Protection Relays Interview Questions & Answers - Engineering Tutorial
Protection Relays Interview Questions & Answers - Engineering Tutorial
ENGINEERING TUTORIAL
(HTTP://ENGINEERINGTUTORIAL.COM)
SHARE
Adsby Google
AnswersPDF QuestionsAnswers MotorProtection
Negative sequence relay is employed for the protection of generators and motors against unbalanced loading that may arise due to phase to phase faults.
A differential relay operates when the phasor difference of two or more similar electrical quantities exceeds a pre-determined amount.
Why distance protection is preferred as primary protection compared to over current protection for transmission lines?
Distance relay is superior to over current protection for the protection of transmission lines. Some the reasons are faster protection, simpler coordination, simpler
application, permanent settings without need for readjustment, less effect of the amount of generation and fault levels, fault current magnitude, permits the high
line loading.
Biased differential relay is preferred because its operation is not affected by the trouble arising out of the difference in the CTs ratios for high values of external
short circuit currents.
Where Impedance relay, Reactance relay and Mho relays are employed?
The Impedance relay is suitable for the phase faults relaying for the lines of moderate lengths Reactance type relays are employed for the ground faults while Mho
type of relays are best suited for the long transmission lines and particularly where synchronizing power surge may occur.
It is a differential relay where the operating current required to trip can be expressed as a percentage of load current.
http://engineeringtutorial.com/protectionrelaysinterviewquestionsanswers/ 1/3
1/3/2017 ProtectionRelaysInterviewQuestions&AnswersEngineeringTutorial
Relay settings means actual value of the energizing or characteristic quantity at which the relay is designed to operate under given conditions.
Plug Setting Multiplier and is de ned as the ratio of fault current in the relay coil to the pick up value.
Directional relay are used when graded time overload protection is applied to ring mains and interconnected networks.
The instantaneous type attraction armature can be made a de nite time lag or inverse time lag by using a oil dash pot, an air escapement chamber a clock work
mechanism or by placing a fuse in parallel with it.
Related Articles :
Generator Protection Interview Questions & Answers (http://engineeringtutorial.com/synchronous-generator-protection-interview-questions-answers/)
SHARE ON
http://engineeringtutorial.com/protectionrelaysinterviewquestionsanswers/ 2/3
1/3/2017 ProtectionRelaysInterviewQuestions&AnswersEngineeringTutorial
(http://www.facebook.com/sharer.php?
(http://twitter.com/share?
(https://plus.google.com/share?
(http://www.tumblr.com/share/link?
(http://www.linkedin.com/shareArticle?
u=http%3A%2F%2Fengineeringtutorial.com%2Fprotection-
url=http%3A%2F%2Fengineeringtutorial.com%2Fprotection-
url=http%3A%2F%2Fengineeringtutorial.com%2Fprotection-
url=http://http%3A%2F%2Fengineeringtutorial.com%2Fprotection-
mini=true&url=http%3A%2F%2Fengineeringtutorial.com%2Fprotect
relays- relays- relays- relays- relays-
interview-
interview-
interview- interview-
interview-
questions-
questions-
questions- questions-
questions-
answers%2F)
answers%2F&text=Protection%20Relays%20Interview%20Questions%20&%20Answers)
answers%2F) answers%2F&name=Protection%20Relays%20Interview%20Questions%20&%
answers%2F)
(http://engineeringtutorial.com/synchronous-generator-protection-interview-questions-answers/)
PREVIOUS ARTICLE
(http://engineeringtutorial.com/advantages-star-delta-systems/)
NEXT ARTICLE
No comments
Message
Name*...
Email*...
Website...
SEND
CATEGORIES
Categories
Select Category
http://engineeringtutorial.com/protectionrelaysinterviewquestionsanswers/ 3/3