BULLETIN 43.

00-2
FEBRUARY 2012

DeZURIK AWWA BUTTERFLY

VALVES TECHNICAL
SPECIFICATIONS
 Materials of Construction
316" (80400mm) 18 & 20" (450 & 500mm)

A6
A6
A8
A8
A7 A1

A7 A5
A1

A4 A10 A2
A2
A5

A11 A3

A3 A12

A32
A32

A16 A16

320" (80500mm) Valve Sizes

Item Description Material
A1 Body Cast Iron ASTM A126 Class B
NBR or EPDMseat is permanently bonded to the body Ductile Iron ASTM A536 Grade 65-45-12
Cast Iron ASTM A48 Class 40C
Ductile Iron ASTM A536 Grade 65-45-12
A2 Disc
316 Stainless Steel, ASTM A743, Type CF8M
A3 Disc Seating Edge 316 Stainless Steel, ASTM A276, Type 316
A4 Tangential Pin 1420" (350500mm) 316 Stainless Steel, ASTM A276, Type 316
(250B) 17-4 PH Stainless Steel, H1100
Shaft 316" (80400mm) 304 Stainless Steel, ASTM A276, Type 304
A5 Upper Shaft 1820" (450600mm) 316 Stainless Steel, ASTM A276, Type 316
17-4 PH Stainless Steel, ASTM A564, Type 630 Condition 1150
A6 Key Steel AISI 1018
Nylon and Molybdenum Disulphite Composition (NBR Seat)
A7 Upper Journal Bearing PTFE (EPDM Seat)
(250B) Teflon/Dacron Fabric Liner, Fiberglass back-up shell
A8 Packing Acrylonitrile Butadiene (NBR Seat)
Ethylene Propylene Diene Terpolymer (EPDM Seat)
A10 Torque Screw 312" (80300mm) 316 Stainless Steel, ASTM A276, Type 316
(250B) 17-4 PH Stainless Steel, Condition 1100
A10 Set Screw 1420" (350500mm) 188 Stainless Steel
304 Stainless Steel, ASTM A276, Type 304
A11 Lower Shaft 1820" (450600mm) 316 Stainless Steel, ASTM A276, Type 316
17-4 PH Stainless Steel, ASTM A564, Type 630 Condition 1150
A12 Set Screw 1820" ( 450500mm) 188 Stainless Steel
38" (80200mm) Carbon Steel, SAE J403, Grade 1008/1010
1020" (250500mm) Malleable Iron, ASTM A47-52 Grade 35018
A16 Plug 320" (80500mm)
(250B, 36" (80150mm)) Carbon Steel, SAE J403, Grade 1008/1010
(250B, 820" (200500mm)) Malleable Iron, ASTM A47-52 Grade 35018
Nylon and Molybdenum Disulphide Composition (NBR Seat)
A32 Lower Journal Bearing PTFE (EPDM Seat)
(250B) Teflon/Dacron Fabric Liner, Fiberglass back-up shell

2 2012 DeZURIK
Materials of Construction
2472" (6001800mm) Valve Sizes 2442" (6001100mm)
Item Description Material A16
See
A1 Body Cast Iron, ASTM A126 Class B Detail E
Ductile Iron, ASTM A536 Grade 65-45-12 A20
A2 Seat Acrylonitrile-Butadiene (NBR)
Terpolymer of Ethylene, Propylene and a Diene (EPDM) A19
A6 Thrust Bearing Cover Cast Iron, ASTM A126 Class B
Ductile Iron, A536 Grade 65-45-12 A17
A7 Screw 18-8 Stainless Steel
A15
A8 O-Ring Acrylonitrile-Butadiene (NBR)
Terpolymer of Ethylene Propylene and a Diene (EPDM)
A13 A14 A33
A9 Thrust Collar Steel, ASTM 108
A10 Set Screw 18-8 Stainless Steel
A11
A11 Disc Cast Iron ASTM A48 Class 40C Seat
Ductile Iron ATM A536 Grade 65-45-12 Side A1
A12 Disc Edge 316 Stainless Steel, ASTM A240, Type 316
A13 Disc Pin 2448" (6001200mm) 304 Stainless Steel, ASTM A276, Type 304
A25
5472" (14001800mm) 303 Stainless Steel, ASTM 582, Type 303
A14 Nut 18-8 Stainless Steel
A30 A31
A15 Upper Shaft 304 Stainless Steel, ASTM A276, Type 304
316 Stainless Steel, ASTM A276, Type 316 See
17-4 PH Stainless Steel, ASTM, Type 630 Condition 1150 Detail A See
A16 Key Steel AISI 1018
Detail B
A17 Bearing Teflon/Dacron Fabric Liner, Fiberglass back-up shell
A19 Packing NBR Acrylonitrile-Butadiene (NBR Seat)
EPDM Ethylene Propylene and a Diene (EPDM Seat)
A20 Spacer 30-48" (7501200mm) 316 Stainless Steel, ASTM A276, Type 316
A22 Gland 60-72" (15001800mm) Bronze ASTM B-62
A23 Screw (Used with A22) 18-8 Stainless Steel 4872" (12001800mm)
A24 Washer (Used with A22) 18-8 Stainless Steel
304 Stainless Steel, ASTM A276, Type 304 A16
A25 Lower Shaft 316 Stainless Steel, ASTM A276, Type 316
17-4 PH Stainless Steel, ASTM, Type 630 Condition 1150 See
Detail E A15
A26 Adjusting Screw 303 Stainless Steel, ASTM A582, Type 303
A27 Jam Nut 18-8 Stainless Steel A20
A29 Thrust Plate Carbon Steel AISI A108
A30 Screw 2448" (6001200mm) 18-8 Stainless Steel A19
A31 Lockwasher 2448" (6001200mm) 18-8 Stainless Steel
A32 Epoxy Epoxy A17
A33 O-Ring Acrylonitrile-Butadiene (NBR)
Terpolymer of Ethylene Propylene and a Diene (EPDM) A13 A33
Contact DeZURIK for materials of construction on valve sizes 78120" (20003000mm).
A14

A12 A11 A11

A27
A23
A1
A32
A8
A24
A2

A22 A29 See

Detail A
A7

A19 A10 A9 A26 A6

A1
A25
Detail E Detail B Detail A
Adjustable Packing See
Optional on 2448" (6001200mm) Detail B
Standard on 5472" (14001800mm)

3
 Cv/Kv Values % Open vs. % Cv/Kv
Class 150B 342" (801100mm) 4872" (12001800mm)
100% Cv/Kv Flat Dome Flat Dome
Valve % Open % Open
Size Flat Dome % Cv/Kv % Cv/Kv % Cv/Kv % Cv/Kv
Cv/Kv Cv/Kv 10 3 3 10 1 2
3" 362 356
80mm 313 308 15 4 4 15 2 2
4" 658 646 20 6 5 20 4 3
100mm 569 559
25 8 7 25 5 4
6" 1,380 1,360
150mm 1,194 1,176 30 10 9 30 6 6
8" 2,440 2,390 35 12 11 35 7 8
200mm 2,111 2,067
10" 3,910 3,840 40 15 14 40 9 10
250mm 3,382 3,322 45 19 18 45 13 14
12" 5,730 5,630
300mm 4,960 4,870 50 23 22 50 15 18

14" 7,840 7,700 55 28 27 55 18 22

350mm 6,782 6,661
60 35 34 60 23 27
16" 10,200 9,980
400mm 8,823 8,633 65 42 41 65 28 33
18" 12,600 12,400 70 49 49 70 35 41
450mm 10,899 10,726
75 55 58 75 44 48
20" 15,800 15,500
500mm 13,667 13,408 80 61 66 80 55 59
24" 22,900 22,500
85 69 75 85 67 71
600mm 19,809 19,463
90 79 87 90 79 84
95 91 98 95 96 96
Class 25A, 75B, 150B
100 100 100 100 100 100
100% Cv/Kv
Valve
Flat Dome Contact DeZURIK for Cv/Kv Values on 78120" (20003000mm) valves and for Class 250B.
Size
Cv/Kv Cv/Kv
30" 36,500 35,900
750mm 31,573 31,054
36" 53,200 52,300
900mm 40,018 45,240
42" 73,100 71,800
1100mm 63,232 62,107
48" 109,000 103,000
1200mm 94,285 89,095
54" 140,000 131,000
1400mm 121,100 113,315
60" 173,000 163,000
1500mm 149,645 140,995
66" 210,000 198,000
1700mm 181,650 171,270
72" 250,000 236,000
1800mm 216,250 204,140

Applicable Standards
DeZURIK AWWA valves are in conformance with the industry standards listed below.
Valves conform to AWWA Standard ANSI/AWWA C-504 for sizes 3" - 72" (80 - 1800mm), Rubber-Seated Butterfly Valves.
Valves conform to AWWA Standard ANSI/AWWA C-516 for sizes 78" and larger (2000mm - larger), Rubber-Seated Butterfly Valves.
Dimensions and drilling of flanged end connections conform to Class 125 sections of ASME/ANSI B16.1, Cast Iron Pipe Flanges and Flanged Fittings.
Mechanical-Joint bell dimensions conform to ANSI/AWWA C111/A21.11, Rubber Gasket Joints for Ductile Iron and Gray Iron Pressure Pipe and Fittings.
Bonding of 3" (80mm) through 20" (600mm) seat conforms to ASTM D429, Standard Test Methods for Rubber Property Adhesion to Rigid Substrates.
Ozone resistance of seat material conforms to ASTM D1149, Standard Test Method for Rubber Deterioration Surface Ozone Cracking in a Chamber.
Seat material volume increase is less than 2% after immersion in distilled water for 70 hours, when tested in accordance with ASTM D471, Standard Test Method for
Rubber Property Effect of Liquids.
Materials conform to standards as listed in the Materials of Construction.

4
Ordering Information
Valve Style
BAW = AWWA Butterfly Valve Packing/Seat Combination
Packing Material
NBRN = Acrylonitrile-Butadiene Self-Adjusting (3" - 144", 80-3600mm)
Valve Size (-20 to 180F)(-29 to 82C)
3" (80mm) 42" (1100mm) NBRA = Acrylonitrile-Butadiene Adjustable (54" - 144",1400-3600mm)
4" (100mm) 48" (1200mm) (-20 to 180F)(-29 to 82C)
6" (150mm) 54" (1400mm) (3" - 48", 80-1200mm) (-20 to 180F)(-29 to 82C)
Do not use with buried service
8" (200mm) 60" (1500mm)
EPDN = EPDM Self-Adjusting (-20 to 290F)(-29 to 143C)
10" (250mm) 66" (1700mm)
324" (80600mm)
12" (300mm) 72" (1800mm)
EPDA = EPDM Adjustable (-20 to 290F)(-29 to 143C)
14" (350mm) 78" (2000mm) 324" (80600mm)
16" (400mm) 84" (2100mm) Do not use with buried service.
18" (450mm) 90" (2300mm) TCN = PTFE Self-Adjusting (-20 to 450F)(-29 to 232C)
20" (500mm) 96" (2400mm) 3144" (803600mm)
24" (600mm) 102" (2600mm) TCA = PTFEAdjustable (-20 to 450F)(-29 to 232C)
28144" (7003600mm)
28" (700mm) 108 (2700mm) Do not use with buried service.
30" (750mm) 114" (2900mm) Seat Material
36" (900mm) 120" (3000mm) NBR = Acrylonitrile-Butadiene (-20 to 180F)(-29 to 82C)
144" (3600mm) (Must use NBRN or NBRA packing.)
EPDM = Terpolymer of Ethylene Propylene & a Diene
Note: All orders for 28" (700mm) and larger must include valve (-20 to 290F)(-29 to 143C)
pipeline mounting position and shaft orientation as second (Must use EPDA or EPDN, TCN or TCA packing.)
line information.

End Connection Class AWWA C-504

F1 = ANSI 125 Flanged 3144" (803600mm)
25A = 2848" (7001200mm) Flanged
F2 = ANSI 250 Flanged 348" (801200mm)
75B = 28144" (7003600mm) Flanged
MJ = Mechanical Joint 448" (1001200mm)
150B = 3144" (803600mm) Flanged
With Mechanical joint ends, buriable actuators are recommended. 448" (1001200mm) Mechanical Joint
250B = 3144" (803600mm) Flanged
448" (1001200mm) Mechanical Joint
Note: Pressure ratings above 150 not available with EPDM Seat on
valves 24" & larger (600mm & larger).
Body Material
C1 = Cast Iron - F1 or MJ
CS = Carbon Steel - F1 (24" & larger, 600mm & larger)
(On Application)
DI = Ductile Iron - F1, F2, or MJ Disc/Shaft Combination
Disc Material
S2 = 316 Stainless Steel - F1 (24" & larger, 600mm & larger)
CI = Cast Iron disc with 316 stainless steel edge
(On Application)
DI = Ductile Iron disc with 316 stainless steel edge

Special Disc Material

S2 = 316 Stainless Steel
CS = Carbon Steel, 24" & larger (600mm & larger) On Application

Shaft & Pin Material
S1 = 304 Stainless Steel shaft
Pin - 316 Stainless Steel on 3"-36" (80-900mm)
304 Stainless Steel on 42"-144" (1100-3600mm)
S5 = 17-4 pH Stainless Steel shaft & pin (must be used with 250B)
S2 = 316 Stainless Steel shaft & pin

Options
BAA = Buy American Act
CMC = Certificate of Material Conformance
ST3 = Pennsylvania Steel Procurement Act
TB = DeZURIK Standard Certified Hydrostatic shell test and
Bi-directional Seat leak test.

Ordering Example:
BAW,24,F1,CI,NBRN-NBR,150B,DI-S1*Actuator

5
 M-Series Manual Actuator
Handwheel

B24 B13 B28

B9 B10 B11 B44 B5 B7 B31 B30 B29 B6
B27

B21

B25

B1

B2 B18
B26 B8 B3 B12 B27 B36 B41

B65
B60
B61

B60
Adaptor for 30 & 36" (750 & 900mm) Lower housing bearing arrangement
valves with adjustable packing. for 30 & 36" (750 & 900mm) valves.
Handwheel actuator for
1420" (350500mm) and
24" (600mm) 75B valves.

M-Series Manual Actuator

Materials of Construction
Item Description Material Item Description Material
B1 Housing Cast Iron, ASTM A126 Class B B35 Collar Steel, AISI 1215
B2 Bearing (Housing) Bronze Oil Impregnated B36 Chainwheel Cast Iron, ASTM A126 Class B
B3 Yoke Ductile Iron, ASTM A536 80-55-06 B38 Chain Guide Cast Iron, ASTM A126 Class B
B5 Yoke Nut Assembly Ductile Iron, ASTM A536 80-55-06 B40 Link Closing Steel Zinc Plated
B6 Shaft Steel, ASTM A29 1144 B41 Pin Steel Zinc Plated
B7 Stop Nut Steel, AISI 1018 B44 Thrust Washer Fiberglass with Steel Zinc
Plated Back (M-7 Actuator)
B8 Bearing Sintered Stainless Steel
B45 Collar Steel, AISI 1215
B9 Collar Steel, AISI 1215
B46 Bearing Bronze Oil Impregnated
B10 Pin Chrome Steel, Type 420
B47 Set Screw Steel Zinc Plated
B11 Thrust Washer Bronze Oil Impregnated
B48 Washer Steel Zinc Plated
B12 Yoke Guide Steel, AISI 1018
B49 Ring Retainer Steel
B13 Guide Block Steel, AISI 1018
(450 ft. lb. Actuator only) B50 Adaptor
A36 1220" (300500mm) Steel Hot Rolled
B18 O-Ring Nitrile
Valves
B21 Bearing Bronze Oil Impregnated
B51 Seal
B24 Screw Zinc Plated Steel 1220" (300500mm) Carbon Steel, Nitrile
(M-7 Actuator only) Valves
B25 Expansion Plug Zinc Plated Steel B55 Bearing (Adaptor Plate) Bronze Oil Impregnated
B26 O-Ring Nitrile B57 Gasket Fiber Non-Asbestos
B27 Pin Zinc Plated Steel B60 Adaptor Steel, ASTM A36
B28 Handwheel Cast Iron, ASTM A126 Class B 30 & 36" (750 & 900mm)

B29 Driver Stainless Steel, 316L B61 O-Ring Nitrile (NBR)

30 & 36" (750 & 900mm)
B30 Pointer Steel 14 Gauge
B62 Shaft Extension Steel, ASTM A36
B31 Seal Steel with Nitrile
B65 Bearing Bronze Oil Impregnated
B34 Wrenching Square Cast Iron, ASTM A126 Class B 30 & 36" (750 & 900mm)

Note: Fasteners are zinc plated steel unless stainless steel bolting is specified.

6
Nut B34 B27

Chainwheel 320" (80500mm)

B9 B10 B50 B41 B35 B11 B44

B47
B36

B46 B45 B51 B56

B57
B38

B49 B48 B27 B40

Chainwheel 2436" (600900mm)

B41 B35 B11 B44

B36 B47 B51 B55 B62

B46 B45

B49 B48 B27 B40 B38

7
 LA-Series Manual Actuator
LA-Series Actuator
Materials of Construction
Item Description Material Item Description Material
B1 Housing Cast Iron, ASTM A126 Class B B48 Bushing Bronze Oil Impregnated
B2 Bearing Bronze Oil Impregnated B50 Chain Guide Cast Iron, ASTM A126
B3 Yoke Ductile Iron, ASTM A536 80-55-06
B51
Closing Link Steel
B4 Cover Steel Plate, A36 HR B52 Collar Steel, ASTM A36
B5 Packing Retainer Steel Plate, A36 HR
B53
Bearing Bronze
B6 Link Steel B54 Screw Steel Zinc Plated
B7 Yoke Nut Ductile Iron, ASTM A536 80-55-06 B55 Washer Steel Zinc Plated
B8 Guide Nut Powder Metal 8020 23B B56 Retaining Ring Carbon Steel
(LA-4 & LA-6) B57 Adaptor Plate Steel, ASTM A36
B9 Retaining Ring Carbon Steel, SAE 1060-1090
B58
Seal Garlock
B10 Input Shaft Steel, AISI 1141
B62
Bearing Bronze
B11 O-Ring Acrylonitrile-Butadiene B63 Gasket Non-Asbestos
B12 O-Ring Acrylonitrile-Butadiene B64 Adaptor Cast Iron, ASTM A126 Class B
B13 Collar Steel, AISI 1215 B65 Gasket Non-Asbestos
B14 Pin Steel B69 Housing (Spur Gear) Cast Iron, ASTM A126
B15 Thrust Washer Teflon/Glass Fabric, B70 Pin (Chainwheel) Steel Zinc Plated
Stainless Steel Backing
B71 Gasket Fiber Non-Asbestos
B16 Thrust Washer Teflon/Glass Fabric,
Stainless Steel Backing B72 Screw Steel Zinc Plated
B17 Bearing Bronze Oil Impregnated B73 Screw Steel Zinc Plated
B18 Expansion Plug Steel Zinc Plated B74 Seal Steel Zinc Plated
B23 Retaining Washer Stainless Steel, Type 18-8 B75 Pin Steel Zinc Plated
B24 Outer Guide Bar Steel, AISI 1018 B76 Pin Steel Zinc Plated
B25 Inner Guide Bar Steel, AISI 1018 B77 Retainer Ring Steel Zinc Plated
B26 Square Nut Steel, AISI 1018 B78 Cover Steel Plate, ASTM A36
B27 Stop Nut Steel, AISI 1018 B81 Gear Carbon Steel
B28 Seal Steel with Nitrile B82 Gear Carbon Steel
B29 Pointer Steel, ASTM A36 B83 Input Shaft (Spur Gear) Steel, ASTM A29
B32 Stud Steel Zinc Plated
B84
O-Ring Nitrile
B33 Nut Steel Zinc Plated B85 Chainwheel Cast Iron, ASTM A126 Class B
B34 Thread Seal Steel with Nitrile B88 Adaptor (Adj. Packing) Steel, ASTM A36
B35 Yoke Cover Steel, ASTM A569
B89
Bearing Bronze
B40 Pin Steel Zinc Plated B90 Shaft Extension Steel, AISI 1215
B43 Handwheel Cast Iron, ASTM A126 Class B B91 Washer Steel Zinc Plated
B44 Position Plate Vinyl B92 Expansion Plug Zinc Plated Steel
B45 Shim Steel B93 Lockwasher Zinc Plated Steel
B47 Expansion Plug Steel Zinc Plated

Note: All fasteners are zinc plated steel unless stainless steel bolting is specified.

Handwheel
B25
B35 B44 B34 B91 B33 B29 B28 B32

B27

B15

B18

B17

B8 B47 B46

B34
B40 B16 B13 B14 B1 B24 B13 B45
Buried
B10 B3 B6 B7 B9 Actuator B43
Cover

8
Chainwheel

B48 B16 B35 B44 B34 B91 B33 B29 B28

B4
B25 B32
B27
B55 B53 B54 B52
B15

B18

B17
B56
B7

B90 B58 B62 B9

B57 B63 B64 B65 B13 B14 B1 B24 B45
B70
B8
B50
B88
B85
B40 B10 B2 B11 B5 B3 B6
B51
Handwheel with Spur Gear Nut
B75 B81 B83 B92
B84 B78
B26 B40
B40
B77

B23 B43

B73

B74

Nut with Spur Gear

B69 B71 B26 B40

B89 B82 B76 B72 B93 B16

Chainwheel with Spur Gear

B63 B89 B75 B81 B83 B92 B25 B58 B62 B40 B84 B78

B90

B57 B64 B65 B50 B77 B23 B69 B71 B48

B85

B82 B76 B72 B93 B16 B51

9
 T-Series Cylinder Actuator
Construction as used with
B3 B35 B24 B11 B19 Water Hydraulic Cylinder

B55 B56
B50 B1 B5 B49

B6 B7 B23

T-Series Actuator
Materials of Construction
Item Description Material
B1 Housing Cast Iron, ASTM A126 Class B
B3 Bearing Bronze
B5 Yoke Cast Ductile Iron, A536
B6 Yoke Nut Cold Rolled Steel
B7 Bearing Sintered Stainless Steel B13 B25 B29 B30
B11 Stop Nut Cold Rolled Steel
B13 Guide Rail Cold Rolled Steel
B19 Gasket Neoprene Pneumatic/Low Pressure Oil Hydraulic
B23 Lower Yoke Guide (TW-7 only) Steel, AISI 1215
Standard and C-540
B24 Upper Yoke Guide (TW-7 only) Steel, ASTM A366
B25 Guide Rail (TW-7 only) Steel, ASTM A36 C9 C10
B29 Gasket Neoprene
B30 Cap Fiberglass C18 C17
B35 Stay Pin Steel
B49 Screw Alloy Steel
B50 Key Steel, AISI 1018
B55 Adaptor (Hydraulic only) Cast Iron, ASTM A126 Class B
B56 Wiper (Hydraulic only) Carbon Steel C16

Note: A
 ll fasteners are zinc plated steel unless stainless steel bolting C11
is specified.
C12

C19
C13 C15 C14 C8 C7 C6 C3 C1 C2 C4
Pneumatic/Low Pressure Oil Hydraulic Cylinder
Materials of Construction
Item Description Standard Construction C-540 Construction
C1 Cylinder Head Cast Iron, ASTM A126 Class B Ductile Iron, ASTM A536 65-45-12
C2 Bearing Bronze Oil Impregnated Bronze Oil Impregnated
C3 Rod Seal Teflon with NBR Teflon with NBR
C4 Piston Rod Steel, AISI 1215 Chrome Plated Steel, AISI 1215 Chrome Plated
C6 O-Ring Acrylonitrile-Butadiene Acrylonitrile-Butadiene
C7 Cylinder Tube Fiberglass Fiberglass
C8 Piston Cast Iron, ASTM A126 Class B Cast Iron, ASTM A126 Class B
C9 O-Ring Acrylonitrile-Butadiene Acrylonitrile-Butadiene
C10 Piston Seal Virgin Teflon Virgin Teflon
C11 Nut Zinc Plated Steel Zinc Plated Steel
C12 Cylinder Cap Ductile Iron, ASTM A536 65-45-12 Ductile Iron, ASTM A536 65-45-12
C13 Tie Rod Zinc Plated Steel Steel, AISI C1018 Zinc Plated
C14 Washer Zinc Plated Steel Zinc Plated Steel
C15 Nut Zinc Plated Steel Zinc Plated Steel
C16 Seal Thread Steel with Nitrile Steel with Nitrile
C17 Jam Nut Zinc Plated Steel Zinc Plated Steel
C18 Set Screw Zinc Plated Steel Zinc Plated Steel
C19 O-Ring Acrylonitrile-Butadiene Acrylonitrile-Butadiene

10
Water Hydraulic Cylinder
Materials of Construction
Item Description Standard Construction C-540 Construction
C1 Cylinder Head Cast Iron, ASTM A126 Ductile Iron, ASTM A536 65-45-12 Nickel Plated
C2 Bearing Bronze Oil Impregnated
C3 Rod Seal Teflon with NBR
C4 Piston Rod Stainless Steel, ASTM A564, Type 17-4 Stainless Steel, Type 304 Chrome Plated
C5 Vent Plug Alemite 47200
C6 O-Ring Acrylonitrile-Butadiene Acrylonitrile-Butadiene
C7 Cylinder Tube Fiberglass Fiberglass
C8 Piston Cast Iron, ASTM A126 Cast Iron, ASTM A126 Class B Nickel Plated
C9 O-Ring Acrylonitrile-Butadiene Acrylonitrile-Butadiene
C10 Piston Seal Virgin Teflon Virgin Teflon
C11 Nut Stainless Steel, Type 18-8 Stainless Steel, Type 18-8
C12 Cylinder Cap Ductile Iron, ASTM A536 Ductile Iron, ASTM A536 65-45-12 Nickel Plated
C13 Tie Rod Zinc Plated Steel Steel, AISI C1018 Zinc Plated
C14 Washer Zinc Plated Steel Zinc Plated Steel
C15 Nut Zinc Plated Steel Zinc Plated Steel
C16 Seal Thread Steel with Nitrile Steel with Nitrile
C17 Jam Nut Zinc Plated Steel Zinc Plated Steel
C18 Set Screw Stainless Steel, Type 18-8 Stainless Steel, Type 18-8
C19 O-Ring Acrylonitrile-Butadiene Acrylonitrile-Butadiene
C25 Gland Cast Iron, ASTM A126
C29 Scraper Carbon Steel
C30 Packing Neoprene & Cotton Duck

Water Hydraulic Standard

C9 C10

C17 C30 C25

C18 C29

C16

C11 Water Hydraulic C-540

C12
C9 C10
C19 C1 C4
C17
C13 C15 C14 C8 C7 C29 C6
C18

C16

C11

C12

C13

C15 C14 C8 C19 C7 C6 C5 C3 C1 C2 C4

11
 Valve Accessories Accessories
Mechanical Joint Accessories Manual Actuators
Accessories include bolts, nuts, packing and
glands for both ends. 450 Ft-Lb (612 Nm) Input Stops
Available on M-Series actuators with handwheel
Manual Actuators or nut. LA-Series actuators have 450 Ft-Lb (612
Nm) input stops as standard.
10-Position Levers
A 10-position dial provides positive latching in Chain For Chainwheel Actuators
open, closed and eight intermediate positions. Chain for chainwheel actuators are available
A pointer indicates position of disc plus a notch in zinc plated, galvanized or 304 stainless steel.
in the handle allows use of a padlock to prevent
unauthorized valve operation. Stainless Steel Bolting
Includes stainless steel fasteners on valve
Mounting and actuator.
Lever actuators can be mounted at standard or
180. Levers are available on 38" (80200mm) Clockwise Rotation
valve sizes. Clockwise rotation to open (open right). Available
Seat Side Seat Side with M-Series and LA Series Manual Actuators.

Galvanized Chainwheel and Guide
Standard Position 180 Position Same as chainwheel actuator except
chainwheel and guide are galvanized.
Mounting Nut & Handwheel
Dial Indicating Floorstand
Seat Side Seat Side Seat Side Seat Side
For valves with handwheel actuators.
Actuator is mounted on the valve
and the input shaft is extended to
Standard 90 Position 180 Position 270 Position the floorstand. Included with the
Position floorstand are the handwheel
mounted on the floorstand, dial
Chainwheel indicator and couplings. Extension rod
Seat Side Seat Side must be ordered separately. Floorstand
may be directly above valve or offset
from valve location. A buried
actuator must be specified
Standard Position 180 Position when ordering an FSDI.

Rotating Manual Actuators Extension Rod

DeZURIK offers a variety of rotary manual Extension rod is required for use
actuators which are in complete compliance with with FSDI floorstand.
AWWA C-504. Manual actuators are available
with handwheel, chainwheel or 2" (50mm2) Actuator Mounted on
square nut options. Floorstand
Included with floorstand are the
couplings, extension pipe and
mounting of actuator on floorstand.

12
Neck Extensions Floorbox
Included is an extended valve For use with nut style actuators. It
neck and shaft. Valves for use includes floorbox and cover. May be
with neck extensions must be used with valves having standard or
furnished with non-adjustable packing extended nut actuators. Top of nut
and a non-buried actuator. Extensions must be 2" (50mm) from top
are not recommended for use with of floorbox. Floorboxes are
positioners. tee wrench actuated.
Tee wrenches must be
Extended Nut for ordered separately. Box
Manual Actuators depth is available in 1"
(25mm) increments from
For actuators used with floorboxes 6" (150mm) through 18"
and valve boxes. Includes (450mm). Standard is 6" (150mm).
couplings, extension rod
and extended 2" (50mm) Tee Wrench
square nut.
For use in actuating 2" (50mm) nut actuators.
Available in 4, 5, 6, 7 or 8 foot lengths. Other
Valve Box and Valve
lengths available on special order.
Box Extensions
For use with buried actuators.
Includes valve box and cover. One Cylinder Actuators
to five extension pieces may be DeZURIK cylinder actuators are available as double-
ordered to extend depth of valve acting pneumatic or water hydraulic cylinders
box. Valve boxes may be used for either on-off or positioning services. Cylinder
with valves having standard or actuators per AWWA C-540 should be specified.
extended nut actuators. Top of
nut must be 6" (150mm) below Mounting
grade. Valve boxes are tee wrench Cylinder actuators can be mounted at 90 increments
actuated. Tee wrenches must be from standard.
ordered separately.
Manual and Throttling
Manual Override
Contact Application Engineer for assistance.

T- Series
Seat
Side
Seat
Side

Seat
Seat Side Side

Standard Position 90 Position 180 Position 270 Position

G- Series
Seat
Side
Seat
Seat Seat
Side
Side Side

Standard Position 90 Position 180 Position 270 Position

Electric Motors
When ordering electric motor actuators, please
provide information listed on Data Input Checklist
at end of bulletin.

13
 Accessories
Cylinder Actuators
Positioners Floorstand
DeZURIK offers both pneumatic and electronic For valves with cylinder actuators mounted on
signal valve positioners for use floorstand. Included with the floorstand are
with cylinder actuators. couplings, the extension pipe and mounting of
the actuator on the floorstand.
Gauges
Pneumatic positioners are available with
three gauges mounted and piped; electronic
positioners are available with two gauges
mounted and piped.

4-Way Solenoid Valves

For cylinder actuators, 4-way direct acting,
two position solenoid valves feature metal
enclosures, .25" (6mm) NPT connections, Cv
of .70 and a maximum pressure differential of
125 psi (8.5 Bar). Solenoid coil voltage is both
110/50/1 and 120/60/1 AC power. Contact
Sartell Valves, Inc. for DC voltage. Solenoids
are available with or without manual overrides.
On large valves, furnish valve/actuator size,
service conditions, and required operating
speed for recommendations. Solenoid action
should be specified.
Neck Extension
Air Filter Regulator
For 320" (80500mm) valves using T-Series
For use on all pneumatic actuators. Includes a
Cylinder actuators. Included is the extended
pressure reducing valve with filter and gauge.
valve neck and shaft with actuator mounted.
Maximum supply is 100 psi (7 Bar).

Speed Control Valves

Speed control valves are available for controlling
opening and closing speed on cylinder actuators.

Position Indicating Switches

Available in NEMA 4, 4x, 7 or 9 ratings. Switches
are available as two SPDT or four SPDT.

14
 Dimensions
E

Seat
Side

B
A
Basic Valve - Flanged
A B C D E
Valve
Size 25A, 75B 25A, 75B 25A, 75B 25A, 75B
250B 250B 250B 250B 250B Only
& 150B* & 150B* & 150B* & 150B*
3" 5.00 5.00 .81 1.19 4.00 4.12** 4.81 4.81
80mm 127 127 21 30 102 105 122 122
4" 5.00 5.00 1.00 1.31 4.75 5.00** 5.56 5.56
100mm 127 127 25 33 121 127 141 141
6" 5.00 5.00 1.06 1.50 6.03 6.25** 7.00 7.00
150mm 127 127 27 38 153 159 178 178
8" 6.00 6.00 1.19 1.69 7.16 7.50** 8.31 8.31
200mm 152 152 30 43 182 191 211 211
10" 8.00 8.00 1.25 1.97 8.38 8.75** 9.50 9.50
250mm 203 203 32 50 213 222 241 241
12" 8.00 8.00 1.31 2.09 9.66 10.25** 11.00 11.00
300mm 203 203 33 53 245 260 279 279
14" 8.00 8.00 1.47 2.25 10.91 11.50** 11.50 11.50
350mm 203 203 37 57 277 292 292 292
16" 8.00 8.00 1.53 2.38 12.06 12.75** 12.75 12.75
400mm 203 203 39 60 306 324 324 324
18" 8.00 8.00 1.66 2.50 14.03 14.50 13.50 14.00
450mm 203 203 42 64 356 368 343 356
20" 8.00 8.00 1.78 2.63 15.02 17.50 15.25 15.25
500mm 203 203 45 67 382 445 387 387
24" 8.00 12.00 1.97 2.91 19.00 20.19 18.41 19.50
600mm 203 305 50 74 483 513 468 495
30" 12.00 12.00 2.25 3.13 23.00 23.75 22.62 21.75 1.25
750mm 305 305 57 80 584 603 575 552 32
36" 12.00 15.00 2.50 3.50 27.38 27.38 25.62 25.62 1.25
900mm 305 381 64 89 696 695 651 651 32
42" 12.00 15.00 2.75 3.81 30.91 30.91 30.42 30.42 1.25
1100mm 305 381 70 97 785 785 773 773 32
48" 15.00 15.00 2.88 4.13 35.38 35.38 33.00 33.00 1.25
1200mm 381 381 73 105 899 899 838 838 32

Inches
Millimeter
Contact DeZURIK for dimensions on valve sizes 54" (1400mm) and larger.
*Available in AWWA Class 250B when ordered with 17-4 Shaft and 250 psi bearings.
**Flange length exceeds thrust bearing cover in these valve sizes.
Note: All dimensions are subject to change without notice. Request certified drawings for use in preparing piping layouts.

15
 Dimensions
Basic Valve Mechanical Joint
Valve
A B C D E
Size
4" 8.56 4.75 4.75 5.56 2.50
100mm 217 121 121 141 64
6" 8.88 4.75 6.03 7.00 2.50
150mm 226 121 153 178 64
8" 9.50 5.00 7.16 8.31 2.50
200mm 241 127 182 211 64
10" 9.88 5.25 8.38 9.50 2.50
250mm 251 133 213 241 64
12" 10.00 5.38 9.66 11.00 2.50
300mm 254 137 245 279 64
14" 12.38 6.62 10.91 11.50 3.50
350mm 315 168 277 292 89
16" 12.75 6.75 12.06 12.75 3.50
400mm 324 171 306 324 89
18" 13.42 7.00 14.03 13.50 3.50
450mm 341 178 356 343 89
20" 13.38 7.12 15.02 15.25 3.50
500mm 340 181 382 387 89
24" 13.75 7.50 19.00 18.41 3.50
600mm 349 191 483 468 89
30" 17.75 9.62 23.00 22.62 4.00
750mm 451 244 584 575 102
36" 18.00 10.00 27.38 25.62 4.00
900mm 458 254 696 651 102
42" 18.75 10.25 30.91 30.41 4.00
1100mm 476 260 785 772 102
48" 19.62 10.62 35.38 33.00 4.00
1200mm 498 270 898 838 102

Inches
Millimeter
Note: All dimensions are subject to change without notice.
Request certified drawings for use in preparing piping layouts.

Seat
Side

16
 Seat
Side
Lever Actuator
Valve M N P R P
Size
3-4" 2.56 3.56 3.00 14.00
80-100mm 65 90 76 356
N
6-8" 2.88 3.56 3.00 14.00
150-200mm 73 90 76 356 R

Handwheel Actuator
M-Series 324" (80600mm)

Valve Size
(Handwheel F G H I J K L
Size) Seat
3-10" 7.44 4.75 1.62 3.62 8.00 2.25 5.00 Side
80-250mm 189 121 41 92 203 57 127
1214" 11.69 4.75 1.62 3.62 16.00 2.25 5.00
300350mm 297 121 41 92 406 57 127
16-18" 9.81 7.25 3.50 7.19 8.00 2.19 5.19
H
I
400-450mm 249 184 89 183 203 56 132
20" 14.06 7.25 3.50 7.19 16.00 2.19 5.19
500mm 357 184 89 183 406 56 132
24" F G
10.06 7.25 3.50 7.19 12.00 2.19 5.19
600mm
256 184 89 183 305 56 132
(HD12)
24"
13.06 7.25 3.50 7.19 16.00 2.19 5.19
600mm
332 184 89 183 406 56 132 K
(HD16)
J L
24" 15.69 7.25 3.50 7.19 24.00 2.19 5.19
600mm
399 184 89 183 610 56 132
(HD24)

Handwheel Actuator
M-Series 30" (750mm) Seat
Side
Valve Size
(Handwheel F G H I J K L M M
Size)
H
30" I
15.69 8.25 3.50 7.19 24.00 3.19 6.19 8.25
750mm
399 210 89 183 610 81 157 210
(HD24)

30"
G
21.00 8.25 3.50 7.19 36.00 3.19 6.19 8.25 F
750mm
533 210 89 183 914 81 157 210
(HD36)

Inches
Millimeter
J L
K

17
 Dimensions (continued) Seat Side

Chainwheel Actuator
M-Series 320" (80500mm) H
I
Valve
F G H I J K L
Size
310" 10.38 4.75 1.62 3.62 9.19 2.25 5.00
80250mm 264 121 41 92 233 57 127 F
12" 12.78 4.75 1.62 3.62 9.19 2.25 5.00 G
300mm 325 121 41 92 233 57 127
1416" 14.78 4.75 1.62 3.62 20.06 2.25 5.00
350400mm 375 121 41 92 510 57 127
18" 15.19 7.25 3.50 7.19 9.19 2.19 5.19
450mm 386 184 89 183 233 56 132
J L
20" 16.00 7.25 3.50 7.19 20.06 2.19 5.19 K
500mm 406 184 89 183 510 56 132

Chainwheel Actuator
M-Series 2430" (600750mm) Seat Side

Valve Size H
(Chainwheel F G H I J K L
Size) J I
24"
25.62 7.25 3.50 7.19 20.06 2.19 5.19
600mm
651 184 89 183 510 56 132
(MS-7-CW20)

F
30" G
25.62 8.25 3.50 7.19 20.06 3.19 6.19
750mm
651 210 89 183 510 81 157 For Actuator 6.50
(MS-7-CW20)
Removal 165

L
K

Nut (M-Series)
Valve
F G H I J K L
Size
314" 7.38 4.75 1.62 3.62 2.00 2.25 5.00
80350mm 188 121 41 92 51 57 127
1624" 9.75 7.25 3.50 7.19 2.00 2.19 5.19 Seat Side
400600mm 248 184 89 183 51 56 132
30" 10.25 7.56 4.00 8.12 2.00 3.06 5.94
750mm 260 192 102 206 51 78 151

Inches H
Millimeter I
Note: All dimensions are subject to change without notice.
Request certified drawings for use in preparing piping layouts.
F G

J
K
L

18
Cylinder Actuator (T-Series)

Valve Size F
(Cylinder G H I J K L
Size) Pneumatic Hydraulic
312" 18.12 21.12 16.31 3.25 5.94 5.38 1.81 4.69 Seat
80300mm 460 536 414 83 151 137 46 119 Side
(C4) H
12" 18.88 21.88 16.31 3.25 5.94 7.88 1.81 4.69
300mm 480 556 414 83 151 200 46 119 I
(C6)
1416"
350400mm
23.44 26.44 17.88 4.44 8.12 7.88 3.12 5.84 F G
595 672 454 113 206 200 79 148
(C6)

1820"
23.44 26.44 17.88 4.44 8.12 7.88 3.12 6.03
450500mm
595 672 454 113 206 200 79 153
(C6)
J L
1820"
K
24.06 27.06 17.88 4.44 8.12 10.25 3.12 6.03
450500mm
611 687 454 113 206 260 79 153 Seat
(C8)
Side

Cylinder Actuator (G-Series)

Valve Size F
(Cylinder G H I J K H
Size) Pneumatic Hydraulic
24"
600mm
31.50 32.75 17.50 6.88 4.25 8.50 3.25 Seat
(GS-12-PC8)
800 832 445 175 108 216 83 Side

24"
31.62 33.88 17.50 6.88 5.25 10.50 3.25
600mm
803 861 445 175 133 267 83 G F
(GS-12-PC10)
I
24" 43.88 41.78 24.25 9.00 5.88 11.75 3.50 K J
600mm 1115 1061 616 229 149 298 89
(GS-16-PC10)

30" 31.50 32.75 17.50 6.88 4.25 8.50 3.50
750mm Seat
800 832 445 175 108 216 89 Side
(GS-12-PC8)

3036" 31.62 33.88 17.50 6.88 5.25 10.50 3.50
750900mm 803 861 445 175 133 267 89
(GS-12-PC10)
3042"
43.25 41.78 24.25 9.00 5.88 11.75 3.75
7501100mm
1099 1061 616 229 149 298 95
(GS-16-PC10)
3642"
44.62 43.50 24.25 9.00 7.00 14.00 3.75
9001100mm
1133 1105 616 229 178 356 95
(GS-16-PC12)
J

Nut (LA-Series) F
F with Seat
Valve Size Side
(Actuator F Spur G H I J K L G
Size) Gear
3042" 14.19 20.81 9.38 8.25 9.44 2.00 4.41 6.25
7501100mm 360 529 238 210 240 51 112 159 L
(LA-4)
3654"
16.19 22.81 12.12 8.25 11.12 2.00 4.41 6.25 K
9001400mm
411 579 308 210 282 51 112 159
I
(LA-6) H
4254"
11001400mm 20.19 26.81 16.81 8.25 16.12 2.00 4.81 5.84
(LA-10) 513 681 427 210 409 51 122 148

Inches
Millimeter

19
 Dimensions (continued)
Handwheel LA-Series 3048" (7501200mm)

F with
Actuator
F Spur G H I J K L
Size
Gear Seat
11.62 18.25 9.38 8.25 9.44 12.00 4.41 6.25 Side
LA-4-HD12
295 464 238 210 240 305 112 159
12.25 18.88 9.38 8.25 9.44 16.00 4.41 6.25 H
LA-4-HD16
311 480 238 210 240 406 112 159
20.25 26.88 9.38 8.25 9.44 24.00 4.41 6.25

LA-4-HD24
514 683 238 210 240 610 112 159
I
22.88 29.50 9.38 8.25 9.44 30.00 4.41 6.25
LA-4-HD30
581 749 238 210 240 762 112 159
F G
25.50 32.12 9.38 8.25 9.44 36.00 4.41 6.25
LA-4-HD36
648 816 238 210 240 914 112 159

Handwheel LA-Series 3654" (9001400mm)

F with
Actuator L
F Spur G H I J K L
Size J
Gear K
13.62 20.25 12.12 8.25 11.12 12.00 4.41 6.25
LA-6-HD12
346 514 308 210 282 305 112 159
14.25 20.88 12.12 8.25 11.12 16.00 4.41 6.25
LA-6-HD16
362 530 308 210 282 406 112 159
22.25 28.88 12.12 8.25 11.12 24.00 4.41 6.25
LA-6-HD24
565 734 308 210 282 610 112 159
24.88 31.50 12.12 8.25 11.12 30.00 4.41 6.25
LA-6-HD30
632 800 308 210 282 762 112 159
27.50 34.12 12.12 8.25 11.12 36.00 4.41 6.25
LA-6-HD36
699 867 308 210 282 914 112 159

Handwheel LA-Series 4254" (11001400mm)

F with
Actuator
F Spur G H I J K L
Size
Gear
17.62 24.25 16.81 8.25 16.12 12.00 4.81 5.84
LA-10-HD12
448 616 427 210 409 305 122 148
18.25 24.88 16.81 8.25 16.12 16.00 4.81 5.84
LA-10-HD16
464 632 427 210 409 406 122 148
26.25 32.88 16.81 8.25 16.12 24.00 4.81 5.84
LA-10-HD24
667 835 427 210 409 610 122 148
28.88 35.50 16.81 8.25 16.12 30.00 4.81 5.84
LA-10-HD30
734 902 427 210 409 762 122 148
31.50 38.12 16.81 8.25 16.12 36.00 4.81 5.84
LA-10-HD36
800 968 427 210 409 914 122 148

Inches
Millimeter
Note: All dimensions are subject to change without notice.
Request certified drawings for use in preparing piping layouts.

20
Chainwheel LA-Series 3048" (7501200mm)

F with Seat
Actuator
F Spur G H I J K L Side
Size
Gear
35.00 41.62 9.38 8.25 9.44 12.75 4.41 6.25 M
LA-4-CW12
889 1057 238 210 240 324 112 159
H
35.00 41.62 9.38 8.25 9.44 20.06 4.41 6.25 I
LA-4-CW20
889 1057 238 210 240 510 112 159
35.00 41.62 9.38 8.25 9.44 29.75 4.41 6.25
LA-4-CW30
889 1057 238 210 240 756 112 159
F G

Chainwheel LA-Series 3654" (9001400mm)

F with
Actuator
F Spur G H I J K L
Size J K L
Gear
37.00 43.62 12.12 8.25 11.12 12.75 4.41 6.25
LA-6-CW12
940 1108 308 210 282 324 112 159
37.00 43.62 12.12 8.25 11.12 20.06 4.41 6.25
LA-6-CW20
940 1108 308 210 282 510 112 159
37.00 43.62 12.12 8.25 11.12 29.75 4.41 6.25
LA-6-CW30
940 1108 308 210 282 756 112 159

Chainwheel LA-Series 4254" (11001400mm)

F with
Actuator
F Spur G H I J K L
Size
Gear
41.00 47.62 16.81 8.25 16.12 12.75 4.81 5.84
LA-10-CW12
1041 1210 427 210 409 324 122 148
41.00 47.62 16.81 8.25 16.12 20.06 4.81 5.84
LA-10-CW20
1041 1210 427 210 409 510 122 148
41.00 47.62 16.81 8.25 16.12 29.75 4.81 5.84
LA-10-CW30
1041 1210 427 210 409 756 122 148

Inches
Millimeter
Note: All dimensions are subject to change without notice.
Request certified drawings for use in preparing piping layouts.

21
 DeZURIK Butterfly Basin/Tank Down to Free Discharge

Valve Applications
Data Input Checklist
Pump*

Fitting Basin/Tank

Other How Close? Other

(Number of Pipe Diameters)
Part A: Check boxes and complete lines to show
upstream/downstream configuration,
enter distances in pipe diameters.
*Attach pump curve to checklist if available.

Part B: Check off or enter operating conditions.

1. Valve Function? o Open/Shut o Throttling o Modulating Control
2. Where Installed? o Buried o Submerged o Above Ground, In Plant
3. Line Fluid? o Fresh Water o Sewage o Air o Other?___________________________________________________
4. Maximum Fluid Temperature? _______________C _______________F
5. Line Size? _______________inches _______________(mm) (nominal)
6. Normal Working Pressure? _______________psi _______________kPa
Maximum (Shutoff) Pressure Differential? _______________psi _______________kPa
7. Normal Wide Open Valve Flow? _______________flow rate or _______________flow units
8. Emergency Maximum (Line Break, Etc.) Flow? _______________flow rate _______________flow units
9. (If Throttling or Modulating Control) Flow Range Desired?
Maximum Flow? _______________flow rate _______________flow units
Minimum Flow? _______________flow rate _______________flow units
10. Pipe Connection? _______________Flanged _______________Mechanical Joint _______________Other

Part C: Check off or enter operator requirements.

1. Operator Type? Manual: o Lever o Lead Screw o Gear o Other?
Power: o Cylinder o Electric o Other?
2. Direction of Rotation To Open: o Clockwise(OR) o Counter clockwise(OL)
3. Cylinder Specifications:
a. Supply Type and Pressure? o Water____________psi_________kPa o Oil________________psi_________kPa
o Air _________________psi_________kPa o Other___________psi_________kPa
b. Fail Safe? o Yes o No; If yes which way if valve fails? o Open o Close
c. Operating Times? _________sec Open to Close; _________sec Close to Open
d. Accessories?
o Speed Control o Limit Switches (ES) (Qty:_______O,_______C,_______I)
o Solenoid W/Manual Override o Positioner
o Manual Override (On loss of supply press.) o Solenoid W/O Manual Override
o Other? ________________________________________________________________________________________________________________________________________________
4. Electric Specifications:
a. Supply?_________Volts_________Phase_________Hz
b. Duty Cycle? o Intermittent o Continuous
c. Starter/Control Needs?_____________________________________________________________________________________________
d. Operating Times?_________sec (Note: 60 sec per AWWA unless specified)
e. Accessories?
o AUX Switches o Potentiometer o Slidewire Receiver o Reversing Starter
o Heaters o Control Station o Control Transformer o Other?__________________________

22
 Sales and Service
For information about our worldwide locations, approvals, certifications and local representative:
Web Site: www.dezurik.com E-Mail: info@dezurik.com

250 Riverside Ave. N. Sartell, Minnesota 56377 Phone: 320-259-2000 Fax: 320-259-2227
DeZURIK, Inc. reserves the right to incorporate our latest design and material changes without notice or obligation.
Design features, materials of construction and dimensional data, as described in this bulletin, are provided for your information only
and should not be relied upon unless confirmed in writing by DeZURIK, Inc. Certified drawings are available upon request.

Printed in the U.S.A.