Wa0013 PDF

w.e.
f Academic Year 2012-13
G Scheme
MAHARASHTRA STATE BOARD OF TECHNICAL EDUCATION, MUMBAI

TEACHING AND EXAMINATION SCHEME FOR POST S.S.C. DIPLOMA COURSES
COURSE NAME : ELECTRONICS ENGINEERING GROUP
COURSE CODE : EJ/ET/EX/EN/ED/EI/DE
DURATION OF COURSE : 6 SEMESTERS for ET/EN/EX/EJ/DE and 8 SEMESTERS for ED/EI
WITH EFFECT FROM 2012-13
SEMESTER : FIFTH
DURATION : 16 WEEKS
FULL TIME / PART TIME : FULL TIME
SCHEME : G
SR.
NO.
Abbrevi
ation
SUBJECT TITLE
2
3
Computer Hardware &

Networking
Microcontroller
Digital Communication
4
5
6
7
8
Control System & PLC

Audio Video Engineering
Behavioural Science
$
EDP & Project
Professional Practices-III
SUB
CODE
EXAMINATION SCHEME
TEACHING
SCHEME
TH
TU
PR
PAPER
HRS.
TH (1)
PR (4)
OR (8)
TW (9)
Max
Min
Max
Min
Max
Min
Max
Min
--
--
25@
10
10
10
SW
(17500)
CHN
17533
02
--
02
02
50
20
--
--
MIC
DCO
17534
17535
03
03
---
02
02
03
03
100
100
40
40
50#
50#
20
20
--
--
25@
25@
CSP
AVE
BSC
EDP
PPT
17536
17537
17075
17066
17067
03
03
01
01
--
------
02
02
02
02
03
03
03
----
100
100
----
40
40
----
50#
-----
20
-----
--25#
---
--10
---
25@
25@
25@
25@
50@
10
10
10
10
20
50
TOTAL
16
--
17
--
450
--
150
--
25
--
225
--
50
Student Contact Hours Per Week: 33 Hrs.

THEORY AND PRACTICAL PERIODS OF 60 MINUTES EACH.
Total Marks : 900
@- Internal Assessment, # - External Assessment,
No Theory Examination, $ - Common to all branches, #* - Online Theory Examination,
- Common to IE / IS / IC / DE / EV / IU / EL / MU
Abbreviations: TH-Theory, TU- Tutorial, PR-Practical, OR-Oral, TW- Term Work, SW- Sessional Work.
Conduct two class tests each of 25 marks for each theory subject. Sum of the total test marks of all subjects is to be converted out of 50 marks as sessional
work (SW).
Progressive evaluation is to be done by subject teacher as per the prevailing curriculum implementation and assessment norms.
Code number for TH, PR, OR and TW are to be given as suffix 1, 4, 8, 9 respectively to the subject code.
MSBTE Final Copy Dt. 30/10/2013
w.e.f Academic Year 2012-13
G Scheme

COURSE NAME : DIPLOMA IN INDUSTRIAL ELECTRONICS
COURSE CODE : IE
DURATION OF COURSE : 6 SEMESTERS for IE and 8 SEMESTERS for IU
SEMESTER : FIFTH
DURATION : 16 WEEKS
PATTERN : FULL TIME-SEMESTER
SCHEME : G
SR.
NO.
1
2
3
4
5
6
7
8
SUBJECT TITLE
Computer Hardware &

Networking
Microcontroller
Control Systems
Industrial Electronics and
Applications
Advanced Industrial Electronics
Behavioural Science $
EDP & Project
Abbrev
iation
SUB
CODE
EXAMINATION SCHEME
TEACHING
SCHEME
TH
TU
PR
PAPER
HRS.
TH (1)
PR (4)
OR (8)
TW (9)
Max
Min
Max
Min
Max
Min
Max
Min
CHN
17533
02
--
02
02
50
20
--
--
--
--
25@
10
MIC
CSY
17534
17538
03
03
--
02
02
03
03
100
100
40
40
50#
50#
20
20
---
---
25@
25@
10
10
IEA
17541
03
--
02
03
100
40
50#
20
--
--
25@
10
AIE
BSC
EDP
PPT
17542
17075
17066
17069
TOTAL
03
01
01
-16
------
02
02
02
03
17
03
-----
100
---450
40
-----
----150
------
-25#
--25
-10
----
25@
25@
25@
50@
225
10
10
10
20
--
SW
(17500)
50
50
Total Marks : 900
- Common to ET / EJ / EN / EX / IS / IC / DE / EV / IU / ED / EI / EL / MU
work (SW).
G Scheme

COURSE NAME : ELECTRONICS AND VIDEO ENGINEERING
COURSE CODE : EV
DURATION OF COURSE : 6 SEMESTERS
SEMESTER : FIFTH
DURATION : 16 WEEKS
PATTERN : FULL TIME - SEMESTER
SCHEME : G
SR.
NO.
1
2
3
4
5
6
7
8
SUBJECT TITLE
Computer Hardware &

Networking
Microcontroller
Control System & PLC
TV Receiver
Behavioural Science
$
EDP & Project
Abbrevi
ation
SUB
CODE
EXAMINATION SCHEME
TEACHING
SCHEME
TH
TU
PR
PAPER
HRS.
TH (1)
PR (4)
OR (8)
TW (9)
Max
Min
Max
Min
Max
Min
Max
Min
CHN
17533
02
--
02
02
50
20
--
--
--
--
25@
10
MIC
DCO
CSP
TRE
BSC
EDP
PPT
17534
17535
17536
17547
17075
17066
17071
TOTAL
03
03
03
03
01
01
-16
---------
02
02
02
02
02
02
03
17
03
03
03
03
-----
100
100
100
100
---450
40
40
40
40
-----
50#
50#
50#
----150
20
20
20
------
---25#
--25
---10
----
25@
25@
25@
25@
25@
25@
50@
225
10
10
10
10
10
10
20
--
SW
(17500)
50
50

Total Marks : 900
- Common to ET / EJ / EN / EX / IE / IS / IC / DE / IU / ED / EI / EL / MU
work (SW).
G Scheme
Course Name
: Electronics Engineering Group
Course Code
: ET/EN/EJ/IE/IS/IC/DE/EV/MU/IU/ED/EI
Semester
: Fifth for ET/EN/EX/EJ/IE/IS/IC/DE/EV/MU and Sixth for IU/ED/EI
Subject Title
: Computer Hardware and Networking
Subject Code
: 17533
Teaching and Examination Scheme:

Teaching Scheme
Examination Scheme
TH
TU
PR
PAPER
HRS
TH
PR
OR
TW
TOTAL
02
--
02
02
50
--
--
25@
75
NOTE:
Two tests each of 25 marks to be conducted as per the schedule given by MSBTE.
Total of tests marks for all theory subjects are to be converted out of 50 and to be
entered in mark sheet under the head Sessional Work (SW).
Rationale:
Today is the age of information technology. Hence everyone is required to work on
computers and internet. This subject is introduced to focus on basic working of the computer
motherboard, peripherals and networking components.
Theoretical and Practical approach while studying this subject will help in understanding for
troubleshooting, diagnosing computer and its peripheral related problems. Students will aware of
basic concept of networking, its applications, topologies, communication media, network directing
devices, protocol used, OSI reference model and TCP/IP model.
This subject will give exposure to students on computer hardware, peripherals,
specifications, installation, faults and troubleshooting. Students will also be able to plan, analyze,
design, install, configure, test, implement and maintain networking systems
Study of this subject will enable students to select appropriate hardware, list specifications, will
identify simple to complex problems and their solutions. The subject is practical oriented and will
develop the debugging skills in the students
General Objectives.
Students will able to.
Understand principle, construction, working of computer peripherals
Select cost effective, good quality reliable peripherals and equipment
Identify the problem as hardware or software related.
Identify and repair the simple faults in computer systems.
Plan, analyze, design, install, configure, test, implement and maintain networking
systems
17533 EXT5
G Scheme
Learning Structure
Applications
Selection of appropriate hardware based on application

Repair and maintenance of PCs
Plan, analyze, design, install, configure, test, implement and maintain networking systems
Procedure
Learning
architectural
details
Write everything
down
Do the easy stuff first
Check for operator
error
Check the software
Check external
signals
Run diagnostic
programs
Repairing
the different
components
of PC by
using
different
methods
Follow step
by step
procedure to
install
TCP/IP
Protocols
and TCP/IP
configuratio
n
Testing and
troubleshooting
of network
connectivity
Network
configuration,
installation and
maintenance
Network
utilities
Principle
Logic of
components
Concept
Motherboard,
drive formatting,
latency, landing
zone, HDD,
FDD, Active,
Passive, modular
motherboard
Rules of
troubleshooting
Rules of
repairing
Principle of
TCP/IP
reference
model
Error codes, memory package,

styles and structures, memory
signals, memory manager, disk
manager, EZ-Drive, DMI, SCSI,
Video adapter etc.
Principle of OSI reference model
Types of
Topology
LAN, WAN,
MAN
Types of
Network
devices
Types of
Transmission
media
Computer
Network and
Benefits
Classification of
Network
Network
Features
Facts
AT, ATX,
motherboard,
AGP, PCI Port
etc.
Problems of
system boards,
display
problems
Tools for
repairing the
faults, types of
tests
17533 EXT5
G Scheme
Theory:
Chapter
01
02
03
Topic and Contents

Hours
Topic 1] Motherboard and Peripherals
Specific Objectives:
Identify different components and their function on
motherboard
Identify and compare storage devices
Write specifications, select appropriate monitor and
compare LCD and CRT monitors
Understand principle, construction and working of
peripherals
Contents:
Different types of PC configurations and their comparison,
Chipset basic, Architecture of Intel 945 G
Overview and features of ISA, PCI-X, PCI-Xpress
10
Overview features and types of DDR RAMs, Concept of cache
memory : Internal cache, External cache (L1, L2, L3 cache),
BIOS Basics
CD/DVD ROM drive : Construction, recording, comparison
LCD monitor: functional block diagram of LCD monitor,
working principle, Types-Passive matrix and Active matrix.
Important characteristics - Resolution, Refresh rate, Response
time. Comparison of CRT display and LCD display
Construction, working & Installation of Keyboard, mouse,
scanner and printer. Keyboard: Membrane and mechanical only.
Mouse: Optical only, Scanner: Flatbed only, Printer: Dot
matrix, Inkjet, and Laser only
Topic 2] Power Supply and Interfaces
Select, identify, measure and troubleshoot power
related problems
Differentiate online and offline UPS.
Identify, select and use different interfaces
Contents:
04
2.1
Block diagram and working of SMPS, Signal description and
pin diagram of ATX power supply.
UPS : Block diagram working, Types, Rating
2.2
USB features and operation, RS232: Voltages & 9 pin Signal
description.
Topic 3] Diagnostic, Testing and Maintenance
Identify importance of preventive maintenance
Realize the need of practices of preventive
maintenance of peripheral
04
Contents:
Maintenance : Preventive and passive maintenance
Preventive maintenance of peripherals of PCs: Mouse, keyboard,
hard disk, CDROM drive, laser printer, scanner.
Marks
17533 EXT5
14
06
08
04
05
G Scheme
PC problems and troubleshooting, POST.

Topic 4] Introduction to Networks
Classify types of networks
Plan and design network
Install, configure and use networking devices
Test and maintain networks
Contents:
Network classification: LAN, WAN, MAN. Peer to peer and
client server networks
Network topology, Benefits of networks
Network cables- coaxial, UTP, STP, fiber optics their comparison
and characteristics
Network standards- Ethernet, Ring, Token, wireless
Principle, operation and function of Hubs, Switches, Routers,
Bridges, Repeaters, Gateways, firewalls
Topic 5] Networking Devices and Reference Models
Understand layered approach
Compare TCP-IP and OSI models
Setup and configure network in laboratory
environment
Contents:
OSI Reference Model - Interlayer Communication - Data
Encapsulation, Functions of each layer.
TCP/IP Reference Model - Link, Internet, Transport, Application
layer.
Comparison of the OSI and TCP/IP reference models
TCP/IP Protocols - IP, ICMP, ARP, TCP, FTP and UDP.
IP Addressing - IP Address Assignments, IP Address Classes,
Subnet Masking.
TCP/IP Configuration - Installing the TCP/IP Protocol;
Configuring TCP/IP - Configuring Basic TCP/IP Properties,
Configuring Advanced TCP/IP Properties
Total
06
10
08
12
32
50
Skills to be developed:
Intellectual Skills:
1. Identify and select appropriate peripherals
2. Plan schedule for preventive maintenance of computer systems and network
3. Test and troubleshoot the problems in computer systems
4. Plan, analyze, design, configure networking systems
5. Select different hardware and software diagnostic tools of networking.
Motor Skills:
1. Handling of computer system and peripherals
2. Assembly of computer systems
17533 EXT5
G Scheme
3. Install and testing of network components

4. Crimping of cables.
Practical: List of experiments
1. Computer System: Show different types cabinets and motherboards to students.
Identify CPU types, motherboard architecture, form factor, chipsets used, RAM slots,
different types of buses, on board peripherals, different connectors like sata/pata,
ATX/AT, FDD, and other connections terminated at front or rear panels. CMOS battery,
BIOS type, jumper settings. List the standard specifications of latest PC.
2. Keyboard: Identify different types of keyboards, types of keys, number of keys,
different type of keyboard connectors, there details, Keyboard installation, wireless
keyboard, typical keyboard errors and troubleshooting procedures of it, Guidelines for
preventive maintenance of keyboards
Mouse: Identify different types of mouse, dissemble mouse, and show different parts /
mechanisms of mouse, principle of operation, connectors of mouse, wireless mouse,
typical mouse faults and trouble shoot procedure of it. Guidelines for preventive
maintenance of mouse
3. Hard Disk: Identify different types of hard disk, classify them into PATA and SATA,
Open hard disk show different parts of hard disk, identify pins and connectors of HDD,
How to make HDD primary/secondary i.e. jumper settings of IDE disk, SCSI hard disk
and its controller card. Explain terms related to Hard Disk : Track, Sector, cylinder,
cluster, Head parking, MBR, Zone recording.
4. Formatting and Partitioning of Hard disk: Low level and high level formatting of
hard disk, partitioning of hard disk into different logical drives using fdisk or similar
third party utilities. Install multiple Operating systems on same hard disk. Identify
different errors, Standard procedures to troubleshoot hard disk
5. Display Adapter: Identify display adapters and its types. Identification of appropriate
drivers of connected display device. Installation of display drivers, setting resolutions,
factory settings, different controls on front panel of monitor. Types of monitors, there
comparison, typical faults of monitor, Troubleshooting procedure of monitors
6. Scanner: Identify different types of scanners, principle of operation, typical
specifications, installing scanner, scanning of images, typical faults of scanner and
trouble shoot procedure of it. Preventive maintenance of scanner.
7. Modem: Identify different types of modem, installation of modem, modem operations,
different types of indicators on front panel of external modem and there meanings,
modem connectors, Typical faults and maintenance of modem
8. Power Supply: ATX power supply, pin details, voltage measurement, typical faults and
troubleshooting procedure of SMPS, Preventive maintenance.
9. Printer: Identify printers, typical components of each printer, printer specifications,
printer installation of local and network printers. Typical faults of printer and trouble
shoot procedure of it. Guide lines for preventive maintenance of printer.
10. Network Cables: Identify different types of network cables, comparison , prepare
straight and cross cable by crimping and test the same with network tester.
11. Setup of client server network in a Lab: Connect one computer lab in client server
configuration using hub/ switch, UTP cables, RJ-45 connectors. Install network cards,
Test them, set IP addresses in class-c network, test connectivity of clients to server using
software utilities, demonstrate client server based application
17533 EXT5
G Scheme
Learning Resources:
Books:
Sr.
No.
Author
Title
Publisher
01
Mark Minasi
The Complete PC Upgrade &

Maintenance Guide
Willey Publication
02
Scott Mueller
Upgrading & Repairing PCs
Pearson Education
03
Bigelow
04
William Stalling
05
Douglas E Comer &

M S Narayanan
Bigelow's Troubleshooting,
Maintaining & Repairing PCs
Local and metropolitan Area
Networks 6/e
Computer Networks and Internet
Tata McGraw Hill

Pearson
Pearson
Websites:
1. ccna.com
2. ccna.com/ccna-training
3. learningnetwork.cisco.com
4. www.mcse-training.com
5. www.microsoft.com/learning/en/us/certification/mcse.aspx
6. www.intel.com/products/processor
7. www.intel.com/products/desktop/motherboard
8. www.seagate.com
9. www.scsisource.com
10. www.w3schools.com/tcpip
11. www.protocols.com
17533 EXT5
G Scheme
Course Name
Course Code
Semester
Subject Title
: Microcontroller
Subject Code
: 17534

Teaching Scheme
Examination Scheme
TH
TU
PR
PAPER
HRS
TH
PR
OR
TW
TOTAL
03
--
02
03
100
50#
--
25@
175
NOTE:
Rationale:
This subject comes under technology area. The subject is an extension of concepts covered
in digital technique. 8051 microcontroller architecture, peripheral interfacing to it, assembly
language programming is covered in this subject.
Microcontroller is heart of all domestic, industrial, consumer goods and other high end
products. Automation in every field of life is being used and microcontroller is inbuilt element of
these systems and devices.
The student will gain the knowledge of peripheral interfacing and programming them.
Microcontroller is in built element of embedded system. The subject will help the students to study
concepts of embedded system. It will also help to understand design of simple microcontroller
systems.
General Objectives.
Students will able to:
Understand concepts of microcomputer, microprocessor and microcontroller.
Interface peripherals to microcontroller.
Develop logic for assembly language programming.
Understand the principles of working of present day microcontroller systems in various
fields.
17534 EXT5
G Scheme
Learning Structure:
To Interface simple peripherals to

8051 and use them.
Application
Procedure
Principles
Procedural steps for writing

assembling and executing assembly
language program for 8051.
Principles of assembly language programming. Principles of

interrupt, timer, and serial communication. Principles of
memory, ports and device interfacing.
T
External ports,
Concepts
Facts
Procedural steps for

interfacing peripherals to
8051.
8255 modes, External

RAM & ROM
memories.
Memory, Latches,
buffers
Microcontroller
8051
microcontroller
architecture.
Microprocessor and
Micro-computer
Registers
Counters, tri-state
devices decoders
ALU, Boolean
algebra, logic
operations, MUX,
DE-MUX
17534 EXT5
G Scheme
Theory:
Topic and Contents
Hours Marks
Topic 1: Introduction to Microcomputers and Microcontrollers
Distinguish microcomputer, microprocessor, and microcontroller
Contents:
1.1 Introduction to single board microcomputer.
(Marks 04)
Block Diagram of Microcomputer.
Elements of Microcomputer. (Buses, Microprocessor, memory, I/O
devices).
04
10
Different types of buses: address, Data, and control bus
1.2 Introduction to Microcontroller
(Marks 06)
General block diagram of microprocessor and microcontroller
Comparison of Microprocessors and Microcontrollers.
Types of architectures - Harvard and Von-neuman.
Selection factors of microcontroller(Architecture type, speed, Word
size, instruction set, memory, and I/O capability)
Topic 2: 8051 Microcontroller
Identify Hardware features and internal registers with their functions
Identify physical difference between external and internal memory
and between different ports
Compare different members of 8051 family.
Contents :
08
16
2.1 8051 architecture
(Marks 10)
Features, Architecture, Pin description.
2.2 Special Features of 8051
(Marks 06)
Boolean Processor, Power saving options- idle and power down mode,
Derivatives of 8051.
Topic 3: 8051 Instruction set and programming
Comprehend addressing modes and instruction set.
Develop and realize assembly language programs.
3.1 Addressing modes and instruction set.
(Marks 10)
Assembler directive- ORG, DB, EQU, END, CODE, DATA
12
24
3.3 Assembly language programming

(Marks 10)
3.4 Software development cycle- Editor, Assembler, cross compiler, linker,
locater, compiler
(Marks 04)
10
17534 EXT5
G Scheme
Topic 4: MCS 51 Interrupt and timers

Realize Concept of Interrupts, timer, and related SFRs
Use timers and Interrupts through programs
Compare interrupts and polling method.
Contents:
4.1 8051 Timer/counter
(Marks 12)
Timer / Counter logic and modes
Simple programs on timer to generate time delay using polling and
interrupt method.
4.2 8051 Interrupts
(Marks 10)
Interrupts and polling.
SFR - IE, IP
Simple programs based on interrupts and polling method
Topic 5: Serial Communication and parallel ports:
Comprehend Serial and parallel communication
Contents:
5.1 Serial port of 8051
Serial Communication-SCON, SBUF
Modes of serial communication
Simple programs for serial communication.
I/O port structure & its Programming.
Topic 6: Memory and I/O interfacing
Interface I/O devices and memory devices
Expand memory and I/O
Contents:
6.1 Memory Interfacing:
(Marks 06)
Interfacing External RAM and ROM
6.2 I/O Interfacing:
(Marks 10)
8255-Block diagram, operating modes
Port expansion with 8255
Interfacing of LED, keys, Relays, Seven segment display, Stepper
motor.
Total
10
22
06
12
08
16
48
100
Practicals:
Intellectual skill
1. Understand hardware and instruction set.
2. Develop assembly programs.
Motors skills
1. Handle trainer kits, computer.
2. Interface peripherals.
List of practicals:
1. Know 8051 kit and simulation software in your lab.
2. Develop program for arithmetic operation such as addition, subtraction multiplication,
division.
3. Develop program for block exchange and block transfer with external memory.
11
17534 EXT5
G Scheme
4. To develop program for finding smallest/largest number and arranging numbers in

ascending/descending order.
5. Generate square wave and rectangular wave on port pin with a program.
6. Interface LED and key with 8051 and making LED on/off with a key press.
7. Interface 7-segment display and design up/down counter on it with a program.
8. Display of key depression in decimal format on 7- segment display using lookup table
through program.
9. Interface 8 bit DAC to generate different patterns and interface 8 bit ADC and develop
program to convert analog data and store it.
10. Develop program for level controller/Traffic Controller.
Learning resources:
1. Books
Sr.
No.
Title
Author
Publisher
01
8051 Microcontroller
architecture programming &
application.
K. J. Ayala
EEE/ Prentice Hall of

India
02
The 8051 microcontroller &

embedded system.
Mohmad-ali-mazidi,
Janice-Gelispe-mazidi ,
Roline D. Mckinlay
Pearson / Prentice hall
Ajit Pal
Prentice Hall of India
Ajay Deshmukh
Tata McGraw- Hill
Rajkamal
Pearson
Satish shaha
Oxford
03
04
05
06
Microcontroller principal &

application
Microcontroller theory &
application.
Microcontroller Architecture,
programming, interfacing, &
system design
8051 Microcontroller Mcs-51
family and its variant.
2. C.Ds / PPTs : www.osvn.com

3. Websites:
www.youtubecom
www.keil.com
www.faqs.org/microcontroller
12
17534 EXT5
G Scheme
Course Name
Course Code
: EJ/EX/ET/EN/DE/EV/ED/EI
Semester
: Fifth for EJ/EX/ET/EN/DE/EV and Sixth for ED/EI
Subject Title
: Digital Communication
Subject Code
: 17535

Teaching Scheme
Examination Scheme
TH
TU
PR
PAPER
HRS
TH
PR
OR
TW
TOTAL
03
--
02
03
100
50#
--
25@
175
NOTE:
Rationale:
Digital communication is a Core subject for the Electronics & Communication
engineering student. Communication technologies have undergone radical changes, especially due
to convergence of computers and communication. Digital communication offers data processing
option and flexibility which is not available with analog communication. This subject will enable
the student to comprehend facts, concept and working principles of Digital communication
systems.
This subject familiarizes the student with digital information theory, information rate and
channel capacity. This subject helps the students to understand the concept of principles of digital
modulation technique, channel coding method and error control multiplexing, Multiple Access
scheme and spread spectrum modulation.. The Knowledge acquired by student will help them to
apply in various modern communication systems.
General Objectives:
Student will be able to
Understand principles and Concept of various digital modulation techniques.
Understand various coding, error detection and error correction methods.
Understand various multiplexing technique and multiple Access Scheme.
Understand spread spectrum modulation and their different methods.
MSBTE - Final Copy Dt. 30/10/2013
13
17535 EXT5
G Scheme
Learning Structure:
Application
Understand Digital Communication System

Understand the basics of various modern communication system such as
mobile communication, satellite communication
Procedure
Block diagram of Digital pulse modulation techniques, Digital

Modulation techniques, Model of spread spectrum, Identification of
different coding methods and error control.
Principles
Multiplexing &
Multiple Access
FDM, TDM,
CDM, SDM,
TDMA, FDMA,
CDMA, OFDM
Waveform
coding and
error control,
Source
coding,
channel
coding, line
Digital
Modulation
techniques
ASK, FSK,
PSK, DPSK,
QPSK, QAM
DSSS,
FHSS,
DSSS CDM
A
Digital pulse modulation system PCM, DM, ADM, DPCM
Concept
Sampling, Quantization, coding

Multiplexing, Multiple access
Facts
Spread Spectrum, PN sequence,

Hopping
Modulation, Demodulation, Transmission, Reception
14
17535 EXT5
G Scheme
Theory:
Topic and Contents
Topic 1: Introduction of Digital Communication
Define Digital Communication, communication channel
Explain different element of Digital Communication.
Compare analog. with digital communication
Contents:
Historical perspective of Digital Communication
Elements of Digital Communication system with its block diagram.
Communication channel types and their Characteristics (bit rate,
bandwidth, repeater distance) applications, and Channel modeling,
channel noise.
Comparison of Analog and digital communication system.
Topic 2: Digital Pulse Modulation Techniques.
Define and explain, generation and demodulation of various digital
pulse modulation techniques.
Define Sampling theorem
Compare digital pulse modulation with analog modulation
Contents:
2.1
[04 Marks]
Sampling process Nyquist sampling theorem.
Quantization process , Quantization error, Quantization noise, Uniform
,Non Uniform Quantization (companding) u law, A law (concept)
2.2
[16 Marks]
Pulse code modulation (PCM) Transmitter and Receiver block diagram
and its working. Advantage and Disadvantages of PCM.
Differential pulse code modulation (DPCM). Transmitter and Receiver
block diagram and its working, Advantage and disadvantage of
DPCM
Delta Modulation (DM) Block diagram of Transmitter and Receiver,
slope overload and Granular noise, Advantage and disadvantage of
DM.
Adaptive Delta modulation (ADM) Transmitter and Receiver block
diagram. Advantage and Disadvantages of ADM
Comparison of analog and Digital Pulse modulation, Comparison of
various digital pulse Modulation
Topic 3: Coding Methods and Error Control.
Define bit rate, baud rate
State Hartleys law, Shannon Hartleys theorem and channel capacity.
Define source coding
Explain channel coding and their types and error correction codes.
Define various types of line coding.
Hours
Marks
02
06
12
20
08
16
Contents:
3.1
[06 Marks]
Bits, bit rate and baud rate, Hartleys law, Shannon Hartleys theorm,
Channel capacity.
15
17535 EXT5
G Scheme
Source coding, sources, Entropy, baudot code, Huffman coding.

[10 Marks]
Channel coding : error, causes of error and its effect ,error detection
and correction using parity, error control codes, checksum, Two
dimensional parity check Vertical redundancy Check (VRC) ,
Longitudinal Redundancy Check (LRC) , ,,,Cyclic Redundancy Check
(CRC), Hamming codes.
Line coding: classification of line codes uni polar, Polar Non return to
Zero (NRZ) and Return to zero (RZ), Bipolar (NRZ), Manchester (split
phase), Differential Manchester Bipolar RZ, Pseudo ternary, alternate
Mark Inversion (AMI) and their waveforms.
Topic 4: Digital Modulation Technique.
Define M- ary encoding
Explain various transmitter & receiver for digital communication
Compare various digital modulation techniques.
Draw constellation and proper diagram.
3.2
Contents:
M-ary encoding , Minimum bandwidth
Amplitude Shift Keying (ASK) Frequency shift keying (FSK), Phase
shift keying (PSK), transmitter and receiver block diagram and their
working with waveform.
Quadrature Phase shift keying (QPSK ) , Quadrature amplitude
modulation (QAM), Differential Phase shift keying (DPSK)
transmitter and receiver block diagram and their working with
waveform.
Constellation diagram and phasor diagram of each modulation
techniques.
Comparison of Digital modulation technique along with bandwidth of
each one.
Topic 5: Multiplexing & Multiple Access.
Define FDM , TDM , CDM SDM
Explain multiple acess system like FDMA , TDMA , CDMA , SDMA
Compare OFDM , and CDMA
Contents:
5.1
[10 Marks]
Need of Multiplexing Time Division Multiplexing (TDM), Frequency
Division Multiplexing (FDM), Code Division multiplexing (CDM),
Space Division Multiplexing (SDM) definition, block diagram and
their comparison.
T carrier system, Digital multiplexing hierarchy, North American
hierarchy, The CCITT digital multiplexing hierarchy
Introduction to Wavelength Division Multiplexing (WDM )
5.2
[10 Marks]
Access techniques Time Division Multiple Access (TDMA), Frequency
Division multiple Access (FDMA), Code Division Multiple access
(CDMA), Space Division Multiple Access (SDMA), comparison of
different Access techniques.
16
12
24
08
20
17535 EXT5
G Scheme
Wide band modulation Techniques: Orthogonal Frequency Division

Multiplexing (OFDM) basic principle of orthogonality, single vs.
multicarrier system OFDM block diagram and its explanation.
Comparisons between CDMA and OFDM
Topic 6: Spread Spectrum Modulation
Define PN sequence
Explain Spread Spectrum modulation s DSSS & FHSS
Sate Applications of S.S modulation
Contents:
6.1
[06 Marks]
Introduction to spread spectrum (SS) Modulation, advantages over
fixed frequency, Types of SS Modulation Applications of SS
modulation.
Pseudo Noise (PN ) sequence: definition, generation and maximum
length sequence
Model of Spread Spectrum modulation system
6.2
[08 Marks]
Direct sequence spread spectrum signal.
Frequency spread spectrum. Slow frequency hopping and fast
frequency hopping.
Comparisons of Direct sequence spread spectrum (DSSS) and
Frequency Hop spread spectrum (FHSS)
DSSS based CDMA system , CDMA with FHSS block diagram
Total
06
14
48
100
Practical:
1. Interpret given circuit, type of modulation
2. Interpret the results
3. Interpret the various types of waveforms
Motor Skills:
1. Draw circuit diagram
2. Setting up of equipment
3. Accurate observation and draw the waveforms
List of Practicals:
1. Verification of sampling theorem. Observe and plot waveforms of Pulse Code Modulation
& Demodulation, observe PCM output with A-law and u-Law.
2. Observe and plot waveforms of Differential Pulse Code Modulation & Demodulation
3. Observe and plot waveforms of Delta & Adaptive Delta Modulation & Demodulation
4. To generate following different line codes UPNRZ, PRZ, BPRZ,PNRZNRZ (Unipolar) and
observe waveforms of Line codes on CRO. To generate Manchester &Differential
Manchester codes and decode them.
5. Observe and plot waveforms of ASK,FSK,PSK Modulation & Demodulation
6. Observe and plot waveforms of QPSK Modulation & Demodulation
17
17535 EXT5
G Scheme
7. Observe and plot waveforms of QAM Modulation & Demodulation

8. Observe and plot waveforms of DPSK Modulation & Demodulation
9. FDM & TDM multiplexing / demultiplexing system
10. To generate variable length PN sequence. To generate CDMA-DSSS signal and demodulate
it. To study spreading and dispersing
11. To generate FHSS modulated signal and demodulate it. To study spreading and dispersing
Learning Resources:
1. Books:
Sr.
No.
Author
Title
Publisher
1.
P. Ramakrishna Rao
Tata Mcgraw Hill
2.
Amitabha Bhattacharya
Tata Mcgraw Hill
3.
Wayne Tomasi
Electronics Communication
System
Pearson Education
4.
Upen Dalal
Wireless Communication
Oxford
2. Websites:
1. http://academicearth.org/courses/principles-of-digital-communication lecture 1 & lecture 6
2. http://nptel.iitm.ac.in/video.php?subjectId=117101051digital communication lecture series
3. http://educypedia.karadimov.info/electronics/javamodulationdig.htm
FDMA,
TDMA,
CDMA, FSK, PAM etc Animations

4. http://educypedia.karadimov.info/electronics/rfdigmod.htm
various
topics
on
digital
modulation
18
17535 EXT5
G Scheme
Course Name
Course Code
: ET/EN/EX/EJ/DE/ED/EI
Semester
: Fifth
Subject Title
: Control System & PLC
Subject Code
: 17536

Teaching Scheme
Examination Scheme
TH
TU
PR
PAPER
HRS
TH
PR
OR
TW
TOTAL
03
--
02
03
100
50#
--
25@
175
NOTE:
Rationale:
Control is the process of causing a system variable to take some desired value, known as
reference value. A control system consists of several elements or components connected and
operated in such a way as to achieve a desired control in a specific domain of operation of the
system. This can be as simple as making the temperature in a room stay at 21C or as complex as
manufacturing an integrated circuit or guiding a spacecraft to Jupiter. In general, all the elements
necessary to accomplish the control objective are described by the term control system.
The subject intends to teach the student different control systems used in various field like
automobile industry in application such as pick and place, welding, spray painting etc. The subject
introduces the common industrial control system elements such as Programmable logic controller.
General Objectives:
The student will be able to:
1. Understand classifications of control system.
2. Understand Steady state, time response, and frequency response analysis.
3. Analyze the Stability of control system using RH criteria.
4. Understand the fundamentals and diff. Hardware parts of PLC.
5. Draw ladder diagrams to program PLC
19
17536 EXT5
G Scheme
Learning Structure:
Application
Control system mechanism for various industrial applications.
Understanding PLC applications for controlling diff. processes.
Procedure
Obtaining 1st
and
2nd Order
system time
response
Stability
analysis
with R-H
criteria
Observation
of output
responses of
electronic
controllers
PLC I/O
Addressing
formats,
Instruction
set.
Ladder logic
programming
language
Principle
PLC block
diagram,
input/output
modules
Block
diagram
reduction
technique
Concept
Transfer
function
Facts
Time
response,
standard test
input
specification
Frequency Controller
response, actions, P,
s- Plane
PI, PID
controllers
Basics of
automation,
PLC control
logic
Types of control system, Open loop and closed loop control system, Laplace
transform, Relay control and Concept of automation.
20
17536 EXT5
G Scheme
Theory:
Topic and Contents
Topic 1: Introduction to the Control System
Explain different types of control system
Develop transfer functions
Differentiate between 1st& 2nd order of system
Develop and solve block diagram of control system
Contents:
1.1
[4 Marks]
Control System: Definition and practical examples.
Classification of control system: Open loop & closed loop systems
- definition, block, diagram, practical example, and Comparison,
Linear and non linear system, Time varying and time in varying
systems
Servo system: Definition, Block diagram, classifications (AC &
DC), Block Diagram of DC servo system.
1.2
[4 Marks]
Laplace transform: Significance in control system.
Transfer function: Definition, Derivation of transfer functions for
close loop& open loop control system, Differential equations &
Transfer functions of RC and RLC electrical circuits.
1.3
[8 Marks]
Order of a system: Definition, 0, 1, 2 order system standard
equation, practical examples.
Block diagram reduction technique: Need, reduction rules,
problems.
Topic 2: Time Response Analysis
Appreciate the importance of standard inputs and apply them in
analysis of control system
Differentiate between poles and zeros
Analyze 1st& 2nd order control system for step input
Calculate time response specifications for different systems
Contents:
2.1
[4 Marks]
Time domain analysis: Transient and steady state response
Standard test inputs: Step, ramp, parabolic & impulse, Need,
significance, and corresponding Laplace representation.
Poles& zeros: Definition, S-plane representation
2.2
[8 Marks]
First order control system: Analysis for unit step input, Concept of
time constant
Second order control system: Analysis for unit step input,
Concept, definition & effect of damping
2.3
[8 Marks]
Time response specifications (no derivations)
21
Hours
Marks
08
16
12
20
17536 EXT5
G Scheme
Tp,Ts,Tr,Td,Mp,ess.
Problems on time response specifications
Steady state analysis: Type 0,1,2 systems, Steady state error &
error constants, numerical Problems
Topic 3: Stability
Appreciate the importance of stability
Analyze different types of stability
Apply Rouths stability criterion for stability analysis and solve the
numerical.
Contents:
3.1
[4 Marks]
Stability: Definition of stability, Analysis of Stable, unstable,
critically stable & conditionally stable system, Relative stability,
Root locations in S-plane for stable and unstable systems.
3.2
[8 Marks]
Rouths Stability Criterion: Different cases & conditions
(statement method),Numerical Problems
Topic 4: Control Actions
Explain the need of Control actions
Differentiate between different types of Control actions Such as P, I
&D
Explain composite controllers; PI, PD, PID controllers
Contents:
4.1.
[4 Marks]
Process control system: Block diagram & explanation of each
block.
4.2. Control actions
[8 Marks]
Discontinuous modes:
ON OFF controllers: equation, neutral zone
Continuous modes:
PROPORTIONAL controllers (offset, proportional band),
INTEGRAL & DERIVATIVE controllers; o/p equations,
corresponding Laplace Transforms, Response of P,I & D
controllers
Composite controllers:
PI, PD, PID controllers- O/P Equations, Response, Comparison
Topic 5: PLC Fundamentals
Explain the basics of PLC.
Draw functional block diagram of PLC.
Contents:
5.1
[4 Marks]
Evolution of PLC in automation, need and benefits of PLC in
Automation.
5.2
[12 Marks]
Block diagram & description of different parts of PLC : CPU
function, scanning cycle, speed of execution, Power supplyMSBTE - Final Copy Dt. 30/10/2013
22
06
12
04
12
06
16
17536 EXT5
G Scheme
function, Block diagram,

Memory function & organization of ROM & RAM, Input
modules- function, diff. input devices used with PLC(only name &
their uses)
Output modules- function, diff. output devices used with PLC(only
name & their uses) ,Fixed and Modular PLCs.
Topics 6: PLC Hardware &Programming
Explain the details of diff. I/O modules of PLC.
Get familiar with the instruction set of PLC system.
Develop PLC programming skills.
Contents:
6.1.
[8 Marks]
Discrete input modules: Block diagram, typical wiring details and
specifications of AC input modules & DC input module. Sinking
and sourcing concept in DC input modules.
Discrete output modules: Block diagram description, typical wiring
details and specifications of AC output module & DC output
modules.
Analog input and output modules: Block diagram, typical wiring
details and specifications.
6.2.
[16 Marks]
I/O addressing of PLC
PLC Instruction set: relay instructions, timer instructions, counter
instructions, data handling instructions, logical and comparison
Instructions.
PLC programming examples based on above instruction using
Ladder programming language.
Total
12
24
48
100
Practical:
Reading and interpretation of the graph.
Interpretation of the results from observations and calculations.
Software development
Programming using ladder language
Motor Skills:
Proper handling of instruments.
Measuring physical quantities accurately.
Observational Skills
List of Practical:
1. Measurement and control of error of angular position of DC Servo system.
2. Step response of first order R-C circuit.
3. Measurement & control of temperature with on-off controller
4. Measurement & control of temperature with PID controller.
5. Measurement & control of temperature with Proportional controller.
23
17536 EXT5
G Scheme
6. Verify functions of logic gates by using PLC.

7. Write and verify ladder program for ON-Off control of Lamp.
8. Write and verify ladder program for stepper motors.
9. Verify the use of Timers and counters with suitable application.
10. Design of temperature control system using PLC.
List of Laboratory equipment:
1. DC Position trainer kit
2. PID controller trainer kit
3. PLC Trainer kit(with minimum 20 digital I/O points and 2 Analog I/O channels)
List of Assignments:
Numerical problems from Chapter 1, 2 & 3.
Learning Resources:
1. Books:
Sr.
No.
Author
Title
Publisher
J. J. Nagrath & M. Gopal
Control System Engg.
McGraw-Hill
K. Ogata
Modern control Engg.
PHI
C. D. Johnson
Gary Dunning
F. D. Petruzella
Jhon Hackworth and

Federic Hackworth
Process control
instrumentation Technology
Intro. To Programmable logic
control
Programmable logic controllers
(Third edition)
Programmable logic controllers
Prentice Hall
Cenage Learning
Tata McGraw-Hill
Pearson education
2. Websites:
www.learningpit.com - for PLC simulation software downloading.
www.plctutor.com - for PLC tutorials
en.wikipedia.org/wiki/PID_controller
24
17536 EXT5
G Scheme
Course Name
Course Code
: EJ/EX/ET/EN/DE
Semester
: Fifth
Subject Title
: Audio Video Engineering
Subject Code
: 17537

Teaching Scheme
Examination Scheme
TH
TU
PR
PAPER
HRS
TH
PR
OR
TW
TOTAL
03
--
02
03
100
--
--
25@
125
NOTE:
Rationale:
The field of television engineering and video system has witnessed rapid growth especially
in digital TV broadcast and recording system. Thus with widespread use of advanced audio and
video equipments, the subject audio and video engineering is introduced in electronic engineering
group of diploma courses .This subject is also useful for enhancing the knowledge of analog system
applications.
The topic on Audio engineering contains Hi-Fi amplifiers with mono and stereo amplifiers,
public address system, and Dolby-NR recording system similarly CD player and disc recording of
audio and video signals and their playback.
The topic on Video Engineering contains TV fundamentals with basic parameters of TV,
tri-colour theory, composite-video signal, CCIR-B standards. The contents of colour TV includes
audio video-signal transmission and reception, positive and negative modulation, camera tubes,
picture tube, colour TV decoder and latest TV technology such as HDTV, LCD TV, LED TV.
The topic on cable TV explains how the TV signals are collected from different sources,
mainly satellite and on due processing distributed from cable station to subscribers over the cable
network.
General Objectives:
Students will able to
1) Understand operation of audio amplifiers.
2) Analyze quality of reception of various sound systems and graphic equalizer
3) Understand CD player mechanism.
4) Understand the principle of operation of various advanced TV systems.
25
17537 EXT5
G Scheme
Learning Structure:
Trouble shooting and maintenance in T.V. and radio
broadcasting stations, A.V. studios.
Applications
Procedure
Principle
Concept
Operation of various sections of

audio systems.
Principles
of mono,
Stereo,
Hi-Fi and
PA system.
Principles
of CD
system.
Operation of various sections of video

systems.
VCD/
DVD
MP3.
Principles
of PAL
TV.
Graphic equalizer, Dolby NR system, crossover

network, detection mechanism in CD player.
Principles of
cable TV, M.A
TV, CCTV
System.
HDTV and
LCD
display.
Aspect ratio, interlace scanning, VSB

transmission and tricolor theory.
Modulation and demodulation process, working of

transmission lines ,antennas and wave propagation
Fact
26
17537 EXT5
G Scheme
Theory:
Topic and Contents
Hours
Topic 1] Hi Fi Audio Amplifier
Students will be able to
Distinguish between different types of Audio amplifiers
Explain the principle and operation of Graphic equalizer
Draw labeled sketch of Hi-Fi amplifier
Define pre-emphasis and de-emphasis
Contents:
07
Introduction to Amplifiers: Mono, Stereo, Public Address. Difference
between stereo amplifier and Mono amplifier.
Block diagram of Hi Fi amplifier and its working. Controls available on it
and their function, Graphic equalizer concept- circuit diagram and
operation. (5-Point Circuit diagram)
Dolby NR recording system
Types of speaker woofer, Mid-range, Tweeter
Cross over network circuit and its function
Topic 2] CD player
Describe the principle of detection mechanism of CD player
List the components used in CD mechanism
Contents:
CD Material used, Size and Capacity.
05
Block diagram and operation of CD player.
Component used for CD mechanism: CD pick-up assembly, gear system,
drive motors, CD lens. Function of front panel controls.
Function of remote control transmitter and receiver unit used in CD
player.
Advantageous of Vacuum florescent.
Topic 3] TV Fundamentals
Define various terms used in TV system
Draw and label composite video signal wave-forms
State CCIR-B standards for TV system
3.1
[08 Marks]
Concept: Aspect ratio, image continuity, interlace scanning, scanning
periods horizontal and vertical, vertical resolution, horizontal
resolution.
Vestigial sideband transmission, bandwidth for Colour signal, brightness,
09
contrast, viewing distance, luminance, Hue, saturation, compatibility.
3.2
[08 Marks]
Colour theory, primary colours and secondary colours Grassmans law,
additive Colour mixing subtractive Colour mixing.
3.3
[08 Marks]
Composite Video Signal - Pedestal height, Blanking pulse, Colour burst,
Horizontal sync pulse details, Vertical sync pulse details, Equalizing
pulses, CCIR B standards for Colour signal transmission & reception.
TV channel allocation for band I & band III.
27
Marks
12
12
20
17537 EXT5
G Scheme
TOPIC 4] TV Transmitter and Receiver

Identify modulation technique used for audio and video signal
transmission
Distinguish between positive and negative modulation
Describe TV camera tube and colour picture tube
Explain the function of Color TV transmitter and receiver.
Contents:
4.1
[04 Marks]
Audio and Video signal transmission using AM and FM
modulation.
Positive and Negative modulation, Merits and Demerits of Negative
modulation.
4.2
[08 Marks]
Introduction to TV camera tube, principle and working of Vidicon
Plumbicon Solid State camera based on CCD.
Color Picture tube, principle and working of PIL Delta gun picture tube.
Trinitron
4.3
[08 Marks]
Block diagram of Colour TV transmitter.
Block Diagram and operation of color TV receiver (PAL D type)
Topic 5] Colour TV
Draw and explain PAL D Decoder
Explain the operation of different sections of TV receiver
Differentiate between NTSC,PAL and SECAM system
Explain HDTV, LCDTV and LEDTV
Contents:
5.1
[12 Marks]
Block
diagram
and
operation
of
of
PAL-D
decoder.
Construction, operation and applications of Yagi Uda Antenna.
Circuit diagram of chroma signal amplifier, Burst pulse blanking, Colour
killer control, Basic Circuit for Separation of U and V signals. ACC
Amplifier. Colour signal matrixing, RGB drive amplifier. EHT
generation: circuit explanation for line output stage using transistor or IC
in Colour TV.
5.2
[04 Marks]
5.3
09
20
12
20
HDTV: Development of HDTV, NHK MUSE System and NHK

Broadcast.
[04 Marks]
LCD/LED Technology: Principle and working of LCD and LED TV
systems.
28
17537 EXT5
G Scheme
Topic 6] Cable Television

6.1
6.2
List specifications of various components used in cable TV

Interpret the architecture of cable TV
Differentiate between MATV,CATV and CCTV
Describe working of dB meter and DTH system
[06 Marks]
Constructional details, working and radiation pattern of Dish antenna
Working principle of following components LNBC, Multiplexer,
Attenuators Connectors (two ways and three ways), Amplifier and cable.
[08 Marks]
MATV, CATV and CCTV.
Interpret the architecture of cable TV network.
Block diagram of dB meter with working principle.
Direct to Home System (DTH) Introduction and Block Diagram
Total
06
16
48
100
Practicals:
To develop following skills:
Analyze the parameters and identify faults in audio amplifier and colour TV receiver.
Trouble shooting of faults in audio amplifier and colour TV receiver.
Discriminate different sections of TV system.
Estimate cost of various TV system.
Motor Skills:
Draw and illustrate different sections of audio and video systems.
Test different sections of audio and video systems.
Measure various parameters of audio and video systems.
Install DTH system.
List of Practicals:
1. Trace and analyze voltage of Hi Fi amplifier system.
a) Trace the output stage of given Hi Fi amplifier system.
b) Voltage analysis of a given Hi Fi amplifier.
2. Fault Finding (three different faults) in a Hi Fi Audio amplifier:
a) By Signal injection method. b) Confirmation of faulty stage by voltage analysis
method.
3. Plot frequency response of
a) Graphic equalizer and
b) Filters used in graphic equalizer.
4. Draw and observe drive mechanism layout of CD player.
5. Trace: a) Chroma Section, b) Picture Tube, c) Video Amplifier,
6. Trace: a) Horizontal section b) Vertical section c) Power supply section of TV receiver
7. Voltage analysis of:
a) Chroma section, b) Picture Tube c) Video Amplifier,
29
17537 EXT5
G Scheme
8. Voltage analysis of:

a) Vertical Section b) horizontal section c) Power supply of TV receiver.
9. Fault finding in given Colour TV:
a) No color b) Red Colour only c) Blue color only d) Green color only.
e) Magenta color only f) Cyan only g) Yellow only h) No raster. No Sound.
10. Fault finding in given Colour TV:
a) Fault in HSYNC section. b) Fault in VSYNC section. c) Fault in SYNC separator. d)
Fault in video amplifier.
11. Trace the circuit layout of LED television receiver.
12. Trace the circuit layout of LCD television receiver.
Assignments:
1. To collect information about Set Top box used for Cable TV at home and Installation of
DTH System.
2. To estimate the cost and layout of Cable TV.
3. To collect information about LED and LCD display used in TV.
4. Visit to TV transmitter station and write report.
Learning Resources:
1) Books:
Sr.
Title
No.
Author
Publisher
01
Television & Radio Engineering
A.M Dhake
Tata McGraw-Hill
02
Modern TV Pratice (4th edition )
R.R Gulati
New age International
03
Television Engineering and

Video System
R.G Gupta
Tata McGraw-Hill
04
Audio Video Systems
R.G Gupta
Tata McGraw-Hill
Bernard Grob
Tata McGraw-Hill
Manohar Lotia
BPB Publication
05
06
Basic Television and Video

System
Modern CD Player Servicing
Manual
2) Websites:
http://en.wikipedia.org/wiki/Compact_Disc_player.
http://en.wikipedia.org/wiki/High-definition_television.
http://www.howstuffworks.com.
http://en.wikipedia.org/wiki/Backlight.
30
17537 EXT5
G Scheme
Course Name : All Branches of Diploma in Engineering & Technology

Course Code : EJ/EN/ET/EX/EV/IC/IE/IS/MU/DE/ME/PG/PT/AE/CE/CS/CR/ CO/CM/IF/
EE/EP/CH/PS/CD/ED/EI/CV/FE/FG/IU/MH/MI/TX/TC/DC/AU
Semester
: Fifth for EJ/EN/ET/EX/EV/IC/IE/IS/MU/DE/ME/PG/PT/AE/CE/CS/CR/

CO/CM/IF/EE/EP/CH/PS/AU and Sixth for CD/MH/IU/CV/FE/FG/MI/
ED/EI/DC/TC/TX
Subject Title : Behavioural Science

Subject Code : 17075
Teaching Scheme
Examination Scheme
TH
TU
PR
PAPER
HRS
TH
PR
OR
TW
TOTAL
01
--
02
--
--
--
25 #
25 @
50
Rationale:
With increased globalization and rapid changing business expectations, employers are
looking for wide cluster of skills to cater to the changing demand. Personality traits and soft skills
are playing a key role in a students career in this changing scenario. Corporate houses look for soft
skills that supplement hard skills.
Addition of behavioural science in curriculum is intended to enhance the efficiency of a
person so that he can contribute to overall growth of organisation. It aims at developing insight into
leadership, team building, motivation, interpersonal relationship, problem solving, decision making
and aspects of personality in a technicians profile. Addition of the topic of organizational culture
will further mould him/ her in the organisational role.
This subject of Behavioural Science provides a broad base in which a technician can
develop a successful career in the world of work.
General Objectives:
After studying this subject, the students will be able to:
1. Develop him/her as Team leader.
2. Use self-motivation and motivate others.
3. Build a team and develop team spirit among the team members.
4. Improve the interpersonal relationship skills.
5. Learn Problem solving and decision making skills.
6. Discuss a particular topic in a group and face the interview.
31
17075 EXT5
G Scheme
Learning Structure:
Application
Procedure
Principle
Concept
Self-development and organizational growth
Performing tasks effectively by implementing team spirit, defining problem
Goal achievements and result oriented work culture
Team building
Conflict resolution
Team development
Problem solving
Brain storming
Interpersonal relationship
Trial and error
Group Discussion
Leadership
Team spirit
Motivation
Vision
Team
Conflict
Organisation
Task or Goal
Problem
Facts
32
17075 EXT5
G Scheme
Theory:
Topic and Contents
TOPIC 1: LEADERSHIP
Contents:
1.1 Introduction Importance, examples of different types of leaders.
1.2 Meaning and Definition of Leadership.
1.3 Leadership qualities Confidence, Vision, Communication Skills, influencing
people etc.
1.4 Types of Leadership styles, their advantages and disadvantages Autocratic,
Democratic, Delegative, Bureaucratic and Laizze Fairie.
TOPIC 2: MOTIVATION
Contents:
2.1 Meaning and Definition of motivation.
2.2 Types of motivation.
2.3 Maslows Motivation theory.
2.4 Job characteristic model to enhance motivation.
TOPIC 3: TEAM BUILDING
Contents:
3.1 Definition of Team.
3.2 Difference between Group and Team.
3.3 Need for formation of good team (vision, trust, cooperation, initiative, etc.)
3.4 Approach to Team building (Personality based, activity based, skill based,
problem solving based, etc.)
TOPIC 4: CONFLICT RESOLUTION
Contents:
4.1 Definition of Conflict.
4.2 Types of Conflict Functional and Dysfunctional
4.3 Sources of Conflict Ego, Authority, Frustration etc.
4.4 Positive and Negative effects of conflicts.
4.5 Methods of Conflict resolution Compromising, withdrawal, forcing.
TOPIC 5: PROBLEM SOLVING AND DECISION MAKING
Contents:
5.1 Steps in Problem Solving.
5.2 Methods used for solving problems trial and error method, brain storming,
lateral thinking method.
5.3 Techniques used for Decision making- Decision tree, Decision Matrix, Mind
Mapping etc.
TOPIC 6: GROUP DISCUSSION AND INTERVIEW TECHNIQUES
Contents:
6.1 GROUP DISCUSSION
Objectives of Group Discussion (ability to work in team, speaking and
listening skills, leadership, creativity)
Does and Donts of Group Discussion.
How to conclude Group Discussion.
33
Hours
02
03
02
04
03
02
17075 EXT5
G Scheme
6.2 INTERVIEW TECHNIQUES

Types of Interviews. (patterned, stress, behavioural)
Dress Code, Body Language and Communication Skill.
Probable questions for Interview.
Telephonic or Video Interview.
Total
16
Practical:
Develop ability to find his strengths.
Select proper source of information.
Follow the technique of time and stress management.
Set the goal.
Motor Skills:
Follow the presentation of body language.
Work on internet and search for information.
Prepare slides / transparencies for presentation.
List of Practicals / activities:

1. Form a group of 4 or 5 students and discuss the topic Qualities of an effective leader. Each
group will prepare its list with justification to the entire class and write an assignment under
the guidance of subject teacher.
2. Form a pair of student and each one from pair will ask each other questionnaire on
motivation, self-motivation, experiences that motivated him or other which him for success
in the past and write an assignment under the guidance of subject teacher based on
discussion.
3. Form a group of 4 or 5 students and assign them a group activity such as making a shape
from match stick (50 to 100 match sticks) without guidance and without group discussion.
4. The group as in activity 3 will now perform the same activity. After group discussion and
under guidance of subject teacher, each student from a group will write an assignment for
both the activities and write their inferences with reference to group discussion, team
development, team building, etc.
5. Form a group of 8 to 10 student and arrange a group activity such as;
Industrial visit.
Visit to any historical place/fort/museum, etc
Housekeeping and cleaning of any laboratory/seminar hall for any function.
After the execution of activity student will write an assignment under guidance of teacher
keeping in mind individual role, purpose of activity, inter dependency of work or task,
coordination of person and task involved and final performance.
6. Write an assignment on interpersonal relationship and conflict management with students
personal experience of solving conflicts.
7. Form a group of 20 students and ask them to prepare a list of 8 to 10 problems affecting the
institute. Subject teacher should analyze one such problem on black board using Fish bone
technique with the participation of students. Students will write an assignment consisting;
Apparent problem statement.
Analysis of the causes.
34
17075 EXT5
G Scheme
Definition of real problem.

8. The subject teacher starts the session with Statement of the problem written on the black
board. After ensuring that all the participants are at the same level of understanding the
statement of problem, he initiates NGT (Normal Group Technique) to arrive at maximum
possible number of creative solutions.
Based on ranking matrix the group will arrive at feasible solutions and students will write an
assignment consisting of;
Problem Statement.
Model of problem solving.
List of creative solution suggested by participants.
Write the most feasible solution based on given criteria.
9. Form a group of 4 to 5 students and give them a topic for GD for 10 to 15 minutes. Teacher
should analyse GD on certain parameters and students will write an assignment on aspects
of GD and prepare a format (suggested or designed by teacher) which gives details of GD
carried out.
10. Arrange a guest lecture of H.R. Person from industry/expert in interview technique and
conduct mock interview of each student. Student should write a report on this activity.
11. Arrange a visit to industry and gather information about organisation, product, turnover,
work culture, vision/mission statement, quality policy, Corporate social responsibility etc
and write a report on it.
Note - Subject teacher shall guide the students in completing the assignments based on above
practicals.
Learning Resources:
Books:
Sr.
No.
Author
Name of Book
Handbook and assignment book on
Development of Life Skills-II
Principles of management and
organizational behaviour
Publication
MSBTE
Subject Experts-MSBTE
Dr. Kumkum Mukherjee
Dr.T.Kalyana Chakravarti
Dr.T.Latha Chakravarti
Soft Skills for Managers
Biztantra
Barun K Mitra
Personality Development and soft skills
Oxford University
Press
Priyadarshini Patnaik
Group discussion and interview skills
Foundation Books
35
Tata McGraw Hill

Education Pvt Ltd.
17075 EXT5
G Scheme
Course Name
Course Code
Semester
Subject Title
: Entrepreneurship Development and Project
Subject Code
: 17066

Teaching Scheme
Examination Scheme
TH
TU
PR
PAPER
HRS
TH
PR
OR
TW
TOTAL
01
--
02
--
--
--
--
25@
25
NOTE:
Two practical hours are for project
One theory and one tutorial hours are for Entrepreneurship Development (EDP). Twenty
five marks are for term work report prepared under EDP.
Rationale:
Globalization, liberalization & privatization along with revolution in Information
Technology, have thrown up new opportunities that are transforming lives of the masses. Talented
and enterprising personalities are exploring such opportunities & translating opportunities into
business ventures such as- BPO, Contract Manufacturing, Trading, Service sectors etc. The student
community also needs to explore the emerging opportunities. It is therefore necessary to inculcate
the entrepreneurial values during their educational tenure. This will help the younger generation in
changing their attitude and take the challenging growth oriented tasks instead of waiting for whitecollar jobs. The educational institutions should also demonstrate their uniqueness in the creation of
enterprising personalities in their colleges. This subject will help in developing the awareness and
interest in entrepreneurship and create employment for others.
General Objectives:
The students will be able to
1) Appreciate the concept of Entrepreneurship
2) Identify entrepreneurship opportunity.
3) Develop entrepreneurial values and attitude.
4) Collect and use the information to prepare project report for business venture.
5) Develop awareness about enterprise management.
36
17066 EXT5
G Scheme
Learning Structure:
Application
Procedure
Concepts and
Principles
Facts
A) Use basic concepts, principles & procedures related to

entrepreneurship
B) To expose students to real problems faced by entrepreneur
preferably with the help of case study
- Information gathering for

opportunity
- Product / Service
Finalization as Business
Opportunity
- Project report preparation &
Project execution
- Planning
- Resources,
Enterprise,
Budgeting
- Study modern trends
in business
- Financial
Statements, Budget
- Financial Resources
Entrepreneurial Process
Information Gathering
Opportunity Identification
Formulation of Business
Plan
- Running Enterprise
successfully
- Different Organization Structures of SSI

- Product Specifications, Product Cycle, Business
Opportunities, Project Implementation
37
17066 EXT5
G Scheme
Content:
Part A) Industrial Project
Following activities related to project are required to be dealt with, during this semester.
1. Form project batches & allot project guide to each batch. (Max. 4 students per batch)
2. Each project batch should select topic / problem / work by consulting the guide & / or industry.
Topic / Problem / work should be approved by Head of department.
3. Each project batch should prepare action plan of project activities & submit the same to
respective Guide
4. At the end of semester, each project batch should submit the action plan and abstract of the
project along with list of materials required if project involves fabrication or other facilities
required in other kinds of project.
5. Action Plan should be part of the project report.
Part B) Entrepreneurship Development
Theory:
Topic and Contents
Topic 1: Entrepreneurship, Creativity & Opportunities
Contents:
1.1 Concept, Classification & Characteristics of Entrepreneur
1.2 Creativity and Risk taking.
1.3 Business types and Reforms
1.4 SWOT Analysis
Topics 2: Information and Support Systems for Development of
Entrepreneurship:
Contents:
2.1 Information Sources: Information related to project, procedures
and formalities
2.2) Support Systems
1) Business Planning & Requirements for setting up an SSI
2) Govt. & Institutional Agencies (Like MSFC, DIC, MSME,
MCED, MSSIDC, MIDC LEAD BANKS) Statutory Requirements and Agencies.
Topics 3: Market Assessment and Product feasibility
Contents:
3.1) Marketing -Concept and Importance Market Identification,
3.2) Customer need assessment, Market Survey Product feasibility analysis
Topics 4: Business Finance & Accounts
4.1) Business Finance: Costing basics, Sources of Finance, Break
Even Analysis,
4.2) Business Accounts: Book Keeping, Financial Statements,
Financial Ratios and its importance, Concept of Audit,
Topics 5: Project Report Preparation
5.1) Business plan: Steps involved from concept to commissioning
5.2) Project Report
1) Meaning and Importance
2) Components of project report/profile
5.3) Project Feasibility Study:
1) Meaning and definition
2) Technical, Market, Financial feasibility
Topics 6: Enterprise Management And Modern Trends
6.1) Enterprise Management: 1) Essential roles of Entrepreneur in managing enterprise
38
Hours
03
03
02
03
03
02
17066 EXT5
G Scheme
2) Probable Causes Of Sickness

6.2) E-Commerce: Concept and process
6.3) Global Entrepreneur
Total
Tutorial:
Sr. No
1
2
3
4
16
Assignments
Assess yourself-are you an entrepreneur?
An Interview with an Entrepreneur.
Feasibility study of a product.
Prepare a Project Report for starting a small scale business.
FONT SIZE OF PROJECT REPORT CONTENTS BE AS FOLLOWS:

1. MAIN TITLE: 16 BOLD TIMES NEW ROMAN/ ARIAL
2. SUB TITLES: 14 BOLD TIMES NEW ROMAN/ ARIAL
3. RUNNING MATTER: 12 TIMES NEW ROMAN / ARIAL
Format of the Project report should be designed by the department.
Learning Resources:
1) Reference Books:
Sr.
No.
1
2
3
4
Name of Book
Entrepreneurship
Entrepreneurship 2/e
Entrepreneurship and
Small Business
Entrepreneurship
Development
Poornima M.
Charantimath
Entrepreneurship
Development
Author
Publisher
Trehan
Rajeev Roy
Dream Tech Press

Oxford University Press
Schaper
Wiley India Publication
Colombo plan staff college

for Technical education.
Entrepreneurship
Development of Small
Business Enterprises
Tata Mc Graw Hill Publishing

co. ltd. New Delhi.
E. Gorden
K.Natrajan
Himalaya Publishing.
Mumbai
Pearson Education
2) VIDEO CASSETTES
No.
1
2
3
SUBJECT
Five success Stories of First
Generation Entrepreneurs
Assessing Entrepreneurial
Competencies
Business Opportunity Selection and
Guidance
Planning for completion & Growth
Problem solving-An Entrepreneur skill
SOURCE
EDI STUDY MATERIAL
Ahmedabad (Near Village Bhat , Via Ahmadabad
Airport & Indira Bridge), P.O. Bhat 382428 ,
Gujrat,India P.H. (079) 3969163, 3969153
E-mail :
ediindia@sancharnet.in/olpe@ediindia.org
Website : http://www.ediindia.org
39
17066 EXT5
G Scheme
Course Name : Electronics Engineering Group

Course Code : ET/EJ/EN/EX/IE/DE/ED/EI
Semester
: Fifth
Subject Title : Professional Practices-III

Subject Code : 17067
Teaching Scheme
Examination Scheme
TH
TU
PR
PAPER
HRS
TH
PR
OR
TW
TOTAL
--
--
03
--
--
--
--
50@
50
Rationale:
Most of the diploma holders are employed in industries. Due to globalization and
competition in the industrial and service sectors the selection for the job is based on campus
interviews or competitive tests.
While selecting candidates a normal practice adopted is to see general confidence, ability to
communicate and attitude, in addition to basic technological concepts.
The purpose of introducing professional practices is to provide opportunity to students to
undergo activities, which will enable them to develop confidence. Industrial visits, expert lectures,
seminars on technical topics and group discussion are planned in a semester so that there will be
increased participation of students in learning process.
Objectives:
To develop the following skills:
1. Analyze the information received from different sources.
2. Prepare report for given topic.
Motor Skills:
1. Present given topic in a seminar.
2. Interact with peers to share thoughts.
3. Prepare a report on industrial visit, expert lecture.
40
17067 EXT5
G Scheme
Learning Structure:
Application
Procedure
Develop confidence to face interview through presentation of self
Method of preparing portfolio and

steps to present self
Principles of oral and written

communication
Concept
Facts
Job opportunity, Job Profile
41
17067 EXT5
Activity
G Scheme
Name of the Activity
Hours
Industrial Visits
Structured industrial visits be arranged and report of the same should be
submitted by the individual student, to form a part of the term work.
The industrial visits may be arranged in the following areas / Industries.
1
Satellite earth station
Radar Establishment
Mobile Telephone Office
Any other relevant area
16
Lectures by Professional / Industrial Expert to be organized from the

following areas.
Mobile Communication
Software Debugging
Fuzzy logic and Neural network
Recent trends in digital communication
Nanotechnology
Carrier guidance and interviewing techniques
Self- employment
Blue tooth technology.
Any topic related to social awareness
08
Information Search:
3
Students should prepare report as a part of term work of searching and
06
collecting the information regarding their final project/industrial project

Seminar
4
Student will deliver a seminar on technical topic. The topic will be on his
10
project or new trends in technology or the subject of the Sixth semester

Group Discussion
The students should discuss in a group of six to eight students and write a
5
08
brief report on the same as a part of term work.

The Faculty may suggest the topic for group discussion
Total
42
48
17067 EXT5
G Scheme
Industrial Training (Optional)
Students who have completed industrial training in summer vacation after 4th Semester will be
granted exemption for activities related to topic 1 to 4.
These students shall submit report of Industrial training signed and certified by authorities from
Industry. Student will give seminar on industry training attended by him.
Evaluation will be done on seminar and report submitted by student.
43
17067 EXT5
G Scheme
Course Name
: Diploma in Instrumentation / Diploma in Instrumentation & Control /

Diploma in Industrial Electronics
Course Code
: IC/IS/IE
Semester
: Fifth
Subject Title
: Control System
Subject Code
: 17538

Teaching Scheme
Examination Scheme
TH
TU
PR
PAPER
HRS
TH
PR
OR
TW
TOTAL
03
--
02
03
100
50#
--
25@
175
NOTE:
Rationale:
Modern civilization is an indication of human Endeavour to control natures forces and to
harness them for the benefit to mankind. The laws of nature are such that everything in this
universe is controlled. Control is the process of causing a system variable to take some desired
value, known as reference value.
A control system consists of several elements or components connected and operated in
such a way as to achieve a desired control in a specific domain of operation of the system. This can
be as simple as making the temperature in a room stay at 21C or as complex as manufacturing an
integrated circuit or guiding a spacecraft to Jupiter. In general, all the elements necessary to
accomplish the control objective are described by the term control system.
This subject is beneficial for process control variation in any process control industry which
equips the students for maintenance and quality analysis.
General Objectives:
The student will be able to:
1. Learn the classifications of control system.
2. Understand Steady state, time response, and frequency response analysis.
3. Learn Stability analysis with RH criteria and Bode plot.
4. Understand Servo system and its application.
13
17538 IE5
G Scheme
5. Learn the Process control system and controllers.

Learning Structure:
Application
Procedure
Principle
Concept
Facts
Control system mechanism for various process applications. Understanding

controller actions for process control implementation.
Obtaining 1ST
And 2ND
Order system
time
response
Stability
analysis with
R-H criteria
Bode plot
for stability
analysis
Observation
of output
responses of
electronic
controllers
Working of
stepper
motor and
servomotors
Block
diagram
Representati
on and
reduction
techniques
Poles and
zeros
Principle of
stability
Principles of
process
controllers
Servo system
principle
Transfer
function of
control
system
Time
response,
standard test
inputs
Frequency
Response
specifications,
s- Plane
Controller
actions, P,
PI, PID
controllers
Servo
system,
AC and
DC servo
system
Open loop & closed loop control systems, Linear & nonlinear control system,
Laplace Transform
14
17538 IE5
G Scheme
Theory:
Topic and Contents
Topic 1: Introduction to the control system
Develop transfer functions
Differentiate between 1st& 2nd order of system
Develop and solve block diagram of control system
Contents:
1.1
[8 Marks]
Control system: Definition and practical examples
Classifications: Open loop & closed loop systems definition, block
diagram, practical example and Comparison; Linear and non linear
system; Time variant and time invariant systems.
Laplace Transform: Laplace Transform for standard functions
Transfer function: Definition, Derivation of transfer functions for
closed loop & open loop control system, Differential equations &
Transfer functions of R-C and R-L-C electrical circuits.
1.2
[8 Marks]
Order of a system: Definition 0, 1, 2 order system, standard
equations, simple numericals
Block diagram reduction technique: Need, reduction rules, numerical
problems.
Topics 2: Time response analysis
Differentiate between transient and steady state responses
Appreciate the importance of standard inputs and apply them in
analysis of control system
Represent poles and zeros in s-plane
Analyze 1st& 2nd order control system for step input
Contents:
2.1
[12 Marks]
Time domain analysis: Transient and steady state response
Standard test inputs: Step, ramp, parabolic & impulse: Need of them,
significance, and corresponding Laplace representation
Poles& zeros: Definition, S-plane representation
First order control system: Analysis for unit step input, Concept of
time constant
Second order control system: Analysis for unit step input,
Concept, definition & effect of damping
2.2
[12 Marks]
Time response specifications (no derivations)
Tp, Ts, Tr, Td, Mp, ess; numerical Problems
Steady state analysis: Type 0,1,2 systems, Steady state error & error
constants, numerical Problems
Topics 3: Stability
Hours
Marks
08
16
12
24
08
16
Appreciate the importance of stability

15
17538 IE5
G Scheme
Analyze different types of stability

Apply Rouths stability criterion for stability analysis
Contents:
Stability : Definition of stability, Analysis of Stable, unstable,
critically stable & conditionally stable system, Relative stability, Root
locations in S-plane for stable and unstable systems.
Rouths stability criterion: Different cases & conditions (statement
method), Numerical Problems.
Topics 4: Frequency Response
List frequency response specifications
Draw Bode plot
Analyze stability from Bode plot
Contents:
4.1.
Frequency response analysis: Introduction, advantages &
disadvantages; Frequency response specifications.
[4 Marks]
08
10
06
16
06
18
4.2. Bode plot:

[6 Marks]
Need of Bode plot
Straight line Magnitude plot
Straight line Phase angle plot
Bode plot for gain K, poles & zeros at origin, 1ST order poles system
(1/(as+c)) & zeros
Analyze stability from Bode plot using Gain margin and Phase margin.
Topics 5: Process Control and Control actions
Differentiate between different types of Control actions such as P,I & D
Describe composite controllers such as PI, PD, PID controllers
Contents:
Process control system: Block diagram & explanation of each block.
Control actions:
Discontinuous modes: ON-OFF controllers: equation, neutral zone
Continuous modes: PROPORTIONAL controllers (offset,
proportional band), INTEGRAL & DERIVATIVE controllers:
o/p equations, corresponding Laplace Transforms, Response graph
of P,I & D controllers
Composite controllers: PI, PD, PID controllers- O/P Equations,
Response, Comparison, Application, Electronic op-amp based
circuits
Topics 6: Servo System
Define servo systems
Draw the constructional sketches of servo components. servomotor
16
17538 IE5
G Scheme
Contents:
6.1.
[4]
Servo system: Definition, block diagram
AC & DC servo systems: Concept and principle, Comparison,
schematic diagram.
6.2. Servo components:
[14]
Draw, describe the working and state the applications of following
Potentiometer as error detector
Synchro as error detector
Stepper motor- PM & variable reluctance type, comparison of stepper
motor with DC servo motor
DC servo motor- characteristic, difference from a normal DC motor
AC servo motor- characteristic, difference from a normal 2 phase
induction motor,
Total
48
100
Practical:
Reading and interpretation of the graph.
Interpretation of the results from observations and calculations.
Use of these results for analyzing the problems
Motor Skills:
Proper handling of instruments.
Measuring physical quantities accurately.
Observe the phenomenon and to list the observations in proper tabular form.
Adopt proper procedure while performing the experiment.
List of Practicals:
1. Measurement and control of error of angular position of DC Servo system.
2. Measurement and control of error of angular position of AC Servo system.
3. Characteristics of potentiometer as error detector.
4. Characteristics of Synchro as error detector.
5. Generate the pulses and measure the speed of stepper motor.
6. Step response of first order R-C circuit.
7. Step response of first order R-L-C circuit.
8. Type 0 system analysis for step, ramp & parabolic inputs.
9. Measurement & control of temperature (or any other parameter) with on-off controller.
10. Measurement & control of temperature (or any other parameter) with Proportional
controller.
11. Measurement & control of temperature (or any other parameter) with PI controller.
12. Measurement & control of temperature (or any other parameter) with PID controller.
17
17538 IE5
G Scheme
Learning Resources:
1. Books:
Sr.
No.
Author
I.J. Nagrath & M. Gopal
Control System Engineering
McGraw-Hill
Anand Kumar
Control Systems
PHI
K.R.Varmah
Control Systems
McGraw-Hill
K. Ogata
Modern Control Engineering
PHI
C. D. Johnson
Process Control
Instrumentation Technology
Prentice hall
Title
Publisher
2. Websites:
www.servosystems.com
en.wikipedia.org/wiki/Servomechanism
en.wikipedia.org/wiki/PID_controller
18
17538 IE5
G Scheme
Course Name
: Diploma in Industrial Electronics
Course Code
: IE / IU
Semester
: Fifth for IE and Sixth for IU
Subject Title
: Industrial Electronics and Applications
Subject Code
: 17541

Teaching Scheme
Examination Scheme
TH
TU
PR
PAPER
HRS
TH
PR
OR
TW
TOTAL
03
--
02
03
100
50#
--
25@
175
NOTE:
Rationale:
Different power devices play vital role in the power generation and transmission as well as
in industrial applications. This subject deals with power converters and power control and advanced
electronics applications.
The subject includes applications of power devices in controlling different parameters in
industrial automation such as converters, inverters, a. c. stabilization and power control circuits and
various applications.
General Objectives:
Students will be able to
1) Realize applications of various power devices
2) Understand the operation of different power converters, inverters, choppers & regulators.
3) List applications of converters, inverters, choppers & regulators
4) Select proper power device and related power controllers for a specific application.
19
17541 IE5
G Scheme
Learning Structure
Application
Procedure
Principle
Concept
AC/DC power supply, automation industries and resistance welding
UPS, SMPS,
Stabilizer
VI
characteristics
Operation of
Industrial
Circuits
Advance Inverter
(DC to AC)
Operation of
different choppers
& Inverters.
Advance
Choppers (DC to
DC)
Line contactor,
synchronous
weld control
Time delay
circuits
Advance Power
Devices SIT, FCT,
MCT
Fact
Power devices, basic choppers & inverters
20
17541 IE5
G Scheme
Contents: Theory
Topics and Contents
Topic 1: Modern Power Devices & Protection Circuits
Hours
Marks
08
16
08
16
Specific Objectives :
Realize construction and working of different power devices
Classify different power devices
Identify proper power devices for particular applications
Contents :
Power devices: SIT, MCT and FCT.

Symbol, construction, working and V-I characteristics
Need of Protection Circuits for power devices
Voltage suppression diodes, reverse recovery time.
Snubber Circuits:- Operating principle & need of Snubber circuits.
Over current Protection Circuits.
Over voltage Protection Circuits.
di/dt protection circuit.
dv/dt protection circuit.
Series & parallel connections of SCR.
Need of series &parallel connection of SCR, equalising circuit
,protection circuit.
Topic 2: Advanced Choppers

Realize the working of different chopper with associated
waveforms
Classify choppers.
Identify proper chopper.
Contents :
Review of basic step up & step down Choppers (no marks)
Effect of duty cycle on output voltage.
Classification of choppers on the basis of Quadrant, Circuit diagram
using SCR and MOSFET, mode of operation, wave forms
Single quadrant (class A ,class B)
Two Quadrant (class C, class D) and
Four Quadrant (class E)
Jones Chopper, Morgans Chopper
Circuit diagram using SCR, working, wave forms.
21
17541 IE5
G Scheme
Topic 3: Advanced Inverters

Realize the working of different Inverters & cycloconverter with
associated waveforms
Classify different Inverters & cycloconverters.
Identify proper chopper & inverter
Contents :
Review of basic Inverter(no marks)
Types based on energy source: Voltage Source , Current Source
Inverter
Types based on configuration: Bridge Inverter: Half Bridge , Full
Bridge & Push pull Inverter with R & RL load
Circuit Diagram ,Working and Waveforms
Series inverter , parallel inverter-circuit diagram,working,waveform.
Mc Murray Inverter, Mc Murray Bed Ford Inverter
Circuit diagram, Working
Resonant Inverters,
Output voltage & Harmonics Control using
PWM control methods -block diagram & waveform
Cycloconverter-single phase cycloconverter.
10
20
08
20
Topic 4: AC voltage stabilizer

Realize concept of voltage stabilization
Classify different stabilizer
Specify different stabilizer
Compare different stabilizer
Contents :
Need of Stabilizer.
Types Relay type , Servo type,
Tap changing & Phase control, Circuit diagram, Operating principle,
Working, advantage, disadvantage, and applications.
Specifications.
Concept of Switch Mode Power Supply (SMPS).
Types of SMPS:- Isolated & Non Isolated
Isolated SMPS: Principle, operation, applications, advantages and
disadvantages.
Non Isolated SMPS: Principle, operation, applications, advantages
and disadvantages.
22
17541 IE5
G Scheme
Topic 5: Uninterruptable Power supply

Know Block diagram & functions of different stages in UPS

Classify different UPS
Specify different UPS
List different applications of UPS
Contents:
Need of UPS, Basic block diagram, operating Principle
Classification
ON-line - UPS
OFF-Line UPS
Line Interactive UPS
Block diagram, Working principle, advantages, disadvantages
UPS Specifications
Input Voltage Range, DC Voltage Range, Transient Response,
Response Time, Total Harmonic Distortion, output frequency, output
waveforms, Transient Recovery, load power factor and types of
Protection circuit.
Battery parameters-back up time, power rating, transfer time. Types
of protection circuits.
Topic 6 : Resistance Welding
Draw Block diagram & state functions of each block of resistance
welding system.
Contents :
Principle of Resistance Welding
Types of Resistance Welding
Spot , Projection , Butt , Seam & Pulsation type welding
AC Resistance Welding, Line contactor, synchronous weld control
Energy Storage Welding: Capacitor energy storage welding -Block
diagram, Working, advantages, disadvantages.
Sequential resistance welding using sequence timer
Labeled block diagram, function of each block and applications
TOTAL
06
12
08
16
48
100
Practical:
Skills to be developed
1. Select proper power device for specific application
2. Identify the faults and location.
Motor Skills:
1. Accuracy in measurement of different parameter
2. Testing
23
17541 IE5
G Scheme
List of Practicals:
1. Verify the over voltage protection circuit using zener diode.
2. Observe and measure the output voltage and duty cycle for step-up chopper.
3. Observe and measure the output voltage and duty cycle for step-down chopper.
4. Observe and measure the output voltage and frequency for series inverter.
5. Observe and measure the output voltage and frequency for parallel Inverter.
6. Observe and measure the output voltage and frequency for single phase cycloconverter.
7. Measure the output voltage for servo type voltage stabilizer for different values of a c
input voltage.
8. Measure the output voltage for relay type voltage stabilizer for different values of a c
input voltage.
9. Measure different voltages at different test points and verify specifications with the
datasheet of the manufacturer for UPS. (Input voltage, output voltage, output frequency,
transient response, back up time)
10. Measure different voltages at different test points and verify specifications with the
datasheet of the manufacturer for SMPS. (Input voltage, output voltage, output frequency)
Learning Resources:
Books:
Sr.
No
Title
Author
Publisher
Power Electronics and its

Application
Alok Jain
Pennom International
Industrial & Power Electronics
G.K. Mittal
Khanna Publisher
Industrial Electronics & Control
Bhattacharya,
S.Chatterjee
Tata McGraw Hill
Power Electronics
Singh
Tata McGraw Hill
Industrial Electronics
(ATEST Lab Manual)
Zabar
Tata McGraw Hill
Power Electronics
Muhammad H. Rashid
PHI publication
24
17541 IE5
G Scheme
Course Name
: Diploma in Industrial Electronics
Course Code
: IE / IU
Semester
: Fifth for IE and Sixth for IU
Subject Title
: Advanced Industrial Electronics
Subject Code
: 17542

Teaching Scheme
Examination Scheme
TH
TU
PR
PAPER
HRS
TH
PR
OR
TW
TOTAL
03
--
02
03
100
--
--
25 @
125
NOTE:
Rationale:
With advancement of technologies, Industries had undergone revolution. To cope up with
the modern industries diploma engineers are to be exposed to the modern techniques .Advanced
Industrial Electronics subject is classified under technology group. The subject enables the student
to learn basic facts, concepts, principles, procedures and safety used in modern industries.
Advanced Industrial Electronics explain the operation of NDT techniques and their applications. It
highlights the concepts in modern machining techniques. This subject covers various testing
techniques used for engineering materials.
Objectives:
The students will be able to 1) Understand operation of modern machinery.
2) Learn Industrial safety procedures.
3) Understand non destructive testing of materials and applications of non- traditional
machining in automation.
25
17542 IE5
G Scheme
Learning Structure
Application
Procedure
Cold Welding, Flaw

Detection, Ultrasonic
Soldering , Cleaning,
Heating, Level
Measurement, Crack
Detection in materials,
Safety
procedures
Safety
measures
Safety
Fact
Surface hardening of
steel, Annealing,
Brazing, Pre- heating of
plastic perform, glueing,
sewing of plastic, in
food industries
Pulse- Echo method,

Through transmission
method of ultrasonic
testing. Dry & wet
method of magnetic
crack detection
Ultrasonic flaw detection

& magnetic crack
detection
Principle
Concept
Wire cut EDM, Drilling

of microhole, internal
thread cutting , Helical
profile cutting,
Non distructive
testing methods
EDM & CNC
Modern machining
techniques
Ultrasonic properties,
materials & their
properties
26
Energy sources
& computer
Induction Heating
& Dielectric
heating
High frequency
heating techniques
Eddy current &

high frequency
effect
17542 IE5
G Scheme
Contents: Theory
Contents
Topic 1: Concept of Modern Industry and Industrial Safety
Know importance of modern industry
know Industrial safety and precautions
Contents
Concept and Information of modern industry
Problems in traditional industries
Advantages of modern industry over traditional
industry
Industrial Safety
Causes of accidents
Types of accidents
Accident prevention
Safety procedure
Topic 2: Ultrasonic Testing
Learn different NDTs
Identify flaws in material
Learn ultrasonic applications
Contents :
Review of NDT
Different NDT methods:
Liquid penetrant test, ultrasonic testing, magnetic particle testing,
radiography, eddy current testing
Review of piezoelectric and magnetostriction effect for ultrasonic
generation
Generation of Ultrasonic
Mechanical methods, thermal methods, modern methods (Principle of
operation only)
Transistorized magnetostriction oscillator circuit diagram, working,
advantages and disadvantages
Ultrasonic flaw detection
Pulse-echo method, through transmission method- block diagram,
explanation, advantages and disadvantages.
Different types of probes& materials used in testing( quartz, ceramic,
lithium sulphate)
Construction of Normal angle and TR probe Couplants.
Applications of Ultrasonic:
Cold welding, Ultrasonic cleaning, ultrasonic soldering, ultrasonic
heating, Block diagram and explanation
Thermo-acoustic and electronic-acoustic method
Ultrasonic level measurement
27
Hrs.
Marks
06
12
08
20
17542 IE5
G Scheme
Topic 3: Magnetic Crack Detection

Identify the material and Magnetization technique
Classify magnetization methods as per type of crack
Use of dry and wet inspection media method
Contents:
Principle of magnetic crack detection.
Materials used in magnetic crack detection

ferromagnetic material, inspection media
Ferromagnetic material powder (non- fluorescent, fluorescent).
Orientation of magnetic field

Longitudinal magnetization (Principle using bar magnet)
Coil shot method, yoke method, torroidal method.
10
20
Circular magnetization
Principle using circular magnet
Headshot method, central conductor method and prod magnetization
method.
Localized magnetization using Torroid method, prod magnetization,
horse- shoe magnet method.
Types and amount of magnetizing current used for magnetization
Types of inspection media dry and wet method (magnaflux and

magnalo method) with advantages and disadvantages
Need of demagnetization, techniques used for demagnetization.
Techniques of recording results: Transparent plastic tape, strippable

lacquer film
28
17542 IE5
G Scheme
Topic 4: Modern Manufacturing Machines

Know non-traditional machining techniques
Know electronic concepts in EDM and CNC machine.
Contents
1 Concept of non-traditional machining and mass Production

techniques.
Introduction to thermal, electro-thermal, Chemical, electro-chemical,

mechanical type NTM
Electro-thermal type NTM - EDMPrinciple of EDM , Basic set up of EDM

Subsystems used in EDM set up such as servomotor, high pressure
pump, filter, pressure-gauge, dielectric fluid, dc supply and electrodes
(tools).
DC supply- DC relaxation oscillator and pulse generator.
Materials used for electrode & properties of dielectric fluid.
Basic block diagram of servomechanism.
Advantages & disadvantages of EDM.
Applications-drilling of microhole, wire cut EDM, internal thread
cutting, helical profile cutting(diagram & explanation)
Introduction to NC, CNC , DNC, CIM system

Block diagram & explanation of NC,CNC,DNC,CIM
Input media used in NC
Classification of CNC machines
Open loop and closed loop
Absolute and incremental system
Analog and digital system
Straight-line, contouring path system.
Position and velocity feedback used in closed loop system.
Basic principles of manual part programming
Use of G code and M code used in part programming
Concept of computer aided part programming, advantages of
computer aided part programming
29
08
16
08
14
17542 IE5
G Scheme
Topic 5: RF Heating
Realize high frequency heating
Know different heating techniques
Know different applications of induction and dielectric heating
Contents:
High frequency heating
Concept of different heating techniques- Induction heating, Dielectric
heating, IR heating, Microwave heating.
Introduction to induction heating- Principle of induction heating, basic
set-up of induction heating.
Block diagram and explanation of induction heating.
Oscillator circuit used in induction heating system circuit diagram,
working, frequency range.
Application of induction heating-Surface hardening of steel,
Annealing, brazing and other applications.
(Block diagrams and explanation)
Advantages and disadvantages of induction heating.
Introduction to dielectric heating-Principle of dielectric heating, Block
diagram and explanation of dielectric heating, dielectric losses,
electrode connection to tank circuit.
Applications of dielectric heating-Preheating of plastic perform, wood
Gluing, Sewing of plastic, In food industries, In medical industries
Advantages and disadvantages of dielectric heating.
Comparison of dielectric and induction heating.
Total
08
18
48
100
Practical:
Skills to be developed
1. Select proper NDT method
2. Operation of Machinery.
Motor Skills:
1. Identify size and location of fault in materials.
2. Use of modern machinery in automation.
List of Practicals:
1) Find the flaws in the given material using pulse echo method for ultrasonic flaw detection.
2) Measurement of liquid level using ultrasonic technique.
3) Demonstration of different industrial techniques used in Magnetic crack detection for
surface and sub surface crack detection
30
17542 IE5
G Scheme
4) Demonstration of EDM process.

5) Demonstration of wire cut EDM.
6) Demonstration of NC/CNC machines.
7) Measure the rise in temperature of conducting material using Induction heating system.
8) Measure the rise in temperature of dielectric material using Dielectric heating system.
9) Report on automation industry visit.
Learning Resources:
Books
Sr.
No
1
2
3
Title
Author
B.S. Pabla , M.Adithan
CNC Machines
Baldev Raj, T. Jaykumar

M. Thavasimutha
S. K. Bhattacharya, S.
Chatterjee
Practical Non-destructive
Testing
Industrial Electronics &
Control
Industrial & Power
Electronics
Publisher
New Age International Pvt.
Ltd.
Narosa Publishing House
Tata McHill Publishing Co.
Khanna Publication
G. K. Mittal
HMT
Production Technology
Tata McHill Publishing Co.
T.R. Banga, S.C. Sharma
Industrial Organization &

Engg. Economics
Khanna Publication
31
17542 IE5
G Scheme
Course Name
: Diploma in Electronics and Video Engineering
Course Code
: EV
Semester
: Fifth
Subject Title
: TV Receiver
Subject Code
: 17547

Teaching Scheme
Examination Scheme
TH
TU
PR
PAPER
HRS
TH
PR
OR
TW
TOTAL
03
--
02
03
100
--
--
25@
125
NOTE:
Rationale:
Television Receivers subject mainly concerns with continuously changing technology for
different types of television receivers are available in market like CRT, LCD, PLASMA and LED.
Depending on the technology the resolution of the reception varies.
The topic Colour TV receiver deals from basics of Colour TV receivers to all the new
development in television engineering. Students will learn and gain knowledge about the working
of different sections (tuner, audio and video amplifier, luminance and chrominance signal flow and
picture display methods) of TV Receivers. Students get involved practically to diagnose faults and
rectify them in Television Receiver, for different stages of Colour TV receiver (PAL System).
The topics Displays deal with different types of TV receiver display methods and role of
microcontroller in Television system.
To understand these subject students should know the Basic of Electronics, basic
communication systems and transmission of Television signals.
Thus subject matter will make the student fully contented with the knowledge of TV
receiver repairs and maintenance.
General Objectives.
Students will be able to:
1. Understand the process of receiving and reproducing sound and picture in colour television
receiver.
2. Understand the concept of troubleshooting at different stages of TV receiver.
3. Align IF section of TV receiver.
4. Diagnose and rectify faults of the common types cropped in every stage of a colour
television set.
25
17547 EV5
G Scheme
Learning Structure:
Applications
Procedure
Use the knowledge of Installation, Testing and troubleshooting for repair and
maintenance of Television Receivers.
Study of VIF stage, sound section, vertical and horizontal sections, PAL decoder,
SMPS and picture tube of TV receiver.
Voltage and waveform analysis for various stages of TV receiver.
Study how to Align various stages of TV receiver.
Principle
Principles of Superhetrodyne in TV receivers, SAW filter, synchronous

demodulation, sync pulse separation, comb filter and notch filter, SMPS in TV,
Antenna gain and band width
Concept
Mixing of different colour light in different TV Picture tubes, Remote control.

LCD, LED, 3D Effect and there application in TV receivers.
Fact
Composite video signals, Light theory, Electromagnetic wave propagation,

Different RF tuner, Intermediate Frequency, TV Signal Transmission,
AGC,Frequency Tuning for proper signal reception, Luminance and
Chrominance Signals, Different types of TV Receivers
26
17547 EV5
G Scheme
Topic and Contents

Topic 1] Colour TV Receiver
Understand requirements for Colour TV.
Describe how sound and picture are received using typical block diagram
of a receiver sets.
Contents:
Block Diagram of Colour TV receiver and function of each block.
Hyper Band tuner: Block diagram and working only with varicap tuning,
Band switching, frequency synthesizer tuning.
SAW filter: Construction of SAW filter, function, advantages and
disadvantages.
VIF stage: Block diagram and response curves for CTV and function of
each block.
Schematic diagram of VIF IC: CA7611/ CA 7607 and its working.
Need of AGC and AFT: Requirement of AGC in TV, Block schematic of
AFT
Generation of sound IF: Schematic diagram of Sound section IC 1190, its
function.
Topic 2] Luminance and Chrominance Processing
Explain the working principles of a colour decoder:
State function of Chrominance and Burst gate amplifiers
Explain working of Phase detector, Colour killer
Circuit diagram of Luminance signal processing: Circuit diagram of

Luminance signal processing and explain its working.
Block Diagram of PAL decoder: Block diagram of PAL Decoder and
Function of each block.
Adder and Subtractor circuit: Use of Adder and Subtractor circuits to
generate U and V signals
Chroma delay line: Requirement, Construction and working.
ACC Amplifier circuit, Ident and Colour Killer circuit :Circuit diagram
of ACC amplifier, its working. Diagrams of Ident and colour killer
circuits and their function
Need of Reference Oscillator and its circuit: Circuit of reference
oscillator and its working, its need in TV receiver.
27
Hours
Marks
10
24
12
24
17547 EV5
G Scheme
Topic 3] Sweep Section

Explain separation of horizontal and vertical sync pulses
Explain amplification method of H and V sync pulses
Use of AGC.
Need of power supply for TV
3.1 Sync separator circuit
[14 Marks]
Circuit of Sync separator, its working with the help of block diagram.
Vertical-Output amplifier circuit and its working.
Horizontal-Output amplifier circuit and its working.
Block diagram of sweep section
Block diagram of Sweep Section and function of each block.
Schematic Diagram of IC7609 and its function.
3.2 Power supply section.
[08 Marks]
EHT Generation Diode split Technique
Schematic diagram of EHT generation and its working
SMPS
Block Diagram, Circuit of forward and reverse type SMPS and their
merits and demerits.
Push-Pull SMPS block diagram explanation.
Topic 4] Micro Controller Based TV
Understand advance TV systems.
Understand characteristics and requirement of remote control system in
TV.
Contents:
Role of microcontroller in TV: Use of Microcontroller in TV Receiver.
Block diagram of microcontroller based TV: Block diagram of
microcontroller based TV and its working.
Remote control System: Purpose of remote control system in TV. Its
advantages and disadvantages, Draw the block diagram of Remote
Transmitter and Receiver and its functions.
Topic 5] TV Display Methods
Explain CRT display methods
Explain working of LCD and LED TV.
Explain working principle of projection TV.
Contents:
Trinitron Picture Tube: Working of Trinitron picture tube with diagram,
characteristics of Trinitron picture tube.
Plasma TV: Formation of picture pixels, characteristics, features of
Plasma TV, controls available in Plasma TV.
LCD and LED TV: Orientation of liquid crystals to form matrix of
picture pixels, Methods of charging.
Three dimensional (3D) TV : Concept of 3D TV,The techniques
developed to create a 3D effect, Stereoscopic effect with the aid of
special glasses, Auto stereoscope
Total
28
10
20
06
12
10
20
48
100
17547 EV5
G Scheme
Practical:
Intellectual skills:
1. Select measuring instruments on the basis of range, least count, precision and accuracy
required for measurement.
2. Record and analyze the observations.
3. Interpret the results from observations and calculations.
Motor skills:
1. Proper handling of instruments.
2. Measuring voltages and current at different stages accurately.
3. Observe the phenomenon and to list the observations in proper tabular form.
4. Follow proper procedure while performing the experiment.
List of Experiments:
(For class size 60, batch size 20 experiments shall be conducted in cyclic order with group of 4 to 5
students)
1.
To identify different sections and draw layout of IC based color TV receiver.
2.
Testing of special components used in TV Receivers.

a. SAW filter.
b. EHT transformer
c. Yoke
d. Y delay line
e. Chroma delay line
f. Convergence magnet.
g. Degaussing coil. *PTC
h. Tuner programming circuit
i. CRT base
j. Hyper tuner.
3.
To observe the symptom, do logical analysis and rectify fault in Tuner and VIF stage.
SymptomsSnowy Raster
a. Excessive Snow
b. No Raster
c. Only one or two bands (VL/VH/U) are in Working.
d. Plain Raster
4.
Alignment of SIF and VIF.
5.
To observe the symptom, do logical analysis and rectify fault in Chroma stage.
Symptoms a) Wrong Colour b) Excessive Tint c) No Colour Variation d) No Colour
6.
To observe the symptom, do logical analysis and rectify fault in Luminance and picture tube.
Symptoms - Only colour present Luminance absent.
- Excessive colour (R or G or B) with reference line.
7.
To observe the symptom, do logical analysis and rectify fault in Luminance and picture tube.
Symptoms-- Any primary colour missing.
- weak luminance/defocus picture (picture tube screen/focus control circuit)
29
17547 EV5
G Scheme
8.
To observe the symptom, do logical analysis and rectify fault in Sweep section.
Symptoms-- No raster (H-Drive)
H - line (fault no. 1)
V - line
V- Blanking visible.
9.
Installation of pattern generator for different patterns in TV receiver. Understand the

Significance of each pattern
10. To observe the symptom, do logical analysis and rectify fault in microcontroller based TV
Symptoms - TV remains in stand by mode. - Relay, Relay driver faulty.
11.
To observe the symptom, do logical analysis and rectify fault in microcontroller based TV
Trouble shooting in Remote Control Circuit.
Inoperative Remote Control TX / RX/ IR faulty.
12.
White balance adjustment using remote control and remote operation.
Learning Resources:
1. Books:
Sr.
No.
Title
Author
Publisher
New Age International (P)
Limited
New Age International (P)
Limited
Colour Television Principles

and Practice
R.R.Gulati
Morden Television Practice
R.R.Gulati
Television Engineering
Arvind Dhake
Tata Mc Graw Hill
Basic TV and Video System
Barnard Grobe
Tata Mc Graw Hill
S.P.Bali
--
R.G.Gupta
Tata Mc Graw Hill
5
6
Colour Television theory &

practice
Television Engineering and
Video System
2. Websites:
http://en.wikipidia.org/wiki/High-defination_Disc_player
http://en.wikipidia.org/wiki/Plasma_display
http://en.wikipidia.org/wiki/Backlit
30
17547 EV5

Wa0013 PDF

Uploaded by

Copyright:

Available Formats

Wa0013 PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Wa0013 PDF

Uploaded by

Copyright:

Available Formats

w.e.

f Academic Year 2012-13

MAHARASHTRA STATE BOARD OF TECHNICAL EDUCATION, MUMBAI

Computer Hardware &

Control System & PLC

Student Contact Hours Per Week: 33 Hrs.

w.e.f Academic Year 2012-13

MAHARASHTRA STATE BOARD OF TECHNICAL EDUCATION, MUMBAI

Computer Hardware &

MSBTE Final Copy Dt. 30/10/2013

w.e.f Academic Year 2012-13

MAHARASHTRA STATE BOARD OF TECHNICAL EDUCATION, MUMBAI

Computer Hardware &

Student Contact Hours Per Week: 33 Hrs.

MSBTE Final Copy Dt. 30/10/2013

w.e.f Academic Year 2012-13

: Electronics Engineering Group

: Fifth for ET/EN/EX/EJ/IE/IS/IC/DE/EV/MU and Sixth for IU/ED/EI

: Computer Hardware and Networking

Teaching and Examination Scheme:

w.e.f Academic Year 2012-13

Selection of appropriate hardware based on application

Error codes, memory package,

Principle of OSI reference model

MSBTE Final Copy Dt. 30/10/2013

w.e.f Academic Year 2012-13

Topic and Contents

MSBTE Final Copy Dt. 30/10/2013

w.e.f Academic Year 2012-13

PC problems and troubleshooting, POST.

w.e.f Academic Year 2012-13

3. Install and testing of network components

MSBTE Final Copy Dt. 30/10/2013

w.e.f Academic Year 2012-13

The Complete PC Upgrade &

Upgrading & Repairing PCs

Douglas E Comer &

Tata McGraw Hill

MSBTE Final Copy Dt. 30/10/2013

w.e.f Academic Year 2012-13

: Electronics Engineering Group

: Fifth for ET/EN/EX/EJ/IE/IS/IC/DE/EV/MU and Sixth for IU/ED/EI

Teaching and Examination Scheme:

w.e.f Academic Year 2012-13

To Interface simple peripherals to

Procedural steps for writing

Principles of assembly language programming. Principles of

Procedural steps for

8255 modes, External

MSBTE Final Copy Dt. 30/10/2013

w.e.f Academic Year 2012-13

3.3 Assembly language programming

MSBTE Final Copy Dt. 30/10/2013

w.e.f Academic Year 2012-13

Topic 4: MCS 51 Interrupt and timers

w.e.f Academic Year 2012-13

4. To develop program for finding smallest/largest number and arranging numbers in

EEE/ Prentice Hall of

The 8051 microcontroller &