Phontech Bts 4000

Handbook page
1/52
DOCUMENTATION HANDBOOK
PHONTECH
BTS 4000
BATTERYLESS TELEPHONE SYSTEM
www.jotron.com
Downloaded from www.Manualslib.com manuals search engine

BTS 4000 Handbook contents:
Handbook page:
Batteryless Telephone System 4000
System Description ... 08400-006-DE . 1
External Connection , 1L. Configuration example, 4050/4051 .. 08400-006-EC-01 .... 20
External Connection , 12L. Configuration example, 4060/4061 ..... 08400-006-EC-02 .... 21
External Connection , 24L. Configuration example, 4040/4000 .. 08400-006-EC-03 .... 22
4040, Batteryless Telephone, 24L

Mechanical Layout (flush mounted) ... 08400-001-ML . 23
Mechanical Layout (bulkhead mounted) .... 08400-001-ML-02 24
External Connection ..... 08400-001-EC .. 25

4051, Batteryless Telephone w/Amp, 1L


4061, Batteryless Telephone w/Amp, 12L

99400-011, Relay Switch Board for BTS

Board Layout .................................... 99400-011-LO ... 38
Description ................................................... 99400-011-CA ...... 39
Circuit Diagram ............ 99400-011-CD .. 40
Amplifier unit, 4000

Mechanical Layout ... 87400-004-ML . 41
4018, Headset Plugbox with Call Stop

9000, Relay Unit

Headset with PTT Switch, 0018

Headset with Chest Switch, 9010

Mechanical Layout ... 00900-002--ML . 48
Ver 2010.09

Handbook page
1/50
Doc.No.: 08400-006-DE
BATTERYLESS TELEPHONE SYSTEM 4000

UNITS: 4000 / 4040 / 4050 / 4051 / 4060 / 4061
SYSTEM DESCRIPTION.
Contents:
1. GENERAL DESCRIPTION ............................................................................................................. 3
2. LIST OF TELEPHONE UNITS ....................................................................................................... 4
2.1. 24 LINES BATTERYLESS TELEPHONE, TYPE 4040 ......................................................... 4
2.2. 12 LINES BATTERYLESS TELEPHONE WITH INTEGRATED AMP, TYPE 4061 .......... 5
3. ADDITIONAL EQUIPMENT .......................................................................................................... 6
3.1. AMPLIFIER UNIT, TYPE 4000 ............................................................................................... 6
3.2. RELAY UNIT, TYPE 9000 ...................................................................................................... 7
3.3. PLUGBOX FOR HEADSET WITH CALL STOP, TYPE 4018 .............................................. 7
3.4. HEADSET WITH PTT SWITCH AND PLUG, TYPE 0018 ................................................... 8
3.5. HEADSET WITH PTT SWITCH, TYPE 9010 ........................................................................ 8
3.6. PLUG-IN RELAY MODULE (BRD 99400-011) .................................................................... 9
4. LIST OF FACILITIES ...................................................................................................................... 9
4.1. BATTERYLESS AMPLIFIERT UNIT, TYPE 4000 ............................................................... 9
4.2. 24 LINES BATTERYLESS TELEPHONE 4040 ................................................................... 10
4.3. SINGLE LINE BATTERYLESS TELEPHONE, TYPE 4050 ............................................... 10
4.4. SINGLE LINE BATTERYLESS TELEPHONE WITH AMPLIFIER, TYPE 4051.............. 10
4.5. 12 LINES BATTERYLESS TELEPHONE, TYPE 4060 ....................................................... 10
5. BASIC MEANS OF OPERATION ................................................................................................ 11
5.1. GENERAL ............................................................................................................................... 11
5.2. MAKE A CALL TO ANOTHER STATION .......................................................................... 11
5.3. ANSWER A CALL FROM ANOTHER STATION............................................................... 11
5.4. TERMINATE A CONVERSATION ...................................................................................... 11
5.5. HEADSET (TYPE 9010) OPERATION ................................................................................. 12
1 08.07.2010 REVISION, EM 1289 ASK ASK This document is the property of JOTRON
PHONTECH and must not be copied or shown to a
0 27.10.2008 FINAL DOCUMENTATION CD third person without our written consent. In the
REV No: ISSUE DATE REASON FOR ISSUE PREPARED CHECKED APPROVED interest of product improvement, JOTRON
PHONTECH reserves the right to alter
TITLE: BATTERYLESS TELEPHONE SYSTEM 4000 specification and design without notice.
SIZE: -- UED no: --

DESCRIPTION DOC no: 08400-006-DE
FILE NAME: 08400-006-DE.doc
Page 1 of 19

Handbook page
2/50
Doc.No.: 0400-000-DE
5.5.1. Make a call out from the telephone to another station ......................................................... 12
5.5.2. Answer a call from another station ...................................................................................... 12
6. INSTALLATION............................................................................................................................ 13
6.1. SYSTEM CONFIGURATION ................................................................................................ 13
6.2. MOUNTING............................................................................................................................ 13
6.3. COMPASS SAFE DISTANCE ............................................................................................... 13
6.4. CABLE TERMINATION ....................................................................................................... 13
6.5. CABLE REQUIREMENTS .................................................................................................... 14
6.6. GLANDING ............................................................................................................................ 14
6.7. SCREENING ........................................................................................................................... 14
6.8. MARKING .............................................................................................................................. 14
6.9. FASTENING ........................................................................................................................... 14
6.10. PRESERVATION ................................................................................................................ 14
6.11. VOLUME ADJUSTMENT ................................................................................................. 15
7. TECHNICAL DATA. TELEPHONE UNITS 4040/4050/4051/4060/4061................................... 16
8. SINGLE LINE DIAGRAM SINGLE LINE SYSTEM ............................................................... 17
9. SINGLE LINE DIAGRAM 12 LINE SYSTEM ......................................................................... 18
10. SINGLE LINE DIAGRAM 24 LINE SYSTEM ...................................................................... 19
Page 2 of 19

Handbook page
3/50
Doc.No.: 08400-006-DE
1. GENERAL DESCRIPTION
The batteryless telephone system is developed and manufactured Jotron Phontech as.
The different modules in the system are designed to meet the need and demand for non-
powered internal (sound powered) emergency communication on ships.
The system is basically divided into three different configurations, the single line system
(4050/4051) for point-to point communication between two stations, like the bridge and the
machinery spaces. The 12 lines system, (4060/4061) for up to 12 stations. And the 24 lines
system (4000/4040) for up to 24 stations.
The compact design provides good installation possibilities, with a minimum space
requirement.
The flush mounting units are adapted to the DIN 144x144 module standard for easy mounting
in the bridge and engine control consoles.
The modules may also be wall mounted; this requires a wall mounting back-box. (Optional)
The different units are prepared for gland mounting, i.e. holes have been fitted for a wide range
of cable glands.
Several additional types of equipment may be connected to the Batteryless Telephone System,
like headset connector boxes, extra headsets, power supplies, external signal devices relay
switch boxes, etc.
Page 3 of 19

Handbook page
4/50
Doc.No.: 08400-006-DE
2. LIST OF TELEPHONE UNITS
Type BTS 4040. 24 lines batteryless telephone.

Type BTS 4050 Single line batteryless telephone.
Type BTS 4051 Single line batteryless telephone with integrated amplifier
Type BTS 4060 12 lines batteryless telephone.
Type BTS 4061 12 lines batteryless telephone with integrated amplifier
2.1. 24 LINES BATTERYLESS TELEPHONE, TYPE 4040
PHONTECH 4040
Page 4 of 19
.

Handbook page
5/50
Doc.No.: 08400-006-DE
2.2. 12 LINES BATTERYLESS TELEPHONE WITH INTEGRATED AMP, TYPE

4061
PHONTECH 4061
Page 5 of 19
.

Handbook page
6/50
Doc.No.: 08400-006-DE
3. ADDITIONAL EQUIPMENT
Type BTS 4000. Amplifier unit (separate) for a 4040 / 24 lines system
Type 9000 Relay unit (for additional signal device)
Type 4018 Plugbox for headset with Call stop.
Type 0018 Headset with PTT switch and plug. (Connects to 4018)
Type 9010 Headset with PTT switch. (Connects directly to the telephone unit)
BRD 99400-011 Plug-in relay module for external signal device.
Type 4052 Junction box type I (12 ext.)
Type 4053 Junction box type II (8 ext.)
3.1. AMPLIFIER UNIT, TYPE 4000
Page 6 of 19
.

Handbook page
7/50
Doc.No.: 08400-006-DE
3.2. RELAY UNIT, TYPE 9000
3.3. PLUGBOX FOR HEADSET WITH CALL STOP, TYPE 4018
Page 7 of 19
.

Handbook page
8/50
Doc.No.: 08400-006-DE
3.4. HEADSET WITH PTT SWITCH AND PLUG, TYPE 0018
3.5. HEADSET WITH PTT SWITCH, TYPE 9010
9 meter CABLE
Page 8 of 19
.

Handbook page
9/50
Doc.No.: 08400-006-DE
3.6. PLUG-IN RELAY MODULE (BRD 99400-011)
A relay module for activation of external signal device can be installed in the betteryless
telephones: 4040 / 4050 / 4051 / 4060 / 4061
The relay module is to be mounted by the installer. The unit is delivered separately, and is to be
plugged into the appropriate telephone unit.
Open the backbox on the telephone unit.

Plug the relay unit into the receptacle on the PCB inside the telephone. Make sure the
connector pins make contact.
Snap the stand off`s (2pcs) into the holes in the PCB.
Make the connections according to the installation drawings 99400-017-EC or 99400-018-
EC.
If DC voltage is used, make sure the polarity is correct. (Indication on the dwgs. 99400-
017-EC and 99400-018-EC)
4. LIST OF FACILITIES
4.1. BATTERYLESS AMPLIFIERT UNIT, TYPE 4000
- Interface for up to 24 batteryless telephones

- Extreme low current drain speech amplifier.
Page 9 of 19
.

Handbook page
10/50
Doc.No.: 08400-006-DE
4.2. 24 LINES BATTERYLESS TELEPHONE 4040
- Handset with PTT button.

- Noise cancelling microphone.
- Piezo- electric buzzer for call indication.
- Call led.
- 20 seconds call delay timer. (24 VDC required)
- Call stop button.
- Call line rotary selector switch.
- Back lightning of the line selector and the call stop button. (24 VDC required)
4.3. SINGLE LINE BATTERYLESS TELEPHONE, TYPE 4050

- Call led.
- Call stop button.
- Back lightning of the call stop button. (24 VDC required)
4.4. SINGLE LINE BATTERYLESS TELEPHONE WITH AMPLIFIER, TYPE 4051

- Call led.
- Call stop button.
- Back lightning of the call stop button. (24 VDC required)
4.5. 12 LINES BATTERYLESS TELEPHONE, TYPE 4060

- Call led.
- Call stop button.
Page 10 of 19
.

Handbook page
11/50
Doc.No.: 08400-006-DE
4.6. 12 LINES BATTERYLESS TELEPHONE WITH AMPLIFIER, TYPE 4061

- Piezo - electric buzzer for call indication.
- Call led.
- Call stop button.
5. BASIC MEANS OF OPERATION
5.1. GENERAL
The batteryless telephone system is operated by means of the handset with PTT switch,
the call line selector switch, (not 4050/4051) and the call generator crank.
There is no priority between units in the system and several users can use the system
simultaneously. All users will then join the same conversation/conference call.
The units are equipped with screw terminals for connection of a headset, type 9010.
5.2. MAKE A CALL TO ANOTHER STATION
- Lift the handset. (See illustration next page)

- Select the line by means of the line selector (not applicable to 4050/4051)
- Crank the generator 3-5 turns.
5.3. ANSWER A CALL FROM ANOTHER STATION
- The telephone will sound the call tone and light the call indicator led (red)
- Lift the handset (See illustration next page) and press the PTT button.
Keep the PTT button pressed at all times during conversation.
- Optional headset: Set the PTT switch to ON and answer the call.
- If external power is connected to the system, the call delay timer will keep the call
indicator led lit (green) for about 30 seconds. Press the CALL STOP button (on the
telephone or the headset plugbox, type 4018) to turn it off manually before automatic
time out.
- Additional external signal devices will be activated together with the call indicator led.
5.4. TERMINATE A CONVERSATION
- Replace the handset in the holder. (See illustration next page)
Page 11 of 19
.

Handbook page
12/50
Doc.No.: 08400-006-DE
5.5. HEADSET (TYPE 9010) OPERATION
5.5.1. Make a call out from the telephone to another station

- Put the headset on, with the microphone close to your mouth.
- Select the line by means of the line selector (not applicable to 4050/4051),
- Crank the generator (on the telephone) 3-5 turns.
- When the call is answered, press the PTT -switch temporary on to talk or push it
in/upwards for locked operation (handsfree).
- After the conversation, release the PTT-switch. From locked position press the button
downwards.
5.5.2. Answer a call from another station

- Put the headset on, with the microphone close to your mouth.
- Press the PTT -switch temporary on to talk or push it in/upwards for locked operation
(handsfree).
- After the conversation, release the PTT-switch. From locked position press the button
downwards.
- Replace the headset to its stowage position
ON/OFF HOOK HANDSET MOTION:
Page 12 of 19
.

Handbook page
13/50
Doc.No.: 08400-006-DE
6. INSTALLATION
6.1. SYSTEM CONFIGURATION

The system is to be configured by the installer. Each telephone must be connected to
different call number with regards to the Line selector (rotary switch). This is done by
means of a link connection in each telephone.
In a system consisting of 4040 telephones (up to 24 lines) this link is between terminal 29
and the required extension/call number terminal (1-24). Ref drawing 92400-008-EC.
In a 4050/4051 telephone point-to-point configuration the call link is made by means of
connecting terminal 1 of one telephone to terminal 13 (Call input) of the other and vice
versa. Ref drawing 99400-017-EC.
In a 4060/4061 telephone configuration (up to 12 lines) the link is to be connected between
terminal 13 and the desired call number. (1-12). Ref drawing 99400-018-EC.
6.2. MOUNTING
The telephone units (all types) are delivered for flush mounting. Optional wall mounting boxes
are delivered upon request.
Jotron Phontech as highly recommends the use of junction boxes for the external cable
distribution.
Prepared junction boxes, type 4052 and 4053 are available.
The sub-units (4000/4018/9000) are delivered with wall mounting box as standard.
6.3. COMPASS SAFE DISTANCE
Compass type Safe distance

BTS 4000 / 4040 / 4050 /
4051 / 4060 / 4061
Standard 1,7m
Steering 0,95m
Stand by steering Emergency
6.4. CABLE TERMINATION
All terminations must be done according to the External Cabling diagrams (example). Ref
chapter 6.1 above.
Page 13 of 19
.

Handbook page
14/50
Doc.No.: 08400-006-DE
6.5. CABLE REQUIREMENTS
All cables used with the Batteryless Telephone System to be of approved ship cable type.
ESPECIALLY IMPORTANT:
! Common outer screen

! Individually twisted pairs
! Recommended minimum conductor area is 0.50 mm
! All cabling in the batteryless telephone system to be a separate network
! DO NOT COMBINE WITH OTHER CABLES. THIS IS TO PREVENT
DISTURBANCE AND NOISE CAUSED BY INTERFERENCE.
6.6. GLANDING
The cables enter the units by means of cable glands. Where cable glands are not supplied from
the factory, the installer must adapt the glands to the actual cable outer diameter. This is to
obtain the specified ingress protection and cable relief.
6.7. SCREENING
The cable screen must be terminated to the ships GND in the main unit (4051/4061). The
cable screen must be connected through the junction box(s) and terminated in terminal 21
(terminal 35 in 4040) or earth stud in all telephones. Ref chapter 6.1 above.
6.8. MARKING
Each cable to be marked with cable number.

Each conductor to be marked with the specific termination number.
Please note that BTS telephones uses plug-able screw terminals as standard. This is to make the
installation and service work as smooth as possible.
6.9. FASTENING
Where applicable, the cables and the conductors shall be strapped to the structure.
6.10. PRESERVATION
Prior to, during, and after completion of the installation the equipment surfaces to be protected
against acid holding fluids, pollution, moist, impacts etc.
Page 14 of 19
.

Handbook page
15/50
Doc.No.: 08400-006-DE
This in order to avoid damaged equipment for which Jotron Phontech will void warranty
claims.
6.11. VOLUME ADJUSTMENT
Please note that volume adjustment is preset to a normal environment. It is not possible to make
individual volume adjustments on the telephones, but there is a common volume adjustment for
the whole system.
This is located in the system amplifier either as trimming potentiometer R12 in the 4000 unit or
RV1 in the 4051/4061 units.
R12 POSITION IN THE 4000 UNIT (BRD 87400-001):
Page 15 of 19
.

Handbook page
16/50
Doc.No.: 08400-006-DE
RV1 POSITION IN THE 4051/4061 UNITS (BRD 99400-001):
7. TECHNICAL DATA. TELEPHONE UNITS 4040/4050/4051/4060/4061
Dimensions flush mounting:

240 x 144 x 70 mm. (h x w x d)
Cut- out measurement flush mounting:
212 x 116 mm. (h x w)
Dimensions wall mounting wall mounting box included:
242 x 146 x 73 mm. (h x w x d)
Type 4050/51/60/61: add 78 mm to depth for handset.
Weight flush mounted: 1.4 kg.

Weight wall mounted: 1.8 kg.
Operation voltage 24 VDC (optional)

Ingress protection: IP 44.
Technical data for substations etc. see data sheets for each unit.
Page 16 of 19
.

Handbook page
17/50
Doc.No.: 08400-006-DE
8. SINGLE LINE DIAGRAM SINGLE LINE SYSTEM
Page 17 of 19
.

Handbook page
18/50
Doc.No.: 08400-006-DE
9. SINGLE LINE DIAGRAM 12 LINE SYSTEM
4018
H EADSET CALL
STOP
Page 18 of 19
.

Handbook page
19/50
Doc.No.: 08400-006-DE
10. SINGLE LINE DIAGRAM 24 LINE SYSTEM
PHONTECH 4040 PHONTECH 4040 PHONT ECH 4040
PHONT ECH 4040
PHONT ECH 4040
PHONT ECH 4040
4018
H EA D SET CALL
STOP
PHONT ECH 4040
Page 19 of 19
.

Handbook page
20/50

Handbook page
21/50

Handbook page
22/50

Handbook page
23/50

Handbook page
24/50

Handbook page
25/50

Handbook page
26/50

Handbook page
27/50

Handbook page
28/50

Handbook page
29/50

Handbook page
30/50

Handbook page
31/50

Handbook page
32/50

Handbook page
33/50

Handbook page
34/50

Handbook page
35/50

Handbook page
36/50

Handbook page
37/50

Handbook page
38/50

Handbook page
39/50
Doc.No.: 99400-011-CA
RELAY SWITCH BOARD FOR BATTERYLESS SYSTEM

99400-011
DESCRIPTION
The Batteryless Telephone Board 99400-001 is designed and produced by Jotron Phontech AS.
The board is a plug-in module supporting switching facility for external signal device in the batteryless
telephone system.
The Relay board is compatible with BTS telephone types 4040 (Ver 05827), 4050, 4051, 4060 and
4061.
Switching capacity:
24 VDC: 150 VA
115 VAC: 700 VA
220 VAC: 1500 VA
Operation voltage:
Relay coil: 24 VDC
2 16.07.2010 REVISION, EM 1289 ASK ASK

1 20.08.2009 REVISION, EM 1213 CD This document is the property of JOTRON
PHONTECH and must not be copied or shown to a
0 09.05.2001 DVM COMPLETION t.ly third person without our written consent. In the
REV No: ISSUE DATE REASON FOR ISSUE PREPARED CHECKED APPROVED interest of product improvement, JOTRON
PHONTECH reserves the right to alter
TITLE: RELAY SWITCH BOARD FOR BATTERYLESS specification and design without notice.
SYSTEM SIZE: -- UED no: M002

DESCRIPTION DOC no: 99400-011-CA
FILE NAME: 99400-011-CA.doc
Page 1 of 1

Handbook page
40/50

Handbook page
41/50

Handbook page
42/50

Handbook page
43/50

Handbook page
44/50

Handbook page
45/50

Handbook page
46/50

Handbook page
47/50

Handbook page
48/50

Handbook page
49/50
Bilde omslag bak.indd 1 16.06.2009 08:45:31

Handbook page
50/50
www.jotron.com
Generell bakside.indd 1 30.01.2009 12:54:47


Phontech Bts 4000

Uploaded by

Copyright:

Available Formats

Phontech Bts 4000

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Phontech Bts 4000

Uploaded by

Copyright:

Available Formats

Handbook page

Downloaded from www.Manualslib.com manuals search engine

4040, Batteryless Telephone, 24L

4050, Batteryless Telephone, 1L

4051, Batteryless Telephone w/Amp, 1L

4060, Batteryless Telephone, 12L

4061, Batteryless Telephone w/Amp, 12L

99400-011, Relay Switch Board for BTS

Amplifier unit, 4000

4018, Headset Plugbox with Call Stop

9000, Relay Unit

Headset with PTT Switch, 0018

Headset with Chest Switch, 9010

Downloaded from www.Manualslib.com manuals search engine

BATTERYLESS TELEPHONE SYSTEM 4000

SIZE: -- UED no: --

Downloaded from www.Manualslib.com manuals search engine

Downloaded from www.Manualslib.com manuals search engine

Downloaded from www.Manualslib.com manuals search engine

2. LIST OF TELEPHONE UNITS

Type BTS 4040. 24 lines batteryless telephone.

2.1. 24 LINES BATTERYLESS TELEPHONE, TYPE 4040

Downloaded from www.Manualslib.com manuals search engine

2.2. 12 LINES BATTERYLESS TELEPHONE WITH INTEGRATED AMP, TYPE

Downloaded from www.Manualslib.com manuals search engine

3.1. AMPLIFIER UNIT, TYPE 4000

Downloaded from www.Manualslib.com manuals search engine

3.2. RELAY UNIT, TYPE 9000

3.3. PLUGBOX FOR HEADSET WITH CALL STOP, TYPE 4018

Downloaded from www.Manualslib.com manuals search engine

3.4. HEADSET WITH PTT SWITCH AND PLUG, TYPE 0018

3.5. HEADSET WITH PTT SWITCH, TYPE 9010

Downloaded from www.Manualslib.com manuals search engine

3.6. PLUG-IN RELAY MODULE (BRD 99400-011)

Open the backbox on the telephone unit.

4.1. BATTERYLESS AMPLIFIERT UNIT, TYPE 4000

- Interface for up to 24 batteryless telephones

Downloaded from www.Manualslib.com manuals search engine

4.2. 24 LINES BATTERYLESS TELEPHONE 4040

- Handset with PTT button.

4.3. SINGLE LINE BATTERYLESS TELEPHONE, TYPE 4050

- Handset with PTT button.

4.4. SINGLE LINE BATTERYLESS TELEPHONE WITH AMPLIFIER, TYPE 4051

- Handset with PTT button.

4.5. 12 LINES BATTERYLESS TELEPHONE, TYPE 4060

- Handset with PTT button.

Downloaded from www.Manualslib.com manuals search engine

4.6. 12 LINES BATTERYLESS TELEPHONE WITH AMPLIFIER, TYPE 4061

- Handset with PTT button.

5. BASIC MEANS OF OPERATION

5.2. MAKE A CALL TO ANOTHER STATION

- Lift the handset. (See illustration next page)

5.3. ANSWER A CALL FROM ANOTHER STATION

5.4. TERMINATE A CONVERSATION

- Replace the handset in the holder. (See illustration next page)

Downloaded from www.Manualslib.com manuals search engine

5.5. HEADSET (TYPE 9010) OPERATION

5.5.1. Make a call out from the telephone to another station

5.5.2. Answer a call from another station