Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 456 views

    Sirio 827

    Uploaded by

    10sd156
    The document provides instructions for mounting the SIRIO 827 base antenna. It has a frequency range of 26-29 MHz and comes with telescopic sections that extend to create the antenna mast. The instructions describe inserting sections to create the mast and attaching radials to the base for grounding.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Sirio 827

    Uploaded by

    10sd156
    456 views2 pages
    The document provides instructions for mounting the SIRIO 827 base antenna. It has a frequency range of 26-29 MHz and comes with telescopic sections that extend to create the antenna mast. The instructions describe inserting sections to create the mast and attaching radials to the base for grounding.

    Original Description:

    antrena

    Original Title

    sirio_827

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides instructions for mounting the SIRIO 827 base antenna. It has a frequency range of 26-29 MHz and comes with telescopic sections that extend to create the antenna mast. The instructions describe inserting sections to create the mast and attaching radials to the base for grounding.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    456 views2 pages

    Sirio 827

    Uploaded by

    10sd156
    The document provides instructions for mounting the SIRIO 827 base antenna. It has a frequency range of 26-29 MHz and comes with telescopic sections that extend to create the antenna mast. The instructions describe inserting sections to create the mast and attaching radials to the base for grounding.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    Final mounting view

    TUNING INSTRUCTION
    SIRIO 827 doesn't need any
    tuning because its large band.
    However a fine modifications is
    available by acting on the final
    whip.

    SIRIO 827

    26 MHz

    28 MHz

    OPTIONAL ANTI-NOISE NYLON RING

    Optional noise nylon ring to reduce the wind noise of the radials.
    Code 2511011.00
    B Copyright SIRIO antenne - Technical Data are subjected to change - Printed in ITALY - Rev. 02/07/2003 - Cod. ID082

    Installation Manual

    DESCRIPTION

    MOUNTING INSTRUCTIONS

    The most modern technology and the most advanced instruments have been used for the
    realization of SIRIO 827, the new base antenna with remarkable characteristics. It is made of
    Silicium Magnesium Aluminium tubes of big dimensions drawn and cemented on the surface to
    get the maximum strenght of the main whip. The coil, made of enamelled copper wire of big
    section, has been specially planned in order to bear high powers. It adopts the exclusive system
    C.A.C.S. (Coil Auto-Cooling System) which allows the auto-cooling by a finned support that keeps
    the coil hanging up allowing the air circulation

    Fig. A:: Insert the tube 8 x 700 mm


    in the top-part of the telescopic whip; let
    it out for 430 mm, lock it by using the
    supplied screw and key and assemble
    the PVC cap on the whip.

    SPECIFICATIONS

    Fig. B:: Unstring the 4 telescopic tubes


    and fix them by using the 6 screws
    supplied.

    Electrical Data
    Type
    Frequency Range
    Impedance
    Radiation (H-plane)
    Polarization
    Gain
    Bandwidth at V.S.W.R. 2:1
    V.S.W.R. at res. freq.
    Max Power
    Feed system / position
    Connector type

    :
    :
    :
    :
    :
    :
    :
    :
    :
    :
    :

    5/8 Ground Plane


    26-29 MHz
    50 Unbalanced
    360 Omnidirectional
    Vertical
    1.5 dBd, 3.65 dBi
    2000 KHz
    1.1 : 1
    1000 Watts
    Transformer DC-ground / base
    UHF-female

    :
    :
    :
    :
    :

    Aluminium, Steel, Copper, Nylon


    6700 mm
    6000 gr
    1400 mm
    35-39 mm

    Fig. C:: Fix the telescopic whip to the


    tube 37 mm by means of the first
    tightening clip 32-35 mm and proceed
    to fix the tube 37 mm to the tube
    44 mm with the second clip 40-43
    mm.

    Mechanical Data
    Materials
    Height (approx.)
    Weight (approx.)
    Radial lenght
    Mounting Mast

    Fig. D:: Assemble the fixing rings as


    shown in the picture and insert the antenna on the mounting mast. Put the
    PVC caps on the radials 8 x 1400 mm
    and fix them with the supplied screws
    and key.

    ID082

    You might also like