www.lane-enterprises.

com
 Lanes Coil Pipe
With the addition of coil pipe, Lane is able to provide the complete product line for all your HDPE drainage
needs. Consistent with Lanes commitment to high quality, coil pipe is produced using first-rate resins that
ensure high strength and a long service life. Available in 4, 6 and 8 diameters, in perforated or non-
perforated patterns, and with a range of fittings, Lanes Coil Pipe offerings can meet all the subsurface
drainage needs of your site, building, roads and pavements.

Product Options: Solid Wall Applications: Perforated Applications:

n 4, 6 and 8 Diameters n Roof Drains n Athletic/Recreational Field Drainage
n Agricultural or DOT Grade n Downspouts n Agricultural Drainage
n Perforated or Solid Wall n Driveway Culverts n Golf Course /Landscape Drainage
n Small Coils or Maxi Coils n Rear Yard Sump Mains n Retaining Wall Drain
n Couplers, Fittings and n Agricultural Mains n Highway Under Drain
Appurtenances n Outlet Drains n Foundation/Basement Drain

Lane Solid Wall and Perforated Wall Coil Pipe INFORMATION

Diameter Small Coil Lengths Maxi Coil Lengths Grades Polyester Knit Filter (Sock)

4 100 & 250 3,000 DOT or Agricultural Available Only For Perforated Wall Pipe
6 100 1,400 DOT or Agricultural Available Only For Perforated Wall Pipe
8 75 *Custom Sizes DOT or Agricultural Available Only For Perforated Wall Pipe
*To the extent practical Lane will try to accommodate specified lengths

Lane Solid Wall and Perforated Wall Coil Pipe Specifications

Inside diameter 4 6 8
Outside diameter 4.75 7.05 9.4
Corrugation pitch 0.7 0.85 1
Corrugations per ft 18 15 12
Weight, lbs/ft 0.31 0.78 1.1
Perforation rows 4 4 8
Perforations per ft 36 32 96
Slot length, in 0.98 0.98 0.98
Slot width, in 0.12 0.12 0.12
Water inlet area, in2/ft *1.00 *1.00 *1.00
*Minimum required

High Quality Construction

As with all Lane HDPE drainage pipe, coil pipe is made with only quality resins that meet or exceed the requirements
established by pertinent DOT, forestry or agricultural agencies. Depending on the specifications defined for your project
Lane is able to supply coil pipe that economically satisfies those standards. Whether coil pipe is made with prime virgin
resins or with a recycled content, Lanes Coil Pipe has the strength and service life needed for your project.

DOT Grade:
n AASHTO M252, Type C Slotted
Perforations, Class 2
n Qualifies for DOT Projects under drain
n Virgin Resin Material

Agricultural Grade:
n ASTM F 405 (4 and 6)
n ASTM F 667 (8)
n Recycled Resin Content ( 50%)
n Qualifies for LEED Credits

2 www.lane-enterprises.com
Fittings
Lanes Coil Pipe is complemented by a complete assortment of fittings to meet various product applications.
Whether coil pipe is being used for downspouts and roof drains or highway under drain, Lane will ensure the
proper fitting for the proper application.

4-inch 2 x 3 Downspout Adapter 4-inch 3 x 4 Downspout Adapter 4-inch Internal Coupler 4-inch Tees
(HDFT04SDSA/C) (HDFT04LDSA/C) (HDCP04IC) (HDFT04T/C)

4-inch Wye 6-inch Blind Tee 4-inch Snap Coupler (HDCP04SC) 6 x 5 x 4-inch Reducer
(HDFT04W/C) (HDFT06BT/C) 6-inch Snap Coupler (HDCP06SC) (HDCP06RSC)

6-inch Internal Coupler 6-inch Reducer Tee 8-inch Blind Reducing Tee (HDFT08BRT/C) 4-inch 90 Elbow
(HDCP06IC) (HDFT06RT/C) 10-inch Blind Reducing Tee (HDFT10BRT/C) (HDFT04EL90/C)
12-inch Blind Reducing Tee (HDFT12BRT/C)

6-inch Reducer Cross Tee 6-inch Reducer Wyes 4-inch Snap End Cap 4-inch Tap Tees for 6 - 8 Connections (HDFT04STT/C)
(HDFT06RCT/C) (HDFT06RW/C) (HDFT04EC/C) 4-inch Tap Tees for 10 - 12 Connections (HDFT04LTT/C)
6-inch Snap End Cap 6-inch Tap Tees for 6 Connections (HDFT06STT/C)
(HDFT06EC/C) 6-inch Tap Tees for 30 - 36 Connections (HDFTLTT/C)
Durable
Lanes Coil Pipe is by nature a tough, durable, chemically inert material that is highly resistant to the kind of
abrasive conditions and corrosive attack that can cause deterioration in other pipe materials. Lanes Coil Pipe is
environmentally friendly and will not deteriorate in conditions
that cause distress in other pipe products.

Easy Installation
Coil lengths available from Lane minimize or eliminate
the need to couple joints. The potential to keep on rolling
for good distances of open trench creates an economy of
installation unmatched by other types of pipe. Along with
a complete range of simply assembled fittings, Lanes Coil
Pipe achieves an easy installation in even the more rigorous
applications.

www.lane-enterprises.com 3
 Lane Enterprises offers a wide variety of quality drainage products
backed by a support staff to handle your technical issues. Continuing improvement
of fabrication methods and close control of materials, enables Lane to maintain
compliance with the most current design, material and fabrication specifications.
Lane will work with you to make certain the product specified for each and every
installation is the best product for that application. Quality products, technical
support and outstanding customer service make Lane your best source for products
for drainage and small bridge applications.

CORRUGATED METAL PIPE ... Steel and aluminum pipe are available in a wide variety
of coatings, corrugations, wall thicknesses and in sizes up to 144. These choices
allow designers to match the best material to the site conditions.

SPIRAL RIB PIPE... The ribs on this pipe project outward, creating a smooth interior
for improved hydraulic performance. This product offers the strength of metal
with hydraulic performance equal to other pipe materials. It is available in sizes
to 120.

STRUCTURAL PLATE...For those sites where fabricated pipe wont be adequate

because of the cover depth or size of the pipe, Lane offers structural plate which
is field assembled by bolting. Lane manufactures both steel and aluminum
structural plate so engineers, developers and contractors have a choice.

SPECIALTY FABRICATIONS... Lanes experienced engineering and fabrication per-

sonnel are able to produce any specialty item you might need. Typical fabrications
include underground stormwater storage systems, stormwater quality products, pond
structures, manholes, equipment housings, trash racks and any other appurtenances
associated with storm sewers, culverts, stormwater treatment or small bridges.

OPEN TOP SLOTTED DRAIN... This pipe is designed specifically to intercept and
convey sheet flow on roadways, loading docks, parking lots, airport surfaces
or factory floors.

WELDED WIRE MESH GABIONS ... Welded wire mesh baskets and mattresses are used
in applications which require earth retention or soil erosion. The finished wall is
aesthetic and cost effective. Welded wire gabions install in half the time of other
gabion products.
The information contained in this brochure is for general use and should not be used without
first securing competent engineering advice as to suitability for any specific application.
THE PUBLICATION OF THIS INFORMATION IS NOT INTENDED AS A REPRESENTATION
OR WARRANTY INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

Lane Enterprises, Inc.

3905 Hartzdale Drive, Suite 514 Camp Hill, PA 17011
717 -761-8175 Toll-Free (866) 864-7419
Fax 717-761-5055
www.lane-enterprises.com

New York North Carolina Pennsylvania Virginia

Ballston Spa (518) 885-4385 Statesville (704) 872-2471 Bedford (814) 623-1191 Bealeton (540) 439-3201
Bath (607) 776-3366 Carlisle (717) 249-8342 Dublin (540) 674-4645
King of Prussia (610) 272-4531 Wytheville (276) 223-1051
Pulaski (724) 652-7747
Shippensburg (717) 532-5959