SM-401

HYDRAULIC DRILLING RIG

Ground Engineering Equipment

 SM-401
HYDRAULIC DRILLING RIG
A new model Soilmec SM-401 is a multipurpose drilling rig. Its modular design is engineered for the execution of:
Micropiles, Tie-backs, Jet-Grouting, Coring, Drain, Water wells.
The rig is fitted with proportional, hydraulic servo-assisted controls that make the operations smooth and trouble
free even in the hardest weather conditions. Featured with Load Sensing System, it has lower running costs and
a reduced wear and tear on components.
Soilmec SM-401 versatility is perfectly shown by the availability of a wide range of rotary heads designed to
perform all known drilling technologies and to comply with the most stringent project requirements and to cope
with all the geological conditions:
Variable speed rotary head
Any combination of torque and speed can be set from operator’s console to get the most suited ratio for your
drilling technology. Standard rotary may be easily modified on site, by fitting purposely-designed kits, to get
either higher torque or higher speed versions.
Rotary head with Rollstar gear box
It provides a maximum torque of 1500 daNm and a maximum speed of 461 rpm.
Rotop
It combines Soilmec main reduction gear with one commercial brand hammering device.
Hydraulic Top Hammer
The rig design allows the assembling of any available top hammer brand with a maximum frequency of 2400
blow/minute and a maximum energy of 840 Nm.
Double head.
Hydraulic system is sized to feed any options such as Rotary/Rotary, Rotary/Rotop and Rotary/Top Hammer
without compromising in power.
Soilmec SM-401 may be further tailored with a wide range of optional items such as:
- Jet-Grouting kit for mono, bi or three fluids treatment and steeples lifting speed:
- 90° mast articulation for tie-back drilling;
- Mast rotation by motoreducer for + _ 180°;
- Mast for 1.5, 3, 4 and 6.5 m stroke;
- Service crane for handling of drilling rods;
- Foam Pump;
- Dust collector;
- Radio operated remote control.
Technical Data
UNDERCARRIAGE WITH OSCILLATING TRACKS
Track shoe width mm 400
Overall length mm 2998
Overall width mm 2300
Travelling speed km/h 2,7
Average ground pressure MPa 0,06
DIESEL ENGINE
Make and model CUMMINS QSB 5.9-30-T Tier II
Max Diesel Engine power (SAE J1995) kW (BHp) 119 (160) @ 200 rpm
Fuel tank capacity liter 200
ELECTRIC MOTOR (on request)
Make and model SIEMENS 4 POLS 50Kz
Rated power kW (BHp) 90 (121) @ 1485 rpm
HYDRAULIC SYSTEM
Hydraulic oil tank capacity liter 400
ROTARY HEADS HR 70 V HT 70 G HS 60 V HR 60G
Gear box type Variable 3 speeds Variable 3 speeds
Max. nominal torque daNm@rpm 1400 2000 230 1500
Maximum drilling speed rpm 238 200 915 461
MAST HOIST & FEED SYSTEM
Feed Type Jack Gear motor
Feed stroke mm 4000 6500
Maximum hoist pull kN 89 60
Maximum feed force kN 45 40
Maximum speed (fast operation) m/min 28 30
CLAMP & HYDRAULIC JOINT BREAKER
Nominal size mm 50-315 50-360 60-415 60-225 60-315
Maximum clamping force (28 MPa) kN 266 266 266 159 159
Maximum breaking torque daNm 5060 5060 5060 3830 4980
WINCH and JIB
Maximum line pull (1st layer) kN 25
Maximum rope speed (4st or 5st layer) m/min 57
Rope diameter mm 10
Rope capacity / Rope fitted m 52/40
NOISE LEVEL LwA-LpA 105 - 81
WEIGHT kg 13400 13400
1 - Crawler undercarriage with +/- 10°
oscillating tracks.
2 - Machine body including prime mover,
hydraulic plant with load SENSING
control and soundproof canopy.
3 - N° 2 hydraulic outriggers.
4 - Control levers for rig positioning.
5 - Articulated boom for mast positionning.
6 - 4 x 90° turntable for mast rotation.
7 - 1000 mm stroke cylinder for mast
shoring.
8 - Rotary cradle with adjusting rollers and
400 mm side-shifting device.
9 - Variable speed rotary head with 1400
daNm max torque, 238 rpm max
rotation.
10 - Floating system with standard rotary
head.
11 - Clamp max. diam. 415 mm.
12 - Breaker max. diam. 415 mm.
13 - Control board on rotating arm for
drilling and service functions.
14 - Service winch with jib.
15 - Guiding and lay-out device for
hydraulic hoses.

13 4

OPTIONALS

1 - Variable Speed Rotary

Heads.
2 - Double Head.
3 - Top hammer.
4 - Flushing Pump.
5 - Rod carousel for 6 or 2
rods depending on rig
configurations.
6 - Lifting Crane.
7 - 90° mast articulation
for tie back. 1 2 3
4 5 6 7
 SM-401
STANDARD VERSION

9856

6716
3563

2366
1713
732
367 400
316 1122 2998 2130 2300

Mast movements
9915

2649
2731

30°

21°
3946

1806
SM-401

3000
JET GROUTING VERSION

19500
MAX.
ø 90
Transport Condition

9915

2681

2039

1713
2312 2998 2130 1122 2998 2130

20

16
45°

2089

732
1491 1633
SM-401
MULTIPURPOSE SYSTEM

HT 70G

1028

1500-2000 STROKE
HR 60G

3000 STROKE

4000 STROKE

6500 STROKE
Ø225

HR 70V 594

1063 2997 2130

653
 SOILMEC distributes machinery and structures all over
the world, supported by SOILMEC subsidiary companies
and representative offices as:

SOILMEC LTD - U.K.

SOILMEC MISR S.A.E. Co. - Egypt
SOILMEC (H.K.) Limited - Hong Kong
SOILMEC JAPAN CO LTD - Japan
SOILMEC MALAYSIA - Malaysia
SOILMEC S.P.A. - Beijing Repr. Office - P.R. China
SOILMEC FAR EAST PTE.LTD - Singapore
SOILMEC EMIRATES - U.A.E.
SOILMEC GULF - U.A.E.

CERTIFIED QUALITY SYSTEM

In 1990 Soilmec was awarded the certification of its own
Quality System to ISO 9001/UNI 29001 series standards.

SOILMEC S.p.A.
Drilling and Foundation Equipment
5819, via Dismano
47023 Cesena (FC) - Italy
tel. +39-0547-319111
fax +39-0547-318548
http:// www.soilmec.it
e-mail: soilmec@soilmec.it

Ground Engineering Equipment