Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd
Upload
1K views

8x8 LED Matrix Using Arduino

This document discusses designing an 8x8 LED matrix display using an Arduino Uno. An 8x8 LED matrix contains 64 LEDs arranged in an 8x8 grid. To interface the LED matrix with an Arduino, a library must be downloaded to enable control of the matrix. The LED matrix module connects to the Arduino on pin 2 for chip select, pin 3 for clock, and pin 4 for data. Code is provided to initialize the LED matrix library, write text to the display such as "CIRCUITDIGEST", and clear the display. Connecting the LED matrix in this way allows easy character display on the 8x8 grid using an Arduino.

Uploaded by

Casey Yeoh
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
1K views

8x8 LED Matrix Using Arduino

This document discusses designing an 8x8 LED matrix display using an Arduino Uno. An 8x8 LED matrix contains 64 LEDs arranged in an 8x8 grid. To interface the LED matrix with an Arduino, a library must be downloaded to enable control of the matrix. The LED matrix module connects to the Arduino on pin 2 for chip select, pin 3 for clock, and pin 4 for data. Code is provided to initialize the LED matrix library, write text to the display such as "CIRCUITDIGEST", and clear the display. Connecting the LED matrix in this way allows easy character display on the 8x8 grid using an Arduino.

Uploaded by

Casey Yeoh
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

8x8 LED Matrix using Arduino

Arduino 8x8 LED Marix


In this project we are going to design an 8x8 LED matrix display, for that we are going to interface
an 8x8 LED matrix module with Arduino Uno. An 8x8 LED matrix contains 64 LEDs (Light
Emitting Diodes) which are arranged in the form of a matrix, hence the name LED matrix.
These matrixes can be made by circuiting 64 LEDs, however that process is time consuming. Now a
day they are available in compact forms as shown in below image. These compact modules are
available in different sizes and many colors. The cost of module is same as cost of 64 LEDs, so for
hobbyists this is easiest to work on.
The bare LED matrix has 16 pin outs with 8 common positive and another 8 common negative. For
connecting this matrix directly to a UNO, we need to spare 16 pins on the UNO. With the output
pins low on UNO, we cannot spare 16 PINS. So we need to connect this matrix to a driver chip.
This driver chip along with matrix comes as a set which is shown in below figure.

This module will be interfaced with Arduino for displaying alphabets, hence the matrix
display. First of all for interfacing LED matrix with Arduino, we need to download a library
specifically designed for LED MATRIX. This library will be available at:
https://github.com/shaai/Arduino_LED_matrix_sketch/archive/master.zip
After downloading the Zip file, extract the contents to ARDUINO folder. (Go to local disk where
ARDUINO NIGHTLY software is installed, open the folder, search for folder named library,
extract the contents of zip file in that folder, restart the program you will now be able to use features
for matrix interface)

Components Required
Hardware: Arduino Uno, Power supply (5v), 100 uF capacitor (connected across power supply)
Software: Arduino Nightly

Circuit Diagram and Explanation


The connections which are done between Arduino Uno and LED matrix module is shown in
below table.
PIN2 ------------------LOAD or CHIPSELECT of LED module
PIN3------------------CLOCK of LED module
PIN4 ------------------DATAIN of LED module
+5V ------------------VCC of LED module
GND ------------------GND of LED module
The circuit diagram of 8*8 LED matrix display is shown in below figure.

Now for using the special futures called by installing new library, we need to establish few
commands in program and are stated below.

#include "LedControlMS.h"
#define NBR_MTX 1
LedControl lc=LedControl(4,3,2, NBR_MTX);
lc.writeString(0,"CIRCUITDIGEST");
lc.clearAll();
First we need to call the header file for interfacing a LED matrix to Arduino Uno. That is #include
"LedControlMS.h", this header file call the library special functions.
We have a feature with these modules we can connect many number of modules in series and
program them together as a single display. This feature comes in handy when we need a display unit
which could display multiple characters at a time. So we need to tell the controller how many
displays we are connecting.
In this module there are mainly three pins; data flow from UNO to module takes places with these
three pins. The pins are DATAIN (data receiving pin), CLOCK (clock pin), and CHIPSELECT
(command receiving pin).
Now we need to tell the UNO where we are connecting these pins. This is done by command
LedControl lc=LedControl(4,3,2, NBR_MTX); . lc.writeString(0,"CIRCUITDIGEST");, this
command is used for telling UNO which characters are to be displayed on the LED matrix. With the
above the display shows CIRCUITDIGEST, with each character once.
We need to clear the display chip memory before sending any other data, this is done by command
lc.clearAll();".
By this way we can easily interface a 8x8 LED matrix to Arduino Uno.
Code:
#include "LedControlMS.h"
//pin 4 is connected to the DataIn
// pin 3 is connected to the CLK
//pin 2 is connected to LOAD
#define NBR_MTX 1 //number of matrices attached is one
LedControl lc=LedControl(4,3,2, NBR_MTX);//
void setup()
{
for (int i=0; i< NBR_MTX; i++)
{

lc.shutdown(i,false);
/* Set the brightness to a medium values */
lc.setIntensity(i,8);
/* and clear the display */
lc.clearDisplay(i);
delay(100);
}
}
void loop()
{
lc.writeString(0,"CIRCUITDIGEST");//sending characters to display
lc.clearAll();//clearing the display
delay(1000);
}
Video:
https://youtu.be/VrW6Bo876kw
URL :http://circuitdigest.com/microcontroller-projects/arduino-8x8-led-matrix

You might also like