Wi-Fi N ROUTER

N300 User Manual

F9K1002V4 8820-00774 Rev. C01
Table Of Contents

Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Using Your Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Enabling Auto Update on Your Belkin Router . . . . . . . . . . . . . . . . . . . . . 24
Whats in the Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Updating Your Router via Your System Tray
Initial Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 (Windows) or Menu Bar (Mac) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Advanced Tools & Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Updating the Routers Firmware via the Web Interface . . . . . . . . . . . . 27
The Belkin Router Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Resetting the Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Adding Computers to Your Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Restoring Your Router to Factory Defaults . . . . . . . . . . . . . . . . . . . . . . . 31
Manually Set Up Your Internet Connection . . . . . . . . . . . . . . . . . . . . . . . 13 Restoring the Router to Default Settings Using the Web Interface . . 32

Getting to Know Your Router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Troubleshooting, Support, and Warranty . . . . . . . . . . . . . . . . . . . . 35

Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Back Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21 Technical Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Belkin International, Inc., Limited 2-Year Product Warranty . . . . . . . . 43

Technical Details . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Regulatory Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Technical Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23 FCC Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Getting Started

Whats in the Box Initial Setup

N300 Wi-Fi N Router

Where to Place Your Router
Ethernet cable (attached to router)
For the best results, place the Router next to your modem in
Power supply (attached to router) an open location away from large metal objects and magnets
such as those found in speakers. Raising the Router above
Network information card (attached to router) floor level can improve the strength of your wireless signal.

Belkin Setup CD with User Manual

Quick Setup Guide

1
Getting Started N150/300/450
Steps 1 & 2

How to Set It Up

1
Connect Your N300 Router

1. Turn off your modem by disconnecting its power supply.

2. Connect your Router to your modem using

the cable (already attached).
2

2
Getting Started N150/300/450
Steps 3 & 4

3. Power up your modem by plugging in its power supply.

4. Power up your Router by plugging in its power supply.

3
Getting Started

Run the Installer Software

Insert the included CD into your computer. Find the setup

program and open it. It should run automatically; if not, find
the setup program and open it. Follow the prompts. Setup
The setup software will configure your Internet connection
and let you know when things are working.

If you have DSL, you may need a username and

password from your Internet provider.

4
Getting Started

1. Click the Setup icon on the CD menu.

5
Getting Started

2. After a brief installation, the setup software will ask you for the
network name and password from the network information card that
is stored in the foot of your new Belkin Router. Store the card under
the base of your Router for future reference.

6
Getting Started

3. A progress screen will appear while additional software is

installed. This may take a few minutes to complete. Once
finished, a Success message will appear indicating that you
are connected to the Internet via your new Belkin Router.

During setup you may be asked for additional information.

You may need to enter a username and password provided

by your ISP. This username and password is likely to be
found on materials that came from your ISP when you
signed up for service. If necessary, you may need to contact
your ISP to retrieve your username and password.

If you have a static IP address, you may need to enter

additional information also provided by your ISP.

If your computer doesnt have a wireless adapter, or the

setup software is unable to control it, you may be asked to
connect your computer to the Router with a network cable.

7
Getting Started

Advanced Tools & Settings

After the initial setup is complete, you have the option to

change settings like your network name, security type, and
password. To make these changes and others, click on the
Advanced Tools icon at the CD Setup menu and select one
of the following settings that you would like to change:

Network Name & Security Personalize your network name

(SSID), password, and strength of wireless security.

Internet Service Provider & Login Settings Have

you moved or changed Internet Service Providers?
If youd like to change these settings without running
through the setup process again, this is the place.

8
Getting Started

The Belkin Router Manager

Router Settings
User Manual
The Belkin Router Manager appears in your system tray
(Windows) or menu bar (Mac). Its icon indicates the current Network problem detected
status of your Router and also allows you to access your
Routers settings to make changes. It also provides quick
Networked USB Devices
access to software that came bundled with your Router.
Backup your files and folders
To access the Router settings, click on the icon
and select from the menu that appears. Video Mover

The status of your Router is shown by the Belkin Router Manager Check for Updates
icon, which closely mimics the light on the front of the Router. Options
Blue: You are connected to your Belkin Router Exit
and it is connected to the Internet.
Amber: You are connected to your Belkin Router,
but it is not connected to the Internet.

9
Getting Started

Adding Computers to Your Network Using the CD

1. Put the Setup CD into your computer. If the CD

Wireless devices such as computers, network printers, and gaming doesnt open automatically, browse to your CD
systems can connect to your Router with a few simple steps. drive and open the Belkin Setup CD icon.

2. Click the Setup icon on the CD menu.

3. After a brief installation, the setup software will ask you for the
network name and password from the network information card
that came with your Router. This card is most likely now located
underneath the foot of your Router in the provided card slot.

4. A progress screen will appear while additional software is

installed. This may take a few minutes to complete. Once
finished, a Success message will appear indicating that you
are connected to the Internet via your new Belkin Router.

Note: The setup software runs only on

Windows and Mac OS X systems.

10
Getting Started

Manual Setup
able baker
If you know what sort of Internet service you have, belkin.###
you might try a manual setup. For this you will need a
Wi-Fi-enabled smartphone, tablet, or computer. zebranet

Connect to Your Router When requested, please enter the password

(security key) provided on the card.
Retrieve the network ID card from the foot of your new Belkin Router.
Take a moment to look at the light on the front of
the Router. If it is solid blue, your Router was able
to connect to the Internet automatically.

Cant find the card? The default network name and

password are also printed on the foot of the Router.
If not, please proceed to Manually Set Up
Use your computer, tablet, or smartphone to connect to Your Internet Connection on page 13.
the wireless network shown on the network ID card.

11
Getting Started

Using the WPS Button

1. Start WPS Push Button Connection (WPS PBC) on your

computer or other Wi-Fi device that you would like to connect
wirelessly to your Router. Often there will be a button for this
purpose in software that came with the device, or a physical
WPS, PBC, or Security button on the device itself.

2. Within two minutes, press the WPS button on your Router.

The WPS light (small light above WPS button) will blink blue while it
listens for your Wi-Fi device. Once a connection is established, the
light will turn blue and then go out. If a connection is not established,
the light will blink amber. You may repeat the process to try again.

You can repeat this process for each WPS-enabled

device youd like to add to your network.

12
Getting Started

http://router/
Internet Status: Connected

Manually Set Up Your Internet Connection The status of your Internet connection is shown in the
upper right corner of the router homepage.
Use a browser to visit http://router/. The router homepage
should appear. If after a few moments it says Connected,
youre done! You can surf the Internet.

You can also try visiting http://192.168.2.1/.

13
Getting Started

Internet Status: Not Connected

g
DHCP Client List
Static Route

Internet WAN
Connection Type
DNS
MAC Address

Wireless
Channel and SSID

If not, select Connection Type from the menu on the left. If a password screen appears, press Submit.

14
Getting Started

Dynamic Connection

Cable and fiber customers generally require a dynamic connection. A service name is generally not required. Hit
Some DSL customers require a PPPoE connection. Lets try dynamic Apply Changes. The Router will restart.
first. Select Dynamic from the menu that appears and press Next.

15
Getting Started

Internet Status: Connected

If after a few minutes your Internet Status says PPPoE Connection

Connected, youre done! You can surf the Internet.
Some DSL customers require a PPPoE connection.
Select PPPoE this time and press Next.

If these steps do not work, try restarting your

modem and repeating the process.

If not, well try a PPPoE connection next.

16
Getting Started

Internet Status: Connected

Enter the username and password supplied by your If after a few minutes your Internet Status says
Internet provider and click Apply Changes. Ignore Connected, youre done! You can surf the Internet.
the other fields. The Router will restart.

If these steps do not work, try restarting your

modem and repeating the process.

17
Getting Started

Connecting Additional Devices Android

(phones and tablets)

iOS
1. Open the Settings app and select Wireless and Network.
(iPhone, iPad, and iPod touch)
2. From there, select Wi-Fi to see the list of available networks.
1. Open the Settings app and select the Wi-Fi menu item.
3. Select your wireless network from the list. If asked
2. Select your wireless network from the list that appears to do so, enter your network password.
there. If asked to do so, enter the network password.

Mac OS X
Your Mac provides a menu of available wireless networks
at the right end of the menu bar.
1. Click on the icon showing wireless waves.
2. Select your wireless network from the list that appears
there. If asked to do so, enter the network password.

18
Getting Started

Windows 7

Your computer provides a menu of available wireless

networks at the right end of the task bar.

1. Right-click on the icon that looks like signal strength bars.

2. Select your wireless network from the list. If asked,

enter your network password (network key).

Windows Vista and Windows XP

Your device provides a menu of available wireless
networks at the right end of the task bar.

1. Right-click on the icon that shows a computer with wireless

waves (XP) or two computers (Windows Vista).

2. Choose View Available Wireless Networks (XP) or

Connect to a network (Vista) from the menu.

3. Select your wireless network from the list. If asked,

enter your network password (network key).

19
Getting to Know Your Router

Front Panel

B) W i-Fi Protected Setup (WPS) Light and Button

A
The WPS button on the front of your Router can be used to
help establish a secure connection between your Router and
other WPS-enabled Wi-Fi devices such as computers. To use
the WPS feature on your Router, see Getting Started > Adding
Computers to Your Network > Using the WPS Button.
B The small light near the WPS button shows what is happening
while you are using WPS to establish a connection.

Off: Idle

Blinking Blue: The Router is listening for a WPS-

enabled computer or other device.

A) Router Status Light Solid Blue: The Router has made a secure
connection with the computer or other device.
Your Routers status is shown by the light on the front.
Amber: A connection was not created.
Off: The Router is not plugged into a power source.

Blinking Blue: The Router is starting up.

Solid Blue: The Router is connected to the Internet.

Solid Amber: The Router is connected to the

modem but is not connected to the Internet.

Blinking Amber: The Router cant detect the modem. Either the
modem is off, is not plugged into the Router, or is unresponsive.

20
Getting to Know Your Router

Back Panel

A) Modem (WAN) Connector C) Reset Button D) Power Connector

Connect your modem to this This button is used to restart Connect the included power
port using an Ethernet cable. your Router in rare cases when it supply to this jack.
functions incorrectly. Resetting

A the Router will preserve your

settings. This button may also
be used to restore the factory
B) Wired (LAN) Connectors default settings. Please see
the Troubleshooting section
B Connect computers and other
wired network devices to these
for more information.

ports using Ethernet cables.

C
D

21
Technical Details

Technical Features Web-Based Advanced User Interface

You can easily make changes to your Routers advanced
settings through your web browser. These changes can
be made from any computer on your network.
Integrated 802.11n Wireless Access Point
Utilizing MIMO (Multiple Input Multiple Output) smart-
antenna technology, your Router can reach data transfer Belkin Router Monitor
speeds of up to 300Mbps across your network. The Belkin Router Monitor application helps you to monitor
your Routers status and change network settings.

NAT IP Address Sharing

To save you the cost of adding IP addresses per Integrated 4-Port 10/100 Switch
computer in your house, your Belkin Router uses Network Your Router has a built-in, 4-port network switch to
Address Translation (NAT) technology, allowing you to allow your wired computers to share: printers, data,
share a single IP address across your network. MP3 files, digital photos, and much more.

SPI Firewall
Your Router is equipped with a firewall that will protect your
network from a wide array of common attacks and viruses.

22
Technical Details

System Requirements Setup Software

A computer running Windows XP SP3 or higher,

Router Windows Vista, or Windows 7; or Mac OS X v10.5 or above

Broadband Internet connection such as a cable or Minimum 1GHz processor and 512MB RAM
DSL modem with RJ45 (Ethernet) connection
600MB of free hard-drive space for installation
At least one computer with an installed network interface adapter

TCP/IP networking protocol installed on each computer

RJ45 Ethernet networking cable

Internet browser

23
USING YOUR ROUTER

Enabling Auto Update on Your Belkin Router

The Router has the capability to automatically check

for a newer version of firmware and alert you when its
available. You can choose to download the new version or
ignore it. By default this feature is disabled. If you want to
enable it, select Enable and click Apply Changes. 3. Click Login in the upper right-hand corner of the page. The
Router does not ship with a password, so just click Submit.
Note: We recommend you use a computer that
has a wired connection to the Router.

Setup steps:

1. Open a web browser on the computer.

2. In the address bar of the web browser, type http://192.168.2.1.

24
using your router

5. Toward the lower-half side of the screen you will
find Auto Update Firmware Enabling.

6. Select Enable by clicking the radio button and then

click Apply Changes at the bottom of the screen.
4. Click on System Settings in the left-hand
column under the Utilities heading.

25
using your router

Updating Your Router via Your System

Tray (Windows) or Menu Bar (Mac)

Once you have completed the setup process, you will need
to update the new software for your Router. This can be done
easily via your computers system tray or menu bar.

Setup steps:

1. Click on the blue Belkin Router Manager icon (right-click for

Windows) in your system tray (Windows) or menu bar (Mac).

2. Select Check for Updates or Update Available from the menu.

3. You should now see the Belkin Updater window.

4. Click on the Install Update icon.

26
using your router

Updating the Routers Firmware

via the Web Interface

The following steps show you how to update your Routers

firmware using its web interface. You do not need to be connected
to the Internet as this interface is built into the Router itself.

Setup steps:

1. Locate and download the firmware file from the Belkin

support site. (Type your part number into the search box in
the top right corner and look for Firmware in the title.)

2. Save the file to a location on your computer where

you can get to it easily, such as your desktop.

3. Connect the computer to one of the four LAN ports on the Router.

27
using your router

4. Open a web browser on the computer.

5. In the address bar of the web browser, type

http://192.168.2.1 and press Enter on your keyboard.

6. Click Login in the upper right-hand corner of the page. The

Router does not ship with a password, so just click Submit.

7. Click on Firmware Update toward the

bottom of the left-hand menu.

28
using your router

9. Select the firmware file by left-clicking on it and then click

the Open button in the lower-right corner of the window.
This will take you back into the Routers interface.
8. Click the Browse button toward the middle of the
screen to search for the file you saved previously.

Note: The firmware version in the images above is

depicted as an example. Your file name will vary
depending on your model and version.

29
using your router

11. A prompt asking, Are you sure you want to continue

with upgrading? will appear. Click OK.

12. A second prompt will open telling you the Router will not
respond during the upgrade and warning you not to remove
the power supply from the Router. Click OK once more.

Congratulations. The firmware has been updated successfully.

10. C lick the Update button.

30
using your router

Resetting the Router Restoring Your Router to Factory Defaults

Press and hold the Reset button for at least 10 seconds,

Reset Button Red and then release it. The lights on the Router will momentarily
flash. The Router light will begin to blink. When the Router
The Reset button is used in rare cases when the Router light becomes solid again, the restore is complete.
may function improperly. Resetting the Router will restore the
Routers normal operation while maintaining the programmed
settings. You can also restore the factory default settings by
using the Reset button. Use the restore option in instances
where you may have forgotten your custom password.

Resetting the Router

Push and release the Reset button. The lights on the Router will
momentarily flash. The Router light will begin to blink. When
the Router light becomes solid again, the reset is complete.

31
using your router

Restoring the Router to Default

Settings Using the Web Interface

Symptoms

You need to restore the factory defaults using the web interface.
This may be because the Router is not performing as expected
or you wish to remove all previously configured settings.

Setup steps

1. Open a web browser on the computer.

2. In the address bar of the web browser, type http://192.168.2.1.

3. Click Login in the upper right-hand corner of the page. The

Router does not ship with a password, so just click Submit.

32
using your router

4. Click on Restore Factory Defaults in the left- 5. Click on the Restore Defaults button.
hand column under the Utilities heading.

33
using your router

7. The Router will begin the restoring process. Once

the restore is complete, the Router will reboot.

Note: This may take several minutes.

Your Router has successfully been restored to its factory settings.

6. A warning box will open that says, Warning: All your settings
will be lost. Are you sure you want to do this? Click OK.

34
Troubleshooting, Support, and Warranty

Troubleshooting Belkin Setup cannot find my Router.

If Belkin Setup is not able to communicate with your Router during

the installation process, please check the following items.
The Setup does not automatically start.
1. Make sure that the wireless hardware on your
If Belkin Setup does not run when you insert the CD-ROM, your computer is turned on, if available.
computer may not be configured to open CDs automatically.
2. Try connecting your computer to one of the four wired
If Belkin Setup does not appear within 15 seconds, browse ports on the Router with an Ethernet cable.
to your CD-ROM drive and open the Belkin Setup icon.
Alternatively, you may visit http://router/ and perform the 3. Ensure that the Router is on. The front-panel light should be on.
setup manually. Please see Manual Setup Using Your
Browser earlier in this manual for more information. 4. Unplug the Routers power supply for 10
seconds, then plug it back in.

5. There may be firewall software on your computer preventing

an outgoing connection. You may choose to temporarily
disable this software before attempting setup.

If Belkin Setup still cannot find the Router, you might choose
to do a manual setup. Refer to Manually Configuring
Network Settings in this manual for details.

35
Troubleshooting, Support, and Warranty

Belkin Setup cannot connect my Router to the Internet. Belkin Setup completed installation, but I cannot browse the
Web. The light on the front of my Router is blinking amber.
If Belkin Setup is not able to connect the Router to
the Internet, please check the following items: 1. Make sure the Router is connected to your modem with an
Ethernet cable via the Routers one WAN (modem) port.
1. Use the troubleshooting suggestions within Belkin Setup.
2. Unplug the modem from its power source and make sure
2. If your ISP requires a user name and password, make sure that that it goes dark. Then reapply power to the modem.
you have typed in your user name and password correctly. Some
user names require that the ISPs domain may be at the end of the 3. Unplug your Routers power supply, wait 10 seconds,
name. Example: myname@myisp.com. The @myisp.com part of and plug it back in. This will cause the Router to try
the user name may need to be typed as well as your user name. to reestablish communication with the modem.

3. If you continue to have no Internet connection, refer

to Manually Configuring Network Settings in this
manual for an alternative setup method.

36
Troubleshooting, Support, and Warranty

Belkin Setup completed installation, but I cannot browse the I cant connect to the Internet wirelessly.
Web. The light on the front of my Router is solid amber.
If the light on the front of the Router is solid blue, then your
1. Use the troubleshooting suggestions within Belkin Setup. Router is connected to the Internet. You may not be connected
to the Routers wireless network. Please refer to Adding
2. If your ISP requires a user name and password, make sure that Computers to Your Network in this manual for instructions.
you have typed in your user name and password correctly. Some
user names require that the ISPs domain may be at the end of the If your Windows XP computer is running SP2, you will
name. Example: myname@myisp.com. The @myisp.com part of not be able to set up the Router via the wireless setup
the user name may need to be typed as well as your user name. process. You will need to either update to Windows XP
SP3 or complete the setup via a wired connection.
3. If you have a static connection, your ISP will have
assigned you an IP address, subnet mask, and gateway
address. Please re-run Belkin Setup and enter this
information when a static connection is mentioned.

4. You may need to configure your Router to meet

the specific requirements of your ISP. To search
our knowledge base for ISP-specific issues, go to:
http://www.belkin.com/support and type in ISP.

5. If you continue to have no Internet connection, refer

to Manually Configuring Network Settings in this
manual for an alternative setup method.

37
Troubleshooting, Support, and Warranty

I cant connect to the Internet wirelessly and my My wireless network per formance is slow, inconsistent,
network name is not listed in Available Networks. suffers from weak signal, or Im having difficulty maintaining a
VPNconnection.
1. Verify that your Router is on and the
front-panel light shows solid blue. Wireless technology is radio-based, which means connectivity
and the throughput performance between devices
2. If you are far from the Router, you might try moving decreases when the distance between devices increases.
closer to see if you might have been out of range. Other factors that will cause signal degradation (metal is
generally the worst culprit) are obstructions such as walls
3. Using a computer attached to the Router via a network cable, and metal appliances. Note also that connection speed may
visit http://router/ and ensure that Broadcast SSID is ON. decrease as you move farther away from the Router.
This setting is found on the Channel and SSID page.
In order to determine if wireless issues are related to
range, we suggest temporarily moving the computer
within 10 feet from the Router if possible.

Changing the wireless channelDepending on local

wireless traffic and interference, switching the wireless
channel of your network can improve performance and
reliability. See the section titled Changing the Wireless
Channel for instructions on how to choose other channels.

38
Troubleshooting, Support, and Warranty

Limiting the wireless transmit rateLimiting the wireless transmit Ive installed this new Router and some of my network clients
rate can help improve range and connection stability. Most wireless (computers, game consoles, etc.) are now unable to connect.
cards have the ability to limit the transmission rate. To change this
property in Windows, go to the Windows Control Panel, open Network Your new Router came pre-configured with a network name and
Connections, and double-click on your wireless cards connection. In password, found printed on an attached card. All clients must use this
the properties dialog, select the Configure button on the General network name and password to connect wirelessly to your Router.
tab, then choose the Advanced tab and select the rate property. You will need to find the network settings on your client, select the
network name printed on the card from the list of available networks,
Wireless client cards are usually set to automatically adjust and enter the password when prompted to join the wireless network.
the wireless transmit rate for you, but doing so can cause
periodic disconnects when the wireless signal is too weak; as
a rule, slower transmission rates are more stable. Experiment
with different connection rates until you find the best one
for your environment. Note that all available transmission
rates should be acceptable for browsing the Internet. For
more assistance, see your wireless cards user manual.

39
Troubleshooting, Support, and Warranty

Does the Router support Wireless 5. Click Apply Changes to finish. Your wireless
Protected Access (WPA) security? connection is now encrypted. Each computer using your
wireless network will need to use the new key.
The Router ships with WPA/WPA2 security turned on.
Windows XP and some older network hardware may Note: If you are configuring the Router over a wireless
require a software update to support WPA/WPA2. connection, you will have to re-connect to the
Router after changing any security settings.

I am having difficulty setting up WPA security on my Router. Note: Some older networking hardware supports
only WEP encryption. If your older computers cannot
1. Log in to your Router by visiting http://router/ with your web browser. connect to your network, try 128-bit or 64-bit WEP, or
Click on the Login button in the top right-hand corner of the seek software updates from their manufacturers.
screen. You will be asked to enter your password. If you have never
set a password, leave the Password field blank and click Submit.

2. Click Wireless in the left-hand menu. Then

click Security just below that.

3. Select the WPA/WPA2 option.

4. Enter a password. This can be from 863 characters of your choice,

including spaces and punctuation, OR a 64-digit hexadecimal
number (using only the numbers 09 and letters AF).

40
Troubleshooting, Support, and Warranty

I am having difficulty setting up Wired Equivalent 5. Click Apply Changes to finish. Your wireless
Privacy (WEP) security on my Router. activity is now encrypted. Each computer using your
wireless network will need to use the new key.
1. Log in to your Router. Visit http://router/ with your web browser.
Click on the Login button in the top right-hand corner of the Note: If you are configuring the Router over a wireless
screen. You will be asked to enter your password. If you have never connection, you will have to re-connect to the
set a password, leave the Password field blank and click Submit. Router after changing any security settings.

2. Click Wireless in the left-hand menu. Then Note: Some older networking hardware supports
click Security just below that. only 64-bit WEP encryption. If your older computers
cannot connect to your network, try 64-bit WEP.
3. Select the 128-bit WEP option.

4. You may type in a WEP key manually, or generate one from

a passphrase. Type a phrase in the Passphrase field and
click the Generate button. A WEP key is composed of 26
hexadecimal digits (09, AF.. For example, C3 03 0F AF
4B B2 C3 D4 4B C3 D4 EE 74 is a valid 128-bit WEP key.

41
Troubleshooting, Support, and Warranty

Technical Support

US
http://www.belkin.com/support

UK
http://www.belkin.com/uk/support

Australia
http://www.belkin.com/au/support

New Zealand
http://www.belkin.com/au/support

Singapore
1800 622 1130

Europe
http://www.belkin.com/uk/support

42
Troubleshooting, Support, and Warranty

Belkin International, Inc., Limited What is not covered by this warranty?

2-Year Product Warranty All above warranties are null and void if the Belkin product is
not provided to Belkin for inspection upon Belkins request
at the sole expense of the purchaser, or if Belkin determines
What this warranty covers. that the Belkin product has been improperly installed, altered
Belkin International, Inc. (Belkin) warrants to the original in any way, or tampered with. The Belkin Product Warranty
purchaser of this Belkin product that the product shall be free does not protect against acts of God such as flood, lightning,
of defects in design, assembly, material, or workmanship. earthquake, war, vandalism, theft, normal-use wear and tear,
erosion, depletion, obsolescence, abuse, damage due to low
voltage disturbances (i.e. brownouts or sags), non-authorized
What the period of coverage is. program, or system equipment modification or alteration.
Belkin warrants the Belkin product for two years.

What will we do to correct problems?

Product Warranty.
Belkin will repair or replace, at its option, any defective product
free of charge (except for shipping charges for the product).
Belkin reserves the right to discontinue any of its products without
notice, and disclaims any limited warranty to repair or replace any
such discontinued products. In the event that Belkin is unable to
repair or replace the product (for example, because it has been
discontinued), Belkin will offer either a refund or a credit toward
the purchase of another product from Belkin.com in an amount
equal to the purchase price of the product as evidenced on the
original purchase receipt as discounted by its natural use.

43
Troubleshooting, Support, and Warranty

How to get service. Belkin reserves the right to review the damaged Belkin product.
To get service for your Belkin product you All costs of shipping the Belkin product to Belkin for inspection
must take the following steps: shall be borne solely by the purchaser. If Belkin determines,
in its sole discretion, that it is impractical to ship the damaged
1. Contact Belkin International, Inc., at 12045 E. Waterfront equipment to Belkin, Belkin may designate, in its sole discretion,
Drive, Playa Vista, CA 90094, Attn: Customer Service, or an equipment repair facility to inspect and estimate the cost to
call (800)-223-5546, within 15 days of the Occurrence. repair such equipment. The cost, if any, of shipping the equipment
Be prepared to provide the following information: to and from such repair facility and of such estimate shall be
borne solely by the purchaser. Damaged equipment must remain
a. T he part number of the Belkin product.
available for inspection until the claim is finalized. Whenever
b. W here you purchased the product. claims are settled, Belkin reserves the right to be subrogated
c. W hen you purchased the product. under any existing insurance policies the purchaser may have.
d. C opy of original receipt.

2. Your Belkin Customer Service Representative will then

instruct you on how to forward your receipt and Belkin
product and how to proceed with your claim.

44
Troubleshooting, Support, and Warranty

How state law relates to the warranty.

THIS WARRANTY CONTAINS THE SOLE WARRANTY OF
BELKIN. THERE ARE NO OTHER WARRANTIES, EXPRESSED
OR, EXCEPT AS REQUIRED BY LAW, IMPLIED, INCLUDING
THE IMPLIED WARRANTY OR CONDITION OF QUALITY,
MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE, AND SUCH IMPLIED WARRANTIES, IF ANY, ARE
LIMITED IN DURATION TO THE TERM OF THIS WARRANTY.

Some states do not allow limitations on how long an implied

warranty lasts, so the above limitations may not apply to you.

IN NO EVENT SHALL BELKIN BE LIABLE FOR INCIDENTAL,

SPECIAL, DIRECT, INDIRECT, CONSEQUENTIAL OR
MULTIPLE DAMAGES SUCH AS, BUT NOT LIMITED TO,
LOST BUSINESS OR PROFITS ARISING OUT OF THE
SALE OR USE OF ANY BELKIN PRODUCT, EVEN IF
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

This warranty gives you specific legal rights, and you may also have
other rights, which may vary from state to state. Some states do
not allow the exclusion or limitation of incidental, consequential,
or other damages, so the above limitations may not apply to you.

45
Regulatory Information

FCC Statement Federal Communications Commission Notice

This equipment has been tested and found to comply with the
DECLARATION OF CONFORMITY WITH FCC RULES limits for a Class B digital device, pursuant to Part 15 of the FCC
FOR ELECTROMAGNETIC COMPATIBILITY Rules. These limits are designed to provide reasonable protection
We, Belkin International, Inc., of 12045 E. Waterfront Drive, Playa against harmful interference in a residential installation.
Vista, CA 90094, declare under our sole responsibility that the device,
F9K1002 V4, complies with Part 15 of the FCC Rules. Operation is This equipment generates, uses, and can radiate radio frequency
subject to the following two conditions: (1) this device may not cause energy, and if not installed and used in accordance with the
harmful interference, and (2) this device must accept any interference instructions, may cause harmful interference to radio communications.
received, including interference that may cause undesired operation. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined
Caution: Exposure to Radio Frequency Radiation. by turning the equipment off and on, the user is encouraged to try and
correct the interference by one or more of the following measures:
The device shall be used in such a manner that the potential
for human contact normal operation is minimized. Reorient or relocate the receiving antenna.
This equipment complies with FCC radiation exposure Increase the distance between the equipment and the receiver.
limits set forth for an uncontrolled environment. This C onnect the equipment to an outlet on a circuit different
equipment should be installed and operated with a minimum from that to which the receiver is connected.
distance of 20cm between the radiator and your body. Consult the dealer or an experienced radio/TV technician for help.

 CC Caution: Any changes or modifications not expressly

F
approved by the party responsible for compliance could
void the users authority to operate this equipment.

This device and its antenna(s) must not be co-located or

operating in conjunction with any other antenna or transmitter.

46
Regulatory Information

Canada-Industry Canada (IC)

The wireless radio of this device complies with RSS
139 & RSS 210 Industry Canada. This Class B digital
apparatus complies with Canadian ICES-003.

Operation is subject to the following two conditions: (1)

this device may not cause interference, and (2) this device
must accept any interference, including interference
that may cause undesired operation of the device.

Cet appareil numrique de la classe B conforme

la norme NMB-003 du Canada.

47
 2012 Belkin International, Inc. All rights reserved. All trade names are registered trademarks
of respective manufacturers listed. Mac and Mac OS are trademarks of Apple Inc., registered
in the U.S. and other countries. Windows and Windows Vista are either registered trademarks
or trademarks of Microsoft Corporation in the United States and/or other countries.