SM-14

HYDRAULIC DRILLING RIG

 SM-14
MAIN FEATURES

1 - Crawler undercarriage with +/- 10°

oscillating tracks.

2 - Machine body including prime mover,

hydraulic plant with load SENSING control
and soundproof canopy.

3 - N° 2 hydraulic outriggers.

4 - Control levers for rig positioning.

5 - Articulated boom for mast

positionning.

6 - 4 x 90° turntable for mast rotation.

7 - 1000 mm stroke cylinder for mast

shoring.

8 - Rotary cradle with adjusting rollers

and 450 mm side-shifting device.

9 - Variable speed rotary head with

1207 daNm max torque, 221 rpm max
rotation.

10 - Floating system.

11 - Clamp max. diam. 315 mm.

12 - Breaker max. diam. 315 mm.

13 - Control board on rotating and pivoting

arm for drilling and service functions.

14 - Service winch with jib.

15 - Chain for hydraulic hoses.

4
 SM-14
HYDRAULIC DRILLING RIG

A new model Soilmec SM-14 is a multipurpose drilling rig. Its modular design is engineered for the execution of:
Micropiles, Tie-backs, Jet-Grouting, Coring, Drain, Water wells.
The rig is fitted with proportional, hydraulic servo-assisted controls that make the operations smooth and trouble
free even in the hardest weather conditions. Featured with Load Sensing System, it has lower running costs and a
reduced wear and tear on components.
Soilmec SM-14 versatility unit that can be tailored to any customer need or geological conditions:
- Variable speed or 3-speeds gear box;
- Hydraulic drifter;
- Vibrorotary;
- Rotop;
- Double Head.
Soilmec SM-14 may be further tailored with a wide range of optional items such as:
- Jet-Grouting kit for mono, bi or three fluids treatment and steeples lifting speed for ø 127 mm rods;
- 90° mast articulation for tie-back drilling (twin cylinder);
- Mast rotation by motoreducer for + _ 180°;
- Mast for 1.5, 1.8, 2.1, 3, 4 and 7 m stroke;
- Service crane for handling of drilling rods and for rods & casing;
- Foam Pump;
- Dust collector;
- Radio operated remote control;
- Rod carousel 6x114 and 10x114.

BASE MACHINE
Undercarriage with oscillating tracks
Track shoe width mm 400
Overall length mm 3062
Overall width mm 2300
Travelling speed km/h 2,7
Average ground pressure MPa 0,07
Diesel engine
Make and model CUMMINS QSB 4.5 - Tier III
Max Diesel Engine power (SAE J1995) kW (BHp) 123 (165) @ 2000 rpm
Fuel tank capacity liter 200
Electric motor (on request)
Make and model SIEMENS 4 POLS 50 Hz
Rated power kW (BHp) 90 (121) @ 1485 rpm
Hydraulic system
Oil tank capacity liter 400
Mast hoist & feed system
Feed Type Jack Gear motor
Feed stroke mm 4000 7000
Maximum hoist pull kN 89 87*
Maximum feed force kN 45 87*
Maximum speed (fast operation) rpm 28 28*
Clamp & hydraulic joint breaker
Nominal size mm 50 - 315 50 - 360 60 - 415
Maximum clamping force (28 MPa) kN 266
Maximum breaking torque daNm 5060
Winch and jib
Maximum line pull (1st layer) kN 20
Maximum rope speed (4st or 5st layer) m/min 60
Rope diameter mm 10
Rope capacity / Rope fitted m 46 / 40

JET GROUTING VERSION

Rod diameters mm 90 - 114 - 127**
Max treatment depth (T1/T1S-T2) mn 15400 / 16000
STD. WEIGHT (w/o options)
Std. Weight (w/o options) kg 13400
Noise level
Noise level LwA - dB 105
* Nominal **Special kit
 Vibrorotary. Is made up by combining one conventional rotary to a Vibro Hammer unit.
Advantages:
• Single or double drilling string for up to 219 mm o.d.;
• Lower skin friction of casing/rod (therefore less torque is needed);
• Higher efficiency compared to TH technology;
• Lower noise emission compared to DTH and TH technologies.
Variable speed rotary head. Any combination of torque and speed can be set from operator’s console
to get the most suited ratio for your drilling technology. Standard rotary may be easily modified on site, by
fitting purposely-designed kits, to get either higher torque or higher speed versions.
Rotary head with Rollstar gear box. It provides a maximum torque of 1300 daNm and a maximum speed
of 429 rpm.
Rotop. It combines Soilmec main reduction gear with one commercial brand hammering device.
Hydraulic Top Hammer. The rig design allows the assembling of any available top hammer brand with a
Single rotary maximum frequency of 2400 blow/minute and a maximum energy of 840 Nm.
Double head. Hydraulic system is sized to feed any options such as Rotary/Rotary, Rotary/Rotop and Rotary/Top
Hammer without compromising in power.

ROTARY HEAD S 900 G

Gear box type Rollstars 6 marce
Max. nominal torque daNm 916
Maximum drilling speed rpm 0-832
Passage mm 76
ROTARY HEAD RH 1200 V
Gear box type variable
Max. nominal torque daNm 1207
Maximum drilling speed rpm 0-221
Passage mm 114
Top Hammer ROTARY HEAD RH 1300 G
Gear box type Rollstars 6 marce
Max. nominal torque daNm 1290
Maximum drilling speed rpm 0-429
Passage mm 114
ROTARY HEAD HH 2500 V
Gear box type -
Max. nominal torque daNm 2400
Maximum drilling speed rpm 80
Passage mm -
TOP HAMMER
Weight up to kg 700
Blow frequency and impact energy 2400 / 840 shank up to C112
Max. Nominal torque daNm 1800
Double rotary

MAST MOVEMENTS
10°
10°
20°

16°
1147
 SM-14
STANDARD VERSION

Working condition DR-14 STANDARD DOUBLE ROTARY

Upper Rotary daNm 828
rpm max 323
Lower Rotary daNm 1207
rpm max 221

Stroke 4000
9853

500

-500

9915
6713
3537

2176
1739
729

15°
352

375
1076 3061 2137 2137 3061 2137
20°
21°

3971
30
°
2089

1516
 SM-14
JET GROUTING VERSION

20°

15° 15°
Corsa 16000 T1
Corsa 15403 T2

18713
Stroke 4000

(ø90)
Max.
Ø
2010

500

500 1076 3061 2137 2300

90°
°
90
90°

90°
2674

80°
20°
21°
 Optionals

Flushing pump Rod Carousel Lifting crane 90° mast articulation

SOILMEC distributes machinery and structures all over

03/2008-1000 -D-Cils-Il Digitale

the world, supported by SOILMEC subsidiary companies
and representative offices as:

SOILMEC LTD - U.K.

SOILMEC MISR S.A.E. Co. - Egypt
SOILMEC (H.K.) Limited - Hong Kong
SOILMEC JAPAN CO LTD - Japan
SOILMEC S.P.A. - Beijing Repr. Office - P.R. China
SOILMEC FAR EAST PTE.LTD - Singapore
SOILMEC ARABIA LLC - Saudi Arabia
SOILMEC EMIRATES - U.A.E.
SOILMEC GULF - U.A.E.
SOILMEC FRANCE S.A.S. - France
SOILMEC INDIA - India
SOILMEC S.P.A. - Moscow Repr. Office - Russia CERTIFIED QUALITY SYSTEM
SOILMEC DEUTSCHLAND GmbH - Deutschland
In 1990 Soilmec was awarded with the
SOILMEC NORTH AMERICA - Boston - USA
certification of its Quality System complying with
ISO 9001:2000 and ISO 14001:2004 standards.

SOILMEC S.p.A.
Drilling and Foundation Equipment
5819, via Dismano
47023 Cesena (FC) - Italy
tel. +39-0547-319111
fax +39-0547-318548
http:// www.soilmec.it
e-mail: soilmec@soilmec.it

All technical data are purely indicative and subject to change

without notice