Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 163 views

    Genesys GPF

    Uploaded by

    ramonmza
    Genefloc GPF is a membrane compatible flocculant that can be used to improve filtration performance and reduce cleaning frequency. It works by reducing the silt density index of water being filtered. Genefloc GPF is compatible with polyamide membranes and does not foul them like conventional coagulants. It is effective against a range of particulate matter and can be dosed continuously at rates of 1-4 mg/L.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Genesys GPF

    Uploaded by

    ramonmza
    163 views1 page
    Genefloc GPF is a membrane compatible flocculant that can be used to improve filtration performance and reduce cleaning frequency. It works by reducing the silt density index of water being filtered. Genefloc GPF is compatible with polyamide membranes and does not foul them like conventional coagulants. It is effective against a range of particulate matter and can be dosed continuously at rates of 1-4 mg/L.

    Original Description:

    jkg

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Genefloc GPF is a membrane compatible flocculant that can be used to improve filtration performance and reduce cleaning frequency. It works by reducing the silt density index of water being filtered. Genefloc GPF is compatible with polyamide membranes and does not foul them like conventional coagulants. It is effective against a range of particulate matter and can be dosed continuously at rates of 1-4 mg/L.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    163 views1 page

    Genesys GPF

    Uploaded by

    ramonmza
    Genefloc GPF is a membrane compatible flocculant that can be used to improve filtration performance and reduce cleaning frequency. It works by reducing the silt density index of water being filtered. Genefloc GPF is compatible with polyamide membranes and does not foul them like conventional coagulants. It is effective against a range of particulate matter and can be dosed continuously at rates of 1-4 mg/L.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    To find out more and download our

    published papers visit our website at

    www.genesysro.com

    Genefloc GPF
    Product data Sheet

    Membrane Compatible Flocculant


    To minimise membrane fouling and
    reduce cleaning frequency the silt
    density index (SDI) should be kept as
    low as possible. Genefloc GPF can be
    used to improve the performance of
    filtration equipment and has been
    developed as a general-purpose
    flocculant for use in surface, well and
    process waters with medium to high
    SDI values.
    Genefloc GPF is compatible with Improves Filtration Performance

    polyamide membranes and does not


    foul membranes like conventional iron
    and aluminium based coagulants.

    Application
    Genefloc GPF should be dosed continuously to the feed water
    allowing at least 5 minutes contact time before filtration. Dose rate
    can be optimised by on site jar testing and SDI analysis.

    Typical dose rate of Genefloc GPF is 1- 4 mg/L. Reduces Silt Density Index

    Genefloc GPF can be diluted and is fully miscible with water in all
    Improves the performance of filtration equipment
    proportions.
    Effective against a wide range of particulate matter
    Health and Safety
    Compatible with polyamide membranes
    Genefloc GPF is an aqueous solution of a polyquaternary amine. It is
    compatible with carbon steel and other commonly used materials of Reduces plant cleaning frequency
    construction. Observe all safety precautions shown in the material
    safety data sheet, available on request.
    Typical properties
    Packaging Appearance: pale liquid
    Available in 25 kg kegs, 200 kg drums and 1,000 kg IBCs. pH as supplied: 5.0 7.0
    The shelf life is two years under normal storage conditions. Specific gravity: 1.03 - 1.05
    Genefloc GPF is a viscous liquid at low temperatures. Freezing point: < -2C

    The information provided in this data sheet is believed to be true and accurate.
    Genesys International Ltd. accepts no product liability as the use of its products are outside
    the companys control.

    Genesys International Limited 3A Aston Way, Middlewich, Cheshire, UK, CW10 0HS
    t: +44(0)1606 837 605 f: +44(0)1606 837 558 e: info@genesysro.com
    August 2015. v3.0

    You might also like