Phase Sequence Checker For Three Phase Supply - 10000
Phase Sequence Checker For Three Phase Supply - 10000
Phase Sequence Checker For Three Phase Supply - 10000
ABSTRACT
The project is designed to check the sequence of the 3 phase supply. It is very important
to know the phase sequence particularly for 3 phase motors. For example, if the 3 phase motor
is used for pumping action, any phase reversal accidentally resulting in wrong sequence could
force the motor run in the wrong direction. This could result in dry run of the motor to
develop permanent fault.
In this project direct 3-phase AC supply 50Hz is fed through voltage drop arrangement
duly stabilized by zennor diodes to a logic circuit comprising of NAND gates and OR gates to
detect the proper sequence of RYB by series of pulses of fixed duration. In the event of
changing the sequence from RYB to say YBR, the combination of NAND and OR gates
develops an output with a missing pulse during the fixed time duration. This pulse is used in
triggering an input signal to a 8051 series microcontroller through a timer to drive LEDs
placed in a circle. In proper sequence the LEDs run clockwise having received no triggering.
While the sequence is not there the triggering is done which is indicated by LEDs running
clockwise for some time and then anti clockwise for the next and so it continues. DC
requirement of the circuit is powered from a step down transformer along with a bridge
rectifier ,regulators and filter capacitor.
Further this project can be enhanced by providing a relay to circuit to cutoff the supply to
the load
BLOCK DIAGRAM
HARDWARE REQUIREMENTS:
SOFTWARE REQUIREMENTS:
Keil Compiler
language: Embedded C or Assembly.
www.theelectromech.in