SAP - PM Module

OVER VIEW OF
SAP PM Configuration
Pack
Published by Team of SAP

Consultants at SAPTOPJOBS
Visit us at www.sap-topjobs.com
Copyright 2007-08@SAPTOPJOBS
All rights reserved. No part of this publication may be reproduced, stored in a

retrieval system, or transmitted in any form, or by any means electronic or
mechanical including photocopying, recording or any information storage and
retrieval system without permission in writing from SAPTOPJOBS
OVER VIEW INDEX
1. PM Technical Object Configuration ............................... 4
1.1 Define Planning Plant .................................................................................. 4
1.2 Assign Planning Plant.................................................................................. 5
1.3 Define Types of technical objects............................................................. 7
1.4 Define Plant Sections................................................................................... 9
1.5 Create Structure indicator for Functional Location ........................ 11
1.6 Define Category of Functional Location .............................................. 15
1.7 Define Field selection for functional Location ................................... 18
1.8 Assign user status to equipment category ......................................... 23
1.9 Define Measuring point categories ........................................................ 25
2. Master Data Configuration ...........................................28
2.1 Define BOM Status..................................................................................... 28
2.2 Define BOM Usage...................................................................................... 31
2.3 Define Default values for item status................................................... 35
2.4 Define Field Selection for Work center................................................. 39
2.5 Set Parameters............................................................................................. 44
2.6 Define Standard value keys..................................................................... 48
2.7 Define Task List usage keys .................................................................... 52
2.8 Maintain Control keys ............................................................................... 55
2.9 Define Serial Number Profile ................................................................... 60
2.10 Define Serialization Attributes for Movement types .................... 65
3. Maintenance Plan and Notification ...............................69
3.1 Define Maintenance planner group....................................................... 69
3.2 Set Maintenance Plan category .............................................................. 71
3.3 Define Number Ranges for maintenance Plans ................................ 74
3.4 Maintenance and Service Notification Type ....................................... 79
4. PM Order .....................................................................83
4.1 Configure order type .................................................................................. 83
4.2 Assign order types to Maintenance plants ......................................... 88
5. Equipment Calibration.................................................90
5.1 Maintain settings at plant level .............................................................. 90
5.2 Assign Inspection type to order types .................................................. 97
Hello Everyone,
A Ware Welcome To You All! We are really excited to offer the complete
SAP PM configuration pack to the SAP community. There were lot of
consultants who were after us to come up with pack and so we are glad
to present this to you… As you are aware that our SAP FICO, PP/QM,
MM/WM and SD have already achieved the best selling status and have
received lots of accolades and really helped the consultants take their
SAP knowledge and career to the next level …I am very confident that PM
configuration package will go a step forward and do much more than
that……….
For those who have been on our list and who have bought from us earlier
you all know that we have over-delivered on each of our configuration
packs and we want to do the same thing with SAP PM config pack too…
For those who have visited our site for the first time I would like to
welcome you to our site and promise you that we would do our best to
ensure that your life at the clients place would be very comfortable…
What I have done here is given you a brief of around 98+ pages of
content in PM pack so that you can have a feel of what it would be like in
terms of structure. The whole pack is extremely voluminous, step by step
guide this is just a feeler… So I hope you enjoy this…. So lets dive in….
1. PM Technical Object Configuration
1.1 Define Planning Plant
BACKGROUND
This configuration setting enables to define the planning plant.
Planning plant is the one where the planning of entire

maintenance activities is performed for several plants.
SCENARIO
Define IND6 as planning plant.
INSTRUCTION
Follow the Menu Path: IMG Enterprise Structure

Definition Plant Maintenance Maintain maintenance
planning plant
Click
Click
Enter planning plant. E.g. IND6.
Note: - when creating plant by copying from another plant, all

relevant information is copied.
Click
Click
1.2 Assign Planning Plant
BACKGROUND
This configuration setting enables to assign the planning

plant.
Assignment is establishing relation between planning plant

and maintenance plant.
SCENARIO
Assign IND6 planning plant to IND6 maintenance plant.
INSTRUCTION
Follow the Menu Path: IMG Enterprise Structure

Assignment Plant Maintenance Assign maintenance
planning plant to maintenance plant
Click
Enter the planning plant against the maintenance plant
Click
Click
1.3 Define Types of technical objects
BACKGROUND
This configuration setting enables to define the technical

object types.
Each equipment and functional location can be assigned to

technical object type. Technical object type is mainly used to
group the equipment of similar usage.
Grouping of equipment helps better reporting.
SCENARIO
Define technical object type.
INSTRUCTION
Follow the Menu Path: IMG Plant maintenance and

customer service Master data in Plant maintenance and
customer service Technical object General Data Define
Types of Technical Objects
Click
Click to create new technical object type
Maintain fields as explained below

Field Name Value and Description of field
Key identifying the object type.
E.g. 512 to indicate Generator
group.
Description of the object type.
E.g. Diesel Generators.
Click
Click
1.4 Define Plant Sections
BACKGROUND
This configuration setting enables to define the plant sections.
Plant section helps to subdivide the maintenance plant for

production responsibility. Person responsible will coordinate
between production and plant maintenance.
This can be used for evaluation purpose also.
SCENARIO
Define plant sections for IND6.
INSTRUCTION

customer service Technical object General Data Define
Plant Sections
Click
Click
Maintain the field as explained below

Key identifying plant. E.g.
IND6
Key identifying the plant
section. E.g. 100
Name of person responsible
Contact phone number
Click
Click
1.5 Create Structure indicator for Functional Location
BACKGROUND
This configuration setting enables to define the structure for

functional location.
This structure helps to identify the functional location exactly.
SCENARIO
Create functional location structure for IND6 as above.
INSTRUCTIONS

customer service Technical object Functional Locations
Create Structure indicator for Reference
Locations/Functional Locations
Click
Click to create new entries.

Key identifying the structure
indicator. E.g. IND6
Structure text. E.g. Structure
for IND6.
*** Enter the way the functional
locations is to be structure.
E.g.
hierarchy level *** Hierarchy level to indicate the
number of hierarchies.
*** - Edit mask field indicates the allowed type of character to

be created during functional location creation.
Allowed letters and signs are given below for ready reference.
"A" only letters can be entered

"N" only numbers can be entered
"X" both numbers and letters can be entered
"S" numbers, letters, and special characters can be entered
The following special characters are allowed:
&()+,./:;<=>
The following signs can be used:
- Hyphen
/ slash
' ' blank
. Period
_ Underscore
= equals sign
+ Plus sign
; Semicolon
: Colon
*** - Hierarchy level indicates the number of hierarchy. Each

number must be entered at the end of first level as shown
above. Numbers from 0 to 9 can be used for this. Level 10 is
represented by the figure 0, level 11 by the figure 1, and so on.
Click
Click
Impact of this configuration in Master Data /

Transaction
When creating functional location structure, it will be created

as per the structure setting maintained here.
Select the right structure indicator before creating functional
location.
1.6 Define Category of Functional Location
BACKGROUND
This configuration setting enables to define the functional

location category.
Functional Location category contains

Status profile
Partner determination procedure
Default value for measuring point
Field selection
Permit change document
Object info key
SCENARIO
Discuss functional location category.
INSTRUCTIONS

Define category of Functional Locations
Click

Key identifying the functional
location category. E.g. M
Enter description of functional
location category.
Tick in this check box will
document the change
document in the master
record.
identify the functional location
category as customer object.
provide other data screen
when maintaining technical
objects.
Respective profile, object info,
view profiles are maintained
here.
Click
Click

Transaction
When creating functional location structure, functional

location category defined here will be used.
1.7 Define Field selection for functional Location
BACKGROUND
This configuration setting enables to define the functional

location field selection.
Through this configuration setting it is possible to make a field

mandatory, optional, hide or view only.
It is required to make certain field to make mandatory

according to the business requirement.
SCENARIO
Make Manufacturer field as mandatory for functional location

category M
INSTRUCTIONS

Define field selection for Functional Locations
Click
Double click
Identify the manufacturer field as shown below

Double click on Manufacturer field
Click on
Click
Enter the functional location category as “M”
select radio button

Click
Transaction
When creating functional location with category M,

manufacturer field become mandatory.
1.8 Assign user status to equipment category
BACKGROUND
This configuration setting enables to assign the user defined

status to an equipment category.
User status can be used to assign specific status to a

equipment and to control further business transaction.
SCENARIO
Discuss assigning user defined status to equipment category.
INSTRUCTIONS

customer service Technical object Equipment Assign
user status profile to Equipment category.
Click
Assign the user status profile against equipment

category.
Click
Click
1.9 Define Measuring point categories
BACKGROUND
This configuration setting enables to define the measuring

point categories.
Measuring point categories are mandatory requirement for

measuring point.
It defines the following:
Measurement item uniqueness

Use of catalog type to enter readings
System response control when reading exceeds the
range
Tolerance time allowed for entering the reading in
future
SCENARIO
Discuss measuring point category setting.
INSTRUCTIONS

customer service Master Data in Plant maintenance and
customer service Basic settings Measuring point,
counters and measurement document Define Measuring
Point categories
Click
Click
Key identifying the measuring
point category. E.g. G
Description of measuring point
category. E.g. IND6 measuring
point category
Uniqueness of the measurement
position of this measuring point
category. This measurement
category may be used in many
places, if the measurement
position is required to be unique,
it can be achieved thro this
setting.
Select.1 from available entries
Allowed catalog type for entering

values. E.g. C. Select from
available entry.
Type of message when the
measurement reading is out of
range.
E.g. W for warning message.
Tolerance period in seconds to
record the measurement reading.
It is difficult to enter the reading
exactly at the exact SAP time i.e
measuring point.
E.g. 300 to indicate five minutes.
Click
Click
Transaction
When creating a measuring point inside the technical object,

measurement category must be maintained.
2. Master Data Configuration
2.1 Define BOM Status
BACKGROUND
This configuration setting enables to define BOM status.
BOM status is used to define whether the BOM can be used by

any application area or not.
Example: -
In the costing areas in a company, the BOM is exploded

according to the application. While defining the BOM
status, usage in costing area will be defined.
In MRP, the following indicators are checked directly from

the definition of the BOM status:
- Explosion in MRP
- Released for orders
MRP only reads BOMs whose BOM status has at least one of
these indicators.
BOM status defines whether the BOM is active or inactive.
SCENARIO
BOM need to be created for certain for product whose BOM

can be finalized only after some trial and error.
While it is in preparation it is required not to be used by any

application. Status “In preparation” has to be created.
INSTRUCTIONS
Follow the Menu Path: IMG Plant Maintenance and

customer services Master data in plant maintenance and
customer service Bills of materials Control data for Bills of
Material Define BOM status
1. Click
…..continuation of the above screen’s right side balance

portion
2. Click
3. Enter usage value. E.g. 6.
4. Leave all the check box as EMPTY.

5. Mention description as “In preparation”
6. Click Save .

Transaction
BOM with status 6 can not be used for any application.

2.2 Define BOM Usage
BACKGROUND
This configuration setting enables to define Bill Of Material

(BOM) usage.
BOM usage defines the usage of BOM in specific application

area in the SAP.
Example, there can be a separate BOMs for
Design,
Production
Costing.
In this way, each area is dealing only with the specific data it
requires.
Example:
The design BOM includes all the components of the

product and their technical data from the design point of
view. This BOM is generally not linked to any order.
The production BOM contains all the items required from

the production and assembly point of view. Only items
relevant to production, for which production data (such
as the issue storage location) can be entered, are
required. A production BOM does not contain any
packaging materials required in the shipping department.
SCENARIO
Create new BOM usage.
Note:-
Standard BOM usage available with SAP is sufficient. However

any new BOM usage can be created.
INSTRUCTIONS
customer service Bills of materials General Data BOM
Usage Define BOM usages
1. Click
2. Click
3. Enter usage value; it can be either numeric or alphabet.

It is suggested to be numeric.
4. Select +, - or . to indicate to which area this BOM is
meant for like Production, Engineering, Spare, Plant
Maintenance, Sales or for costing relevancy.
E.g. For usage 4, spare parts indicator is maintained as

optional (.).
Note:-Based on this, during BOM explosion, entire

dependent requirements are also planned,
5. Enter Usage text
6. Click Save

Transaction
When creating the BOM, key defined here will appear in the
BOM Usage field.
According to the requirement, BOM usage key has to be

selected during BOM Creation.
Click Match code or F4 in BOM usage field, to select the

desired BOM usage.
Transaction code to create BOM is CS01

2.3 Define Default values for item status
BACKGROUND
This configuration setting enables to define default values for

item status.
Every item in the BOM can be defined whether it is subjected

to
Costing
Sales
Production
Spare part
This configuration setting is used to indicate whether the BOM

component along with the BOM usage.
is to be considered for costing in this BOM or not,
is relevant to sales (normally used in Variant

configuration),
is a spare part group
is related to Production
SCENARIO
Set the default value for items in BOM.
INSTRUCTIONS
customer service Bills of materials General Data BOM
Usage Define Default values for item status
1. Click
2. Click
3. Enter Usage value
4. Update the following fields

Field Name Description Value
BOM usage Field defining the Enter value e.g. 1
BOM usage
Prod Indicating that the Make tick in the
BOM item is related check box
to Production
Eng/des Indicating that the Leave blank.
BOM item is related
to Engineering and
Design
Spare Spare part Enter A or B
indicator. Items
can be grouped
under spare parts
A group or group B.
this will help in
identifying spares
for replacement by
group A or group B
PM Indicating that the Leave blank
BOM item is related
to Plant
Maintenance
Sales Indicating the item Leave blank.
is related to Sales Normally used in
and it will appear variant
in the sales order. configuration.
Relevan Relevant to costing Select X , indicating
relevant to costing.
5. Click Save .

Transaction
Example:-
BOM usage defined 1 indicating relevant to production. The

item status as configured such that all items
are relevant to production
can be relevant to costing
In this example, the indicators are checked as follows:
The Indicator: item relevant to production cannot be

deselected (required entry). In the BOM maintenance
functions, this indicator is set automatically for all items
and cannot be cancelled.
Since the item can be relevant to costing, the default value

X (fully relevant to costing) can be set for the Indicator for
relevance to costing. This value can be overwritten in the
BOM maintenance functions.
BOM item level default setting will appear as per the setting
done here.
Note:- when creating BOM the usage 4 is mentioned, which in

turn identify this BOM as Plant maintenance BOM. Also
indicate item as spare part indicator group A.
This is used while exploding the BOM for spare parts

planning.
2.4 Define Field Selection for Work center
BACKGROUND
This configuration setting enables to make the field in work

center master data as
Mandatory
Optional
Highlight
Hide
Field selection will be used to make certain field as mandatory

entry or to hide certain fields during creation of work center
master data.
SCENARIO
Make field person responsible for work center category ZPM1

as mandatory field.
INSTRUCTIONS

customer services Maintenance plans, work centers, Task
lists and PRTs Work Centers General Data Define Field
Selection
Click
Double click Basic data
Select Req. radio button against
Double click Person responsible
Click Field selection Req. radio button for the required work
center category. Contents column indicate the work center
category.
click on to modify field selection

for new work center category.
Click If the desired work center category is not

available. E.g. ZPM1 category is not available.
Click to add more entry.

Enter content ZPM1 or any work center category.
Click radio button Req.
Click
Click

Transaction
When work center with category ZPM1 is created, person

responsible field become mandatory.
2.5 Set Parameters
BACKGROUND
This configuration setting enables to define Parameter

(activities) for formula.
Parameter is one of the required settings to calculate the

conversion cost incurred in the Work center during
manufacturing.
Work center while in use can consume
• Power
• Labour
• Setup time
• Depreciation
• Steam etc.
The above costs incurred during conversion will be captured

through the activity. Parameter is the structure to capture this
activity.
This will be assigned to the standard value key. Standard

value key will be assigned in the work center.
SCENARIO
Create a Parameter. Note: - Standard SAP setting is sufficient.

Let us discuss the creation of new parameter.
INSTRUCTIONS

lists and PRTs Work Centers General Data Set
Parameters
Click
Click
Maintain the Following fields
Field Description
Parameter Parameter to hold the value.
Any alphanumeric six digit
may be entered. E.g. LABOUR
Origin Place where from the value is
to be taken. E.g. To indicate
value to be taken from task
list maintain 2 in this field.
Short key word Short description
Key work Key word to identify
Dimension Dimension of the parameter.
E.g. Any thing related to
Duration may have TIME as
dimension.
Standard Value Unit Unit of this parameter. E.g.
Time dimension may have
unit as MIN.
Note: - If any parameter for which there is no unit, it may be

mentioned as no unit.
Click Save .

Transaction
Link between the parameter and the master data is as below.
a. This parameter will be assigned to the standard value

key.
b. Standard value key will be attached with the work center.
c. Work center will be attached in the task list. I.e. in the

routing or in the master recipe.
d. Standard value (i.e. duration of labor hours required) will

be maintained in the task list as a master data.
2.6 Define Standard value keys
BACKGROUND
This configuration setting enables to define the standard value

key.
Standard value key is very essential to capture the cost

incurred in the work center.
Standard value key will contain the activities. One standard

value key can contain up to six activities. Each activity refers
to the cost.
Example:-
• Production cost
• Set up cost
• Labour cost
• Quality Cost
• Power cost
• Steam cost
One work center can have only one standard value key.
SCENARIO
Create a standard value key to have the activities of setup,

machine, labor, steam and water.
INSTRUCTIONS

lists and PRTs Work Centers General Data Define
standard value keys
Click
Click
Field Description
Standard value key Enter any alpha numeric to
indicate standard value key.
E.g. STD1
Description Maintain standard value key
description. E.g.
setup/machine/labor/Power
Parameter Maintain the parameters. Up
to six parameters can be
maintained.
Tick this check box to
generate formula.
Click Save .

Transaction
When creating the work center, standard value key STD1 to be

mentioned.
2.7 Define Task List usage keys
BACKGROUND
This configuration setting enables to define the task list usage

to the work center.
Usage of work center to the specific task list (i.e. only in the
maintenance task list) can be defined to restrict its usage.
SCENARIO
Define the work center usage to the specific task list types.
INSTRUCTIONS

lists and PRTs Work Centers Task list Data Define task
list usage keys.
Click
Select
Double click Task list type
Click
Update the Following fields
Field Description
Task List type A for General maintenance
task list
E – Equipment task list
T – functional location task
list
Click Save .

Transaction
When creating Work center usage is to be mentioned as 004.
Once this is maintained, then it will not be possible to use this

Work center in Master Recipe or in Rate routing.
2.8 Maintain Control keys
BACKGROUND
This configuration setting enables to define control key.
Control key governs
• Scheduling of operation
• Cost calculation for an operation
• Capacity calculation for an operation
• Confirmation for an operation
Control key is mapped with the work center in the task list
(i.e. in the routing and in the master recipe).
SCENARIO
Create a control key with confirmation as mandatory and it

should calculate the cost and capacity, it should also schedule
the operation.
INSTRUCTIONS

lists and PRTs Work Centers Task list Data Define
control keys.
Click
Click
Field Description
Control Key Enter any alphanumeric four
digit key. E.g. YPM1
Description Maintain description of this
control key. E.g.
Sched,capacity,Cost,
Mustconfirm
Indicators Tick the check box as shown
above in the screen.
Tick in the Check box will
perform the respective
function to the operation /
phase which is having this
control key.
Click Save .
Click to maintain any long text to this

control key.
Maintain the long text.
Click Save .
Click
Click if you get the Other language screen.
Click Save .
Transaction
Link between control key and Transaction:-
Control key is attached in the task list with work center

for each operation
While performing order creation, confirmation, MRP run

system will behave according to this configuration
setting.
2.9 Define Serial Number Profile
BACKGROUND
This configuration setting enables to define the Serial number

profile.
Serial number profile must be assigned to material which is to

be handled with serial number. It is a plant level assignment.
It is possible to assign different profile in different plants.
Serial number profile controls

Assignment of serial numbers
Requirement of serial number to equipment type
System control on stock validation
Serial number proposal with equipment category
SCENARIO
Create Serial number profile for IND6 plant application
INSTRUCTIONS

customer services Master Data in Plant maintenance and
customer service Technical objects Serial number
management Define serial number profiles
Click
Click
Maintain the following fields

Field Description of field and value
Key identifying the serial
number profile. E.g. IND6
Text for serial number profile.
E.g. Equipment Sl.No.IND6
Tick in this check box will make
serial number mandatory before
performing the transaction. If it
is not ticked, serial number can
be assigned later.
E.g. Tick this check box for our
example purpose.
Equipment category to which
the serial number assignment
must be proposed. If not
specified, serial number from
internal number range will be
assigned automatically. E.g. Y
to pop up the serial number for
equipment category with Y.
Stock validation. Leave it blank.
Available entries are
Click
Select the above created row
Double click in the left side of the screen
Click
Field name Field description and value
Serial number assignment
procedure. I.e indicating the
business transaction at which
the serial number is to be
assigned. Available entries are
Select QMSL – to maintain the

serial number when
performing inspection for
equipment.
Indicating the assignment of
serial number as mandatory,
optional. Available entries are
Let us select Optional.

Assignment of serial number
to equipment master record.
01 – Serial number can be

assigned later
02 – Serial must be assigned
at the time of equipment
creation.
Note: - This setting can NOT
be changed later.
Click
Click

Transaction
Serial number profile defined here can be maintained in the

material master storage 2 view.
Also when making GR, serial number has to be assigned.
2.10 Define Serialization Attributes for Movement types
BACKGROUND
This configuration setting enables to define the Serial number

attributes for movement type wise.
It is possible to define a different procedure to different

movement types. By this, serial number assignment during
goods movement can be controlled per movement type wise.
SCENARIO
Discuss serialization attributes for movement types
INSTRUCTIONS

customer services Master Data in Plant maintenance and
customer service Technical objects Serial number
management Define serialization Attributes for movement
types
Click
Double click
Click

Key identifying the profile
already created. E.g. IND6
Procedure to be applicable.
E.g. MMSL
Movement type group for
serial number profile. Four
digit key linking Profile,
procedure and other control.
Indicating the assignment of
serial number as mandatory,
optional. Available entries are
Let us select Optional.

Assignment of serial number
to equipment master record.
01 – Serial number can be

assigned later
02 – Serial must be assigned
at the time of equipment
creation.
Note: - This setting can NOT
be changed later.
Click
Click
Double click
Assign the key mentioned under in the previous

setting. E.g. key 561 maintained in the previous setting.
By this that procedure and serial number creation control will

be more specific to movement type.
If for a specific movement type, if the serial number is to be
optional it can be done through this settings.

Transaction
Serial number requirement for each movement type will be

required according to the settings maintained here.
3. Maintenance Plan and Notification
3.1 Define Maintenance planner group
BACKGROUND
This configuration setting enables to define maintenance

planner group.
Maintenance planning group can be a person or a department.

It can be assigned to technical objects.
SCENARIO
Define planner group for IND6
INSTRUCTIONS

customer services Maintenance plans, Work centers, Task
Lists and PRTs Basic Settings Define maintenance
planner group
Click
Click

Key identifying the planning
plant. E.g. IND6
Key identifying the planner
group. E.g. IN6
Person or department name.
e.g. David to indicate name.
Contact number can be
entered if required for info
purpose.
Click Save .

Transaction
Maintenance planner will be used in the transaction.

3.2 Set Maintenance Plan category
BACKGROUND
This configuration setting enables to define Maintenance Plan

category.
Maintenance plan category defines which call object to be

generated for a maintenance plan when maintenance call is
due.
I.e. with reference to the maintenance plan, system can trigger

the following call objects.
Maintenance order
Service order
Maintenance order with maintenance notification
Service order with service notification
Maintenance order with WCM objects
Maintenance notification
Service notification
Service entry sheet
Inspection lot
Maintenance plan category defined can be assigned as a

default to users using parameter id WAT.
SCENARIO
Define maintenance plan category.
INSTRUCTIONS
Lists and PRTs Maintenance Plans Set Maintenance Plan
categories
Click
Click

Key identifying the
maintenance plan category.
E.g. I6
Text defining the maintenance
plan category. E.g. IND6 PM
order call
Select from the available
entry.
Available entries are
E.g. Select Maintenance or

service order.
create change document. E.g.
Tick the check box.
Confirmation for completing
the call object. It can control
scheduling of maintenance
plan after completion.
E.g. Tick this check box.
enable to create maintenance
plan with reference to outline
agreement.
Order category in which the
reference object to be used.
Select from available entries.
Repeat the above steps to create further maintenance plan
categories.
Click

Transaction
Maintenance plan categories defined here is used in

maintenance plan.
3.3 Define Number Ranges for maintenance Plans
BACKGROUND
This configuration setting enables to define number range for

maintenance plan.
Number range to the maintenance plan is assigned through

the maintenance plan category.
Note: - Number ranges are assigned directly in the production

system normally.
SCENARIO
Define number range for maintenance plan category I6.
INSTRUCTIONS

Lists and PRTs Maintenance Plans Define number ranges
for maintenance plans
Click
Click
Note I6 is not assigned with any number range.

To create additional group (additional number range) from the
top follow the menu path as shown below
Enter the required text, from number and To number.
Click
Click on
Click
Tick the required group check box. E.g.
Click
Click
Click

Transaction
Number range defined here will be used when performing the

relevant transaction
3.4 Maintenance and Service Notification Type
BACKGROUND
This configuration setting enables to define notification type.
Notification is the process of informing and recording any

deviation from the specification. SAP defined standard
notification types are
Customer complaint
Vendor complaint
Internal problem notification
Apart from the above types, any other type of notification can
be created according to the business requirements.
SCENARIO
Define Notification type for Breakdown maintenance type I6.
INSTRUCTIONS

customer services Maintenance and Service Processing
Maintenance and Service Notifications Notification creation
Notification Types Define Notification Types
Click
To create new notification type, it is suggested to copy from
the standard Notification type.
Select Notification type M1 by pressing the grey box in the left.
Click
Field Name Field description and value
Key identifying the notification
type
Origin of notification. Select
from available entries.
E.g. malfunction report

Date and time to propose
when completing notification.
E.g. C to indicate
malfunctioning end.
It is used to define object or
subject when creating
maintenance notification.
Select from available entries.
Catalog profile is the collection
of codes and code group. We
will discuss about it later.
LIS structure update control
Leave it as it is with SAP
standard settings.
assign the notification number
immediately on start of
transaction rather than
assigning number at the time
of saving.
Number range copied from the
source as 01
Click
Click

Transaction
New notification type with I6 can be created.

4. PM Order
4.1 Configure order type
BACKGROUND
This configuration setting enables to define order type.
An order type holds control of various parameters which we

are going to discuss one by one. Different order types are
defined to indicate the different maintenance process.
E.g. one order type for Preventive maintenance, another order

type for breakdown maintenance etc.
SCENARIO
Define order type IBD6 for Breakdown maintenance.
INSTRUCTIONS

customer services Maintenance and Service processing
Maintenance and Service Orders Functions and settings for
Order types Configure Order Types
Click
Note: - When creating new order types it is recommended to
copy from existing one.
Let us copy from PM01 to create IBD6
Select the row to copy from. E.g. PM01

Click
Change the order type and description as shown below

Field name Field description and
value
Key identifying the
order type. E.g. IBD6.
Also enter the
description in the next
window. E.g.
Maintenance Order for
Breakdown
Costing related setting.
Leave it as it is.
Costing related setting

defining settlement
profiles and budget
profile. Settlement
profile will be copied to
settlement rule.
Discuss with CO
member and maintain
this .
Tick in this check box
will release
maintenance order
immediately. Note:- If
maintenance order is
created through
maintenance call i.e
notification, then order
will be automatically.
Click
Click

Transaction
Order type defined here can be used when creating

maintenance order for breakdown.
4.2 Assign order types to Maintenance plants
BACKGROUND
This configuration setting enables to assign the order type to

maintenance plant.
We can define any number of order type, but each order must
be assigned to maintenance plant where the physical
maintenance task is carried out.
Maintenance order will be created only in maintenance plant.
SCENARIO
Assign order type IBD6 to maintenance plant IND6.
INSTRUCTIONS

Order types Configure Number ranges
Click
Click
Maintain the entries as shown below

Click
Click

Transaction
Order type is assigned to maintenance plant.

5. Equipment Calibration
5.1 Maintain settings at plant level
BACKGROUND
This configuration setting enables to define the settings at

plant level.
When QM module is to be implemented, plant level settings

are needed to be maintained. Following setting at plant level
can be managed through this setting.
Version control for Master Inspection

characteristics and Inspection method,
Plant level sampling procedure
Code and selected set at plant level for valuation
Automatic usage decision waiting time
SCENARIO
Maintain Plant parameter of QM setting for plant IND6. It is

required to maintain Plant level UD code and waiting time for
automatic UD.
INSTRUCTIONS
Follow the Menu Path: IMG Quality Management Basic

settings Maintain settings at plant level.
Click
Click and type IND6
Click
Select plant IND6 by clicking grey box in the left side.
Click
Note:- Default settings are sufficient to do with QM

module. However important settings along with the screen
shots are explained below.
Update the Following fields

Field Description
assign version to the Master
Inspection Characteristics
automatically during creation
and change.
assign version to the
Inspection method
automatically during creation
and change.
Click
Insp.Lot creation Tab screen
No settings are to be done here.
Click
Result recording Tab screen

- “Automatic close” When performing the result
recording, automatically characteristics will be evaluated and
closed.
Proposal for inspection point valuation:-
To valuate the inspection point, selected set, code and code

group can be maintained at plant level.
This will be referred incase of any missing data in the master

data.
No other settings are to be done here.
Click
InsLot completion Tab screen
Automatic Usage decision:-
To configure Automatic Usage decision waiting time should be

mentioned.
Automatic UD will be performed after this time is elapsed from

the result recording.
Note: - Auto UD program has to be run to make auto UD.
Batch Valuation check box to be ticked, if batch updating is to

be done without material specification. E.g. Leave it blank.
Click
General settings Tab screen
No settings are to be done here.
Click Save .

Transaction
Over all maintenance of the above will control,
Automatic creation of versions for MIC during

creation and change
Selected set at plant level may be used during

result recording
Automatic usage time elapse duration may be

mentioned here
5.2 Assign Inspection type to order types
BACKGROUND
This configuration setting enables to define the inspection type

to maintenance or service order type.
For calibration of equipment, it is required to record the

results for that equipment. To perform any inspection,
inspection lot with appropriate inspection type is a must.
With this configuration setting inspection type 14 is assigned

to required maintenance order type.
SCENARIO
Define the inspection type 14 to order type.
INSTRUCTION

Order types Assign inspection type to maintenance/Service
order types
Click
Inspection type 14 (for calibration of equipment) is assigned to
order type PM05.
Click
Click
Click

Transaction
While creating maintenance order from object call

(notification), inspection lot with type 14 will be created.
That’s it then… As it told you earlier the entire PM configuration pack

comes in 7 voluminous content based power packed CDS and each sub
module in SAP PM is broken into Configuration, End user and Power
point and there are tons of bonuses coming with this pack along with all
other Integration documents, PM Interview questions and answers and a
boatload of step by step guides……… You can take advantage of the
special offer by visiting the site at
http://www.sap-topjobs.com/SpecialPP/sappm20071919.html
All our packs are shipped thru FedEx and reaches you in three days
time. One more thing this configuration pack is compatible with version
4.7, version 5.0 and 6.0 So you really do have to worry about the version
at all.. We have taken care of that… Also all future version changes
which will come up will be provided as free updates to you. So you can
sit back relax and play the music….
What I want from you now is to do yourself a favour by bringing the

brains and wisdom of 10+yrs of SAP PM Experts to your drawing room
today. Do it right now my dear friend and take your SAP career to the
next level…. You will love it I promise you….
http://www.sap-topjobs.com/SpecialPP/sappm20071919.html

SAP - PM Module

Uploaded by

Copyright:

Available Formats

SAP - PM Module

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

SAP - PM Module

Uploaded by

Copyright:

Available Formats

OVER VIEW OF

Published by Team of SAP

All rights reserved. No part of this publication may be reproduced, stored in a

This configuration setting enables to define the planning plant.

Planning plant is the one where the planning of entire

Define IND6 as planning plant.

Follow the Menu Path: IMG Enterprise Structure

Enter planning plant. E.g. IND6.

Note: - when creating plant by copying from another plant, all

1.2 Assign Planning Plant

This configuration setting enables to assign the planning

Assignment is establishing relation between planning plant

Assign IND6 planning plant to IND6 maintenance plant.

Follow the Menu Path: IMG Enterprise Structure

Enter the planning plant against the maintenance plant

This configuration setting enables to define the technical

Each equipment and functional location can be assigned to

Grouping of equipment helps better reporting.

Define technical object type.

Follow the Menu Path: IMG Plant maintenance and

Maintain fields as explained below

This configuration setting enables to define the plant sections.

Plant section helps to subdivide the maintenance plant for

This can be used for evaluation purpose also.

Define plant sections for IND6.

Follow the Menu Path: IMG Plant maintenance and

Maintain the field as explained below

This configuration setting enables to define the structure for

This structure helps to identify the functional location exactly.

Create functional location structure for IND6 as above.

Follow the Menu Path: IMG Plant maintenance and

Maintain fields as explained below

*** - Edit mask field indicates the allowed type of character to

"A" only letters can be entered

The following signs can be used:

*** - Hierarchy level indicates the number of hierarchy. Each

Impact of this configuration in Master Data /

When creating functional location structure, it will be created

This configuration setting enables to define the functional

Functional Location category contains

Discuss functional location category.

Follow the Menu Path: IMG Plant maintenance and

Click to create new entries.

Maintain fields as explained below

Impact of this configuration in Master Data /

When creating functional location structure, functional

This configuration setting enables to define the functional

Through this configuration setting it is possible to make a field

It is required to make certain field to make mandatory

Make Manufacturer field as mandatory for functional location

Follow the Menu Path: IMG Plant maintenance and

Identify the manufacturer field as shown below

Enter the functional location category as “M”

select radio button

When creating functional location with category M,

This configuration setting enables to assign the user defined

User status can be used to assign specific status to a

Discuss assigning user defined status to equipment category.

Follow the Menu Path: IMG Plant maintenance and