Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 91 views

    Aqualine 300 TDS

    Uploaded by

    8612106535
    This technical data sheet provides information on Aqualine 300, a two-component, 100% solids elastomeric coating for use in dirty water applications. It adheres well to concrete structures and offers chemical resistance and protection against biological growth. Aqualine 300 has a black or grey color, cures within 2-7 days depending on temperature, and has a shelf life of 12 months when stored properly. It is suitable for use on structures like sewage digesters and channels to protect against chemicals and bacteria in waste water.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Aqualine 300 TDS

    Uploaded by

    8612106535
    91 views2 pages
    This technical data sheet provides information on Aqualine 300, a two-component, 100% solids elastomeric coating for use in dirty water applications. It adheres well to concrete structures and offers chemical resistance and protection against biological growth. Aqualine 300 has a black or grey color, cures within 2-7 days depending on temperature, and has a shelf life of 12 months when stored properly. It is suitable for use on structures like sewage digesters and channels to protect against chemicals and bacteria in waste water.

    Original Description:

    A two component elastomer

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This technical data sheet provides information on Aqualine 300, a two-component, 100% solids elastomeric coating for use in dirty water applications. It adheres well to concrete structures and offers chemical resistance and protection against biological growth. Aqualine 300 has a black or grey color, cures within 2-7 days depending on temperature, and has a shelf life of 12 months when stored properly. It is suitable for use on structures like sewage digesters and channels to protect against chemicals and bacteria in waste water.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    91 views2 pages

    Aqualine 300 TDS

    Uploaded by

    8612106535
    This technical data sheet provides information on Aqualine 300, a two-component, 100% solids elastomeric coating for use in dirty water applications. It adheres well to concrete structures and offers chemical resistance and protection against biological growth. Aqualine 300 has a black or grey color, cures within 2-7 days depending on temperature, and has a shelf life of 12 months when stored properly. It is suitable for use on structures like sewage digesters and channels to protect against chemicals and bacteria in waste water.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 2

    Technical Data Sheet

    Revision Date: 15.03.10

    AQUALINE 300
    PRODUCT INFORMATION
    Description

    A two component 100% solids ambient


    temperature applied elastomeric coating
    system developed specifically for use in
    dirty water applications.

    Features

    Elastomeric properties
    accommodate normal concrete
    expansion.
    Excellent chemical resistance to
    a broad range of conditions.
    Contains a biocide to resist
    biological growth.

    Recommended
    Applications

    Suitable for use on concrete structures


    where protection is required typically
    sewage digesters, channels and other
    waste water situations

    Package
    Size

    3.4L and 17L

    PRODUCT DATA
    Colour

    P Component is Clear
    C Component is Black or Grey
    Mixed product is Black of Grey

    Mix Ratio by Volume


    Mix Ratio by Weight
    % Solids by Volume
    Pot life at 15oC (Mins)
    Pot life at 25oC (Mins)
    Pot life at 35oC (Mins)
    Wet film build (mm)

    2.86 : 1
    2.15 : 1
    100
    45-60
    30-40
    15-25
    Horizontal 1, Vertical 0.5-0.75

    Performance
    Properties

    Tensile Strength (MPa) BS6903 Part A2


    Elongation (%)BS6903 Part A2
    Temperature resistance (oC)
    Coverage
    Cured Hardness (Shore A) BS6903 Part A57

    10-15
    350-450
    Maximum 65
    1.0 L/m2/mm dft
    85-90

    Disclaimer

    All information on this data sheet is based on laboratory testing and is not intended for design purposes.
    Irathanefutura makes no representations or warranties of any kind concerning this data.
    For further product information or technical assistance please call +44 (0) 870 458 7336 or mail
    enquiries@irathanefutura.com

    Physical
    Properties

    Technical Data Sheet

    Revision Date: 15.03.10

    Aqualine 300
    APPLICATION INFORMATION
    Surface
    Preparation

    Proper surface preparation is essential to achieve the full potential of the system. Consult the
    relevant method statement for the application / substrate in question.
    Product should only be applied in conditions where the Temperature is >3oC above the dew
    point and Relative is <85%

    Mixing

    Prior to commencing use of the product ensure that the two components are stored a
    temperature of no lower than 20oC, a temperature of around 25oC is preferable and can be
    achieved by means of indirect heating with water or in a heated room.
    Thoroughly mix the C component prior to use. Transfer all of the C component into the P
    component and mix thoroughly using a variable speed mixer with a spiral or jiffy type mixer
    paddle taking care not to mix air into the product. Minimum mixer speed should be 800 rpm.
    Mix the product for 2 minutes, scrape the sides of the container with a long bladed spatula to
    ensure there is no unmixed product then mix for a further 1 minute. Transfer the contents into
    another container and mix for a final minute.
    DO NOT BREAK DOWN KITS

    Application

    On horizontal surfaces the product can be applied by roller or poured directly onto the surface
    and spread out using a squeegee and if required finished with a roller.
    On vertical surfaces it should be applied by roller or brush with care to avoid over application
    and subsequent running.
    Review the appropriate method statement for detailed application instruction.

    Cure

    Cure times are quoted in the table below.

    Cure Walk on @ 1.5mm (Hours)


    Cure Light Duty @ 1.5mm (Days)
    Cure 80% @ 1.5mm (Days)
    Cure 100% @ 1.5mm (Days)
    Recoat Time minimum (Minutes)
    Maximum without reactivation (Hours)
    Solvent Wipe + Irabond UU55
    Abrade, solvent wipe + Irabond UU55

    10oC
    4
    1-2
    14
    20
    90
    16
    16-36
    >36

    20oC
    3
    1-2
    7
    12
    60
    8
    8-24
    >24

    30oC
    2
    1-2
    3
    7
    30
    6
    6-12
    >12

    Clean Up

    All equipment should be thoroughly cleaned directly after use using EC19, MEK or suitable
    alternative.

    Shelf life &


    Storage

    A shelf life of 12 months from date of shipment can be expected when stored at room
    temperature (22C) in their original containers.

    Precautions

    For complete safety and handling information, please refer to Material Safety Data Sheets prior
    to using this product.

    Warranty

    Irathanefutura will replace any material found to be defective. Because the storage, handling and application of this
    material is beyond our control we can accept no liability for the results obtained.

    Irathanefutura a division of ITW Unit 3, Shipton Way, Express Business Park, Northampton Road, Rushden, NN10 6GL
    Phone 0870 4587336 Fax 0870 4589077 www.irathanefutura.com

    You might also like