CP606 and CF125 Fire Stop System by HilTI

Technical Submittal
Firestop Systems
Project
PMS Viaduct -Qatar
Company
YUKSEL CONSTRUCTION
COMPANY INC
Client
ASTAD
Product
CP 606 Firestop Sealant
CF125-50 Dispenser Foam
Hilti Qatar W.L.L.

P.O. Box 24097 I Doha
T +974 4406 3600 I F + 974 4406 3669 I
Index
1. Company Profile
2. ISO Certificate
3. Catalogue page
4. Technical Data Sheet
5. Material Safety Data Sheet
6. Certificates
7. LEED
8. Civil Defense Approval
9. Relevant Standard System
10. Country of Origin
Company Profile
ISO Certificate
CERTIFICATE
IQNet and SQS
hereby certify that the organisation
Hilti Qatar W.L.L

Doha
Qatar
Whole Company
Sales, Marketing, Repair and Distribution of Hilti Products
has implemented and maintains a
Management System
ISO 9001:2008
Scope No(s): 18
Issued on: 2013-07-01
Validity date: 2016-06-30
Registration Number: CH-39997
Michael Drechsel
President of IQNet
Roland Glauser
CEO SQS
IQNet Partners*:
CATALOGUE PAGE
Firestop and Fire Protection Systems
Flexible firestop sealant CP 606
Applications
Sealing rigid or low-movement ceiling/wall joints, widths from 6

to 30 mm
Sealing cable tray penetrations
Sealing metal pipe penetrations
For use in various base materials such as masonry, concrete,
drywall and metal
Advantages
Good adherence without primer

Smoke, fume and water resistant
Paintable
Easy clean up with water
Tested for 500 cycles with up to 33% movement in accordance
with UL 2079 and ASTM E1966
Technical data
Chemical basis
Water-based acrylic dispersion
Shelf life
24 Months
Approx. curing time2)
3 mm/3 days
Base materials
Concrete, Masonry, Drywall, Steel
Application temperature range
5 - 40 C
LEED VOC
75 g/l
1)
at 77F/25C and 50% relative humidity; from date of manufacture

2)
at 75F/24C, 50% relative humidity
1)
Ordering designation
Content per can/cartridge
CP 606 310ml white
310 ml
CP 606 580ml white
580 ml
CP 606 310ml INT grey

CP 606 5GAL white
422
310 ml
19000 ml
Sales pack
quantity
Item number
1 pc
209625
1 pc
209632
1 pc
1 pc
209630
209637
www.hilti.com
Construction chemicals
Dispenser foam CF125-50
Applications
Insulating gaps around window frames, cooling equipment

and pipes, heating pipes, baths, wood floors, air-conditioning
equipment, air ducts
Advantages
High yield
Stop-and-go controlled dispensing
Economical in use
Ordering designation
CF 125-50 750ML
446
Technical data
Application temperature range
5 - 30 C
Colour
Manila
Foam yield (up to)
50 l
Shelf life1)
12 Months
1)
at 77F/25C and 50% relative humidity; from date of manufacture
Sales pack
quantity
1 pc
Item number
259628
www.hilti.com
Technical Data Sheet
Product Information
Product Information
CP 606
Fire resistant joint filler
Product description
An acrylic based firestop mastic that offers movement
capabilities and excellent acoustic rating in fire rated joint
applications. Provides up to 4hrs integrity in various
applications when tested to BS476 Part 20.
Areas of application
Sealing header joints
Sealing drywall partition connections
Sealing joints to CP670 firestop safety board
Metal pipes
Rigid and low movement joints
Tested on metal pipes in walls, floors and drywall.
Product features
System advantages/customer benefits
Silicone free
Halogen and solvent free
UV resistant
Paintable
Simple use and application
Smoke, gas and water tight
Easy clean up with water
Approved for infinite linear gap lengths
Base materials
Concrete, Masonry, Drywall
Steel, Porous concrete
(Wall and floor thickness from 100mm)
(Joint widths from 6-100mm)
Meets LEEDTM requirements for indoor

environmental quality credit
Approvals Internationally tested and approved
British Standard
BS 476
Other tests include : UL 2079 : ASTM E 1399 : UL 1479 : ASTM E 814 : ASTM E 84
Recommendations
Can be used in conjunction with a suitable backing material:
Non flammable mineral wool (min. 100kg/m per BS).
3
Hilti CF125-50 fire rated backing foam for construction
joints only*
*Please note fire rating will be reduced.
Installation instructions for CP 606

QFSNBOFOUMZNBSLFEXJUIBOJEFOUJGJDBUJPOQMBUFBOE
GBTUFOFEJOBWJTJCMFQPTJUJPOOFYUUPUIFTFBM
Notice
*OTUSVDUJPOTCFMPXBSFHFOFSBMHVJEFMJOFTBMXBZT
SFGFSUPUIFBQQMJDBCMFESBXJOHJOUIF6-'JSF
3FTJTUBODF%JSFDUPSZPS)JMUJ'JSFTUPQ4ZTUFNT(VJEF
GPSDPNQMFUFJOTUBMMBUJPOJOGPSNBUJPO
5IFVTFPGCBDLJOHNBUFSJBMJTSFDPNNFOEFEUP
DPOUSPMUIFTFBMBOUEFQUIBOEIFMQFOTVSFBTTFNCMZ
TFBMJTDPNQMFUF
Opening
$MFBOUIFPQFOJOH4VSGBDFTUPXIJDI$1XJMM
CFBQQMJFETIPVMECFDMFBOFEPGMPPTFEFCSJT EJSU
PJM XBYBOEHSFBTF5IFTVSGBDFTIPVMECFNPJTUVSF
BOEGSPTUGSFF
Not for use

0OBSFBTJNNFSTFEJOXBUFS
Storage
4UPSFPOMZJOUIFPSJHJOBMQBDLBHJOHJOBMPDBUJPO
QSPUFDUFEGSPNNPJTUVSFBUBUFNQFSBUVSFPGp'UP
p' p$UPp$
0CTFSWFFYQJSBUJPOEBUFPOQBDLBHF
JOINT
#FGPSFIBOEMJOH SFBE.BUFSJBM4BGFUZ%BUB4IFFUBOE
QSPEVDUMBCFMGPSTBGFVTBHFBOEIFBMUIJOGPSNBUJPO
$MFBOPQFOJOH
Firestop
System
*OTFSUCBDLJOH
NBUFSJBMDPNQSFTTFE
QFS6-4ZTUFN
"QQMZ$1
4NPPUI$1
'BTUFOJEFOUJDBUJPO
QMBUF JGSFRVJSFE
*OTFSUGJMMPGNJOFSBMXPPMPSCBDLFS BTSFRVJSFE

"QQMZGJSFTUPQPWFSCBDLFS
4NPPUIGJSFTUPQTFBMBOUXJUIBUSPXFMCFGPSFUIFTLJO
GPSNT0ODFDVSFE $1DBOPOMZCFSFNPWFE
NFDIBOJDBMMZ
'PSNBJOUFOBODFSFBTPOT BQFOFUSBUJPOTFBMDBOCF
DUCT
Application of firestop
Firestop
System
$MFBOPQFOJOH
*OTFSUCBDLJOH
NBUFSJBM
"QQMZ$1
4NPPUI$1
'BTUFOJEFOUJDBUJPO
QMBUF JGSFRVJSFE
Product Information
CP 606
Fire resistant joint ller
Technical Data
CP 606
Density
1.58 g/cm
Application Temperature
Range
5C - 40C
Skin forming time (at

23C/50% r.H)
Cure Time (at 23C/50% r.H)
Volume shrinkage
Movement
Temperature resistance tem perature range
Shelf life (@73F/23C and 50%
relative humidity)
Chemical basis
15 min
approx. 3 mm/ 3 days
<20 %
10 %
-30C - 100C
24 months
Acrylic
Application
Joint sides must be sound, dry and free from dust, oil or grease.
Check whether a primer is required for adhesion to the substrate.
In walls apply CP 606 to both sides of the joint.
Insert backll of non-ammable mineral wool (at least
100 kg/m3 + melting point > 1000OC), Hilti CF 125-50 foam or
PE backing rod.
Smooth restop sealant with water before the skin forms.
Remove CP 606 restop sealant before it cures using water
Once cured, it can only be removed mechanically.
Joint side material/primer recommendations

To improve adhesion of restop sealant if the substrate is porous
and absorptive, mix CP 606 with water and apply as a primer on
base material.
The compatibility of the sealant with any encountered paints must
always be checked. In particular, this concerns dispersion paint
systems and alkyd resin systems that can be diluted in water.
Checks of compatibility must be repeated at reasonable intervals
because the chemical composition of paint systems may change.
Chemical resistance
Normally, there is no need for resistance to chemicals with the
applications recommended by Hilti.
Unprotected acrylic sealants have only slight resistance to chemicals.
Please contact the Technical Advisory Service or your local Fire
Protection Specialist or the nearest Hilti center if special
requirements for chemical resistance have to be met.
Safety precautions
Please refer to MSDS data sheet available as a download from the
Technical Library on the Hilti web site at
Dimensions
The following dimensions must be observed when using CP 606
re resistant joint ller.
b
b
Floor
Wall
Consumption guide
Consumption guide values are given as joint length in meters
per cartridge.
b = Joint depth
6 mm
10 mm
15 mm
6
8.6
a = Joint width (mm)

10
20
5.2
1.6
30
0.7
Backlling per BS
Max. joint Base material Backlling
width
6 mm
15 mm
20 mm
20 mm
30 mm
30 mm
65mm
Gas concrete
Gas concrete
Gas concrete
Gas concrete
Gas concrete
Steel-steel
Dry wall/
concrete
(Top of wall)
Fire rating per BS476

Warres N 69754/G
Insulation Integrity
Mineral wool
4H
4H
Mineral wool
4H
4H
PE 24 mm
130 min. 4 H
PU foam CF 125-50 208 min. 4 H
Mineral wool
216 min. 4 H
Mineral wool
36 min.
4H
Mineral wool
136 min.
136 min
Hilti. Outperform. Outlast.
Product Information
CF125-50
Dispenser foam
Product description
CF 125-50 dispenser backing foam is a one component
ready-to-use polyurethane system, to be used in conjunction
with restop sealants and intumescent sealants.
Areas of application
Insulating and sealing doors and windows in re rated
building elements.
Backlling around service penetrations prior to being
used as backing material for CP 601S, CP 606 and
CP 611A Passive Fire Resistance sealants and mastics.
Tested in accordance with the criteria laid down in
BS476 Part 20.
System advantages/customer benets
Product features
Simple and ready-to-use 1 component polyurethane foam

system
Gun applied meaning minimal wastage
Ozone friendly propellant that meets the 1987 Montreal
Agreement
Moisture cured
Economical due to high foam yield and ability to regulate
dispenser
Insulating, lling and adhesive properties
Excellent adhesion
Moisture cured
Ozone friendly propellant
Base materials
Concrete, Masonry, Timber, Brickwork
(Walls and oors > 100mm)
Approvals Internationally tested and approved
British Standard
BS 476
Curing characteristics
Note Hardening characteristics are temperature and
Storage
humidity dependant.
non-tacky:
10-20 minutes
ready-to-cut pack:
20-40 minutes
ready to restop: approx 30 minutes
Store in original packaging in a location protected from

frost, moisture, sunlight and at a temperature of 5 OC to
25OC.
Do not allow canister to exceed 50OC.
Observe expiry date on bottom of cans.
Recommendations
Joint sides are to be sound, free from dust, oil or grease.
Base materials must be moistened with water to aid
adhesion and curing.
Deep cavities to be lled in successive layers. Ensure
top surface of the preceding layer is sufciently nontacky before applying the next layer. Spray individual
layers with water.
Remove spillage with CF-R1 cleaner before foam cures.
Once cured remove mechanically.
Base material and ambient temperature to be 5OC
minimum.
CF 125-50 Dispenser foam

Description
Ordering
designation
Item no.
Fire rated foam
CF 125-50
259628
Foam cleaner/solvent
CF R-1
55019
Dispenser
CF DS1
259768
60
Installation Instructions
CF125-50
Dispenser foam
Technical Data
CF 125-50
Density
Application temperature - max
Application temperature - min
~17 kg/m
30 C
5 C
Content per can/cartridge
750 ml
Max. storage temperature
25 C
Min. storage temperature

Shelf life (@73F/23C and 50%
relative humidity)
Tested to
BS 476 Part 20
Limitation:
Not to use on areas
exposed to weathering
and UV radiation.
Not to use on its own
around service
penetrations.
5 C
12 months
Sound insulation of
joints:
i.f.t.-tested on the basis of
the standard DIN 52210
Test report 169 16987
of 01. 03. 1996
CF125-50 Dispenser foam

Application Details
Read and follow all instructions/warnings on can label.
The base material must be wet to enable optimal foam
output volume and to prevent subsequent swelling.
Shake can of CF 125-50 foam thoroughly before use
(minimum of 20 seconds).
Remove the protective cap from the can.
The CF 125-50 Foam container can now be screwed
onto the CF DS1 dispenser.
The foam can now be used adjusting the ow rate by
means of the ow adjustment screw at the rear of the
dispenser.
When the work with the CF 125-50 foam system is

complete, close the trigger lock. A foam can must be
attached to the dispenser at all times.
The surface of the base material must be free of dust
and grease.
To ll deep cavities apply foam in successive layers.
Ensure the top surface of the preceding layer is
sufciently non-tacky before applying the next layer.
When applying foam in layers, spray the individual layers
with water.
The foam will not blend to teon, silicone or form work
release agent.
Overlaying with Fire Resistant Sealants/Mastics

After 20-40 minutes, once a skin has formed, gently
push back foam to required depth.
Alternatively, wait until full cure and rake out or cut back
foam to required depth.
Safety precautions
Please refer to MSDS data sheet available as a download
from the Technical Library on the Hilti web site at
www.hilti.co.uk / www.us.hilti.com
The above applications are not exhaustive.
For further details please contact your local Hilti representative
61
MSDS
40.2.7
Page 1/5
Safety Data Sheet

acc. to ISO 11014
Printing date 05/18/2015
*
Version number 3
Reviewed on 05/18/2015
1 Identification
Product identifier
Trade name:
Hilti Firestop Acrylic Sealant CFS-S ACR
CP 606
Relevant identified uses of the substance or mixture and uses advised against
Sector of Use SU19 Building and construction work
Application of the substance / the mixture Construction chemicals
Details of the supplier of the safety data sheet
Manufacturer/Supplier:
Hilti, Inc.
5400 South 122nd East Ave.
US-Tulsa, OK 74146
Phone: (800) 879-8000
Fax: (800) 879-7000
Espaol: (800) 879-5000
Information department:
chemicals.hse@hilti.com
see section 16
Emergency telephone number:
Tox Info Suisse - 24 h Service
Tel.: 0041 / 44 251 51 51 (international)
.
Chem-Trec
Tel.: 1 800 424 9300
2 Hazard(s) identification
Classification of the substance or mixture The product is not classified according to the Globally Harmonized System (GHS).
Classification according to Directive 67/548/EEC or Directive 1999/45/EC not applicable
Classification system:
The classification was made according to the latest editions of the EU-lists, and expanded upon from company and literature data.
Label elements
GHS label elements Void
Hazard pictograms Void
Signal word Void
Hazard statements Void
Classification system
NFPA ratings (scale 0-4)
Health = 0
Fire = 0
Reactivity = 0
Other hazards
Results of PBT and vPvB assessment
PBT: Not applicable.
vPvB: Not applicable.
3 Composition/information on ingredients
Chemical characterization: Mixtures
Description: Acrylat-dispersion
Dangerous components:
57-55-6 propane-1,2-diol
Additional information For the wording of the listed risk phrases refer to section 16.
<2.5%
4 First-aid measures
Description of first aid measures
General information No special measures required.
After inhalation Take affected persons into fresh air and keep quiet.
After skin contact Immediately wash with water and soap and rinse thoroughly.
After eye contact Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
After swallowing Seek immediate medical advice.
Information for doctor
Most important symptoms and effects, both acute and delayed No further relevant information available.
Indication of any immediate medical attention and special treatment needed No further relevant information available.
US
(Contd. on page 2)
40.2.7
Page 2/5
Safety Data Sheet

acc. to ISO 11014
Version number 3
(Contd. of page 1)
5 Fire-fighting measures
Extinguishing media
Suitable extinguishing agents CO2, extinguishing powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
Special hazards arising from the substance or mixture
In case of fire, the following can be released:
Carbon monoxide (CO)
Carbondioxide (CO2)
Advice for firefighters
Protective equipment: Ensure adequate ventilation
6 Accidental release measures

Personal precautions, protective equipment and emergency procedures
Wear protective clothing.
Ensure adequate ventilation
Particular danger of slipping on leaked/spilled product.
Environmental precautions: No special measures required.
Methods and material for containment and cleaning up:
Pick up mechanically.
Dispose contaminated material as waste according to item 13.
Reference to other sections
See Section 7 for information on safe handling
See Section 8 for information on personal protection equipment.
See Section 13 for disposal information.
7 Handling and storage

Handling
Precautions for safe handling Ensure good ventilation/exhaustion at the workplace.
Information about protection against explosions and fires: No special measures required.
Conditions for safe storage, including any incompatibilities
Storage
Requirements to be met by storerooms and receptacles: keep containers securely closed and dry, store at 5 - 25 C / 41 - 77 F
Information about storage in one common storage facility: Not required.
Further information about storage conditions: None.
Storage class 11
Specific end use(s) No further relevant information available.
8 Exposure controls/personal protection

Control parameters
Components with limit values that require monitoring at the workplace:
57-55-6 propane-1,2-diol
WEEL Long-term value: 10 mg/m
Additional information: The lists that were valid during the creation were used as basis.
Exposure controls
Personal protective equipment
General protective and hygienic measures
The usual precautionary measures for handling chemicals should be followed.
Avoid contact with the eyes and skin.
Keep away from foodstuffs, beverages and feed.
Wash hands before breaks and at the end of work.
Breathing equipment: Not necessary if room is well-ventilated.
Protection of hands:
Protective gloves.
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation
EN 374
Material of gloves
Nitrile rubber, NBR
The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to
manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has
therefore to be checked prior to the application.
Penetration time of glove material
The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed.
(Contd. on page 3)
US
40.2.7
Page 3/5
Safety Data Sheet

acc. to ISO 11014
Version number 3
(Contd. of page 2)
Eye protection:
Tightly sealed goggles.
EN 166 + EN 170
Body protection:
Protective work clothing.
9 Physical and chemical properties

Information on basic physical and chemical properties
General Information
Appearance:
Pasty
Form:
According to product specification
Color:
Odor:
Characteristic
Odour threshold:
Not determined.
pH-value:
Not applicable.
Change in condition
Melting point/Melting range:
Boiling point/Boiling range:
Not determined.
undetermined
Flash point:
Not applicable
Flammability (solid, gaseous)
Not determined.
Ignition temperature:
Decomposition temperature:
Not determined.
Auto igniting:
Product is not selfigniting.
Danger of explosion:
Product does not present an explosion hazard.
Explosion limits:
Lower:
Upper:
Not determined.
Not determined.
Vapor pressure:
Not determined.
Density at 20 C (68 F):

Relative density
Vapour density
Evaporation rate
1.55 g/cm (12.935 lbs/gal) (DIN 51757)

Not determined.
Not applicable.
Not applicable.
Solubility in / Miscibility with

Water:
Not miscible or difficult to mix
Partition coefficient (n-octanol/water): Not determined.

Viscosity:
dynamic:
kinematic:
Other information
Not applicable.
Not applicable.
VOC Content: 71 g/l (EPA Method 24)
10 Stability and reactivity

Reactivity
Chemical stability
Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications.
Possibility of hazardous reactions No dangerous reactions known
Conditions to avoid No further relevant information available.
Incompatible materials: No further relevant information available.
Hazardous decomposition products: No dangerous decomposition products known
11 Toxicological information
Information on toxicological effects
Acute toxicity:
Primary irritant effect:
on the skin: No irritant effect.
on the eye: No irritating effect.
(Contd. on page 4)
US
40.2.7
Page 4/5
Safety Data Sheet

acc. to ISO 11014
Version number 3
(Contd. of page 3)
Sensitization: No sensitizing effects known.
Additional toxicological information:
When used and handled according to specifications, the product does not have any harmful effects according to our experience and the
information provided to us.
IARC (International Agency for Research on Cancer)
None of the ingredients is listed.
NTP (National Toxicology Program)
None of the ingredients is listed
OSHA-Ca (Occupational Safety & Health Administration)
12 Ecological information
Toxicity
Aquatic toxicity: No further relevant information available.
Persistence and degradability No further relevant information available.
Behavior in environmental systems:
Bioaccumulative potential No further relevant information available.
Mobility in soil No further relevant information available.
Additional ecological information:
General notes: Do not allow undiluted product or large quantities of it to reach ground water, water course or sewage system.
Results of PBT and vPvB assessment
PBT: Not applicable.
vPvB: Not applicable.
Other adverse effects No further relevant information available.
13 Disposal considerations
Waste treatment methods
Recommendation
For disposal, local regulations issued by the authorities must be observed.
Smaller quantities can be disposed of with household waste.
European waste catalogue:
08 04 10 waste adhesives and sealants other than those mentioned in 08 04 09
Uncleaned packagings:
Recommendation:
Disposal must be made according to official regulations.
Dispose of packaging according to regulations on the disposal of packagings.
14 Transport information
UN-Number
DOT, ADR, ADN, IMDG, IATA
Void
UN proper shipping name

Void
Transport hazard class(es)

Class
Void
Packing group
DOT, ADR, IMDG, IATA
Void
Environmental hazards:
Marine pollutant:
No
Special precautions for user
Not applicable.
Transport in bulk according to Annex II of MARPOL73/78 and

Not applicable.
the IBC Code
UN "Model Regulation":
15 Regulatory information
Safety, health and environmental regulations/legislation specific for the substance or mixture
Sara
Section 355 (Extremely hazardous substances):
Section 313 (Specific toxic chemical listings):
None of the ingredients are listed.
(Contd. on page 5)
US
40.2.7
Page 5/5
Safety Data Sheet

acc. to ISO 11014
Version number 3
(Contd. of page 4)
TSCA (Toxic Substances Control Act):

All ingredients are listed.
Proposition 65:
Chemicals known to cause cancer:
None of the ingredients are listed.
Cancerogenity categories
EPA (Environmental Protection Agency)
TLV (Threshold Limit Value established by ACGIH)
MAK (German Maximum Workplace Concentration)
NIOSH-Ca (National Institute for Occupational Safety and Health)
Chemical safety assessment: not required.
16 Other information
This information is based on our present knowledge. However, this shall not constitute a guarantee for any specific product features and shall
not establish a legally valid contractual relationship.
Department issuing SDS:
Hilti Corporation
Business Unit Chemicals
Quality/Safety/Environment
FL-9494 Schaan / Liechtenstein
chemicals.hse@hilti.com
Tel.: +423 234 3004
FAX.: +423 234 3462
Date of preparation / last revision 05/18/2015 / 2
Abbreviations and acronyms:
ADR: Accord europen sur le transport des marchandises dangereuses par Route (European Agreement concerning the International Carriage of Dangerous Goods by Road)
IMDG: International Maritime Code for Dangerous Goods
DOT: US Department of Transportation
IATA: International Air Transport Association
ACGIH: American Conference of Governmental Industrial Hygienists
EINECS: European Inventory of Existing Commercial Chemical Substances
ELINCS: European List of Notified Chemical Substances
CAS: Chemical Abstracts Service (division of the American Chemical Society)
NFPA: National Fire Protection Association (USA)
* Data compared to the previous version altered.

US
DR
Page 1/5
Material Safety Data Sheet

According to 91/155 EEC
Printing date 04.11.2005
*
Reviewed on 04.11.2005
1 Identification of substance:
Product details:
Trade name: CF 125-5W50; CF 125-50; CF 126N
Application of the substance / the preparation Construction chemicals
Manufacturer/Supplier:
Hilti AG
Feldkircherstr. 100
Postfach 333
FL-9494 Schaan Liechtenstein
Tel: +423 234 2111
Fax: +423 234 2965
Informing department: see section 16
Emergency information:
Tel.: 00423 / 234 - 2111
Fax.: 00423 / 234 - 2965
Schweizerisches Toxikologisches Informationszentrum - 24 h Service
Tel.: 0041 / 1 251 51 51 (international)
2 Composition/Data on components:
Chemical characterization
Description: Urethane prepolymer with propellant liquified under pressure, containing no CFC
Dangerous components:
CAS: 13674-84-5
Tris(1-chloro-2-propyl)phosphate
EINECS: 237-158-7
CAS: 101-68-8
diphenylmethane-4,4'-di-isocyanante
EINECS: 202-966-0
CAS: 115-10-6
dimethyl ether
EINECS: 204-065-8
CAS: 106-97-8
butane, pure
EINECS: 203-448-7
Additional information For the wording of the listed risk phrases refer to section 16.
Xn; R 22
10-25%
Xn; R 20-36/37/38-42/43 2,5-10%

F+; R 12
2,5-10%
F+; R 12
2,5-10%
3 Hazards identification
Hazard designation:
Xn Harmful
F+ Extremely flammable
Information pertaining to particular dangers for man and environment
R 12
Extremely flammable.
R 36/37/38 Irritating to eyes, respiratory system and skin.
R 42/43
May cause sensitisation by inhalation and skin contact.
Contains isocyanates. See information supplied by the manufacturer
Pressurized container: protect from sunlight and do not expose to temperatures exceeding 50C. Do not pierce or burn, even after use.
Do not spray on a naked flame or any incandescent material. Keep away from sources of ignition - No smoking.
Keep out of the reach of children
Classification system
The classification is in line with current EC lists. It has been expanded, however, by information from technical literature, by information furnished
by suppliers and by national regulations which have to be observed in chapter 15.
4 First aid measures

After inhalation Supply fresh air; consult doctor in case of symptoms.
After skin contact
Treat affected skin portions with cotton wool or cellulose. Then wash and rinse thoroughly with water and a mild cleaning agent.
After eye contact Rinse opened eye for several minutes under running water. Then consult doctor.
After swallowing Do not induce vomiting; instantly call for medical help.
Information for doctor
The following symptoms may occur: Allergic reactions
5 Fire fighting measures

Suitable extinguishing agents CO2, extinguishing powder or water jet. Fight larger fires with water jet or alcohol-resistant foam.
For safety reasons unsuitable extinguishing agents Water with a full water jet.
Special hazards caused by the material, its products of combustion or resulting gases:
Can be released in case of fire
Carbon monoxide (CO)
Hydrogen chloride (HCl)
(Contd. on page 2)
FLE
DR
Page 2/5

Trade name: CF
125-5W50; CF 125-50; CF 126N

(Contd. of page 1)
Hydrogen fluoride (HF)

Hydrogen cyanide (HCN)
Protective equipment: Wear self-contained breathing apparatus.
Additional information Cool endangered containers with water spray jet.
6 Accidental release measures

Person-related safety precautions:
Ensure adequate ventilation
Wear protective clothing.
Measures for environmental protection: Do not allow product to reach sewage system or water bodies.
Measures for cleaning/collecting:
Allow to solidify. Collect mechanically.
Dispose of contaminated material as waste according to item 13.
7 Handling and storage

Handling
Information for safe handling:
Ensure good ventilation/exhaustion at the workplace.
Ensure good interior ventilation, especially at floor level. (Fumes are heavier than air).
Keep away from heat and direct sunlight.
Danger of bursting!
Information about protection against explosions and fires:
Beware: Container is pressurized. Keep away from direct sun exposure and temperatures over 50C. Do not open by force or throw into fire even
after use.
Do not spray on flames or red-hot objects.
Keep ignition sources away - Do not smoke.
Storage
Requirements to be met by storerooms and containers:
Keep containers securely closed and dry, store at 5 - 25C.
Observe official regulations on storing packagings with pressurized containers.
Information about storage in one common storage facility:
Store away from foodstuffs.
Store away from flammable substances.
Further information about storage conditions: Protect from heat and direct sunlight.
Storage class As per VCI (1991) storage classification concept.
8 Exposure controls and personal protection

Additional information about design of technical systems: No further data; see item 7.
Components with limit values that require monitoring at the workplace:
115-10-6 dimethyl ether (2,5-10%)
TLV (European Union) 1920 mg/m, 1000 ppm
Additional information: The lists that were valid during the compilation were used as basis.
Personal protective equipment
General protective and hygienic measures
Do not eat, drink or smoke while working.
Keep away from foodstuffs, beverages and food.
Wash hands during breaks and at the end of the work.
Avoid contact with the eyes and skin.
Breathing equipment: Use breathing protection in case of insufficient ventilation.
Protection of hands: Protective gloves.
Material of gloves Synthetic gloves
Penetration time of glove material
The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be observed.
Eye protection: Tightly sealed safety glasses.
Body protection: Protective work clothing.
9 Physical and chemical properties:

General Information
Form:
Colour:
Odour:
Container under gas pressure

Light yellow
Characteristic
Change in condition
Melting point/Melting range: Not determined
Boiling point/Boiling range: Not applicable
(Contd. on page 3)
FLE
DR
Page 3/5

Trade name: CF
125-5W50; CF 125-50; CF 126N

(Contd. of page 2)
Flash point:
Not applicable, as aerosol
Ignition temperature:
230C
Decomposition temperature:
100C
Self-inflammability:
Product is not selfigniting.
Danger of explosion:
In use, may form flammable/explosive vapour-air mixture.
Critical values for explosion:

Lower:
Upper:
1,5 Vol %
18,6 Vol %
Vapour pressure at 20C:
5,5-6 bar
Density at 20C
0,9-1,1 g/cm3
Solubility in / Miscibility with

Unsoluble
Water:
10 Stability and reactivity

Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications.
Dangerous reactions
Reacts with alcohols, amines, aqueous acids and alkalis
With water (moisture): CO2 is produced; pressure may build up inside closed containers (danger of bursting)
Dangerous products of decomposition: none, if stored and handled correctly.
11 Toxicological information
Acute toxicity:
LD/LC50 values that are relevant for classification:
13674-84-5 Tris(1-chloro-2-propyl)phosphate
Oral
LD50
3600 mg/kg (ratte)
106-97-8 butane, pure
Inhalative LC50/4 h 658 mg/l (ratte)
115-10-6 dimethyl ether
Inhalative LC50/4 h 308 mg/l (ratte)
9016-87-9 diphenylmethanediisocyanate,isomeres and homologues
Oral
LD50
>5000 mg/kg (ratte)
Inhalative LC50/4 h 0,49 mg/l (ratte)
Primary irritant effect:
on the skin: Irritant to skin and mucous membranes.
on the eye: Irritant effect.
Sensitization:
Sensitization possible by inhalation.
Sensitization possible by skin contact.
Hypersensitve persons may react at very low concentrations of isocyanate.
Additional toxicological information:
The product shows the following dangers according to the calculation method of the General EC Classification Guidelines for Preparations as
issued in the latest version:
Harmful
12 Ecological information:
General notes:
The product reacts with water releasing CO2, to form a solid, insoluble polycarbamide with a high melting point which, according to present
knowledge, is inert and not degradeable.
Do not allow undiluted product or large quantities of it to reach ground water, water bodies or sewage system.
Water hazard class 1 (German Regulation) (Self-assessment): slightly hazardous for water.
13 Disposal considerations
Product:
Recommendation For disposal, local regulations issued by the authorities must be observed.
European waste catalogue
08 00 00 WASTES FROM THE MANUFACTURE, FORMULATION, SUPPLY AND USE (MFSU) OF COATINGS (PAINTS, VARNISHES
AND VITREOUS ENAMELS), ADHESIVES, SEALANTS AND PRINTING INKS
08 05 00 wastes not otherwise specified in 08
08 05 01 waste isocyanates
(Contd. on page 4)
FLE
DR
Page 4/5

Trade name: CF
125-5W50; CF 125-50; CF 126N

(Contd. of page 3)
Uncleaned packagings:
Recommendation: Disposal must be made according to official regulations.
14 Transport information
Land transport ADR/RID (cross-border)
ADR/RID-GGVS/E Class: 2 Gases.
UN-Number:
1950
Designation of goods:
Pressurised container
1950 AEROSOLS
Limited quantity: LQ 2
Remarks:
Maritime transport IMDG:

IMDG Class:
2.1
UN Number:
1950
Packaging group:
II
EMS Number:
F-D,S-U
Marine pollutant:
No
Correct technical name: AEROSOLS
Air transport ICAO-TI and IATA-DGR:
ICAO/IATA Class:
2.1
UN/ID Number:
1950
Correct technical name: AEROSOLS
Transport/Additional information: Limited quantity: LQ 2
15 Regulatory information
Designation according to EC guidelines:
The product has been classified and labelled in accordance with EC Directives / Ordinance on Hazardous Materials (GefStoffV)
Code letter and hazard designation of product:
Xn Harmful
F+ Extremely flammable
Hazard-determining components of labelling:

diphenylmethane-4,4'-di-isocyanante
Risk phrases:
12
36/37/38 Irritating to eyes, respiratory system and skin.
42/43
Safety phrases:
2
Keep out of the reach of children.
23
Do not breathe aerosol.
25
Avoid contact with eyes.
36/37/39 Wear suitable protective clothing, gloves and eye/face protection.
45
In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible).
51
Use only in well-ventilated areas.
Special designation of certain preparations:
Contains isocyanates. See information supplied by the manufacturer
Pressurized container: protect from sunlight and do not expose to temperatures exceeding 50C. Do not pierce or burn, even after use.
Do not spray on a naked flame or any incandescent material. Keep away from sources of ignition - No smoking.
Keep out of the reach of children
National regulations
Technical instructions (air):
Class Share in %
I
NK
2,5-10
10-25
Water hazard class: Water hazard class 1 (Self-assessment): slightly hazardous for water.
16 Other information:
These data are based on our present knowledge. However, they shall not constitute a guarantee for any specific product features and shall not
establish a legally valid contractual relationship.
Changes made since last issue dated 23-10-2004 at the following points: *
(Contd. on page 5)
FLE
DR
Page 5/5

Trade name: CF
125-5W50; CF 125-50; CF 126N

(Contd. of page 4)
Relevent R-phrases
12
20
Harmful by inhalation.
22
Harmful if swallowed.
36/37/38 Irritating to eyes, respiratory system and skin.
42/43
Department issuing data specification sheet:
Hilti Corp.
BU Chemicals
Quality/Safety/Environment
Hilti Entwicklungsgesellschaft mbH
Hiltistrasse 26
D-86916 Kaufering
Tel: +49 8191 90 6494
Fax: +49 8191 90 17 6494
Contact: Michael Kaindl
* Data compared to the previous version altered.
FLE
CERTIFICATES
Approval Granted: Various
Richard P. Ferron, P.E.

Group Manager, Asst. Vice President
FM Approvals
1151 Boston-Providence Turnpike
Norwood, MA 0206
For more than 160 years FM Approvals has partnered with business and industry
to reduce property losses.
Said Approval is subject to satisfactory field performance, continuing follow-up Facilities and Procedures Audits, and strict
conformity to the constructions as shown in the Approval Guide, an online resource of FM Approvals.
Approval Identification: Various
FM Approvals Class: 4990
Hilti, Inc
5400 S 122nd East Avenue
Tulsa, OK 74146
Prepared for:
CP601S; CP604; CP606; CP611A; CP612; CP617; CP618; CP642

CP643; CP643N; CP648E; CP648S; CP653; CP657; CP658T
CP672; CP675T; CP 680-M; CP 680-P; CP682
FS-ONE; FS635, FS657
CFS-S ACR; CFS-S SIL; CFS-IS; CFS-IS P; CFS-C; CFS-W (EL & SG)
CFS-SL; CFS-CT; CFS-M; CFS-DID; CFS-CID; CFS-SP WB
CFS-P PA; CFS-P ST; CFS-F SOL; CFS-PL; CFS-BL
This certificate is issued for the following:
Certificate of Compliance
LEED
February 26, 2010

To Whom It May Concern:
Re: Hilti CP 606 Flexible Firestop LEEDs Info.
The Hilti CP 606 Flexible Firestop Sealant is manufactured in Germany.
The CP 606 pail is made of polyethylene and can be completely recycled. There is no postconsumer or post-industrial content in CP 606 and it cannot be recycled. The CP 606 does not
contain any Rapidly Renewable Materials. The VOC content for CP 606 is 71.0 grams/liter.
CP 606 is not regulated as a hazardous waste by the Federal EPA Standards. The regulations for
the disposal of non-regulated industrial waste can vary from state to state and even city to city.
For this reason, you should consult your local and state regulatory agencies for direction on
disposal.
Please feel free to contact me at (918) 872-3704 if you have questions.
Sincerely,
Jerry Metcalf MPH, CHMM

Safety/Environmental Manager
Hilti Inc.
918 872 3704
jerry.metcalf@hilti.com
Rev. Date: 2/26/10
Hilti, Inc.
5400 South 122 n d East Avenue
Tulsa, OK 74146
1-800-879-8000
www.hilti.com
CIVIL DEFENSE
APPROVAL
Relevant Standard System
Hilti Emirates LLC

DIP - Dubai
Engineering Department
FIRE PREVENTION SYSTEM
Firestop seals according to:
WFRC Assessment Report No. 141323
F-Rating (hr):
Basic test evidence:
BS 476, part 20:1987 / prEN 1366-4
T-Rating (hr):
FIRESTOP DETAIL:
1 Concrete wall assembly min. 165 mm thickness (2 HRS FIRE RATING)

2 Steel door frame assembly (2 HRS FIRE RATING)
3 Hilti Cp 606 Fire Resistant Acoustic Mastic min. 15 mm thickness
4 Hilti CF-125-50 Fire Rated Backing Foam recessed to accommodate sealant
Max. joint width = 30 mm
SAVING LIVES & ASSETS THROUGH INNOVATION & EDUCATION
Country of Origin
October 12, 2012 (Submitted Via Email)

Ministry of Interior
Civil Defense Department
UAE
Our Reference:
Hilti Construction Chemicals,

Div of Hilti Inc.
Files R13240 and R15431
Subject:
Products Under UL Classification and Follow-Up

Service
Sir:
This Letter is being written at the request of Dr. Wolfgang Lewandowski
of Hilti, Kaufering Germany.
This will confirm that the following Hilti products are presently
covered under UL Classification and Follow-Up Service and are inspected
regularly by UL field representatives at the place of manufacturer:
Product Description
CP 643N Series and CP 644 Series Firestop Devices
Country of origin
Romania
CP 653 Speed Sleeve

CP 681 Tub Box Kit and CP 681 Firestop Drain Flange
Firestop devices
Malaysia
CP 680-M Series and CP 680-P Series Firestop Devices
Malaysia
CP 675T Firestop Board

CP 680 Top Seal Plugs for use with CP680N, CP 680-M and
CP 680-P Firestop Devices
Hungary
China
FS-ONE Intumescent sealant

CP 620 foam
CP 636 mortar
CP 648 E intumescent wrap strip
CP 648 S intumescent wrap strip
FS 657 Fireblock
CP 606 sealant
CFS-BL Firestop Block
CFS-PL Firestop Plug
CP 672 FC
CFS-DID Series Firestop Devices
Germany
CFS-SP WB Firestop Joint Spray
USA, Germany
CP 604 sealant
CP 617, CP 617L, CP 617XL, CP 619T and CP 618 putty
Netherlands
France
USA
Page 2
You can also view Hiltis present Classifications and System Listings
in ULs on-line Certifications database (www.UL.com) by searching under the
File Nos. R13240 and R15431.
The appearance of the UL Mark on the product is evidence that the
product was produced under ULs Follow-Up Service Program.
We trust that the above provides the requested information.
should you have any additional questions, please contact us.
Very Truly Yours:
Reviewed by:
Margaret Figueroa
Margaret Figueroa
Staff Engineer
Steven J. Hoffman
Steven J. Hoffman
Staff Engineer
Cc:
Mr. Chad Stroike, Hilti, Tulsa, OK

Dr. Wolfgang Lewandowski, Hilti, Kaufering Germany
However,

CP606 and CF125 Fire Stop System by HilTI

Uploaded by

Copyright:

Available Formats

CP606 and CF125 Fire Stop System by HilTI

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

CP606 and CF125 Fire Stop System by HilTI

Uploaded by

Copyright:

Available Formats

Technical Submittal

Hilti Qatar W.L.L.

hereby certify that the organisation

Hilti Qatar W.L.L

Firestop and Fire Protection Systems

Flexible firestop sealant CP 606

Sealing rigid or low-movement ceiling/wall joints, widths from 6

Good adherence without primer

Water-based acrylic dispersion

Approx. curing time2)

Concrete, Masonry, Drywall, Steel

Application temperature range

at 77F/25C and 50% relative humidity; from date of manufacture

Content per can/cartridge

CP 606 310ml white

CP 606 580ml white

CP 606 310ml INT grey

Dispenser foam CF125-50

Insulating gaps around window frames, cooling equipment

Application temperature range

Foam yield (up to)

at 77F/25C and 50% relative humidity; from date of manufacture

Technical Data Sheet

Meets LEEDTM requirements for indoor

Approvals Internationally tested and approved

Installation instructions for CP 606

Not for use

 *OTFSUGJMMPGNJOFSBMXPPMPSCBDLFS BTSFRVJSFE

Skin forming time (at

Joint side material/primer recommendations

a = Joint width (mm)

Fire rating per BS476

Hilti. Outperform. Outlast.

System advantages/customer benets

Simple and ready-to-use 1 component polyurethane foam

Approvals Internationally tested and approved

Store in original packaging in a location protected from

CF 125-50 Dispenser foam

Fire rated foam

Content per can/cartridge

Max. storage temperature

Min. storage temperature

CF125-50 Dispenser foam

When the work with the CF 125-50 foam system is

Overlaying with Fire Resistant Sealants/Mastics

Safety Data Sheet

Safety Data Sheet

6 Accidental release measures

7 Handling and storage

8 Exposure controls/personal protection

Safety Data Sheet

Tightly sealed goggles.

Protective work clothing.

9 Physical and chemical properties

Flammability (solid, gaseous)

Product is not selfigniting.

Product does not present an explosion hazard.

Density at 20 C (68 F):

1.55 g/cm (12.935 lbs/gal) (DIN 51757)

*OTFSUGJMMPGNJOFSBMXPPMPSCBDLFS BTSFRVJSFE