ME 230 Kinematics and

Dynamics
Wei-Chih Wang
Department of Mechanical Engineering
University of Washington

Planar kinetics of a rigid body: Force and

acceleration
Chapter 17
Chapter objectives
Introduce the methods used to determine
the mass moment of inertia of a body
To develop the planar kinetic equations
of motion for a symmetric rigid body
To discuss applications of these
equations to bodies undergoing
translation, rotation about fixed axis, and
general plane motion
W. Wang

Lecture 18
Planar kinetics of a rigid body: Force and acceleration
Equations of Motion: Rotation about a Fixed Axis
Equations of Motion: General Plane Motion
- 17.4-17.5

W. Wang

Material covered

Planar kinetics of a
rigid body : Force
and acceleration

Equations of motion
1) Rotation about a
fixed axis
2) General plane motion
Next lectureStart
Chapter 18
W. Wang

Todays Objectives
Students should be able to:
1. Analyze the planar kinetics of a rigid body undergoing rotational
motion
2. Analyze the planar kinetics of a rigid body undergoing general plane
motion

W. Wang

Applications (17.4)
The crank on the oil-pump rig
undergoes rotation about a fixed axis,
caused by the driving torque M from a
motor.
As the crank turns, a dynamic reaction
is produced at the pin. This reaction is
a function of angular velocity, angular
acceleration, and the orientation of the
crank.
Pin at the center of
rotation.
W. Wang

If the motor exerts a constant torque M on

the crank, does the crank turn at a constant
angular velocity? Is this desirable for such
a machine?
6

APPLICATIONS (continued)
The pendulum of the Charpy
impact machine is released from
rest when = 0. Its angular
velocity () begins to increase.
Can we determine the angular
velocity when it is in vertical
position?
On which property (P) of the
pendulum does the angular
acceleration () depend?
What is the relationship between P
and ?
W. Wang

Applications (17.4) (continued)

The Catherine wheel is a

fireworks display consisting of a
coiled tube of powder pinned at its
center.

As the powder burns, the mass of powder

decreases as the exhaust gases produce a
force directed tangent to the wheel. This
force tends to rotate the wheel.
W. Wang

Equations of motion for pure rotation (17.4)

When a rigid body rotates about a fixed axis
perpendicular to the plane of the body at
point O, the bodys center of gravity G moves
in a circular path of radius rG. Thus, the
acceleration of point G can be represented by
a tangential component (aG)t = rG and a
normal component (aG)n = rG 2.
Since the body experiences an angular acceleration, its inertia
creates a moment of magnitude IG equal to the moment of
the external forces about point G. Thus, the scalar equations
of motion can be stated as: Fn = m (aG)n = m rG 2
Ft = m (aG)t = m rG
W. Wang
9
MG = IG

Equations of motion for pure rotation (17.4)

(continues)
Note that the MG moment equation may be replaced by a
moment summation about any arbitrary point. Summing the
moment about the center of rotation O yields
MO = IG + rG m (aG) t = (IG + m (rG)2 )
From the parallel axis theorem, IO = IG + m(rG)2, therefore
the term in parentheses represents IO. Consequently, we can
write the three equations of motion for the body as:
Fn = m (aG) n = m rG 2
Ft = m (aG) t = m rG
W. Wang

MO = IO

10

Procedure of analysis (17.4)

Problems involving the kinetics of a rigid body rotating about
a fixed axis can be solved using the following process.
1. Establish an inertial coordinate system and specify the sign and
direction of (aG)n and (aG)t.
2. Draw a free body diagram accounting for all external forces
and couples. Show the resulting inertia forces and couple
(typically on a separate kinetic diagram).
3. Compute the mass moment of inertia IG or IO.
4. Write the three equations of motion and identify the
unknowns. Solve for the unknowns.
5. Use kinematics if there are more than three unknowns (since
the equations of motion allow for only three unknowns).
W. Wang

11

Example (17.4)

Given:A rod with mass of 20 kg is rotating at 5 rad/s at the instant

shown. A moment of 60 Nm is applied to the rod.
Find: The angular acceleration and the reaction at pin O when
the rod is in the horizontal position.
Plan: Since the mass center, G, moves in a circle of radius
1.5 m, its acceleration has a normal component toward O
and a tangential component acting downward and
perpendicular to rG. Apply the problem solving procedure.
W. Wang

12

Example (17.4) continues

Solution:
FBD & Kinetic Diagram

Equations of motion:
+ Fn = man = mrG2
On = 20(1.5)(5)2 = 750 N
+ Ft = mat = mrG
-Ot + 20(9.81) = 20(1.5)
+ MO = IG + m rG (rG)

Using IG = (ml2)/12 and rG = (0.5)(l), we can write:

MO = [(ml2/12) + (ml2/4)] = (ml2/3) where (ml2/3) = IO.
After substituting:
60 + 20(9.81)(1.5) = 20(32/3)
W. Wang

Solving: = 5.9 rad/s2

Ot = 19 N

13

EXAMPLE
Given:The uniform slender rod has a
mass of 15 kg and its mass
center is at point G.
G

Find: The reactions at the pin O and

the angular acceleration of the
rod just after the cord is cut.

Plan: Since the mass center, G, moves in a circle of radius

0.15 m, its acceleration has a normal component toward
O and a tangential component acting downward and
perpendicular to rG.
Apply the problem solving procedure.
W. Wang

14

EXAMPLE (continued)

Solution:
FBD

&
rG

Kinetic Diagram

Equations of motion:
+ Fn = man = mrG2

Ox = 0 N

+ Ft = mat = mrG

-Oy + 15(9.81) = 15(0.15)

+ MO = IG + m rG (rG) (0.15) 15(9.81)= IG + m(rG)2

Using IG = (ml2)/12 and rG = (0.15), we can write:
IG + m(rG)2 = [(150.92)/12 + 15(0.15)2] 1.35
W. Wang

15

EXAMPLE (continued)
FBD

&
rG

Kinetic Diagram

After substituting:
22.07 = 1.35 rad/s2
From Eq (1) :
-Oy + 15(9.81) = 15(0.15)
Oy = 15(9.81) 15(0.15)
W. Wang

16

CONCEPT QUIZ
1. If a rigid bar of length l (above) is released
from rest in the horizontal position ( = 0),
the magnitude of its angular acceleration is
at maximum when
A) = 0

B) = 90

C) = 180

D) = 0 and 180

2. In the above problem, when = 90, the horizontal

component of the reaction at pin O is __________.
A) zero

B) m g

C) m (l/2) 2

D) None of the above

W. Wang

17

Example
Given: msphere = 15 kg,
mrod = 10 kg.
The pendulum has an
angular velocity of 3 rad/s
when = 45 and the
external moment of 50 N m.
Find: The reaction at the pin O
when = 45.
Plan:
Draw the free body diagram and kinetic diagram of the
rod and sphere as one unit.
Then apply the equations of motion.
W. Wang

18

Example (continued)
Solution: FBD and kinetic diagram;

45

45
=

Equations of motion: Fn = m(aG)n

Fn = m (aG) n = m rG 2

On 10 (9.81) cos45 15 (9.81) cos45 = 10(0.3)2 + 15(0.7)2

Since = 3 rad/s On = 295 N
W. Wang

19

Example (continued)
45

45

Ft = m (aG) t = m rG
MO = IO IG + rG m (aG) t = (IG + m (rG)2 )
Ft = m(aG)t
Ot +10 (9.81) sin45 +15 (9.81) sin45 = 10(0.3) + 15(0.7)
Ot = -173.4 + 13.5

MO = Io
10 (9.81) cos45 (0.3) + 15 (9.81) cos45 (0.7) + 50
= [(1/3) 10 (0.6)2]rod [(2/5) 15 (0.1)2 + 15 (0.7)2]sphere
20
W. Wang
= 16.7 rad/s2

Example (continued)
45

W. Wang

45

21

W. Wang

22

Applications (17.5)

As the soil compactor accelerates

forward, the front roller experiences
general plane motion (both translation
and rotation).

=
W. Wang

The forces shown on the

rollers FBD cause the
accelerations shown on the
kinetic diagram.
23

Applications (17.5) (continued)

During an impact, the center of gravity of this crash dummy will

decelerate with the vehicle, but also experience another
acceleration due to its rotation about point A.
How can engineers use this information to determine the forces
exerted by the seat belt on a passenger during a crash?
W. Wang

24

General plane motion (17.5)

When a rigid body is subjected to external
forces and couple-moments, it can
undergo both translational motion as well
as rotational motion. This combination is
called general plane motion.
Using an x-y inertial coordinate
system, the equations of motions about
the center of mass, G, may be written
as
Fx = m (aG)x
P
W. Wang

Fy = m (aG)y
MG = IG

25

General plane motion (17.5) continues

Sometimes, it may be convenient to write
the moment equation about some point P
other than G. Then the equations of
motion are written as follows.
Fx = m (aG)x
Fy = m (aG)y
MP = (Mk )=IG + rG m (aG) t=(IG + m (rG)2 )
P
W. Wang

In this case, (Mk )P represents the sum of the

moments of IG and maG about point P.
26

Frictional rolling problems

When analyzing the rolling motion of wheels, cylinders, or disks,
it may not be known if the body rolls without slipping or if it
slides as it rolls.
For example, consider a disk with mass m
and radius r, subjected to a known force P.
The equations of motion will be
Fx = m(aG)x => P - F = maG
Fy = m(aG)y => N - mg = 0
MG = IG

=> F r = IG

There are 4 unknowns (F, N, and aG) in

these three equations.
W. Wang

27

Frictional rolling problems (continued)

Hence, we have to make an assumption
to provide another equation. Then we
can solve for the unknowns.
The 4th equation can be obtained from
the slip or non-slip condition of the disk.
Case 1:
Assume no slipping and use aG = r as the 4th equation and
DO NOT use Ff = sN. After solving, you will need to verify
that the assumption was correct by checking if Ff sN.
Case 2:
Assume slipping and use Ff = kN as the 4th equation. In
this
case, aG r.
W. Wang
28

Rolling Friction
A rolling wheel requires a certain amount of friction so that the point of
contact of the wheel with the surface will not slip. The amount of traction
which can be obtained for an auto tire is determined by the coefficient of static
friction between the tire and the road. If the wheel is locked and sliding, the
force of friction is determined by the coefficient of kinetic friction and is
usually significantly less.
Assuming that a wheel is rolling without slipping, the surface friction does no
work against the motion of the wheel and no energy is lost at that point.
However, there is some loss of energy and some deceleration from friction for
any real wheel, and this is sometimes referred to as rolling friction. It is partly
friction at the axle and can be partly due to flexing of the wheel which will
dissipate some energy. Figures of 0.02 to 0.06 have been reported as effective
coefficients of rolling friction for automobile tires, compared to about 0.8 for
the maximum static friction coefficient between the tire and the road.
W. Wang

29

Procedure of analysis (17.5)

Problems involving the kinetics of a rigid body undergoing
general plane motion can be solved using the following procedure.
1. Establish the x-y inertial coordinate system. Draw both the
free body diagram and kinetic diagram for the body.
2. Specify the direction and sense of the acceleration of the
mass center, aG, and the angular acceleration of the body.
If necessary, compute the bodys mass moment of inertia IG.
3. If the moment equation Mp= (Mk)p is used, use the
kinetic diagram to help visualize the moments developed by
the components m(aG)x, m(aG)y, and IG
4. Apply the three equations of motion.
W. Wang

30

Procedure of analysis (17.5) continues

5. Identify the unknowns. If necessary (i.e., there are four
unknowns), make your slip-no slip assumption (typically no
slipping, or the use of aG r, is assumed first).
6. Use kinematic equations as necessary to complete the
solution.
7. If a slip-no slip assumption was made, check its validity!!!
Key points to consider:
1. Be consistent in assumed directions. The direction of aG
must be consistent with .
2. If Ff = kN is used, Ff must oppose the motion. As a test,
assume no friction and observe the resulting motion. This
may help visualize the correct direction of Ff.
W. Wang

31

Example (17.5)

Given: A spool has a mass of 8 kg and a radius of gyration (kG)

of 0.35 m. Cords of negligible mass are wrapped around
its inner hub and outer rim. There is no slipping.
Find: The angular acceleration () of the spool.
Plan: Focus on the spool. Follow the solution procedure (draw
a FBD, etc.) and identify the unknowns.
W. Wang

32

Example (17.5) continues

Solution:
The moment of inertia of the spool is
IG = m (kG)2 = 8 (0.35)2 = 0.980 kgm 2
Method I
Equations of motion:
Fy = m (aG)y
T + 100 -78.48 = 8 aG
MG = IG
100 (0.2) T(0.5) = 0.98
There are three unknowns, T, aG, We need one more equation
to solve for 3 unknowns. Since the spool rolls on the cord at point
A without slipping, aG r. So the third equation is: aG 0.5
Solving these three equations, we find:
10.3 rad/s2, aG 5.16 m/s2, T = 19.8 N
W. Wang

33

Example (17.5) continues

Method II
Now, instead of using a moment
equation about G, a moment equation
about A will be used. This approach will
eliminate the unknown cord tension (T).

MA= (Mk)A: 100 (0.7) - 78.48(0.5) = 0.98 + (8 aG)(

Using the non-slipping condition again yields aG = 0.5.
Solving these two equations, we get
= 10.3 rad/s2, aG = 5.16 m/s2

W. Wang

34

Homework Assignment
Chapter17- 6, 23, 27,33, 38, 43, 53, 59, 74, 79,95,
98, 102,109
Due next Monday !!!

W. Wang

35

Exams

W. Wang

36

Chapter reviews
Chapter 12: pages 101-105
Chapter 13: pages 166-167
Chapter 14: pages 217-219
Chapter 15: pages 295-297
Chapter 16: pages 391-393
Chapter 17: pages 452-453
Chapter 18: pages 490-493
Chapter 19: pages 531-533

Book chapter reviews give you a good but brief idea

about
W. Wang each chapter
37

General exam rules

Midterm exam will consist of 4 questions. 3 questions
must be solved. The 4th question will be a bonus
question.
Midterm exam counts for 25% of the total mark
Come on time. Since the lecture theatre will be used for
another class at 1:30, there will be no extra time
All problems except the bonus question will be
solved symbolically just like last time.

W. Wang

38

Planar kinetics of a rigid body: Work and

Energy
Chapter 18
Chapter objectives
Develop formulations for the kinetic
energy of a body, and define the various
ways a force and couple do work.
Apply the principle of work and energy
to solve rigid-body planar kinetic
problems that involve force, velocity and
displacement
Show how the conservation of energy
can be used to solve rigid-body planar
kinetic problems
W. Wang

39

Lecture 19
Planar kinetics of a rigid body: Work and Energy
Kinetic energy
Work of a force
Work of a couple
Principle of work and energy
- 18.1-18.4

W. Wang

40

Material covered

Planar kinetics of a
rigid body :Work
and Energy

18.1: Kinetic Energy

18.2: The Work of a Force
18.3: The work of a couple
18.4: Principle of Work
and Energy

Next lecture18.5
W. Wang

41

Todays Objectives
Students should be able to:
1. Define the various ways that a force and couple do work.
2. Apply the principle of work and energy to a rigid body

W. Wang

42

Applications 1

The work of the torque (or moment) developed by the driving

gears on the two motors on the concrete mixer is transformed
into rotational kinetic energy of the mixing drum.
If the motor gear characteristics are known, could the velocity
of the mixing drum be found?
W. Wang

43

Applications 2

The work done by the soil compactor's engine is transformed

into translational kinetic energy of the frame and translational
and rotational kinetic energy of its roller and wheels
(excluding the additional kinetic energy developed by the
moving parts of the engine and drive train).
Are the kinetic energies of the frame and the roller related to
each other? How?
W. Wang

44

Kinetic energy (18.1)

The kinetic energy of a rigid body can be expressed as the
sum of its translational and rotational kinetic energies. In
equation form, a body in general plane motion has kinetic
energy given by
T = 1/2 m (vG)2 + 1/2 IG 2
Several simplifications can occur.
1. Pure Translation: When a rigid body
is subjected to only curvilinear or
rectilinear translation, the rotational
kinetic energy is zero
( = 0). Therefore,
T = 1/2 m (vG)2
W. Wang

45

Kinetic energy (18.1) continues

2. Pure Rotation: When a rigid body is
rotating about a fixed axis passing through
point O, the body has both translational and
rotational kinetic energy. Thus,
T = 0.5m(vG)2 + 0.5IG2
Since vG = rG, we can express the kinetic
energy of the body as
T = 0.5(IG + m(rG)2)2 = 0.5IO2
If the rotation occurs about the mass center, G, then what is the
value of vG?
In this case, the velocity of the mass center is equal to zero. So
the kinetic energy equation reduces to
W. Wang

T = 0.5 IG 2

46

The work of a force (18.2)

Recall that the work done by a force can be written as
UF = Fdr = (F cos ds.
s

When the force is constant, this equation reduces to

UFc = (Fc cos)s where Fccos represents the component of the
force acting in the direction of displacement s.
Work of a weight: As before, the work
can be expressed as Uw = -Wy.
Remember, if the force and movement are
in the same direction, the work is positive.
Work of a spring force: For a linear spring,
the work is
Us = -0.5k[(s2)2 (s1)2]
W. Wang

47

Forces that do no work

There are some external forces that do no work. For
instance, reactions at fixed supports do no work because
the displacement at their point of application is zero.
Normal forces and friction forces acting
on bodies as they roll without slipping
over a rough surface also do no work
since there is no instantaneous
displacement of the point in contact
with ground (it is an instant center, IC).
Internal forces do no work because they always act in equal
and opposite pairs. Thus, the sum of their work is zero.
W. Wang

48

The work of a couple (18.3)

When a body subjected to a couple experiences
general plane motion, the two couple forces do
work only when the body undergoes rotation.
If the body rotates through an angular
displacement d, the work of the couple
moment, M, is

UM M d
1

If the couple moment, M, is constant, then

UM = M (2 1)
Here the work is positive, provided M and (2 1) are in
the same direction.

W. Wang

49

Principle of work and energy (18.4)

Recall the statement of the principle of work and energy
used earlier:
T1 + U1-2 = T2
In the case of general plane motion, this equation states
that the sum of the initial kinetic energy (both
translational and rotational) and the work done by all
external forces and couple moments equals the bodys
final kinetic energy (translational and rotational).
This equation is a scalar equation. It can be applied to a
system of rigid bodies by summing contributions from all
bodies.
W. Wang

50

Moment of Inertia

Moment of inertia is the name given to rotational inertia, the

rotational analog of mass for linear motion. For a point mass the
moment of inertia is just the mass times the square of perpendicular
2
W. Wang to the rotation axis, I = mr .
51
distance

Example
Given:The disk weighs 40 lb and
has a radius of gyration
(kG) of 0.6 ft. A 15 ftlb
moment is applied and the
spring has a spring
constant of 10 lb/ft.
Find: The angular velocity of the wheel when point G moves
0.5 ft. The wheel starts from rest and rolls without
slipping. The spring is initially un-stretched.
Plan: Use the principle of work and energy since distance is the
primary parameter. Draw a free body diagram of the disk
and calculate the work of the external forces.
W. Wang

52

Example continues
Solution:
Free body diagram of the disk:
Since the body rolls without slipping
on a horizontal surface, only the
spring force and couple moment M
do work.
Since the spring is attached to the
top of the wheel, it will stretch
twice the amount of displacement
of G, or 1 ft.
W. Wang

53

Example continues
Work: U1-2 = -0.5k[(s2)2 (s1)2] + M(2 1)
U1-2 = -0.5(10)(12 0) + 15(0.5/0.8) = 4.375 ftlb
Kinematic relation: vG = r = 0.8
Kinetic energy: T1 = 0
T2 = 0.5m (vG)2 + 0.5 IG 2
T2 = 0.5(40/32.2)(0.8)2 + 0.5(40/32.2)(0.6)22
T2 = 0.621 2
Work and energy: T1 + U1-2 = T2
0 + 4.375 = 0.621 2
= 2.65 rad/s
W. Wang

54

EXAMPLE
Given:The 50 kg wheel is subjected
to a force of 50 N. The
radius of gyration of the
wheel about its mass center
O is kO = 0.3 m.
Find: The angular velocity of the wheel after it has rotated
10 revolutions. The wheel starts from rest and rolls
without slipping.
Plan: Use the principle of work and energy to solve the
problem since distance is the primary parameter. Draw a
free body diagram of the wheel and calculate the work of
the external forces.
W. Wang

55

EXAMPLE (continued)
Solution:

Free body diagram of the wheel:

Since the wheel rolls without

slipping on a horizontal surface, only
the force Ps horizontal component
does work.
Why dont forces Py, Ff and N do
any work?

W. Wang

56

EXAMPLE (continued)
Work:
U1-2 = Fdr = (P cos ds.
U1-2 = (50 cos 30o) 10( 0.8) = 1088 Nm
Kinematic relation: vO = r = 0.4

2r

Kinetic energy:
T1 = 0
T2 = 0.5 m (vO)2 + 0.5 IO 2
= 0.5(50) (0.4 )2 + 0.5 (50) (0.3)2 2
T2 = 6.25 2
Work and energy: T1 + U1-2 = T2
0 + 1088 = 6.25 2
= 13.2 rad/s
W. Wang

57

CONCEPT QUIZ
1. If a rigid body rotates about its center of gravity, its
translational kinetic energy is ___________ at all times.
A)
B)
C)
D)

constant
equal to its rotational kinetic energy
zero
Cannot be determined

2. A rigid bar of mass m and length L is released from rest in

the horizontal position. What is the rods angular velocity
when it has rotated through 90?
m

A) g/3L
B) 3g/L
L
C) 12g/L D) g/L
W. Wang

58

Example
Given: The combined weight of
the load and the platform is
200 lb, with the center of
gravity located at G. A
couple moment is applied
to link AB. The system is at
rest when = 0. Neglect
the weight of the links.
Find: The angular velocity of
links AB & CD at = 60o.
Plan: Since the problem involves distance, the principle of
work and energy is an efficient solution method.
W. Wang

59

Example (continued)
Solution: Work done by the external loads
Calculate the vertical distance the mass center moves.

4 sin

y = 4 sin where = 60
Then, determine the work due to
the weight.
Uw = -W y = - W (4 sin )
Uw = - 200 (4 sin o)
= - 692.8 ftlb

Work due to the moment (careful of s units!):

UM = M = 900 (60) (/180) = 942.5 ftlb
Therefore, U1-2 = - 692.8 + 942.5 = 249.7 ftlb
W. Wang

60

Example (continued)
As links AB and CD rotate, the platform will be subjected to only
curvilinear translational motion with a speed of 4
Kinetic energy:
T1 = 0
T2 = 0.5 m (vG)2
= 0.5 (200/32.2) (4)2
= 49.69 2 ftlb
Now apply the principle of work and energy equation:
T1 + U1-2 = T2
0 + 249.7 = 49.69 2
= 2.24 rad/s
W. Wang

61

Homework Assignment
Chapter18- 17, 37, 43, 47
Due next Wednesday !!!

W. Wang

62

Homework Assignment
Chapter17- 6, 23, 27,33, 38, 43, 53, 59, 74, 79,95,
98, 102,109
Due next Monday !!!

W. Wang

63

Chapter reviews
Chapter 12: pages 101-105
Chapter 13: pages 166-167
Chapter 14: pages 217-219
Chapter 15: pages 295-297
Chapter 16: pages 391-393
Chapter 17: pages 452-453
Chapter 18: pages 490-493
Chapter 19: pages 531-533

Book chapter reviews give you a good but brief idea

about
W. Wang each chapter
64

General exam rules

Midterm exam will consist of 4 questions. 3 questions
must be solved. The 4th question will be a bonus
question.
Midterm exam counts for 25% of the total mark
Come on time. Since the lecture theatre will be used for
another class at 1:30, there will be no extra time
All problems except the bonus question will be
solved symbolically just like last time.

W. Wang

65

Chapter 15: make sure you review the

conservation of momentum and conservation of
energy.

W. Wang

66

Principle of linear impulse and momentum for

a system of particles
(Section 15.2)
For the system of particles shown, the
internal forces fi between particles
always occur in pairs with equal
magnitude and opposite directions.
Thus the internal impulses sum to
zero.
The linear impulse and momentum equation for this system
only includes the impulse of external forces.
t2
mi(vi)1 Fi dt mi(vi)2
t1
W. Wang

Conservation of linear momentum for a system of particles

(Section 15.3)
When the sum of external impulses acting on a
system of objects is zero, the linear impulsemomentum equation simplifies to
mi(vi)1 = mi(vi)2
This important equation is referred to as the
conservation of linear momentum. Conservation of
linear momentum is often applied when particles
collide or interact. When particles impact, only
impulsive forces cause a change of linear momentum.
The sledgehammer applies an impulsive force to the stake. The weight
of the stake can be considered negligible, or non-impulsive, as compared
to the force of the sledgehammer. Also, provided the stake is driven into
soft ground with little resistance, the impulse of the grounds reaction on
Wang can also be considered negligible or non-impulsive.
theW.stake

Central impact (continued)

In most problems, the initial velocities of the particles, (vA)1 and
(vB)1, are known, and it is necessary to determine the final
velocities, (vA)2 and (vB)2. So the first equation used is the
conservation of linear momentum, applied along the line of impact.
(mA vA)1 + (mB vB)1 = (mA vA)2 + (mB vB)2
This provides one equation, but there are usually two unknowns,
(vA)2 and (vB)2. So another equation is needed. The principle of
impulse and momentum is used to develop this equation, which
involves the coefficient of restitution, or e.
W. Wang

Central impact (continued)

The coefficient of restitution, e, is the ratio of the particles
relative separation velocity after impact, (vB)2 (vA)2, to the
particles relative approach velocity before impact, (vA)1 (vB)1.
The coefficient of restitution is also an indicator of the energy
lost during the impact.
The equation defining the coefficient of restitution, e, is
e =

(vB)2 (vA)2
(vA)1 - (vB)1

If a value for e is specified, this relation provides the second

equation necessary to solve for (vA)2 and (vB)2.
W. Wang

W. Wang

Relationship between moment of a force and

angular momentum (15.6)
The resultant force acting on the particle is equal to the time
rate of change of the particles linear momentum. Showing the
time derivative using the familiar dot notation results in the
equation
F = L = mv

We can prove that the resultant moment acting on the particle

about point O is equal to the time rate of change of the
particles angular momentum about point O or
Mo = r x F = Ho
W. Wang

MOMENT AND ANGULAR MOMENTUM OF

A SYSTEM OF PARTICLES

The forces acting on the i-th particle of

the system consist of a resultant external
force Fi and a resultant internal force fi.

W. Wang

Angular impulse and momentum principles

(Section 15.7)
Considering the relationship between moment and time rate
of change of angular momentum
Mo = Ho = dHo/dt

By integrating between the time interval t1 to t2

t2

Mo dt ( Ho )2 ( Ho )1
t1

t2

or

( Ho )1 +

Mo dt ( Ho )2
t1

This equation is referred to as the principle of angular impulse and

momentum. The second term on the left side, Mo dt, is called the
angular impulse. In cases of 2D motion, it can be applied as a
scalar equation using components about the z-axis.
W. Wang

Chapter 16: Planar kinematics of a rigid body

W. Wang

75

W.Wang

76

W.Wang

77

Rigid body rotation Velocity of point P

The magnitude of the velocity of P is
equal to r (the text provides the
derivation). The velocitys direction is
tangent to the circular path of P.
In the vector formulation, the magnitude
and direction of v can be determined
from the cross product of and rp .
Here rp is a vector from any point on the
axis of rotation to P.
v = x rp = x r
The direction of v is determined by the
right-hand rule.
W.Wang

78

Rigid body rotation Acceleration of point P

(continued)
Using the vector formulation, the acceleration
of P can also be defined by differentiating the
velocity. (we derived it earlier in week 2)
a = dv/dt = d/dt x rP + x drP/dt
= x rP + x ( x rP)
It can be shown that this equation reduces to
a = x r 2r = at + an
The magnitude of the acceleration vector is a = (at)2 + (an)2
W.Wang

79

Rigid body rotation Acceleration of point P

(continued)
Using the vector formulation, the acceleration
of P can also be defined by differentiating the
velocity. (we derived it earlier in week 2)
a = dv/dt = d/dt x rP + x drP/dt
= x rP + x ( x rP)
It can be shown that this equation reduces to
a = x r 2r = at + an
The magnitude of the acceleration vector is a = (at)2 + (an)2
W.Wang

80

Acceleration in the n-t coordinate system II

The tangential component of acceleration is constant, at = (at)c.
In this case,
s = so + vot + (1/2)(at)ct2
Rigid body rotation:
v = vo + (at)ct
a = x r 2r = at + an
v2 = (vo)2 + 2(at)c(s so)
a = vut + (v2/)un = atut + anun
As before, so and vo are the initial position and velocity of the
particle at t = 0
W.Wang

81

+
=
=(
=(

)+(2
) ur +(2

+
+

) u

Rigid body rotation:

a = x r 2r = at + an
W.Wang

82

W.Wang

83

t= t1

t= t2

W.Wang

84

W.Wang

85

Chapter 17:
Planar kinetics of a rigid body: Force and acceleration

W. Wang

86

Moment of Inertia

Moment of inertia is the name given to rotational inertia, the

rotational analog of mass for linear motion. For a point mass the
moment of inertia is just the mass times the square of perpendicular
2
W. Wang to the rotation axis, I = mr .
87
distance

Equations of motion: Translation (17.3)

When a rigid body undergoes only translation, all the particles of
the body have the same acceleration so aG = a and = 0. The
equations of motion become:
Fx = m(aG)x
Fy = m(aG)y
MG = 0
Note that, if it makes the problem easier, the moment equation
can be applied about other points instead of the mass center. In
this case,
MA = rG maG =(m aG ) d .
W. Wang

88

Equations of motion: Translation (17.3)

(continues)
When a rigid body is subjected to
curvilinear translation, it is best to
use an n-t coordinate system. Then
apply the equations of motion, as
written below, for n-t coordinates.
Fn = m(aG)n
Ft = m(aG)t
MG = 0 or
MB = rG maG =e[m(aG)t] h[m(aG)n]
W. Wang

89

Equations of motion for pure rotation (17.4)

(continues)
Note that the MG moment equation may be replaced by a
moment summation about any arbitrary point. Summing the
moment about the center of rotation O yields
MO = IG + rG m (aG) t = (IG + m (rG)2 )
From the parallel axis theorem, IO = IG + m(rG)2, therefore
the term in parentheses represents IO. Consequently, we can
write the three equations of motion for the body as:
Fn = m (aG) n = m rG 2
Ft = m (aG) t = m rG
W. Wang

MO = IO

90

General plane motion (17.5) continues

Sometimes, it may be convenient to write
the moment equation about some point P
other than G. Then the equations of
motion are written as follows.
Fx = m (aG)x
Fy = m (aG)y
MP = (Mk )=IG + rG m (aG) t=(IG + m (rG)2 )
P
W. Wang

In this case, (Mk )P represents the sum of the

moments of IG and maG about point P.
91

Remember

next time is Exam time

W. Wang

92

W. Wang

93