Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 76 views

    For Battened Columns For Strength Cal 10% Increase in The KL/R

    Uploaded by

    vineetuk
    This document provides details of a column section and the design of battens to strengthen the column. The column has a gross cross-sectional area of 4564 mm2 and length of 4000 mm. The net section properties and slenderness ratio are also provided. The required spacing and number of battens is then calculated. The design of the battens is shown, with depths of 275 mm and 200 mm selected for the end and intermediate battens respectively. The forces in the battens are checked against the capacities and the weld and batten plate thickness are confirmed to be adequate.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd

    For Battened Columns For Strength Cal 10% Increase in The KL/R

    Uploaded by

    vineetuk
    76 views4 pages
    This document provides details of a column section and the design of battens to strengthen the column. The column has a gross cross-sectional area of 4564 mm2 and length of 4000 mm. The net section properties and slenderness ratio are also provided. The required spacing and number of battens is then calculated. The design of the battens is shown, with depths of 275 mm and 200 mm selected for the end and intermediate battens respectively. The forces in the battens are checked against the capacities and the weld and batten plate thickness are confirmed to be adequate.

    Original Description:

    batten

    Original Title

    Batten

    Copyright

    © © All Rights Reserved

    Available Formats

    XLSX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides details of a column section and the design of battens to strengthen the column. The column has a gross cross-sectional area of 4564 mm2 and length of 4000 mm. The net section properties and slenderness ratio are also provided. The required spacing and number of battens is then calculated. The design of the battens is shown, with depths of 275 mm and 200 mm selected for the end and intermediate battens respectively. The forces in the battens are checked against the capacities and the weld and batten plate thickness are confirmed to be adequate.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    76 views4 pages

    For Battened Columns For Strength Cal 10% Increase in The KL/R

    Uploaded by

    vineetuk
    This document provides details of a column section and the design of battens to strengthen the column. The column has a gross cross-sectional area of 4564 mm2 and length of 4000 mm. The net section properties and slenderness ratio are also provided. The required spacing and number of battens is then calculated. The design of the battens is shown, with depths of 275 mm and 200 mm selected for the end and intermediate battens respectively. The forces in the battens are checked against the capacities and the weld and batten plate thickness are confirmed to be adequate.

    Copyright:

    © All Rights Reserved
    Download as XLSX, PDF, TXT or read online from Scribd
    Download as xlsx, pdf, or txt
    of 4

    y

    300 mm
    single section details

    A
    bf
    tf
    Ixx
    Iyy

    4564 mm2
    90 mm
    13.6 mm
    63626000 mm4
    3108000 mm4

    Cyy
    rxx
    ryy

    gross area
    flange width
    flange thk

    23.6 mm
    118.1 mm
    26.1 mm

    length of the column

    4000 mm

    NET section details


    A
    IXX
    IYY
    Rxx
    Ryy
    Rmin
    kl/rmin

    9128 mm2
    127252000 mm4
    152053691 mm4
    118.07134 mm
    129.065648 mm

    OK

    118.07134 mm
    33.8778233

    for battened columns for strength cal 10% increase in the kl/r
    i.e for kl/r 33.8778233
    section capacity

    ac
    1296.176 KN

    142 N/mm2

    BATTEN DESIGN
    1

    Ryy

    >

    Rxx

    OK

    SLENDERNESS RATIO
    KL/R
    33.87782
    2

    C/C SPACING OF BATTEN

    618.9478 mm

    NO OF DIVISIONS REQUIRED
    EXACT C/C SPACING

    571.429 mm

    VT

    32.4044 KN

    TRANSV SHEAR ANY PT ON COLUMN

    VB

    33.06571 KN

    M
    3

    SHEAR IN BATTEN

    4.6292 KNm

    MOMENT IN BATTEN

    depth of batten plate

    252.8

    say

    275 mm

    depth of batten plate

    189.6

    say

    200 mm

    say

    6 mm

    THK

    6 mm

    CHECK FOR FORCES


    M

    4.6292 KNm

    Mr
    VB
    VBr

    6 KNm
    33.0657143 KN
    120 KN

    WELDING

    MOMENT IN BATTEN
    >

    OK

    SHEAR IN BATTEN
    >

    VB

    OK

    6 mm thk

    LENGTH REQUIRED FOR SHEAR

    36.08723 mm

    <

    END BATTEN PLATE


    INTERMEDIATE BATTEN PLATE

    BATTEN PLATE THICKNESS

    200 mm thk

    HENCE

    OK

    You might also like