Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 82 views

    5070 - 1.6-1.7 AST Sample Tubes

    Uploaded by

    Ali Bari
    These sample tubes are used with Ankersmid ASP probes to sample gas streams. They are made of various materials depending on the temperature of the gas stream, ranging from PTFE for below 90°C up to Kanthal for below 1400°C. Electrically heated sample tubes are also available in lengths from 0.5 to 2 meters to prevent condensation and blockages. They incorporate temperature sensors and controllers to heat and monitor the tube temperature.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    5070 - 1.6-1.7 AST Sample Tubes

    Uploaded by

    Ali Bari
    82 views3 pages
    These sample tubes are used with Ankersmid ASP probes to sample gas streams. They are made of various materials depending on the temperature of the gas stream, ranging from PTFE for below 90°C up to Kanthal for below 1400°C. Electrically heated sample tubes are also available in lengths from 0.5 to 2 meters to prevent condensation and blockages. They incorporate temperature sensors and controllers to heat and monitor the tube temperature.

    Original Description:

    Syngas sample tubes

    Original Title

    5070_1.6-1.7 AST Sample Tubes

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    These sample tubes are used with Ankersmid ASP probes to sample gas streams. They are made of various materials depending on the temperature of the gas stream, ranging from PTFE for below 90°C up to Kanthal for below 1400°C. Electrically heated sample tubes are also available in lengths from 0.5 to 2 meters to prevent condensation and blockages. They incorporate temperature sensors and controllers to heat and monitor the tube temperature.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    82 views3 pages

    5070 - 1.6-1.7 AST Sample Tubes

    Uploaded by

    Ali Bari
    These sample tubes are used with Ankersmid ASP probes to sample gas streams. They are made of various materials depending on the temperature of the gas stream, ranging from PTFE for below 90°C up to Kanthal for below 1400°C. Electrically heated sample tubes are also available in lengths from 0.5 to 2 meters to prevent condensation and blockages. They incorporate temperature sensors and controllers to heat and monitor the tube temperature.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    Sample Tubes AST

    for sample probes series ASP

    Application
    These sample tubes are used in combination with the Ankersmid ASP probes
    in order to sample the gas in the optimal section of the gas-stream. For a
    typical installation of the probe-tip, a position in the middle third of the gas
    stream is advised.
    For dust concentrations higher than 2g/m, we advise fitting a pre-filter in
    combination with an extension tube.
    Description
    Different solutions for different applications:

    Used for dust loading


    up to 2g/m3
    Sampling after wet scrubber
    up to 90C
    Sampling gases up to max.
    1400C
    Different materials
    Available in lengths up to
    2500mm, others in request

    Maximum sample tube temperature is depending on the horizontal length inside this temperature zone.
    Application

    Tube type

    After wet scrubber


    or high dew point

    ADT 080
    (Demistor tube)

    Temp < 150C

    Max. T
    [C]

    Material

    Connection

    Outer
    diameter

    90C

    PTFE

    G o

    40-70

    AST 411-412- 413

    150C

    PTFE

    G o

    22

    Temp < 600C

    AST 051- 404

    600C

    SS316

    G o

    22

    Temp < 900C

    AST 431-432-433-434

    900C

    Hastelloy C

    Temp < 1400C

    AST 435

    HCl or high
    corrosive gas

    AST 421-422-423-424

    G o

    22

    1400C

    Kanthal

    G o

    20

    450C

    Titanium

    G o

    22

    Ankersmid Products, http://www.ankersmidsampling.com, Ankersmid Sampling products manufacturing


    Neerlandweg 22, 2610 Wilrijk, Belgium Tel.: +32(0)3/820.80.00 Fax: +32(0)3/230.98.58

    Electrically heated sample tube


    AST 05x, AST 10x, AST 15x, AST 20x

    Application
    The electrically heated Ankersmid sample probe tube AST 05x-10x15x-20x are used in extractive sampling systems to avoid cooling and
    condensation of the sample.
    Condensation, in combination with a high dust load, can result in blockage
    of the probe. This is to be strictly avoided as sample gases may be
    absorbed into the condensate after cooling and will be undetectable. An
    extra stainless filter can be mounted on top of the tube in case of very high
    dust levels (> 10 g/m).
    Description

    Different lengths available

    This electrically heated sample tube is available in 4 standard lengths:


    0.5, 1, 1.5 and 2.0 meter (other lengths on request).
    As for all Ankersmid probes, the standard flange is a DN65 PN6.
    Adapter flanges for most common process connections can be provided if
    required.
    If needed, it is possible to affix a non-heating sample probe or pre-filter to
    the tip of the heated tube.
    Inside the sample tube a thermocouple type J (Fe-CuNi) is integrated. As a
    standard it is installed in combination with the digital controller, the user has
    a freely programmable set point and alarm.

    Completely heated sample


    tube
    Digital controller
    Easy mounting
    Optional: Modbus/RS485

    Optional available is a 2-way Modbus/ RS485 communication that combines


    signals from all installed Ankersmid controllers, so that digital communication
    with the control room is possible.
    Dimensions

    Ankersmid Products, http://www.ankersmidsampling.com, Ankersmid Sampling products manufacturing


    Neerlandweg 22, 2610 Wilrijk, Belgium Tel.: +32(0)3/820.80.00 Fax: +32(0)3/230.98.58

    Technical data

    Series AST Type

    AST05x

    AST10x

    AST15x

    AST20x

    Temperature sensor & controller


    (additional part number)
    AST 001

    Incorporated capillary temperature controller

    AST 002

    Temperature sensor thermo-couple type J (Fe-CuNi)

    AST 003

    Temperature sensor thermo-couple type K (NiCr-Ni)


    Temperature sensor thermo-couple type J (Fe-CuNi),

    AST 004

    including integrated electronic controller with high/low alarm


    Temperature sensor thermo-couple type K (NiCr-Ni),

    AST 005

    including integrated electronic controller with high/low alarm

    RS 485 / Modbus interface


    Probe tube length L1
    Sample temperature max.
    Operating temperature max.
    (pre-adjusted at 180C)

    Optional
    500mm

    1000mm

    1500mm

    2000mm

    500C

    500C

    450C

    400C

    200C

    200C

    200C

    200C

    Pre-filter

    Optional

    Sample gas inlet connection

    G3/4"i

    Dust loading

    max. 2 g/m3

    Probe tube volume

    200ml/m

    Sample pressure max.

    5 bar g

    Ambient temperature

    -20C to +70C

    Storage temperature

    -30C to +70C

    Ready for operation

    Approx. 0,5h

    Power supply
    Electrical connection
    Electrical standard
    Degree of protection
    Mounting flange
    Material of gas wetted parts

    230VAC, 500W

    230VAC, 800W

    230VAC, 1200W

    230VAC, 1500W

    115VAC, 500W

    115VAC, 800W

    115VAC, 1200W

    115VAC, 1500W

    2 x 2.5mm + 2.5mm
    EN 61010, EN60519-1
    IP54 EN 60529
    DN65 PN6
    Stainless steel 316

    Ankersmid Products, http://www.ankersmidsampling.com, Ankersmid Sampling products manufacturing


    Neerlandweg 22, 2610 Wilrijk, Belgium Tel.: +32(0)3/820.80.00 Fax: +32(0)3/230.98.58

    You might also like