MF-614

METRIC
FASTENERS
 2
INDEX

Metric Fasteners Page

Standard Metric Hex Bolts........................................... 3

Clamshell Packs........................................................... 5
Nuts.............................................................................. 6
Washers........................................................................ 7
Flange Bolts.................................................................. 9
Bumper Bar Bolts......................................................... 9
Flange Nuts.................................................................. 10
Screws.......................................................................... 11
Body Shop Fasteners................................................... 12
Rods & Pins.................................................................. 16
18.8 Stainless Steel...................................................... 17
Assortments................................................................. 19
Merchandisers.............................................................. 24
Handy-Paks................................................................ 26

Please visit our website for a more extensive listing of

Metric Drain Plugs & Gaskets, Wheel Parts & Body Shop Fasteners.
www.hpaulin.com

H. Paulin & Co., a division of The Hillman Group Canada ULC

 3

8.8 METRIC HEX HEAD CAP SCREWS

BOLTS
H L
BOULONS DE PRCISION MTRIQUE 8,8
n High tensile screws made to ISO-Metric specifications.
608 n Property Class: 8.8 (nominal tensile strength 800 MPa
W D

Series or about 118,000 p.s.i., similar to S.A.E. Grade 5.)

P
n Heat Treated Steel, Zinc Chromate plated
n Regular ISO Coarse Thread Series
ORDER BY STOCK NUMBER
Dia.(D) M4 M5 M6 M8 M10 M12 M14 M16 M18 M20 M24
Inch Size .157 .197 .236 .315 .394 .472 .551 .630 .709 .787 .944
A.F. (W) 7 8 10 13 17 19 22 24 27 30 36
Height. (H) 2.8 3.5 4.0 5.5 7.0 8.0 9.0 10.0 12.0 13.0 15.0
Pitch (mm) .70 .80 1.00 1.25 1.50 1.75 2.00 2.00 2.50 2.50 3.00
Length
12 mm - 608-198 * 608-267 * 608-311 * - - - - - - -
16 mm 608-139 * 608-201 * 608-270 * 608-314 * 608-364 * - - - - - -
20 mm 608-141 * 608-203 * 608-272 * 608-316 * 608-366 * - - - - - -
25 mm 608-143 * 608-205 * 608-274 * 608-318 * 608-368 * 608-412 * 608-436 * 608-462 * - - -
30 mm - - 608-276 608-320 * 608-370 * 608-414 * 608-438 * 608-464 * - - -
35 mm - - 608-277 608-321 608-371 * 608-415 * - 608-465 * - - -
40 mm - - 608-278 608-322 608-372 608-416 * 608-440 * 608-466 * 608-500 * 608-520 * -
45 mm - - 608-279 608-323 608-373 608-417 - 608-467* - - -
50 mm - - 608-280 608-324 608-374 608-418 608-442 608-468* 608-502 * 608-522 * 608-552 *
60 mm - - 608-283 608-326 608-376 608-420 608-444 608-470 608-504 608-524 * 608-554 *
70 mm - - 608-285 608-328 608-378 608-422 608-446 608-472 608-506 608-526 608-556 *
80 mm - - 608-287 608-330 608-380 608-424 608-448 608-474 608-508 608-528 608-558
90 mm - - - - - 608-425 608-449 608-475 608-509 608-529 608-559
100 mm - - - - 608-382 608-426 608-450 608-476 608-510 608-530 608-560
110 mm - - - - - 608-427 608-451 608-477 608-511 608-531 608-561
120 mm - - - - - 608-428 608-452 608-478 608-512 608-532 608-562
130 mm - - - - - 608-429 - 608-479 608-513 608-533 608-563
140 mm - - - - - 608-430 - 608-480 608-514 608-534 608-564
150 mm - - - - - 608-431 - 608-481 608-515 608-535 608-565
160 mm - - - - - 608-432 - 608-482 - 608-536 608-566
170 mm - - - - - 608-433 - - - 608-537 -
180 mm - - - - - 608-434 - - - 608-538 608-568
190 mm - - - - - - - - - 608-539 -
200 mm - - - - - 608-435 - - - 608-540 -
This item is also available in clamshell clear pack. See page 5. Standard packages: M4 to M10 - 100 pcs, M12 - 50 pcs,
* Indicates items fully threaded. Thread Length Formula is 2d+6 mm. M14 to M24 x 80 - 25 pcs, M24 x 90 to 180 mm - 10 pcs.

8.8 METRIC HEX HEAD CAP SCREWS FINE AND EXTRA FINE THREAD
BOULONS DE PRCISION MTRIQUE 8,8 FIL FIN ET PLUS FIN
n High tensile screws made to ISO-Metric specifications.
609 610 n Property Class: 8.8 (normal tensile strength 800 MPa or
Series Series about 118,000 p.s.i.) similar to S.A.E. Grade 5
n Heat Treated Steel, Dichromate plated
ORDER BY STOCK NUMBER
Dia. x Pitch M8 x 1.0 M10 x 1.25 M12 x 1.5 M14 x 1.5 M16 x 1.5 M18 x 1.5 M20 x 1.5 M10 x 1.0 M12 x 1.25
Length Fine Thread X-Fine Thread
20 mm 609-316 * 609-366 * - - - - - 610-366 * -
25 mm - 609-368 * - 609-436 * - - - 610-368 * -
30 mm 609-320 * 609-370 * 609-414 * 609-438 * 609-464 * - - 610-370 * 610-414 *
40 mm 609-322 * 609-372 * 609-416 * 609-440 * 609-466 * 609-500 * 609-520 * 610-372 * 610-416 *
45 mm - - 609-417 * 609-441 * - - - - -
50 mm 609-324 * 609-374 * 609-418 * 609-442 609-468 * 609-502 * 609-522 * 610-374 * 610-418 *
55 mm - - 609-419 - - - - - -
60 mm - 609-376 609-420 609-444 609-470 609-504 609-524 * - -
65 mm - - 609-421 - - - - - -
70 mm - 609-378 609-422 609-446 609-472 609-506 609-526 - -
80 mm - 609-380 609-424 609-448 609-474 609-508 609-528 - -
90 mm - 609-382 609-425 - 609-475 609-509 609-529 - -
100 mm - 609-384 609-426 - 609-476 - 609-530 - -
110 mm - - - - 609-477 - 609-532 - -
This item is also available in clamshell clear pack. See page 5. Standard packages: Fine Thread M8 to M10 x 60 - 50 pcs,
* Indicates items fully threaded. Thread Length Formula is 2d+6 mm. M10 x 70 to M18 x 90 - 25 pcs, M20 - 10 pcs. Extra Fine Thread - 25 pcs.

1.800.268.4000 www.hpaulin.com
 4

10.9 METRIC HEX HEAD CAP SCREWS H L

BOLTS

BOULONS DE PRCISION MTRIQUE 10,9

n High Tensile Screws made to ISO-Metric Specifications. W D
613 n Property Class: Grade 10.9 (minimum tensile strength 1040 MPa
Plated or about 150,000 p.s.i., similar to SAE Grade 8) P
n Heat Treated Steel
n Regular ISO Coarse Thread Series
ORDER BY STOCK NUMBER
Dia.(D) M4 M5 M6 M8 M10 M12 M14 M16 M18 M20 M24
Inch Size .157 .197 .236 .315 .394 .472 .551 .630 .709 .787 .944
A.F. (W) 7 8 10 13 17 19 22 24 27 30 36
Height. (H) 2.8 3.5 4.0 5.5 7.0 8.0 9.0 10.0 12.0 13.0 15.0
Pitch (mm) .70 .80 1.00 1.25 1.50 1.75 2.00 2.00 2.50 2.50 3.00
Length
12 mm - 613-198 * 613-267 * 613-311 * - - - - - - -
16 mm 613-139 * 613-201 * 613-270 * 613-314 * 613-364 * - - - - - -
20 mm 613-141 * 613-203 * 613-272 * 613-316 * 613-366 * - - - - - -
25 mm 613-143 * 613-205 * 613-274 * 613-318 * 613-368 * 613-412 * 613-436 * 613-462 * - - -
30 mm - - 613-276 613-320 * 613-370 * 613-414 * 613-438 * 613-464 * - - -
35 mm - - 613-277 613-321 613-371 * 613-415 * - 613-465 * - - -
40 mm - - 613-278 613-322 613-372 613-416 * 613-440 * 613-466 * 613-500 * 613-520 * -
45 mm - - 613-279 613-323 613-373 613-417 - 613-467* - - -
50 mm - - 613-280 613-324 613-374 613-418 613-442 613-468* 613-502 * 613-522 * 613-552 *
60 mm - - 613-283 613-326 613-376 613-420 613-444 613-470 613-504 613-524 * 613-554 *
70 mm - - 613-285 613-328 613-378 613-422 613-446 613-472 613-506 613-526 613-556 *
80 mm - - 613-287 613-330 613-380 613-424 613-448 613-474 613-508 613-528 613-558
90 mm - - - - - 613-425 613-449 613-475 613-509 613-529 613-559
100 mm - - - - 613-382 613-426 613-450 613-476 613-510 613-530 613-560
110 mm - - - - - 613-427 613-451 613-477 613-511 613-531 613-561
120 mm - - - - - 613-428 613-452 613-478 613-512 613-532 613-562
130 mm - - - - - 613-429 - 613-479 613-513 613-533 613-563
140 mm - - - - - 613-430 - 613-480 613-514 613-534 613-564
150 mm - - - - - 613-431 - 613-481 613-515 613-535 613-565
160 mm - - - - - 613-432 - 613-482 - 613-536 613-566
170 mm - - - - - 613-433 - - - 613-537 -
180 mm - - - - - 613-434 - - - 613-538 613-568
200 mm - - - - - 613-435 - - - 613-540 -
This item is also available in clamshell clear pack. See page 5. Standard packages: M4 to M10 - 100 pcs, M12 - 50 pcs,
* Indicates items fully threaded. Thread Length Formula is 2d+6 mm. M14 to M24 x 80 - 25 pcs, M24 x 90 to 180 mm - 10 pcs.

615 622 623

Series Series Series
CLASS 8.8 YELLOW ZINC HEX CAP W/ CAPTIVE WASHER CLASS 12.9 SOCKET HEX CAP SCREW CLASS 12.9 FLAT SOCKET CAP SCREW
Part No. Dia. x Length Pkg Qty A/F Part No. Dia. x Length Pkg Qty Hex Size Part No. Dia. x Length Pkg Qty Hex Size
615-460 M5 - 0.8 x 25 40 8 622-126 M3 - .50 x 12 100 2.5 623-141 M4 - .70 x 20 100 2.5
615-462 M5 - 0.8 x 30 40 8 622-136 M4 - .70 x 12 100 3 623-205 M5 - .80 x 25 100 3
615-466 M5 - 0.8 x 40 40 8 622-198 M5 - .80 x 12 100 4 623-267 M6 - 1.0 x 12 100 4
615-512 M6 - 1.0 x 30 20 10 622-205 M5 - .80 x 25 100 4 623-277 M6 - 1.0 x 35 100 4
615-514 M6 - 1.0 x 35 20 10 622-266 M6 - 1.0 x 10 100 5 623-318 M8 - 1.25 x 25 100 5
615-518 M6 - 1.2 x 45 20 10 622-274 M6 - 1.0 x 25 100 5 623-373 M10 - 1.5 x 45 100 6
615-520 M6 - 1.0 x 50 20 10 622-279 M6 - 1.0 x 45 100 5 623-415 M12 - 1.75 x 35 50 8
615-568 M8 - 1.25 x 45 15 13 622-318 M8 - 1.25 x 25 100 6 623-464 M16 - 2.0 x 30 25 10
615-570 M8 - 1.25 x 50 15 13 622-320 M8 - 1.25 x 30 100 6
615-574 M8 - 1.25 x 60 15 13 622-324 M8 - 1.25 x 50 100 6
615-605 M10 - 1.25 x 16 15 15 622-366 M10 - 1.5 x 20 100 8
615-610 M10 - 1.25 x 25 15 15 622-371 M10 - 1.5 x 35 100 8
615-636 M10 - 1.25 x 100 10 15 622-376 M10 - 1.5 x 60 50 8
622-410 M12 - 1.75 x 20 50 10
622-417 M12 - 1.75 x 45 50 10 SOCKET SET SCREW
624 622-436
622-442
M14 - 2.0 x 25
M14 - 2.0 x 50
25
25
12
12
Part No. Dia. x Length Pkg Qty Hex Size
Series 623-108 M2 - .40 x 8 100 0.9
622-465 M16 - 2.0 x 35 25 14 623-116 M2.5 - .45 x 12 100 1.3
BUTTON HEAD CAP SCREW 622-520 M20 - 2.5 x 40 15 17 623-125 M3 - .50 x 10 100 1.5
Part No. Dia. x Length Pkg Qty Hex Size 622-554 M24 - 2.5 x 60 5 19 623-139 M4 - .70 x 16 100 2
624-368 M10 - 1.5 x 25 100 6 623-201 M5 - .80 x 16 100 2.5
624-370 M10 - 1.5 x 30 100 6 623-272 M6 - 1.0 x 20 100 3
624-374 M10 - 1.5 x 50 100 6 623-322 M8 - 1.25 x 40 100 4
624-375 M10 - 1.5 x 55 100 6 623-366 M10 - 1.5 x 20 100 5

H. Paulin & Co., a division of The Hillman Group Canada ULC

 5

CLAMSHELL PACKS

CLAMSHELLS
EMPAQUETAGES

009
Series
ORDER BY STOCK NUMBER
CLASS 8.8 STANDARD METRIC HEX BOLTS
CL Part No. Bulk Part No. Size Pcs per CL Sleeve CL Part No. Bulk Part No. Size Pcs per CL Sleeve
009-221 608-267 M6 - 1.00 x 12 14 4 009-240 608-372 M10 - 1.50 x 40 3 4
009-222 608-270 M6 - 1.00 x 16 12 4 009-241 608-374 M10 - 1.50 x 50 2 4
009-223 608-272 M6 - 1.00 x 20 10 4 009-242 608-376 M10 - 1.50 x 60 2 4
009-224 608-274 M6 - 1.00 x 25 8 4 009-243 608-378 M10 - 1.50 x 70 2 4
009-225 608-276 M6 - 1.00 x 30 7 4 009-244 608-412 M12 - 1.75 x 25 2 4
009-226 608-277 M6 - 1.00 x 35 4 4 009-245 608-415 M12 - 1.75 x 35 2 4
009-227 608-278 M6 - 1.00 x 40 4 4 009-246 608-416 M12 - 1.75 x 40 2 4
009-228 608-314 M8 - 1.25 x 16 10 4 009-247 608-418 M12 - 1.75 x 50 2 4
009-229 608-316 M8 - 1.25 x 20 9 4 009-248 608-420 M12 - 1.75 x 60 2 4
009-230 608-318 M8 - 1.25 x 25 8 4 009-249 608-422 M12 - 1.75 x 70 2 4
009-231 608-320 M8 - 1.25 x 30 7 4 009-156 609-370 M10 - 1.25 x 30 1 4
009-232 608-321 M8 - 1.25 x 35 4 4 009-157 609-372 M10 - 1.25 x 40 1 4
009-233 608-322 M8 - 1.25 x 40 5 4 009-158 609-374 M10 - 1.25 x 50 1 4
009-234 608-323 M8 - 1.25 x 45 5 4 009-159 609-414 M12 - 1.50 x 30 1 4
009-235 608-324 M8 - 1.25 x 50 4 4 009-160 609-416 M12 - 1.50 x 40 1 4
009-236 608-366 M10 - 1.50 x 20 5 4 009-161 609-418 M12 - 1.50 x 50 1 4
009-237 608-368 M10 - 1.50 x 25 4 4 009-162 610-414 M12 - 1.25 x 30 1 4
009-238 608-370 M10 - 1.50 x 30 4 4 009-163 610-416 M12 - 1.25 x 40 1 4
009-239 608-371 M10 - 1.50 x 35 3 4 009-164 610-418 M12 - 1.25 x 50 1 4

CLASS 10.9 STANDARD METRIC HEX BOLTS

CL Part No. Bulk Part No. Size Pcs per CL Sleeve CL Part No. Bulk Part No. Size Pcs per CL Sleeve
009-113 611-267 M6 - 1.00 x 12 4 4 009-008 613-320 M8 - 1.25 x 30 4 4
009-114 611-270 M6 - 1.00 x 16 4 4 009-009 613-321 M8 - 1.25 x 35 3 4
009-115 611-272 M6 - 1.00 x 20 4 4 009-010 613-322 M8 - 1.25 x 40 3 4
009-116 611-276 M6 - 1.00 x 30 4 4 009-011 613-323 M8 - 1.25 x 45 3 4
009-117 611-278 M6 - 1.00 x 40 2 4 009-012 613-324 M8 - 1.25 x 50 3 4
009-118 611-314 M8 - 1.25 x 16 3 4 009-013 613-366 M10 - 1.50 x 20 3 4
009-119 611-316 M8 - 1.25 x 20 3 4 009-014 613-368 M10 - 1.50 x 25 3 4
009-120 611-320 M8 - 1.25 x 30 2 4 009-015 613-370 M10 - 1.50 x 30 3 4
009-121 611-322 M8 - 1.25 x 40 2 4 009-016 613-371 M10 - 1.50 x 35 3 4
009-122 611-364 M10 - 1.25 x 16 2 4 009-017 613-372 M10 - 1.50 x 40 2 4
009-123 611-366 M10 - 1.25 x 20 2 4 009-018 613-374 M10 - 1.50 x 50 2 4
009-124 611-370 M10 - 1.25 x 30 2 4 009-019 613-376 M10 - 1.50 x 60 2 4
009-125 611-372 M10 - 1.25 x 40 2 4 009-020 613-378 M10 - 1.50 x 70 2 4
009-001 613-272 M6 - 1.00 x 20 9 4 009-021 613-414 M12 - 1.75 x 30 2 4
009-002 613-274 M6 - 1.00 x 25 8 4 009-022 613-415 M12 - 1.75 x 35 2 4
009-003 613-276 M6 - 1.00 x 30 7 4 009-023 613-416 M12 - 1.75 x 40 2 4
009-004 613-277 M6 - 1.00 x 35 6 4 009-024 613-418 M12 - 1.75 x 50 2 4
009-005 613-278 M6 - 1.00 x 40 5 4 009-025 613-420 M12 - 1.75 x 60 2 4
009-006 613-316 M8 - 1.25 x 20 5 4 009-026 613-422 M12 - 1.75 x 70 2 3
009-007 613-318 M8 - 1.25 x 25 4 4

CLASS 8.8 HEX NUTS CLASS 10.9 HEX NUTS

CL Part No. Bulk Part No. Size Pcs per CL Sleeve CL Part No. Bulk Part No. Size Pcs per CL Sleeve
009-250 670-006 M6 - 1.00 12 6 009-027 671-006 M6 - 1.00 12 6
009-251 670-008 M8 - 1.25 10 6 009-028 671-008 M8 - 1.25 10 6
009-252 670-010 M10 - 1.50 6 4 009-029 671-010 M10 - 1.50 6 4
009-253 670-012 M12 - 1.75 4 4 009-030 671-012 M12 - 1.75 4 4
009-165 670-210 M10 - 1.25 2 6 CLASS 10.9 FLANGE NUTS
009-166 670-212 M12 - 1.50 2 6 009-126 244-996 M6 - 1.00 4 6
009-167 670-765 M12 - 1.25 2 6 009-127 244-997 M8 - 1.25 4 6
CLASS 8.8 FLAT WASHERS 009-128 244-998 M10 - 1.25 4 6
009-031 730-006 6 mm 16 6 ENGINE STUDS
009-032 730-008 8 mm 12 6 009-329 264-230 M6 - 1.00 x 30 2 6
009-033 730-010 10 mm 8 6 009-330 264-338 M8 - 1.25 x 38 2 6
009-034 730-012 12 mm 6 6 009-331 264-346 M8 - 1.25 x 46 2 6
CLASS 8.8 LOCK WASHERS 009-332 264-348 M8 - 1.25 x 50 2 6
009-035 740-006 6 mm 16 6 009-333 264-451 M10 - 1.50 x 50 2 6
009-036 740-008 8 mm 12 6 009-334 264-453 M10 - 1.50 x 62 2 6
009-037 740-010 10 mm 10 4
009-038 740-012 12 mm 8 4

1.800.268.4000 www.hpaulin.com
 6

NUTS
NUTS & WASHERS

CROUS
CLASS 10 CLASS 10
611 671 n High Tensile Nuts
Series Series conform to ISO-Metric
specifications
CLASS 10 ZINC HEX FLANGE NUTS n Regular ISO Coarse Thread Series
Part No. Dia. - Pitch Pkg Qty Case Qty
CLASS 10 BARE METAL HEX NUTS
611-906 M6-1.00 100 4800
Part No. Dia. - Pitch A/F (W) Qty
611-908 M8-1.25 100 3600
671-006 M6-1.00 10 100
611-910 M10-1.50 50 1200
671-008 M8-1.25 13 100
611-912 M12-1.75 50 1200
671-010 M10-1.50 17 100
671-012 M12-1.75 19 50
671-014 M14-2.00 22 25
671-016 M16-2.00 24 25
671-020 M20-2.50 30 25
671-024 M24-3.00 36 25
CLASS 8
670 n High Tensile Nuts conform to
A/F Across Flats

Series ISO-Metric specifications

n Regular ISO Coarse Thread Series
CLASS 10
CLASS 8 ZINC HEX NUTS 672 n High Tensile Nuts conform
Part No. Dia. - Pitch A/F (W) Thick (T) Qty Series to ISO-Metric specifications
670-003 M3 - 0.50 5.5 2.4 100
n Regular ISO Coarse Thread Series
670-004 M4 - 0.70 7 3.2 100
670-005 M5 - 0.80 8 4 100 CLASS 10 YELLOW ZINC HEX NUTS
670-006 M6 - 1.00 10 5 100 Part No. Dia. - Pitch A/F (W) Qty
670-007 M7 - 1.00 10 5.5 100 672-006 M6-1.00 10 100
670-008 M8 - 1.25 13 6.5 100 672-008 M8-1.25 13 100
670-010 M10 - 1.50 17 8 100 672-010 M10-1.50 17 100
670-012 M12 - 1.75 19 9.5 50 672-012 M12-1.75 19 50
670-014 M14 - 2.00 22 11 25 672-014 M14-2.00 22 25
670-016 M16 - 2.00 24 13 25 672-016 M16-2.00 24 25
670-018 M18 - 2.50 27 15 25 672-018 M18-2.50 27 25
670-020 M20 - 2.50 30 16 25 672-020 M20-2.50 30 25
670-024 M24 - 3.00 36 18 25 672-024 M24-3.00 36 25
A/F Across Flats A/F Across Flats

CLASS 8 CLASS 10
670 672 n Heat Treated
Series Series n High Strength
n Fine Thread Zinc Dichromate Plated n For Critical Applications
CLASS 8 HEX NUTS - FINE & EXTRA FINE THREAD CLASS 10 YELLOW ZINC CONELOK LOCKNUTS
Part No. Dia. - Pitch Qty Part No. Dia. - Pitch A/F (W) Qty
670-208 M8 - 1.00 25 672-206 M6-1.00 10 100
670-210 M10 - 1.25 25 672-208 M8-1.25 13 100
670-212 M12 - 1.50 25 672-210 M10-1.50 17 100
670-214 M14 - 1.50 25 672-212 M12-1.75 19 50
670-216 M16 - 1.50 25 672-214 M14-2.00 22 25
670-218 M18 - 1.50 25 672-216 M16-2.00 24 25
670-220 M20 - 1.50 25 672-218 M18-2.50 27 25
670-750 M10 - 1.00 EXTRA FINE 25 672-220 M20-2.50 30 25
670-765 M12 - 1.25 EXTRA FINE 25 672-224 M24-3.00 36 25
A/F Across Flats

These items are also available

in clamshell clear packs

H. Paulin & Co., a division of The Hillman Group Canada ULC

 7

NUTS

NUTS & WASHERS

CROUS
POZI-LOK CLASS 8
700 n Regular ISO Coarse 705 n Regular ISO Coarse
Series Thread Series Series Thread Series

NYLON COLLAR LOCK NUTS CLASS 8 ZINC HEX JAM NUTS

Part No. Dia. - Pitch A/F (W) Height (H) Qty Part No. Dia. - Pitch A/F (W) Height (H) Qty
700-004 M4 - 0.70 7 5.0 100 705-016 M6 - 1.00 10 5.0 100
700-005 M5 - 0.80 8 5.0 100 705-018 M8 - 1.25 13 6.5 100
700-006 M6 - 1.00 10 6.0 100 705-020 M10 - 1.50 17 8.0 100
700-008 M8 - 1.25 13 8.0 100 705-022 M12 - 1.50 19 10.0 50
700-010 M10 - 1.50 17 10.0 100 705-024 M14 - 2.00 22 11.0 25
700-012 M12 - 1.75 19 12.0 50 705-026 M16 - 1.50 24 13.0 25
700-016 M16 - 2.00 24 16.0 25 705-028 M18 - 2.50 27 15.0 20
705-030 M20 - 2.50 30 16.0 20
TRI-LOK
705
705-032 M22 - 2.50 32 18.0 20
n Regular ISO Coarse 705-034 M24 - 3.00 36 19.0 20
Series Thread Series

LOCK NUTS
Part No. Dia. - Pitch A/F (W) Height (H) Qty
705-008 M8 - 1.25 13 6.5 100
These items are also available
705-010 M10 - 1.50 17 8.0 100 in clamshell clear packs
705-012 M12 - 1.75 19 10.0 50
All metal for high temperature applications.

FLAT WASHERS FENDER WASHERS LOCK WASHERS

RONDELLES ORDINAIRES RONDELLES AILE RONDELLES RESSORT
ISO 7089 ISO 7093-1 DIN 7980
730 I.D. O.D. 730 T
I.D. O.D. 740 I.D. O.D.
Series Series Series T

Hardness Class 200 HV Hardness Class 200 HV Hardness Class 392 to 490 HV
FLAT WASHERS ZINC FENDER WASHERS LOCK WASHERS
Part No. Bolt Size I.D. O.D. Thick (T) Qty Part No. Bolt Size I.D. O.D. Thick (T) Qty Part No. Bolt Size I.D. O.D. Thick (T) Qty
730-005 5 mm 5.3 11.0 1.0 100 730-304 4 mm 4.3 12 1 100 740-004 4 mm 4.1 7.6 0.9 100
730-006 6 mm 6.4 12.5 1.6 100 730-305 5 mm 5.3 15 1 100 740-005 5 mm 5.1 9.2 1.2 100
730-008 8 mm 8.4 17.0 1.6 100 730-306 6 mm 6.4 18 1.6 100 740-006 6 mm 6.1 9.7 1.4 100
730-010 10 mm 10.5 21.0 2.0 100 730-308 8 mm 8.4 24 2.0 100 740-008 8 mm 8.2 12.8 1.9 100
740-010 10 mm 10.2 16.1 2.35 100
730-012 12 mm 13.0 24.0 2.5 50 730-310 10 mm 10.5 30 2.5 50
740-012 12 mm 12.2 18.3 2.35 50
730-014 14 mm 15.0 28.0 2.5 25 730-312 12 mm 13 37 3 50
740-014 14 mm 14.2 21.4 2.8 25
730-016 16 mm 17.0 30.0 3.0 25 730-314 14 mm 15 44 3 25
740-016 16 mm 16.2 24.6 3.3 25
730-018 18 mm 19.0 34.0 3.0 25 730-316 16 mm 17 50 3 25 740-018 18 mm 18.2 26.6 3.3 25
730-020 20 mm 21.0 37.0 3.0 25 740-020 20 mm 20.2 30.6 4.3 25
730-024 24 mm 25.0 44.0 4.0 25 740-024 24 mm 24.5 35.9 4.8 25
Suitable for use with Class 8.8 and 8 Fasteners

ISO 7089 ISO 7093-1 DIN 127 B

730 I.D. O.D. 750 T
I.D. O.D. 740 I.D. O.D.
Series Series Series T

Hardness Class 300 HV Hardness Class 300 HV Hardness Class 430 to 530 HV
YELLOW ZINC FLAT WASHERS FENDER WASHERS YELLOW ZINC LOCK WASHERS
Part No. Bolt Size I.D. O.D. Thick (T) Qty Part No. Bolt Size I.D. O.D. Thick (T) Qty Part No. Bolt Size I.D. O.D. Thick (T) Qty
730-406 6 mm 6.4 12.5 1.6 100 750-004 4 mm 4.3 12 1 100 740-404 4 mm 4.1 7.6 0.9 100
740-405 5 mm 5.1 9.2 1.2 100
730-408 8 mm 8.4 17.0 1.6 100 750-005 5 mm 5.3 15 1 100 740-406 6 mm 6.1 11.8 1.6 100
730-410 10 mm 10.5 21.0 2.0 100 750-006 6 mm 6.4 18 1.6 100 740-408 8 mm 8.1 14.8 2.0 100
730-412 12 mm 13.0 24.0 2.5 50 740-410 10 mm 10.2 18.1 2.2 100
750-008 8 mm 8.4 24 2.0 100
730-414 14 mm 15.0 28.0 2.5 25 740-412 12 mm 12.2 21.1 2.5 50
750-010 10 mm 10.5 30 2.5 50 740-414 14 mm 14.2 24.1 3.0 25
730-416 16 mm 17.0 30.0 3.0 25
750-012 12 mm 13 37 3 50 740-416 16 mm 16.2 27.4 3.5 25
730-418 18 mm 19.0 34.0 3.0 25
740-418 18 mm 18.2 29.4 3.5 25
730-420 20 mm 21.0 37.0 3.0 25 740-420 20 mm 20.2 33.6 4.0 25
730-424 24 mm 25.0 44.0 4.0 25 740-424 24 mm 24.5 40.0 5.0 25
Suitable for use with Class 10.9 and 10 Fasteners

1.800.268.4000 www.hpaulin.com
 8

BOLT BIN ASSORTMENTS

ASSORTMENTS

ASSORTIMENTS DE BOULONS
No. 022KIT-02
METRIC 8.8 8.8
BOLT AND NUT ASSORTMENT
(ZINC PLATED)
Size Quantity Size Quantity
M6 x 12 100 M12 x 25 25
M6 x 25 100 M12 x 35 25
M6 x 35 25 M12 x 50 25
M6 x 50 25 M12 x 60 25
M8 x 20 100 M12 x 70 25
M8 x 25 100 M12 x 100 10
M8 x 35 25 M16 x 35 10
M8 x 50 100 M16 x 50 10
M8 x 60 25 M16 x 60 10
M10 x 20 25 M16 x 70 10
M10 x 25 50 M16 x 100 10 Contains 3,315 pcs.
M10 x 35 50 M20 x 40 5 42 H x 36 W x 12 D
M10 x 50 25 M20 x 50 5 Base not included
M10 x 60 25 M20 x 60 5
M10 x 70 25 M20 x 70 5
M10 x 100 10 M20 x 100 5

Size Nuts Lockwashers Flat Washers

M6 200 200 200
M8 300 200 200
M10 200 200 200
M12 50 100 100
M16 25 25 25
M20 20 25 25

No. 022KIT-03
METRIC 10.9
BOLT AND NUT ASSORTMENT 10.9
(ZINC PLATED)
Size Quantity Size Quantity
M6 x 12 100 M12 x 25 25
M6 x 25 100 M12 x 35 25
M6 x 35 25 M12 x 50 25
M6 x 50 25 M12 x 60 25
M8 x 20 100 M12 x 70 25
M8 x 25 100 M12 x 100 10
M8 x 35 25 M16 x 35 10
M8 x 50 100 M16 x 50 10
M8 x 60 25 M16 x 60 10
M10 x 20 25 M16 x 70 10
M10 x 25 50 M16 x 100 10
M10 x 35 50 M20 x 40 5
M10 x 50 25 M20 x 50 5 Contains 3,315 pcs.
M10 x 60 25 M20 x 60 5 42 H x 36 W x 12 D
M10 x 70 25 M20 x 70 5 Base not included
M10 x 100 10 M20 x 100 5

Size Nuts Lockwashers Flat Washers

M6 200 200 200
M8 300 200 200
M10 200 200 200
M12 50 100 100
M16 25 25 25
M20 20 25 25

H. Paulin & Co., a division of The Hillman Group Canada ULC

 9

METRIC FLANGE BOLTS

BOLTS
BOULONS DE REBORD MTRIQUE
n JIS SPEC B1189
611 615
n JIS SPEC B1189
n Serrated
Series Series
ORDER BY STOCK NUMBER
CLASS 10.9 ZINC HEX FLANGE BOLTS CLASS 8.8 YELLOW ZINC HEX FLANGE BOLTS
Part No. Size Pkg Qty A/F Part No. Size Pkg Qty A/F Part No. Size Pkg Qty A/F
611-267 M6 x 1.0 x 12 20 10 611-332 M8 x 1.25 x 100 20 12 615-205 M5 - .80 x 16 40 8
611-270 M6 x 1.0 x 16 20 10 611-334 M8 x 1.25 x 120 20 12 615-207 M5 - .80 x 20 40 8
611-272 M6 x 1.0 x 20 20 10 611-364 M10 x 1.25 x 16 15 14 615-253 M6 - 1.0 x 12 20 10
611-274 M6 x 1.0 x 25 20 10 611-366 M10 x 1.25 x 20 15 14 615-255 M6 - 1.0 x 16 20 10
611-276 M6 x 1.0 x 30 20 10 611-368 M10 x 1.25 x 25 15 14 615-257 M6 - 1.0 x 20 20 10
611-277 M6 x 1.0 x 35 20 10 611-370 M10 x 1.25 x 30 15 14 615-260 M6 - 1.0 x 25 20 10
611-278 M6 x 1.0 x 40 20 10 611-371 M10 x 1.25 x 35 15 14 615-266 M6 - 1.0 x 40 20 10
611-279 M6 x 1.0 x 45 20 10 611-372 M10 x 1.25 x 40 15 14 615-303 M8 - 1.25 x 12 20 12
611-311 M8x 1.25 x 12 20 12 611-373 M10 x 1.25 x 45 15 14 615-305 M8 - 1.25 x 16 20 12
611-314 M8 x 1.25 x 16 20 12 611-374 M10 x 1.25 x 50 15 14 615-307 M8 - 1.25 x 20 20 12
611-316 M8 x 1.25 x 20 20 12 611-376 M10 x 1.25 x 60 15 14 615-310 M8 - 1.25 x 25 20 12
611-318 M8 x 1.25 x 25 20 12 611-378 M10 x 1.25 x 70 10 14 615-312 M8 - 1.25 x 30 20 12
611-320 M8 x 1.25 x 30 20 12 611-380 M10 x 1.25 x 80 10 14 615-314 M8 - 1.25 x 35 20 12
611-321 M8 x 1.25 x 35 20 12 611-412 M12 x 1.75 x 25 10 17 615-316 M8 - 1.25 x 40 20 12
611-322 M8 x 1.25 x 40 20 12 611-414 M12 x 1.75 x 30 10 17 615-357 M10 - 1.25 x 20 15 14
611-323 M8 x 1.25 x 45 20 12 611-415 M12 x 1.75 x 35 10 17 615-362 M10 - 1.25 x 30 15 14
611-324 M8 x 1.25 x 50 15 12 611-416 M12 x 1.75 x 40 10 17 615-364 M10 - 1.25 x 35 15 14
611-326 M8 x 1.25 x 60 15 12 611-418 M12 x 1.75 x 50 10 17 615-366 M10 - 1.25 x 40 15 14
611-328 M8 x 1.25 x 70 15 12 611-420 M12 x 1.75 x 60 10 17 615-370 M10 - 1.25 x 50 15 14
611-330 M8 x 1.25 x 80 20 12 611-424 M12 x 1.75 x 80 5 17 615-374 M10 - 1.25 x 60 15 14
A/F Across Flats 615-378 M10 - 1.25 x 70 10 14
This item is also available in clamshell clear pack. See page 5. 615-382 M10 - 1.25 x 80 10 14
615-410 M12 - 1.25 x 25 10 17
615-412 M12 - 1.25 x 30 10 17

BUMPER BAR BOLTS 615-414 M12 - 1.25 x 35 10 17

615-416 M12 - 1.25 x 40 10 17
BOULONS DE PARE-CHOCS 615-420 M12 - 1.25 x 50 10 17
n Button Head 615-424 M12 - 1.25 x 60 10 17
245 n Blue Zinc Plated
Series

245-220 Std. Pkg. 10 pcs. 245-223 Std. Pkg. 10 pcs. 245-222 Std. Pkg. 10 pcs.
M81.25 x 25mm M81.25 x 27mm M81.25 x 28mm
Chrome Plated Capped Chrome Plated Uncapped Chrome Plated Stainless Steel Capped
Bumper Bar Bolts W/Nuts Bumper Bar Bolts Bumper Bar Bolts W/Nuts
CL Part No: 910-1390, Pieces: 2

245-221 Std. Pkg. 10 pcs. 245-233 Std. Pkg. 10 pcs. 245-238 Std. Pkg. 10 pcs.
M81.25 x 30mm M101.5 x 33.5mm M121.75 x 35mm
Uncapped Stainless Steel Capped Stainless Steel Capped
Bumper Bar Bolts W/Nuts Bumper Bar Bolts W/Nuts Bumper Bar Bolts W/Nuts

These items are also available

in clamshell clear packs

1.800.268.4000 www.hpaulin.com
 10

FLANGE NUTS
FLANGE NUTS

CROUS DE REBORD

244-952 Pkg Qty: 50 244-953 Pkg Qty: 25 244-955 Pkg Qty: 25

M50.8 M50.8 M61.0
Free Spinning Washer Nut CHRYSLER Washer Nut
Zinc & Yellow Plated 10mm Washer O.D. FORD Washer Nut Phosphate Coated 18mm Washer O.D.
Hex Size: 8mm Height: 7mm Phosphate Coated 15mm Washer O.D. Hex Size: 10mm Height: 9mm
N802775-S36 Hex Size: 10mm Height: 7mm 6100048
N621903
CL Part No: 910-0160 Pieces: 4 CL Part No: 910-0130 Pieces: 4

244-956 Pkg Qty: 25 244-957 Pkg Qty: 25 244-958 Pkg Qty: 25

M61.0 M61.0 M6.31.0
GM, FORD Free Spinning Washer Nut Free Spinning Washer Nut GM Free Spinning Washer Nut
Phosphate Coated 16mm Washer O.D. Phosphate Coated 20mm Washer O.D. Phosphate Coated 16 mm Washer O.D.,
Hex Size: 10mm Height: 7mm Hex Size: 10mm Height: 9mm Hex Size: 11mm Height: 9mm
GM 11503752, 1150329, VW N90100001 6100049 11500747, 11501106
CL Part No: 910-0125 Pieces: 4 CL Part No: 910-0170 Pieces: 2 CL Part No: 910-0175 Pieces: 3

244-959 Pkg Qty: 100 244-970 Pkg Qty: 50 244-985 Pkg Qty: 25
M81.25 M50.8 M61.0
GM
Hex Flange Nut Spin Lock Nuts With Serrations
Spin Lock Nuts With Serrations
Black Oxide 11.5mm Washer O.D. Case Hardened, Phosphate Coated
Case Hardened, Phosphate Coated
Hex Size: 8mm Height: 5mm 17mm Washer O.D. Hex Size: 10mm
19mm Washer O.D. Hex Size: 13mm
CL Part No: 910-0180 Pieces: 4 CL Part No: 910-0120 Pieces: 3 CL Part No: 910-0165 Pieces: 6

244-986 Pkg Qty: 25 244-987 Pkg Qty: 25 244-988 Pkg Qty: 25

M61.0 M81.25 M101.5
GM Flange Nut GM Flange Nut
GM Flange Nut Phosphate Coated 17mm Washer O.D., Phosphate Coated 21mm Washer O.D.
Phosphate 14mm Washer O.D. Hex Size: 13mm, Height: 8mm Hex Size: 15mm Height: 10mm
Hex Size: 10mm Height: 6mm 11501889 11501850
11503745
CL Part No: 910-0135 Pieces: 4 CL Part No: 910-0150 Pieces: 3

244-996 Pkg Qty: 25 244-997 Pkg Qty: 25 244-998 Pkg Qty: 25

M61.0 M81.25 M101.25
Spin Lock Nuts With Serrations Spin Lock Nuts With Serrations Spin Lock Nuts With Serrations
Zinc Plated 14mm Washer O.D. Zinc Plated 17mm Washer O.D. Zinc Plated 19mm Washer O.D.
Hex Size: 10mm Height: 6mm Hex Size: 12mm Height: 8mm Hex Size: 14mm Height: 10.5mm
CL Part No: 009-126 Pieces: 4 CL Part No: 910-0140 Pieces: 3 CL Part No: 910-0145 Pieces: 2

For a more comprehensive listing of these parts, please refer to our current Body Shop Fastener Catalogue.

H. Paulin & Co., a division of The Hillman Group Canada ULC

 11

TAPPING SCREWS

SCREWS
VIS TARAUDEUSES

230 230
Series Series
Std Pkg: 100 pcs Std Pkg: 100 pcs
PAN POZI-DRIV HEAD CHROME PLATED SPECIAL TAPPING SCREWS BLACK
Part No. Dia. x Length Qty Part No. Dia. x Length Qty CL Part # Pcs
230-203 4.2 x 13 mm 100 230-623 M2 - 1.41 x 20 mm 100 970-1270 3
230-205 4.2 x 20 mm 100
230-206 4.2 x 20mm 100

230 245
Series Series
Std Pkg: 100 pcs Std Pkg: 100 pcs
OVAL POZI-DRIV HEAD CHROME PLATED HEX WASHER HEAD SCREWS
Part No. Dia. x Length Qty Part No. Dia. x Length Qty
230-207 4.2 x 20mm 100 245-407 M6 - 1.0 x 25 mm 25
245-408 M6 - 1.0 x 25 mm 25
245-405 M6 - 1.0 x 20 mm 25

230 245-320
245-405


M5 - 0.8 x 20 mm
M6 - 1.0 x 20 mm
25
25
Series
245-450 M10 - 1.5 x 40 mm 15
Std Pkg: 100 pcs
245-526 M8 - 1.25 x 25 mm 25
SPECIAL TAPPING SCREWS BLACK
245-440 M8 - 1.25 x 30 mm 25
Part No. Dia. x Length Qty CL Part # Pcs
245-510 M8 - 1.0 x 35 mm 25
230-619 M4.8 - 1.61 x 19 mm 100 910-1275 3

TRIM SCREWS MACHINE SCREWS

VIS FINITION VIS MCANIQUES
L
230 771
Series Series
Std Pkg: 100 pcs Std Pkg: 100 pcs
ROUND WASHER HEAD POZI-DRIV - Chrome Plated PAN PHILLIPS HEAD MACHINE SCREWS
Part No. Dia. x Length Qty Part No. Size Part No. Size
230-301 4.2 x 8 mm 100 771-123 M3 - 0.5 x 6 771-198 M5 - 0.8 x 12
230-302 4.2 x 12 mm 100 771-125 M3 - 0.5 x 10 771-201 M5 - 0.8 x 16
230-304 4.2 x 16 mm 100 771-126 M3 - 0.5 x 16 771-203 M5 - 0.8 x 20
230-305 4.2 x 20 mm 100 771-127 M3 - 0.5 x 20 771-205 M5 - 0.8 x 25
ROUND WASHER HEAD POZI-DRIV - Black Oxide 771-128 M3 - 0.5 x 25 771-206 M5 - 0.8 x 30
Part No. Dia. x Length Qty CL Part # Pcs 771-129 M3 - 0.5 x 30 771-207 M5 - 0.8 x 35
230-303 4.2 x 12 mm 100 - - 771-130 M3 - 0.5 x 35 771-208 M5 - 0.8 x 40
230-306 4.2 x 20 mm 100 970-1245 10 771-131 M3 - 0.5 x 50 771-211 M5 - 0.8 x 50
771-132 M4 - 0.7 x 6 771-265 M6 - 1.0 x 8
771-134 M4 - 0.7 x 10 771-266 M6 - 1.0 x 10
771-136 M4 - 0.7 x 12 771-267 M6 - 1.0 x 12
771-139 M4 - 0.7 x 16 771-270 M6 - 1.0 x 16
771-141 M4 - 0.7 x 20 771-272 M6 - 1.0 x 20
771-143 M4 - 0.7 x 25 771-274 M6 - 1.0 x 25
771-145 M4 - 0.7 x 30 771-276 M6 - 1.0 x 30
771-146 M4 - 0.7 x 35 771-277 M6 - 1.0 x 35
771-147 M4 - 0.7 x 40 771-278 M6 - 1.0 x 40
771-149 M4 - 0.7 x 50 771-280 M6 - 1.0 x 50
771-151 M4 - 0.7 x 60 771-311 M8 - 1.25 x 12
771-195 M5 - 0.8 x 6 771-320 M8 - 1.25 x 30
771-197 M5 - 0.8 x 10 771-322 M8 - 1.25 x 40

For a more comprehensive listing of these parts, please refer to our current Body Shop Fastener Catalogue.

1.800.268.4000 www.hpaulin.com
 12

U NUTS
BODY SHOP FASTENERS

CROUS U

241-606 Std. Pkg. 25 pcs. 241-607 Std. Pkg. 25 pcs.

Screw Size: M61.0 Screw Size: M61.0

FORD, GM GM
Metric U Nut Metric U Nut
Ctr. of Hole to Edge: 13.5 mm, Panel Range: .80 mm 4 mm Ctr. of Hole to Edge: 19.5mm, Panel Range: .34mm - 4mm
11503957, 1016937, N623332-S2, N623332-S53, N623332-S100 11503715, 11508241, 11609385

CL Part No: 910-1420 Pieces: 3 CL Part No: 910-1421 Pieces: 2

241-608 Std. Pkg. 25 pcs. 241-609 Std. Pkg. 25 pcs.

Screw Size: M8 1.25 Screw Size: M81.25

FORD, GM CHRYSLER , FORD, GM

Metric U Nut Metric U Nut
Ctr. of Hole to Edge: 20 mm, Panel Range: .80 mm - 4.5 mm Ctr. of Hole to Edge: 14.5 mm, Panel Range: .80 mm - 4 mm
11500661, 11503317, 11516150, N623343-S2, N623343-S100 11500660, 11502617, N623333-S2, 6101283

CL Part No: 910-1430 Pieces: 2 CL Part No: 910-1427 Pieces: 3

241-610 Std. Pkg. 10 pcs. 241-612 Std. Pkg. 25 pcs.

Screw Size: M101.5 Screw Size: M63 x 1.0

GM
Metric U Nut
Metric U Nut
Ctr. of Hole to Edge: 13.5 mm, Panel Range: .80 mm - 4 mm
Ctr. of Hole to Edge: 19 mm, Panel Range: 1 mm - 6 mm
11500658, 9433043
11500662, 22531616

CL Part No: 910-1435 Pieces: 2 CL Part No: 910-1425 Pieces: 3

For a more comprehensive listing of these parts, please refer to our current Body Shop Fastener Catalogue.

H. Paulin & Co., a division of The Hillman Group Canada ULC

 13

BOLT RETAINERS

BODY SHOP FASTENERS

RETENUES DE BOULONS

243-305 Std. Pkg. 100 pcs. 243-306 Std. Pkg. 100 pcs. 243-307 Std. Pkg. 100 pcs.
Stud Size: M50.8 Stud Size: M6 Stud Size: M6.3

Push-On Bolt Retainer

Push-On Bolt Retainer
17mm O.D. Push-On Bolt Retainer
11mm O.D.
14.3mm O.D.

CL Part No: 910-1755 Pieces: 10 CL Part No: 910-1756 Pieces: 10

243-308 Std. Pkg. 100 pcs. 243-310 Std. Pkg. 100 pcs. 243-312 Std. Pkg. 100 pcs.
Stud Size: M8 Stud Size: M10 Stud Size: M12

Push-On Bolt Retainer Push-On Bolt Retainer

Push-On Bolt Retainer
24 mm O.D. 21.4 mm O.D.
24 mm O.D.

CL Part No: 910-1757 Pieces: 8 CL Part No: 910-1759 Pieces: 8

BODY BOLTS
BOULONS DE CARROSSERIE

245-310 Std. Pkg. 50 pcs. 245-315 Std. Pkg. 25 pcs. 245-322 Std. Pkg. 25 pcs.
M4.21.41 x 20 mm M61.0 x 28 mm M61.0 x 22 mm
FORD
GM FORD
Body Bolt Phosphate Hex Head Sems
Body Bolt Phosphate Hex Head Sems Body Bolt Phosphate
With Dog Point
12 mm Washer O.D. Hex Size: 7 mm 19 mm Washer O.D. Hex Size: 8 mm
19 mm Washer O.D. Hex Size: 8 mm
11504056, 11513801 N606676-S2, N606676-S100
N606677-S43B
CL Part No: 910-1285 Pieces: 6 CL Part No: 910-0060 Pieces: 4 CL Part No: 910-0046 Pieces: 4

245-323 Std. Pkg. 25 pcs. 245-324 Std. Pkg. 25 pcs. 245-325 Std. Pkg. 25 pcs.
M61.0 x 28 mm M61.0 x 30 mm M61.0 x 30 mm

FORD CHRYSLER
GM
Hex Head Sems With Dog Point Body Bolt Phosphate
Hex Head Sems
19 mm Washer O.D. Hex Size: 8 mm 19 mm Washer O.D., Hex Size: 10 mm
24 mm Washer O.D. Hex Size: 10 mm
Class 9.8 N606677-S36 6100568
Class 9.8 11503825
CL Part No: 910-0057 Pieces: 3

For a more comprehensive listing of these parts, please refer to our current Body Shop Fastener Catalogue.

1.800.268.4000 www.hpaulin.com
 14

BODY BOLTS
BODY SHOP FASTENERS

BOULONS DE CARROSSERIE

245-326 Std. Pkg. 50 pcs. 245-399 Std. Pkg. 25 pcs. 245-400 Std. Pkg. 25 pcs.
M50.8 x 20 mm M4.21.41 x 20 mm M4.21.41 x 20 mm

CHRYSLER Hex Head Sems With Teks Point GM

Hex Head Sems with Dog Point 12 mm Head O.D. Hex Size: 7 mm Indented Hex Head Sems Phosphate
12 mm Washer O.D. Hex Size: 8 mm 16 mm Washer O.D. Hex Size: 7 mm
6100539 Not Available through OEM. 11500434, 11503892, 1640810

CL Part No: 910-0035 Pieces: 5 CL Part No: 910-0057 Pieces: 3 CL Part No: 910-0030 Pieces: 5

245-405 Std. Pkg. 25 pcs. 245-407 Std. Pkg. 25 pcs. 245-408 Std. Pkg. 25 pcs.
M61.0 x 20 mm M61.0 x 25 mm M61.0 x 25 mm

GM GM GM
Body Bolt Phosphate Body Bolt Phosphate Body Bolt Phosphate
17 mm Washer O.D. Hex Size: 10 mm 17 mm Washer O.D. Hex Size: 10 mm 24 mm Washer O.D. Hex Size: 10 mm
11502941, 11506174 1503834, 20351035 11503982

CL Part No: 910-0043 Pieces: 3 CL Part No: 910-0050 Pieces: 5 CL Part No: 910-0053 Pieces: 4

245-420 Std. Pkg. 25 pcs. 245-421 Std. Pkg. 25 pcs. 245-424 Std. Pkg. 25 pcs.
M6.31.0 x 20 mm M6.31.81 x 20 mm M6.31.0 x 25 mm

GM HONDA, NISSAN, TOYOTA

Body Bolt Phosphate Hex Head Sems Body Bolt Phosphate
17 mm Washer O.D. Hex Size: 10 mm 18 mm Washer O.D. Hex Size: 10 mm 18 mm Washer O.D.
11501105 11500754
Not Available through OEM.
CL Part No: 910-0070 Pieces: 4

245-425 Std. Pkg. 25 pcs. 245-439 Std. Pkg. 25 pcs. 245-440 Std. Pkg. 25 pcs.
M6.31.0 x 25 mm M81.25 x 25 mm M81.25 x 30 mm

GM
GM
Body Bolt Phosphate Body Bolt Phosphate
Hex Head Sems
24 mm Washer O.D. 24 mm Washer O.D. Hex Size: 13 mm
24 mm Washer O.D., Hex Size: 13 mm
365718 1501188
11503619
CL Part No: 910-0090 Pieces: 2

For a more comprehensive listing of these parts, please refer to our current Body Shop Fastener Catalogue.

H. Paulin & Co., a division of The Hillman Group Canada ULC

 15

BODY BOLTS

BODY SHOP FASTENERS

BOULONS DE CARROSSERIE

245-441 Std. Pkg. 25 pcs. 245-450 Std. Pkg. 15 pcs. 245-505 Std. Pkg. 25 pcs.
M81.25 x 30 mm M101.5 x 40 mm M61.0 x 20 mm

GM GM GM
Body Bolt Phosphate Body Bolt Phosphate Indented Hex Head Body Bolt Phosphate
17 mm Washer O.D. Hex Size: 13 mm 29 mm Washer O.D. Hex Size: 15 mm 13 mm Washer O.D. Hex Size: 10 mm
11500971 11501193 11503800

CL Part No: 910-0085 Pieces: 3 CL Part No: 910-0100 Pieces: 2 CL Part No: 910-0040 Pieces: 4

245-507 Std. Pkg. 25 pcs. 245-510 Std. Pkg. 15 pcs. 245-525 Std. Pkg. 25 pcs.
M61.0 x 25 mm M61.0 x 35 mm M61.0 x 20 mm

GM
GM GM
Indented Hex Head Body Bolt Phosphate
Indented Hex Head Body Bolt Phosphate Indented Hex Head Body Bolt Phosphate
17 mm Washer O.D. Hex Size: 10 mm
13 mm Washer O.D. Hex Size: 10 mm 17 mm Washer O.D. Hex Size: 13 mm
11505044
11503958 11503632
CL Part No: 910-0065 Pieces: 3

245-526 Std. Pkg. 25 pcs. 245-527 Std. Pkg. 15 pcs.

M81.25 x 25 mm M81.25 x 30 mm

GM GM
Hex Head Sems Body Bolt Phosphate Indented Hex Head Body Bolt Phosphate
24 mm Washer O.D. Hex Size: 13 mm 17 mm Washer O.D. Hex Size: 13 mm
11503619 11500971

CL Part No: 910-0075 Pieces: 2 CL Part No: 910-0080 Pieces: 2

For a more comprehensive listing of these parts, please refer to our current Body Shop Fastener Catalogue.

1.800.268.4000 www.hpaulin.com
 16

LICENCE PLATE SCREWS

BODY SHOP FASTENERS

VIS POUR LICENCE

230-616 Std. Pkg. 50 pcs. 245-613 Std. Pkg. 50 pcs. 245-911 Std. Pkg. 25 pcs.
M61.0 x 20 mm M61.0 x 20 mm M61.81 x 20 mm
CHRYSLER, HONDA & AMC CHRYSLER, FORD, AMC HONDA 1990-on, TOYOTA
Zinc Plated Slotted Hex Washer Head Phillips Hex Washer Head
Zinc Plated Slotted Hex Washer Head
Licence Plate Screw Licence Plate Screw
Licence Plate Screw
13 mm Washer O.D. Hex Size: 10 mm, Head O.D. Hex Size: 10 mm
CHRY 34201287, AMC 8934201287 13 mm Washer O.D. Hex Size: 10 mm
CHRY 34201287, AMC 8934201287 TOYOTA 93904-46320,
CL Part No: 910-1190 Pieces: 4 HONDA 91500-SM4-999AH

245-912 Std. Pkg. 25 pcs.

M61.0 x 16 mm
Slotted Round Washer Head
Licence Plate Screw
Head O.D. 14 mm
RODS & PINS

RODS STUDS COTTER PINS

TIGES GOUJONS GOUPILLES
CLASS 8.8
141 n ISO Coarse Thread 264 752
Series n Fully Threaded Steel Rods Series Series
n Bright Zinc Plated

CLASS 8.8 PLATED UNI-RODS - 1M ENGINE STUDS COTTER PINS

Part No. Size Qty Part No. Dia x Length Pkg Qty Case Qty Part No. Dia x Length Pkg Qty Case Qty
141-706 M6 x 1.00 10 264-230 M6 - 1.00 x 30 10 840 752-006 1.5 x 16 100 7500
141-708 M8 x 1.25 10 264-338 M8 - 1.25 x 38 10 840 752-015 2 x 20 100 7500
141-710 M10 x 1.50 10 264-339 M8 - 1.25 x 40 10 840 752-024 3 x 25 100 7500
141-712 M12 x 1.75 5 264-346 M8 - 1.25 x 46 10 840 752-027 3 x 40 100 3200
141-714 M14 x 2.00 5 264-348 M8 - 1.25 x 50 10 480 752-037 4 x 50 100 2000
141-716 M16 x 2.00 5 264-640 M8 - 1.25 x 40 10 840
141-718 M18 x 2.50 3 264-327 M8 - 1.0 x 40 10 840
141-720 M20 x 2.50 3 264-449 M10 - 1.5 x 40 10 840
141-724 M24 x 3.00 3 264-451 M10 - 1.5 x 50 10 480
264-453 M10 - 1.50 x 62 10 360
CLASS 10.9
141 n ISO Coarse Thread
264-454
264-442
M10 - 1.5 x 60
M10 - 1.25 x 40
10
10
360
840
Series n Fully Threaded Steel Rods 264-450 M10 - 1.25 x 50 10 480
264-459 M12 - 1.75 x 35 10 840
CLASS 10.9 BARE UNI-RODS - 1M 264-460 M12 - 1.5 x 35 10 840
Part No. Size Qty 264-461 M12 - 1.5 x 40 10 840
141-806 M6 x 1.00 10 264-462 M12 - 1.25 x 50 10 480
141-808 M8 x 1.25 10
141-810 M10 x 1.50 10
141-812 M12 x 1.75 5
141-814 M14 x 2.00 5
141-816 M16 x 2.00 5
141-818 M18 x 2.50 3
141-820 M20 x 2.50 3 These items are also available
in clamshell clear packs
141-824 M24 x 3.00 3

H. Paulin & Co., a division of The Hillman Group Canada ULC

 17

METRIC 18.8 STAINLESS STEEL HEX HEAD CAP SCREWS

18.8 STAINLESS STEEL

BOULONS HEX ACIER INOXYDABLE MTRIQUE 18,8

5900
Series

ORDER BY STOCK NUMBER

M6 Diameter - Across Flats 10 mm M8 Diameter - Across Flats 13 mm M10 Diameter - Across Flats 16 mm
Part No. Dia x Length Pkg Qty Part No. Dia x Length Pkg Qty Part No. Dia x Length Pkg Qty
5900-305 M6 - 1.0 x 12 mm 50 5900-405 M8 - 1.25 x 12 50 5900-507 M10 - 1.5 x 20 50
5900-306 M6 - 1.0 x 16 mm 50 5900-406 M8 - 1.25 x 16 50 5900-509 M10 - 1.5 x 25 50
5900-307 M6 - 1.0 x 20 mm 50 5900-407 M8 - 1.25 x 20 50 5900-510 M10 - 1.5 x 30 50
5900-309 M6 - 1.0 x 25 mm 50 5900-409 M8 - 1.25 x 25 50 5900-511 M10 - 1.5 x 35 50
5900-310 M6 - 1.0 x 30 mm 50 5900-410 M8 - 1.25 x 30 50 5900-512 M10 - 1.5 x 40 50
5900-311 M6 - 1.0 x 35 mm 50 5900-411 M8 - 1.25 x 35 50 5900-515 M10 - 1.5 x 45 25
5900-312 M6 - 1.0 x 40 mm 50 5900-412 M8 - 1.25 x 40 50 5900-516 M10 - 1.5 x 50 25
5900-315 M6 - 1.0 x 45 mm 25 5900-415 M8 - 1.25 x 45 25 5900-517 M10 - 1.5 x 60 10
5900-316 M6 - 1.0 x 50 mm 25 5900-416 M8 - 1.25 x 50 25 5900-519 M10 - 1.5 x 70 10
5900-317 M6 - 1.0 x 60 mm 25 5900-417 M8 - 1.25 x 60 15 5900-520 M10 - 1.5 x 80 10
5900-419 M8 - 1.25 x 70 15 5900-522 M10 - 1.5 x 90 10
5900-420 M8 - 1.25 x 80 15 5900-524 M10 - 1.5 x 100 10

M12 Diameter - Across Flats 18 mm M16 Diameter - Across Flats 24 mm M20 Diameter - Across Flats 30 mm
Part No. Dia x Length Pkg Qty Part No. Dia x Length Pkg Qty Part No. Dia x Length Pkg Qty
5900-609 M12 - 1.75 x 25 25 5900-709 M16 - 2.0 x 25 5 5900-815 M20 - 2.5 x 45 5
5900-610 M12 - 1.75 x 30 25 5900-710 M16 - 2.0 x 30 5 5900-816 M20 - 2.5 x 50 5
5900-611 M12 - 1.75 x 35 25 5900-711 M16 - 2.0 x 35 5 5900-817 M20 - 2.5 x 60 5
5900-612 M12 - 1.75 x 40 25 5900-712 M16 - 2.0 x 40 5 5900-819 M20 - 2.5 x 70 5
5900-615 M12 - 1.75 x 45 15 5900-715 M16 - 2.0 x 45 5 5900-820 M20 - 2.5 x 80 5
5900-616 M12 - 1.75 x 50 15 5900-716 M16 - 2.0 x 50 5 5900-822 M20 - 2.5 x 90 5
5900-617 M12 - 1.75 x 60 10 5900-717 M16 - 2.0 x 60 5 5900-824 M20 - 2.5 x 100 5
5900-619 M12 - 1.75 x 70 10 5900-719 M16 - 2.0 x 70 5 5900-826 M20 - 2.5 x 120 5
5900-620 M12 - 1.75 x 80 10 5900-720 M16 - 2.0 x 80 5 5900-828 M20 - 2.5 x 130 5
5900-622 M12 - 1.75 x 90 5 5900-722 M16 - 2.0 x 90 5 5900-830 M20 - 2.5 x 150 5
5900-624 M12 - 1.75 x 100 5 5900-724 M16 - 2.0 x 100 5

METRIC 18.8 STAINLESS STEEL SOCKET HEAD CAP SCREWS M4 Diameter - Hex Size 3 mm
BOULONS DE PRESSION ACIER INOXYDABLE MTRIQUE 18,8 Part No. Dia x Length Pkg Qty
5914-102 M4 - 0.7 x 8 50
5914-103 M4 - 0.7 x 10 50
5914 5914-105
5914-106
M4 - 0.7 x 12
M4 - 0.7 x 16
50
50
Series
5914-107 M4 - 0.7 x 20 50
5914-109 M4 - 0.7 x 25 50
ORDER BY STOCK NUMBER
M5 Diameter - Hex Size 4 mm M6 Diameter - Hex Size 5 mm M8 Diameter - Hex Size 6 mm
Part No. Dia x Length Pkg Qty Part No. Dia x Length Pkg Qty Part No. Dia x Length Pkg Qty
5914-203 M5 - 0.8 x 10 50 5914-303 M6 - 1.0 x 10 50 5914-406 M8 - 1.25 x 16 50
5914-205 M5 - 0.8 x 12 50 5914-305 M6 - 1.0 x 12 50 5914-407 M8 - 1.25 x 20 50
5914-206 M5 - 0.8 x 16 50 5914-306 M6 - 1.0 x 16 50 5914-409 M8 - 1.25 x 25 50
5914-207 M5 - 0.8 x 20 50 5914-307 M6 - 1.0 x 20 50 5914-410 M8 - 1.25 x 30 25
5914-209 M5 - 0.8 x 25 50 5914-309 M6 - 1.0 x 25 50 5914-411 M8 - 1.25 x 35 25
5914-210 M5 - 0.8 x 30 50 5914-310 M6 - 1.0 x 30 25 5914-412 M8 - 1.25 x 40 25
5914-211 M5 - 0.8 x 35 50 5914-311 M6 - 1.0 x 35 25 5914-415 M8 - 1.25 x 45 25
5914-312 M6 - 1.0 x 40 25 5914-416 M8 - 1.25 x 50 15
5914-417 M8 - 1.25 x 55 15
5914-418 M8 - 1.25 x 60 15

M10 Diameter - Hex Size 8 mm M12 Diameter - Hex Size 10 mm M16 Diameter - Hex Size 14 mm
Part No. Dia x Length Pkg Qty Part No. Dia x Length Pkg Qty Part No. Dia x Length Pkg Qty
5914-507 M10 - 1.5 x 20 50 5914-610 M12 - 1.75 x 30 20 5914-710 M16 - 2.0 x 30 5
5914-509 M10 - 1.5 x 25 50 5914-611 M12 - 1.75 x 35 20 5914-711 M16 - 2.0 x 35 5
5914-510 M10 - 1.5 x 30 25 5914-612 M12 - 1.75 x 40 15 5914-712 M16 - 2.0 x 40 5
5914-511 M10 - 1.5 x 35 25 5914-615 M12 - 1.75 x 45 15 5914-715 M16 - 2.0 x 45 5
5914-512 M10 - 1.5 x 40 15 5914-616 M12 - 1.75 x 50 15 5914-716 M16 - 2.0 x 50 5
5914-515 M10 - 1.5 x 45 15 5914-617 M12 - 1.75 x 55 10 5914-717 M16 - 2.0 x 55 5
5914-516 M10 - 1.5 x 50 10 5914-618 M12 - 1.75 x 60 5 5914-718 M16 - 2.0 x 60 5
5914-517 M10 - 1.5 x 55 10 5914-619 M12 - 1.75 x 70 5 5914-719 M16 - 2.0 x 70 5
5914-518 M10 - 1.5 x 60 10
5914-519 M10 - 1.5 x 70 10

1.800.268.4000 www.hpaulin.com
 18

METRIC 18.8 STAINLESS STEEL HEX NUTS, WASHERS AND SCREWS

18.8 STAINLESS STEEL

CROUS HEX, RONDELLES ET VIS ACIER INOXYDABLE MTRIQUE 18,8

5901 5904
Series Series

FINISHED HEX NUTS NYLON INSERT STOP NUTS

Part No. Bolt Dia. (mm) Pkg Qty A/F Part No. Bolt Dia. (mm) Pkg Qty A/F
5901-008 M4 - 0.7 50 7 mm 5904-014 M6 - 1.0 50 10 mm
5901-010 M5 - 0.8 50 8 mm 5904-016 M8 - 1.25 50 13 mm
5901-014 M6 - 1.0 50 10 mm 5904-018 M10 - 1.5 50 16 mm
5901-016 M8 - 1.25 50 13 mm 5904-022 M12 - 1.75 25 18 mm
5901-018 M10 - 1.5 50 16 mm 5904-024 M16 - 2.0 5 24 mm
5901-022 M12 - 1.75 25 18 mm 5904-026 M20 - 2.5 5 30 mm
5901-024 M16 - 2.0 5 24 mm 5904-028 M24 - 3.0 5 36 mm
5901-026 M20 - 2.5 5 30 mm A/F - Across flats
A/F - Across flats

5908 5909
Series Series

FLAT WASHERS MEDIUM LOCK WASHERS

Part No. Bolt Dia. (mm) Inside Dia. Outside Dia. Thickness Pkg Qty Part No. Bolt Dia. (mm) Inside Dia. Outside Dia. Thickness Pkg Qty
5908-214 6 mm 6.4 12.5 1.6 50 5909-014 6 mm 6.1 11.8 1.6 50
5908-216 8 mm 8.4 17.0 1.6 50 5909-016 8 mm 8.1 14.8 2.0 50
5908-218 10 mm 10.5 21.0 2.0 50 5909-018 10 mm 10.2 18.1 2.2 50
5908-222 12 mm 13.0 24.0 2.5 25 5909-022 12 mm 12.2 21.1 2.5 25
5908-224 16 mm 17.0 30.0 3.0 5 5909-024 16 mm 16.2 27.4 3.5 5
5908-226 20 mm 21.0 37.0 3.0 5 5909-026 20 mm 20.2 33.6 4.0 5

5912
Series

ISO 7093-1
FENDER WASHER THREADED ROD - 1m
Part No. Bolt Dia. (mm) Inside Dia. Outside Dia. Thickness Pkg Qty Part No. Dia x Length Qty
5908-614 6 mm 6.4 18.0 1.6 50 5912-308 M4 - 0.7 1
5908-616 8 mm 8.4 24.0 2.0 50 5912-310 M5 - 0.8 1
5908-618 10 mm 10.5 30.0 2.5 25 5912-314 M6 - 1.0 1
5908-622 12 mm 13.0 37.0 3.0 25 5912-316 M8 - 1.25 1
5912-318 M10 - 1.5 1
5912-322 M12 - 1.75 1
5912-324 M16 - 2.0 1
5912-326 M20 - 2.5 1
5912-328 M22 - 2.5 1
5912-330 M24 - 3.0 1

H. Paulin & Co., a division of The Hillman Group Canada ULC

 19

METRIC GARAGE ASSORTMENTS

ASSORTMENTS
ASSORTIMENTS POUR GARAGE MTRIQUE
Most popular METRIC FASTENERS packed in divided plastic containers.

Contains 100 Screws, 6 sizes Contains 100 Nuts, 4 sizes

020-027 Pan, Oval - Phillips Trim 020-038 Contains 18 pcs, 6 sizes 020-075 Regular & Washer Types
TRIM SCREWS INCH & METRIC DRAIN PLUGS INCH & METRIC DRAIN PLUGS
Part No. Size Qty Part No. Size Qty Part No. Size Qty
230-203 4.2 x 13 mm 15 263-710 1-2 - 20 STD 4 243-004 M4 25
230-205 4.2 x 20 mm 17 263-911 12 mm x 1.75 STD 3 243-005 M5 15
230-207 4.2 x 13 mm 17 263-914 14 mm x 1.5 STD 2 243-105 M5 15
230-302 4.2 x 12 mm 17 263-816 9/16 x 13/16 4 243-106 M6 45
230-304 4.2 x 16 mm 17 263-815 31/64 x 3/4 3
230-305 4.2 x 20 mm 17 263-817 5/8 x 15/16 2

Contains 30 Nuts, 5 sizes,

020-077 Contains 100 Retainers, 4 sizes 020-079 Multi-Thread 020-125 Contains 82 pcs, 7 sizes
BOLT RETAINERS U NUTS CAP SCREWS
Part No. Size Qty Part No. Size Qty Part No. Size Qty
243-306 M6 20 241-605 M4 x 0.7 4 608-139 M4 x 16 12
243-308 M8 35 241-607 M4 x 1.0 L 6 608-201 M5 x 16 12
243-310 M10 35 241-608 M4 x 1.25 L 8 608-203 M5 x 20 15
243-312 M12 10 241-609 M8 x 1.25 6 608-205 M5 x 25 10
241-610 M8 x 1.5 6 608-270 M6 x 16 10
608-274 M6 x 25 15
608-277 M6 x 35 8

020-126 Contains 25 pcs, 7 sizes 020-127 Contains 110 pcs, 6 sizes 020-128 Contains 33 pcs, 5 sizes
CLASS 8.8 CAP SCREWS HEX NUTS NYLON COLLAR LOCK NUTS
Part No. Size Qty Part No. Size Qty Part No. Size Qty
608-314 M8 x 16 6 670-004 M4 20 700-004 M4 8
608-316 M8 x 20 4 670-005 M5 20 700-005 M5 8
608-318 M8 x 25 5 670-006 M6 25 700-006 M6 8
608-231 M8 x 35 2 670-008 M8 25 700-008 M8 6
608-370 M10 x 30 3 670-010 M10 15 700-010 M10 3
608-372 M10 x 40 3 670-012 M12 5
608-374 M10 x 50 2

020-129 Contains 235 pcs, 5 sizes 020-130 Contains 300 pcs, 5 sizes 020-131 Contains 250 pcs, 5 sizes
FLAT WASHERS LOCK WASHERS SPRING WASHERS
Part No. Size Qty Part No. Size Qty Part No. Size Qty
730-004 4 mm 75 740-004 4 mm 50 024-344 4 mm 50
730-005 5 mm 75 740-005 5 mm 75 024-345 5 mm 50
730-006 6 mm 50 740-006 6 mm 75 024-346 6 mm 50
730-008 8 mm 25 740-008 8 mm 75 024-348 8 mm 50
730-010 10 mm 10 740-010 10 mm 25 024-350 10 mm 50

1.800.268.4000 www.hpaulin.com
 20

METRIC GARAGE ASSORTMENTS

ASSORTMENTS

ASSORTIMENTS POUR GARAGE MTRIQUE

Most popular METRIC FASTENERS packed in divided plastic containers.

020-132 Contains 33 pcs, 14 sizes 020-133 Contains 210 pcs, 10 sizes 020-134 Contains 275 pcs, 5 sizes
SOCKET SET SCREWS MACHINE SCREWS & NUTS COTTER PINS
Part No. Size Qty Part No. Size Qty Part No. Size Qty
024-904 M4 x 5 3 771-132 M4 x 6 20 752-006 1.5 x 16 75
024-907 M4 x 10 4 771-136 M4 x 12 15 752-015 2 x 20 75
024-910 M5 x 10 3 771-197 M5 x 10 20 752-024 3 x 25 50
024-913 M5 x 16 4 771-201 M5 x 16 15 752-027 3 x 40 50
024-916 M6 x 8 4 771-266 M6 x 10 10 752-037 4 x 50 25
024-919 M6 x 12 3 771-270 M6 x 16 15
024-922 M6 x 20 1 771-272 M6 x 20 10
024-926 M8 x 8 3 670-004 M4 35
024-930 M8 x 12 3 670-005 M5 35
024-934 M8 x 20 1 670-006 M6 35
024-981 2 mm S 1
024-982 2.5 mm S 1
024-983 M3 1
024-984 M4 1

020-135 Contains 56 pcs, 7 sizes

SLOTTED SPRING PINS
Part No. Size Qty Part No. Size Qty
024-734 2 x 16 10 024-755 5 x 36 8
024-737 2.5 x 18 10 024-758 5 x 50 5
024-743 3 x 40 10 024-764 6 x 50 5
024-746 4 x 18 8

UTILITY ASSORTMENTS
ASSORTIMENTS UTILITAIRES

Contains 100 pcs, 10 sizes Contains 160 pcs, 13 sizes

020-311 Contains 40 pcs, 8 sizes 020-425 Fine & Extra Fine Thread Series 020-426 COARSE Thread Series
WHEEL NUTS METRIC CAP SCREWS & NUTS METRIC CAP SCREWS & NUTS
Part No. Size Qty Part No. Size Qty Part No. Size Qty
558-014 7/16-20 R REG 5 609-322 M8 x 40 10 608-203 M5 x 20 5
558-016 1/2-20 R REG 5 610-374 M10 x 50 10 608-272 M6 x 20 10
558-027 1/2-20 R REG 5 609-374 M10 x 50 10 608-276 M6 x 30 10
558-044 5/8-18 R REG 5 610-418 M12 x 50 10 608-316 M8 x 20 10
558-047 9/16-18 R REG 5 609-418 M12 x 50 10 608-320 M8 x 30 15
558-100 9/16-18 R REG 5 670-208 M8 x 1 10 608-322 M8 x 40 10
559-125 M12-1.25 REG 5 670-750 M10 x 1 10 608-372 M10 x 40 15
559-150 M12-1.5 REG 5 670-210 M10 x 1.25 10 608-416 M12 x 40 5
For a complete listing of Metric Wheel Bolts 670-765 M12 x 1.25 10 670-005 M5 5
and Nuts see current Wheel Parts Catalogue 670-212 M12 x 1.5 10 670-006 M6 20
670-008 M8 35
670-010 M10 15
670-012 M12 5

H. Paulin & Co., a division of The Hillman Group Canada ULC

 21

MASTER ASSORTMENTS

ASSORTMENTS
ASSORTIMENTS GNRAUX
Most popular INCH AND METRIC FASTENERS packed in durable steel
merchandisers with illustrated lid labels.
020-611 Contains 136 pcs, 20 sizes
BUMPER BAR BOLTS
Part No. Size Qty
245-154 5/16-18 x 1 1/4 4
245-160 3/8 - 16 x 3/4 6
245-161 3/8 - 16 x 3/4 6
245-164 3/8 - 16 x 1 6
245-165 3/8 - 16 x 1 6
020-728 245-167 3/8 - 16 x 1 1/4 6
245-172 7/16 - 14 x 1 1/4 4
245-173 7/16 - 14 x 1 1/2 8
245-175 7/16 - 14 x 2 3
245-182 1/2-13 x 1 1/4 3
245-183 1/2-13 x 1 1/2 3
245-184 1/2-13 x 1 3/4 2
245-220 M8 - 1.25 x 25 mm 6
245-221 M8 - 1.25 x 30 mm 6
700-008 M8 12
117-516 5/16 - 18 4
117-518 3/8 - 16 30
117-520 7/16 - 14 14
117-522 1/2 - 13 8
020-630 Contains 126 pcs, 22 sizes 020-658 Contains 125 pcs, 20 sizes 020-661 Contains 350 Screws, 16 sizes
DRAIN PLUGS & GASKETS WHEEL BOLTS & NUTS CHROME TRIM SCREWS
Part No. Size Qty Part No. Size Qty Part No. Size Qty
263-710 1/2-20 6 560-103 1/2 - 20R x 1 1/2 5 229-806 6 x 3/4 15
263-816 9/16 3 560-114 7/16 - 20R x 1 1/2 5 229-811 8 x 3/4 40
263-718 1/2-20 3 560-138 1/2 - 20R x 1 5/8 5 229-815 8x1 40
263-875 12 mm x 25 mm 11 560-148 1/2 - 20R x 113/16 5 229-819 8 x 1-1/4 20
263-908 M12 - 1.75 3 560-155 1/2 - 20R x 1 5/8 5 229-833 10 x 3/4 30
263-913 M12 - 1.25 6 560-167 1/2 - 20R x 115/16 5 229-837 10 x 1 30
263-815 31/64 x 3/4 8 560-172 1/2 - 20R x 1 7/8 5 229-985 8 x 3/4 20
263-919 M12 - 1.75 3 560-173 1/2 - 20R x 1 3/4 5 229-986 8x1 20
263-929 M12 - 1.75 2 560-386 7/16 - 20R x 15/16 5 230-203 4.2 x 13 mm 5
263-923 M14 - 1.5 3 561-108 M12 - 1.5R x 38.5 mm 5 230-205 4.2 x 20 mm 5
263-925 M14 - 1.5 3 561-109 M12 - 1.5R x 40 mm 5 230-206 4.2 x 20 mm 10
263-885 1/2, M12 S.O. 8 561-110 M12 - 1.5R x 43 mm 10 230-207 4.2 x 20 mm 10
263-914 14 mm x 1.5 STD 12 561-122 M12 - 1.5R x 36 mm 5 230-301 4.2 x 8 mm 30
263-870 14 mm x 20 mm 8 561-154 M12 - 1.5R x 36 mm 5 230-302 4.2 x 12 mm 30
263-856 19/32(14 mm) 8 561-248 M12 - 1.5R x 43 mm 5 230-304 4.2 x 16 mm 30
263-917 14 mm x 1.5 3 561-251 M12 - 1.5R x 51 mm 5 230-305 4.2 x 20 mm 15
263-876 9/16 (14 mm) 11 558-014 7/16 - 20 R REG 10
263-912 12 mm x 1.25 6 558-016 1/2 - 20 R REG 10 020-674 Contains 325 pcs, 26 sizes
263-911 12 mm x 1.75 STD 3 558-027 1/2 - 20 R REG 10 PALNUT FASTENERS
263-844 M14, 1/2 T.O. 8 559-150 M12 - 1.5 REG 10 Part No. Size Qty
263-817 5/8 5 242-016 5/16 - 24 13
263-869 12 mm S.O. 3 242-018 3/8 - 24 10
242-108 8 - 32 13
242-110 10 - 24 20
Contains 120 pcs, 16 sizes 242-114 1/4 - 20 20
020-666 Standard & Cup Types 020-669 Contains 241 pcs, 11 sizes 242-116 5/16 - 18 10
EXPANSION PLUGS 6-LOBE TRIM SCREWS 242-206 1/8 8
242-208 5/32 8
Part No. Size Qty Part No. Size Qty 242-210 3/16 15
261-024 24 mm 6 231-205 4.2 x 20 mm 40 242-214 1/4 13
261-046 35 mm 10 231-206 4.2 x 20 mm 40 242-216 5/16 10
261-090 52 mm 6 231-209 4.2 x 30 mm 20 242-314 1/4 15
261-105 12 mm 4 231-210 4.2 x 30 mm 20 242-316 5/16 15
261-107 14 mm 4 231-213 4.2 x 40 mm 10 242-318 3/8 15
261-126 25 mm 8 231-219 4.2 x 55 mm 10 242-406 1/8 10
261-138 30 mm 5 231-251 4.2 x 20 mm 35 242-408 5/32 10
261-145 34 mm 12 231-252 4.2 x 20 mm 35 242-410 3/16 15
261-146 35 mm 8 231-257 4.2 x 35 mm 15 242-413 .240 10
261-161 40 mm 12 231-264 4.2 x 50 mm 15 243-004 M4 10
243-106 M6 13
261-165 41 mm 16 231-982 T-15 1
243-204 4 mm 13
261-177 45 mm 4 243-306 M6 13
261-181 47 mm 3 243-308 M8 13
261-184 49.5 mm 5 243-310 M10 10
261-185 50 mm 14 243-404 M4 13
261-170 42.3 mm 3 243-405 M5 10

1.800.268.4000 www.hpaulin.com
 22

MASTER ASSORTMENTS
ASSORTMENTS

ASSORTIMENTS GNRAUX
Most popular METRIC FASTENERS packed in durable steel merchandisers with illustrated lid labels.
Contains 160 pcs, 16 sizes 020-693
020-685 Inch & Metric Fittings 020-692 Contains 100 pcs, 20 sizes Contains 120 pcs, 20 sizes
GREASE FITTINGS BUMPER BAR BOLTS PLASTI-RIVETS
Part No. Size Qty Part No. Size Qty Part No. Size Qty
904-610 1/8 STR 10 240-614 1/4 - 20 5 247-300 5 mm x 6 mm 10
904-688 1/8 45 10 240-615 1/4 - 20 5 247-301 6.3 mm x 10 mm 10
904-612 1/8 65 10 240-616 5/16 - 18 10 247-302 6.3 mm x 6 mm 10
904-613 1/8 90 10 240-617 5/18 - 18 5 247-303 6.3 mm x 10 mm 10
904-641 1/4 - 28 STR 10 240-618 3/8 - 16 5 247-304 6.6 mm x 5 mm 10
904-652 1/4 - 28 STR L 10 240-619 3/8 - 16 10 247-305 6.6 mm x 5 mm 10
904-636 1/4 - 28 45S 10 240-706 #6 2 247-306 5 mm x 4.5 mm 10
904-691 1/4 - 28 90 10 240-708 #8 2 247-307 5 mm x 10 mm 10
904-701 6 mm x 1 STR 10 240-709 #8 3 247-401 GM 5
904-745 6 mm x 1 45 10 240-710 #10 3 247-402 GM 5
904-790 6 mm x 1 90 10 240-714 #14 3 247-403 GM 5
904-702 8 mm x 1 STR 10 240-715 #14 2 247-405 GM 5
904-746 8 mm x 1 45 10 241-604 M4 x .7 2 247-406 GM, FORD 5
904-791 8 mm x 1 90 10 241-605 M4 x .7 3 247-407 GM 5
904-703 10 mm x 1 STR 10 241-606 M6 x 1.0 5 247-411 GM 5
904-747 10 mm 5 241-607 M6 x 1.0 5 247-462 FORD 10
904-792 10 mm THREAD 5 241-608 M8 x 1.25 10 247-464 FORD 5
241-609 M8 x 1.25 10 247-466 FORD 10
241-610 M10 x 1.5 5 247-467 FORD 5
241-612 M6.3 x 1.0 5 247-468 FORD 5
020-695 Contains 190 pcs, 20 sizes 020-725 Contains 562 pcs, 18 sizes 020-726 Contains 186 pcs, 18 sizes
10.9 FLANGE HEX BOLT IFI STD ZINC CAP SCREWS & NUTS CAP SCREWS & NUTS
Part No. Size Qty Part No. Size Qty Part No. Size Qty
611-270 M6 x 1.0 x 16 10 608-139 M4 x 16 25 608-311 M8 x 12 8
611-274 M6 x 1.0 x 25 10 608-198 M5 x 12 25 608-314 M8 x 16 9
611-276 M6 x 1.0 x 30 10 608-201 M5 x 16 30 608-316 M8 x 20 10
611-278 M6 x 1.0 x 40 10 608-203 M5 x 20 30 608-318 M8 x 25 10
611-316 M8 x 1.25 x 20 10 608-205 M5 x 25 25 608-320 M8 x 30 8
611-318 M8 x 1.25 x 25 10 608-267 M6 x 12 20 608-322 M8 x 40 6
611-322 M8 x 1.25 x 40 5 608-270 M6 x 16 25 608-324 M8 x 50 4
611-324 M8 x 1.25 x 50 5 608-272 M6 x 20 25 608-326 M8 x 60 3
611-326 M8 x 1.25 x 60 5 608-274 M6 x 25 25 608-328 M8 x 70 3
611-366 M10 x 1.25 x 20 5 608-276 M6 x 30 15 608-370 M10 x 30 6
611-368 M10 x 1.25 x 25 5 608-277 M6 x 35 5 608-372 M10 x 40 6
611-370 M10 x 1.25 x 30 5 608-279 M6 x 45 5 608-374 M10 x 50 4
611-371 M10 x 1.25 x 35 5 670-004 M4 25 608-376 M10 x 60 3
611-372 M10 x 1.25 x 40 5 670-005 M5 110 608-378 M10 x 70 3
611-373 M10 x 1.25 x 45 5 670-006 M6 112 670-008 M8 61
611-374 M10 x 1.25 x 50 5 700-004 M4 20 670-010 M10 22
611-376 M10 x 1.25 x 60 5 700-005 M5 20 700-008 M8 10
244-986 M6 x 1.0 25 700-006 M6 20 700-010 M10 10
244-987 M8 x 1.25 25
244-998 M10 x 1.25 25
020-727 Contains 1000 pcs, 15 sizes 020-728 Contains 384 pcs, 24 sizes
FLAT, SPRING & LOCK WASHERS SOCKET SET SCREWS & KEYS
Part No. Size Qty Part No. Size Qty
730-004 4 mm 100 024-981 M2 1
730-005 5 mm 100 024-982 M2.5 1
730-006 6 mm 100 024-983 M3 1
730-008 8 mm 75 024-984 M4 1
730-010 10 mm 50 024-204 M4 40
740-004 4 mm 100 024-205 M5 40
740-005 5 mm 100 024-206 M6 60
740-006 6 mm 125 024-406 M4 x 6 20
740-008 8 mm 75 024-412 M4 x 12 20
740-010 10 mm 50 024-420 M5 x 10 20
024-324 M4 25 024-426 M5 x 16 20
024-325 M5 25 024-430 M6 x 10 20
024-326 M6 25 024-436 M6 x 16 20
024-328 M8 25 024-440 M6 x 20 20
024-330 M10 25 024-904 M4 x 5 10
024-907 M4 x 10 10
024-910 M5 x 10 10
024-913 M5 x 16 10
024-916 M6 x 8 10
024-919 M6 x 12 10
024-922 M6 x 20 10
024-926 M8 x 8 10
024-930 M8 x 12 10
024-934 M8 x 20 10

H. Paulin & Co., a division of The Hillman Group Canada ULC

 23

MASTER ASSORTMENTS

ASSORTMENTS
ASSORTIMENTS GNRAUX
Most popular METRIC FASTENERS packed in durable steel merchandisers with illustrated lid labels.

020-729 Contains 835 pcs, 16 sizes 020-730 Contains 130 pcs, 20 sizes
COTTER PINS & SLOTTED SPRING PINS CAP SCREWS & NUTS (FINE & EXTRA FINE THREAD)
Part No. Size Qty Part No. Size Qty
024-704 M1.5 x 16 CP 150 610-366 M10 x 1.0 x 20 mm 4
024-707 M2 x 20 CP 200 610-368 M10 x 1.0 x 25 mm 4
024-710 M3 x 25 CP 100 610-372 M10 x 1.0 x 40 mm 4
024-713 M3 x 40 CP 150 610-374 M10 x 1.0 x 50 mm 4
024-716 M4 x 50 CP 75 610-414 M12 x 1.25 x 30 mm 3
610-416 M12 x 1.25 x 40 3
024-734 M2 x 16 SP 20
610-418 M12 x 1.25 x 50 mm 3
024-737 M2.5 x 18 SP 20 670-750 M10 x 1 16
024-740 M3 x 24 SP 20 670-765 M12 x 1.25 9
024-743 M3 x 40 SP 15 609-320 M8 x 1.0 x 30 mm 5
024-746 M4 x 18 SP 20 609-324 M8 x 1.0 x 50 mm 5
024-749 M4 x 36 SP 15 609-368 M10 x 1.25 x 25 mm 5
024-752 M4 x 50 SP 10 609-370 M10 x 1.25 x 30 mm 5
024-755 M5 x 36 SP 15 609-372 M10 x 1.25 x 40 mm 5
024-758 M5 x 50 SP 10 609-374 M10 x 1.25 x 50 mm 5
024-761 M6 x 22 SP 10 609-416 M12 x 1.5 x 40 mm 5
024-764 M6 x 50 SP 5 609-418 M12 x 1.5 x 50 mm 5
670-208 M8 x 1 10
670-210 M10 x 1.25 20
670-212 M12 x 1.5 10
STAX-SIX CABINET
CABINET STAX-SIX
The modern method of stocking Master Assortments.
Each steel STAX-SIX Cabinet holds six Master Assortments in its own rigid drawer slide.

STAX-SIX No. 022-091

Heavy gauge steel construction.
Baked black enamel finish.
Rigid drawer slide.
No-spill feature.
Size: 15-1/4 W
x 15-1/2 H
x 11-3/4 D

Assortments not included

1.800.268.4000 www.hpaulin.com
 24

METRIC MERCHANDISERS
MERCHANDISERS

PRSENTOIRS MTRIQUE

n Sturdy, heavy gauge, reinforced steel cabinet

n Use on work bench or hang on wall
n Colourful - Durable - Efficient
n Includes handy bolt measuring gauge

022-065 14-3/4 H x 18-1/2 W

METRIC FINE THREAD METRIC ISO COARSE PLATED METRIC FASTENERS

MERCHANDISER THREAD MERCHANDISER MERCHANDISER
022-062 022-065 022-066
35 sizes of Metric Fine and Extra Fine 35 best sizes of Metric Coarse Thread 35 sizes of Metric Machine Screws, Lock
Cap Screws, Nuts and Lock Washers. Cap Screws, Nuts and Washers. Washers and Nuts, Spring Washers,
Cotter Pins and Socket Screws.
Contains 436 pcs Contains 567 pcs Contains 1282 pcs
CAP SCREWS - FINE CAP SCREWS - ISO COARSE MACHINE SCREWS
Part No. Size Qty Part No. Size Qty Part No. Size Qty
024-120 M8 x 20 7 024-002 M4 x 16 16 024-406 M4 x 6 81
024-122 M8 x 30 7 024-013 M5 x 16 19 024-412 M4 x 12 72
024-420 M5 x 10 54
024-124 M8 x 40 6 024-014 M5 x 20 17
024-426 M5 x 16 45
024-126 M8 x 50 5 024-015 M5 x 25 16 024-436 M6 x 16 80
024-130 M10 x 20 4 024-023 M6 x 12 21 024-440 M6 x 20 27
024-131 M10 x 25 3 024-024 M6 x 16 18 LOCK NUTS
024-132 M10 x 30 3 024-025 M6 x 20 17 Part No. Size Qty
024-134 M10 x 40 3 024-026 M6 x 25 15 024-224 M4 10
024-136 M10 x 50 3 024-027 M6 x 30 13 024-225 M5 9
024-138 M10 x 60 2 024-030 M6 x 45 9 024-226 M6 9
024-228 M8 6
024-144 M12 x 30 3 024-045 M8 x 12 9 024-230 M10 5
024-146 M12 x 40 2 024-046 M8 x 16 9 LOCK WASHERS
024-148 M12 x 50 2 024-047 M8 x 20 9 Part No. Size Qty
CAP SCREWS - EXTRA FINE 024-048 M8 x 25 9 024-324 4 mm 80
Part No. Size Qty 024-049 M8 x 30 8 024-325 5 mm 80
024-170 M10 x 20 4 024-051 M8 x 40 6 024-326 6 mm 60
024-171 M10 x 25 3 024-053 M8 x 50 5 024-328 8 mm 40
024-330 10 mm 32
024-172 M10 x 30 3 024-055 M8 x 60 4
SPRING WASHERS
024-174 M10 x 40 3 024-057 M8 x 70 3
Part No. Size Qty
024-176 M10 x 50 3 024-062 M10 x 30 4
024-344 4 mm 99
024-184 M12 x 30 2 024-064 M10 x 40 4 024-345 5 mm 77
024-186 M12 x 40 2 024-066 M10 x 50 3 024-346 6 mm 63
024-188 M12 x 50 2 024-068 M10 x 60 3 024-348 8 mm 54
HEX NUTS - FINE 024-070 M10 x 70 3 024-350 10 mm 32
Part No. Size Qty FLAT WASHERS COTTER PINS
024-258 M8 x 1.00 16 Part No. Size Qty Part No. Size Qty
024-260 M10 x 1.25 12 024-304 4 mm 60 024-704 1.5 x 16 80
024-707 2 x 20 36
024-262 M12 x 1.5 7 024-305 5 mm 56 024-713 3 x 40 35
HEX NUTS - FINE 024-306 6 mm 45 024-716 4 x 50 16
Part No. Size Qty 024-308 8 mm 18 SOCKET SCREWS
024-270 M10 x 1.00 10 024-310 10 mm 14 Part No. Size Qty
024-272 M12 x 1.25 7 HEX NUTS - COARSE 024-907 M4 x 10 6
CAP SCREWS - EXTRA FINE Part No. Size Qty 024-910 M5 x 10 6
Part No. Size Qty 024-204 M4 33 024-916 M6 x 8 5
024-919 M6 x 12 5
024-324 4 mm 80 024-205 M5 33
024-930 M8 x 12 3
024-325 5 mm 80 024-206 M6 33 SPRING PINS
024-326 6 mm 60 024-208 M8 18 Part No. Size Qty
024-328 8 mm 40 024-210 M10 11 024-734 2 x 16 27
024-330 10 mm 32 024-212 M12 6 024-740 3 x 24 20
024-332 12 mm 20 024-749 4 x 36 14
024-758 5 x 50 8
024-764 6 x 50 6

H. Paulin & Co., a division of The Hillman Group Canada ULC

 25

METRIC MERCHANDISERS

MERCHANDISERS
PRSENTOIRS MTRIQUE

No. 022-068
Assortment contains 110 of our
most popular 8.8 Metric Cap Screws,
Coarse, Fine and Extra Fine Thread,
Cotter Pins and Machine Screws.
Note: Metric Handy-Paks contents are based on
Dealer prices currently in effect and are subject to
change.

CAP SCREWS - ISO COARSE

Part No. Size Pcs/Pack Packs
024-170 M10 x 20 4 2
024-171 M10 x 25 3 2
024-172 M10 x 30 3 2
024-174 M10 x 40 3 2
024-176 M10 x 50 3 2
024-184 M12 x 30 2 2
024-186 M12 x 40 2 2
024-188 M12 x 50 2 2
MACHINE SCREWS
024-430 M6 x 10 30 2
024-436 M6 x 16 80 2
024-440 M6 x 20 27 2
68H x 32 W x 15 D HEX NUTS - FINE
024-258 M8 x 1.00 16 2
024-260 M10 x 1.25 12 2
024-262 M12 x 1.5 7 2
HEX NUTS - EXTRA FINE
CAP SCREWS - ISO COARSE 024-270 M10 x 1.00 10 2
024-272 M12 x 1.25 7 2
Part No. Size Pcs/Pack Packs Part No. Size Pcs/Pack Packs
024-002 M4 x 16 16 2 024-050 M8 x 35 7 4 HEX NUTS - ISO COARSE
024-004 M4 x 25 11 2 024-051 M8 x 40 6 4 024-204 M4 33 3
024-012 M5 x 12 25 2 024-052 M8 x 45 5 2 024-205 M5 33 3
024-013 M5 x 16 19 2 024-053 M8 x 50 5 4 024-206 M6 33 8
024-014 M5 x 20 17 2 024-055 M8 x 60 4 2 024-208 M8 18 8
024-015 M5 x 25 16 2 024-057 M8 x 70 3 2 024-210 M10 11 7
024-023 M6 x 12 21 2 024-060 M10 x 20 5 4 024-212 M12 6 3
024-024 M6 x 16 18 4 024-061 M10 x 25 4 8 LOCK NUTS
024-025 M6 x 20 17 8 024-062 M10 x 30 4 8
024-026 M6 x 25 15 8 024-063 M10 x 35 4 4 024-224 M4 10 2
024-027 M6 x 30 13 4 024-064 M10 x 40 4 4 024-226 M6 9 2
024-028 M6 x 35 10 4 024-066 M10 x 50 3 4 024-228 M8 6 2
024-029 M6 x 40 10 4 024-068 M10 x 60 3 2 024-230 M10 5 2
024-030 M6 x 45 9 2 024-070 M10 x 70 3 2 FLAT WASHERS
024-031 M6 x 50 9 2 024-075 M12 x 30 3 3 024-304 4 mm 60 3
024-045 M8 x 12 9 2 024-077 M12 x 40 3 3 024-305 5 mm 56 3
024-046 M8 x 16 9 4 024-079 M12 x 50 3 3 024-306 6 mm 45 6
024-047 M8 x 20 9 8 024-081 M12 x 60 2 2 024-308 8 mm 18 6
024-048 M8 x 25 9 8 024-083 M12 x 70 2 2 024-310 10 mm 14 6
024-049 M8 x 30 8 4 024-312 12 mm 12 3
CAP SCREWS - FINE
LOCK WASHERS
024-120 M8 x 20 7 2 024-133 M10 x 35 4 2
024-122 M8 x 30 7 2 024-134 M10 x 40 3 2 024-324 4 mm 80 3
024-124 M8 x 40 6 2 024-136 M10 x 50 3 2 024-325 5 mm 80 3
024-126 M8 x 50 5 2 024-138 M10 x 60 2 2 024-326 6 mm 60 6
024-130 M10 x 20 4 2 024-144 M12 x 30 3 2 024-328 8 mm 40 6
024-131 M10 x 25 3 2 024-146 M12 x 40 2 2 024-330 10 mm 32 6
024-132 M10 x 30 3 2 024-148 M12 x 50 2 2 024-332 12 mm 20 3

1.800.268.4000 www.hpaulin.com
 26

METRIC HANDY-PAKS
COMPLETE LISTING OF METRIC HANDY-PAKS

HANDY-PAKS MTRIQUE
CLASS 8.8 COARSE HEX HEAD CAP SCREWS CLASS 8.8 FINE THREAD HEX HEAD CAP SCREWS
Handy-Pak Handy-Pak Handy-Pak Handy-Pak Handy-Pak
Size Size Size Size Size
No. No. No. No. No.
024-002 M4 x 16* 024-031 M6 x 50 024-062 M10 x 30* 024-120 M8 x 1.0 x 20* 024-133 M10 x 1.25 x 35*
024-004 M4 x 25 024-045 M8 x 12* 024-063 M10 x 35* 024-122 M8 x 1.0 x 30* 024-134 M10 x 1.25 x 40*
024-012 M5 x 12* 024-046 M8 x 16* 024-064 M10 x 40 024-124 M8 x 1.0 x 40* 024-136 M10 x 1.25 x 50*
024-013 M5 x 16* 024-047 M8 x 20* 024-066 M10 x 50 024-126 M8 x 1.0 x 50* 024-138 M10 x 1.25 x 60
024-014 M5 x 20* 024-048 M8 x 25* 024-068 M10 x 60 024-130 M10 x 1.25 x 20* 024-144 M12 x 1.5 x 30*
024-015 M5 x 25* 024-049 M8 x 30* 024-070 M10 x 70 024-131 M10 x 1.25 x 25* 024-146 M12 x 1.5 x 40*
024-023 M6 x 12* 024-050 M8 x 35 024-075 M12 x 30* 024-132 M10 x 1.25 x 30* 024-148 M12 x 1.5 x 50*
024-024 M6 x 16* 024-051 M8 x 40 024-077 M12 x 40* CLASS 8.8 EXTRA FINE THREAD HEX HEAD CAP SCREWS
024-025 M6 x 20* 024-052 M8 x 45 024-079 M12 x 50 Handy-Pak Handy-Pak
Size Size
024-026 M6 x 25* 024-053 M8 x 50 024-081 M12 x 60 No. No.
024-027 M6 x 30 024-055 M8 x 60 024-083 M12 x 70 024-170 M10 x 1.0 x 20* 024-176 M10 x 1.0 x 50*
024-028 M6 x 35 024-057 M8 x 70 Thread Length: 024-171 M10 x 1.0 x 25* 024-184 M12 x 1.25 x 30*
Formula is 2D + 6 mm.
024-029 M6 x 40 024-060 M10 x 20* Items marked * are fully 024-172 M10 x 1.0 x 30* 024-186 M12 x 1.25 x 40*
024-030 M6 x 45 024-061 M10 x 25* threaded. 024-174 M10 x 1.0 x 40* 024-188 M12 x 1.25 x 50*

CLASS 8 COARSE HEX NUTS NYLON COLLAR STOP NUTS POZI-LOK NUTS
Handy-Pak Handy-Pak Handy-Pak Handy-Pak Handy-Pak Handy-Pak
Size Size Size Size Size Size
No. No. No. No. No. No.
024-204 M4 024-206 M6 024-210 M10 024-224 M4 024-226 M6 024-230 M10
024-205 M5 024-208 M8 024-212 M12 024-225 M5 024-228 M8

CLASS 8 FINE AND EXTRA FINE THREAD HEX NUTS FLAT WASHERS
Handy-Pak Handy-Pak Handy-Pak Handy-Pak Handy-Pak
Size Size Size Size Size
No. No. No. No. No.
024-258 M8 x 1.0 024-270 M10 x 1.0 024-304 4 mm 024-306 6 mm 024-310 10 mm
024-260 M10 x 1.25 024-272 M12 x 1.25 024-305 5 mm 024-308 8 mm 024-312 12 mm
024-262 M12 x 1.5
SPRING (WAVE TYPE) WASHERS (PLAIN FINISH)
LOCK WASHERS Handy-Pak
Size
Handy-Pak
Size
Handy-Pak
Handy-Pak
Handy-Pak No. No.
Size Size Size
No. No. No. 024-344 4 mm 024-348 8 mm
024-324 4 mm 024-326 6 mm 024-330 10 mm 024-345 5 mm 024-350 10 mm
024-325 5 mm 024-328 8 mm 024-332 12 mm 024-346 6 mm

MACHINE SCREWS PAN PHILLIPS HEAD COTTER PINS

Handy-Pak Handy-Pak Handy-Pak Handy-Pak
Size Size Size Size
No. No. No. No.
024-398 M3-0.5 x 6 024-421 M5-0.8 x 12 024-704 M1.5 x 16 024-713 M3 x 40
024-399 M3-0.5 x 10 024-422 M5-0.8 x 20 024-707 M2.0 x 20 024-716 M4 x 50
024-400 M3-0.5 x 16 024-423 M5-0.8 x 25 024-710 M3 x 25
024-401 M3-0.5 x 20 024-424 M5-0.8 x 30
024-402 M3-0.5 x 25 024-425 M5-0.8 x 35 SLOTTED SPRING PINS (PLAIN FINISH)
024-403 M3-0.5 x 30 024-426 M5-0.8 x 16 Handy-Pak Handy-Pak
Size Size
No. No.
024-404 M3-0.5 x 35 024-427 M5-0.8 x 40
024-405 M3-0.5 x 50 024-428 M5-0.8 x 50 024-734 M2.0 x 16 024-752 M4 x 50
024-406 M4-0.7 x 6 024-429 M6-1.0 x 8 024-737 M2.5 x 18 024-755 M5 x 36
024-407 M4-0.7 x 10 024-430 M6-1.0 x 10 024-740 M3.0 x 24 024-758 M5 x 50
024-410 M4-0.7 x 16 024-432 M6-1.0 x 12 024-743 M3.0 x 40 024-761 M6 x 22
024-411 M4-0.7 x 20 024-436 M6-1.0 x 16 024-746 M4 x 18 024-764 M6 x 50
024-412 M4-0.7 x 12 024-440 M6-1.0 x 20 024-749 M4 x 36
024-413 M4-0.7 x 25 024-441 M6-1.0 x 25
024-414 M4-0.7 x 30 024-442 M6-1.0 x 30 SOCKET SCREWS KEYS (PLAIN FINISH)
024-415 M4-0.7 x 35 024-443 M6-1.0 x 35 Handy-Pak Handy-Pak Handy-Pak
Size Size Size
024-416 M4-0.7 x 40 024-444 M6-1.0 x 40 No. No. No.
024-417 M4-0.7 x 50 024-446 M6-1.0 x 50 024-904 M4 x 5 024-916 M6 x 8 024-926 M8 x 8
024-418 M4-0.7 x 60 024-448 M8-1.25 x 12 024-907 M4 x 10 024-919 M6 x 12 024-930 M8 x 12
024-419 M5-0.8 x 6 024-451 M8-1.25 x 30 024-910 M5 x 10 024-922 M6 x 20 024-934 M8 x 20
024-420 M5-0.8 x 10 024-453 M8-1.25 x 40 024-913 M5 x 16

MACHINE SCREWS PAN SLOT HEAD SOCKET SCREWS KEYS (PLAIN FINISH)
Handy-Pak Handy-Pak Handy-Pak Handy-Pak Handy-Pak Handy-Pak
Size Size Size Size Size Size
No. No. No. No. No. No.
024-406 M4 x 6 024-420 M5 x 10 024-430 M6 x 10 024-980 1.5 mm 024-983 3 mm 024-986 6 mm
024-412 M4 x 12 024-426 M5 x 16 024-436 M6 x 16 024-981 2.0 mm 024-984 4 mm 024-988 8 mm
024-440 M6 x 20 024-982 2.5 mm 024-985 5 mm

H. Paulin & Co., a division of The Hillman Group Canada ULC

 27

NOTES

1.800.268.4000 www.hpaulin.com
 Alberta Newfoundland and Labrador Ontario
Prince Edward Island
British Columbia Northwest Territories
Qubec
Manitoba Nova Scotia
Saskatchewan
New Brunswick Nunavut Yukon

Toronto Head Office Montreal Edmonton

H. Paulin & Co., a division of 2591 Rue Debray 11714-180th Street
The Hillman Group Canada ULC Laval, QC H7S 2J4 Edmonton, AB T5S 1N7
55 Milne Avenue Tel: (450) 688-4292 Tel: (780) 450-1346
Toronto, ON M1L 4N3 Fax: (450) 688-4750 Dominion Fittings
Tel: (416) 694-3351 Tel: (780) 450-6017
Fax: (416) 694-1869 Fax: (780) 463-3597

Moncton Winnipeg Vancouver

159 Henri Dunant Street 1670-A Inkster Blvd. 3179 Thunderbird Cres.
Moncton, NB E1E 1E4 Winnipeg, MB R2X 2W8 Burnaby, BC V5A 3G1
Tel: (506) 857-8658 Tel: (204) 694-3802 Tel: (604) 421-3096
Fax: (506) 857-9338 Fax: (204) 694-3804 Fax: (604) 421-3046