Dual String Completion
Dual String Completion
Dual String Completion
COMPLETION
By EZAZ FAROOQ & AHSAN ALI KHAN
WHAT IS WELL COMPLETION?
TYPES OF COMPLETION
DUAL STRING COMPLETION
TOOLS USED IN DUAL COMPLETION
CONCLUSION
WELL COMPLETION
Equipment installed and procedures performed in oil or gas
wellbores to facilitate flowing fromproductionor pumping
intoinjectionsubsurface formations after drilling, running
steel casing and cementing the primary casing or liner in place.
Reservoir Completion:
Connection between reservoir and the well
Major decisions in the reservoir completion are
-Open hole versus cased hole
-Sand control requirement and type of sand control
-Single or multi-zone (commingled or selective)
Upper Completion
Conduit from reservoir completion to surface facilities
Major decisions in the upper completion are
-Articial lift and type (gas lift, electrical pump, etc.)
-Tubing size
-Single or dual completion
TYPE OF COMPLETIONS
DUAL COMPLETION
Single casing containing two production tubing strings, each in a different reservoir or a different zone of reservoir.
Permanent packer
Retrievable packer
DUAL COMPLETION
Retrievable Dual Packer
Advantages
Production rate from each zone can be independently
control
Changes in production characteristics of one zone will not
affect other zone
Stimulation can be applied to each zone
Disadvantages
Since each zone needs a tubing string and other completion
equipment, additional expenditure and installation time is
needed
The possibility of component failure is increased with the
amount of completion equipment.
Using of two small tubing sizes to fit in production casing
string may reduce total flow capacity of the well
Thankyou!