New Features In: The Ultimate FEA Program

Dlubal Software
Contents
Page
1 General Features
2 Structural Input
10
3 Load Input and

Design
17
4 Output of Results
20
5 Add-on Modules
23
December 2012
New Features in
The Ultimate FEA Program
Follow us on:
Dlubal Engineering Software Am Zellweg 2 D-93464 Tiefenbach info@dlubal.com www.dlubal.com
1 General Features
RFEM 5
1 General Features
Now, when you create a new model (structure), you can

select the design standard that you want to use. You can
also decide if you want to create load or result combinations automatically.
In addition, you can use previously saved model templates.
The orientation of the global z-axis defined in the dialog
box can be changed subsequently.
New Features
Creating a New Model (Structure)
New Project Navigator - Views

A new tab was added to the Project Navigator. In the
"Views" tab you can easily generate various views. It is
also possible to save them for reuse.
New Program Languages

Six new program languages were implemented. Now it is
possible to work with a German, English, Czech, Italian,
Spanish, French, Portuguese, Polish and Russian user
interface.
Dlubal Engineering Software Software for Structural and Dynamic Analysis
Now, you can assign different colors to different objects

of the structure for a clear arrangement of the construction's rendered presentation. RFEM distinguishes between
Materials
Cross-sections
Member types
Member releases
Surface types - geometry
Surface types - stiffnesses
Surface thickness
Surface sides
New Features
Display Properties
RFEM 5
1 General Features
Solid types
User-defined visibilities
Configuration Manager
With the new Configuration Manager you can specify
user-defined settings for display, program options,
toolbars etc. and save them as separate configurations.
Several configurations can be stored.
Moving and Copying in Defined Coordinate

System
Now, it is possible to move or copy objects in a userdefined system of coordinates.
64-bit Version
RFEM 5 is provided as complete 64-bit version.
RFEM 5
1 General Features
New Features
Thus, you can use all resources available in your computer

and perform complex and extensive calculations.
New Rendering Options

Transparent display model
In addition to the wireframe display and the solid
model, it is possible to represent the rendered structure as transparent model. The intensity of transparency can be set in the program options.
Loading
Loads can be displayed as filled transparent.
Lighting
You can activate six different lights and display light

positions.
Repeat Recent Function

The recently used function can be easily repeated. Use
the [Enter] key on your keyboard, or select the Repeat
function in the context menu that you open by a rightclick into the work window.
Now, the Display navigator offers the possibility to set

object properties that you want to be displayed in the
object's pre-selection, for example you can set the member orientation, tension sides or member axis systems for
members.
New Features
Preselection
RFEM 5
1 General Features
Easy Deletion of Module Data

Data of add-on modules can be deleted easily in the Data
navigator.
New Options for Work Plane and Grid/Snap

The snap distance can be adjusted manually.
You can create a user-defined coordinate system directly
in the dialog box available for work planes.
The object snap can be activated for background layers,
line grids and guidelines.
Now, you can decide whether you want to display only
the model or all included guidelines in the "Show Whole
Model" view. For example, if you use guidelines running
far beyond the structure, you can set this new option to
display only the structure in the window-filling view.
New Work Planes

You can define new work planes:
RFEM 5
1 General Features
With line in X (definition by line and x-direction)

With line in Y (definition by line and y-direction)
With line in Z (definition by line and z-direction)
Axes xy of members (definition of a plane in the xyaxis of a member to be selected)
Axes xz of members (definition of a plane in the xzaxis of a member to be selected)
Axes xy of surfaces (definition of a plane in the xy-axis
of a surface to be selected)
New Features
3 points plane (free definition of a plane by clicking 3

points)
Offset (offsetting the previously selected work plane
by a certain value)
Comments in Planes
Comments can be entered in the planes X-Y, Y-Z, X-Z or
the current work plane. Moreover, they can be rotated.
Conversion of Node Coordinates

You can enter a node with reference to a previously entered node and RFEM provides the option to convert the
node coordinates automatically relating to the zero point.
Templates
New Features
You can save a model as template. When you create a

new model, it is possible to import such a template.
RFEM 5
1 General Features
Clipping Plane
Now you can define a virtual plane clipping the structure.
You can decide if you want to see the cut-off area that is
in front of or behind the clipping plane.
The plane can be shifted gradually.
New Program Options

Different intensities of transparency can be defined for
members, surfaces, solids, supports, loads and results of
isosurfaces.
Pictures can be compressed for printing.
Furthermore, you can activate the automatic search for
updates.
New Dimension: Height Level
New Features
Structures can be described by height indications.
RFEM 5
1 General Features
Object Selection in Data Navigator

Now, when objects like nodes, lines, cross-sections,
members, surfaces etc. are marked in the Data navigator,
they are also selected in the graphic.
Inserting Visual Objects

3D objects such as cars, people etc. can be inserted now.
Use this option to illustrate for example the size of the
structure in relation to those objects.
MSI Installation
An MSI installation is used for RFEM 5. MSI installations
can be distributed more easily to client computers in a
network with a Microsoft server.
Moreover, two separate installations are available, a 32bit version and a 64-bit version.
Grid Lines in Work Plane
New Features
The active work plane can now be displayed with grid

lines. The spacing of grid lines can be modified in both
directions.
RFEM 5
1 General Features
Panel for Variable Surface Thicknesses

Variable thicknesses of surfaces can be displayed as color
gradient. The color scale can be modified in the panel.
Selection with Ellipse or Annulus

With this new option you can select objects by means of
an ellipse or annulus.
2 Structural Input
RFEM 5
2 Structural Input
The following new member types were implemented:

Rigid member
Cable on pulleys (sheave)
Result beam (integrating stresses and internal forces)
Stiffnesses
Spring
New Features
New Member Types
Line Grid
Now you can create a line grid quickly in the Cartesian
coordinate system. Furthermore, it is possible to specify
the grid with markings and dimensions.
Moreover, you can create spherical or cylindrical grids.
You can also rotate the grid about one or more axes.
In addition, you can save settings for the line grid and
reimport them later.
Relative Member Eccentricity

Now you can assign a relative and automatic member
eccentricity to a member.
For example, it is possible to align the bottom edge of a
member with the top edge of a reference member. The
advantage is that the member eccentricity will be adjusted automatically when cross-sections change.
10
The cross-section database was reorganized and extended by corresponding standards. Now the library is arranged more clearly. With the filter option it is possible to
show beams of particular standards, sectional shapes or
section types.
For example you can look at all I-sections of medium size
shown in a table.
Materials can be defined optionally. In addition, you can
summarize the most frequently used cross-sections in a
favorites list.
New Features
New Cross-section Library
RFEM 5
2 Structural Input
Combined Timber Cross-sections

The cross-section database offers new profiles: combined
timber cross-sections. A wide range of cross-section
shapes is provided, for example U-beams, T-beams, Ibeams and box-shaped beams.
Single elements are combined by rigid or semi-rigid connections.
Now it is possible to calculate elements produced by
LIGNATUR and LIGNOTREND.
Furthermore, you can select a hybrid cross-section. In a
separate dialog box you can assign different materials to
individual cross-sections.
Displaying Components from Intersections

Now, individual components of intersections are displayed.
The display makes it easier to edit and modify data subsequently.
11
Another important function was added for the creation of

solid models: Now you can use compound solids. Two
solids can be merged by means of Boolean operators. It is
also possible to subtract a solid or to create the intersecting set from both volumes.
New Features
Compound Solids
RFEM 5
2 Structural Input
New Material Models

The following new material models are now available:
Orthotropic elastic 3D
Isotropic elastic-plastic 1D/2D/3D *
Isotropic nonlinear elastic 2D *
Orthotropic elastic-plastic 3D *
Isotropic thermal-elastic *
Isotropic masonry 2D *
* Add-on module RF-MAT NL is required
Non-linearities of Supports
The following support non-linearities were added:
Failure all, if P positive
Failure all, if P negative
Partial activity
Diagram
Use these options to consider for example slippage as
well as tearing or yielding arising from a particular support force.
Friction
You have to define the corresponding friction values.
12
Non-linearities of Releases
The following release non-linearities were added:
Failure, if force/moment positive
RFEM 5
2 Structural Input
Partial activity
Diagram
Use these options to limit for example the torsion of a
release.
New Features
Failure, if force/moment negative
Surface Support
Now you can define surface supports. For example, when
creating a symmetric or rotationally symmetric solid
model, you can model only a part of it. In this way, calculation time can be reduced.
Modifying the Axis System of Solids

The axis systems of solids can now be aligned with surfaces, lines and points.
Moreover, axes can be aligned with a user-defined system
of coordinates.
13
Now, RFEM allows for the arrangement of scissors releases. With scissors you can model a crossing of two members whose diagrams of moments, shear or axial force do
not affect each other (helpful for example for rafter-purlin
systems).
New Features
Scissors Releases
RFEM 5
2 Structural Input
New Solid Types

New solid types were added to the already existing types
Contact and Solid:
Gas
Gas between two surfaces
Null
Tangents to Circles or Arcs

You can apply tangents to two circles or arcs. Moreover,
you have the option to trim existing arcs.
14
The material library was extended by several filter options

and lots of new materials in accordance with various
standards. In addition, the material database was
optimized so that the library opens faster.
New Features
New Material Database
RFEM 5
2 Structural Input
New Options for Openings

A variety of new openings can be easily created, for
example a rectangle with fillets, a parallelogram, triangle,
circular segment, polygon etc.
In addition, you can create openings by using lines, arcs
and ellipses for modeling. Then, select the objects with a
selection window.
New Options for Solid Input

Now you can create solids with a special function. Model
the respective base area and extrude the surface to a
parallel plane or point.
15
New FE Mesh Generators for Solids
New Features
RFEM 5 uses a new generator (T3D) for creating the mesh

on solids. In many cases, a better mesh is created.
RFEM 5
2 Structural Input
Set Nodes Between two Nodes

It is possible to set a new node between two existing
nodes. The distance to adjacent points can be selected
freely. Relevant points such as nodes, snap points and
grid points may lie in one plane or anywhere in the
workspace.
Modifying Cross-section Properties and

Stiffnesses
Cross-section properties can be modified by means of a
factor. In addition, it is possible to modify stiffnesses of
members.
16
3 Load Input and Design
RFEM 5
Now load cases and actions are entered in a new table.

It is possible to create load and result combinations automatically after you have selected the relevant combination rules.
The table data is clearly-arranged and you can copy, add
or renumber load cases.
In addition, it is possible to control load cases and combinations in tables 2.1 to 2.6.
New Features
Automatic Creation of Combinations
Loads from Multilayer Structure

Now you have the possibility to define and save multilayer structures such as ceilings and floor structures
which can be applied later as surface or member loads
(with load application width).
Surface Loads on Openings

You can apply surface loads to openings. RFEM will generate automatically the corresponding line loads on the
boundary lines of the opening.
17
Input of Inclination and Precamber in Absolute

Values
New Features
In addition to the relative input of imperfections, you can

now enter imperfections with absolute values.
RFEM 5
Additional Calculation Parameters

Some new options were added to the calculation parameters. For example, when the model is calculated according to second-order analysis, you can relate the internal
forces to the deformed structure.
For the calculation according to large deformation analysis the following approaches are now additionally available.
Newton-Raphson combined with Picard
Picard
Newton-Raphson with constant stiffness matrix
Moreover, it is possible to modify stiffnesses of materials,
cross-sections, supports and releases by load case or load
combination.
New Member Loads

The following new load types were added:
Initial prestress
End prestress
Imposed displacement
Imposed rotation
Pipe content - full
Pipe content - partial
Rotary motion
18
The following new surface load was added:

Rotary motion
The following new solid loads were added:
Force
Buoyancy
Rotary motion
New Features
New Surface and Solid Loads
RFEM 5
Generated Area Loads Variable in Direction x

and y
When generating area loads, you can apply variable loads
not only in direction z but also in x and y.
Generation of Loads from Motions

It is possible to generate member, surface or solid loads
from motions. Thus, braking and accelerating forces can
be considered. Loads can be produced from straight-line
and rotary motions.
19
4 Output of Results
RFEM 5
4 Output of Results
Model, loading and results can be printed in series. RFEM

creates several graphics viewed from different directions
to be specified.
For example, it is possible to print all internal forces in
isometric view by a single mouse-click.
New Features
Mass Print
Section through Solid

Now, diagrams of deformations and stresses are displayed in the intersection plane when you cut trough
solids.
Smoothing Singularities
By defining smooth ranges it is possible to smooth singularities in results.
20
The printout report opens already during the generation

of all pages. Thus, it is quickly available for display.
In addition, it is possible to print the report directly in a
PDF file.
New Features
Printout Report
RFEM 5
4 Output of Results
Output of Member Coefficients and Member

Slendernesses
Now, table 4.8 shows the member coefficients y and z
which depend on the member length, axial force and
flexural resistance.
Table 4.9 lists the member slendernesses.
Animation of Surface Stresses and Internal

Forces
It is possible to animate internal forces and stresses of
surfaces, illustrating the changing distribution of internal
forces and stresses for load increments.
21
Convergence Diagram
New Features
The convergence curve is shown in a table and represented as diagram. So you can see how many iteration
steps were needed until convergence was reached.
RFEM 5
4 Output of Results
22
5 Add-on Modules
RFEM 5
5 Add-on Modules
Now RF-STEEL EC3 is able to design result combinations

(formerly: load combinations). In addition, the memory
management was optimized which allows for a faster
calculation. The cross-section classification for the respective load case is now shown by cross-section, by member
and by x-location.
New Features
RF-STEEL EC3
CRANEWAY
The following new features were implemented:
Calculation according to EN 1993-6 (Eurocode 3) with
national annexes (NAs) for Germany, Czech Republic,
Finland, Cyprus and Italy
Available designs according to:
EN 1993-1-5 (plate buckling analysis of unstiffened
plates)
EN 1993-1-8 (design of welds)
EN 1993-1-9 (fatigue design)
Design of overhead cranes acc. to EC 3 as single- or
multi-span beam by second-order analysis for torsional buckling
Design of non-continuous welds
Separate design of welds for ao and au for welded
cross-sections
Calculation of deformation according to EC 3
Load case table for clear representation of load combinations with information about loading, dynamic
coefficients and partial safety factors for the design
situations: ultimate limit state, fatigue and deformation of support forces.
New 3D rendering
Detailed output of single load cases and combinations
for the respective design situation
PLATE-BUCKLING
PLATE-BUCKLING provides the following new features:
Design according to EN 1993-1-5, chapter 10, with NAs
of Germany, Czech Republic, Finland, Cyprus and Italy
by method of reduced stresses
Available restraints (for example adjacent structural
components) are taken into account in the form of a
spring stiffness.
Optional designs for all eigenmodes
23
The following features are new:

Analysis core for calculation of required reinforcement
in ultimate limit state
Unification of definition of reinforcement sides
(top/bottom) for both possible directions of global
coordinate system
Description of reinforcement layer depending on local
z-axis of surface
Calculation of required reinforcement for different design situations in the ultimate limit state in one calculation run
Definition of calculation method for result combination or for several load combinations selected for design. It is possible to calculate loads either individually
one after the other or by means of an envelope.
New Features
RF-CONCRETE Surfaces
RFEM 5
5 Add-on Modules
Design with smoothed internal forces in predefined

smooth ranges (for example singularities above columns)
Efficient layout of required longitudinal reinforcement
for crack width analysis according to EN 1992-1-1
Definition of different maximum allowable crack
widths at top and bottom side
Copy function for existing reinforcement groups
Option to specify manually the direction of principal
compression for walls when calculating the minimum
longitudinal reinforcement
Calculation of minimum longitudinal reinforcement
for ductile behavior of structural components acc. to
9.3.1, EN 1992-1-1 or 13.1.1, DIN 1045-1 as well as calculation of minimum shear reinforcement acc. to 9.32,
EN 1992-1-1 or 13.3.3, DIN 1045-1 possible
User-defined control of partial safety factors of materials used for different design situations or limit states
Optimized graphical results output (display of reinforcement applied for SLS design, of ratio VEd / VRd,c, of
result values in reinforcement direction)
Improved output of design details for each design
point in the ultimate limit state
24
The following new features were implemented:

Calculation of required reinforcement for different design situations in ultimate limit state in one calculation
run
Description of reinforcement layer depending on local
z-axis of members
Definition of different maximum allowable crack
widths at top and bottom side
Optional calculation of minimum longitudinal reinforcement for ductile behavior of structural components acc. to 9.3.1, EN 1992-1-1 or 13.1.1, DIN 1045-1
as well as calculation of minimum shear reinforcement
acc. to 9.32, EN 1992-1-1 or 13.3.3, DIN 1045-1
New Features
RF-CONCRETE Members
RFEM 5
5 Add-on Modules
User-defined control of partial safety factors of materials used for different design situations or limit states
Optimized reinforcement output for circulating reinforcement layout and for reinforcement in corners
Results output in tables of total reinforcement amount
available in cross-section by x-location
Improved output of design details for stress conditions of provided reinforcement in the ultimate limit
state design
Extension of envelope to be designed for result combinations. In addition to the extreme values of internal
forces, the program takes into account the extreme
values of cross-section stresses (important for example for double bending).
RF-CONCRETE Columns
RF-CONCRETE Columns offers the following new features:
run
Optional calculation of minimum longitudinal reinforcement for ductile behavior of structural components acc. to 9.3.1, EN 1992-1-1 or 13.1.1, DIN 1045-1
as well as calculation of minimum shear reinforcement
acc. to 9.32, EN 1992-1-1 or 13.3.3, DIN 1045-1
User-defined control of partial safety factors of materials used for different design situations
25
RF-CONCRETE NL
The following items are new:
RFEM 5
5 Add-on Modules
Calculation of crack width taking into account tension

stiffening of concrete applied between cracks
Additional options to consider the concrete's tension
behavior for calculations
Optional export of stiffnesses from non-linear calculation for further use in RFEM
Graphical output of nonlinear support reactions
Graphical output of enveloping results for calculation
of several loads
New Features
Considering influence from shrinkage on non-linear

calculation
Non-linear calculation of spatial frameworks in the

limit states for load bearing capacity and serviceability
RF-PUNCH
New features in RF-PUNCH:
run
Input of properties for nodes of punching shear for
several common punching shear points
Transfer of already defined properties for nodes of
punching shear to other punching shear nodes
Choice between user-defined specification and automatic determination of axial force acting on the perimeter
User-defined control of partial safety factors of materials used for different design situations
26
RF-TIMBER Pro offers the following new features:

Radius of curvature is considered and transversal tension stresses are calculated for the design of curved
members
Calculation of result combinations is possible
Optional calculation and graphical display of stress
points
Possibility to reduce stiffness due to creep effects in
service classes 2 and 3
Stability analysis can be deactivated globally
Design of built-up cross-sections (including multi-part
cross-sections such as horizontal beams for edges),
with option for yield
New Features
RF-TIMBER Pro
RFEM 5
5 Add-on Modules
RF-LAMINATE
The following new features were added:
Optional output of strains x and y as well as of distortions xy in individual layers
Output of stresses of selected points in printout report
Optional output of graphical stress diagrams in
printout report
27
Get to know us
Upgrades
Would you like to know more about RFEM?

Request more information and a free trial
version. Or simply download the free trial
version at www.dlubal.com.
You are already using RFEM?

Get the upgrade to RFEM 5.
Please contact us, or order online at
www.dlubal.com.
Use the trial version with fully functional

features to test RFEM 5. Get familiar with the
program handling, take all the time you
need to explore all program details and see
yourselfhow easy it is to work with RFEM.
Find further information on our website
www.dlubal.com, for example videos
helping you to get started with our software.
If you are interested in technical details, read
the program manuals available for download in PDF file format. Or browse the FAQ
page where you may find some solutions for
everyday problems occurring in many engineering offices.
Of course, we would also be happy to speak
with you directly by phone or video call.
Our qualified engineers can assist you fast
and personally. Modern technologies such as
desktop sharing tools allow us to support
you in no time and anywhere in the world
where Internet is available.
If you are not sure which modules you need,
we help you to create a software package
that suites you best and meets your individual needs.
Service contracts
Top customer service is one of the main
cornerstones of the Dlubal company mission.
The interest in our customers does not end
at the point of sale.We offer additional
support if it is needed for your daily work.
With a service contract you get the upgrade to RFEM 5 at better rates. For more
information about our service contracts,
contact us directly or visit our website at
www.dlubal.com
Steel
Concrete
Timber
Dynamics
Glass
Technical
support
Our technical engineers are available to all
customers whenever there is a question
about Dlubal programs.
Just send your question by email or fax. The
questions will be answered in the order
received and only after enquiries of customers having a service contract have been
completed.
The extent and speed of response depend
on the type of service contract you have
purchased.
We welcome any feedback you may have
on our products.
Your comments and suggestions for improvements are important to us.
Further
Information:
Dlubal Engineering Software
Am Zellweg 2, D-93464 Tiefenbach
Tel.: +49 9673 9203-0
Fax: +49 9673 9203-51
www.dlubal.com
info@dlubal.com
Follow us on:
Dlubal Engineering Software Software for Statics and Dynamics

New Features In: The Ultimate FEA Program

Uploaded by

Copyright:

Available Formats

New Features In: The Ultimate FEA Program

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

New Features In: The Ultimate FEA Program

Uploaded by

Copyright:

Available Formats

Dlubal Software

3 Load Input and

The Ultimate FEA Program

Dlubal Engineering Software Am Zellweg 2 D-93464 Tiefenbach info@dlubal.com www.dlubal.com

Now, when you create a new model (structure), you can

Creating a New Model (Structure)

New Project Navigator - Views

New Program Languages

Dlubal Engineering Software Software for Structural and Dynamic Analysis

Now, you can assign different colors to different objects

Moving and Copying in Defined Coordinate

Dlubal Engineering Software Software for Structural and Dynamic Analysis

Thus, you can use all resources available in your computer

New Rendering Options

You can activate six different lights and display light

Repeat Recent Function

Dlubal Engineering Software Software for Structural and Dynamic Analysis

Now, the Display navigator offers the possibility to set

Easy Deletion of Module Data

New Options for Work Plane and Grid/Snap

Dlubal Engineering Software Software for Structural and Dynamic Analysis

New Work Planes

With line in X (definition by line and x-direction)

3 points plane (free definition of a plane by clicking 3

Offset (offsetting the previously selected work plane

Conversion of Node Coordinates

Dlubal Engineering Software Software for Structural and Dynamic Analysis

You can save a model as template. When you create a

New Program Options

Dlubal Engineering Software Software for Structural and Dynamic Analysis

New Dimension: Height Level

Structures can be described by height indications.

Object Selection in Data Navigator

Inserting Visual Objects

Dlubal Engineering Software Software for Structural and Dynamic Analysis

Grid Lines in Work Plane

The active work plane can now be displayed with grid

Panel for Variable Surface Thicknesses

Selection with Ellipse or Annulus

Dlubal Engineering Software Software for Structural and Dynamic Analysis

The following new member types were implemented:

New Member Types

Relative Member Eccentricity

Dlubal Engineering Software Software for Structural and Dynamic Analysis

New Cross-section Library

Combined Timber Cross-sections

Displaying Components from Intersections

Dlubal Engineering Software Software for Structural and Dynamic Analysis

Another important function was added for the creation of

New Material Models

Dlubal Engineering Software Software for Structural and Dynamic Analysis

Failure, if force/moment negative

Modifying the Axis System of Solids

Dlubal Engineering Software Software for Structural and Dynamic Analysis

New Solid Types

Tangents to Circles or Arcs

Dlubal Engineering Software Software for Structural and Dynamic Analysis

The material library was extended by several filter options

New Material Database