Instructions for Use

Leica HI1220
Flattening Table

Instructions for Use V3.2 RevE, English 02/2013

Order No.: 14 0423 80101
 NOTE

The information, numerical data, notes and value These are determined only by the contract
judgments contained in this manual represent provisions agreed between ourselves and our
the current state of scientific knowledge and customers.
state-of-the-art technology as we understand it Leica reserves the right to change technical
following thorough investigation in this field. specifications as well as manufacturing process-
We are under no obligation to update the pres- es without prior notice. Only in this way is it pos-
ent manual periodically and on an ongoing basis sible to continuously improve the technology and
according to the latest technical developments, manufacturing techniques used in our products.
nor to provide our customers with additional cop- This document is protected under copyright laws.
ies, updates etc. of this manual. All copyrights to this documentation are held by
To the extent permitted in accordance with Leica Biosystems Nussloch GmbH.
the national legal system as applicable in each Any reproduction of text and illustrations (or of
individual case, we shall not be held liable for any parts thereof) by means of print, photocopy,
erroneous statements, drawings, technical illus- microfiche, web cam or other methodsinclud-
trations etc. contained in this manual. In particu- ing any electronic systems and mediarequires
lar, no liability whatsoever is accepted for any express prior permission in writing by Leica
financial loss or consequential damage caused Biosystems Nussloch GmbH.
by or related to compliance with statements or For the instrument serial number and year of
other information in this manual. manufacture, please refer to the nameplate on
Statements, drawings, illustrations and other the back of the instrument.
information regarding the contents or technical
details of the present Instructions for Use are
not to be considered warranted characteristics Leica Biosystems Nussloch GmbH
of our products.

Leica Biosystems Nussloch GmbH

Heidelberger Str. 17 - 19
D-69226 Nussloch
Germany
Phone: +49 (0)6224 143-0
Fax: +49 (0)6224 143-268
Internet: http://www.LeicaBiosystems.com

Leica HI1220 Flattening Table 3

Table of Contents

1. Important Information.....................................................................................................5
1.1 Symbols and their meanings....................................................................................................... 5
1.2 Qualification of personnel............................................................................................................ 6
1.3 Intended use of instrument.......................................................................................................... 6
1.4 Instrument type.............................................................................................................................. 6
2. Safety.................................................................................................................................7
2.1 Safety notes.................................................................................................................................... 7
2.2 Warnings......................................................................................................................................... 8
3. Instrument Components and Specifications..............................................................9
3.1 Technical data................................................................................................................................ 9
4. Instrument Setup............................................................................................................10
4.1 Installation site requirements.................................................................................................... 10
4.2 Unpacking and setting up the HI1220....................................................................................... 10
4.3 Setting up the power supply...................................................................................................... 11
5. Operation.........................................................................................................................12
5.1 Control panel fields on the instrument..................................................................................... 12
5.2 Switching the instrument on...................................................................................................... 12
5.3 Setting the temperature............................................................................................................. 13
5.4 Switching off the instrument..................................................................................................... 13
6. Cleaning and Maintenance.........................................................................................14
6.1 Cleaning the instrument............................................................................................................. 14
6.2 Replacing fuses............................................................................................................................ 14
7. Warranty and Service...................................................................................................15

4 Instructions for Use V3.2 RevE 02/2013

 1.Important Information

1.1 Symbols and their meanings

Warnings appear in a gray box and are Instrument surfaces which become hot
marked by a warning triangle . during operation are marked with this
symbol.
Avoid direct contact with these surfaces
Notes, - they may cause burns.
i.e. important user information, appear
in a gray box and are marked by an
information symbol . The CE labeling shows that the product
corresponds to one or more applicable
European directives.
(5) Numbers and parentheses refer to item
numbers in the illustrations. Environmental protection symbol of the
China RoHS directive. The number in the
symbol indicates the "Environment-friendly
START Function keys to be pressed on the Use Period" of the product. The symbol is
instrument control panel are in bold- used if a substance restricted in China is
print capital letters. used in excess of the maximum permitted
limit.
Manufacturer
Symbol for labeling electrical and electron-
ic equipment in accordance with Section7
of the German Electrical and Electronic
Observe the instructions for use!
Equipment Act (ElektroG). ElektroG is the
law regarding the sale, return and environ-
Serial number mentally sound disposal of electrical and
SN
electronic equipment.
REF Order no.

The package contents are fragile and must

be handled with care.

Indicates the correct upright position of the

package.

Leica HI1220 Flattening Table 5

1. Important Information

1.2 Qualification of personnel 1.4 Instrument type

The Leica HI1220 may be operated by trained All information provided in these Instructions for
laboratory personnel only. Use applies only to the instrument type indicated
All laboratory personnel designated to operate on the cover page.
this instrument must read these Instructions A nameplate indicating the instrument serial num-
for Use carefully and must be familiar with all ber is attached to the rear side of the instrument.
technical features of the instrument before
attempting to operate it.

1.3 Intended use of instrument

The HI1220 microscope slide flattening table for
paraffin sections is a heating plate with high heat
output and precise temperature control.
The HI1220 is suitable for flattening and drying
cut tissue samples in all fields of biomedical
research and routine diagnostics. Fig. 1

Fig.1 is provided as an example only

Any other use of the instrument is and shows a valid nameplate for this
considered improper. instrument with the necessary in-
Failure to adhere to these instructions formation about instrument type and
may result in an accident, personal power requirement. The precise data
injury, damage to the instrument or for the various versions is specified in
accessory equipment. Chapter 3.1 "Technical data".
Proper and intended use includes
compliance with all inspection and
maintenance instructions, along with
the observance of all instructions in
the Instructions for Use.

6 Instructions for Use V3.2 RevE 02/2013

 2.Safety

2.1 Safety notes

The safety and caution notes in this chapter must be observed at all times.
Be sure to read these notes even if you are already familiar with the operation and use of
other Leica products.
The protective devices located on the instrument and the accessories must not be removed
or modified. Only qualified service personnel authorized by Leica may repair the instrument
and access its internal components.
Residual risks
The instrument has been designed and constructed with the latest state-of-the-art technol-
ogy and according to recognized standards and regulations with regard to safety technology.
Operating or handling the instrument incorrectly can place the user or other personnel at
risk of injury or can cause damage to the instrument or other property. The instrument may
be used only as intended and only if all of its safety features are in proper working condition.
Malfunctions which could impede safety must be remedied immediately.
Only original spare parts and permitted original accessories may be used.

These Instructions for Use include important instruc- This instrument has been built and tested in accor-
tions and information related to the operating safety dance with the safety requirements for electrical
and maintenance of the instrument. equipment for measurement, control, and laboratory
The Instructions for Use are an important part of the use.
product, and must be read carefully prior to startup To maintain this condition and ensure safe operation,
and use and must always be kept near the instrument. the user must observe all notes and warnings con-
tained in these Instructions for Use.
These Instructions for Use must be ap-
propriately supplemented as required
The instrument's CE certificate can be
by the existing regulations on accident
found on the Internet at:
prevention and environmental safety in
http://www.LeicaBiosystems.com
the operator's country.

Leica HI1220 Flattening Table 7

2. Safety

2.1 Safety notes (continued)

In order to properly service the instrument, it is indispensable to read the User Manual before
switching on the instrument and to familiarize yourself with all technical details.
Before connecting the instrument to the line voltage, ensure that the electrical power require-
ments of your laboratory match the values on the nameplate of the instrument.
When installing the power cable, always be sure to route it so that it cannot contact the
heated surfaces of the instrument at any time.
The instrument is designed for indoor use only.
The instrument must be switched off and unplugged from the power supply during all repair
and service work.
During operation, the instrument surface can be very hot.

Risk of injury!
Do not store any combustible and flammable substances near the instrument.

2.2 Warnings
The safety devices installed in this instrument by the manufacturer only constitute the basis
for accident prevention. Operating the instrument safely is, above all, the responsibility of the
owner, as well as the designated personnel who operate, service or repair the instrument.
To ensure trouble-free operation of the instrument, make sure to comply with the following
instructions and warnings.
Please note that electrostatic charge may result through direct or indirect contact with the
Leica HI1220.

8 Instructions for Use V3.2 RevE 02/2013

 3.Instrument Components and Specifications

3.1 Technical data

Nominal supply voltages: Two factory-preset voltages (not user-adjustable):

100-120VAC +10%
230-240VAC +10%

Nominal frequency: 50/60Hz

Nominal power: 350VA

Main fuse: 2 melting fuses, 5x20mm, UL-approved

For 100-120V: 5x20mm, 2x T 5A L250VAC
For 230-240V: 5x20mm, 2x T 2.5A L250VAC

Dimensions: 350x310x100mm

Empty weight: 3.6kg (w/o packaging)

Relative humidity: 20-80%, non-condensing

IEC 1010 classification: Protection class: 1

Pollution degree: 2
Overvoltage category: II

Operating temperature range: +15C to +40C

Temperature control range: Room temperature to 75C

Operating elevation: maximum of 2000m above sea level

IP protection class (IEC 60529): IP20

Leica HI1220 Flattening Table 9

4. Instrument Setup

4.1 Installation site requirements

When installing the power cable, always be sure to route it so that it cannot contact the
heated surfaces of the instrument at any time.
The power socket to which the instrument is to be connected to has to be located near the
instrument and easily accessible.
The power supply must be at a distance no greater than the length of the power cable an
extension cable must NOT be used.
The substrate must be largely vibration-free and have sufficient load capacity and rigidity
for the weight of the instrument.
Avoid impacts, bright direct light, and excessive temperature fluctuations.
The instrument must be connected to a suitable power socket. Use only the provided power
cable, which is intended for the local power supply.

4.2 Unpacking and setting up the HI1220

Set the carton on a flat surface, cut through

the adhesive tape (Fig. 2) and open the
carton (Fig. 3).

Fig. 2

Fig. 3

10 Instructions for Use V3.2 RevE 02/2013

 4.Instrument Setup

4.2 Unpacking and setting up the HI1220 (continued)

Remove the accessories and carefully lift the Hold the instrument firmly with one hand, pull off
instrument out of the carton (Fig. 4). both foam sections (Fig. 5) and remove the dust
cover.

2


Fig. 4 Fig. 5

4.3 Setting up the power supply

Before connecting the power cable, make

sure that the power switch (3) on the rear of
the instrument (Fig. 6) is switched to "0" = OFF.
Use the instrument with the provided power
cable only.
Insert the connector of the power cable
(Fig.5,2) into the connection socket (4) and
plug the power plug into the power socket 3 4 Fig. 6

Leica HI1220 Flattening Table 11

5. Operation

5.1 Control panel fields on the instrument

5 = POWER LED
Is illuminated when the instrument
is switched on with the main power
switch.
6 = SET
Indicates the selected target tempera-
10
ture.
7 = Set key: lower temperature.
8 = Set key: increase temperature.
9 = RUN/STOP
Switch instrument on or off.
10 = Display
5 6 7 8 9 Fig.7

5.2 Switching the instrument on

Switch on the instrument with the power switch on the left rear panel of the instrument
(Fig.6, 3).
The green LED display POWER on the front panel is then illuminated.

12 Instructions for Use V3.2 RevE 02/2013

 5.Operation

5.3 Setting the temperature

Pressing the RUN/STOP button on the front panel brings the temperature of the instrument
to the latest stored target value. The displayed temperature corresponds to the current
actual value.
The set target temperature is shown in the display (Fig. 7, 10).
To adjust to the desired temperature, hold down the corresponding set key (Fig. 7, 7+8). The
display changes slowly for the first 8 digital steps, then more quickly after that.

The temperature display refers to the target value. After the desired temperature is
reached, release the set key. The displayed value is saved automatically. This stored
target value will continue to be displayed for about 2seconds, then the current actual
temperature display will appear again.

The target temperature can be checked by pressing the SET key (Fig. 7, 6).

After changing the target temperature, the temperature may temporarily rise once a lit-
tle. Therefore extremely temperature-sensitive samples should not be positioned until
after reaching the set temperature (observe the temperature display!).

The target value remains saved both when the instrument is switched off (RUN/STOP
key or power switch) and in case of power failure and disconnection from the power
supply.

5.4 Switching off the instrument

The instrument can be switched off by pressing the RUN/STOP key.

You do not have to switch the main power switch on or off each time for everyday
routine use.

Leica HI1220 Flattening Table 13

6. Cleaning and Maintenance

6.1 Cleaning the instrument

Before cleaning the instrument, turn off using the power switch (Fig. 6, 3) and disconnect
from the power supply.
The instrument has a continuous front panel and no lateral cooling slots, so the surfaces
are smooth and easy to clean.
All surface materials are resistant to common laboratory detergents.

The instrument must be switched off and have cooled down for cleaning.

Do not use organic solvents (e.g. alcohol or xylene)!

6.2 Replacing fuses

Switch the unit off and unplug it. Use

only the supplied replacement fuses. 11
Both fuses must have the same rating
(check the imprint!). Fuses must always
be switched out in pairs.

Insert a small screwdriver into the cutout

(Fig.8, 11) and carefully pry out the fuse
insert (12).

Remove the fuse holder and replace the de-
fective fuses with two new ones (13).
Then reinsert the fuse holder and press it 13 12
into place.

Fig. 8

14 Instructions for Use V3.2 RevE 02/2013

 7.Warranty and Service

Warranty
Leica Biosystems Nussloch GmbH guarantees that the contractual prod-
uct delivered has been subjected to a comprehensive quality control
procedure based on the Leica in-house testing standards, and that the
product is faultless and complies with all technical specifications and/
or characteristics warranted.
The scope of the warranty is based on the content of the concluded
agreement. The warranty terms of your Leica sales organization or the
organization from which you have purchased the contractual product
shall apply exclusively.

Service information
If you require technical service or replacement parts, please contact
your Leica sales office or dealer who sold the product.
The following inputs are required:
Model name and serial number of the instrument.
Location of the instrument and name of a contact person.
Reason for the service call.
Date of delivery.

Decommissioning and disposal

The instrument or parts of the instrument must be disposed of according
to existing applicable, local regulations.
Special attention should be paid to the lithium cell of the electronic
circuit board!

Leica HI1220 Flattening Table 15

Notes

16 Instructions for Use V3.2 RevE 02/2013

www.LeicaBiosystems.com

Leica Biosystems Nussloch GmbH

Heidelberger Strae 17-19
D- 69226Nussloch
Phone: +49 6224 - 143 0
Fax: +49 6224 - 143 268
Web: www.LeicaBiosystems.com