Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 534 views

    Satr H 1003

    Uploaded by

    Thouseef Ma
    1. This document describes the results of a concrete moisture field test conducted to determine if the moisture level of concrete was suitable for coating purposes. 2. The test involved two procedures: attaching a plastic sheet to the concrete surface for 16 hours to check for moisture, and using an Elcometer moisture meter to directly measure the moisture content. 3. The test of the concrete sample failed the initial moisture test but passed when retested, as the moisture content was below the 4% acceptance threshold for coating after additional drying time.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd

    Satr H 1003

    Uploaded by

    Thouseef Ma
    534 views2 pages
    1. This document describes the results of a concrete moisture field test conducted to determine if the moisture level of concrete was suitable for coating purposes. 2. The test involved two procedures: attaching a plastic sheet to the concrete surface for 16 hours to check for moisture, and using an Elcometer moisture meter to directly measure the moisture content. 3. The test of the concrete sample failed the initial moisture test but passed when retested, as the moisture content was below the 4% acceptance threshold for coating after additional drying time.

    Original Description:

    SATR-H-1003

    Original Title

    SATR-H-1003

    Copyright

    © © All Rights Reserved

    Available Formats

    XLS, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    1. This document describes the results of a concrete moisture field test conducted to determine if the moisture level of concrete was suitable for coating purposes. 2. The test involved two procedures: attaching a plastic sheet to the concrete surface for 16 hours to check for moisture, and using an Elcometer moisture meter to directly measure the moisture content. 3. The test of the concrete sample failed the initial moisture test but passed when retested, as the moisture content was below the 4% acceptance threshold for coating after additional drying time.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd
    Download as xls, pdf, or txt
    534 views2 pages

    Satr H 1003

    Uploaded by

    Thouseef Ma
    1. This document describes the results of a concrete moisture field test conducted to determine if the moisture level of concrete was suitable for coating purposes. 2. The test involved two procedures: attaching a plastic sheet to the concrete surface for 16 hours to check for moisture, and using an Elcometer moisture meter to directly measure the moisture content. 3. The test of the concrete sample failed the initial moisture test but passed when retested, as the moisture content was below the 4% acceptance threshold for coating after additional drying time.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd
    Download as xls, pdf, or txt
    of 2

    SAUDI ARAMCO ID/PID - 18-MAY-05 - REV 0 (Standards Cutoff - JUNE 2008) Rev 3 30-Jun-08

    SAUDI ARAMCO TEST REPORT SATR NUMBER DATE APPROVED QR NUMBER

    Concrete Moisture Field Test (For Coating Purposes) SATR-H-1003 1-Nov-09 Civil
    PROJECT TITLE WBS / BI / JO NUMBER CONTRACTOR / SUBCONTRACTOR

    EQUIPMENT ID NUMBER(S) EQUIPMENT DESCRIPTION EQPT CODE SYSTEM ID. PLANT NO.

    LAYOUT DRAWING NUMBER REV. NO. PURCHASE ORDER NUMBER EC / PMCC / MCC NO.

    SCHEDULED TEST DATE & TIME ACTUAL TEST DATE & TIME QUANTITY INSP. MH's SPENT TRAVEL TIME
    SAUDI ARAMCO USE ONLY
    SAUDI ARAMCO TIP NUMBER SAUDI ARAMCO ACTIVITY NUMBER WORK PERMIT REQUIRED?

    SAUDI ARAMCO INSPECTION LEVEL CONTRACTOR INSPECTION LEVEL

    ITEM
    TEST PROCEDURE ACCEPTANCE CRITERIA REFERENCE PASS FAIL N/A RE-TEST DATE
    No.

    Test Procedures shall be in accordance with (SAES-H-003 Sec. 8.1.4) OR

    1- Tape a 4 mil thick (0.1mm), 18"x 18" (450mm x 450mm) of clear plastic sheet to the surface to be coated; tape all around with duct tape.
    2- Sheet shall remain in place for a minimum of 16 hours. Indicate number of hours sheet has been in place:_____ hrs.

    3- Remove and visually check the underside for moisture.


    4- After 16 hours if no moisture is present on the inside of the plastic, the concrete is ready for coating.
    5- If droplets of moisture are present, the concrete shall be given more curing time. Pass Fail N/A

    Alternate Test Procedures shall be in accordance with ( SAES-H-003 Sec. 9.6.9)

    1- Drill 2 holes 6mm Diameter, 25mm deep and 150mm apart (holes to be repaired after test)
    2- Surface contaminants such as laitance and form oils shall be removed.
    3- Insert the Elcometer probes into each hole and seal in place with silicone putty.
    4- Wait 24 hours for the effects of the drilling to stabilize.
    5- Moisture Content Reading: ____________%
    6- Begin coating only if the moisture content reading is less than 4%. Pass Fail N/A

    Repairs during tests:

    Result: Moisture Test Failed Moisture Test Passed

    CONCLUSIONS
    ITEM
    TEST RESULTS ACCEPTANCE CRITERIA REFERENCE PASS FAIL N/A RE-TEST DATE
    No.
    Test results are acceptable and in accordance with Saudi Aramco
    D1 N/A
    Engineering Standards and contractural requirements.

    REMARKS:

    REFERENCE DOCUMENTS:
    1- SAES-H-003 -- Protective Coatings for Industrial Concrete Structures, 12 October 2005

    Contractor / Third-Party Saudi Aramco


    Technician Performing Test* PMT Representative
    Name, Title, Department, Test Performed Successfully and Results are Acceptable: T&I Witnessed QC Record Reviewed Work Verified
    Company, Initials and Name, Initials and Date:
    Date:
    QC Inspector PID Representative
    Witnessed Test Work / Rework May Proceed T&I Witnessed QC Record Reviewed Work Verified
    Name, Initials and Date: Name, Initials and Date:

    Page 1 of 2
    SAUDI ARAMCO ID/PID - 18-MAY-05 - REV 0 (Standards Cutoff - JUNE 2008) Rev 3 30-Jun-08

    SAUDI ARAMCO TEST REPORT SATR NUMBER DATE APPROVED QR NUMBER

    Concrete Moisture Field Test (For Coating Purposes) SATR-H-1003 1-Nov-09 Civil
    PROJECT TITLE WBS / BI / JO NUMBER CONTRACTOR / SUBCONTRACTOR

    EQUIPMENT ID NUMBER(S) EQUIPMENT DESCRIPTION EQPT CODE SYSTEM ID. PLANT NO.

    LAYOUT DRAWING NUMBER REV. NO. PURCHASE ORDER NUMBER EC / PMCC / MCC NO.

    SCHEDULED TEST DATE & TIME ACTUAL TEST DATE & TIME QUANTITY INSP. MH's SPENT TRAVEL TIME
    SAUDI ARAMCO USE ONLY
    SAUDI ARAMCO TIP NUMBER SAUDI ARAMCO ACTIVITY NUMBER WORK PERMIT REQUIRED?

    SAUDI ARAMCO INSPECTION LEVEL CONTRACTOR INSPECTION LEVEL

    ITEM
    TEST PROCEDURE ACCEPTANCE CRITERIA REFERENCE PASS FAIL N/A RE-TEST DATE
    No.
    QC Supervisor Proponent and Others
    Quality Record Approved: T&I Witnessed QC Record Reviewed Work Verified
    Name, Organization,
    Name, Sign and Date:
    Initials and Date:

    *Person Responsible for Implementation of Test and Analysis of Results Y = YES N = NO F = FAILED

    Page 2 of 2

    You might also like