Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

Klamflexproduct Brochure

Download as pdf or txt
Download as pdf or txt
You are on page 1of 24

PIPE COUPLINGS (PTY) LTD

sales@klamflex.com www.klamflex.com

PRODUCT MANUAL

COUPLE WITH CONFIDENCE


The Largest Manufacturer of Pipe Couplings, Flange Adaptors, Stepped Couplings, Dismantling Joints and related products in the Southern Hemisphere. Still Coupling since 1962.
ARPAL
ISSUE: 0610

KEY FEATURES
1 HOTROLLED ASYMMETRIC STEEL T SECTION
(BS EN 10025 : 2004)
Free from circumferential welds providing integral strength.The offset T profile facilitates a perfect seal on the gasket and straight line bolt travel.

2 PROFILED ROLLED STEEL SLEEVE


(SANS 1431 : 2003 / BS EN 10025 : 2004)
Allows angular deflection of the pipe ends due to a thinner mid section. Rolled sleeve ends match the gasket profile exactly

3 EPDM GASKET with SELF CENTERING LIP


(SABS 974 : 1986 / BS EN 681-1 : 1996)

4 D CUP AS WELL AS CUP SQUARE HEAD LOW CARBON STEEL BOLTS


(SABS 1143 : 1977 / BS 970 - 1 : 1996)

3 1 2 4

5 NON TOXIC COATINGS AND GASKETS WITH BS 6920 CERTIFICATION

COMPANY PROFILE
Established in 1962 the company is now the largest manufacturer of pipe couplings, flange adaptors, stepped couplings, dismantling joints and related products in the Southern Hemisphere. During the period to 1992 the company manufactured Viking Johnson products under a licence agreement with the Victaulic company of the U.K., the termination of which saw the emergence of Klamflex as a leading international brand name.

LISTINGS
ISO 9002 listed since 1986 Upgraded to ISO 9001 in July 2003. RVA : Accreduted Listing by the Dutch Council for certification. SANAS endorsed ISO 9001 listing. ARPAL approved since August 2002. South African Bureau of Standards Certificate of Registration. WRAS APPROVED RUBBER - EPDM - COMPONENTS. WRAS APPROVED COATINGS, PAINTS AND LININGS FACTORY APPLIED - PIPE AND FITTINGS COATINGS

INDEX
PAGE
1 2 3 4

TOPIC
RANGER COUPLINGS & FLANGE ADAPTORS RANGER STEPPED COUPLINGS RANGER END CAPS

QUALITY CONTROL
ISO 9001 : 2000 Listed Manufacturer since 1986 In-house production design, utilising the latest CAD systems, supported by technical staff and finite element analysis programmes. Stringent raw material quality control and certification from international test laboratories. Product approvals held for many countries worldwide. In house quality inspection at all phases of production, with Hydrostatic Test Facilities Millions of Klamflex products installed worldwide bear testament to a long history of quality production.

5 6 7 8 9 10
STEPPED COUPLINGS DEDICATED COUPLINGS

11 12 13
DEDICATED FLANGE ADAPTORS

THE MANUFACTURING PROCESS


Products are manufactured in accordance with AWWA C219-01 in our 7000 sq m factory site which has recently been upgraded with the installation of a new plant and equipment including the following: The most modern fusion bonded epoxy plant available, for spray and fluidised bed application. A state of the art CNC controlled sleeve rolling line. A customised follower rolling machine, CNC controlled for high precision production and quality. The latest in plasma cutting equipment for fabricated specials.

14 15 16 17 18 19 20
SOCKET STEEL FITTINGS JUNIOR COUPLINGS PIPE OD CHART GRIPPER FLANGE ADAPTERS DISMANTLING JOINTS

RANGER COUPLINGS & FLANGE ADAPTORS


KLAMFLEX Ranger Products, in the form of wide range couplings and flange adaptors, are designed to join pipes of various outside diameters with the same or different nominal bore. Because of the wide range tolerance on O.D. (Up to 23mm) a single KLAMFLEX Ranger Coupling can connect steel, ductile iron, UPVC, cast iron, asbestos cement and other rigid pipe materials. This eliminates on site guesswork and stock range holdings are optimised. The ability of KLAMFLEX Ranger Couplings to join dissimilar pipe materials is a bonus feature in both repair or permanent situations. Corrosion protection for KLAMFLEX Ranger Products is available in Fusion Bonded Epoxy, Red Oxide Primer and Galvanised finish as standard. Optional coatings to customer specifications are available on request. KLAMFLEX Ranger Products have application in the reticulation of potable water, waste water and sewage as well as in the marine, mining, oil, gas and general engineering sectors. Because of the KLAMFLEX Rangers wide range tolerance on pipe O.D., on site guesswork is eliminated and stock range holdings are optimised. Moulded, circumferentially ribbed or specially profiled gaskets, generally in EPDM or NBR materials, provide for smooth installation by minimising contact friction. KLAMFLEX Ranger Gaskets are designed to provide a leak tight seal across the O.D. range per nominal size and still allow for thermal expansion and contraction of the pipe up to 5mm per gasket, facilitated through gasket deformation. To facilitate installation and avoid possible creep under rising load, it is strongly recommended that the KLAMFLEX Ranger Rubber Sealing Gaskets are well lubricated with a suitable non toxic soap solution before the introduction of the pipe. This practice should obviate the need for re tightening the fasteners after pressure testing, and further facilitate the seating of the joint components. KLAMFLEX Ranger Products can be manufactured with double or full sleeves to prevent end pullout on PE, HDPE and GRP pipes.

KLAMFLEX RANGER COUPLING


SUITABLE FOR JOINING PIPES OF SIMILAR OR DISSIMILAR MATERIALS WITHIN THE O.D. RANGE. USE AS A STRAIGHT COUPLING, OR IN PLACE OF A STEPPED COUPLING WITHIN THE O.D. RANGE
NOM.BORE PIPE O.D. APPROX (mm/inch) RANGE(mm) MASS (kg) 50/2 65/2.5 80/3 100/4 125/5 150/6 175/7 200/8 225/9 250/10 250/10 300/12 300/12 350/14 400/16 450/18 500/20 600/24 59-72 72-85 88-103 109-128 138-153 159-182 192-210 218-235 230-247 250-267 272-289 315-332 322-340 374-391 417-437 480-500 526-546 630-650 2.9 3 4.2 4.6 4.8 7 9.2 10.2 16.6 18.2 16.2 23.6 19.8 28.2 26.4 33 35 46.8 PIPE MATERIAL SUITABILITY STEEL (imperial+metric), UPVC, DI, CI, AC (imperial), ABS/DWV STEEL (imperial+metric), UPVC, DI, CI, AC (imperial), ABS/DWV STEEL (imperial+metric), UPVC, DI, CI, AC (imperial), ABS/DWV STEEL (imperial+metric), UPVC, DI, CI, AC (cod), AC (imperial) STEEL (imperial+metric), UPVC, DI, CI, AC (cod), AC (imperial) STEEL (imperial+metric), UPVC, DI, CI, AC (cod), AC (cid), AC (imperial) STEEL (imperial+metric), UPVC, CI, AC (imperial) STEEL (imperial+metric), UPVC, DI, CI, AC (cod), AC (cid), AC (imperial), GRP STEEL (imperial+metric), DI, AC (cod), AC (cid), AC (imperial) STEEL (imperial+metric), UPVC, AC (cid) STEEL (imperial+metric), UPVC, DI, CI, AC (cod), AC (cid), AC (imperial), GRP STEEL (imperial+metric), UPVC, DI, GRP STEEL (imperial+metric), DI, AC Class 12 DI, GRP, AC Class 6 DI, AC Class 6 and 12 DI, AC Class 6 and 12, UPVC DI, AC Class 6 and 12 DI, AC Class 6, Imperial CI/CL

MAX WORKING PRESSURE: 16 BAR SETTING GAP: 19mm TOLERANCE ON ANGULAR DEFLECTION: 6 DEGREES EXPANSION AND CONTRACTION RANGE: 0-10 mm RECOMMENDED BOLT TORQUE: 60-80 mm

KLAMFLEX RANGER FLANGE ADAPTOR


APPROX NOM. BORE PIPE O.D. FLANGE DRILLING COMPATIBILITY (mm/inch) RANGE (mm) MASS (kg) 3.4 50/2 59-72 50mm: BS 10 Table D,E, & F: ANSI 150: BS4504: 6/3, 10/3, 16/3. SABS 1123: 600/3, 1000/3, 1600/3 65/2.5 80/3 100/4 125/5
150/6

72-85 88-103 109-128 138-153 159-182 192-210 218-235 250-267 272-289 315-332 322-340 374-391 417-437 480-500 526-546 630-650

3.8 5.4 5.4 6.8 8 9 9.8 16.2 15.2


22.4

65mm: BS 10 Table F: BS4504:10/3, 16/3: SABS 1123:1000/3, 1600/3 80mm: BS 10 Table D,E, & F: ANSI 150: BS4504: 6/3, 10/3, 16/3. SABS 1123: 600/3, 1000/3, 1600/3 100mm: BS 10 Table D,E, & F: ANSI 150: BS4504:10/3, 16/3. SABS 1123: 1000/3, 1600/3 125mm: BS 10 Table D,E, & F: ANSI 150: BS4504: 6/3, 10/3, 16/3. SABS 1123: 600/3, 1000/3, 1600/3. 150mm: BS 10 Table D & E: ANSI 150: BS4504: 10/3, 16/3. SABS 1123: 1000/3, 1600/3. 200mm: BS 10 Table D & E: ANSI 150: BS4504: 10/3, 16/3. SABS 1123: 1000/3, 1600/3. 200mm: BS 10 Table D & E: ANSI 150: BS4504: 10/3, 16/3. SABS 1123: 1000/3, 1600/3. 250mm: BS 10 Table E: BS4504: 10/3, 16/3. SABS 1123: 1000/3, 1600/3. To customer specifications PN 10, PN 16, TABLE E, ANSI 150 lb PN 10, PN 16 PN 10, PN 16 PN 10, PN 16 PN 10, PN 16, ANSI 150 lb PN 10, PN 16, ANSI 150 lb

175/7 200/8 250/10 300/12 300/12 350/14 400/16 450/18 500/20 600/24

19 25.4
28.6

32.8 41.2 51

MAX WORKING PRESSURE: 16 BAR SETTING GAP: 19mm TOLERANCE ON ANGULAR DEFLECTION: 3 DEGREES EXPANSION AND CONTRACTION RANGE: 0-5 mm RECOMMENDED BOLT TORQUE: 60-80 mm

RANGER STEPPED COUPLINGS


KLAMFLEX Ranger Stepped Ranger Couplings are designed to join pipes of various outside diameters with different nominal bores. KLAMFLEX Ranger Stepped Ranger Couplings can connect steel, ductile iron, UPVC, cast iron, asbestos cement and other rigid pipe materials. Corrosion protection is available in Fusion Bonded Epoxy and Red Oxide Primer as standard. Optional coatings to customer specifications are available on request. Gasket material is EPDM and designed to provide a leak tight seal across the O.D. range allowing for thermal expansion and contraction of the pipe. It is strongly recommended that the rubber sealing gaskets are well lubricated with a suitable non toxic soap solution before the introduction of the pipe. This practice will obviate the need for re-tightening the fasteners after pressure testing, and further facilitate the seating of the joint components.

NOMINAL BORE (mm)

PIPE OD RANGE (mm)

APPROX MASS (kg)

50/65 80/100 100/125 125/150 150/175 175/200 200/200+ 250/250+

59-72 / 72-85 88-103 / 109-128 109-128 / 138-151 135-153 / 159-182 159-210 / 192-210 192-210 / 218-235 218-232 / 230-247 250-267 / 272-289

2.6 4.6 5.2 6.4 7.2 12.4 16.8 22.4

RANGER END CAPS


KLAMFLEX Ranger End Caps are manufactured from our Ranger Couplings, therefore giving you the versatility of using them on a variety of different pipe ODs and materials. KLAMFLEX Ranger End Caps are therefore suit-

able for all popular standard pipe sizes ranging from 50mm to 300mm and are designed for the use in air, water, sewer, and gas pipelines up to 16 Bar.
KLAMFLEX Ranger End Caps are supplied with

and EPDM rubber seal and coating can either be Red Oxide or Fusion Bonded Epoxy.
KLAMFLEX Ranger End Caps can be manufactured with double sleeves to prevent end pullout on PE, HDPE and GRP pipes.

RANGER END CAPS


NOM. BORE PIPE O.D. RANGE (mm) (mm) 50/2 65/2.5 803 100/4 125/5 150/6 175/7 200/8 225/9 250/10 250/10 300/12 59-72 72-85 88-103 109-128 138-153 159-182 192-210 218-235 230-247 250-267 272-289 322-332 APPROX MASS (kg) 3.1 3.3 4.5 4.9 5.2 7.4 9.6 10.6 17.4 18.8 17.1 24.2 PIPE MATERIAL SUITABILITY STEEL (imperial+metric), UPVC, DI, CI, AC (imperial), ABS/DWV STEEL (imperial+metric), UPVC, DI, CI, AC (imperial), ABS/DWV STEEL (imperial+metric), UPVC, DI, CI, AC (imperial), ABS/DWV STEEL (imperial+metric), UPVC, DI, CI, AC (cod), AC (imperial) STEEL (imperial+metric), UPVC, DI, CI, AC (cod), AC (imperial) STEEL (imperial+metric), UPVC, DI, CI, AC (cod), AC (cid), AC (imperial) STEEL (imperial+metric), UPVC, CI, AC (imperial) STEEL (imperial+metric), UPVC, DI, CI, AC (cod), AC (cid), AC (imperial), GRP STEEL (imperial+metric), DI, AC (cod), AC (cid), AC (imperial) STEEL (imperial+metric), UPVC, AC (cid) STEEL (imperial+metric), UPVC, DI, CI, AC (cod), AC (cid), AC (imperial), GRP STEEL (imperial+metric), UPVC, DI, AC (cid 24), GRP

MAX WORKING PRESSURE: 16 BAR RECOMMENDED BOLT TORQUE: 60-80 mm

KLAMFLEX DEDICATED COUPLINGS


KLAMFLEX Dedicated Couplings join pipes of the same outside diameter. Couplings up to 324mm OD are delivered pre-assembled. Larger sizes are delivered ready for site assembly on the pipe. KLAMFLEX Couplings can be manufactured to suit both metric and imperial dimensions for Steel, uPVC, Ductile Iron, G.R.P., Fibre Cement, Stainless Steel, Aluminium Alloys and virtually all other rigid pipe materials. Klamflex Couplings can be manufactured with double sleeves to prevent end pull out on HDPE and GRP pipes. The sizes shown in the schedules of dimensions are for guide purposes. KLAMFLEXS manufacturing methods enable us to supply any size, including non-standard sizes. KLAMFLEX Couplings are pressure rated to the appropriate pipe standards. Working pressure is generally two-thirds of maximum test pressure shown in the schedules of dimensions. These pressures apply to a buried line with adequate thrust blocks or to pipelines above ground anchored at ends and at all changes of direction also secured against side thrusts at each joint. KLAMFLEX Couplings, though capable of accommodating reasonable expansion and contraction, do not mechanically prevent separation of pipe ends subject to end thrust, and this must be prevented by other means. To prevent separation of pipe ends, harness assemblies consisting of lugs for welding to adjacent pipes, and connecting tie rods can be supplied. Pipes must be anchored against end load, particularly when the pipeline is laid above ground. A buried pipeline normally needs anchoring only at abrupt changes in direction and at junctions or stop ends. Gaskets are of a EPDM rubber and are suitable for water and sewerage services, chemicals and dilute acids in the temperature range 50C to +90C. Other sealing materials can be used, increasing temperature range to greater than 90C. These materials are available on request.

Klamflex Gaskets and Epoxy coatings are certified non toxic for potable water in accordance with BS 6920.

KLAMFLEX HARNESSED COUPLINGS


One method of preventing pipe separation is the use of a harness assembly, consisting of lugs for welding to steel pipes and connecting tie rods. Cast iron pipes can sometimes be harnessed through the use of additional flanges cast onto the pipe ends. In most cases we can also supply KLAMFLEX Flange Adaptors complete with harness assembly. Four or more flange bolts are replaced with long tie bolts. N.B. KLAMFLEX Pipe Couplings supply the lugs, nuts, bolts and the couplings/adaptor.between coupling and plinth to permit full assembly of all bolts.

KLAMFLEX CENTRE REGISTER


The centre sleeve can be supplied with or without internal centre register studs. The registers provide a locating stop to centre the coupling which facilitates the laying of long pipe runs. Centre registers also prevent the possibility of the coupling creeping at positions where there are continual axial movements. Couplings without centre register are necessary for fitting closing lengths on a pipeline, or for withdrawing any particular length for cleaning or inspection. Locating plugs may be fitted to couplings to act as removable centre registers, thus providing the advantage of both types. KLAMFLEX Centre registers are used in couplings above ground where there may be a tendency for the coupling to creep e.g. on an incline. KLAMFLEX Centre registers are of two types: A (above 350mm) removable, used where the coupling can be moved along the pipe to allow the pipe to be inspected, and B (all sizes) fixed, used where there is no need to remove couplings.

KLAMFLEX ANCHORED COUPLINGS


With brackets welded to the centre sleeve, couplings can be bolted directly to the supporting structure. Brackets are designed to withstand the thrust produced by maximum angularity and will support a 10m long pipe full of water (up to DN 1 500mm) We recommend the use of locating lugs with anchored couplings to help resist pipe movement. On steep slopes, special consideration should be given to anchorage. N.B. 1. Harness rods are not normally used with anchored couplings. 2. Anchor brackets are not designed to withstand the full longitudinal or lateral forces produced by internal pressure. 3. Ensure that sufficient clearance is allowed between coupling and plinth to permit full assembly of all bolts.

Where locating plugs are used, the setting gap should be increased by 9,5mm for sizes up to 324mm and 12.5mm for sizes above 324mm OD to avoid contact with the plugs.

KLAMFLEX DEDICATED COUPLINGS


DUCTILE IRON PIPE ISO 2531:1991 BS 4772:1988
FOR 10 & 16 BAR WORKING PRESSURE

NOM PIPE BORE OD

MINIMUM TOLERANCE OD OF COUPLING SLEEVE STANDARD APPROX. PIPE END ENDRING LENGTH ON PIPE OD WIDTH TEST PRESSURE MASS FOR PREPARED PREPARED AT: LENGTH END L A B D

(mm) (mm)
80 100 125 150 200 250 300 350 400 450 500 600 700 800 900 1000 1100 1200 1400 1600 1800 2000 98 118 141 170 222 274 326 378 429 480 532 635 738 842 945 1048 1152 1255 1468 1668 1875 2082

(mm)
+1.0 +1.0 +1.0 +1.0 +1.0 +1.0 +1.0 +1.0 +1.0 +1.0 +1.0 +1.0 +1.0 +1.0 +1.0 +1.0 +1.0 +1.0 +1.0 +1.0 +1.0 +1.0 -3.0 -3.0 -3.0 -3.0 -3.5 -3.5 -3.5 -3.5 -4.0 -4.0 -4.0 -4.5 -4.5 -4.5 -5.0 -5.0 -6.0 -6.0 -6.0 -6.0 -6.0 -6.0

(mm)
100 100 100 100 100 100 100 150 150 150 150 150 150 150 150 150 150 150 150 150 150/ 300 150/ 300

(mm)
158 200 220 260 308 364 414 480 531 582 634 737 840 944 1047 1150 1268 1371 1578 1784 1989 2196

(mm)
178 178 178 178 178 178 178 262 262 262 262 262 262 262 262 262 262 262 262 262 262/ 450 262/ 450

(mm)
102 102 102 102 102 102 102 178 178 178 178 178 178 178 178 178 178 178 178 178 178/356 178/ 356

10 bar 16 bar working working pressure pressure


15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24

(kg)
3.6 4.4 6.1 6 7.9 10.6 11.7 29.4 33.7 37 41.3 47.9 56.4 64 70.6 78.3 115 124.9 144.2 164.3 TBA TBA

FOR COUPLINGS OF 25 AND 40 BAR WORKING PRESSURE PLEASE CONTACT KLAMFLEX THE ABOVE TABLE INCLUDES SAMPLES OF THE SIZES AVAILABLE, PLEASE CONTACT KLAMFLEX FOR ANY OTHER SIZES UP TO 3500mm.

KLAMFLEX DEDICATED COUPLINGS


STEEL PIPES: ISO 2531:1991 BS 4772:1988
FOR 10 & 16 BAR WORKING PRESSURE

NOM PIPE BORE OD

MINIMUM TOLERANCE OD OF COUPLING SLEEVE STANDARD APPROX. PIPE END ENDRING LENGTH ON PIPE OD WIDTH TEST PRESSURE MASS FOR PREPARED PREPARED AT: LENGTH END L A B D

(mm) (mm)
50 65 80 100 125 150 150 200 225 250 250 300 350 400 450 500 550 600 650 700 750 800 850 900 950 1000 1050 1100 1200 1200 1400 1400 1500 1600 1600 1800 1800 2000 2100 2200 2400 2700 60.3 76.1 88.9 114.3 139.7 165.1 168.3 219.1 244.5 267 273 323.9 355.6 406.4 457 508 559 609.6 660 711.2 762 812.8 864 914.4 965 1016 1067 1118 1219 1235 1420 1422 1520 1620 1626 1820 1829 2020 2120 2230 2440 2740

(mm)
+0.8 +0.8 +0.8 +0.8 +1.6 +1.6 +1.6 +1.6 +1.6 +1.6 +1.6 +1.6 +1.6 +1.6 +1.6 +1.6 +1.6 +1.6 +1.6 +1.6 +1.6 +1.6 +1.6 +1.6 +1.6 +1.6 +1.6 +1.6 +1.6 +1.6 +1.6 +1.6 +1.6 +3 +3 +3 +3 +3 +3 +3 +3 +3 -0.8 -0.8 -0.8 -0.8 -0.8 -0.8 -0.8 -0.8 -0.8 -0.8 -0.8 -0.8 -1.6 -1.6 -1.6 -1.6 -1.6 -1.6 -1.6 -1.6 -1.6 -1.6 -1.6 -1.6 -1.6 -1.6 -1.6 -1.6 -1.6 -1.6 -3 -3 -3 -3 -3 -3 -3 -3 -3 -3 -3 -3

(mm)
100 100 100 100 100 100 100 100 100 100 100 100 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150/ 300 150/ 300 150/ 300 150/ 300 150/ 300

(mm)
134 150 158 174 220 246 246 308 338 360 364 414 458 509 559 610 661 712 762 814 864 915 966 1017 1067 1118 1169 1220 1335 1351 1536 1538 1636 1736 1742 1936 1945 2134 2234 2344 2554 2854

(mm)
178 178 178 178 178 178 178 178 178 178 178 178 262 262 262 262 262 262 262 262 262 262 262 262 262 262 262 262 262 262 262 262 262 262 262 262 262 262/ 450 262/ 450 262/ 450 262/ 450 262/ 450

(mm)
83 102 102 102 102 102 102 102 102 102 102 102 178 178 178 178 178 178 178 178 178 178 178 178 178 178 178 178 178 178 178 178 178 178 178 178 178 178/ 356 178/ 356 178/ 356 178/ 356 178/ 356

10 bar 16 bar working working pressure pressure


15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24 24

(kg)
2.2 2.7 3.3 4 6.1 5.4 5.4 7.9 10.6 11.4 10.6 11.6 28 31.3 35.5 39.6 42.9 46.3 49.4 53.7 58 61.3 65.4 68.6 72.9 76 79.4 83.6 121.8 123.2 140.4 140.7 150.2 160 160.6 178.7 179.4 TBA TBA TBA TBA TBA

FOR COUPLINGS OF 25 AND 40 BAR WORKING PRESSURE PLEASE CONTACT KLAMFLEX THE ABOVE TABLE INCLUDES SAMPLES OF THE SIZES AVAILABLE, PLEASE CONTACT KLAMFLEX FOR ANY OTHER SIZES UP TO 3500mm.

KLAMFLEX DEDICATED COUPLINGS


uPVC PIPES: SABS 966:1976 ISO 161:1978
FOR 10 & 16 BAR WORKING PRESSURE

NOM PIPE BORE OD

MINIMUM TOLERANCE OD OF COUPLING SLEEVE STANDARD APPROX. PIPE END ENDRING LENGTH ON PIPE OD WIDTH TEST PRESSURE MASS FOR PREPARED PREPARED AT: LENGTH END L A B D

(mm) (mm)
100 110 140 140 160 160 175 177.8 180 180 200 200 225 225 250 250 280 280 315 315 400 400 500 500

(mm)
+1.0 +1.0 +1.0 +1.0 +1.0 +1.0 +1.0 +1.0 +1.0 +1.0 +1.0 +1.0 -1.0 -1.0 -1.0 -1.0 -1.0 -1.0 -1.0 -1.0 -1.0 -1.0 -1.0 -1.0

(mm)
100 100 100 100 100 100 100 100 100 100 150 150

(mm)
163 220 242 267 267 289 318 343 373 408 502 602

(mm)
178 178 178 178 178 178 178 178 178 178 262 262

(mm)
102 102 102 102 102 102 102 102 102 102 178 178

10 bar 16 bar working working pressure pressure


15 15 15 15 15 15 15 15 15 15 15 15 24 24 24 24 24 24 24 24 24 24 24 24

(kg)
4.2 6.1 5.9 7.5 9.6 10 10.4 10.9 11.1 11.9 31 39.2

FOR COUPLINGS OF 25 AND 40 BAR WORKING PRESSURE PLEASE CONTACT KLAMFLEX THE ABOVE TABLE INCLUDES SAMPLES OF THE SIZES AVAILABLE, PLEASE CONTACT KLAMFLEX FOR ANY OTHER SIZES UP TO 2000MM.

KLAMFLEX DEDICATED COUPLINGS


FIBRE CEMENT PIPE FOR COD AND CID PIPE: SABS 1223:1985 ISO 160:1980
FOR 10 & 16 BAR WORKING PRESSURE

NOM PIPE BORE OD

MINIMUM TOLERANCE OD OF COUPLING SLEEVE STANDARD APPROX. PIPE END ENDRING LENGTH ON PIPE OD WIDTH TEST PRESSURE MASS FOR PREPARED PREPARED AT: LENGTH END L A B D

(mm) (mm)
50 100 150 150 250 300 300 300 600 600 600 600 1100 96 122 168 177 286 328 340 345 667 699 727 755 1188

(mm)
+0.6 +0.6 +0.6 +0.6 +0.6 +0.6 +1.0 +1.0 +1.0 +1.0 +1.0 +1.0 +1.2 -0.0 -0.0 -0.0 -0.0 -0.0 -0.0 -0.0 -0.0 -0.0 -0.0 -0.0 -0.0 -0.0

(mm)
100 100 100 100 100 100 150 150 150 150 150 150 150

(mm)
158 200 246 267 379 421 442 442 769 801 829 857 1304

(mm)
178 178 178 178 178 178 262 262 262 262 262 262 262

(mm)
102 102 102 102 102 102 178 178 178 178 178 178 178

10 bar 16 bar working working pressure pressure


15 15 15 15 15 15 15 15 15 15 15 15 15 24 24 24 24 24 24 24 24 24 24 24 24 24

(kg)
3.6 4.4 5.4 6.1 12 13.9 27.1 27.5 50 52.9 55.7 57.5 118.1

FOR COUPLINGS OF 25 AND 40 BAR WORKING PRESSURE PLEASE CONTACT KLAMFLEX THE ABOVE TABLE INCLUDES SAMPLES OF THE SIZES AVAILABLE, PLEASE CONTACT KLAMFLEX FOR ANY OTHER SIZES UP TO 2000MM.

KLAMFLEX STEPPED COUPLINGS


Where pipe ends of different outside diameters have to be connected, stepped couplings can be provided. These normally cover the difference between the outside diameters of pipes of different materials having a common nominal bore, or pipes of the same materials having different nominal bores. It is advisable to mark the pipe a known distance from the end when fitting a step coupling to enable inspection of movement. This will allow the inspector to ensure that no telescoping along the smaller diameter pipe has occurred. When this fitting is used as a coupling between two pipes with diameter differences exceeding 25mm it is essential to ensure that the stepped coupling cannot be forced along the smaller diameter pipe. Scheduled sizes will not normally require such precautions, but others may. Regular inspection of a pipe previously marked, is normally all that is required. Alternatively, where this cannot be arranged, a mechanical means should be employed. Pressure rating for stepped couplings are equivalent to the rating specified in the straight coupling schedules, for the larger of the two OD's. In the case of ductile iron, AC and uPVC pipes, the pressure rating will match the pipe rating. KLAMFLEX Stepped Couplings can be manufactured with full sleeves to prevent end pullout on PE, HDPE and GRP pipes.

10

Where pipe OD sizes are negligible

KLAMFLEX STEPPED COUPLIINGS


NOM BORE PIPE 1 NOM BORE PIPE 2 PIPE OD1 PIPE OD2 DESCRIPTION L MIN A1 A2 B D MAX TEST PRESSURE

(mm)
50 140 200 315 300 600 700 1000

(mm)
65 160 200 300 300 600 700 1000

(mm) (mm)
60.3 140 200 315 353 651 760 1062 76.1 160 219 324 365 672 784 1084

(mm)
STEEL/STEEL uPVC/uPVC uPVC/STEEL uPVC/STEEL FC30/FC24 FC18/FC12 FC18/FC12 FC12/FC06

(mm)
100 100 100 100 120 140 140 160

(mm)
133 224 292 407 458 756 875 1177

(mm)
148 246 311 419 470 777 889 1199

(mm)
172 172 172 172 260 260 260 260

(mm)
102 x 6.4 102 x 7.2 102 x 8.7 102 x 8.7 178 x 8.7 178 x 8.7 178 x 11.1 178 x 11.1

(bar)
24 24 24 24 24 24 24 24

Where the pipe OD differs to a greater extent a profile plate is used

KLAMFLEX STEPPED COUPLIINGS


NOM BORE PIPE 1 NOM BORE PIPE 2 PIPE OD1 PIPE OD2 DESCRIPTION L MIN A1 A2 B D MAX TEST PRESSURE

(mm)
65 160 150 250 355 600 700 1100

(mm)
80 150 200 250 350 600 750 1100

(mm)
76.1 160 177 273 355 610 711 1118

(mm)
96 174 232 318 378 672 762 1188

(mm)
STEEL/FC uPVC/FC18 FC/FC STEEL/FC36 uPVC/DI STEEL/FC18 STEEL/DI FC/STEEL

(mm)
100 100 100 100 120 150 150 160

(mm)
148 246 270 367 460 714 815 1233

(mm)
170 266 324 410 483 776 877 1303

(mm)
188 190 190 190 270 270 270 276

(mm)
110 112 112 112 188 188 188 194

(bar)
24 24 24 24 24 24 24 24

FOR COUPLINGS OF 25 AND 40 BAR WORKING PRESSURE PLEASE CONTACT KLAMFLEX THE ABOVE TABLE INCLUDES SAMPLES OF THE SIZES AVAILABLE, PLEASE CONTACT KLAMFLEX FOR ANY OTHER SIZES UP TO 2000MM.

11

KLAMFLEX DEDICATED FLANGE ADAPTORS


KLAMFLEX Dedicated Flange Adaptors are manufactured to join plain-ended pipe to flanged valves, fittings and pipes, obviating difficulties usually experienced with rigid connections. KLAMFLEX Dedicated Flange Adaptors are supplied to suit the pressure rating of the flange. The overall pressure rating of the assembled adaptor will be equal to that of the lower rated component, either pipe of flange. Klamflex Restraint Flange Adaptors can also be supplied where end pull out is of concern. When ordering KLAMFLEX Dedicated Flange Adaptors the following information is required to avoid the possibility of error in flange selections: Pipe outside diameter. Nominal bore of the flanged fitting. Table drilling with standard applicable. The thickness of KLAMFLEX Flanges will not necessarily be the same as the mating flange. Flanges and flange adaptors will not be subject to the full end or side thrust, most of which is absorbed by the flexibility in the rubber gaskets. Refer to column T on pages 13-14. KLAMFLEX Flange Adaptors can be manufactured with full sleeves to prevent end pullout on PE, HDPE and GRP pipes.

12

KLAMFLEX FLANGE ADAPTORS : STEEL PIPES


FLANGES DRILLED PN10 OR PN16, 1000/3 OR 1600/3 (BS10: A,D,E) AND ANSI 125/ 150
NOM PIPE BORE OD TOLERANCE ON PIPE OD FOR DISTANCE L MINIMUM LENGTH PREPARED PIPE END L OD OF ENDRING FLANGE TABLE APPROX. ADAPTOR FLANGE MASS LENGTH THICKNESS B T

(mm) (mm)
50 65 80 100 125 150 150 200 250 250 300 350 400 450 500 600 700 800 900 1000 1200 1400 1600 1800 2000 2000 60.3 76.1 88.9 114.3 139.7 165.1 168.3 219.1 267 273 323.9 355.6 406.4 457 508 610 711 813 914 1016 1219 1420 1620 1820 2020 2032 +0.8 +0.8 +0.8 +0.8 +1.6 +1.6 +1.6 +1.6 +1.6 +1.6 +1.6 +1.6 +1.6 +1.6 +1.6 +1.6 +1.6 +1.6 +1.6 +1.6 +1.6 +1.6 +3 +3 +3 +3

(mm)
-0.8 -0.8 -0.8 -0.8 -0.8 -0.8 -0.8 -0.8 -0.8 -0.8 -0.8 -1.6 -1.6 -1.6 -1.6 -1.6 -1.6 -1.6 -1.6 -1.6 -1.6 -3 -3 -3 -3 -3

(mm)
100 100 100 100 100 100 100 100 100 100 100 150 150 150 150 150 150 150 150 150 150 150 150 150 150/ 300 150/ 300

(mm)
134 150 165 191 220 246 246 308 360 364 414 458 509 559 610 712 813 915 1016 1118 1335 1536 1736 1936 2134 2146

(mm)
152 102 102 102 104 106 106 106 109 109 109 153 154 154 155 155 155 155 155 157 165 175 190 190 190/ 290 190/ 290

(mm)
12 12 12 12 14 16 16 16 19 19 19 23 24 24 25 25 25 25 25 27 35 45 60 60 60 60

(kg)
3.1 3.4 3.9 4.5 6.5 7.5 7.5 10 15.5 14.6 17.3 33.5 39.6 45.5 55.6 70.6 71.6 84.4 90.1 118.6 198 275.9 439.1 494.1 TBA TBA

FOR COUPLINGS OF 25 AND 40 BAR WORKING PRESSURE PLEASE CONTACT KLAMFLEX

The above table includes samples of the sizes available, please contact KLAMFLEX for any other sizes up to 3500mm.

13

KLAMFLEX FLANGE ADAPTORS: DUCTILE IRON PIPES


FLANGES DRILLED PN10 OR PN16, 1000/3 OR 1600/3 (BS10: A,D,E) AND ANSI 125/ 150
NOM BORE PIPE OD TOLERANCE ON PIPE OD FOR DISTANCE L MINIMUM LENGTH PREPARED PIPE END L OD OF ENDRING FLANGE TABLE APPROX. ADAPTOR FLANGE MASS LENGTH THICKNESS B T

(mm) (mm)
100 150 200 250 300 350 400 450 500 600 700 800 900 1000 1200 1400 1600 1800 2000 118 170 222 274 326 378 429 480 532 635 738 842 945 1048 1255 1462 1668 1875 2082 +1.0 +1.0 +1.0 +1.0 +1.0 +1.0 +1.0 +1.0 +1.0 +1.0 +1.0 +1.0 +1.0 +1.0 +1.0 +1.0 +1.0 +1.0 +1.0

(mm)
-3.0 -3.0 -3.5 -3.5 -3.5 -3.5 -4.0 -4.0 -4.0 -4.5 -4.5 -4.5 -5.0 -5.0 -6.0 -6.0 -6.0 -6.0 -6.0

(mm)
100 100 100 100 100 150 150 150 150 150 150 150 150 150 150 150 150 150 150/300

(mm)
200 260 308 364 414 480 531 582 634 737 840 944 1047 1150 1371 1578 1784 1989 2196

(mm)
102 106 106 109 109 153 154 154 155 155 155 155 155 157 165 175 190 190 190/290

(mm)
12 16 16 19 19 23 24 24 25 25 25 25 25 27 35 45 60 60 60

(kg)
4.5 7.8 9.8 14.7 17.1 32 37.5 42.9 52.5 66.5 66.5 77.9 82.1 108.7 180.3 244.1 382.7 TBA TBA

FOR COUPLINGS OF 25 AND 40 BAR WORKING PRESSURE PLEASE CONTACT KLAMFLEX

The above table includes samples of the sizes available, please contact KLAMFLEX for any other sizes up to 3500mm.

KLAMFLEX STEPPED FLANGE ADAPTORS

KLAMFLEX RESTRAINT FLANGE ADAPTORS

KLAMFLEX Stepped Flange Adaptors can be manufactured where pipe nominal bore is larger (as indicated above) or smaller than flange nominal bore.

KLAMFLEX Restraint Flange adaptors can be manufactured where end pull out is of concern.

14

KLAMFLEX GRIPPER FLANGE ADAPTORS


Klamflex Gripper Flange Adaptors are designed to resist end pullout on PE and HDPE pipes, it is the fastening action of the Gripper Ring that secures the Flange Adaptor onto the pipe resisting end pullout. Klamflex Gripper Flange Adaptors are manufactured from Ductile Iron, Gasket material is EPDM, Gripper Ring material is Brass, and coating is Fusion Bonded Epoxy. Sizes are available for the following pipe outside diameters:

NOMINAL BORE (mm)

PIPE OD RANGE (mm)

APPROX MASS (kg)

FLANGE DRILLING

60mm 80mm 100mm 150mm 175mm 225mm 250mm 300mm

63mm 90mm 110mm 160mm 180mm 225mm 280mm 315mm

3.6 5.4 6.4 12.8 12.8 18 28.2 38

PN10/16 PN10/16 PN10/16 PN10/16 PN10/16 PN10/16 PN16 PN16

15

KLAMFLEX DISMANTLING JOINTS


Manufactured to AWWA C219 under quality management systems accredited to ISO 9001:2000, the KLAMFLEX Dismantling Joint assembly is a double flanged composite fitting featuring a telescopic action between a flanged spigot and a flange adaptor. The joint is designed to provide longitudinal adjustment in flanged pipe systems. Dismantling Joints provide a simple method for the installation and removal of flanged valves, pumps, flow meters, flanged pipes and pipe fittings. Tie rods are provided for final anchoring and location and these also double as mating flange jointing bolts, reducing the number of these required. The Dismantling Joint range from KLAMFLEX extends from 50mm to 2000mm and whilst the chart indicates flange ratings of PN10/16, all common drillings are available in pressures up to 40 BAR. The range indicated overleaf is typical and KLAMFLEX can manufacture to specific customer specifications and dimensions, on request. Thickness of Klamflex flanges will not necessarily be the same as the mating flange. Flanges and flange adaptors will not be subject to full end or side thrust, most of which is absorbed by the flexibility in the rubber gaskets. Pipe end should be smooth, with no seams, score marks, dents or ovality. Installation is extremely simple and is generally done with the flange adaptor end connected to the valve or other appurtenance. In cases where a full faced flange is required, for example on wafer butterfly valves, the joint is simply turned round to use the spigot flange instead.

16

SPIGOT PIECE DRILLING SPECIFICATION

VALVE OR FLANGED END

B
END RINGS TO BE SCALLOPED TO ACCOMODATE TIE RODS

VALVE OR FLANGED END

C H

NOMINAL BORE OF JOINT

FLANGE PN RATING

SPIGOT PIPE O.D. +/-

SPIGOT PIPE WALL THICK

B C H ADAPTOR & SPIGOT MIN SPIGOT LENGTH LENGTH FLANGE INCLUDING OF THICKNESS FLANGE JOINT

C+D H RECOM. MAX JOINT LENGTH LENGTH OF JOINT

TIE ROD QTY

A TIE ROD LENGTH

APPROX MASS

(mm)

(bar)

(mm)

(mm)

(mm)

(mm)

(mm)

(mm)

(mm)

(kg)

50 65 80 100 125 150 200 200 250 250 300 300 350 350 400 400 450 450 500 500 600 600 700 700 800 800 900 900 1000 1000 1200 1200 1400 1400 1600 1600 1800 1800 2000 2000

PN 10/16 PN 10/16 PN 10/16 PN 10/16 PN 10/16 PN 10/16 PN 10 PN 16 PN 10 PN 16 PN 10 PN 16 PN 10 PN 16 PN 10 PN 16 PN 10 PN 16 PN 10 PN 16 PN 10 PN 16 PN 10 PN 16 PN 10 PN 16 PN 10 PN 16 PN 10 PN 16 PN 10 PN 16 PN 10 PN 16 PN 10 PN 16 PN 10 PN 16 PN 10 PN 16

60 76 89 114 140 165 219 219 273 273 324 324 356 356 406 406 457 457 508 508 610 610 711 711 813 813 914 914 1016 1016 1219 1219 1420 1420 1620 1620 1820 1820 2020 2020

3.2 3.2 3.2 3.9 4.2 4.2 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 4.5 6.0 6.0 6.0 6.0 6.0 6.0 6.0 6.0 8.0 8.0 8.0 10.0 10.0 10.0 10.0 10.0 12.0 12.0

165 165 165 165 165 165 165 165 175 175 175 175 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 260 260 280 280 310 310 350 350 350 350 350 350

12 12 12 12 14 16 16 16 19 19 19 19 23 23 24 24 24 24 25 25 25 25 25 25 25 25 25 25 27 27 35 35 45 45 60 60 60 60 60 60

165 165 165 165 165 165 165 165 175 175 175 175 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 250 260 260 280 280 310 310 350 350 350 350 350 350

185 185 185 185 185 185 185 185 195 195 195 195 275 275 275 275 275 275 275 275 275 275 275 275 275 275 275 275 290 290 310 310 340 340 380 380 380 380 380 380

205 205 205 205 205 205 205 205 215 215 215 215 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 320 320 340 340 370 370 410 410 410 410 410 410

4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 6 7 7 7 7 8 8 9 9 8 8 11 11 12 12

M16 M16 M16 M16 M16 M20 M20 M20 M20 M24 M20 M24 M20 M24 M24 M27 M24 M27 M24 M30 M27 M33 M27 M33 M30 M36 M30 M36 M33 M39 M36 M45 M39 M45 M45 M52 M45 M52 M45 M56

X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X X

300 300 300 300 300 320 320 320 330 350 330 350 420 450 450 460 450 470 450 490 480 520 480 520 500 550 510 570 560 610 610 680 670 730 750 820 770 850 750 890

9 10 12 13 16 23 31 33 34 38 43 44 49 71 77 88 95 99 111 131 135 175 168 184 200 220 225 245 298 331 496 559 610 665 1250 1320 1300 1500 1490 1750

FOR COUPLINGS OF 25 & 40 BAR WORKING PRESSURE PLEASE CONTACT KLAMFLEX THE ABOVE TABLE INCLUDES SAMPLES OF THE SIZES AVAILABLE, PLEASE CONTACT KLAMFLEX FOR ANY OTHER SIZES.

17

KLAMFLEX SOCKET STEEL FITTINGS


Klamflex Socket Steel Fittings are available in all steel fittings such as Bends, Tees, Reducers, and Crosses, and are manufactured by welding half a Klamflex Coupling to the ends of a steel fitting. Bolts and nuts and not studs are used in the couplings, this ensures easy replacement of damaged fasteners. Klamflex also makes use of a profile plate and not lugs that are welded to the steel fitting to accommodate the tightening process. Installation is effected by simply inserting the plain ended pipe into the Klamflex Pipe Coupling and tightening the bolts. The use of these fittings will result in significant cost savings as only one piece of equipment is being purchased instead of separate fittings and couplings.

18

KLAMFLEX JUNIOR COUPLINGS


A small bore product range specifically designed for use on plain ended steel service lines, comprising of:
SIZE RANGE

Junior Straight Couplings Junior Straight Couplings with Integral gripper rings Male/Female Junior Couplings Male/Female Junior Couplings with integral gripper rings Junior Tee Pieces

15-50 mm 15-50 mm

15-50mm 15-50 mm

15-25 mm

Junior Tees with integral gripper rings 15-25 mm Junior Repair Clamps Junior Repair Clamp with Tee Outlet 15-50mm 15-25mm

All products feature cast construction & galvanised finish for long term corrosion protection. An extremely simple jointing method which eliminates the need for on site pipe threading.

19

PIPE OUTSIDE DIAMETERS OF COMMON PIPE MATERIALS


40 1.5 14 48.3 60.3 48.8 60.8 219.1 48.3 60.3 48.3 60.3 48.3 60.4 98.0 118.0 144.0 170.0 116 379 426 378 168 382 396 412 426 440 392 402 405 419 439 478 463 515 532 492 456 508 560 586 605 598 448 498 568 503 566 629 484 545 606 727 755 654 668 672 691 667 703 761 780 780 801 545 613.7 650 720.3 755 773.2 807 826 808 888 830 852 860 879.3 912 927 952 970 1000 1110 996 977 1024 1121 1172 1277 964 1068 1143 984.5 1090.2 1300.5 1214 1320 1430 1540 1650 468 524 583 699 450 506 560 672 436 174 180 188 196 177 259 288 259 268 295 356 286 345 344 86 232 69 55.9 69.1 55.9 69.1 82.3 95.5 121.9 149.9 177.3 204.7 232.2 259.1 286 333.8 378 96 122 177 240 106 126 178 234 232 286 334 262 318 378 250 304 365 239 295 353 229 284 340 222 274 328 488 543 651 760 784 816 430 483 744 535 638 507 587 667 850 868 896 932 956+ 1062 976 1084 1008 1120 1048 1165 69 96 122 150 177 232 286 345 168 220.5 272.1 327 413 464 515 617 719 821 222.0 274.0 326.0 378.0 429.0 480.0 532 635 738 842 76.1 88.9 114.3 139.7 168.3 193.7 219.1 244.5 273.0 323.9 355.6 406.4 457.0 508 559 610 660 711 762 813 864 73.0 88.9 114.3 141.3 168.3 219.1 273.1 323.9 355.6 406.4 457.2 508 559 609.6 660.4 711.2 76.1 88.9 114.3 139.7 168.3 219.1 273.0 323.9 355.6 406.4 457 508 610 711 813 273.1 323.9 355.6 406.4 457 508 559 610 660 711 762 813 864 76.6 89.5 114.9 140.6 166.1 914 1016 1067 1118 1219 1321 1422 914 1016 1067 1118 1219 914 1016 945 1048 924 1025 1219 1255 1229 1422 1422 1462 1433 1626 1829 2032 1626 1829 2032 1625.6 1828.8 2032 1626 1829 2032 1668 1875 2080 1637 1841 2045 76.1 88.9 114.3 139.7 165.1 2 2.5 3 4 5 6 7 8 9 10 12 16 18 20 22 24 26 28 30 32 34 36 40 42 44 48 50 65 80 100 125 150 175 200 225 250 300 350 400 450 500 550 600 650 700 750 800 850 900 1000 1050 1100 1200 1300 1400 1500 1600 1800 2000 52 56 64 72 80

ALL DIMENSIONS ARE IN MILLIMETRES (mm)

mm

15

20

25

32

PIPE NOMINAL BORE

inches

0.5

0.75

1.25

STEEL BS 1387

21.3 26.9 33.7 42.4

STEEL SABS 62 MEDIUM

max

21.7 27.2 34.2 42.9

STEEL SABS 719

STEEL ISO 4200 SER 1

21.3 26.9 33.7 42.4

STEEL API 5 L

21.4 26.7 33.4 42.4

762 812.8 863.6 914.4 1016 1066.8 1117.6 1219.2 1320.8 1422.4

STEEL BS 3600/3601

21.4 26.8 33.6 42.3

DUCTILE IRON ISO 2531 : BS 4772

GRP (O.D. Can Vary by Manufacturer)

max

ASBESTOS CEMENT C.O.D. (South Africa)

ASBESTOS CEMENT C.I.D. (South Africa)

CL6

ASBESTOS CEMENT C.I.D. (South Africa)

CL12

ASBESTOS CEMENT C.I.D. (South Africa)

CL18

ASBESTOS CEMENT C.I.D. (South Africa)

CL24

20
82.3 95.5 121.9 149.9 177.3 204.7 232.2 259.1 286 345.4 399.3 453.1 506.9 560.3

ASBESTOS CEMENT C.I.D. (South Africa)

CL30

ASBESTOS CEMENT C.I.D. (South Africa)

CL36

ASBESTOS CEMENT METRIC BS 486

CL15

ASBESTOS CEMENT METRIC BS 486

CL18

ASBESTOS CEMENT METRIC BS 486

CL20

ASBESTOS CEMENT METRIC BS 486

CL25

IMP CAST IRON ASBESTOS CEMENT

CL AB

IMP CAST IRON ASBESTOS CEMENT

CL CD

UPVC, MPVC, PE, HDP


32 40 50 63 75 90 110 125 140 160 180

THESE PIPES ARE QUOTED USING THE SAME DIMENSION FOR NOMINAL BORE AS PIPE OUTSIDE DIAMETER 200 225 250 280 315 355 400 450 500 560 630 710 800 900 1000 1200 1400 1600 1800 2000

16

20

25

TO ASSIST US IN MAKING THE CORRECT PRODUCT SELECTION FOR YOU PLEASE PROVIDE AS MUCH OF THE FOLLOWING INFORMATION AS POSSIBLE
(I) PIPE OUTSIDE DIAMETER OR PIPE MATERIAL AND CLASS (II) WORKING PRESSURE (III) MATCHING FLANGE DRILLING FOR FLANGE ADAPTORS AND DISMANTLING JOINTS (IV) PRODUCT IN SYSTEM (WATER, SEWAGE, CHEMICALS, GAS, AIR, OIL ETC) (V) FLUID / GAS TEMPERATURE IF AVAILABLE

ARPAL

P.O. Box 4073 Luipaardsvlei 1743 South Africa

Tel: +27 11 762 5326 Fax: +27 11 762 5674 E-mail: sales@klamflex.com Website: www.klamflex.com

52 Fransen Street Chamdor Krugersdorp 1740

PIPE COUPLINGS (PTY) LTD

KLAMFLEX PIPE COUPLINGS (PTY) LTD RESERVES THE RIGHT TO MODIFY THE SPECIFICATIONS AND INFORMATION CONTAINED WITHIN THIS MANUAL DUE TO PRODUCT RESEARCH, DEVELOPMENT AND IMPROVEMENTS

You might also like