College of Physical and Respiratory Therapy S.Y. 2016-2017: Bernardo Tayaban JR., PTRP Maverick Kaypee Colet, PTRP

COLLEGE OF PHYSICAL AND RESPIRATORY THERAPY
S.Y. 2016-2017
SEMINAR 1
MEDICAL BACKGROUND ON
MYOFASCIAL PAIN SYNDROME
SUBMITTED TO:
Bernardo Tayaban Jr., PTRP
Maverick Kaypee Colet, PTRP
SUBMITTED BY:
Andrada, Dune Abraham A.
Agra, Crissa Julienne E.
Anin, Jerna C.
Campos, Bianca Joyce U.
Casil, Gabrielle Pauline C.
Gurtiza, Joanna Eden A.
Ormita, Ricah Mae
I.
Introduction
II.
Definition of Terms
III.
Epidemiology
IV.
Sex
- Commonly seen in women
Age
- 20-50 y/o
Work
- Sedentary jobs and lifestyle than in those who engage in regular physical
activity.
Race
- No racial differences in the incidence of myofascial pain.
Personality
- Typical is that of a worrier who has many real or perceived responsibilies and
who
-
Anatomy, Physiology, Kinesiology
Classification of Joints
Joints are classified by structure and by function.
Structural classification focuses on the material binding the bones together and
whether or not a joint cavity is present.
o Fibrous: immovable
o Cartilaginous: both rigid and slightly movable
o synovial joints: freely movable
Functional classification is based on the amount of movement allowed at the joint.
o synarthroses: which are immovable joints;
o amphiarthroses: slightly movable joints;
o diarthroses: freely movable joints.
Fibrous Joints
The bones are joined by fibrous tissue, namely dense fibrous connective tissue, and no
joint cavity is present.
The amount of movement allowed depends on the length of the connective tissue fibers
uniting the bones.
Most fibrous joints are immovable, although a few are slightly movable.
The three types of fibrous joints are :
o
o
o
Sutures: seams, occur only between bones of the skull

Syndesmoses: the bones are connected exclusively by ligaments, cords or
bands of fibrous tissue.
Gomphoses: is a peg-in-socket fibrous joint
Cartilaginous Joints
the articulating bones are united by cartilage.
they lack a joint cavity and are not highly movable.
The two types of cartilaginous joints are:
o synchondroses : bar or plate of hyaline cartilage unites the bones
o symphyses: A joint where fibrocartilage unites the bone
Synovial Joints
.
are those in which the articulating bones are separated by a fluidcontaining joint cavity.
General Structure
Synovial joints have six distinguishing features
1. Articular cartilage:
Glassy-smooth hyaline cartilage

covers the opposing bone surfaces
as articular cartilage.
These thin (1 mm or less) but

spongy
cushions
absorb
compression placed on the joint and
thereby keep the bone ends from
being crushed.
2. Joint (articular) cavity.
A feature unique to synovial joints,

the joint cavity is really just a
potential space that contains a small
amount of synovial fluid.
3. Articular capsule.
The joint cavity is enclosed by a twolayered articular capsule, or joint
capsule.
The tough external fibrous layer:
is composed of dense irregular connective tissue that is continuous
with the periostea of the articulating bones.
It strengthens the joint so that the bones are not pulled apart.
The inner layer of the joint capsule is a synovial membrane
composed of loose connective tissue.
it covers all internal joint surfaces that are not hyaline cartilage.
The synovial membranes function is to make synovial fluid.
4. Synovial fluid.
A small amount of slippery synovial fluid occupies all free spaces within
the joint capsule.
This fluid is derived largely by filtration from blood flowing through the
capillaries in the synovial membrane.
Synovial fluid has a viscous, egg-white consistency due to hyaluronic acid

secreted by cells in the synovial membrane, but it thins and becomes less
viscous during joint activity.
Synovial fluid, which is also found within the articular cartilages, provides a
slippery, weight-bearing film that reduces friction between the cartilages.
Without this lubricant, rubbing would wear away joint surfaces and
excessive friction could overheat and destroy the joint tissues, essentially
cooking them.
Synovial fluid also contains phagocytic cells that rid the joint cavity of
microbes and cellular debris.
5. Reinforcing ligaments.
Synovial joints are reinforced and strengthened by a number of bandlike
ligaments.
Most often, these are:
capsular ligaments, which are thickened parts of the fibrous layer.
6.
In other cases, they remain distinct and are found outside the
capsule (as extracapsular ligaments) or deep to it (as
intracapsular ligaments
Nerves and blood vessels.
Synovial joints are richly supplied with sensory nerve fibers that innervate
the capsule.
Some of these fibers detect pain, as anyone who has suffered joint injury is
aware, but most monitor joint position and stretch.
Other Structural Features:

Fatty pads
are found in some synovial joints lying between the synovial membrane
and the fibrous capsule or bone. Examples are found in the hip and knee
joints.
articular discs, or menisci
improve the fit between articulating bone ends, making the joint more
stable and minimizing wear and tear on the joint surfaces.
Bursae and Tendon Sheaths
Bursae
are flattened fibrous sacs lined with synovial membrane and containing a
thin film of synovial fluid.
They occur where ligaments, muscles, skin, tendons, or bones rub
together.
tendon sheath
is essentially an elongated bursa that wraps completely around a tendon
subjected to friction, like a bun around a hot dog.
They are common where several tendons are crowded together within
narrow canals (in the wrist region, for example).
Types of Synovial Joints

Plane joints:
In plane joints, the apposed articular surfaces are flat or almost flat, and this
permits the bones to slide on one another.
Examples of these joints are the sternoclavicular and acromioclavicular joints

Hinge joints:
Hinge joints resemble the hinge on a door, so that flexion and extension
movements are possible.
Examples of these joints are the elbow, knee, and ankle joints
Pivot joints:
In pivot joints, a central bony pivot is surrounded by a bonyligamentous ring and
rotation is the only movement possible.
The atlantoaxial and superior radioulnar joints are good examples.
Condyloid joints:
Condyloid joints have two distinct convex surfaces that articulate with two
concave surfaces.
The movements of flexion, extension, abduction, and adduction are possible
together with a small amount of rotation.
The metacarpophalangeal joints or knuckle joints are good examples
Ellipsoid joints:
In ellipsoid joints, an elliptical convex articular surface fits into an elliptical
concave Articular surface.
The movements of flexion, extension, abduction, and adduction can take place,
but rotation is impossible.
The wrist joint is a good example
Saddle joints:
In saddle joints, the articular surfaces are reciprocally concavoconvex and
resemble a saddle on a horses back.
These joints permit flexion, extension, abduction, adduction, and rotation.
The best example of this type of joint is the carpometacarpal joint of the thumb.
Ball-and-socket joints:
In ball-and-socket joints, a ballshaped head of one bone fits into a socketlike
concavity of another.
This arrangement permits free movements, including flexion, extension,
abduction, adduction, medial rotation, lateral rotation, and circumduction.
The shoulder and hip joints are good examples of this type of joint
V.
Etiology
VI.
Pathophysiology/Mechanism of Injury/Pathology
VII.
Clinical Signs and Symptoms/ Physical Disabilities/ Impairments
VIII.
Diagnostic Tools/ Procedures or Test
IX.
Differential Diagnosis Conditions
X.
Managements
XI.
Pharmacological Management
Medical and Surgical Management
Physiotherapeutic management of pain
REFFERENCES

College of Physical and Respiratory Therapy S.Y. 2016-2017: Bernardo Tayaban JR., PTRP Maverick Kaypee Colet, PTRP

Uploaded by

Copyright:

Available Formats

College of Physical and Respiratory Therapy S.Y. 2016-2017: Bernardo Tayaban JR., PTRP Maverick Kaypee Colet, PTRP

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

College of Physical and Respiratory Therapy S.Y. 2016-2017: Bernardo Tayaban JR., PTRP Maverick Kaypee Colet, PTRP

Uploaded by

Copyright:

Available Formats

COLLEGE OF PHYSICAL AND RESPIRATORY THERAPY

Anatomy, Physiology, Kinesiology

Sutures: seams, occur only between bones of the skull

Glassy-smooth hyaline cartilage

These thin (1 mm or less) but

A feature unique to synovial joints,

Synovial fluid has a viscous, egg-white consistency due to hyaluronic acid

Other Structural Features:

Types of Synovial Joints

Examples of these joints are the sternoclavicular and acromioclavicular joints

Clinical Signs and Symptoms/ Physical Disabilities/ Impairments

Diagnostic Tools/ Procedures or Test

Differential Diagnosis Conditions

Medical and Surgical Management

Physiotherapeutic management of pain

You might also like