Aqp Flow Fmea
Aqp Flow Fmea
Aqp Flow Fmea
Standards Preparation
Process Flowchart including Control Points
Control Plan including SPC Requirements
Inspection Instruction Sheet
Prototype Build/Verification
Processing Equipment/Verification
Order Production Tooling, Gages, & Test Equipment
Process Potential Studies on Vendor's Floor
Setup & Debug Production & Inspection Equipment
Process Potential Studies for all Major Characs.
Evaluation Activities
Process Review/Production Sign-off
Process Sheets
Gage & Test Equipment
Packaging
Initial Sample & First Production Part Evaluation
SPC Data
http://thequalityportal.com
ADVANCED PRODUCT QUALITY PLANNING
STATUS REPORT
Date:
RISK ASSESMENT
Team Members Company Title / Position Contact Information (tele, fax, mobile, pager, etc.)
CAPABILITY STUDIES Report the Ppk of each KPC on an on-going basis, as the process changes and new lots are manufactured
KPC #
Date
AIAG Status Program Supplier Closed Resp. Remarks or Note Assistance Required
APQP (G/Y/R or Date Date Date Engineer
APQP ELEMENTS Element N/A) Initials
1 Design FMEA
2 Team Feasibility Commitment
3 Preliminary Process Flow and PFMEA
4 Design Review(s)
5 Facilities & Tools
6 Gauging and Test Equipment
7 Prototype Build Control Plan
8 Design, Drawings and Specifications
9 Logistics/EDI Capability
10 Packaging Specifications
11 Manufacturing Process Flow Chart
12 Process FMEA & Control Plan Review
13 Measurement Systems Evaluation
14 Pre-Launch Control Plan GP12
15 Operator Process Instructions
16 Production Trial Run (Capacity Verified)
17 Production Control Plan
18 Production Source Approval
19 Production Part Approval (PPAP)
20 Production Readiness
Additional Comments: