B3.3 Series: Diesel Generator Set
B3.3 Series: Diesel Generator Set
B3.3 Series: Diesel Generator Set
B3.3 Series
Specification Sheet
Engine
Cummins B3.3 series, 4 cylinder, In-line 4 stroke, radiator
cooled engine
Well designed air handling system with
Dry type, heavy duty, replaceable paper element air
cleaner with restriction indicator
Air to air aftercooling
Optimised turbocharger for increased altitude
capabilities
Best in class fuel economy with
Inline fuel pump with A1 class mechanical governing
Spin on fuel filter
Standard integral set-mounted radiator system, designed
and tested for 50C ambient temperature
Full flow spin on lube oil filter
First fill of lube oil and coolant
Electrical starter motor with soft start engagement feature
Battery charging alternator
1 x 12 V DC battery
Specification Sheet
PS0500 Features
Cummins PowerStart
PS0500 control is a
microprocessor based
generator set monitoring and
control system. This control
includes an intuitive operator
interface that allows for
complete generator set
control as well as system metering, fault annunciation,
configuration and diagnostics.
Intuitive operator interface which includes LED backlit LCD
display with tactile feel soft-switches & generator set status
LED lamps
Remote Start-Stop
Engine Metering: Oil pressure, Engine temperature, Starting
battery voltage, Engine running hours
AC Alternator Metering: L-L Voltage and L-N Voltage,
Current (phase and total), kVA (phase and total) and
Frequency.
Engine Protection: Low lube oil pressure, High/Low Coolant
temperature, Battery Over/Under/Weak Volts, Fail to Crank/
Start, Sensor failure, Cranking lockout, Low fuel level.
AC Alternator Protection: Over/Under Voltage, Over/Under
Frequency, Loss of AC sensing.
Data Logging: Engine Hours, Control Hours and upto 5
recent fault codes
Configurable glow plug control
12 Volt DC operation
Sleep mode
Modbus interface (RS485 RTU)
InPower Compatible (PC based service tool)
Certifications - meets the requirement of relevant ISO, EN,
Mil Std. and CE standards
Alternator
Silencer
Control Panel
Control panel is manufactured with 14/16 gauge CRCA sheet
and is powder coated for weather-proof and long lasting finish.
The control panel consists of the following parts:
PS0500 Controller
Aluminum bus bars with suitable capacity with incoming/
outgoing terminals
Indicating lamps for Load ON and Set Running
Instrument fuses duly wired and ferruled
MCCB of suitable rating with overload and short circuit
protections
Mounting Arrangement
Engine and alternator are mounted on a common MS
fabricated base frame with AVM pads.
Base frame with integral fuel tank is provided with drain
plug, air vent, inlet and outlet connection, level indicator and
provision for cleaning
Optional
Engine: Coolant heater, Oil drain pump, Electronic
governing
Alternator: PMG
Control Panel: Microprocessor / relay based AMF control
panel
Others: Trolley mounted mobile sets
Acoustic Enclosure
Specially designed to meet stringent MoEF/ CPCB norms of
75 dBA @ 1mtr at 75% load under free field conditions
The acoustic enclosure is made of CRCA sheets in Munsel
green shade and a structural/ sheet metal base frame
painted in black.
High quality noise absorbant and fire-retardant grade
acoustic insulation material (P.U. Foam) complying to IS
8183
Two point lifting for easy handling at customer site
Specification Sheet
Technical Data
Generator Set Specification
Model
Duty
Power Rating kVA / kWe
No. of Phases
Output Voltage (V)
Power Factor
Current (3 phase/ 1 phase) (A)
Frequency (Hz) and RPM
Engine Specification
Make
Model
MoEF Certified Power (hp)
Required Power for Rated kVA (hp)
Cooling
Aspiration
No. of cylinders
Bore (mm) x Stroke (mm)
Compression ratio
Displacement (litre)
Fuel
Fuel consumption @75% load with radiator and fan* (litre/hr)
Fuel consumption @100% load with radiator and fan* (litre/hr)
Performance class of generator set
Starting system
Lube oil specification
Lube oil sump capacity, High-Low level (litre)
Total lubrication system capacity (litre)
Lube oil consumption @ full load** (litre/hr)
Total coolant capacity (litre)
Exhaust pipe size (inch)
Total wet weight (Engine+Radiator)## (kg)
Length x Width x Height (Engine) (mm)
Mean piston speed (m/s)
Combustion air intake @100% load (5%) (cfm)
Exhaust Temperature (C)
Alternator Specification
Make
Alternator frame
Enclosure
Voltage regulation (Max.)
Class of Insulation
Winding Pitch
Stator Winding
Rotor
Waveform distortion/ Total Harmonic Distortion
Maximum Unbalanced Load across phases#
Telephonic Harmonic factor
C50D5P
Prime
50/40
3 Phase
415 V
0.8 (lagging)
70
50 Hz, 1500 RPM
1 Phase
230 V
1
217
C62.5D5P
Prime
62.5/50
3 Phase
415 V
0.8 (lagging)
87
50 Hz, 1500 RPM
1 Phase
230 V
1
272
Cummins
4BTAA3.3-G11
84
66
Liquid Cooled (EG Compleat 50:50)
Turbocharged, Charge Air Cooled
4
95 x 115
17.3:1
3.3
High Speed Diesel
9.6
12.44
ISO 8528-5 G2
12 V DC Electrical
CI4+ 15W40
7 - 5.5
7.9
0.01
13
3
375
784 x 973 x 870
5.75
160
490
Cummins
4BTAA3.3-G11
84
81
Liquid Cooled (EG Compleat 50:50)
Turbocharged, Charge Air Cooled
4
95 x 115
17.3:1
3.3
High Speed Diesel
11.53
15.31
ISO 8528-5 G2
12 V DC Electrical
CI4+ 15W40
7 - 5.5
7.9
0.01
13
3
375
784 x 973 x 870
5.75
160
490
Stamford (CGT)
UCI224D
UCI224F
IP23
1%
H Class
2/3
Double layer lap
Dynamically Balanced
No load < 1.5 %, Non distorting
balanced linear load < 5 %
less than or equal to 25%
< 2%
Stamford (CGT)
UCI224 V
UCI224 G
IP23
1%
H Class
2/3
Double layer lap
Dynamically Balanced
No load < 1.5 %, Non distorting
balanced linear load < 5 %
less than or equal to 25%
< 2%
* Fuel consumption data is based on diesel having specific gravity of 0.85 and conforming to IS:1460. Fuel consumption tolerance is +5%
*Oil consumption data is based on oil having specific gravity of 0.89 and meeting CI4+ API categories
#
With the condition that none of the phases exceeds its rated current
Specification Sheet
Rating Definitions
Conformance Standards
IS/IEC 60034-1
ISO 3046
IS 1460
ISO 9001
ISO 8528
IS 13018
Rating
(kVA)
Length
(mm)
Width
(mm)
Height
(mm)
Wet Weight##
(kg)
C50D5P
50
2950
1150
1550
1470
110
C62.5D5P
62.5
2950
1150
1550
1470
110
##
Approximate Weight
Authorised Representative