AB & I Catalog
AB & I Catalog
AB & I Catalog
CASTI
RONNOHUBPI
PE&FI
TTI
NGS
CASTI
RONHUB&SPI
GOT(
SV)PI
PE&FI
TTI
NGS
ACCESSORI
ES
AB&I foundry
About US
About Us
AB&I Foundry has been manufacturing cast iron soil pipe and fittings in America since 1906. We produce a full
line of standard and specialty cast iron soil pipe and fittings for drain, waste, and vent (DWV) plumbing systems.
AB&I also provides custom gray iron foundry services for OEM manufacturers. All of our quality products are
proudly made in the USA and meet all applicable ASTM and CISPI standards. Our basic principles embracing
integrity and professionalism are what set us apart.
Our Values
At AB&I, we believe in...
Giving Team Members the chance to make decisions and learn from them
Open communications and honest Team Member evaluations
Sharing financial and business information with all Team Members
Promoting a safe and enjoyable workplace
The ability of every Team Member to make a positive contribution
The Full-Line of Cast Iron Pipe and Fittings America Can Trust
AB&I has been a leading West Coast producer of cast iron drain, waste and vent systems for decades. Now
the high quality pipe and fittings that have distinguished AB&I as an industry leader are available nationwide.
Cast Iron No-Hub Pipe and Fittings
SV Gaskets
Accessories
All AB&I products are 100% made in America. All of our products have been carefully engineered to meet the
most demanding industry standards, and are accepted for use by all plumbing codes in every jurisdiction in the
United States.
AB&I products are represented nationwide by an extensive network of Customer Service professionals, Regional
Sales Managers, and Manufacturers Representatives, thoroughly dedicated to providing the highest level of
customer service.
QUIETER OPERATIONS
Cast iron is often referred to as the quiet pipe because of its inherent density it provides superior noise
suppression. Cast iron effectively suppresses annoying swooshing sounds that result from effluents
cascading down from upper floors, resulting in a higher quality installation and a more satisfied customer.
This sound attenuation feature can be a major benefit in quality residential and commercial construction,
where building owners and tenants understand the advantage of iron by the very first flush.
RESISTANT TO CORROSION
Cast iron has been proven to be resistant to corrosion, even in the harshest soil environments with the most
challenging effluents.
SUGGESTED SPECIFICATION
BELOW GRADE
All drain, waste, vent, sewer and storm lines shall conform to the requirements of CISPI Standard 301*,
ASTM A 888* or ASTM A74*. Pipe and fittings shall be marked with the collective trademark of the
Cast Iron Soil Pipe Institute or receive prior approval of the engineer.
Building or house sewers shall be of cast iron soil pipe and fittings from the building drain to the point of
connecting with the city sewer or disposal plant. All pipe and fittings shall conform to the requirements
of CISPI Standard 301*, ASTM A888* or ASTM A74*. Pipe and fittings shall be marked with the collective
trademark of Cast Iron Soil Pipe Institute or receive prior approval of the engineer.
ABOVE GRADE
All drain, waste, vent, sewer and storm lines shall conform to the requirements of CISPI Standard 301*,
ASTM A888* or ASTM A74*. Pipe and fittings shall be marked with the collective trademark of the
Cast Iron Soil Pipe Institute or receive prior approval of the engineer.
JOINTS
NoHub Couplings shall conform to the CISPI Standard 310* and ASTM A1277
HeavyDuty Couplings shall conform to the requirements of ASTM C1540
Compression Gaskets for Hub & Spigot shall conform to the requirements of ASTM Standard 564*
and ASTM C1563*
Joints for pipe and fittings shall conform to the manufacturers installation instructions and local
code requirements
TABLE OF CONTENTS
ADAPTERS
45 Offset SV...................................... 26
Double 1/4 Bend SV............................. 22
Long 1/4 Bend SV................................. 22
Long 1/8 Bend SV.................................. 22
Long Sweep 1/4 Bend SV..................... 22
Short Sweep 1/4 Bend SV.................... 22
Single Hub Return Bend SV............... 22
CLEANOUTS
CLOSET BENDS
CLOSET FLANGES
CROSSES
FERRULES
FIGURE FITTINGS
Figure 1 NH......................................... 13
Figure 5 NH...................................13, 14
Figure 6 NH..........................................14
Figure 8 NH..........................................14
FITTINGS
GASKETS
EZTITE SV.......................................... 30
Lubri/Fast Lubricant SV.................. 30
TYSEAL SV......................................... 30
TYSEAL Lubricant SV........................ 30
TYTools SV......................................... 30
INCREASERS REDUCERS
PIPE
PLUG
CLOSET RINGS
TEES
TRAPS
P Trap NH......................................... 12
Deep Seal P Trap NH....................... 12
Running Trap NH................................. 12
Running Trap with Double Vent NH... 12
Side Inlet P Trap NH......................... 12
P Trap SV.......................................... 28
Deep Seal P Trap SV........................ 28
VENT Bypass
Qualit y silverspun
no-hub Pipe
Part No.
Size
Unit Wt.
Pcs/Pkg
Total Ft.
00156
00158
00160
00162
00164
00168
00170
00172
00182
00185
1 x 10
2 x 10
3 x 10
4 x 10
5 x 10
6 x 10
8 x 10
10 x 10
12 x 10
15 x 10
30
36
54
74
90
115
165
265
325
435
54
64
48
30
24
21
10
8
6
3
540
640
480
300
240
210
100
80
60
30
Pkg. Wt.
1620
2304
2592
2220
2160
2415
1650
2120
1950
1305
J Outside
Diameter
1.90.06
.16 .13
2.35.09
.16 .13
3.35.09
.16 .13
4.38+.09.05 .19 .15
5.30+.09.05 .19 .15
6.30+.09.05 .19 .15
8.38+13.09 .23 .17
10.56.09 .28 .22
12.50.13 .28 .22
15.83.13 .36 .30
1
2
3
4
5
6
8
10
12
15
1.50.09
1.96.09
2.96.09
3.94.09
4.94.09
5.94.09
7.94.13
10.00.13
11.94.13
15.11.13
T Thickness
Norm.
Min.
NO-HUB FITTINGS
E
D
D
D
D
BEND
Part No.
Size
00188 1
00190 2
00192 3
00194 4
00196 5
00198 6
00200 8
00218
4 x 3
D
4
4
5
5
6
7
8
5
Wt.
2
3
4
7
9
14
34
6
Size
3 x 2
4 x 2
D
4
45/16
E
3
3
Wt.
4
8
Wt.
4
5
8
13
15
19
12
D
9
9
10
10
11
12
10
Part No.
00280
00282
Size
1
2
3
4
5
6
4 x 3
D
5
5
E
27/8
3
A
15
D
5
E
10
Wt.
8
Wt.
5
9
DOUBLE BEND
Part No.
00402
00404
00406
Size
2
3
4
D
4
5
5
Wt.
4
6
12
E
D
BEND TAPPED
Part No.
00326
00335
00330
00332
Size
D
E
Wt.
1 x 1 3 2 2
2 x 1 3
2 2
2 x 1 3
2 2
2 x 2
3
25/8 2
D
6
7
7
8
9
10
12
13
14
Wt.
4
6
10
12
19
28
68
77
122
BEND EXTENDED
Part No.
07067
00425
62875
07081
07104
Size
2 x 12
2 x 18
2 x 24
3 x 12
4 x 12
D
12
18
24
12
12
E
4
4
4
5
5
Wt.
5
7
11
7
10
NO-HUB FITTINGS
D
D
72
1/5 BEND
Part No.
Size
00536 2
00538 3
00540 4
D
311/16
41/16
47/16
Wt.
2
4
7
Part No.
00636
00638
00643
07425
07463
07449
Bend Extended
Size
2 x 6
2 x 12
2 x 18
3 x 12
3 x 18
4 x 12
D
6
12
18
12
18
12
E
3
23/4
23/4
3
3
31/8
Wt.
3
6
7
8
11
10
Increaser - reducer
Part No.
09658
Size
3 x 4
F
8
Wt.
5
F
D
D
60
1/6 BEND
Part No.
Size
00570 2
00572 3
00574 4
D
3
3
313/16
22
Wt.
2
4
6
1/16 Bend
Part No.
Size
00676 11/2
00678 2
00680 3
00682 4
00684 5
00686 6
00688 8
D
21/8
21/8
21/4
25/16
27/8
3
33/4
Reducer (Short)
Wt.
1
2
2
4
6
6
14
45
BEND
Part No.
Size
00604 1
00606 2
00608 3
00610 4
00612 5
00614 6
00616 8
00617 10
00622 12
00625 15
D
25/8
23/4
3
31/8
37/8
41/16
5
515/16
69/16
73/16
E
Wt.
1
2
3
5
7
9
20
28
39
62
Part No.
Size
D
E
Wt.
19107
2 x 18
18
61/2
7
19060
2 x 24
24
61/2
11
Part No.
02138
02140
02142
02144
83314
02148
02150
02152
02154
02156
02158
02160
02162
02164
02166
02168
02172
02174
02175
02184
02186
02188
02190
02204
02206
02208
02210
02212
Size
F
Wt.
2 x 1
35/8 1
3 x 2
35/8 1
4 x 2
35/8 2
4 x 3
35/8 2
5 x 2 4 3
5 x 3 4 4
5 x 4 4 4
6 x 2 4 4
6 x 3 4 5
6 x 4 4 4
6 x 5
4 5
8 x 2
4 8
8 x 3
4 8
8 x 4
4 7
8 x 5 5 9
8 x 6 5 8
10 x 4
5 16
10 x 6 6 15
10 x 8 6 15
12 x 4
6 20
12 x 6
6 20
12 x 8 7 21
12 x 10
7 25
15 x 4 7 32
15 x 6 7 35
15 x 8 7 34
15 x 10
7 38
15 x 12
7 36
NO-HUB FITTINGS
E
E
Sanitary Tee
Right Inlet
F
G
Sanitary Tee
D
E
3
29/16
3
213/16
3
213/16
3
31/6
3
35/16
3 39/16
47/8
43/16
3
313/16
3
41/16
4 43/8
3 45/16
4 49/16
3 413/16
4 51/16
F
Wt.
511/16
2
511/16
3
511/16
3
63/8
3
511/16
4
63/8 4
8
7
511/16
5
63/8
5
8
7
73/16 8
8
7
6 9
77/16 8
C
D
4 6
4 6
4 6
5
6
5
6
5
6
E
5
5
5
5
5
5
F G Wt.
8 5 6
8 5 6
8 5 7
91/8 5 10
91/8 5 10
91/8 5 10
F
Left Inlet
D
G
Sanitary Tee
Part No.
09283
02014
02016
02018
09337
02024
02028
02030
Size
1 x 1
2 x 1
2 x 1
2 x 2
3 x 1
3 x 2
4 x 1
4 x 2
D
E
F
Wt.
3
29/16
511/16
3
3
213/16
511/16
3
3
213/16
511/16 4
3
31/16
63/8 4
3
35/16
511/16
5
3
39/16
63/8 5
31/4 313/16 511/16 6
3
41/16
63/8 8
NO-HUB FITTINGS
Front View
F
D
F
G
E
Sanitary Cross
G
e
Side View
D
4
4
4
5
4
5
5
6
7
E
4
4
5
5
5
5
5
6
12
F
6
67/8
67/8
8
67/8
8
91/16
101/16
7
IPS
Tap
2
3
4
5
3
6
8
10
D
33/16
37/8
47/16
5
47/16
6
75/8
10
Wt.
3
6
11
16
8
21
38
59
Sanitary Cross
Front View
Part No. Size
E
F
02046 2
2
63/8
02048 3
211/16 7
02050 4
3
87/8
02052 5
4
11
08278 4 x 3 3
87/8
02054 6
5
12
02056 8
6
15
02058 10
6 20
Test Tee
(less brass plug)
Sanitary CROSS
Side View
Wt.
3
4
6
7
7
8
10
14
20
IPS
Part No. Size Tap
11736 2 2
11743 3 3
11750 4 4
11767 5 5
11774 6 6
11781 8 8
E
2
211/16
3
4
5
6
F
63/8
7
87/8
11
12
15
D
33/16
37/8
47/16
5
6
75/8
Wt.
3
6
10
16
21
34
X
D
Tapped Adapter
c
Sanitary CROSS
Hub Adapter
Part No.
Size
02222 2
02224 3
02226 4
X
Wt.
4 3
4 3
5 5
Part No.
02238
02242
02244
09948
Size
1 x 1
2 x 1
2 x 2
3 x 2
F
25/8
23/16
25/8
23/16
IPS
11/2
11/2
2
2
Wt.
1
1
2
1
10
NO-HUB FITTINGS
E
F
D
D
G
Wye
Part No. Size
D
01312 1 4
01314 2 45/8
01316 3 x 2 55/16
01318 3 5
01320 4 x 2 6
01322 4 x 3 6
01324 4 71/16
01326 5 x 2 7
01328 5 x 3 8
01330 5 x 4 8
01332 5 9
01334 6 x 2 8
01336 6 x 3 8
01338 6 x 4 9
01340 6 x 5 10
01342 6
10
01344 8 x 2 93/8
01346 8 x 3 913/16
01348 8 x 4 103/8
01350 8 x 5 113/8
01352 8 x 6 1113/16
01354 8 133/8
01362 10 x 4 1111/16
01364 10 x 6 131/8
01365 10 x 8 1411/16
01366 10 161/2
01372 12 19
01375 15 23
F G
Wt.
6
2
2
65/8 2
3
65/8
1
4
8
2 6
65/8
1
6
8
111/16
7
9 27/16 8
81/16
15/16
7
911/16
111/16
9
113/16 27/16
12
125/8 31/8 15
85/16
10
9
1
13
113/16 115/16 16
12
29/16
17
141/16
35/16
21
8
9/16
16
95/16
1/8
18
117/16 15/16
23
1213/16 15/8
23
143/16 215/16 27
171/8 3 40
125/8
37
157/16
23/16
48
183/8
35/8
50
21 51/16 76
25 5 107
30
6 204
Double Wye
Part No. Size D
F G
Wt.
01538 2 45/8
65/8
2
4
01540 3 x 2 51/16
65/8 1 4
01542 3 5
8
2
6
01544 4 x 2 6
65/8
1
7
01546 4 x 3 6
8
111/16
7
01548 4
71/16
91/2
27/16 12
01550 5 x 4 8
113/16 27/16 15
01552 6 x 4 9 113/16 115/16 18
01554 6 10 141/6 35/16 23
01556 8 133/8 171/8 3 50
74445 8 x 4 103/8 117/8
25/16 23
01557 8 x 6 1113/16 143/16
25/16 32
D
E
F G
Wt.
53/8
61/8
65/8 2
6
5
6
65/8 1 6
75/16 8 8 2 12
5
7
65/8 1
9
7
8 8 111/16 12
9 10 9
27/16 20
H
G
Upright Wye
Part No. Size
01646 2
01648 3 x 2
01650 3
01652 4 x 2
01654 4 x 3
01656 4
08729 5 x 2
08750 5
E
5
5
5
5
5
6
9
117/16
H G
8 2
83/16
1
87/16 23/16
8
1
87/16
111/16
91/8 27/16
61/8
8
71/8 12
F
7
7
83/8
7
83/8
9
1
2
Wt.
5
6
7
7
10
14
8
21
NO-HUB FITTINGS
D
Top View
p Trap
P Trap
Part No.
Size
D
J
Wt.
02506 1 6 3 3
02508 2 7 4
4
02510 3 9 5 9
02512 4 10 6 17
02514
6
14
7
30
D
6
7
7
J
Wt.
3 3
4
4
4
5
p Trap
long P Trap
Size
2 x 12
2 x 18
D
12
18
J
4
4
Wt.
8
9
19268
19275
13/16
13/16
7
7
31/16
31/16
2 LH
2 RH
Wt.
5
5
Part No.
Size
02600 2
02610 3
02567 4
D
7
9
10
J
Wt.
7 6
7 13
8 17
E
4
p Trap
Running Trap
F G
Wt.
15 10 20
g
c
Right Hand
Illustration
D
Part No.
02527
02530
Side View
D
7
9
10
J
4
5
6
M
2
2
2
Tap Wt.
5
10
18
J
e
p Trap (Reducing)
Part No.
08548
D
9
J
5
5 3/16
Wt.
10
Size
3 x 2
Wt.
21
Part No.
02602
02604
Size
2 x 1 LH
2 x 1 RH
Wt.
6
6
12
NO-HUB FITTINGS
A
C
D
(tapped)
Part No.
08442
08444
08446
Size
E
3 x 3 x 4 7
4 x 3 x 4 93/16
4 x 4 x 4 93/16
D
9
9
9
F
15
19
183/8
IBCO (Ferrule)
Tap
1
2
3
4
5
6
A B
2 1
23/16
33/8
23/16
47/16
4 55/16
4
55/16
3 83/8
C Wt.
1
2
2
1 7
1
8
1 11
IPS
Tapping
1
2
3
4
5
6
Wt.
1
1
2
6
7
10
E
F
Twin Cleanout
Blind Plug
Part No.
02990
Size
4 x 4 x 4
F
7
E
7
Wt.
15
Part No.
Size
02480 1
02482 2
02484 3
02486 4
02488 5
02490 6
02492 8
02494 10
02496 12
02498 15
F
1
1
1
1
1
1
2
3
3
3
Figure 1
Wt.
1
1
1
2
2
3
6
13
18
33
E
F
31/6 7
G
Wt.
1
5
Figure 5
E
2
F G
12 6
Wt.
19
Part No.
08052
08054
08056
08058
08062
Size
2
3 x 2 x 3
3
4 x 2 x 4
4
D
6
87/8
87/8
10
10
E
5
69/16
69/16
7
7
F G
8
113/16
9
2
101/8 2
11 115/16
12
115/16
Wt.
6
11
11
17
17
NO-HUB FITTINGS
E
B
H
45
D
D
D
87/8
E
69/16
F
167/8
Wt.
15
D
79/16
9
E
51/16
8
F
11
13
Wt.
13
23
E
51/16
F C
H
Wt.
11 41/8 37/16 13
D
E
H
E
F
45
D
Right Shown
Figure 6 Right/Left
Part No.
08100
08102
08104
08106
Size
3 x 2 - right
3 x 2 - left
4 x 2 - left
4 x 2 - right
D
79/16
79/16
9
9
E
51/16
51/16
6
6
F
11
11
13
13
Wt.
11
11
18
18
Size
4 x 2
D
9
E
6
F
17
Wt.
27
Wt.
23
23
D
D
H
E
Left Shown
F
Left Shown
Figure 8 Right/Left
Size
D
3 x 2 - left 79/16
3 x 2 - right 79/16
4 x 2 - left 9
4 x 2 - right 9
E
51/16
51/16
6
6
F
17
17
17
17
Wt.
18
18
26
26
D
E
79/16 51/16
79/16 51/16
9 6
9 6
F
H
11 37/16
11 37/16
13 4
13 4
Wt.
13
13
21
21
D
9
E
6
F
C
13 4
Wt.
23
14
NO-HUB FITTINGS
C
f
Closet Bends
Prison Fitting
G
9
H
F
Wt.
5 15 9
h
g
f
H
F
Wt.
3 16 8
f
183/8
Part No.
02892
02896
02894
02898
02904
02908
02914
02912
02924
02932
02934
02936
02938
02940
02944
02946
02950
02954
Size
4 x 4 x 12
4 x 4 x 14
4 x 4 x 16
4 x 4 x 18
4 x 6 x 12
4 x 6 x 15
4 x 6 x 16
4 x 6 x 18
4 x 10 x 12
4 x 10 x 15
4 x 10 x 16
4 x 10 x 18
4 x 12 x 12
4 x 12 x 14
4 x 12 x 16
4 x 12 x 18
4 x 16 x 16
4 x 18 x 18
Part No.
02832
02840
02844
02852
02860
02864
02866
02870
02872
Size
3 x 4 x 6 x 12
3 x 4 x 6 x 15
3 x 4 x 6 x 18
3 x 4 x 10 x 12
3 x 4 x 10 x 15
3 x 4 x 10 x 18
3 x 4 x 12 x 12
3 x 4 x 16 x 16
3 x 4 x 18 x 18
5
9
Right Shown
2 Vent ByPass
H
F
Wt.
3 16 8
Wt.
10
11
11
11
Wt
11
11
15
13
11
15
13
16
16
18
16
19
12
14
20
24
23
25
Wt.
10
10
13
12
16
16
16
18
25
NO-HUB FITTINGS
7
A Min.
F Min.
A
D
Closet Ring
(No-hub)
Part No.
02966
02970
Size
4 x 3 x 3
4 x 4
A
4
4
B
3
4
F
3
4
Wt.
4
5
Size
4 x 2(with test cap)
4 x 2
4 x 4
4 x 4 (with test cap)
4 x 3 (with test cap)
Box Qty
12
12
8
8
12
Part No.
022848
022855
8003
8013*
022879
022886
8005
022930*
022909
8017
8015
8018
022947
8007
8011
8019
Wt.
3
3
4
4
3
Size x Height
4 x 1
4 x 1
4 x 2
4 x 2
4 x 2
4 x 3
4 x 4
4 x 4
4 x 5
4 x 6
4 x 2, 1 Offset
4 x 4, 2 Offset
4 x 3, 3 Reducing
4 x 2
4 x 4 x 4
4x3 x 2
A
6
6
6
63/8
6
6
6
61/8
6
6
6
6
6
6
6
6
B
D
7
1
7 1
7
2
7
2
7 2
7
3
7
4
7
4
7
5
7
6
7
2
7
4
7
3
7
2
7
4
7
2
Wt.
2
2
2
2.8
3
4
5
5
6
6
2.5
4.5
3
3
4
3
16
INSTALLATION PROCEDURES
No-Hub Coupling Installation Instructions
Bracing
To prevent movement, horizontal pipe and fittings 5
inches and larger should be suitably braced by the use
of blocks, rodding or other suitable methods at every
branch or change of direction.
Test
For best results, testing of one floor (ten feet) at a time
is recommended. If more than one floor at a time is
tested, the system should be properly restrained; all
bends, changes of direction and ends of runs should
be restrained.
Coupling Material
No-hub sealing sleeves (gaskets) are made of Neoprene
conforming to ASTM C564. Chemical characteristics
of Neoprene assure that the gasket will not decay or
deteriorate from contact with effluents in the pipe, or
chemicals in the soil or air around the pipe.
Material Specifications
Bands: Type 301 AISI Stainless Steel - Minimum tensile
strength 165,000 psi.
Screw Housing: Type 301 Stainless Steel, 5/16 hex
head slant shoulder.
Shield: Type 301 AISI Stainless Steel Bright annealed;
Rockwell B100 (Vickers 240) minimum.
Sealing Sleeve (Gasket): The sealing sleeve shall be
tested in accordance with ASTM D3677 and be
manufactured from a properly vulcanized virgin
compound where the primary elastomer is
polychloroprene (neoprene).
INSTALLATION PROCEDURES
No-Hub Coupling Installation Instructions Cont.
Before Joining
1. Couplings should be installed with a calibrated torque wrench set at 60 inch pounds
(1 10) or 80 inch pounds (12 & 15).
2. When using field-cut pipe, the ends should be cut square.
Joining Procedure
1. Install the Neoprene sealing sleeve on one end of the pipe or fitting to be joined.
2. Place the stainless steel shield over the other end to be joined.
3. Insert both ends into the sealing sleeve until they butt against the molded center stop,
inside the sealing sleeve.
4. Center the shield over the sealing sleeve and tighten as directed below.
1 2
1, 2, 3, 4 sizes
A. Tighten bands alternately
to 60 inch pounds torque
1 2 3
5, 6, 8, 10 sizes
A. Tighten bands 2" 3" alternately to
60 inch pounds torque
B. Then bands #1 and #4 alternately
to 60 inch pounds torque
4 5 6
1 2 3
MIN
12 & 15 sizes
A. Tighten bands 3 and 4 alternately to
80 pounds torque
B. Tighten bands 2 and 5 alternately to
80 inch pounds of torque
C. Tighten bands 1 and 6 alternately to
80 inch pounds of torque
3 4
4 5 6
MAX
MinMax sizes
A. First torque the minimum side 321
and 321 again
B. Then torque the maximum side 456
and 456 again
C. Finally, torque 32 and 45 to 80
inch pounds
ALL HORIZONTAL PIPE AND FITTINGS, 5 INCHES AND LARGER, SHOULD BE BRACED
TO PREVENT MOVEMENT AT EVERY BRANCH OR CHANGE OF DIRECTION
18
INSTALLATION PROCEDURES
Cutting Instructions
For best results, use a TwinLever Snap Cutter or a ratchettype cutter equipped with a sharp chain and
equallyspaced beveled cutting wheels. There are several methods that work well to cut Cast Iron Soil Pipe.
When using the TwinLever Snap Cutter or ratchettype cutter equipped with a chain and cutter wheels,
make sure that they are sharp and the wheels will rotate in the chain. When using a cutofftype abrasive saw,
make sure to follow all safety procedures recommended by the manufacturer. At all times, read the safety
instructions on any tool that is used to cut cast iron pipe.
Cutting Procedure
1. Position chain around pipe so that the maximum
number of wheels are in contact with the pipe. Too
much space between the first and last wheel in contact
with the pipe will produce a poor quality cut, so be careful
when positioning the chain around the pipe.
2. Score the pipe before making the final cut, applying only
enough pressure to make the cutter wheel create a deep
scratch in the pipe.
3. Release the pressure and rotate the tool slightly; then
apply a quick final pressure to complete the cut. To
produce the best result, it may be necessary to score
the pipe several times before making the final cut.
Note: If the cutter wheels become flattened or dull, it will be very difficult (if not impossible) to obtain a
satisfactory cut. The life of the chain can be extended by reversing the chain to obtain equal use of all the
wheels. It is also important to keep the mechanical features of a cutter in good working order. Proper safety
equipment and attire is required.
AB&I
USA UPC
UPC sv
AB&I
USA
UPC
AB&I USA
pipe
3 Laying Length
NSF-UPCode
NSF-UPCod
NSF-UPCod
AB&I
USA UPC
AB&I USA UPC
USA UPC
AB&I USA UPCAB&I
10 Laying Length
Part No.
244059
244066
244073
244080
244097
000273
000280
000297
000303
Size
2
3
4
5
6
8
10
12
15
3 Ft.
10 Ft.
Part No.
Size
Pcs/Pkg Unit Wt.
Part No.
Size
Pcs/Pkg Unit Wt.
AB&I
NSF-UPCode
AB&I USA 000006
UPC
UPC 20
2 USA 102
000181
2
102
15
AB&I USA UPC
000013
3
60
31
000198
3
60
23
000020
4
46
42
000204
46
30
USA4 UPC
AB&I
000037
5
32
55
000211
5
32
39
000044
6
24
62
000228
6
24
45
000051
8
15
100
000235
8
15
78
000068
10
8
150
000242
10
8
116
000075
12
6
190
000259
12
6
145
AB&I
USA
UPC
AB&I USA UPC
000082 15
4
260
000266
15
4
205
NSF-UPCode
4
497
L Laying Length
Telescoping Length
Telescoping
Length
Size Y
2
2.50
3
2.75
4
3.00
5
3.00
6
3.00
8
3.50
10
3.50
12
4.25
15
4.25
Part No.
Size
000310 2
000327 3
000334 4
Laying Length
(see above)
Hub
Hub Barrel Barrel
Nominal Minimum
I.D. O.D. O.D.
I.D.
Thickness Thickness
A
C
J B
T
T
2.94
3.62 2.30 1.96 0.17 0.14
3.94
4.68 3.30 2.96 0.17 0.14
4.94
5.68 4.30 3.94 0.18 0.15
5.94
6.68 5.30 4.94 0.18 0.15
6.94
7.68 6.30 5.94 0.18 0.15
9.25
10.13
8.40 7.94 0.23 0.17
11.38
12.44
10.50 9.94 0.28 0.22
13.50
14.56 12.50 11.94 0.28 0.22
16.95
18.11 15.88 15.16 0.36 0.30
L
Pcs/Pkg Wt.
25 140 12
24 80 17
24 50 26
Part No.
086185
274452
Size
8 x 30
10 x 30
L
30
30
Wt.
59
92
Part No.
400864
400865
400866
400867
400868
Size
2 x 5
3 x 5
4 x 5
5 x 5
6 x 5
L
4 9
4 9
4 9
4 9
4 9
Wt.
22
32
43
58
70
20
sv FITTINGS
X
D
D
BEND
Part No.
Size
000341 2 3
000358 3 4
000365 4 4
000372 5 5
000389 6 5
000396 8 65/8
000402 10 75/8
000419 12 8
000426* 15 10
Bend
Wt.
6
4
7
6
8
11
8
17
9
20
11 41
12
59
15
79
16 218
Part No.
Size
X
000518 2 1
000525 3 115/16
000532 4 23/16
000549 5 23/8
000556 6 29/16
000563 8 31/8
000570 10 3
000587 12 41/16
000594* 15 411/16
D
4
415/16
511/16
57/8
61/16
8
83/8
105/16
1015/16
Wt.
4
6
9
11
13
34
50
69
144
X1
BEND
Size
3 x 2
4 x 2
X
4
4
X 1
9
10
D
7
8
Wt.
9
13
*XH only
*XH only
X
X
X
X
2
2
213/16
31/8
33/8
41/8
411/16
1/16 Bend
1/6 Bend
Part No.
Size
000464 2
000471 3
000488 4
383116 5
000495 6
328536 8
000501 10
D
4
5
65/16
65/8
67/8
9
99/16
Wt.
4
6
10
14
17
33
44
Part No.
Size X
000600 2 7/8
000617 3 13/16
000624 4 15/16
000631 5 13/8
000648 6 1
000655 8 113/16
000662 10 2
000679 12 23/8
000686* 15 25/8
D
35/8
43/16
413/16
47/8
5
611/16
67/8
85/8
87/8
Wt.
3
6
8
12
12
25
39
56
78
Part No.
047698
047704
Size
4 w/2 RH
4 w/2" LH
D
8
8
X
4
4
Wt.
17
17
*XH only
DOUBLE BEND
Part No.
Size
392002 4
D
8
X
4
Wt.
15
sv FITTINGS
X
X
D
BEND,
Reducing
Part No.
100089
000747
000754
Size
3 x 2
4 x 2
4 x 3
D
7
7
81/8
Long BEND
X
33/8
3
4
Wt.
7
12
10
Part No.
000792
000808
000815
000839
000860
000877
Size
2 x 12
2 x 18
3 x 12
4 x 12
4 x 18
4 x 24
X
3
3
4
4
4
4
D
12
18
12
12
18
24
Wt.
7
8
11
16
22
28
Long Bend
Part No.
000983
000990
001003
001010
393023
Size
3 x 12
3 x 18
4 x 12
4 x 18
6 x 18
X
115/16
115/16
23/16
23/16
29/16
D
12
18
12
18
18
D
11
12
13
13
14
16
17
20
21
Wt.
7
11
16
20
30
54
83
104
174
*XH only
Wt.
10
12
16
18
31
j
X
J
57/8
73/16
Part No.
Size
X
001102 2 5
001119 3 6
001126 4 6
001133 5 7
001140 6 7
001157 8 85/8
001164 10 95/8
001171 12 10
D
Wt.
8
6
9
9
10
13
10 16
11
20
13 48
14 78
17 101
Size
3 x 2
4 x 3
X
9
9
D
12
13
Wt.
11
13
Wt.
10
17
22
sv FITTINGS
x1
Left Shown
x
g1
X
D G
Wt.
8
2
6 7
9
4
7
11
10
4
7 11
9
4 7 13
10
4
7 15
11
4 8 17
11
5
8
18
12
5
8 19
9
5 7 17
10
5
7 19
11
5 8 24
13
5 9 29
13
6
9 38
15
6 10 40
17
65/8 11 49
13
7
9 50
15
7 10 55
17
75/8 11 68
19
75/8 12 78
22
8 15 113
16
8 12 79
18
85/8 13 111
20
85/8 14 123
25 10 16 245
18 101/8 13 180
G
8
8
G1
9
9
X
11
11
X1 Wt.
4 17
4 17
x1
Left Shown
x
g1
x1
G
8
8
G1
9
9
X
11
11
E G
Wt.
2 6 6
2
6 6
2 7 8
2 7 8
3
7 11
3
8 14
3
7 15
3
77/8 13
3
8 15
35/8 9 26
4
9 25
x1
X1
Wt.
4 20
4 20
g
x1
* XH only
Straight Cross
x
g1
Part No.
Size G
102588
4 x 2
7
102595 4
8
X
X 1
Wt.
9
3
16
11 3 17
sv FITTINGS
G
Size
X
E G
Wt.
2 x 1 8 213/16
6 6
2 x 2
8
31/16
6 7
3 x 1 9 35/16 7 8
3 x 2
9
39/16 7 9
3 x 3
10 35/16
7
11
4 x 1 9 313/16 7 11
4 x 2
9
41/16 7 13
4 x 3
11 315/16 8 14
e1
Sanitary Cross
Part No. Size
002512 2
002529 3 x 2
002536 3
002543 4 x 2
002550 4 x 3
002567 4
002574 5 x 4
383321 6
102618 6 x 4
(no baffle)
X
E G
Wt.
8 3 6
9
9
4
7
13
10 4
7 15
9
4 7
15
10 4
7 18
11 4 8
19
11 5
8
23
13 5 9
44
11 5
8
29
x
g
X1
Size
3 x 2
4 x 2
C
Wt.
6
6
73/8 10
8
14
6 10
8
14
6 10
7
22
8 26
11 47
11 73
X1
E G
X
Wt.
2 7 9 10
3
7
9
14
1
G1
x
g
C
Wt.
6
6
73/8 11
8
18
6 11
6
7
15
7
11
8 28
11 51
13
-
Size
2 x 1
2 x 2
3 x 1
3 x 2
4 x 1
4 x 2
X
8
8
9
9
9
9
E G
4
6
4
6
4
7
4
7
5
7
5
7
Wt.
8
8
10
10
12
12
24
sv FITTINGS
x1
X
X
X1
*XH only
Double Wye
Wye
Part No. Size
X
X1 G
001560 2
8
4
4
001577 3 x 2 9
5
43/16
001584 3
10 5
5
001591 4 x 2 9
5
35/8
001607 4 x 3 10
6
47/16
001614 4
12
6
5
001621 5 x 2 9
6
31/8
001638 5 x 3 10
7
37/8
001645 5 x 4 12
7
411/16
001652 5
13 8
5
001669 6 x 2 9
7
29/16
001676 6 x 3 10
7
33/8
001683 6 x 4 12
8
43/16
001690 6 x 5 13
8
415/16
001706 6
15
9
5
383482 8x2 10 8
31/8
387848 8 x 3 12
9
315/16
001713 8 x 4 13
9
4
001720 8 x 5 15
10
5
001737 8 x 6 16
10
65/16
001744 8
19 1113/16 711/16
001751 10 x 3 12
10
2
001768 10 x 4 13
111/8
39/16
001775 10 x 5 15
115/8
45/16
001782 10 x 6 16
12
51/8
001799 10 x 8 19
137/16
6
001805 10 22 14
8
001812 12 x 4 15
127/16
41/8
001829 12 x 5 16
1215/16
47/8
001836 12 x 6 18
137/16
511/16
001843 12 x 8 21
14
71/16
001850 12 x 10 24
1513/16
89/16
001867 12 27
167/8
101/8
001874 15 x 4 15
15
2
001881 15 x 6 18
15
4
001898 15 x 8 21
171/16
53/8
001904 15 x 10 24
181/8
67/8
001911 15 x 12 27
193/16
87/16
001928* 15
31 20
10
Wt.
8
9
14
13
13
18
14
17
19
23
17
17
21
31
36
31
33
45
46
53
65
56
64
65
76
85
107
76
75
84
110
159
189
138
171
207
213
242
333
Size
2
3 x 2
3
4 x 2
4 x 3
4
5 x 2
5 x 3
5 x 4
5
6 x 2
6 x 3
6 x 4
6 x 5
6
8 x 2
8 x 4
8 x 5
8 x 6
8
G
4
43/16
5
311/16
4
5
33/8
4
4
5
211/16
31/8
4
51/16
5
31/8
4
5
65/16
711/16
H
73/8
83/16
101/16
83/16
101/16
121/16
83/8
101/16
75/16
119/16
83/16
911/16
121/16
143/16
161/16
95/8
131/16
155/8
175/8
219/16
X
8
9
10
9
10
12
9
10
12
13
9
10
12
13
15
10
13
15
16
19
X1
47/8
5
7
6
7
9
6
8
9
11
7
8
10
11
127/8
8
11
12
137/8
17
Wt.
8
12
14
12
18
22
15
22
24
30
17
19
23
40
45
34
44
50
60
85
x1
X
123/16
X1
Wt.
121/4 20
sv FITTINGS
x1
x1
2
Inlet
g1
X
X1
X
8
9
10
9
10
12
12
12
15
Wt.
12
14
20
17
23
34
31
52
80
x1
45
H Branch
Part No.
002222
002239
002246
002253
002260
Size
2
3x2
3
4 x 3
4
X
X1
J G
Wt.
10
6
4 4
8
1011/16 6 5 43/16 10
127/16 77/16
5 5 12
123/16 75/16 6 4 17
1315/16 811/16
6 5 18
j
2
Inlet
45
g1
X
45
x1
X1
g
g1
G
G 1
5 10
X
12
X 1
Wt.
6 18
45 Offset
Part No.
003540
003557
003564
Size
4 x 4
4 x 6
4 x 8
X G1
11
4
13
4
15
4
J
4
6
8
Wt.
12
15
18
H
X
X 1
Wt.
10 12 63/4 32
F
x
Pipe Plug
Wt.
3
Part No.
Size
004035 2
004042 3
004059 4
004066 5
004073 6
004080 8
004097 10
004103 12
004110* 15
F
3
3
4
4
4
4
4
5
5
Wt.
1
2
4
6
6
11
17
25
35
TAPPED SPIGOT
Part No.
111719
Size
4 x 2
X
4-1/4
Wt.
5
*XH only
26
sv FITTINGS
G
X
E
INCREASER
Part No.
045939
003809
003816
003823
003830
277248
003847
384724
003854
003861
Size
2 x 4
3 x 4
4 x 5
4 x 6
4 x 8
5 x 6
6 x 8
8 x 10
10 x 12
12 x 15
X
9
9
9
9
12
9
12
12
12
12
Wt.
10
9
12
16
25
13
24
44
60
95
Size
3 x 4"
4 x 5"
4 x 6"
X
24
30
30
Wt.
14
24
24
Reducer
Part No.
003588
003595
003601
383598
383604
003618
003625
003632
003649
003656
003663
003670
003687
003694
383369
003700
003717
003724
003731
003748
003755
003762
003779
003786
003793
Size
3 x 2
4 x 2
4 x 3
5 x 2
5 x 3
5 x 4
6 x 2
6 x 3
6 x 4
6 x 5
8 x 4
8 x 5
8 x 6
10 x 4
10 x 5
10 x 6
10 x 8
12 x 4
12 x 6
12 x 8
12 x 10
15 x 6
15 x 8
15 x 10
15 x 12
X
4
5
5
5
5
5
5
5
5
5
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
Wt.
5
6
7
6
7
8
9
9
11
9
13
14
17
20
21
24
27
32
34
37
38
52
54
56
65
E
7
8
G
6
6
J
67/16
67/16
Wt.
29
35
Two-Way Cleanout
(Memphis code)
Part No.
Size X
E G
Wt.
003465 4 221/8 93/8 12 35
Size
2 x 4"
X
24
Wt.
15
Part No.
Size G
127232 4 3
X
Wt.
47/8 2
Wt.
4
6
8
11
23
37
47
87
sv FITTINGS
C
X1
J
J
X
P Trap
Part No.
Size X
004486 2 9
004493 3 12
004509 4 14
004516 5 15
004523 6 17
004530 8 221/16
004547 10 25
X
J
Wt.
4
6
5
12
6
18
7
23
8
33
11 87
143/8 113
X
9
12
14
17
J
6
7
8
91/2
Wt.
9
18
29
41
A
J
X1
Running Trap
w/double Hub Vent
Part No. Size (Vent)
004707 3 (3-3)
004714 4 (4-4)
004738 5 (4-4)
004721 5x4 (4-4)
004745 6 (4-4)
004752 6 (6-6)
053880 8 (4-4)
004769 8 (6-6)
004776 10 (8-8)
004783 12 (10-10)
004790 15 (12-12)
X
X1 C
J
Wt.
15 2 5 5 23
17 3 6
6 37
19 31/2 7 7 47
19 3 7 7 43
21 4 8
8 54
21 4 8
8 62
21 4 8
8 99
275/8 5 10 11 100
315/8 6 12 13 187
38 7 15 15 288
45 8 18 18 460
J
X
X
9
12
14
J
4
5
6
A
Wt.
3
8
3 13
3
18
Running Trap
w/SinGle Hub Vent
Part No. Size
004615 3
004622 4
004639 5
004646 6
004660 8
(Vent) X
(3) 15
(4) 17
(4) 19
(4) 21
(6) 275/8
X1
2
3
3
4
5
J
5
6
7
8
11
Wt.
16
28
40
46
110
A B
C
Wt.
14
6
6
7
16
8
6 12
14 7 6 13
157/8 9 57/8 17
163/16
8 6 21
18
10 6 37
Running Trap
Part No.
Size X
004578 4 17
004585 6 21
C
J
6 6
8 8
Wt.
19
65
28
sv FITTINGS
Part No.
Pipe Size
023210 2
023234 3
023258 4
023272 4
023296 5
023319 6
023333 8
023357 10
023388 12
023364* 15
Tap Size
1
2
3
3
4
5
6
6
6
6
A
3
3
3
4
4
4
4
4
5
5
Wt.
1
2
3
3
4
5
11
18
24
45
*XH only
Tap Size
1
2
3
3
4
5
6
6
6
6
A
3
3
3
4
4
4
4
4
5
5
Wt.
1
3
4
4
5
6
13
20
26
47
*XH only
3 Tap
Size
3 x 4
A
24
B
63/8
Closet Bends
Wt.
18
Part No.
02896
02894
02898
02904
02908
02914
02912
02924
02932
02934
02936
02938
02940
02944
02946
02950
02954
Size
4 x 4 x 14
4 x 4 x 16
4 x 4 x 18
4 x 6 x 12
4 x 6 x 15
4 x 6 x 16
4 x 6 x 18
4 x 10 x 12
4 x 10 x 15
4 x 10 x 16
4 x 10 x 18
4 x 12 x 12
4 x 12 x 14
4 x 12 x 16
4 x 12 x 18
4 x 16 x 16
4 x 18 x 18
Wt
11
15
13
12
15
13
16
16
18
16
19
14
15
16
21
22
25
Part No.
Size
026136 4
026146 4
026156 4
026167 4
Length
12
14
16
18
Wt.
14
16
16
19
D
B
A
D
Size
4 x 3 x 6 x 12
4 x 3 x 6 x 15
4 x 3 x 6 x 18
4 x 3 x 10 x 12
4 x 3 x 10 x 15
4 x 3 x 10 x 18
4 x 3 x 12 x 12
4 x 3 x 16 x 16
4 x 3 x 18 x 18
Wt.
10
10
13
12
16
16
16
18
25
Part No.
022848
022855
8003
8013*
022879
022886
8005
022930*
022909
8017
8015
8018
022947
8007
8011
8019
Size x Height
4 x 1
4 x 1
4 x 2
4 x 2
4 x 2
4 x 3
4 x 4
4 x 4
4 x 5
4 x 6
4 x 2, 1 Offset
4 x 4, 2 Offset
4 x 3, 3 Reducing
4 x 2
4 x 4 x 4
4x3 x 2
A
6
6
6
63/8
6
6
6
61/8
6
6
6
6
6
6
6
6
B
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
D
1
1
2
2
2
3
4
4
5
6
2
4
3
2
4
2
Wt.
2
2
2
2.8
3
4
5
5
6
6
2.5
4.5
3
3
4
3
sv products
TYSEAL LUBRICANT
Part No.
005117
005124
TYSEAL
Part No. Size Wt. Ea. Carton Pallet
Lbs. Quantity Wt.
004875 2 0.3 60
18
004882 3 0.4 40
16
004899 4 0.6 40
24
004905 5 1.2 30
35
004912 6 1.4 30
40
004929 8 1.6 20
30
004936 10 2.0 10
18
004943 12 2.5 10
22
014959 15 3.8 10
38
Quantity Wt.
2880 900
1600 675
1280 805
600 735
600 835
320 151
270 520
270 630
120 490
Size
Quart
Gallon
Wt.
2.5
9
Lubri/Fast Lubricant
Pa rt No.
Size
005148 Quart
Wt.
2.5
LUBRI/FAST
The unique LUBRI/FAST formula makes
joining TY-SEAL gaskets easier and faster
because its so slick! Applied as a liquid, LUBRI/
FAST actually reduces joining forces required;
then it literally fastens the joint.
LUBRI/FAST is applied with an ordinary paint
brush. It may be used for joining all
pipe and fittings, and is required for joining all
larger diameters 5 through 15.
EZTITE
Part No. Size
004950 2
004967 3
004974 4
004981 5
004998 6
TyTools
Quantity Wt.
2880 900
1600 675
1280 805
600 735
600 835
Part No. Description
005223 4 w/ 4 x 2 & 4 x 3 adapter
005438 6" w/ 6 x 4 adapter
005580 8" w/ 8 x 6 adapter
30
INSTALLATION PROCEDURES
SV Hub & Spigot Installation Instructions
Materials Needed
Proper, approved equipment and attire:
Installation
1. Clean the hub and pipe or fitting end to be joined. They should be free of dirt, mud, gravel, or other
foreign material.
2. Insert the gasket into the hub. When joining 5 inches or larger pipe and fittings, apply Lubri/Fast Adhesive
Lubricant to the inside surface of the hub before inserting the gasket.
3. Lubricant the inside surfaces of the gasket and the outside of the spigot end to be joined using a brush.
(Use TYSeal Lube for sizes 2 inches through 4 inches. Use Lubri/Fast Adhesive Lubricant for sizes 5 inches
through 15 inches).
4. Align the pipe and/or fittings to be joined. Push or pull the pipe or fitting spigot into the hub. You will feel
the pipe or fitting bottom out at the hub. The assembly tool of your choice may be used.
Note: If joining a cut piece of pipe, the sharp edges of the pipe must be peened with a hammer or filed to remove
the sharp edge. Failure to remove the sharp edge on cut pipe will make assembly difficult.
Note: All gaskets specified meet or exceed the requirements of ASTM C564 and ASTM C1553
INSTALLATION PROCEDURES
Caulking Instructions
Caulking Procedure
1. Insert the spigot end of pipe or fitting into the hub of pipe or fitting to be joined after wiping the hub and
spigot with a clean cloth to assure the hub and spigot are clean and dry.
2. Yarn the oakum into the joint using a yarning iron. Some oakum comes in twisted lengths and may need
to be separated into individual strands before yarning. Yarn and pack the oakum tightly using a packing
iron to a depth of one inch below the top of the joint. Tightly packed oakum is essential for a leak free joint.
Note: After packing, make sure that no oakum fibers are sticking up into the area the lead will occupy. Fibers
in the lead area can cause leaks.
3. After heating lead pot to a cherry red color, clean dross off the top of the lead and fill your ladle with clean,
molten lead. Quickly pour the lead into the joint with one continuous pour, filling the joint completely.
4. After the lead has solidified, the joint must be caulked to set the lead. Using your outside caulking iron,
place the iron against the inner edge of the hub and caulk the lead completely around the circumference
of the joint. After caulking with the outside iron, you are ready to caulk using the inside iron. The inside iron
should be placed against the pipe. Caulk the lead completely around its circumference.
Note: Care should be taken to not crack the hub by caulking too heavily. Proper safety equipment and attire
are required. AB&I Foundry does not recommend the use of lead as it has been found to be hazardous to your
health and the environment.
32
warrant y
AB&I products are guaranteed to be free from defects in material and workmanship, and to conform to applicable standards
and requirements. AB&Is liability is limited to the replacement of defective material acknowledged by AB&I to be defective to
be defective, and presented for claim within reasonable time limits. Material found defective will only be replaced; no labor
charges or damages will be allowed.
IMPORTANT NOTICE:
AB&I Foundry will not be held responsible for any delays caused by work stoppage, trucking delays, raw material availability,
acts of God or other unnatural causes beyond AB&I Foundrys immediate control.
Notes
since 1906
From humble beginnings over a century ago, AB&I has grown into
a leading producer of cast iron pipe, fittings, and custom castings.
Founded in 1906 by Joseph Boscacci in his backyard, the foundry
had its start producing decorative street lamps and brass statues
to replace those destroyed in San Franciscos Great Earthquake
and Fire. As the foundry grew, it began producing sash weights
and other cast iron and brass products.
With World War II approaching, it moved to its current location
and modernized into a highproduction foundry. Managed by the
founders sons, the Boscacci Brothers began producing 9ton
submarine nets which spanned major ports on the West Coast,
including San Francisco Bay.
The post-war boom was led by unprecedented growth in construction, so foundry President Arnold Boscacci decided to begin
making soil pipe and fittings on a large scale. To foster standards and higher quality, AB&I helped launch the Cast Iron Soil
Pipe Institute (CISPI) and pioneered the production of no-hub pipe and fittings.
Today, AB&I is a thoroughly modern, technologydriven foundry committed to environmentally responsible manufacturing
and team member safety. The same focus on the Golden Rule, personal relationships and customer service that built AB&I
over the past century remains at the center of the companys culture, ensuring that AB&I will continue to be recognized as
The Foundry of the Future.
Joseph Boscacci
Allan Boscacci
Arnold Boscacci
Kurt Winter
34
We understand that product availability and fast delivery are critically important to distributors and contractors alike.
Thats why AB&I has established a nationwide network of distribution centers that put the full range of AB&I products
in close proximity.
We certify that the cast iron soil pipe and fittings bearing our AB&I and CI markings are American manufactured
and conform to the following specifications and reference standards:
ASTM A888
IAPMO File No. 3270
CISPI 301
Certified by NSF to CISPI 301
& ASTM A74
CISPI 310
DOD4270
ANSI A112.5.1
ASTM A74, SV Hub & Spigot
Reference Standard
ASTM C564
CISPI H74
Federal Specification WWP 401F
rev 12/14
AB&I Foundry
7825 San Leandro Street
Oakland, CA 94621
800/GOTIRON (4684766)
Fax: 510/6328035
ABIFoundry.com
LA Service Center
15006 Nelson Avenue
City of Industry, CA 91744
800/356IRON (3564766)
Fax: 626/3338681