Atarfil HD GM 13
Atarfil HD GM 13
Atarfil HD GM 13
06
EN 13361, EN 13362, EN 13491,
EN 13492, EN 13493, EN 15382
ATARFIL HD is a geomembrane manufactured from maximum quality high density polyethylene HDPE
resins, duly contrasted, that comply with the most rigurous requirements established for their use.
ATARFIL HD contains 97,5% of pure polymer, and approximately 2,5% of Carbon Black, antioxidants and
thermal stabilizers. The product does not contain plasticizers or fillers that can migrate over time.
The geomembrane ATARFIL HD is manufactured under permanent quality controls.
Tested Property Unit Test Method Value Teste d P ro pe rty Unit Te st Me tho d Value
3
Density of Raw Material g/cm ASTM D 792 0,932 Functional Pro pertie s Low Temperature
- ASTM D 746 No cracks
Brittleness (t: -40C)
Raw Material
Identification
3
Density of Geomembrane g/cm ASTM D 792 0,946 0.004
ASTM D 1238
Melt Flow Index g/10 min 0,40 Water Permeability m3/m2day UNE EN 14150 < 110 -6
(190C/2,16 Kg)
ASTM D 5885
(6 days)
Stress Crack Resistance/SP-NCTL h ASTM D 5397 3000
Thickness (min. ave) mm ASTM D 5199 nom nom nom nom nom nom
Lowest Individual of 10 values % -10
Mechanical Properties(1)
Tensile strength at Yield kN/m 13 (11) 18 (15) 26 (22) 35 (29) 44 (37) 53 (44)
Product
(3)
Elongation at Yield % ASTM D 6693 (Type IV) 13
lo 33mm (yield elongation)
Tensile strength at Break kN/m lo 50mm (break elongation) 23 (20) 31 (27) 47 (40) 62 (53) 78 (67) 94 (80)
Elongation at Break % 800 (700)
Tear Resistance N ASTM D 1004 101 (93) 135 (125) 205 (187) 273 (249) 342 (311) 410 (374)
Puncture Resistance N ASTM D 4833 240 320 480 640 800 960
Exploding Resistance % pr EN 14151 > 15
Dimensional Stability % ASTM D 1204 (100C, 1h) 1,5
PRESENTATION
Roll Length m 280 210 140 105 84 70
(Standard Sizes)
2
Surface m 1680/1764/2100 1260/1323/1575 840/882/1050 630/661/787 504/529/630 420/441/525
(1)
Values indicated are MEDIUM. In brackets minimum values.
(2)
Certificates belonging to the Environmental and Quality Integrated System of Atarfil.
(3)
The medium value is 18%.
(4)
Carbon black dispersion (only near spherical agglomerates) for 10 different views: 9 in Categories 1 or 2 and 1 in Category 3.
(*)
Geomembrane manufactured in Dubai Plant.
This information is provided for reference purposes. ATARFIL assumes no liability in connection with the use of this information or the final use of the product. It may be revised at any time or at least every two years, so it
is subject to change permanently.
Headquarters: Ctra. de Crdoba, Km 429 - Complejo El Rey E-18230 Atarfe GRANADA SPAIN Tel.: +34 958 439 200 Fax: +34 958 439 128
Middle East: P.O. Box 263 122 - Jebel Ali - DUBAI - U.A.E.
www.atarfil.com