Products Catalogue

Work Tools Loading Ramp

Tehnical Specification
Capacity 24 m3(15 TON) Of FFB/bay

Angle Chanel bar to shape an angle

of floor of 27 degree to horizontal

Drive hydraulic

Equipment - An operating platform

would be constructed
along side of fruit hopper
through the length of the
Welding Machine Automatic hopper.

- Equipped with tin roofs

- Equipped with hand rails

- Manufacture and
Complete Working Machines And Automa installation by experienced
personnel

Val Sterilizer
Tehnical Specification
Capacity 28.000 kg-30.000 kg

Dimension 11.500 mm Height x 3232 mm OD

Weight 13 tons for one unit

Lathe machine dia. 1400 Working
We make steriliser doors 3.45 bar/50 Psi
Pressure
Lathe length 9000mm,
can for shaft thresher Working
Plate roll machine with 135&0D[LPXP
temperature
four roller, can be used
for thicknesses up to 32 mm sheel plate 16 mm (boiler plate)

Type Vertical with Real cone

Thresher Structure & Rotary Drum Tehnical Specification
Capacity 15 To 17 tonnes FFB/hour

990 mm Width x 710 Height x 3860 Long

Tehnical Specification Dimension

Material
Body Mild steel
Capacity 45 tons FFB/Hour

Dimension Power 45 Kw.1450 rpm,380-415 V,50 Hz

6.000 mm Length x 2412 mm OD
Of Drum
Hydraulic Cone control system RRSC-1B
Dimension - The thresher would be of the
Of Structure rotating drum type with Switchboard Electricl control panel star
central shaft. deltafor 50 kw
- Shaft fabricated from high
tensile shaft (EN24) diameter
240 mm

Speed 24 Rpm Digester

Bearing Heavy duty pulmmer block
bearing size 6
Drive 30 HP electric motor C/w
gearbox,Fulley and V.Belt
connection to shaft by duplex
chain coupling

Screw Press
 Tehnical Specification Back Pressure Vessel
Capacity 3.500 liters
Tehnical Specification
Dimension 4.475 Height x 1.372 Diamet
Capacity 15 cu.M
Material - 12 mm mild stell,linner
mm stainless steel,bottom Dimension 7.200 mm Length x 1.200 ID Diameter
wera plate 10mm stainless
steel,bottom base plate 2 Weight 3.357 kg
mm mild steel
Working
3,5 kg/cm/150&
Shaft 115 mm EN709 EN 16 square shaft pressure @ Temp.

Type Direct steam injection digest Manufactured PT. Lambang jaya Lampung (Indonesia)

Weight 4.726 kg without drive Material From 12 mm boiler plates H2 or A516GR70

45 kw,1450rpm,380-415V,50 hz, Insulated externally with 50 thick rocwool

Drive TEFC with Pulley and V.Belt and covered with 1 mm thick aluminium sheets

Thermal Daerator Steam Separator

Tehnical Specification
Capacity 12.938 liters Tehnical Specification
Dimension 4.975 Length x 1.900 ID Capacity 35.000 kgs steam per hour

850 Length x 1353 Height x 522

Weight 8.452 kg Dimension
ID Diameter
OP : 0,35 kg/Cm2,DP 2,5 kg/cm2, Weight 733 kg
Pressure
TP 5,0 Kg/cm2
Design 2800 Kpa
Construction From 8mm thick from mild steel Pressure
Design
Strcuture WF 250 c/w support 232 C
Temperature
Provided platform & Ladder
Flange Standard PN 40
Connection
 Vacuum Dryer FFB Conveyor
Tehnical Specification
Capacity 15 tons/Hr

Dimension 4.180 Height x 962 ID Diameter

Weight 1.954 kg

- Including Spray nozzle

- Include Vacuum pump
- Include Dried oil Transfer
pump
- Include Sight glass

Tehnical Specification
Ripple Mill Capacity Fit the needs of the plant

Type Drag chain C/w scrapper

Chain Steel roler 6 Pitch,solit pin

Out put Speed 12 15 mtr liner per minute

Conveying section Bottom Deck

Drive 22 kw 380/360 V

Frame Mild steel,channel and angle

Tehnical Specification
Capacity 6 tons of nut per hour

Dimension 640 mm x 560 mm x 580 mm

Weight 457 kg (without drive)

Number of bars 36 pcs

Number of disk 4 pcs

Speed 1.200 Rpm

Type Ripple mill,horizontal rotor

Cake Breaker Conveyor (CBC) Cut & Fill

Tehnical Specification
Capacity Fit the needs of the plant

Dimension All size

Type Cut Without jacket

Speed 70 80 rpm

Power 11 kw 18,5 kw

Construction Multi section Flange joint

Sheel 8 mm thick mild steel plate

Jl. Raya Hajimena KM 14 No. 165
Natar - Lampung Selatan
35362 - Indonesia
t. : (0721) 703898 (Hunting)
f. : (0721) 703631 ; 787791
www.lambangjaya.com