C330B Series

3-5 and 4-6 Ton

Steel Wheel Compactors

Hydrostatic Drive
Rugged,
Frame
High Strength

No Grease Daily Points

Dual,
Seats
Center Facing
 The C330B Series - Precision-Machine

C330B features full hydrostatic drive with a low- Each drum is standard equipped with a full width Simplified operation through convenient location of
speed, high-torque travel motor cocoa mat and two scraper bars for cleaning in both controls
directions of travel

Applications... he dual center-facing seats of the C330B position the

T operator for visibility, control and comfort. The operator has

full view of the exposed drums and the side of the roller. For
greater versatility and easy transportation, the C330B is
available in a 4-6 ton model equipped with tow package. This design
includes a 12-volt electric socket with rear lights, positive wheel
lock, guide roll yoke locks, tongue lock and safety chains. Mounted
on the frame within easy reach, the hydraulic control valve lowers
the towing wheels while raising the roller to a travel position
providing 7 inches of road clearance under the drums.

Highway Construction
Commercial and
Residential Paving
Driveways
Parking Lots
Asphalt Resurfacing

Achieve Maximum Productivity...

Hydrostatic drive allows smooth, effortless acceleration, The precision machined drum(s) provide smooth, compacted
deceleration and directional changes. surface results.
Radial piston design transmission provides excellent gradeability, Two-section steering drum minimizes scuffing in sharp turns.
as well as top production at high travel speed. Dual scrapers and full width cocoa mats on each drum minimize
Hydrostatic steering with automotive type steering wheel asphalt pick-up.
provides the operator with controlled maneuverability. Hydrodynamic braking of hydrostatic drive system provides
Cummins A2300 diesel engine provides ample reserve power for smooth, controlled, positive stops.
even the most demanding jobs.
ed Drums Provide Smooth, Compacted Surfaces
Standard Equipment (3-5 ton)

Cummins A2300 Diesel Engine

Pressurized Water Spray System

Horn

Front and Rear Drum Scrapers

Cocoa Mats

Vandal Guards

ROPS/FOPS and Seat Belts

The C330B 4-6 ton design with tow package allows All daily maintenance checkpoints and filters are easily
for easy transportation of the compactor reached
Optional Equipment (3-5 ton)

Headlights (Front and Rear)

Turn Signals and 4-way Flashers
Special Paint, 1 Color
(Enamel Only)

Maintenance Standard Equipment (4-6 ton)

Cummins A2300 Diesel Engine

and Safety
The frame overhang is minimal and all drive Simple ergonomic layout of controls makes



Pressurized Water Spray System
Horn
Front and Rear Drum Scrapers
Cocoa Mats
components are inside the frame. operation easy.
Vandal Guards

There are no grease daily fittings. Travel motor brake applies automatically when ROPS/FOPS and Seat Belts
engine is shut down or with a loss of Towing Package
High efficiency, 7-micron filter helps prolong transmission hydraulic pressure.
Towing Lights
hydraulic component life. Indicator light on
console immediately alerts the operator when the The water tank, fuel tank and engine are Towing Safety Chains
filter requires service. positioned down inside the frame keeping a low
center of gravity.
8:25 x 20 - 10 Ply Tires

Daily maintenance checkpoints and filters are

Optional Equipment (4-6 ton)
easily reached. The dual center-facing seats provide the operator
excellent visibility of the drum and water spray Headlights (Front and Rear)
Pressure test ports are centrally located, using
standard capped fittings for quick hassle-free
system during travel in either direction.
Turn Signals and 4-way Flashers
servicing. Falling-Object/Roll-Over Protective Structure Special Paint, 1 Color
(FOPS/ROPS) and seat belts are standard (Enamel Only)
The non-corrosive water spray system features
PVC spray bars and quick-disconnect spray
features.
9:00 x 20 - 12 Ply Tires
nozzles. The transverse engine mounting keeps the Electric Brakes
operator comfortable by directing air, noise and Electric Brakes Control Kit
Center opening hood offers excellent engine area exhaust 90 away.
accessibility.
 52"
206" 1321 mm
5232 mm
48" 1219 mm (DIA.) 34" 864 mm (DIA.)
x 42" 1067 mm x 40" 1016 mm

C330B ADJUSTABLE
63"
1600 mm
97"
2464 mm

Series 26" 660 mm

30" 762 mm
34" 864 mm
70"
1778 mm
104"
2642 mm

15" 108" 7" 621/4"

381 mm 2743 mm 178 mm 1581 mm
159" (Wheels Removed)
4039 mm 84"
2134 mm

Technical Data... HYPAC

C330B
Weights
Operating weight 3-5 ton .................................................................................. lb (kg) 9380 (4255)
Operating weight w/ full ballast 3-5 ton............................................................ lb (kg) 12080 (5480)
Operating weight 4-6 ton .................................................................................. lb (kg) 10347 (4693)
Operating weight w/ full ballast 4-6 ton............................................................ lb (kg) 13047 (5918)
Max. static linear load/drive drum 3-5 ton........................................................ lb/in (kg/cm) 171 (30.5)
Max. static linear load/guide drum 3-5 ton....................................................... lb/in (kg/cm) 122 (21.9)
Max. static linear load/drive drum 4-6 ton........................................................ lb/in (kg/cm) 191 (34.1)
Max. static linear load/guide drum 4-6 ton....................................................... lb/in (kg/cm) 126 (22.5)
* Operating weight includes full fuel tank, half tank waterspray, FOPS/ROPS and 175 lb operator

Dimensions
Track radius, inner ............................................................................................ in (mm) 112.5 (2858)
Height with FOPS/ROPS ................................................................................... in (mm) 97 (2464)

Driving Characteristics
Speed (1) .......................................................................................................... mph (km/h) 0-11 (0-17.7)

Drive
Engine manufacturer......................................................................................... Cummins
Type .................................................................................................................. A2300
Cooling ............................................................................................................. water
Number of cylinders ......................................................................................... 4
Performance SAE, brake................................................................................... hp (kW) 47 (35)
Speed................................................................................................................ rpm (min-1) 2600 (2600)
Fuel ................................................................................................................... diesel
Electric equipment ............................................................................................ V 12
Drive system..................................................................................................... hydrostatic
Driven drum...................................................................................................... R

Brakes
Service brake .................................................................................................... hydrostatic
Secondary/Parking brake.................................................................................. SAHR

Steering
Steering system ................................................................................................ automotive-type
Steering method ............................................................................................... hydraulic
Steering angle +/- ............................................................................................. degrees 39
Oscillating angle straight +/-............................................................................. degrees 25
Oscillating angle full turn +/- ............................................................................ degrees 15

Water Spray System

Type of spray system........................................................................................ pressurized

Capacities
Fuel ................................................................................................................... gal (l) 17 (64)
Water ................................................................................................................ gal (l) 100 (379)
Hydraulic oil reservoir....................................................................................... gal (l) 15 (57)
Coolant system ................................................................................................. gal (l) 4.75 (18)
Technical modifications reserved. Machines may be shown with options.

2000 Kentville Road Kewanee, IL 61443

Tel: 309 853-3571 Fax: 309 852-0350

B110H-923 2M804TTWW www.hypac.com Technical modifications reserved. Machines may be shown with options.