<a>

HE

AN ISO 9001 COMPANY

EARTHING & LIGHTNING

PROTECTION SYSTEMS

History in Engineering eXcellence

LIST OF TEST REPORTS & CERTIFICATIONS

EARTHING & LIGHTNING PROTECTION SYSTEM COMPONENTS

S. NO PRODUCT SIZE STANDARD / TEST CERTIFYING BODY

1 | GROUNDING & BONDING EQUIPMENT-| AS PER UL CERTIFICATE NO. UL 467 & CAN/CSA
€22.2 NO. 41 UL
GROUNDING RODS 20140603-E328910
2 | GROUNDING & BONDING EQUIPMENT-| AS PER UL CERTIFICATE NO. UL 467 & CAN/CSA
€22.2 NO. 41 UL
GROUNDING CLAMPS 20130927-E328910

3 SOLID COPPER EARTH ROD 16.0 mm DIA. X 1.2 MTRS. LENGTH BS EN 62561-2 SIRIM, QAS
INTERNATIONAL, MALAYSIA
4 14.2 mm DIA. X 2 MTRS. LENGTH

IEC 62561-2 SHREE RAM TESTING LABORATORIES, INDIA

5 17.2 mm DIA. X 3 MTRS. LENGTH
6 14.2 mm DIA. X 2 MTRS. LENGTH
7 250 MICRONS COPPER BONDED 17.2 mm DIA. X 3 MTRS. LENGTH
8 EARTH ROD 25.0 mm DIA. X 3 MTRS. LENGTH | SHORT CIRCUIT WITHSTAND TEST CPRI,
INDIA
9 32.0 mm DIA. X 3 MTRS. LENGTH
10 17.2 mm DIA. X 4 MTRS. LENGTH
11 17.0 mm DIA. COPPER PLATING THICKNESS | TCR ENGINEERING SERVICES PVT. LTD, INDIA

1) CHEMICAL ANALYSIS
12 STAINLESS STEEL EARTH ROD 19.0 mm DIA. 2) ELECTRICAL RESISTIVITY TEST CPRI,
INDIA
3) TENSILE STRENGTH TEST
13 | PIPE - IN - PIPE EARTHING ELECTRODE,| 76.0 mm DIA. X 3 MTRS LENGTH,
14 100 MICRONS HDG 50.0 mm DIA. X 3 MTRS LENGTH SHORT CIRCUIT WITHSTAND TEST CPRI,
INDIA
15 | PIPE - IN - PIPE EARTHING ELECTRODE,| 76.0 mm DIA. X 3 MTRS LENGTH
250 MICRONS COPPER BONDED
16 R.0.H.S. DIRECTIVE 2011/65/EU | TCR ENGINEERING SERVICES PVT. LTD, INDIA
GROUND ENHANCING CHEMICAL NA REQUIREMENTS
COMPOUND - TERRAHEX
17 IEC 62561-7 / EN 12457-2 SPECTRO ANALYTICAL LABS LTD, INDIA
18 POLYMER SQUARE EARTH PIT 308 mm X 308 mm X 214 mm
CHAMBER - HEP
19 POLYMER ROUND EARTH PIT 260 mm X 355 mm X 260 mm LOAD BEARING CAPACITY TCR
ENGINEERING SERVICES PVT. LTD, INDIA
CHAMBER - HEPR-A (IEC 62561-5)
20 CONCRETE SQUARE EARTH PIT 310 mm X 310 mm X 170 mm
CHAMBER - HCEP

69
COPPER BONDED GROUNDING RODS LISTED

HEX copper bonded earth rods are made from low Carbon Steel as per IS 2062
standard with high tensile strength material. Low carbon steel rods are
molecularly bonded with 99.9% pure electrolytic copper.

Our 250 microns copper bonded earth rods of 14.2 mm dia. & 17.2 mm dia. are
compliant as per IEC 62561 -2.

Salient Features :

e Perfectly bonded rod will last longer, drive easier and will not crack.

e Corrosion resistant while providing the lowest resistance to ground.

e Threads are formed by roll threading process, which ensure that an even
copper coating is maintained, even at the root of the thread. Roll threads give
greater strength than cut threads.

e Roll threading process raises the surface of the rod, so that thread diameter is
greater than shank diameter.

Shank | Length | Copper Thk. | Product

Diameter IIc Code
12.7 mm 1830 250 HBR - 183D
127mm 8 2440 10 254 24 HBR-244 *
127mm 10 3050 10 254 / 3.0 HBR-305E *
127mm 8 2440 10 254 1/2" 24 HBR-244D «
127mm 10 3050 10 254 1/2" 3.0 HBR-305D *
142mm 4 1220 10 250 / 15 HBR-122
142mm 5 1530 10 250 / 18 HBR-153
142mm 6 1830 10 250 / 22 HBR-183
142mm 8 2440 10 254 5/8" 3.0 HBR-244A *
142mm 10 3050 10 254 5/8" 37 HBR-305 *
142mm 4 1220 10 250 5/8" 15 HBR-122A
142mm 5 1530 10 250 5/8" 1.8 HBR-153A
142mm 6 1830 10 250 5/8" 22 HBR-183A
142mm 8 2440 10 254 +%/ 3.0 HBR-244E *

142mm 10 3050 10 254 / 3.7 HBR-305A *

172mm 5 1580 10 250 / 2.7 HBR-153B
172mm 6 1830 10 250 / 3.3 HBR - 183B

72mm 8 2440 10 254 44 HBR-244B *

17.2mm 10 3050 10 254 / 5.5 HBR-305B *
172mm 5 1530 10 250 3/4" 27 HBR-153C
17.2mm 6 1880 10 250 3/4" 3.3 HBR-183C
17.2mm 8 2440 10 254 3/4" 44 HBR-244C *
172mm 10 3050 10 254 3/4" 5.5 HBR-305C «
250mm 10 3050 10 254 / 12.0 HBR - 2530
320mm 10 3050 10 254 / 19.6 HBR - 3230

Copper bonded grounding rods are also available with Internal Threading on order.
Please refer solid copper grounding rod section for dimensional details.

* These are UL listed Grounding / Earthing Rods. As per

UL 467 Standard, the Copper Bonding on UL listed Grounding / Earthing
Rods will be min. 254 microns.

GROUNDING ROD CLAMPS LISTED

FOR DIRECT BURIAL

WITH STAINLESS STEEL SCREW

Size of Product Code

Earthing Rod/Pipe

Bronze 1/2" HGC - 411

Bronze 5/8" HGC - 412

Bronze 3/4" HGC - 413

70

AN ISO 9001 COMPANY

COPPER BONDED GROUNDING ROD

HEX copper bonded earth rods are made from high tensile, low carbon steel as per

IS 2062. These rods are molecularly bonded with 99.9% pure electrolytic copper.

Salient Features :
e Perfectly bonded rod will last longer, drive easier and will not crack.
e Corrosion resistant while providing the lowest resistance to ground.

e Threads are formed by roll threading process, which ensure that an even
copper coating is maintained, even at the root of the thread. Roll threads give

greater strength than cut threads.

e Rollthreading process raises the surface of the rod, so that thread diameter (1).

is greater than shank diameter (S).

® Copper Bonding Thickness - 25 Microns.

Dimensions Shank Dia. | Thread Dia.| Product

Rod Size (Dia. X Length) | 'S'inmm | 'T'inmm Code

9.5 X 1200 HBR - 012

9.5 x 1800 9.5 HBR - 018
14x 1200 12 14 HBR - 1412
14x 1500 12 14 HBR - 1415
14 x 1800 12 14 HBR - 1418
14 x 2000 12 14 HBR - 1420
14x 2400 12 14 HBR - 1424
5/8" x 4' or 16 mm x 1200 14.2 5/8" HBR - 112
5/8" x 5' or 16 mm x 1500 14.2 5/8" HBR - 115
5/8" x 6 or 16 mm x 1800 14.2 5/8" HBR - 118
5/8" x 8' or 16 mm x 2400 14.2 5/8" HBR - 124
5/8" x 10' or 16 mm x 3000 14.2 5/8" HBR - 130
5/8" x 4' or 16 mm x 1200 16 5/8" HBR - 312
5/8" x 5' or 16 mm x 1500 16 5/8" HBR - 315
5/8" x 6' or 16 mm x 1800 16 5/8" HBR - 318
3/4" x 4' or 19 mm x 1200 17.2 3/4" HBR - 212
3/4" x 5' or 19 mm x 1500 17.2 3/4" HBR - 215
3/4" x 6' or 19 mm x 1800 17.2 3/4" HBR - 218
3/4" x 8' or 19 mm x 2400 17.2 3/4" HBR - 224
3/4" x 10' or 19 mm x 3000 17.2 3/4" HBR - 230

e Copper Bonding thickness available above 25 Microns on request.

Prod. Code of such item will be addition of Microns in Bracket.

Ex. ‘HBR-215 (250)’ means HBR-215 with Copper Bonding thickness of 250 Microns.

e HEXalso offers other sizes as per customer specification.

GROUNDING ROD/AGGESSORIES - THREADED RODS

COUPLER

Material : Copper Alloy Pui Code| Product Code| Product Code

Couplers are counter Al. Bronze | Gunmetal

bored to completely = 14 HEC-15 HEC-15G

enclose the threads & 1
protect from damage 16 or 5/ HEC-16 HEC-17 HEC-17G
and corrosion. 190r3/4" HEC-19 - HEC-20 -- HEC- 206
DRIVING STUD

Material : High Tensile Steel

These are used to drive the

| size___—Product Code

grounding Rod into the Ground. im absent

5/8" or 16 mm HDS - 16
3/4" or 19 mm HDS - 19
1/2" HDS - 12

ALLENKEY Type hardened Driving Stud available on request.

71

+ _ Rod Dia. ‘S’

+ Thread Dia. ‘T’

AN ISO 9001 COMPANY

Driving ——»
Head SI
Rod Driving Head

Coupling

Dowel

Coupling Dowel

Tip Driving Tip

Driving ——»

<——_ Thread Size 'T'

AN ISO 9001 COMPANY

SOLID COPPER GROUNDING ROD({ U

INTERNALLY THREADED

¥L J LISTED

HEX solid Copper earth rods are made from 99.9% pure electrolytic copper.
Solid Copper rods offers greater resistance to corrosion. They are ideally used

in applications where soil conditions are very aggressive, for eg. soil with high

salt content.
Rota) gh
15 1200 mmor4' HSC - 512
15 1500 mmor5' HSC - 515
20 1200 mm or 4' HSC - 520
20 1500 mmor5' HSC - 521
20 2540 mm Or 10’ HSC - 1021 *

* These are UL listed Grounding / Earthing Rods as per UL 467 Standard.

SOLID COPPER GROUNDING ROD - ACCESSORIES

| Size | item | Product Code

15mm
20 mm
15mm
20 mm
15mm
20 mm

Driving Head
Driving Head
Coupling Dowel
Coupling Dowel
Driving Tip
Driving Tip

HDH - 15
HDH - 20
HCH - 15
HCH - 20
HDT - 15
HDT - 20

SOLID COPPER GROUNDING ROD

EXTERNALLY THREADED

Thread Size | Length Product

'T'inmm inmm Code

14
14
5/8"
5/8"
3/4"
3/4"

1200
1500
1200
1500
1200
1500

HBRS - 1412
HBRS - 1415
HBRS - 112
HBRS - 115
HBRS - 212
HBRS - 215

¢ Same accessories of copper bonded grounding rods are applicable.

© HEXalso offers other sizes as per customer specification.

72
MECHANICALLY COPPER CLADDED GROUNDING RODS

Mechanically copper cladded grounding rods are made when an electrolytic grade
copper tube of
0.25 mm (250 microns) wall thickness is fitted by pressure & heat over a high
tensile, low carbon

steel rod to form a metallurgical bond.

Rod Size "S$" Product Code

These rods can be supplied with threading & also can be made as per customer
specification.

STAINLESS STEEL GROUNDING RODS UL LISTED

1200 (4 ft) HCR - 1412

1800 (6 ft) HCR - 1418
2400 (8 ft) HCR - 1424
1200 (4 ft) HCR - 112
1800 (6 ft) HCR - 118
2400 (8 ft) HCR - 124
1200 (4 ff) HCR - 312
1800 (6 fi) HCR - 318
2400 (8 ft) HCR - 324
3000 (10 ff) HCR - 330
1200 (4 fi) HCR - 412
1800 (6 ft) HCR - 418
2400 (8 ft) HCR - 424
3000 (10 ft) HCR - 430

HEX stainless steel ground rods are used to overcome many of the problems caused by
galvanic
corrosion which can take place between dissimilar metals buried in close proximity.
Other
advantages of Siainless Steel rods are that they are highly resistant to corrosion
and are much
more anodic than copper reds.

Diameter
Inches
5/8" 14.2
5/8" 14.2
5/8" 14.2
3/4" 17.2
3/4" 17.2
1.0" 23.1

* These are UL listed Grounding / Earthing Rods as per UL Standard.

GROUNDING ROD ACCESSORIES - UNTHREADED RODS

Length
1.52
8 2.44
10' 93.05
5' 1.52
10' 3.05
10' 93.05
10
10
10
5
5
1

Weight Product
(kgs) Code

2.05
3.28
4.10
2.75
5.50
10.23

HSS - 145
HSS - 148
HSS - 1410
HSS - 175
HSS - 1710
HSS - 2410

Couplers

These couplers are used to drive & couple the unthreaded Rods deep and ensure
continuous contact for Earthing.

Material : Copper Alloy

Product Code : HERG

Specify the rod diameter to be used with.

Driving Heads
These are used to drive the unthreaded grounding rods in the ground.

Material : High Tensile Steel

Product Code : HDSU

P. S.: Specify Rod diameter to be used with.

ask

AN ISO 9001 COMPANY

POLYMER EARTH PIT CHAMBERS

The HEX range of square & round Polymer Earth Pit Housing Chambers are manufactured
from customized high density polymers for
superior strength & absorbing high stress levels. This in turn enhances the Load
Bearing capacity (LBC) as given below. They are stabilized
against degradation & damage from all weather conditions and are available in a
vast range of sizes & various colours.

Being comparatively light weight, this allows for ease of handling, storage &
transportation. Most of the lids or covers come with some form
of locking arrangement thus providing an inbuilt safety feature to the earth pit.

They have been tested successfully for compliance as per the IEC 62561-7 standard.

SQUARE POLYMER EARTH PIT CHAMBERS

PRODUCT DESCRIPTION PRODUCT OUTSIDE DIMS. IN MM NET LOAD BEARING

CODE LENGTH WIDTH HEIGHT _—KGS/PC. CAPACITY IN TONS

HEP 308.00 308.00 214.00 —«-2.50 5.00
POLYMER BASE WITH HEP-S 245.00 245.00 195.00 —«1.00 3.00
POLYMER COVER HEP-A 500.00 500.00 200.00 4.00 3.00
HEP-B 500.00 500.00 315.00 5.00 3.00
POLE EELS MM HEP-M 308.00 308.00 214.00 5.00 5.00

METAL COVER

HEP HEP-S HEP-A HEP-B HEP-M

ROUND POLYMER EARTH PIT CHAMBERS

PRODUCT DESCRIPTION PRODUCT OUTSIDE DIMS. IN MM NET LOAD BEARING

CODE TOP DIA. BOT. DIA. HEIGHT KGS/PC. CAPACITY IN TONS
POLYMER BASE WITH HEPR 154.00 213.00 230.00 0.75 5.00
POLYMER COVER HEPR-A 260.00 355.00 260.00 2.00 5.00

HEPR HEPR-A

74

AN ISO 9001 COMPANY

CONCRETE EARTH PIT CHAMBERS

HEX offers a unique range of square & round Concrete Earth Pit Housing Chambers.
These ready-to-use, robust chambers offer an easy
replacement to the tedious brick & cement chambers that are constructed on-site.
They are manufactured with a proprietary mortar
formulation using prime materials along with advanced additives for inducing light
weight properties. They also offer water resistance (low
porosity) & high insulation properties, long life & stability under all weather
conditions.

These chambers come in many sizes suitable for every application in the industry &
the Load Bearing Capacity (LBC) of our vast range is
given below. An Earth Bar for multiple connections can be fitted diagonally across,
in the slots provided.

They have been tested successfully for compliance as per the IEC 62561-7 standard.

SQUARE CONCRETE EARTH PIT CHAMBERS

PRODUCT DESCRIPTION | PRODUCT OUTSIDE DIMS. IN MM NET LOAD BEARING

CODE LENGTH WIDTH HEIGHT _—KGS/PC. CAPACITY IN TONS
HCEP 310.00 310.00 170.00 25,00 5.00
CONCRETE BASE WITH §HCEP-A 320.00 += 320.00 195.00 30,00 5.00
CONCRETE COVER HCEP-B 500.00 500.00 400.00 120.00 5.00
HCEP-C 510.00 510.00 400.00 130.00 5.00
HCEP-D 500.00 —-500.00 250,00 100,00 5.00
CONCRETE BASE WITH = icEP-M —«--310.00 ~—=S=— 310.00 170.00 25.00 5.00
METAL COVER
fa" “yee ayes >a
y f =< ‘ ] oo @ oo» o j )
aL 4 /
f i f , ‘G i
HCEP HCEP-B HCEP-C HCEP-D HCEP-M
ROUND CONCRETE EARTH PIT CHAMBERS
PRODUCT DESCRIPTION PRODUCT OUTSIDE DIMS. IN MM NET LOAD BEARING
CODE TOPDIA. BOTDIA. HEIGHT _KGS/PC. CAPACITY IN TONS
CONCRETE BASE WITH = icepR-cl_ «450.00 —=—- 430.00 300.00 70.00 3.00
METAL COVER

HCEPR-CI

s HEX

AN ISO 9001 COMPANY

HEX GROUND ENHANCING CHEMICAL COMPOUNDS

Soil characteristics are a primary factor to determine the resistance value of the
grounding system. Clause 14.5 of IEEE 80:2013 states the
following. “It is often impossible to achieve the desired reduction in ground
resistance by adding more grid conductors or ground rods. An
alternate solution is to effectively increase the diameter of the electrode by
modifying the soil surrounding the electrode.”

HEX offers a vast range of Ground Enhancing Chemical Compounds precisely as a

solution to this effect. Each of these Compounds are
engineered to lower the resistivity of the surrounding soil to a certain
percentage. They are suitable for various soil conditions & geology.
Though primarily they can be used individually, they can also be used as a blend
with each other to enhance their performance. Give us
the soil resistivity of the site, the details of the equipment that needs grounding
& HEX will offer you the optimum blend suitable to achieve
the desired resistance value of the earthing system.

Some of the special features of these compounds are:

e Highly conductive thus ensuring quick dissipation of fault currents.

e Have been tested successfully for compliance as per IEC 62561-7.

e RoHScompliant & therefore absolutely Eco friendly as they do not pollute the
surrounding soil where they are used.

e Compatible with all types of earthing electrodes & their non-corrosive property
increases the life of the earthing system.
e Perform in all weather conditions hence maintaining stable resistance values.

e Longshelflife, can be stored for along period without deterioration.

These are the compounds & some of their properties:

PARAMETERS NAME OF COMPOUND

| TEREC+ | EARTHCON | TERRAPRO | TERRAHEX | TERRANITE |
v v

CARBON v Vv x
BENTONITE x Vv x Vv Vv
DISPERSION v v Vv x Vv
CHEMICAL DIFFUSSION Vv Vv Vv x Vv
COMPOSITION IONISATION VA Vv V4 VA v
EXPANSION VA Vv VA Vv v
HYGROSCOPIC Vv VA x v Vv
OTHER PATENTED V4 x x x x
BAG PACKING (KGS) 5.00 12.50 25.00 25.00 25.00
pH VALUE 7708 7.51085 9T0 10 7.5 T0 8.5 8.510 9.5
OTHER DETAILS SELF RESISTIVITY (OHM- MTR) 0.2 0.098 0.18 0.80 0.91
APPROX. REDUCTION IN SOIL
RESISTIVITY / BAG / METER (%) % 65 60 55 50
TYPE OF SOIL SUITABLE FOR ALL MOST MOST MOST NORMAL

HEX

‘Taoan coment
TERRAPRO

moUMD ENMANCING MATERIAL

Woight
5K Las

leaag

SRARY COPPER & ALLOY (1) LTD.

EM i ws a Hl ee ws ot

a al
Manulactured by
‘eee: & ALLOY (i) L7®-
Eee —

76

AN ISO 9001 COMPANY

EARTH ROD SEALS

HEX Earth Rod Seals are uniquely designed to prevent the ingress of ground
water into the Earth Pit Chamber. Coupled with our HEP Polymer Earth Pit
Chamber, these seal kits are highly suitable for use in areas where the water
table is very high & when earth pits have to be installed during construction
through concrete foundations/basements. The single or double flanges serve
to reduce the water pressure exerted on the Earth Pit Chamber.

HESS

In concrete foundation/basement earthing the bottom flange is fitted on the rane}

damp proof membrane. The copper bonded earth rod is passed through a

PVC pipe which is fitted in between the top & bottom flanges as per the length

specified by the customer. Both the ends of the earth rod are made HESD
waterproof by special seal kits. These seal kits are made specifically to suit
(Double
the diameter of the earth rod. Flange)

HEX Earth Rod Seal Kits have been tested successfully for compliance as per
the IEC 62561-5 standard.

Product Code: HESS (Single Flange) (Weight : 2kgs)

HESD (Double Flange) (Weight : 3kgs)

P.S. : Please specify Earth Rod diameter to be used with.

EARTH ROD SEALS & EARTH PIT CHAMBER INSTALLATION DIAGRAM

EARTH ROD
PART 6 WYLON BSH 3 —y F EARTH BAR
CH ff | H “= FLORING ~ TILES.
| U CONCRETE
SEO OH JO kOe cp part a
. CAP FOR LOCKING
: (LocKNvTD
EARTHING COMPOUND: Poet hey ope PARA ants
WASHER
PART 6 NYLON BUSH f—-—
PART 7 NYLON BUSH 2: EARTH ROO SEAL
Sot
PART 2

—PART 5.
EARTHING COMPOUNDING

EARTH BARS FOR EARTH PITS

These earth bars fit into the slots provided in the earth pits housings and are
used
when multiple connections to the grounding rod are required.

Material : Copper

No. of mes Product

Holes nar Code
5 HEBC 05
7 2 290 30 HEBC 07

P.S. : Other hole sizes / extra holes available on request.

AN ISO 9001 COMPANY

AN ISO 9001 COMPANY

sat 3

ESE BASED LIGHTNING PROTECTION AIR TERMINAL

Satelit 3 £7
(SGI is an authorised distributor only for Indian Sub-continent & Middle East
Countries.)

The Early Streamer Emission Lightning Conductor Including

Teletesting supervision

This third generation of the Duval Messien “Satelit” range uses this technology to
force the lighting strike to follow a predetermined path towards the earthing
system. The Satelit 3 concept consists of polarising the lightning conductor tip
with a voltage of between 35 kV and 45kV, synchronised with the progress of the
descending tracer, and of triggering an anticipated start for the ascending tracer.
With its Satelit 3, Duval Messien is offering a ground-breaking development by
introducing a remote system testing facility: the TELETESTER-S3. Satelit 3 has
been designed inside a 304L grade Stainless Steel shell in order to guarantee high
resistance to impact, corrosion and chemical agents. The electronic components
selected for the Satelit 3 are completely protected inside an inert resin block.
The
spark gap is designed to conduct currents greater than 180 kA. Satelit 3 is
powered by a Ni-MH type battery, continuously recharged by indestructible,
flexible solar cells.

CERTIFICATIONS
The Bazet Test Center (COFRAC approved) under Lloyd’s Register control (the
certified European body).

faran di

e Taran is a 2nd generation ESE type of ‘active’ lightning conductor that provides
zonal protection in accordance with the French Standard NFC 17-102.

Itis a sturdy robust device made of 316L Stainless Steel.

Itis highly resistant against impact, corrosion and chemical agents.

Maintenance free, compact and easy to install.

Needs no external power source.

Warranty for 2 years on manufacturing defects.

Analog or Digital Lightning Strike GCounter’s are available on request.

CERTIFICATIONS

e ICMET - Romania. e CITEL- France.

e CPRI- India. e TUV Rheinland - India.

Weight: 2.4 kg

Radius of Protection :

LA MODEL TIP HEIGHT OF ESEAT (IN METERS) LA MODEL

2 4 5 7 #10 #15 #20 30
“LL PANS OF RTECTONNMETERS)|
SATELIT3-25 17 34 42 43 44 45 45 45 -
SATELIT3-45 25 51 63 64 64 65 65 65 -
SATELIT3-60 32 64 79 79 79 80 80 80 TARAN-60
FL NEL2 AOUS OF OTETION NETS
SATELIT3-25 20 40 49 50 51 53 54 55 -
SATELIT3-45 30 60 71 71 72 73 74 75 -
SATELIT3-60 34 68 86 87 88 89 89 90 TARAN-60
ELS MOUS OFAUTECTON NEES)
SATELIT3-25 23 46 57 59 61 63 65 68
SATELIT3-45 34 64 81 82 83 85 86 89 .
SATELIT3-60 40 78 97 98 99 101 102 104 TARAN-60
NEL HOUS OF PESTON ONMETERS|
SATELIT3-25 26 52 65 66 69 72 75 80
SATELIT3-45 36 72 89 91 92 95 97 101 -
SATELIT3-60 44 87 107 108 109 111 113 116 TARAN-60

78
ELPS ACCESSORIES

COPPER ALLOY CLAMPS

These clamps are made from a Copper alloy body which gives
strong resistance to corrosion. HEX offers following range of
clamps :-

Clamp - Atype
Suitable for Rod dia. 12 mm

Material : Brass with MS fastener

PROD. CODE: HAC - 1

ROD TO TAPE CLAMP - B TYPE

Product Code

5/8" 26 x 12 HBC - 1
5/8" 40x 12 HBC - 2
5/8" 51x12 HBC - 3

Also available in Gunmetal.

Please add G to Prod. Code (Ex. HBC-1 G for HBC-1)

ROD TO CABLE CLAMP - C TYPE

Cable Size | Product Code

3/8" or 9.5mm 35mm HCC - 1

5/8' or 16mm 50mm? HCC - 2
5/8" or 16mm 70mm HCC -3
3/4" or 20mm 95mm? HCC - 4

Also available in Gunmetal.

Please add G to Prod. Code (Ex. HCC-1 G for HCC-1)

ROD TO CABLE LUG CLAMP - D TYPE

Product Code

3/8" or 9.5mm HDC - 1

5/8' or 16mm HDC - 2

3/4" or 20mm HDC - 4
BRASS CABLE CLIP

Used for connecting 13mm rod to a cable range from 6 - 16 mm?

PROD. CODE : HBCC - 1

79

AN ISO 9001 COMPANY

AN ISO 9001 COMPANY

ELPS ACCESSORIES

U BOLT - ROD CLAMP

These are made from Copper with Gunmetal plate.

They can be supplied for all rods from 5/8" to 1" and Copper Tape

Hole Centres | Product Code

5/8" 37 mm HUU - 16
3/4" 37 mm HUU - 20
1" 37 mm HUU - 25

DOUBLE PLATE "U" BOLT CLAMP

Used to connect flat tapes in a vertical position on the rod.
Material : Gunmetal Plate with M10 threaded 'U' Bolt.

tee) Product
Code
mm
HUDP 216
HUDP 225
31 25 HUDP 231
38 HUDP 238
50 HUDP 250

U BOLT - ROD TO CABLE CLAMP

These are used for connecting Rods to Cables.

Available with different Rod & Cable size.

Material : Gunmetal Plates with 'U' Bolt

Nominal Rod Diameter Conductor Range mm” Product Code

5/8" 16mm 16 - 95 HURC - 1

3/4" 20 mm 16-70 HURC - 2
5/8" 16mm 70 - 185 HURC - 3
3/4" 20 mm 70 - 150 HURC - 4
5/8" 16mm 150 - 300 HURC - 5
3/4" 20 mm 150 - 300 HURC - 6
COMB CLAMPS
| MaxCond. | Product Code 1 bolt brass comb clamp for
round conductors with
6-8 HGP - 1 galvanised steel screws
9-12 HCP - 2 in accordance with IEC
Standards

| Max Cond. | Product Code 2 bolts brass comb clamp for

round conductors with

6-8 HCP - 3 galvanised steel screws

9-12 HCP - 4 in accordance with IEC
Standards
80
ELPS ACCESSORIES

TOWER BOND CLAMP

Mil - Gunmetal
These are suitable for bonding copper cable or wire to steel structures.

| Cond. Size mm” _| Channel Product Code

16 70 10

Mi0 HTB - 16
70 120 10 M12 HTB - 70
25 50 10 M10 HTB - 25
25 50 10 M10 HTB - 25A
BONDS
TOWER BOND CLAMP
Mtl - Gunmetal

These are used for bonding tape to steel structures.

Max. Tape Bolt Product Code

26 M10 HB - 26C (For Copper Conductor)
26 M10 HB - 26A (For Aluminium Conductor)

RAIN WATER PIPE BONDS - A

Mtl - Gunmetal

These are suitable for bonding solid tape to Rain Water Pipes, Handrails etc.

Max. Tape Bolt Product Code

26 M10 HRW - 26C (For Copper Conductor)
26 M10 HRW - 26A (For Aluminium Conductor)

RAIN WATER PIPE BONDS - B

Mil - Gunmetal

These are suitable for bonding with earthing conductor.

And to be used with separate copper earth strip.

These are used for bonding the round objects (pipes/rails), ducts etc.

Conductor Pipe Conductor | Product

diameter diameter Material Code

8mm 50-200mm Copper HBN175

81

AN ISO 9001 COMPANY

Lor mm-13 mm, 127mm Deep-2 Holes

Drwg. A: HCCP - 2120

8255 mm 762mm

!
44.45 mm
oe %
Sp 8255
in] |mm
1). ra
fi NI
Lxzrmm- 13 mm, 127mm Deep -4 Holes

wae

Drwg. B: HCCP - 4120 / HCCP - 4240

—
G

635mm.
31.75mm.
pslzgmm
aa) Pi"
mm

Gi i

9.525mm - 16mm Deep - 4 Holes

—,
=
D
ry.
)

@D—O.

Drwg. C: HCCPL - 4240

HEBB 04

HEBB O04/1

AN ISO 9001 COMPANY

ELPS ACCESSORIES

WATERMAIN BOND

Mil - Gunmetal
These are used for bonding copper tape to Watermain pipes.

Max. Tape Width mm Conductor Material Product Code

26 Copper HWMB - 26C

26 Aluminium HWMB - 26A
FLEXIBLE BRAID BOND
Mtl - Copper

Copper Flexible aes are used for bonding gates, doors, fences etc.

Hole Product Code

section a area Centre mm

25X3.5 35 mm? HFB - 252

25x 3.5 35 mm’ 11 400 HFB - 254

CAST GROUND PLATE OR EARTH PLATE

These Plates when used in concrete structures offer convenient ground

system connection points. They are used where reinforcing bars are
electrically continuous & are to be used as down conductors. These earth

points allow easy access for the lightning protection & earthing system.

2 Hole HCCP - 2120

B 120 4 Hole HCGP - 4120
B 240 4 Hole HCCP - 4240
Cc 240 4 Hole HCCPL - 4240
EARTH BLOCKS

HEX Earth Blocks are used for Termination of earth Conductors or

live conductors.

roduct
ee
4-Way Single 54 HEBB 004/1
4-Way Double 51 19 12 HEBB 004

8 -Way Double 88 19 12 HEBB 008

Material : Brass
Finish : Nickel Plated

Tin Plated available on request.

82
ELPS ACCESSORIES

AERIAL ELEVATION ROD

Mil : Electrolytic Copper

Air Rod can be installed with or without Multiple Point.

Rod Thread Length of Product Code

Diameter Diameter Rod
15 500

5/8" HAE - 15
15 5/8" 1000 HAE - 40
15 5/8" 2000 HAE - 120

PS. Other sizes available on request.

MULTI-PURPOSE AIR ROD SADDLES

These saddles can be installed horizontally on roofs or vertically on walls

and are used in conjuction with the air rods.

The saddles are suitable for use with 8mm diameter solid circular conductor
as well as 25 x 3mm flat tape.

Material : gunmetal / Aluminum

Application Product

with Code
Copper Air Rods HUAG - 253
Al. Air Rods HUAA - 253

PS. Specify Grounding Rod size to be used with.

MULTIPLE POINT

Material : Copper / Copper Alloy

Multiple Point is used with Elevation rod.

Rod Product Code

Diameter

16 - 5/8" HMP - 16
20 - 3/4" HMP - 20

TERMINAL BASE

Material : Brass (Copper Plated)

Used for fixing Aerial Rod and Down Conductor.

Four fixing holes are provided on it.

PRODUCT
CODE
M16 or 5/8" HTB - LP - 16

M20 or 3/4" HTB - LP - 20

Also available in Gunmetal.
Please add G to Prod. Code (Ex. HTB - LP - 16G)

83

Lock Nut

AN ISO 9001 COMPANY

AN ISO 9001 COMPANY

ELPS ACCESSORIES

RIDGE SADDLE PROD. CODE : HRDS - 1

Mtl - Gunmetal / Brass

Used for supporting Lightning Conductor Air Terminals on Ridges.

AERIAL ROD + TERMINAL BASE

Aerial Rod + Multiple Point + Terminal Base

Mtl - Copper / Copper Alloy

ftom Pract Cee

A

HLA - 144
B HLA - 14
HLA - 154

SIDE MOUNTING ROD BRACKET

Mil : Brass / Gunmetal

Above bracket provides a 75mm projection from the face of a wall.
Mfd. either in Gunmetal or Brass.

Air Rod Product

Diameter (mm) Code

10 HSM - 10
16 HSM - 16
20 HSM - 20

Also available for Aluminium conductor,

please specify your requirement.

LIGHT DUTY SADDLE

Mil : Brass / Gunmetal
Used for supporting lightning conductor Air Terminals.

Max Cond. Width mm Product Code

10 25 HLD - 1025
16 25 HLD - 1625
20 25 HLD - 2025

Also available for Aluminium conductor,

please specify your requirement.

FLAT SADDLE

Mil : Brass / Gunmetal

Used for supporting lightning conductor Air Terminals.

Thread Dia. mm Max Cond. Width mm Product Code

10 25 HFLD - 1025
16 25 HFLD - 1625
20 25 HFLD - 2025

Also available for Aluminium conductor,

please specify your requirement.

84
ELPS ACCESSORIES

FLAT SADDLE -A
Mtl : Brass / Gunmetal
Used for supporting taper pointed or blunt air rods on flat surfaces.

Recommended finishing :- Countersunk woodscrew 1'/," x no. 10 & wall plug.

Rod Length Product Code

50 mm 15mm 5/8" HSD - 155

70 mm 15mm 5/8" HSD - 160
95 mm 15mm 5/8" HSD - 165

* For Gunmetal add ‘G’ after product code.

ROD TO TAPE COUPLING

Mil : Brass / Gunmetal
Used to secure elevation rod by means of a bolted connection

Air Rod Thread Rod Product Code

Dia. mm Dia. mm Material
15 16 Copper HRT - 166

15 16 Aluminium HRT - 16A

* For Gunmetal add ‘G’ after product code.

TAPE CLIP
Mil : Brass
These are used with Bare Copper Tape

Conductor Product Code

Size (mm)

20x3 HTC - 203

25x3 HTC - 253
50 x6 HTC - 506

Also available for Aluminium conductor on request.

DC TAPE CLIP
Mtl: Brass / Gunmetal
These are used with Bare Copper Tape Conductor.

Conductor Product Code

Size (mm)

25x3 HDTC - 253

25 x6 HDTC - 256
40x6 HDTC - 406
50 x6 HDTC - 506

Also available for Aluminium conductor on request.

SQUARE TAPE CLAMP

Mil: Brass / Gunmetal
These are suitable for Four Way Connections of Copper Tape
Conductor Product Code
Size (mm)

25x3 HSTC - 253

25x 4 HSTC - 254
25x 6 HSTC - 256
50 x6 HSTC - 506

Also available for Aluminium conductor on request.

85

AN ISO 9001 COMPANY

AN ISO 9001 COMPANY

ELPS ACCESSORIES

GLAZING BAR HOLDFAST

Mtl : Gunmetal

These are secured to Glazing Bar, Steel Frame, Girdles etc.

The Item is designed for use with appropriate size of metallic on
non-metallic conductor fixing.

Max. Glazing Application Product Code

Bar Width mm with

12 Copper Tape HGBH - 12C

12 Aluminum Tape HGBH - 12A

UNIVERSAL CABLE CONNECTOR

Mil : Stainless Steel / Gunmetal
These are used for connecting Cable Conductors

Conductor Product Code

Size (mm)

70 HUCC - 70
95 HUCC - 95
120 HUCC - 120

* For Gunmetal add ‘G’ after product code.

BACK PLATE HOLDFAST STEM

Mil : Gunmetal

For use with appropriate DC Tape Clip.

It is used when the installation requires the tape to be secured

75 mm away from the face of the building

Prod. Code : HBPH - 12

Also available for Aluminium conductor,

please specify your requirement.

OBLONG TEST CLAMP

Mil : Brass / Gunmetal
These are used with Bare Copper Tape Conductor

Conductor Product Code

Size (mm)

25x3 HOT - 253

40x6 HOT - 406
50x6 HOT - 506

Also available for Aluminium conductor on request.

* For Gunmetal add ‘G’ after product code.
TEST BOND / TEST CLAMP
Mtl : Gunmetal / Brass
These are used for 4 way Copper Tape Connection

Conductor Product Code

Size (mm)
26x12 HTBC - 2612

Also available for Aluminium conductor on request.

* For Gunmetal add ‘G’ after product code.

86
ELPS ACCESSORIES

CABLE TO TAPE JUNCTION CLAMP

Mtl : Brass / Gunmetal

These are used for connecting Copper Tape to Cable

Cable Size mm? | Product Code

25x 3 50 HCTJ - 253

* For Gunmetal add ‘G’ after product code.

INTERFACE TEST CLAMPS

These Clamps are used to connect flat tape to solid circular conductor.
It will also serve for making through joints and tee connections in 8 mm
solid circular conductor.

Application Product

with Code

Copper Conductor © Gunmetal HJYG - 08

Aluminum Conductor Aluminum HJYA - 08

SCREWDOWN TEST CLAMP

Mtl : Brass / Gunmetal
These are used for fixing 2 Way Copper Tape

Conductor Product Gode

iia
25x3 HSDTC - 253
* For Gunmetal add ‘G’ after product code.

TEE CLAMP
Mtl : Brass / Gunmetal

These are used for forming and bonding Tee joint for conductor.

Conductor Product Code a PD

Dia. (mm) 3)

8 Cu HTEC - 8C

8Al HTEC - 8A
* For Gunmetal add ‘G’ after product code.

STRIKE PADS
Strike pad is used where it is not possible to install conductor on the roof
or side of a building. Supplied with a 40mm threaded stud and nut.

Material : Aluminum / Gunmetal \ Gy

Application | Product ——

with Code

Copper Conductor HSPC - 01

Al. Conductor HSPA - 01
* For Gunmetal add ‘G’ after product code.

87

AN ISO 9001 COMPANY

AN ISO 9001 COMPANY

ELPS ACCESSORIES

JOINTING CLAMP
Mil : Brass / Gunmetal
These are used for forming straight through joints.

Conductor Product Code

Dia. (mm)
8 Cu HJC - 8C

8Al HJC - 8A

* For Gunmetal add ‘G’ after product code.

ONE HOLE CABLE CLIP

Mtl : Copper
These are recommended to fix cable conductors

Conductor Product Code

Dia. (mm)

8 HOH - 8
12 HOH - 12
16 HOH - 16
20 HOH - 20

BI-METALLIC CONNECTOR

Mil : Copper & Aluminium

These are used for joining Aluminium & Copper circular or flat
conductors together.

Application Product Code

8 mm Dia. Al to 8 mm Dia. Cu HBI - 8

8 mm Dia. Al to 25 x 3 Cu Tape HBI - 825
20 x 3 Al Tape to 20 x 3 Cu Tape HBI - 203
25 x 3 Al Tape to 25 x 3 Cu Tape HBI - 253
COPPER EARTH/LINK
Product Code : Copper Earth/Link
Finish : Copper/Tinned

HEAVY DUTY CAST CABLE SADDLE

Mil : Brass / Gunmetal

These are used with 8mm conductor or for supporting Air Terminals
when used in conjunction with wall mounted Air Terminal base.

Conductor Product Code

Dia. (mm)
8 HDCC - 8

10 HDCC - 10
* For Gunmetal add ‘G’ after product code.
EARTH BOSS

Material : Body - Mild Steel, Fittings - Stainless Steel

The earth boss is designed to provide and earth point on a steel structure
The boss is welded into place.

Hole Thread Product

Code
10 50 50

HPB - 01

88
ELPS ACCESSORIES

GROUND CLAMPS

UL LISTED
BRASS GROUND CLAMPS

FOR DIRECT BURIAL STAINLESS SCREWS

Fits 8 STR to 4/0 STR AWG

| size _| Product Code

1/2" to 1' HGC - 625 *

1/2" to 1' HGC - 626 @

3/8" to 1" Rebar, 1/2" to 1" Water Pipe, Copper Water Pipe and Ground Rod

1/2" to1" HGC - 626A *

1/2" HGC - 626 BS *
1 1/4" to 2" HGC - 626 B *
2 1/2" to 4" HGC - 626 C *
For Direct Burial - Bronze
1/2" to 1” HGC - 620 DB *
ZINC DIE CAST

Fits 10, 8, 6, 4, & 2 AWG.

For Bare Wire

Product Code
1/2" to 1" HGC - 626Z *
BRONZE / BRASS

Fits 8, 6 or 4 Bare Armored Ground wire

For Armored

1/2" to 1" HGC - 630 B *

11/4" to 2" HGC - 630 *

For Direct Burial - Bronze

1/2" to 2” HGC - 630 DB *

WITH THREADED HUBS FOR CONDUIT PIPE

1/2" to1' HGCH - 621 *

11/4" to 2" HGCH - 622 *
For 1/2" HUB
21/2" to 4" HGCH - 628 *
5" to 6" HGCH - 624
1/2" to 1! HGCH-621A = *
11/4" to 2" HGCH-622A = *
For 3/4" HUB
2.1/2" to 4" HGCH-623A *
5" to 6" HGCH - 624A
1/2" to1' HGCH-621B = *
11/4" to 2" HGCH-622B = *
For 1" HUB
2.1/2" to 4" HGCH-623B = * @
5" to 6" HGCH - 624 B <| | >
_|

* These are UL Listed Ground Clamps.

89

AN ISO 9001 COMPANY

AN ISO 9001 COMPANY

ELPS ACCESSORIES

EQUIPOTENTIAL BONDING BARS

Equipotential Bonding Bar with HIP Plastic Cover and Base suitable
for connecting.

Specification in mm

1 x flat bands to max. 30 x 5 or 8 to 10

1x 8 - 12 round conductor
7 x one or multi-wired conductor to max. 25 mm’ and 16 mm?

ROOF CONDUCTOR SUPPORT

Used for flat roof made up of black, weather resistant plastic a recyclable
filling with one conductor holder.

ea Specification Product Code

8.0 Plastic Enclosed box and Lid HURCH - 010

ROOF CONDUCTOR SUPPORT
Te Specification Product Code |
8/ Typ. HFL Alu. w/Niro Clip HRCS - 007

ROOF CONDUCTOR HOLDER WITH NIRO-CLIP

Universal Roof Conductor Holder as per DIN 48826 B

$.S. 304 Plastic HURCH - 008

30 Copper Plastic HURCH - 009

WALL & ROOF CONDUCTOR HOLDERS

(for attaching wire to wall)
As per DIN 48286 B pit for all the sizes

Specification Product Code

Clips

8.0 / Type HFL $.8./Galvanized/Varnished Niro Clip HNC - 011

8.0 / Type HFL §.S./Galvanized/Varnished Niro Clip HNC - 012
8.0 / Type HFL §.S./Galvanized/Varnished Niro Clip HNC - 013
8.0 / Type HFL S.S./Galvanized/Varnished Niro Clip HNC - 014

WALL & ROOF CONDUCTOR HOLDERS

Niro Clip Snap-on-holder

Used for attaching wires to walls.

Material : Snap - on mechanism and base made up of stainless steel grade 304

Specification Product Code

Metal -Top & Base

8.0 / Type HFL 5.8. 304 HNC - 001

8.0/ Type HFL S.S. 304 6.0 HNG - 002
90
ELPS ACCESSORIES

AL. SQUARE EARTH PLATE WITH AL. PIPE

Used for flat roof made up Al. square plate 1 mm thick with 100 mm
long Al. Pipe

Te Specification Product Code

100 x 100 x 100 Aluminium Earth Assembly HAEA - 010

Max. 3mm

LEAD SQUARE EARTH PLATE WITH LEAD PIPE

Used for flat roof made up Lead square plate 1 mm thick with 30 mm
long Lead Pipe

SES Specification Product Code

100 x 100 x 30 Lead Earth Assembly HLEA - 010

Thick - 1 to 5

CONNECTION CLAMPS & CROSS CLAMPS

NUMBER TAGS

Tey Specification Product Code

8.0 - 10.0 Aluminum HNT - 019
16.0 Aluminum HNT - 020

MULTI CLAMP

Available from 8 mm to 16 mm rod connection

Te Specification Product Code

8.0 - 10.0 S. S. 304 / Glavanized HMC - 024

8.0 - 16.0 Copper HMC - 025

ROUND TYPE EARTH-CLAMP HOLDER -

PLASTIC (NYLON SIX)

8.0 Nylon 6 Clamp HNSC - 028

91

AN ISO 9001 COMPANY

AN ISO 9001 COMPANY

ELPS ACCESSORIES

SQUARE TYPE EARTH-CLAMP HOLDER -

PLASTIC (NYLON SIX)

(3 Specification Product Code
8.0 Nylon 6 Clamp HNSC - 028

NON METALLIC SLATE HOLDFAST

Conductor Product
diameter Colour Code
8mm Grey HHF 191

Variations of tail length, clip size and clip colour can be made to order
as special items.

ROUND DISC HOLDER WITH PVC POINTED

EARTHING ROD ASSEMBLY

8.0 Round Clamp Assembly HRCA - 028

PLASTIC DC TAPE CLIP

Material Specification Product

Code

25x3mm High Impact PVC HPDT - 021

EARTHING PIPE CLAMP

for conductor with a max. diameters of 50 mm2.

eae Specification Product Code

17.2-26.9 Copper / Galvanized tin-plated HEPG - 029

25.0-36.0 Copper / Galvanized tin-plated HEPC - 030
PIPE HOLDER

Nylon - 6 Pipe holder used for earthing pipes.

Specification in mm

1 inch. Pipe clamping attach with two cheese head screw

Product Gode HPHN - 6

92
ELPS ACCESSORIES

WIRE HOLDER
Nylon - 6 Pipe holder used for earthing pipes.

Specification in mm

10 mm Wire clamping attachment with two screw

Product Code HWHP - 6

COMB BAR / EARTHING STRAP /

INSULATED BUS BAR

© Used for multipole bridging of lightning current and over voltage arresters.
© Used to bridge earthing clamps from 2, 3 or 4 over voltage arresters.

56 Single Pin HIB - SP56

56 Single Fork HIB - SF56
28 Double Pin HIB - DP28
28 Double Fork HIB - DF28
19 Triple Pin HIB - TP19
19 Triple Fork HIB - TF19
14 Four Pin HIB - FP14
14 Four Fork HIB - FF14

* Add ‘T’ after Product Code for Tinned Finish

* Std. Length : 1 mir. Also available other length on request.

SADDLE CLAMP AND BASE

i Distance btw. Product Code
holes
7-10 Aluminum HSC - 003
7-10 Copper HSC - 004
END PIECE

Universal Roof Conductor Holder as per DIN 48826 B

TE Specification Product Code

8.0 - 10.0 Aluminum HEPA - 022

8.0 - 10.0 Copper HEPC - 023
8.0 - 10.0 Stainless Steel HEPS - 024

93

AN ISO 9001 COMPANY

AN ISO 9001 COMPANY

ELPS ACCESSORIES

EARTHING CLAMPS
Used to connect the pipes to conductor for earthing.

Special features :-

e Designed & Manufactured under strict and approved quality control procedures,
as per BS 951 standards.

e Availablein 2 Colours:
Red for Non-corrosive dry atmosphere and Blue for corrosive humid conditions.

¢ Available in 3 standard Band Lengths to suit

Pipe diameters of 12mm - 32mm, 32mm - 50mm and 50mm - 75mm.

¢ Available in 2 Terminal Sizes :

A-D for conductors of 2.5mm’ - 10mm’ and A-E for conductors of 2.5 mm’ - 16mm?
(A-E being identified by its Blue safety label)

A-D 2.5mm-10mm? Colour coded Red suitable for HET - 14

clean dry atmospheric conditions

A-D 2.5mm7-10mm? Colour coded Blue suitable Phosphorous HET - 15

for all environment Bronze

A-E 2.5mm’-16mm? Colour coded Blue suitable Phosphorous HET - 16

for all environment Bronze

e Forall above products, larger bands are also available to special order.

© Toincrease the size of conductor usable with HET 16 Earth Clamp, use
one of the HEX range of Cable lugs.

e All Earth Clamps have anodized Aluminium labels indicating terminal size.

RADIATOR EARTHING CLAMPS

These clamps are easy to install and re-instate.

Used in radiators, ceilings, sink units and metal working surface.

It takes wire size of 4 - 6 mm?

BAND EARTH CLAMP

Used to connect the pipes to conductor for earthing

Used for Steel and Copper pipe range between diameter 17 - 115 mm

Specification an Product Code

All parts are of Stainless Steel 3/8" - 11/2" HBEC - 031

17 - 50 mm
3/4" - 4" HBEC - 032
27 - 115mm

94
ELPS ACCESSORIES
EARTH BARS & DISCONNECTING LINKS

Material for Disconnecting Links and Earth Bars :

Bar : 50 mm x 6 mm hard drawn copper bar as per BS EN 13601

Base : Plastic. Also available with Steel Base on request.

Fittings : M10 Hexagon Head Bolts, Nuts & Washers.

Other sizes & combinations of Earth Bars / Disconnecting Links are

manufactured as "Special Items" on request.

Disconnecting Link HDL - 11

EARTH BARS
No. of Product
Seca
HDL 14

3 500 HDL 15

10 600 HDL 16

12 750 HDL 17

14 850 HDL 18

16 950 HDL 19

18 1050 90 HDL 20

20 1150 HDL 21

22 1250 HDL 22

24 1400 HDL 23

26 1500 HDL 24

28 1600 HDL 25

30 1700 HDL 26

EARTH BARS WITH SINGLE DISCONNECTING LINK

No. of Product

Terminations Code
475 HDL 12

8 575 HDL 27
10 675 HDL 28
12 825 HDL 29
14 925 HDL 30
16 1025 HDL 31
18 1125 90 HDL 32
20 1225 HDL 33
22 1325 HDL 34
24 1475 HDL 35
26 1575 HDL 36
28 1675 HDL 37
30 1775 HDL 38

EARTH BARS WITH DOUBLE DISCONNECTING LINKS

No. of Product
li Code

HDL 13

HDL 39
ss 0 se HDL 40
12 900 HDL 41
14 1000 HDL 42
16 1100 HDL 43
18 1200 90 HDL 44
20 1300 HDL 45
22 1400 HDL 46
24 1550 HDL 47
26 1650 HDL 48
28 1750 HDL 49

®
30 1850 HDL 50 <| a >
a

Notes : Dimension L is the overall length. Dimension W is the width of the plastic
base.

95

AN ISO 9001 COMPANY

ELPS ACCESSORIES

SOLID COPPER EARTH PLATE

Mil : Electrolytic Copper

| SZE(AxBxC)_| PRODUCT CODE

600 x 600 x 1.5

600 x 600 x 3
600 x 600 x5
500 x 500 x 3
500 x 500 x 5
900 x 900 x 3
900 x 900 x 5
1000 x 1000 x 3
1000 x 1000 x5

HSCP - 615
HSCP - 63
HSGP - 65
HSCP - 53
HSCP - 55
HSCP - 93
HSCP - 95
HSCP - 103
HSGP - 105

COPPER BONDED EARTH PLATE

Mil : Steel

HBP - 615

600 x 600 x 1.5

600 x 600 x 1.5
600 x 600 x 3
900 x 900 x 3
500 x 500 x3

HBP - 515
HBP - 63
HBP - 93
HBP - 53

EARTH PLATE - LATICE COPPER

Mil : Electrolytic Copper

| SZE(AxBxC)_| PRODUCT CODE

600 x 600 x 3
900 x 900 x 3
500 x 500 x 3

CONDUCTORS

HLP - 63
HLP - 93
HLP - 53
Hard Drawn Copper Bar

Conductor
25x3
25x6
38 x6
50x6
50x 10

75x6

Product
Code
HDCB - 253
HDGB - 256
HDCB - 386
HDCB - 506
HDCB - 5010
HDGB - 756

Tinned on request.

PVC COVERED COPPER TAPE

Conductor | Standard
size coil size

12.5 x 1.5 mm

25x3mm

25 x6mm

50 x6 mm
Std. Colour : Black

50m
50m
25m
20m

Product
Code
HCTI - 125/15
HCTI - 253
HCTI - 256
HCTI - 506

Other colours are available on request.

High conductivity Copper Bar to

BS - 2874 - C101/C103
Supplied in max. lengths of 3 mts.
ELPS ACCESSORIES

CONDUCTORS
Bare Copper Tape
High conductivity Cu Tape to BS - 1432 - C101/C103

Conductor Product Code

(Ax B) mm

20x 1.5 HCT - 2015

25x15 HCT - 2515 B
25 x3 HCT - 253 4
25 x4 HCT - 254 im
25x6 HCT - 256 A
40 x6 HCT - 406
50 x3 HCT - 503
50 x6 HCT - 506

FLEXIBLE COPPER BRAIDS

High conductivity Copper

Wire to BS - 4109 - C101

Suitable for Earth Bonding.

Also supplied as Standard Drilled & Pre-Cut Bonds.

Customer specific sizes & types of braid can be manufactured on order.

Overall Nominal Product Gode

Equivalent Size mm (AxB)

8.75 Bare Braid 15x 1.4 HBB - 151

34.7 Bare Braid 25x 3.5 HBB - 253
34.7 Tinned Braid 25 x 3.5 HTB - 253

CONDUCTORS - SOLID / STRANDED

Bare Solid Circular Conductor

Cu to BS - 1433 - C101 / 103
Al to BS 2898 - 1350

Cross Section Product Code

area mm?

Copper 8 50.27 HBSC - 8C

Aluminium 8 50.27 HBSC - 8A

Bare Stranded Copper Conductor

Soft Drawn Cu Conductor to BS - 6360

Standing Product Code

No. /mm
6

7/1.04 HBCU - 6
16 7/1.70 HBCU - 16
25 7/214 HBCU - 25
35 7/252 HBCU - 35
50 19/1.75 HBCU - 50
70 19/2.14 HBCU - 70
95 19 /2.52 HBCU - 95 <| | »
a

97

AN ISO 9001 COMPANY