Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                

AlfaNova 27

Download as pdf or txt
Download as pdf or txt
You are on page 1of 2

AlfaNova 27

Fusion plate heat exchanger

General information
AlfaNova is a completely new type of plate heat exchanger
(PHE), the worlds first PHE made of 100% stainless steel.
It is based on Alfa Lavals new revolutionary technology,
AlfaFusion, the art of joining stainless steel components
together.

AlfaNova heat exchangers are well suited in applications


which put high demand on cleanliness, applications where
ammonia is used or applications where copper or nickel
contamination is not accepted. Its high resistance to cor-
rosion makes it both hygienic and environmental friendly.

It is extremely compact compared to its capacity to


withstand great strains in demanding heat transfer
applications.

Applications
Within Refrigeration:
- Oil cooler
- Condenser
- Evaporator Standard design
- Economizer The plate pack is covered by cover plates. Connections are
- Desuperheater located in the front or rear cover plate. The channel plates are
- Absorption systems corrugated to improve heat transfer design.

Other main applications: Particulars required for quotation


- Domestic hot water heater To enable Alfa Laval's representative to make a specific
- Process cooling quotation, enquiries should be accompanied by the
- Hydraulic oil cooling following particulars:
- Laser cooling
- Hygienic/sanitary application flow rates or heat load required
- Water/water cooling & heating temperature program
physical properties of liquids in question
desired working pressure
Working principles maximum permitted pressure drop
The heating surface consists of thin corrugated metal
plates stacked on top of each other. Channels are formed
between the plates and corner ports are arranged so that
the two media flow through alternate channels, always in
counter-current flow. The media are kept in the unit by a
bonded seal around the edge of the plates. The contact
points of the plates are also bonded to withstand the
pressure of the media handled.
Flow principle of an AlfaNova
plate heat exchanger
CE approval pressure/temperature graph (AlfaNova HP 27) Standard data
Min. working temperature -50C
Max. working temperature see graph

Min. working pressure Vacuum


Max. working pressure see graph

Volume per channel, litres 0.05
Max. flowrate *) 7.5 m/h


*) Water at 5 m/s (connection velocity)


Standard materials
Cover plates Stainless steel
Connections Stainless steel
Plates Stainless steel

AlfaFusion filler Stainless steel

Standard dimensions Standard connections


B21


28.7
33

H21

19
24
22.3

H23
26
30

A = 11 + n x 2.4
Weight kg: 1.5 + n x 0.13 (n = number of plates)
Measurements in mm 11
24

ECR00053EN 0408 Alfa Laval reserves the right to change specifications without prior notification.

How to contact Alfa Laval


Up-to-date Alfa Laval contact
details for all countries are
always available on our website
at www.alfalaval.com.

You might also like