCOR- 500-18
TCOR- 625-18
Cutter Bit
CB- 625N
CB- 625N
CB- 750- 7-11N
3/4"
(19.05 mm)
7/8"
(22.22 mm)
TCOR- 875-10
TCOR- 875-11
TCOR- 750-12
TCOR- 750-13
TCOR- 750-14
TCOR- 750-15
TCOR- 750-16
TCOR- 750-18
TCOR- 875-12
TCOR- 875-13
TCOR- 875-14
TCOR- 875-15
TCOR- 875-16
TCOR- 875-18
CB- 750-12-19N
1"
(25.40 mm)
TCOR-1000-10
TCOR-1000-11
1"
(25.40 mm)
TCOR-1000-12
TCOR-1000-13
TCOR-1000-14
TCOR-1000-15
TCOR-1000-16
TCOR-1000-18
CB-1000-12-19N
1 1/4" (31.75 mm)
TCOR-1250-10
TCOR-1250-11
TCOR-1250-12
TCOR-1250-13
TCOR-1250-14
TCOR-1250-15
TCOR-1250-16
TCOR-1250-18
CB-1000-12-19N
1 1/2" (38.10 mm)
TCOR-1500-10
TCOR-1500-11
TCOR-1500-12
TCOR-1500-13
TCOR-1500-14
TCOR-1500-15
TCOR-1500-16
TCOR-1500-18
CB-1500-10-19N
1 3/4" (44.45 mm)
TCOR-1750-10
TCOR-1750-11
TCOR-1750-12
TCOR-1750-13
TCOR-1750-14
TCOR-1750-15
TCOR-1750-16
TCOR-1750-18
CB-1500-10-19N
2"
(50.80 mm)
TCOR-2000-10
TCOR-2000-11
TCOR-2000-12
TCOR-2000-13
TCOR-2000-14
TCOR-2000-15
TCOR-2000-16
TCOR-2000-18
CB-1500-10-19N
2 1/4" (57.15 mm)
TCOR-2250-10
TCOR-2250-11
TCOR-2250-12
TCOR-2250-13
TCOR-2250-14
TCOR-2250-15
TCOR-2250-16
TCOR-2250-18
CB-2250-10-19N
2 1/2" (63.50 mm)
TCOR-2500-10
TCOR-2500-11
TCOR-2500-12
TCOR-2500-13
TCOR-2500-14
TCOR-2500-15
TCOR-2500-16
TCOR-2500-18
CB-2250-10-19N
CB-1000- 7-11N
CB-1000- 7-11N
TWO PIECE TUBE PLUGS
TAPERED TUBE PLUGS
For sealing off leaky condenser and heat exchanger

tubes without damaging tube sheets.
Tapered pin is driven into ring, which is tapered
on the inside and is parallel to tube on the outside.
This gives even expansion to the ring and a
long contact to the seal.
Ideal for sealing leaky tubes in condensers or heat

exchangers.
Just drive a plug into each end of leaky tube.
Available in a variety of metals.
Specify Tube O.D. and Gauge.
Available in a variety of metals.

Specify Tube O.D. and Gauge.
Note: puncture the tube to ensure that pressure cannot build up in the tube and cause the plugs to loosen or blowout.
35

TUBE REMOVAL TOOLS
TECO PTC
INTERNAL TUBE CUTTERS
Are available for tube sizes 5/8" 1 1/8" OD (16 28 mm).
Standard adjustable reach of 4 7/16" (110 mm) with
optional longer reaches available.
Two piece body and mandrel construction allow for quick

and easy tool bit replacement. Optimum tube cutting performance and tooling life are obtained when employed
by the TECO Cutter Feed Assist. Cutter Bits are now standard with Tin coating, increasing the cutter bit life. TECO
PTC tube cutters are sold with a complete set of pilots.
"A" Reach = 7 7/16" (188 mm),

"C" Reach = 10 15/16" (277 mm).
1B
1A
1C
10
11
12
13
14
PART LIST TUBE CUTTER TYPE PTC

5/8'' OD (16mm)
16-21 GA.
3/4OD (19 mm)

14-22 GA.
7/8OD (22 mm)

16-22 GA.
1''OD (25 mm)

12-22 GA.
1 1/8OD (28 mm)

12-22 GA.
Part Name
Part No.
Part No.
Part No.
Part No.
Part No.
Complete PTC Cutter
PTC-625
17000625
PTC-750
17000750
PTC-875
17000875
PTC-1000
17001000
PTC-1125
17001125
11490616
11490617
11490618
11490619
11490620
11490621
11490714
11490715
11490716
11490717
11490718
11490719
11490720
11490721
11490816
11490817
11490818
11490819
11490820
11490822
1.A Pilot Body

2.
Body Tip
Tool Bit (Non ferrous)
3.
Tool Bit (Ferrous)
Tool Bit (Stainless)
4.
Mandrel Tip.
5.
Body Extension.
6.
Mandrel Extension.
7.
Thrust Body.
8.
Bearing.
9.
Thrust Spring.
10. Set Screw.
11. Thrust Nut.
12. Spring Housing.
13. Spring
14. Driver.
17100625
17200625
PTC-43
PTC-43-S
PTC-43-SS
17400625
17500625
17600625
17700625
1201102
J-28-V.
M5x5
17110625
17120625
PTC-625-13
17140625
17100750
17200750
PTC-3
PTC-3-S
PTC-3-SS
17400750
17500750
17600625
17700750
1201102
J-28-V
M5x5
17110750
17120625
PTC-625-13
17140625
17100875
17200875
PTC-53
PTC-53-S
PTC-53-SS
17400875
17500875
17600875
17700875
1201104
J-35 V
M5x5
17110875
17120625
PTC-625-13
17140625
11491012
11491013
11491014
11491015
11491016
11491017
11491018
11491019
11491020
11491022
17101000
17201000
PTC-33
PTC-33-S
PTC-33-SS
17400875
17501000
17600875
17701000
1201104
J-35-V
M5x5
17111000
17120625
PTC-625-13
17140625
11491112
11491113
11491114
11491115
11491116
11491117
11491118
11491119
11491120
11491122
17101125
17201125
PTC-33
PTC-33-S
PTC-33-SS
17401125
17501125
17600875
17701125
1201105
J-42-V
M5x5
17111125
17120625
PTC-625-13
17140625
15.
16.
17.
17150625
17160625
17170625
17150750
17160750
17170750
17150875
17160875
17170875
17151000
17161000
17171000
17151125
17161125
17171125
NO.
1.B Pilot
36
Trim Thrust Body

Trim Collar.
Trim Attachment.

TUBE REMOVAL TOOLS
TUBE DRIFT
For removing tube stubs from the tube sheets.
Available for tubes from

1/2" to 1 1/2" O.D.
(12.7 mm to 38.1 mm) O.D.
Description
Model no.
Prefix
Tube drift
TTD
Model size
1/2" 5/8" 3/4" 7/8"
500
625
750
875
1"
1000
Tube
Gauge
Shank
Specify
Gauge
No.01
TUBE WALL REDUCING TOOL

For reducing the tube wall in condensers and heat
exchangers to facilitate collapsing.
Available for tube

1/2" to 1 1/2" O.D.
(12.7 mm to 38.1 mm) O.D.
Description
Model no.
Prefix
Tube wall reducing tool
TRT
Model size
1/2" 5/8" 3/4" 7/8"
500
625
750
875
1"
1000
Tube
Gauge
Shank
Specify MT-2 or MT-3

Gauge
COLLAPSING TOOL
Designed for collapsing the tube in the tube sheet after
the tube wall is reduced with the tube wall reducing tool.
Suitable for tubes

from 1/2" to 1 1/2" O.D.
(12.7 mm to 38.1 mm) O.D.
Description
Collapsing tool
Model no.
Prefix
TCT
Model size
1/2" 5/8" 3/4" 7/8"
500
625
750
875
Shank
1"
1000
No.01
37

TUBE REMOVAL TOOLS
MANUAL TUBE PULLER
FEATURES
This newly designed tool is used for extracting

tubes from the tube sheet holes without damaging the
tube sheet holes.
Available for tubes from 1/2" to 1 1/2" (12.7 mm to 38.1
mm) O.D.
Easy to use
No external power necessary
Can be used with an impact wrench in combination
with drive socket 1 .
Tube Size
O.D. and GA
Model
no.
Spear 4
no.
Diameter
small end
Diameter
large end
Square
on spear
Collar 3
no.
Nut 2
Hex 1 5/16"
Socket 1
Hex 1 5/16"
Square 5/8"
1/2"-14-20
MTP-1/2"-14-20
MTPS-1/2"-14-20
.315"
8 mm
.472"
12 mm
5/8"
MPC-1/2"
MPN
MPS
5/8"-11-14
MTP-5/8"-11-14
MTPS-5/8"-11-14
.354"
9 mm
.512"
13 mm
5/8"
MPC-5/8"
MPN
MPS
5/8"-14-20
MTP-5/8"-14-20
MTPS-5/8"-14-20
.453"
11,5 mm
.610"
15,5 mm
5/8"
MPC-5/8"
MPN
MPS
3/4"-10-13
MTP-3/4"-10-13
MTPS-5/8"-14-20
.453"
11.5 mm
.610"
15.5 mm
5/8"
MPC-3/4"
MPN
MPS
3/4"-14-20
MTP-3/4"-14-20
MTPS-3/4"-14-20
.571"
14.5 mm
.728"
18.5 mm
5/8"
MPC-3/4"
MPN
MPS
7/8"-14-19
MTP-7/8"-14-19
MTPS-7/8"-14-19
.689"
17,5 mm
.846"
21,5 mm
5/8"
MPC-7/8"
MPN
MPS
1"- 9-13
MTP-1"-9-13
MTPS-7/8"-14-19
.689"
17,5 mm
.846"
21,5 mm
5/8"
MPC-1"
MPN
MPS
1"-14-20
MTP-1"-14-20
MTPS-1"-14-20
.823"
20,9 mm
.980"
24,9 mm
5/8"
MPC-1"
MPN
MPS
1"-17-24
MTP-1"-17-24
MTPS-1"-17-24
.866"
22 mm
1.024"
26 mm
5/8"
MPC-1"
MPN
MPS
1 1/8"-11-15
MTP-1 1/8"-11-15
MTPS-1"-17-24
.866"
22 mm
1.024"
26 mm
5/8"
MPC-1 1/8"
MPN
MPS
1 1/8"-15-23
MTP-1 1/8"-15-23
MTPS-1 1/8"-15-23
.965"
24,5 mm
1.122"
28,5 mm
5/8"
MPC-1 1/8"
MPN
MPS
1 1/4"-10-13
MTP-1 1/4"-10-13
MTPS-1 1/8"-15-23
.965"
24,5 mm
1.122"
28,5 mm
5/8"
MPC-1 1/4"
MPN
MPS
1 1/4"-14-19
MTP-1 1/4"-14-19
MTPS-1 1/4"-14-19
1.063"
27 mm
1.220"
31 mm
5/8"
MPC-1 1/4"
MPN
MPS
1 1/2"-12-17
MTP-1 1/2"-12-17
MTPS-1 1/2"-12-17
1.268"
32.2 mm
1.425"
36.2 mm
5/8"
MPC-1 1/2"
MPN
MPS
38

TUBE PULLING SYSTEMS
UNIVERSAL HYDRAULIC PUMPS
Model no.: TGPER-5420-SP
Model no.: TGPAR-5420-SP
Electro Hydraulic Pump

2.2 kW 220 Volt -3 Ph -50/60 Hz.
2.2 kW 400 Volt -3 Ph -50/60 Hz.
Two-Stage pump flow capacity:
8.74 I/min. at 0- 60 bar.
1.64 I/min. at 60-700 bar.
Oil tank capacity: 20 litre.
Electric Solenoid 4/3-way valve: 24 Volt A.C.
Remote control: Hand or Foot switch (optional).
Frame size: L 70 cm x W 54 cm x H 83 cm
L 28" x W 22" x H 33",
provided with ball bearing type swivel wheels
and brakes.
Glycerine filled pressure gauge scale 0-700 bar.
Complete with set of hydraulic hoses, 6 metres
(20 feet) long, with High-Flow quick couplings.
Weight complete: 95 kg (210 Ibs).
Other models and power supplies are available on request.
Air-Driven Hydraulic Pump 2.2 kWAir-motor

Air consumption: 2400 I/min.
Air pressure: 6 bar (84 Psi).
Two-Stage pump flow capacity:
10.8 I/min. at 0- 60 bar.
1.3 I/min. at 60-700 bar.
Oil tank capacity: 20 litre.
Pneumatic operated 4/3-way valve.
Remote control: Foot switch.
Frame size: L 70 cm x W 54 cm x H 83 cm
L 28" x W 22" x H 33",
provided with ball bearing type swivel wheelsand
brakes.
Complete with set of hydraulic hoses, 6 metres
(20 feet) long, with High-Flow quick couplings.
Weight complete: 75 kg (165 Ibs).
39

HYDRAULIC OPERATED GRIPPER TYPE TUBE PULLER
FOR CONDENSER TUBES
VERY FAST - EASY TO USE - LIGHT TOOL (Patented)
When re-tubing condenser and other similar types of unit
containing non-ferrous tubes this specially developed
Hydraulic Gripper Tube Puller removes tubes or tube
stubs without damaging the tube sheet holes.
This unit can pull up to 4 to 6 tubes per minute.
The hydraulic ram has a single cycle stroke of 6 inch and
a pulling power of 7 or 11 tons.
The hydraulic pump operates at a pressure of 700 Bar
and has High-Flow quick couplings.
THE HYDRAULIC
GRIPPER TUBE PULLER
CONSISTS OF
Gripper tube puller unit (Patented)
containing: 1. Stop nut
2. Replaceable Gripper shells
3. Bushing
4. Puller mandrel
Hydraulic Ram either: 7 or 11 tons pulling power with
collar.
Hydraulic Pump (electric or pneumatic) see page 40.
Hand or Foot-switch, pump will only run when switch
is operated.
Connection hose with High-Flow quick couplings.
40
Tube Size
Model No.
Grippers set 2
Puller Mandrel 4
Stop-Nut 1
Bushing 3
5/8" O.D.-16-18 Gauge

16 mm O.D. to 12.70-13.50 mm I.D.
CTP -625-16-18
GCTP -625-16-18
MCTP -625-16-18
SCTP-3/8"-24
BCTP-7/16"-20
5/8" O.D.-19-22 Gauge

16 mm O.D. to 13.90-14.60 mm I.D.
CTP -625-19-22
GCTP -625-19-22
MCTP -625-19-22
SCTP-3/8"-24
BCTP-7/16"-20
3/4" O.D.-16-18 Gauge

CTP -750-16-18
19.05 mm O.D. to 15.75-16.60 mm I.D.
GCTP -750-16-18
MCTP -750-16-18
SCTP-7/16"-20
BCTP-7/16"-20
3/4" O.D.-19-22 Gauge

CTP -750-19-22
19.05 mm O.D. to 16.90-17.65 mm I.D.
GCTP -750-19-22
MCTP -750-19-22
SCTP-7/16"-20
BCTP-1/2"-20
7/8" O.D.-16-18 Gauge

CTP -875-16-18
22.20 mm O.D. to 18.90-19.70 mm I.D.
GCTP -875-16-18
MCTP -875-16-18
SCTP-1/2"-20
BCTP-1/2"-20
7/8" O.D.-19-22 Gauge

CTP -875-19-22
22.20 mm O.D. to 20.10-20.80 mm I.D.
GCTP -875-19-22
MCTP -875-19-22
SCTP-1/2"-20
BCTP-1/2"-20
1" O.D.-16-18 Gauge

CTP-1000-16-18
25.40 mm O.D. to 22.00-22.90 mm I.D.
GCTP-1000-16-18
MCTP-1000-16-18
SCTP-1/2"-20
BCTP-1/2"-20
1" O.D.-19-22 Gauge

CTP-1000-19-22
25.40 mm O.D. to 23.30-24.00 mm I.D.
GCTP-1000-19-22
MCTP-1000-19-22
SCTP-1/2"-20
BCTP-1/2"-20
1 1/8" O.D.-16-18 Gauge

CTP-1125-16-18
28.50 mm O.D. to 25.20-26.00 mm I.D.
GCTP-1125-16-18
MCTP-1125-16-18
SCTP-1/2"-20
BCTP-1/2"-20
1 1/8" O.D.-19-22 Gauge

CTP-1125-19-22
28.50 mm O.D. to 26.40-27.10 mm I.D.
GCTP-1125-19-22
MCTP-1125-19-22
SCTP-5/8"-18
BCTP-5/8"-18
1 1/4" O.D.-16-18 Gauge

CTP-1250-16-18
31.75 mm O.D. to 28.45-29.30 mm I.D.
GCTP-1250-16-18
MCTP-1250-16-18
SCTP-5/8"-18
BCTP-5/8"-18
1 1/4" O.D.-19-22 Gauge

CTP-1250-19-22
31.75 mm O.D. to 29.65-30.35 mm I.D.
GCTP-1250-19-22
MCTP-1250-19-22
SCTP-5/8"-18
BCTP-5/8"-18
Larger sizes on request.

HYDRAULIC RAM FOR GRIPPER TYPE TUBE PULLER
Model no.
: RD-96-155-SP-7
Model no.
: BRD-166-155-SP-11
Lightweight Hydraulic Double Acting Ram.
Capacity
: 7 ton pulling power at 700 bar.
Stroke
: 155 mm (6")
Cylinder O.D. : 65 mm (2 1/2")
Length
: 600 mm (23 1/2")
Weight
: 9 kg (20 lbs)
Capacity
Stroke
: 155 mm (6")
Cylinder O.D. : 80 mm (3 1/8")
Length
: 630 mm (25")
Weight
: 13 kg (28 lbs)
COLLAR HOUSING 6
COLLAR TUBING 5
ADAPTER GRIPPER 7
Tube Size
Model No
Ram Model no.
Model No
Ram Model no.
Model No
5/8" O.D.
3/4" O.D.
7/8" O.D.
1" O.D.
1 1/8" O.D.
1 1/4" O.D.
CTTP-625
CTTP-750
CTTP-875
CTTP-1000
CTTP-1125
CTTP-1250
RD-96-155-SP-7
BRD-166-155-SP-11
CHTP-96
CHTP-166
RD-96 & BRD-166

RD-96 & BRD-166
RD-96 & BRD-166
ACTP-7/16-20
ACTP-1/2-20
ACTP-5/8-20
41

HYDRAULIC OPERATED SPEAR TYPE TUBE PULLER FOR
CONDENSER TUBES
The hydraulic spear model tube puller is used to remove
tubes from heat exchangers before re-tubing without
damaging the tube sheet holes.
The spear is screwed into the relevant tube by means of
an impact wrench or slow running nutrunner motor.
The hydraulic cylinder with collar and quick action chuck
is placed over the puller mandrel. The jaws are then
closed around the thread on the puller mandrel by
manual operation.
The tube is now ready to be removed by actuating the
hydraulic ram.
SPEAR TYPE TUBE PULLER
Tube Size
O.D. and GA
Model
Spear no. 1
Collar
4
no.
Diameter
small end
Diameter
large end
Square
Thread on rear
end of spear
Jaw
no. 3
1/2"-12-20
HTP-1/2"-12-20
HPC-1/2"
.276"
7 mm
.472"
12 mm
5/8"
M19x2
M19x2
5/8"-10-16
HTP-5/8"-10-16
HPC-5/8"
.354"
9 mm
.551"
14 mm
5/8"
M19x2
M19x2
5/8"-13-24
HTP-5/8"-13-24
HPC-5/8"
.433"
11 mm
.630"
16 mm
5/8"
M19x2
M19x2
3/4"-12-18
HTP-3/4"-12-18
HPC-3/4"
.531"
13.5 mm
.728"
18.5 mm
5/8"
M19x2
M19x2
7/8"-11-18
HTP-7/8"-11-18
HPC-7/8"
.630"
16 mm
.827"
21 mm
3/4"
M25x2
M25x2
1"- 8-11
HTP-7/8"-11-18
HPC-1"
.630"
16 mm
.827"
21 mm
3/4"
M25x2
M25x2
1"-11-18
HTP-1"-11-18
HPC-1"
.748"
19 mm
.945"
24 mm
3/4"
M25x2
M25x2
1 1/8"- 8-11
HTP-1"-11-18
HPC-1 1/8"
.748"
19 mm
.945"
24 mm
3/4"
M25x2
M25x2
1 1/8"-12-18
HTP-1 1/8"-12-18
HPC-1 1/8"
.906"
23 mm
1.102"
28 mm
3/4"
M25x2
M25x2
1 1/4"- 8-12
HTP-1 1/8"-12-18
HPC-1 1/4"
.906"
23 mm
1.102"
28 mm
3/4"
M25x2
M25x2
1 1/4"-12-18
HTP-1 1/4"-12-18
HPC-1 1/4"
1.024"
26 mm
1.220"
31 mm
3/4"
M25x2
M25x2
1 1/2"- 9-13
HTP-1 1/2"- 9-13
HPC-1 1/2"
1.200"
30.5 mm
1.398"
35.5 mm
1"
M30x2
M30x2
1.299"
33 mm
1.496"
38 mm
1"
1 1/2"-13-18
HTP-1 1/2"-13-18
42
HPC-1 1/2"
M30x2
M30x2
Adapter
3/4 x 5/8
or
1 x 5/8
3/4 x 3/4
or
1 x 3/4
1 x 3/4
1 x 1
or
11/2 x 1

HYDRAULIC RAM FOR SPEAR TYPE TUBE PULLER
Model no.
: RRH-306-155-SP-30

Capacity
Stroke
Cylinder O.D.
Length
Weight
ADAPTER
JAW

: 155 mm (6")
: 120 mm (4 3/8")
: 440 mm (17 3/8")
: 25 kg (55 lbs)
COLLAR
43

AUTOMATIC & CONTINUOUS TUBE PULLING
TECO has introduced the most efficient range of
continuous tube pullers.
This semi or fully automatic TUBE PULLER will run tubes
out of heat exchangers and condensers without the need
to cut the tube prior to pulling.
FEATURES
Continuous pull capacity up to 3" O.D.
Easy to set up and use
High power and high speed automatic cycling
Proven mandrel and pulling jaw system
Electric or pneumatic versions available
'Slow-start' to minimise the risk of tube breakage
Standard electric, hydraulic and pneumatic
components
24 volt operator controls for added safety
44
Interchangeable pulling guns

Complete catalogue available on request.
15 Ton Gun
For light duty, high speed work on tubes of diameter 3/8"
to 1" O.D. e.g. condenser work.
Free pulling speed : 4.5 m/min. (15 ft/min.)
30 Ton Gun
For all tube sizes from 3/8" to 1 1/2" O.D. continuously
through the gun and to 3" O.D. stub pulling.
Free pulling speed : 3 m/min. (10 ft/min.)
45 Ton Gun
For all tube sizes up to 3" O.D. continuously through the
gun and stub pulling applications on boilers and steam
drums.

AUTOMATIC & CONTINUOUS TUBE PULLING
Secure Extractor Mandrel using impact wrench
EXTRACTOR
MANDREL
AS SIMPLE AS A B C
No Need for tube
cutting, thinning or
collapsing.
Pulls both front and
back expansion in
one simple action.
SUPPORTING
HOIST
OR
BALANCER
Gun loaded onto mandrel ready for initial
Slow Start pulling action, under manual
push button control
Auto cycling started by pushing

Auto Cycling button
Gun Auto Cycling, continue until tube is free

enough to pull by hand or until tube is fully
extracted.
45

HYDRAULIC PIPE VICE
The air driven foot operated hydraulic pipe vice is used to
remove the tube puller spear from the tube after the tube
extraction process.
Model no.
: THPV-10-65
Complete with power pack, hose, and replaceable jaws.

Tube size capacity : 10 - 65 mm O.D.
3/8" - 2 1/2" O.D.
Clamping power : 10 Ton.
Air consumption : 340 l/min
12 cfm
46
Air pressure range : 2.7 8.3 bar

39 125 psi

TUBE-END BEVELLING MACHINES
FOR 12.5 TO 876 MM (1/2" TO 34 1/2" ) I.D. TUBES
The Portable Pneumatic and Electric Machines are used
for a variety of applications - the removal of weld, the
preparation of tube ends prior to welding and for facing
operations.
Bevelling machines are also used on light or heavy wall
pipes to simultaneously bevel inside and outside and for
facing cuts.
These machines have the semi-automatic capability for
repetitive operations.
Interchangeable shaft sets are available for bevelling
elbows and u-bends.
One standard shaft covers a wide range of jaws sets for
I.D. range of machine.
Model : MINI
(Pneumatic or Electric operated)
Specially designed - No kick-back action.
Suitable for bevelling ferrous and non-ferrous tubes from
19.05 to 42 mm (3/4" to 1 5/8" I.D. ).
Optional from 12.5 mm (1/2" ).
Model : MINI-AUTOMATIC
(Pneumatic operated only)
Specially designed for facing end of tubes in heat
exchangers and condensers.
This machine operates fully automatically
19.05 to 42 mm (3/4" to 1 5/8" I.D.).
47
Larger sizes, other models and complete catalogue available on request.

TUBE-END BEVELLING MACHINES
FOR 12.5 TO 876 MM (1/2" TO 34 1/2") I.D. TUBES
Model : BOILER
28 to 76 mm (1 1/8" to 3" I.D. ).
Model : SUPERBOILER T4 & T5

39 to 203 mm (1 1/2" to 8" I.D. ).
48
Larger sizes, other models and complete catalogue available on request.

HYDRAULIC SYSTEM FOR TACK EXPANDING
GENERAL DESCRIPTION
The new TECO hydraulic manual expanding system is an
easy to operate tool specifically designed for enlarging
tube ends to produce the slight contact required between
the tube O.D. and the tube sheet hole.
PRIOR TO WELDING THE JOINTS.
It can also be used to calibrate tube ends.
It is also used to fix the tube into the tube sheet hole
before normal expansion by means of a conventional
expander.
ADVANTAGE
Centering of the tube in the tube sheet hole.
Minimum stress on the material.
No stressing of the tube surface.
Total circumference expanded in the required area.
Easily changed to another tube size.
Simple operation and adjustment.
THE UNIT CONSITS OF

Electro hydraulic pump trolley mounted:
Power : 400/220 Volt - 3 Ph - 50/60 Hz.
Two-Stage pump flow capacity :
10.6 l/min. at 0- 60 bar.
2.0 l/min. at 60-350 bar.
Oil tank capacity : 7.5 litre.
Electrical Solenoid 4/3-way valve : 24 Volt A.C.
Remote control : hand switch.
Frame size : L 69 cm x W 18 cm x H 68 cm
L 27" x W 7" x H 27",
provided with ball bearing type swivel wheels
and brakes.
Complete with set of hydraulic hoses, 20 feet
(6 metres) long, with High-Flow quick couplings.
Weight complete : 49 kg (107 lbs).
Light weight hydraulic double-acting cylinder:

Capacity
Stroke
Weight
Tools
: 80 KN.
: 50 mm (2")
: 9.5 kg (21 lbs).
: - adjustable housing for expansion range.
- suspension ring.
- locking ring.
- slotted ring with index.
- handle with switch.
- quick change couplings.
Expanding tools available:

Minimum 8 mm (5/16") I.D.
Maximum 100 mm ( 4") I.D.
49

HYDRO EXPANSION UNIT
The TECO Hydro Expansion Unit has been developed for
speedy simple tube expanding in the construction of heat
exchangers, condensers, steam generators, cooling
apparatus, etc.
Tubes are expanded by precisely controlled hydraulic
pressure.
The primary pressure is obtained by using oil and the
secondary pressure by water. It is the water that creates
the pressure for the tube expansion. This equipment can
easily expand large wall thickness tubes without
occurrence of flaking.
FEATURES
Expands in one action tubes with a large wall
thickness.
Expands tubes over a long length.
Eliminates the need for step tube expanding.
No work hardening of the tube as this is not a rolling
type expansion.
Eliminates distortion of the tube sheet, as there is no
extension of the tube during expansion.
Does not therefore stress welded tube ends.
Increased holding strength between tube and tube
sheet.
Tighter tubes in ring grooved tube sheets.
Smooth contour change between expanded and nonexpanded part of the tube.
Eliminates the need to clean down after expanding.
No rotary reaction of the tube to hold.
Reduced operator fatigue.
Hydro Expansion Mandrel

introduced.
50
Water introduced and de-aerated.
Seals expanded.

HYDRO EXPANSION UNIT
PRINCIPLES OF OPERATION
TECHNICAL SPECIFICATION
The TECO Hydro Expansion is the direct application of

high internal hydraulic pressure within a tube in order to
form a tight joint between the tube and tube sheet. This
pressure or expansive force is accurately set, measured,
repeated and controlled. The pressure level can be calculated or determined empirically.
Model
: TECO Hydro Expansion Unit.
Power
: 400 volt 3 Phase 50/60 Hz.,

16 Amp.
Pressure from the control unit is intensified to the desired

high pressure. It is transmitted through a 6 metre (20
feet), small bore, flexible high pressure tube to a lightweight hand held gun. The mandrel, which latches into
the gun, directs the pressure to the inside diameter of the
tube and is held within an accurately prescribed pressure
zone. Pressure is contained within the expanding tube by
a special elastic seal. Pressure is applied over the full
length of the joint in one step. Stress, crevice corrosion,
and metallurgical changes are minimized.
A smooth transition from expanded to unexpanded
areas, along with no change in tube material properties,
reduces strain hardening, tube fatigue and stress induced corrosion cracking. Tube wall thickness and tube
length change minimally. Before contact is made with
the tube sheet a small reduction in tube wall thickness
and length occurs because a constant volume of tube
material is expanded to a larger diameter. However, no
change occurs during the high pressure expanding, eliminating the shear strain and loss of seal between tube
and tube sheet that is a characteristic of roller expanding.
Maximum Low pressure : 200 Bar

Maximum High pressure: 4000 Bar
Oil tank capacity
Water tank capacity
: 40 Litre
: 25 Litre
Flex tube to the handgun: 6 metres (18 feet),

maximum pressure 6000 Bar
Dimensions Control Unit : L 160 cm x W 77 cm x H 137 cm
L 63" x W 30" x H 54"
Weight
: 640 kg (1411 Ibs).
Dimensions Hand Gun
Weight
: L 17 cm x W 21 cm x H 12 cm
L7"xW9"xH5"
: 4 kg ( 9 Ibs).
TECO Hydro Expansion cycle is automatic

and initiated by the operator pedal on the
footswitch. The tube is filled with clean
water at a low pressure. It is then intensified
to the higher pressure and held for the time
required to allow the tube to expand into a
stable condition. This dwell time is essential
for the stability of exotic materials. Finally
the pressure is released and the water drained back into the reservoir. All this takes is
just a few seconds so the cycle time is fast.
Actual pressure of the water causing expansion is readon a digital indicator and can be
printed out if required.
Tube is expanded to touch tube

sheet hole.
Further elastic deformation of the

tube sheet hole.
Pressure is released, elastic deformation will contract and a uniform

seal on the tube is established.
51

TABLES AND FORMULAS
BIRMINGHAM WIRE GAUGE TABLE INCHES
TUBE SIZES
OUTSIDE DIAMETER
B.W.G.
Wall
Thickness
1/4"
3/8"
1/2"
5/8"
3/4"
7/8"
1"
1-1/4"
1-1/2"
1-3/4"
2"
2-1/4"
2-1/2"
2-3/4"
3"
3-1/4"
3-1/2"
3-3/4"
4"
4-1/4"
4-1/2"
00
0.380
0.340
0.300
0.284
0.115
0.240
0.490
0.740
0.990
1.240
1.490
1.740
1.990
2.240
2.490
2.740
2.990
3.240
3.490
3.740
0.070
0.195
0.320
0.570
0.820
1.070
1.320
1.570
1.820
2.070
2.320
2.570
2.820
3.070
3.320
3.570
3.820
0.025
0.150
0.275
0.400
0.650
0.900
1.150
1.400
1.650
1.900
2.150
2.400
2.650
2.900
3.150
3.400
3.650
3.900
0.057
0.182
0.307
0.432
0.682
0.932
1.182
1.432
1.682
1.932
2.182
2.432
2.682
2.932
3.182
3.432
3.682
3.932
10
11
0.180
0.165
0.148
0.134
0.120
0.094
0.219
0.344
0.469
0.594
0.844
1.094
1.344
1.594
1.844
2.094
2.344
2.594
2.844
3.094
3.344
3.594
3.844
4.094
0.140
0.265
0.390
0.515
0.640
0.890
1.140
1.390
1.640
1.890
2.140
2.390
2.640
2.890
3.140
3.390
3.640
3.890
4.140
0.045
0.170
0.295
0.420
0.545
0.670
0.920
1.170
1.420
1.670
1.920
2.170
2.420
2.670
2.920
3.170
3.420
3.670
3.920
4.170
0.079
0.204
0.329
0.454
0.579
0.704
0.954
1.204
1.454
1.704
1.954
2.204
2.454
2.704
2.954
3.204
3.454
3.704
3.954
4.204
0.107
0.232
0.357
0.482
0.607
0.732
0.982
1.232
1.482
1.732
1.982
2.232
2.482
2.732
2.982
3.232
3.482
3.732
3.982
4.232
0.135
0.260
0.385
0.510
0.635
0.760
1.010
1.260
1.510
1.760
2.010
2.260
2.510
2.760
3.010
3.260
3.510
3.760
4.010
4.260
19
20
21
22
23
24
0.035
0.032
0.028
0.025
0.022
0.180
0.305
0.186
0.311
0.194
0.319
0.200
0.325
0.206
0.331
0.430
0.555
0.680
0.805
0.930
1.180
1.430
1.680
1.930
0.436
0.561
0.686
0.811
0.936
1.186
1.436
1.686
1.936
0.444
0.569
0.694
0.819
0.944
1.194
1.444
1.694
1.944
0.450
0.575
0.700
0.825
0.950
1.200
1.450
1.700
1.950
0.456
0.581
0.706
0.831
0.956
1.206
1.456
1.706
1.956
0.259
0.238
0.220
0.203
INSIDE DIAMETER (INCH)
0.107
0.232
0.357
0.482
0.732
0.982
1.232
1.482
1.732
1.982
2.232
2.482
2.732
2.982
3.232
3.482
3.732
3.982
0.024
0.149
0.274
0.399
0.524
0.774
1.024
1.274
1.524
1.774
2.024
2.274
2.524
2.774
3.024
3.274
3.524
3.774
4.024
0.060
0.185
0.310
0.435
0.560
0.810
1.060
1.310
1.560
1.810
2.060
2.310
2.560
2.810
3.060
3.310
3.560
3.810
4.060
BIRMINGHAM WIRE GAUGE TABLE INCHES
OUTSIDE DIAMETER
TUBE SIZES
52
B.W.G.
Wall
Thickness
12
13
14
15
16
17
0.109
0.095
0.083
0.072
1/4"
3/8"
0.032
0.157
0.060
0.185
0.084
0.209
0.106
0.231
0.065
0.058
0.049
0.042
INSIDE DIAMETER (INCH)
0.120
0.134
0.152
0.166
0.245
0.259
0.277
0.291
1/2"
5/8"
3/4"
7/8"
1"
1-1/4"
1-1/2"
1-3/4"
2"
2-1/4"
2-1/2"
2-3/4"
3"
3-1/4"
3-1/2"
3-3/4"
4"
4-1/4"
4-1/2"
0.282
0.407
0.532
0.657
0.782
1.032
1.282
1.532
1.782
2.032
2.282
2.532
2.782
3.032
3.282
3.532
3.782
4.032
4.282
0.310
0.435
0.560
0.685
0.810
1.060
1.310
1.560
1.810
2.060
2.310
2.560
2.810
3.060
3.310
3.560
3.810
4.060
4.310
0.334
0.459
0.584
0.709
0.834
1.084
1.334
1.584
1.834
2.084
2.334
2.584
2.834
3.084
3.334
3.584
3.834
4.084
4.334
0.356
0.481
0.606
0.731
0.856
1.106
1.356
1.606
1.856
2.106
2.356
2.606
2.856
3.106
3.356
3.606
3.856
4.106
4.356
0.370
0.495
0.620
0.745
0.870
1.120
1.370
1.620
1.870
2.120
2.370
2.620
2.870
3.120
3.370
3.620
3.870
4.120
4.370
0.384
0.509
0.634
0.759
0.884
1.134
1.384
1.634
1.884
2.134
2.384
2.634
2.884
3.134
3.384
3.634
3.884
4.134
4.384
18
0.402
0.527
0.652
0.777
0.902
1.152
1.402
1.652
1.902
2.152
2.402
2.652
2.902
3.152
3.402
3.652
3.902
4.152
4.402
0.416
0.541
0.666
0.791
0.916
1.166
1.416
1.666
1.916

TABLES AND FORMULAS
BIRMINGHAM WIRE GAUGE TABLE METRIC
TUBE SIZES
B.W.G
Wall
Thickness
00
9.652
0
8.636
1
7.620
2
7.214
3
6.579
6.045
5.588
6
5.156
7
4.572
10
11
4.191
3.759
3.404
3.048
INSIDE DIAMETER (METRIC)
OUTSIDE DIAMETER
1/4"
6.350 mm
3/8"
9.525 mm
1/2"
12.700 mm
5/8"
15.875 mm
3/4"
19.050 mm
1.778
1.143
2.007
2.717
3.429
0.610
1.524
2.388
3.556
4.318
5.182
5.892
6.604
0.635
1.447
2.717
3.785
4.699
5.563
6.731
7.493
8.357
9.067
9.779
3.810
4.622
5.892
6.960
7.874
8.738
9.906
10.668
11.532
12.242
12.954
7/8"
22.225 mm
2.921
4.953
6.985
7.797
9.067
10.135
11.049
11.913
13.081
13.843
14.707
15.417
16.129
1"
25.400 mm
6.096
8.128
10.160
10.972
12.242
13.310
14.224
15.088
16.256
17.018
17.882
18.592
19.304
1-1/4" 31.750 mm 12.446 14.478
16.510
17.322
18.592
19.660
20.574
21.438
22.606
23.368
24.232
24.942
25.654
1-1/2" 38.100 mm 18.796 20.828
22.860
23.672
24.942
26.010
26.924
27.788
28.956
29.718
30.582
31.292
32.004
1-3/4" 44.450 mm 25.146 27.178
29.210
30.022
31.292
32.360
33.274
34.138
35.306
36.068
36.932
37.642
38.354
2"
50.800 mm 31.496 33.528
35.560
36.372
37.642
38.710
39.624
40.488
41.656
42.418
43.282
43.992
44.704
2-1/4" 57.150 mm 37.846 39.878
41.910
42.722
43.992
45.060
45.974
46.838
48.006
48.768
49.632
50.342
51.054
2-1/2" 63.500 mm 44.196 46.228
48.260
49.072
50.342
51.410
52.324
53.188
54.356
55.118
55.982
56.692
57.404
2-3/4" 69.850 mm 50.546 52.578
54.610
55.422
56.692
57.760
58.674
59.538
60.706
61.468
62.332
63.042
63.754
3"
76.200 mm 56.896 58.928
60.960
61.772
63.042
64.110
65.024
65.888
67.056
67.818
68.682
69.392
70.104
3-1/4" 82.550 mm 63.246 65.278
67.310
68.122
69.392
70.460
71.374
72.238
73.406
74.168
75.032
75.742
76.454
3-1/2" 88.900 mm 69.596 71.628
73.660
74.472
75.742
76.810
77.724
78.588
79.756
80.518
81.382
82.092
82.804
3-3/4" 95.250 mm 75.946 77.978
80.010
80.822
82.092
83.160
84.074
84.938
86.106
86.868
87.732
88.442
89.154
4"
101.600 mm 82.296 84.328
86.360
87.172
88.442
89.510
90.424
91.288
92.456
93.218
94.082
94.792
95.504
4-1/4" 107.950 mm 88.646 90.678
92.710
93.522
94.792
95.860
96.774
97.638
98.806
99.568 100.432 101.142 101.854
4-1/2" 114.300 mm 94.996 97.028
99.060
99.872 101.142 102.210 103.124 103.988 105.156 105.918 106.782 107.492 108.204
BIRMINGHAM WIRE GAUGE TABLE METRIC

TUBE SIZES
B.W.G
Wall
Thickness
2.769
12
2.413
13
2.108
14
1.829
15
16
23
24
0.889
0.813
0.711
0.635
0.559
1/4"
6.350 mm
0.812
1.524
2.134
2.692
3.048
3.404
3.860
3/8"
9.525 mm
3.987
4.699
5.309
5.867
6.223
6.579
7.035
4.216
4.572
4.724
4.928
5.080
5.232
7.391
7.747
7.899
8.103
8.255
1/2"
12.700 mm
7.162
7.874
8.484
9.042
9.398
9.754
8.407
10.210
10.566
10.922
11.074
11.278
11.430
11.582
5/8"
15.875 mm 10.337 11.049
11.659
12.217
12.573
3/4"
19.050 mm 13.512 14.224
14.834
15.392
15.748
12.929
13.385
13.741
14.097
14.249
14.453
14.605
14.757
16.104
16.560
16.916
17.272
17.424
17.628
17.780
7/8"
22.225 mm 16.687 17.399
18.009
18.567
17.932
18.923
19.279
19.735
20.091
20.447
20.599
20.803
20.955
1"
25.400 mm 19.862 20.574
21.184
21.107
21.742
22.098
22.454
22.910
23.266
23.622
23.774
23.978
24.130
24.282
1-1/4" 31.750 mm 26.212 26.924

1-1/2" 38.100 mm 32.562 33.274
27.534
28.092
28.448
28.804
29.260
29.616
29.972
30.124
30.328
30.480
30.632
33.884
34.442
34.798
35.154
35.610
35.966
36.322
36.474
36.678
36.830
36.982
1-3/4" 44.450 mm 38.912 39.624
40.234
40.792
41.148
41.504
41.960
42.316
42.672
42.824
43.028
43.180
43.332
2"
50.800 mm 45.262 45.974
46.584
47.142
47.498
47.854
48.310
48.666
49.022
49.174
49.378
49.530
49.682
2-1/4" 57.150 mm 51.612 52.324
52.934
53.492
53.848
54.204
54.660
2-1/2" 63.500 mm 57.962 58.674
59.284
59.842
60.198
60.554
61.010
2-3/4" 69.850 mm 64.312 65.024
65.634
66.192
66.548
66.904
67.360
3"
76.200 mm 70.662 71.374
71.984
72.542
72.898
73.254
73.710
3-1/4" 82.550 mm 77.012 77.724
78.334
78.892
79.248
79.604
80.060
3-1/2" 88.900 mm 83.362 84.074
84.684
85.242
85.598
85.954
86.410
3-3/4" 95.250 mm 89.712 90.424
91.034
91.592
91.948
92.304
92.760
4"
97.384
97.942
98.298
98.654
99.110
1.651
17
18
19
1.473
1.245
1.067
20
21
22
OUTSIDE DIAMETER
INSIDE DIAMETER (METRIC)
101.600 mm 96.062 96.774
4-1/4" 107.950 mm 102.412 103.124 103.734 104.292 104.648 105.004 105.460

4-1/2" 114.300 mm 108.762 109.474 110.084 110.642 110.998 111.354 111.810
53

TABLES AND FORMULAS
INCH TO METRIC TABLE CONVERSION
Fractional
Inch
Decimal
Inch
Millimetre
Fractional
Inch
Decimal
Inch
1/64
1/32
3/64
1/16
5/64
3/32
7/64
1/8
9/64
5/32
11/64
3/16
13/64
7/32
15/64
1/4
17/64
9/32
19/64
5/16
21/64
11/32
.0156
.0312
.0469
.0625
.0781
.0937
.1094
.125
.1406
.1562
.1719
.1875
.2031
.2187
.2344
.25
.2656
.2818
.2969
.3125
.3281
.3437
0.3969
0.7937
1.1906
1.5875
1.9843
2.3812
2.7781
3.175
3.5719
3.9687
4.3656
4.7625
5.1594
5.5562
5.9531
6.35
6.7469
7.1437
7.5406
7.9375
8.3344
8.7312
23/64
3/8
25/64
13/32
27/64
7/16
29/64
15/32
31/64
1/2
33/64
17/32
35/64
9/16
37/64
19/32
39/64
5/8
41/64
21/32
43/64
11/16
.3594
.375
.3906
.4062
.4219
.4375
.4531
.4687
.4844
.5
.5156
.5312
.5469
.5625
.5781
.5937
.6094
.625
.6406
.6562
.6719
.6875
9.1281
9.525
9.9219
10.3187
10.7156
11.1125
11.5094
11.9062
12.3031
12.7
13.0969
13.4937
13.8906
14.2875
14.6844
15.0812
15.4781
15.875
16.2719
16.6687
17.0656
17.4625
Fractional
Inch
Decimal
Inch
45/64
23/32
47/64
3/4
49/64
25/32
51/64
13/16
53/64
27/32
55/64
7/8
57/64
29/32
59/64
15/16
61/64
31/32
63/64
1
2
3
.7031
.7187
.7344
.75
.7656
.7812
.7969
.8125
.8281
.8437
.8594
.875
.8906
.9062
.9219
.9375
.9531
.9687
.9844
1
2
3
Millimetre
17.8594
18.2562
18.6531
19.05
19.4469
19.8437
20.2406
20.6375
21.0344
21.4312
21.8281
22.225
22.6219
23.0187
23.4156
23.8125
24.2094
24.6062
25.0031
25.4
50.8
76.2
U.S TO METRIC CONVERSION

FORMULAS
METRIC TO U.S CONVERSION

FORMULAS
To convert
To convert
Multiply By
Linear Measure
Inch (in) to Millimetre (mm)
Inch (in) to Centimetre (cm)
Foot (ft) to Metre (m)
25.400
2.540
0.305
Square Measures
Sq. Inch (sq. in) to Sq. Centimetre (cm2)
Sq. Foot (sq. ft) to Sq. Metre (m2)
Multiply By
Linear Measure
Millimetre (mm) to Inch (in)
Centimetre (cm) to Inch (in)
Metre (m) to Foot (ft)
0.039
0.394
3.281
6.452
0.093
Square Measures
Sq. Centimetre (cm2) to Sq. Inch (sq. in) 0.155
Sq. Metre (m2) to Sq. Foot (sq. ft)
10.760
Measures of Volume
Cu. Inch (cu. in) to Cu. Centimetre (cm3) 16.390
Cu. Foot (cu. ft) to Cu. Metre (m3)
0.028
U.S. Gallon (g) to Litre (l)
3.785
Imperial Gallon (imp. gal) to Litre (l)
4.546
Measures of Volume
Cu. Centimetre (cm3) to Cu. Inch (cu. in) 0.061
Cu. Metre (m3) to Cu. Foot (cu. ft)
35.310
Litre (l) to U.S. Gallon (g)
0.264
Litre (l) to Imperial Gallon (imp. gal)
0.219
Weight
Pound (lb) to Kilogram (kg)
0.454
Weight
Kilogram (kg) to Pound (lb)
Pressure
PSI to BAR
0.069
Pressure
BAR to PSI
Power
Horse Power (HP) to Kilowatt (kW)
0.746
Power
Kilowatt (kW) to Horse Power (HP)
To Convert
54
Millimetre
Subtract then Multiply By
Temperature
Fahrenheit (F) to Celsius (C)
32
5/9
To Convert
2.205
14.504
1.341
Multiply By then Add
Temperature
Celsius (C) to Fahrenheit (F)
9/5
32

INFORMATION SHEET
Tube o.d.
d . . . . . . . . . . . . . . . . . .mm
Tube wall thickn.
s . . . . . . . . . . . . . . . . . .mm
Tube material . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Dia. of tube sheet hole
D . . . . . . . . . . . . . . . . . .mm
Tube sheet thickness
B . . . . . . . . . . . . . . . . . .mm
Tube sheet material . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Length of rolling
WB . . . . . . . . . . . . . . . . . .mm
Tube protrusion
v . . . . . . . . . . . . . . . . . .mm
Tube recessing
r . . . . . . . . . . . . . . . . . .mm
Degree of angle
when belling
e..................
Minimum distance
between two holes
t . . . . . . . . . . . . . . . . . .mm
No. of tubes
..................
Straight tubes
Yes / No
U-tubes
Yes / No
Welded joint
Yes / No
Welded and expanded joint
Yes / No
Required expansion
of tube (one wall)
% ....................
Pressure
......................
Temperature
......................
For difficult
T . . . . . . . . . . . . . . . . . .mm
expansions
a . . . . . . . . . . . . . . . . . .mm
For recessing head, pilot ring and tool holder:
Bore
D . . . . . . . . . . . . . . . . . .mm
Distance bore-groove
. . . . . . . . . . . . . . . . . .mm
Groove
. . . . . . . . . . . . . . . . . .mm
Distance between grooves
. . . . . . . . . . . . . . . . . .mm
55
Rietschans 69 - 2352 BB Leiderdorp - The Netherlands

Telephone : (Int +31) (0) 71 5411771
Facsimile : (Int +31) (0) 71 5413801
e-mail: info@tecotubeexpanders.com
www.tecotubeexpanders.com
DISTRIBUTOR
TECO tube expander company have a policy of constant improvement

and its products are subject to change without notification.
Lawful disputes will only be handled in The Netherlands.

TECOtubeexpanders BROCHURE

Uploaded by

Copyright:

Available Formats

TECOtubeexpanders BROCHURE

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

TECOtubeexpanders BROCHURE

Uploaded by

Copyright:

Available Formats

tube expanders company

tube expanders company

tube expanders company

SPECIAL TUBE EXPANDERS

MANDREL EXTENSION AND

These can be supplied as standard or special length with

TECO tube expanders are of the self feeding and parallel

TUBE SIZE INFORMATION

The models CH-800 and CH-1200 Tube Expanders are

Tube O.D. refers to the measured outside diameter of a

STANDARD REVERSIBLE THRUST/COLLAR

THRUST RACE HOUSING

NUT WITH SETSCREW

tube expanders company

The type of use demanded of tube expanders is severe

Improperly rolled joints create additional expense to

A typical example of the application of this method is

I.D. Metal to Metal

6. Inspect the rolls and the mandrel after rolling each

NB: DO NOT LEAVE A RESIDUE OF LIGHT OIL ON THE

tube expanders company

Expander with 3/4" (19.05 mm) long rolls

Model: CH-800 Tube range: 1/2" to 1 3/4" O.D.

Special 4 or 5 roll models available.

Model: CH-8012 Tube range: 1 3/4" to 4 1/2" O.D.

tube expanders company

MIN. I.D. TUBE

TUBE EXPANDER WITH

TUBE EXPANDER WITH

ROLL SET EXPANDER ROLL SET

tube expanders company

MIN. I.D. TUBE

TUBE EXPANDER WITH

TUBE EXPANDER WITH

ROLL SET EXPANDER ROLL SET

tube expanders company

MIN. I.D. TUBE

TUBE EXPANDER WITH

TUBE EXPANDER WITH

ROLL SET EXPANDER ROLL SET

tube expanders company

MIN. I.D. TUBE

ROLL SET EXPANDER ROLL SET

tube expanders company

MIN. I.D. TUBE

TUBE EXPANDER WITH

TUBE EXPANDER WITH

ROLL SET EXPANDER

tube expanders company

MIN. I.D. TUBE

ROLL SET EXPANDER

Also available as four roll expander, sizes as five roll expanders.

tube expanders company

Expanders with 1 1/2" (38.1mm) long rolls will

Expanders with 2 1/4" (57.1mm) long rolls will

MIN. I.D. TUBE

Longer reaches available upon request in 2 inch (50.8 mm) increments.

ROLL SET EXPANDER

tube expanders company