Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

Assignment Transformer

Download as pdf or txt
Download as pdf or txt
You are on page 1of 3

Problem1: 3 , Delta-Wye Transformer Information: 115/23 kV and current in low voltage side

winding is 376 amps. Answer the following questions.

1. What is the transformer MVA?

2. What is the current in low voltage side winding?

3. What is the line current in high voltage side?

4. What is the transformer ratio?

5. What is the line voltage in the low voltage side of transformer?

Problem 2: Use the drawing below and answer the following questions.

230/23 kV
25 MVA

6. What is the transformer winding configuration?

7. What is the winding current in low side of transformer?

8. What is the voltage across the H1 winding?

9. What is the voltage in X3-X0?

10. What is the voltage in H1-H2?

11. What is the winding current in high side of transformer?

12. What is the line current in low side of transformer?

13. What is the line current in high side of transformer?


14. What is the transformer turn ratio?

Problem 3: Use the drawing below and answer the following questions.

69/7.2 kV
16,670 KVA

15. What is the primary current?

16. What is the secondary current?

17. What is the transformer turn ratio?

18. If three of these transformers are in a bank the bank, what is the bank capacity?

Problem 4: Use the drawing blow and answer the following questions?

H1 H2 H3
69/23 kV
5 MVA

X1 X2 X3

19. What is the transformer winding configuration?

20. What is the winding current in low side of transformer?

21. What is the voltage across the H1 winding?

22. What is the voltage in X3-X2?

23. What is the voltage in H1-H2?

24. What is the winding current in high side of transformer?

25. What is the line current in low side of transformer?

26. What is the transformer turn ratio?


Problem 5: A three-phase WYE-DELTA step-down transformer having turns ratio per
phase of 10 takes 10 A when connected to 3.3 kV supply mains. Determine

27. Primary voltage per phase (winding).

28. Secondary line voltage.

29. Secondary line current.

30. Transformer capacity.

You might also like