Network enclosures TE 8000

2 Rittal Network enclosures TE 8000

 The whole is more than
the sum of its parts
The same is true of Rittal The System. With this in mind, we have bundled our
innovative enclosure, power distribution, climate control and IT infrastructure
products together into a single system platform. Complemented by our extensive
range of software tools and global service, we create unique added value for trade and
industry: Production plant, test equipment, facility management and data centres.
In accordance with our simple principle, Faster better everywhere, we are able to
combine innovative products and efficient service to optimum effect.

Faster with our Rittal The System. range of modular solutions, which
guarantees fast planning, assembly, conversion and commissioning with its system
compatibility.

Better by being quick to translate market trends into products. In this way, our
innovative strength helps you to secure competitive advantages.

Everywhere thanks to global networking:

13 production facilities with almost 250,000 m2 production space worldwide
58 subsidiaries
Around 90 warehouse facilities with more than 180,000 pallet locations and
over 250,000 m2 storage space worldwide

Rittal Network enclosures TE 8000 3

Network enclosures TE 8000
Efficient and cost-effective

4 Rittal Network enclosures TE 8000

 Rack without disruptive
enclosure frame
Optimum accessibility from all sides
Maximum utilisation of internal space
Lightning-quick assembly

Simple assembly
Quick removal and mounting of doors
and side panels
System roof for cable entry and active
ventilation
System accessories for quick and direct
installation

Variable at all levels

Universal interior installation with depth-
variable attachment
Direct installation on the 19" mounting
frame
Can be dismantled for transporting to
confined locations

Rittal Network enclosures TE 8000 5

Network enclosures TE 8000

System accessories Page 11 IT monitoring Page 26 IT cooling Cat. 34, page 427IT power Page 23

Benefits: Surface finish: Supply includes: Roof plate including concealed

No frame structure Mounting frame: Self-supporting 482.6 mm (19") cut-out for cable entry and
Optimum accessibility Dipcoat-primed mounting frames, front and optional fan
Readily dismantled and there- Enclosure panels: rear, depth-variable 4 levelling feet, M10 (supplied
fore easily installed Powder-coated Glazed door at the front, loose)
including 130 hinge, designer 4 spacers, 20 mm (supplied
Material: Colour:
handle and security lock loose) to raise the roof plate
Sheet steel RAL 7035
3524 E Please observe the product-
Glazed door: Single-pane
Protection category IP to Sheet steel door at the rear, specific scope of supply.
safety glass, 3 mm
IEC60529: including 130 hinge, security
Further technical information:
IP 20 lock 3524 E
Available on the Internet
Base frame with maximum cut-
out (for optional population with
module plates)

Width600 mm
Units U Packs of 11 11 24 24 42 42 Page
Width mm 600 600 600 600 600 600
Height mm 600 600 1200 1200 2000 2000
Depth mm 600 800 600 800 600 800
Distance between prefitted 482.6 mm (19") levels mm 495 495 495 495 495 495
Free mounting space to the 482.6 mm (19") level,
30 / 30 130 / 130 30 / 30 130 / 130 30 / 30 130 / 130
front/rear mm
Max. load capacity (static) per enclosure kg 400 400 400 400 400 400
Model No. 1 pc(s). 7888.390 7888.410 7888.430 7888.440 7888.500 7888.510
Product-specific scope of supply
Side panels, lockable, including security lock 3524 E 2 pc(s).
Accessories
Cat. 34,
Flex-Block corner pieces, 100 mm 4 pc(s). 8100.000 8100.000 8100.000 8100.000 8100.000 8100.000
511
Cat. 34,
Flex-Block trim panels, 100 mm, vented 2 pc(s). 8100.602 8100.602 8100.602 8100.602 8100.602 8100.602
511
Cat. 34,
Flex-Block trim panels, 100 mm, solid 2 pc(s). 8100.600 see page 8100.600 see page 8100.600 see page
511
Side panels
Baying kit 4 pc(s). 7888.640 7888.640 7888.640 7888.640 7888.640 7888.640 11
Brush kit 2 pc(s). 7888.610 7888.610 7888.610 7888.610 7888.610 7888.610 11
Fan mounting plates 1 pc(s). 5502.020 5502.020 5502.020 5502.020 5502.020 5502.020 13
Fan expansion kit 1 pc(s). 7980.000 7980.000 7980.000 7980.000 7980.000 7980.000 13
Complete earthing kit 1 pc(s). 7000.675 7000.675 7000.675 7000.675 7000.675 7000.675 13
Component shelf, static installation 1 pc(s). 7000.620 7000.620 7000.620 7000.620 7000.620 7000.620 17
Component shelf, pull-out 1 pc(s). 7000.625 7000.625 7000.625 7000.625 7000.625 7000.625 18
Slide rails 2 pc(s). 7963.410 7963.410 7963.410 7963.410 7963.410 7963.410 19

6 Rittal Network enclosures TE 8000

 Network enclosures TE 8000
Width800 mm
Units U Packs of 24 42 42 42 Page
Width mm 800 800 800 800
Height mm 1200 2000 2000 2000
Depth mm 800 600 800 800
Distance between prefitted 482.6 mm (19") levels mm 495 495 495 495
Free mounting space to the 482.6 mm (19") level,
130 / 130 30 / 30 130 / 130 130 / 130
front/rear mm
Max. load capacity (static) per enclosure kg 400 400 400 400
Model No. 1 pc(s). 7888.460 7888.520 7888.530 7888.532
Product-specific scope of supply
Side panels, lockable, including security lock 3524 E 2 pc(s).
Baying kit 4 pc(s).
Accessories
Cat. 34,
Flex-Block corner pieces, 100 mm 4 pc(s). 8100.000 8100.000 8100.000 8100.000
511
Cat. 34,
Flex-Block trim panels, 100 mm, vented 2 pc(s). 8100.802 8100.802 8100.802 8100.802
511
Cat. 34,
Flex-Block trim panels, 100 mm, solid 2 pc(s). 8100.800 see page 8100.800 8100.800
511
Side panels 2 pc(s). 7888.652 11
Baying kit 4 pc(s). 7888.640 7888.640 7888.640 11
Brush kit 2 pc(s). 7888.612 7888.612 7888.612 7888.612 11
Fan mounting plates 1 pc(s). 5502.020 5502.020 5502.020 5502.020 13
Fan expansion kit 1 pc(s). 7980.000 7980.000 7980.000 7980.000 13
Complete earthing kit 1 pc(s). 7000.675 7000.675 7000.675 7000.675 13
Component shelf, static installation 1 pc(s). 7000.620 7000.620 7000.620 7000.620 17
Component shelf, pull-out 1 pc(s). 7000.625 7000.625 7000.625 7000.625 18
Slide rails 2 pc(s). 7963.410 7963.410 7963.410 7963.410 19

Expertise from
the Rittal Technology
Library

Rittal Network enclosures TE 8000 7

Network enclosures TE 8000

System accessories Page 11IT monitoring Page 26IT cooling Cat. 34, page 427IT power Page 23

Benefits: Colour: Side panels, lockable, inclu- 4 C rails, for cable clamping in
No frame structure RAL 7035 ding security lock 3524 E the enclosure depth via cable
Optimum accessibility Base frame with maximum clamps (supplied loose)
Protection category IP to
Readily dismantled and there- cut-out (for optional population 10 cable shunting rings
IEC60529:
fore easily installed with module plates) (metal version), 125 x 65 mm
IP 20
Roof plate including concealed (supplied loose)
Material:
Supply includes: cut-out for cable entry and 50 multi-tooth screws M5,
Enclosure: Sheet steel
Self-supporting 482.6 mm (19") optional fan cage nuts M5, conductive
Glazed door: Single-pane
mounting frames, front and 4 levelling feet, M12, including (supplied loose)
safety glass, 3 mm
rear, depth-variable base/plinth adaptor sleeve Brush kit for cable entry in the
Surface finish: Glazed door at the front, (supplied loose) roof (supplied loose)
Mounting frame: including 130 hinge, 4 spacers, 20 mm (supplied
Further technical information:
Dipcoat-primed designer handle and security loose) to raise the roof plate
Available on the Internet
Enclosure panels: lock 3524 E Flex-Block base/plinth
Powder-coated Sheet steel door at the rear, 100mm, vented
including 130 hinge, security Tested frame earthing to
lock 3524 E IEC 60 950, fitted

Pre-configured
Units U Packs of 24 42 Page
Width mm 800 800
Height mm 1200 2000
Height including base/plinth mm 1300 2100
Depth mm 800 800
Distance between prefitted 482.6 mm (19") levels mm 495 495
Free mounting space to the 482.6 mm (19") level,
130 / 130 130 / 130
front/rear mm
Max. load capacity (static) per enclosure kg 400 400
Model No. 1 pc(s). 7888.840 7888.850
Accessories
Baying kit 4 pc(s). 7888.640 7888.640 11
Fan mounting plates 1 pc(s). 5502.020 5502.020 13
Fan expansion kit 1 pc(s). 7980.000 7980.000 13
Component shelf, static installation 1 pc(s). 7000.620 7000.620 17
Component shelf, pull-out 1 pc(s). 7000.625 7000.625 18
Slide rails 2 pc(s). 7963.410 7963.410 19
Socket strips in plastic enclosure 1 pc(s). 7000.630 7000.630 22
Transport castors 4 pc(s). 7000.672 7000.672 11

8 Rittal Network enclosures TE 8000

 Network enclosures TE 8000

System accessories Page 11Power System Module Cat. 34, page 409IT monitoring Page 26Climate control Cat. 34, page 307

Benefits: Colour: Sheet steel door vented Roof plate including concealed
No frame structure RAL 7035 (vented surface area > 67%), cut-out for cable entry and
Optimum accessibility front with designer handle, optional fan
Protection category IP to
Readily dismantled and there- 130 hinge, security lock 4 levelling feet, M10 (supplied
IEC60529:
fore easily installed 3524 E loose)
IP 20
Sheet steel door vented 4 spacers, 20 mm (supplied
Material:
Supply includes: (vented surface area > 67%), loose) to raise the roof plate
Sheet steel
Self-supporting 482.6 mm (19") rear with 130 hinge, security Please observe the product-
Surface finish: mounting frames, front and lock 3524 E specific scope of supply.
Mounting frame: rear, depth-variable Base frame with maximum
Further technical information:
Dipcoat-primed cut-out (for optional population
Available on the Internet
Enclosure panels: with module plates)
Powder-coated

Depth 1000 mm, vented

Units U Packs of 24 42 42 Page
Width mm 600 600 800
Height mm 1200 2000 2000
Depth mm 1000 1000 1000
Distance between prefitted 482.6 mm (19") levels mm 745 745 745
Free mounting space to the 482.6 mm (19") level,
80 / 130 80 / 130 80 / 130
front/rear mm
Max. load capacity (static) per enclosure kg 700 700 700
Model No. 1 pc(s). 7888.875 7888.882 7888.892
Product-specific scope of supply
Side panels, lockable, including security lock 3524 E 2 pc(s).
Baying kit 4 pc(s).
Accessories
Cat. 34,
Flex-Block corner pieces, 100 mm 4 pc(s). 8100.000 8100.000 8100.000
511
Cat. 34,
Flex-Block trim panels, 100 mm, vented 2 pc(s). 8100.602 8100.602 8100.802
511
Cat. 34,
Flex-Block trim panels, 100 mm, solid see page see page see page
511
Baying kit 4 pc(s). 7888.640 11
Side panels 2 pc(s). 7888.653 7888.653 11
Brush kit 2 pc(s). 7888.610 7888.610 7888.612 11
Complete earthing kit 1 pc(s). 7000.675 7000.675 7000.675 13
Component shelf, static installation 1 pc(s). 5501.665 5501.665 5501.665 18
Component shelf, pull-out 1 pc(s). 5501.685 5501.685 5501.685 17
Slide rails, heavy-duty 2 pc(s). 7063.740 7063.740 7063.740 19
Slide rails, depth-variable 2 pc(s). 5501.480 5501.480 5501.480 19
Cable clamp rails, depth-variable 4 pc(s). 7858.162 7858.162 7858.162 16

Rittal Network enclosures TE 8000 9

Distributor racks

System accessories Page 1119" installation Page 21TE 8000 Page 6

Benefits: Colour: Further technical information: B

T
Optimum accessibility from all RAL 7035 Available on the Internet
sides during assembly and ins-
Supply includes:
tallation
Self-supporting mounting
Unrestricted airflow, due to the
frame, with 482.6 mm (19")
open design
mounting level front and rear
Standard cable trays in the roof

H
Roof-plate prepared for
area for larger quantities of
accommodating cable organi-

HE
cables
sers
The distance between attach-
Open base frame with 2 pun-
ment levels is infinitely variable
ched sections with mounting
Material: flanges for individual configura-
19
Sheet steel tion fitted in the width
4 levelling feet, M10 (supplied
Surface finish:
loose)
Powder-coated
Please observe the product-
specific scope of supply.

TE 8000 open
Units U Packs of 42 42 Page
Width (B) mm 600 800
Height (H) mm 2000 2000
Depth (T) mm 1000 1000
Distance between prefitted 482.6 mm (19") levels mm 745 745
Free mounting space to the 482.6 mm (19") level,
80 / 130 80 / 130
front/rear mm
Max. load capacity (static) per enclosure kg 700 700
Model No. 1 pc(s). 7888.940 7888.944
Product-specific scope of supply
Side panels, lockable, including security lock 3524 E 2 pc(s).
Baying kit 4 pc(s).
Accessories
Cable organiser 4 pc(s). 7888.950 7888.950
Component shelf, static installation 1 pc(s). 5501.665 5501.665 18
Component shelf, pull-out 1 pc(s). 5501.685 5501.685 17
Slide rails, heavy-duty 2 pc(s). 7063.740 7063.740 19
Slide rails, depth-variable 2 pc(s). 5501.480 5501.480 19
Cable clamp rails, depth-variable 4 pc(s). 7858.162 7858.162 16
Cable clamp rails 4 pc(s). 7828.062 7828.062 16
C rails 4 pc(s). 7828.060 7828.060 16
Cable route 1 pc(s). 7000.685 7000.685 18
Cable duct 1 pc(s). 5502.105 20
Cable routing bars, 482.6 mm (19") attachment 4 pc(s). 7111.224 7111.224 20
Shunting ring 4 pc(s). 7220.600 20
Cable management panel see page see page 21

10 Rittal Network enclosures TE 8000

 Accessories

Side panels For enclosure For enclosure

Packs of Model No.
height mm depth mm
for TE 8000
Simple assembly with insertion aid at the bottom 2000 800 2 pc(s). 7888.652
and lock at the top. Earthing bolt with contact lug. 2000 1000 2 pc(s). 7888.653
Material:
Sheet steel
Surface finish:
Powder-coated
Colour:
RAL 7035
Protection category IP to IEC60529:
IP 20
Supply includes:
Side panels, lockable, including security lock
3524 E

Baying kit Packs of Model No.

for TE/TE 4 pc(s). 7888.640
For connecting individual enclosures into bayed
suites at the sides. The enclosures are connected
between the base and roof frame.
Benefits:
Baying of TE 8000 to TE 7000 enclosures is sup-
ported
Material:
Sheet steel, spray-finished
Colour:
RAL 7035
Supply includes:
Assembly parts

Transport castors Max.

load capacity (static) Packs of Model No.
for TE per enclosure kg
The castors may be screw-fastened in the corner
areas within the base frame in place of the levelling 300 4 pc(s). 7000.672
feet. Ground clearance: 58 mm, mounting thread
M10 x 20.
Supply includes:
Assembly parts

Brush kit For enclosure width

Packs of Model No.
mm
for TE 8000
To activate cable entry in the roof plate. 600 2 pc(s). 7888.610
800 2 pc(s). 7888.612
Benefits:
For simple top-mounting on the cut-out edge
Material:
Plastic support with brushes

Rittal Network enclosures TE 8000 11

 Accessories

Ergoform-S lock system Design Standard

Colour Packs of Model No.
The unlocked handle folds down forwards, and the RAL 7035 1 pc(s). 2435.000
lock is opened by swivelling.
Material:
Die-cast zinc Accessories:
Surface finish: Lock inserts, see Cat. 34, page 570
Powder-coated Semi-cylinders, see Cat. 34, page 565

Security handle Colour Design Packs of Model No.

with code RAL 7035
Ergoform-S
1 pc(s). 7200.810
Flexible access option with individual 3-digit numeri- handle
cal code, without key, or via the master key func-
tion with additional installation of a 40 or 45 mm
semi-cylinder to DIN 18 252, irrespective of the
Accessories:
numerical code.
Semi-cylinders, see Cat. 34, page 565
Handle adaptor, see Cat. 34, page 549
Lock inserts, see Cat. 34, page 570

CMC III handles Maximum no. of users,

CMC III Processing Unit 2
Compact
Electromechanical handle system for control and
monitoring via a central CMC III control unit Maximum no. of users,
16
CMC III Processing Unit
Max. 5 p. for power supply
Note
with PoE
Lock type Electromagnetic
Design Ergoform-S handle
Primary input voltage 24 V DC
Rated current mA 100
Operating temperature range +5C...+40C
Connection cable (3 m)
with RJ 12 connector
Product-specific scope of Connection cable (2 m)
supply with RJ 12 connectors
Coupling for extension
with RJ12 jacks
Packs of 1 pc(s).
Model No. 7320.700

Also required:
CMC III Processing Units, see page 26
CMC III CAN bus connection cable, see page 27

12 Rittal Network enclosures TE 8000

 Accessories

Fan mounting plates Width mm 340

for TS IT, TE Height mm 54
For active ventilation. The unit may optionally be Depth mm 550
extended with additional fans. Number of fans 2
Applications: Number of fans (max.) 6
For use in the cut-out integrated into the roof Rated operating voltage V 230
plate.
Operating temperature range +5C...+55C
Colour: Packs of 1 pc(s).
RAL 7035
Model No. 5502.020
Supply includes:
Fan unit
2 fans
1 thermostat Accessories:
Open connection cable Fan expansion kit, see page 13
Assembly parts
Note:
Connection via distributor box or country-specific
connector.

Fan expansion kit Width mm 119

Height mm 119
For use as a stand-alone fan, and for upgrading Depth mm 38
various fan units or to supplement the fan mounting Number of fans (max.)
plate.
Air throughput
160 / 180
Supply includes: (unimpeded air flow) m/h
Fan Rated operating voltage
230, 1~, 50/60
Connection cable (0.61 m) V, ~, Hz
Assembly parts Power consumption W 15 / 14
Operating temperature range -10C...+55C
Noise level dB(A) 37 / 37
Packs of 1 pc(s).
Model No. 7980.000

Complete earthing kit Packs of Model No.

for TE 1 pc(s). 7000.675
To DIN EN 60 950/VDE 0805, 4 mm. For sys-
tem-compatible earthing of all enclosure parts on
the enclosure frame according to VDE. The earth
conductors are pre-assembled ready for connec-
tion with connectors and cut to the right length.
Supply includes:
4 earth straps, 300 mm
4 earth straps, 350 mm
Assembly parts

Rittal Network enclosures TE 8000 13

 Accessories

Module plates Design compensating panel

for TE For enclosure

Width mm Depth mm Model No.
The base area of the TE may be varied as required width mm
using the module plates. 450 50 600 7526.750
450 150 600 7526.755
Material:
Sheet steel, zinc-plated 650 50 800 7526.790
650 150 800 7526.795
Supply includes:
Assembly parts
Note:
Please note the following when selecting suitable Design vented
module plates: For enclosure
B1=Enclosure width(B)-150mm/ Width mm Depth mm Model No.
width mm
T1=Enclosure depth(T)-50mm 450 200 600 7526.829
650 200 800 7526.834

Design solid
For enclosure
Width mm Depth mm Model No.
width mm
450 200 600 7526.760
450 550 600 7526.770
450 750 600 7526.780
650 200 800 7526.800
650 550 800 7526.785
650 750 800 7526.820

Design with brush strip

For enclosure
Width mm Depth mm Model No.
width mm
450 200 600 7526.850
650 200 800 7526.860

T B

B1
T1

14 Rittal Network enclosures TE 8000

 Accessories

TS punched section with Material:

Sheet steel
mounting flange, 17 x 73 mm
For flexible interior installation designs, and/or to Surface finish:
Zinc-plated
accommodate additional built-in components.
The punched sections with mounting flanges may Supply includes:
be located directly on a 482.6 mm (19") mounting 4 punched sections with mounting flanges
frame horizontally at the rear or in the enclosure Assembly parts
depth between two mounting frames. An additional
screw fastening secures the unit. Note:
When selecting a distance between levels outside
If the rail is to be attached between two mounting
of the mounting attachment points, it is advisable
frames, it is necessary to secure the two 482.6 mm
(19") mounting frames at the corresponding dis- to use the depth-variable punched section with
mounting flange; see page 15
tance from one another beforehand.
For simplified setting of this desired 19" distance
between levels, the enclosure frame of the TE 8000
has mounting attachment points on a 50 mm hole
pattern.

In the
Type of attachment In the enclosure depth
enclosure width
Distance between
445 4951) 545 595 645 695
482.6 mm (19") levels mm
Model No. 8612.060 8612.140 8612.040 8612.150 8612.050 8612.160 8612.060
1) To directly fit enclosures in their delivered state

TS punched section with Length

Packs of Model No.
mm
mounting flange, 17 x 73 mm 530 700 2 pc(s). 7000.678
depth-variable
For flexible interior installation designs, and/or to
accommodate additional built-in components. Material:
The punched sections with mounting flanges may Sheet steel
be located in the enclosure depth between two
mounting frames. An additional screw fastening Surface finish:
secures the unit. Zinc-plated
The depth variability of the rails facilitates flexible Supply includes:
adaptation to the existing attachment distance Assembly parts
between the two 482.6 mm (19") mounting frames.
An additional punched section centre piece may be
slid along the rail in the depth and secured to slots.

Rittal Network enclosures TE 8000 15

 Accessories

Cable clamp rails Material:

Sheet steel
For strain relief of the routed cables. The cables may
be attached to the cable clamp rails with cable ties Supply includes:
or nylon loops. The cable clamp rails may be 4 cable clamp rails
installed horizontally at the rear directly onto a Mounting accessories
482.6 mm (19") mounting frame or in the enclosure
depth between two 482.6 mm (19") mounting Accessories:
frames.
The depth-variable version of the rails facilitates Cable ties, see page 20
flexible adaptation of their length to the prescribed Nylon loop, see page 20
attachment distance between the two 482.6 mm
(19") mounting frames.

Type of attachment In the enclosure width In the enclosure depth

Distance between
325 5751) 500 895
482.6 mm (19") levels mm
Model No. 7828.062 7858.160 7858.162
1) To directly fit enclosures in their delivered state

C rails Material:
Sheet steel
To accommodate large tensile forces, larger cables
or cable strands via cable clamps, and for orderly Surface finish:
cable routing inside the enclosures. Zinc-plated
The cable clamp rails may be attached horizontally Supply includes:
at the rear directly onto a 482.6 mm (19") mounting 4 C rails
frame or in the enclosure depth between two Assembly parts
mounting frames.
If the rail is to be attached between two mounting
frames, it is necessary to secure the two 482.6 mm Accessories:
(19") mounting frames at the corresponding Cable clamps, see page 20
distance from one another beforehand.

Cable routing within the 19" mounting frame

Type of attachment In the enclosure width In the enclosure depth
Distance between
445/4951) 545/595 645/695
482.6 mm (19") levels mm
Model No. 7828.060 7828.040 7828.050 7828.060
1) To directly fit enclosures in their delivered state

Cable routing at the side, outside the 19" mounting frame (for 800 mm enclosure width only)
Type of attachment In the enclosure depth
Distance between
4951) 595 695
482.6 mm (19") levels mm
Model No. 4943.000 4944.000 4945.000
1) To directly fit enclosures in their delivered state

16 Rittal Network enclosures TE 8000

 Accessories

Component shelf, Width mm 511

static installation Height mm 22
for TE Depth mm 413
The component shelf is attached directly at the side Distance between levels mm 495
to the front and rear 482.6 mm (19") mounting Load capacity (static) 30 kg surface load, static
frames for TE. Packs of 1 pc(s).
Material: Model No. 7000.620
Sheet steel
Colour:
RAL 7035
Supply includes:
Assembly parts
Note:
Not suitable for combination with telescopic
slides.

Component shelf, pull-out

482.6 mm (19") for TS IT, TE
For mounting between two 482.6 mm (19) mount-
ing levels, on 482.6 mm (19) mounting angles or
482.6 mm (19) mounting frames.
Applications:
Depth-variable to adapt to individual distances
between levels
Benefits:
Tool-free, time-saving one-man assembly from
the enclosure front
Self-locking
Fully extendible
Material:
Sheet steel
Surface finish:
Base: Spray-finished
Telescopic slides/installation kit: Zinc-plated
Colour:
RAL9005
Supply includes:
Component shelf, slotted
Telescopic slide with mounting kit
Assembly parts

Distance between Load capacity

Width mm Depth mm Height U Packs of Model No.
levels mm (static)
419 500 400 - 600 100 kg 1.5 1 pc(s). 5501.715
419 700 600 - 900 100 kg 1.5 1 pc(s). 5501.725
419 500 400 - 600 50 kg 1 1 pc(s). 5501.675
419 700 600 - 900 50 kg 1 1 pc(s). 5501.685

Rittal Network enclosures TE 8000 17

 Accessories

Component shelf, Distance Load

between capacity Height U Packs of Model No.
static installation levels mm (static)
for 482.6 mm (19") system punchings, 400 - 600 100 kg 1 1 pc(s). 5501.695
depth-variable for TS IT, TE 600 - 900 100 kg 1 1 pc(s). 5501.705
Applications: 400 - 600 50 kg 0.5 1 pc(s). 5501.655
Depth-variable to adapt to individual distances 600 - 900 50 kg 0.5 1 pc(s). 5501.665
between levels
Benefits:
Tool-free, time-saving one-man assembly
Installation options:
482.6 mm (19") L mounting angles, front and rear
482.6 mm (19") mounting frames front and rear
Material:
Sheet steel
Surface finish:
Spray-finished
Colour:
RAL9005
Supply includes:
Assembly parts

Component shelf, Width mm 482.6

complete set, pull-out Depth mm 500
482.6 mm (19") system punchings Distance between levels mm 395 - 645
The complete set contains a vented component Load capacity (static) 50 kg area load
shelf, telescopic slides and a mounting kit for direct Packs of 1 pc(s).
attachment. The mounting kit also offers depth-vari- Model No. 7000.625
able attachment within 395 645 mm on a 25 mm
pitch pattern.
Installation options:
482.6 mm (19") L mounting angles, front and rear
482.6 mm (19") mounting frames front and rear
Material:
Base: Sheet steel
Surface finish:
Base: Spray-finished
Mounting kit/telescopic slides: Zinc-plated
Colour:
RAL 7035
Supply includes:
1 component shelf, telescopic slides, mounting
kit

Cable route Width mm Height mm Packs of Model No.

for TE 100 1700 1 pc(s). 7000.685
For vertical cable entry at the side of the 482.6 mm
(19) mounting frame for TE, independently from the
enclosure frame.
Material:
Sheet steel
Surface finish:
Zinc-plated
Supply includes:
Assembly parts

18 Rittal Network enclosures TE 8000

 Accessories

Slide rails, depth-variable Distance between Load

482.6 mm (19") capacity Packs of Model No.
for TS IT, TE levels mm (static)
Applications: 400 - 600 80 kg 2 pc(s). 5501.460
For mounting between the front and the rear pair 600 - 900 150 kg 2 pc(s). 5501.480
of mounting angles.
To support heavy installed equipment.
To adapt to individual distances between
482.6 mm (19") levels
Benefits:
Tool-free, time-saving one-man assembly from
the enclosure front
All three mounting holes in the EIA system punch-
ings are available for screw-fastening the equip-
ment.
Alternatively, direct screw fastening to the
482.6 mm (19") system punchings is also possi-
ble
Installation options:
482.6 mm (19") L mounting angles, front and rear
482.6 mm (19") mounting frames front and rear
Material:
Sheet steel
Surface finish:
Zinc-plated
Supply includes:
Assembly parts
Note:
Effective contact surface 25 mm per side

Slide rails, heavy-duty Distance

Contact Contact
between
for TS IT, TE 482.6 mm
surface, surface,
Packs of Model No.
With L-shaped mounting angles or TE mounting width depth
(19") levels
frame and a clearance between levels of 740 mm. mm mm
mm
Easily and quickly installed due to locating brackets 745 50 734 2 pc(s). 7063.740
for the rear level.
Material:
Sheet steel
Surface finish:
Zinc-plated
Load capacity:
100 kg area load
Supply includes:
Assembly parts

Slide rails Distance

Contact Contact
between
for TS IT, TE 482.6 mm
surface, surface,
Packs of Model No.
For mounting between the front and rear 482.6 mm width depth
(19") levels
(19") mounting levels. The slide rails can be used to mm mm
mm
support heavy 482.6 mm (19") components. 395 85 324 2 pc(s). 7963.310
Material: 495 85 424 2 pc(s). 7963.410
Sheet steel 595 85 524 2 pc(s). 7963.510
Surface finish: 695 85 624 2 pc(s). 7963.610
Zinc-plated 795 85 724 2 pc(s). 7963.710
Load capacity:
80 kg, static load
Supply includes:
Assembly parts

Rittal Network enclosures TE 8000 19

 Accessories

Cable management
Cat. 34,
Packs of Model No.
page
6 14 mm 7077.000
12 18 mm 7078.000
18 22 mm 7097.000
1 2
22 26 mm 7097.220
26 30 mm 7097.260
 Cable clamps for cable diameter
30 34 mm
25 pc(s).
7097.300
666

34 38 mm 7097.340
38 42 mm 7098.000
42 56 mm 7097.100
56 64 mm 7099.000

3 4
 Cable ties 100 pc(s). 2597.000 667

20 x 130 mm 10 pc(s). 7072.220

 Nylon loop fastening 20 x 200 mm 10 pc(s). 7072.230 667

20 x 300 mm 10 pc(s). 7072.240

 Nylon loop strap 16 x 5000 mm 1 pc(s). 2203.400 667

125 x 85 mm 10 pc(s). 7111.900

 Cable shunting ring 125 x 65 mm 10 pc(s). 7111.000 670

6 85 x 43 mm 10 pc(s). 7112.000

Shunting ring 330 x 90/70 mm 4 pc(s). 7220.600 670

4U 4 pc(s). 7111.224
Cable routing bars for attachment to the
7
482.6 mm (19") system punchings
673

1U 10 pc(s). 7111.214

4U 4 pc(s). 7111.222

 Cable routing bars for all-round attachment 673

1U 10 pc(s). 7111.212

 Cable duct, RAL 9005, for enclosure W x H 800 x 2000 mm 1 pc(s). 5502.105 673

20 Rittal Network enclosures TE 8000

 Accessories

482.6 mm (19") installation system

Cat. 34,
Packs of Model No.
page
1U 7151.035
1.5 U 7157.035
 Blanking panel, sheet steel, RAL 7035 2U 2 pc(s). 7152.035 696
1
3U 7153.035
6U 7156.035

3U
 Blanking panel, tool-free attachment, RAL 9005
(3 x 1 U)
3 pc(s). 7151.305

1U 1 pc(s). 5502.255 2 3
 Cable entry panel, sheet steel, RAL 9005 677

2U 1 pc(s). 5502.265

 Drawer to accommodate surplus cables, RAL 7035 1U 1 pc(s). 7063.200 674

4
Cable management panel with steel rings,
1U 1 pc(s). 7257.200
ring 43 x 55 mm, RAL 7035
Cable management panel with steel rings,
 ring 43 x 105 mm, RAL 7035
1U 1 pc(s). 7257.035 674

Cable management panel with steel rings,

2U 1 pc(s). 7257.100
ring 85 x 125 mm, RAL 7035

Cable management panel, RAL 7035 2U 1 pc(s). 7158.035 675

5 6

Cable management panel with cable routing bars,

RAL 7035
1U 1 pc(s). 7257.050 675

 Cable routing channel panel, RAL 7035 1U 1 pc(s). 7149.135 675 7 8

 Panel for cable routing, RAL 7035 2U 1 pc(s). 7269.135 676

9 10

 Cable tray, RAL 7035 2U 1 pc(s). 7269.235 676

 Cable management duct, horizontal, RAL 7035 2U 1 pc(s). 7158.100 676

11 12

 Adhesive measurement strips 1 56 U 1 pc(s). 7950.100 686

Rittal Network enclosures TE 8000 21

 Accessories

482.6 mm (19") assembly components

Cat. 34,
Packs of Model No.
page
Captive nuts M5, with contact 50 pc(s). 2094.500
Captive nuts M5, without contact 50 pc(s). 2092.500
 Captive nuts M6, with contact 50 pc(s). 2094.200
694
1 2
Captive nuts M6, without contact 50 pc(s). 2092.200

Multi-tooth screws M5 x 16 mm 50 pc(s). 7094.130

 694

Multi-tooth screws M6 x 16 mm 50 pc(s). 7094.140

System lights
Cat. 34,
Packs of Model No.
page

Light, 1 U
1
 Fluorescent tube 8 watts, 230 V, 50 Hz, 1 pc(s). 7109.200 637
with 2.5 m connection cable and earthing-pin connector

Compact light
 Fluorescent lamp T5, 8 watts, 230 V, 50 Hz, 1 pc(s). 4140.010 636
with 3 m connection cable (open ended)

 Mounting kit magnet for compact light 2 pc(s). 4140.000 636

Door-operated switch for compact light

 with connection cable 600 mm
1 pc(s). 4315.710 639

4 Mounting kit for door-operated switch in TE 8000 1 pc(s). 7888.615

 Socket strip, 8 sockets, earthing pin 1 pc(s). 7000.630 423

Further system lights may be found in Catalogue 34, from page 634

22 Rittal Network enclosures TE 8000

 Accessories

Socket strips Technical specifications:

Earthing-pin socket strips:
in an aluminium duct Connector type F (CEE 7/4)
The socket strips in the aluminium duct are avail- Rated operating voltage: 250 V
able in various lengths with different functional Connection cable: 2 m long H05VV-F3G1.5
elements. Special attention has been devoted to without connector,  with connector
practical, universal fastening:
Variable attachment facilities have been created with Belgium/France (B/F) socket strips:
Connector type E (CEE 7/5) 1
an angle bracket which may be inserted in four posi-
tions. Hence, for example, the 482 mm long socket Rated operating voltage: 250 V
strip may optionally be mounted on 482.6 mm (19") Connection cable: 2 m long H05VV-F3G1.5
mounting angles, the 482.6 mm (19") mounting with wire end ferrules
frame, on the enclosure frame, or in the rear section Equipment connector strips (IEC 60 320-1/C13)
of the wall-mounted distributor. Without additional socket strips:
mounting accessories, the socket strip may be Rated operating voltage: 250 V
inserted into all sections with a 25 mm hole pattern. Connector input: C14 or cable H05VV-F3G1.0,
This makes selection much easier, as well as pro- depending on the version
viding additional flexibility and saving on warehous-
ing. Provision has also been made for cable routing Material:
of the infeed, and when mounting in the 482.6 mm Aluminium section: Natural anodised 2
(19") section there is adequate space to route the Socket inserts: Polycarbonate
infeed between the socket strip and the profile rail Supply includes:
without kinks. Socket strip
The arrangement of the IEC 320 sockets at a 45 Two mounting brackets
angle allows unrestricted use of angular connectors. Assembly parts
Standards:
Earthing-pin socket: DIN 49 440
IEC 320 socket: EN 60 320-2-2
Overvoltage protection: DIN EN 61 643-11
(VDE 0675 Part 6-11) 3
Approvals:
CE
RoHS
T2
T1 Note:
Depending on the application, we recommend
44

use of a charging current reserve to prevent

44 31
.75
incorrect activation due to starting-current spikes
Technical details:
Available on the Internet
4

Earthing-pin connector type

Attachment
Mounting
Rated Wall- Length
Con- No. of 482.6 mm dimen-
Version current mounted (T1) Model No.
nection sockets Frame (19") sion (T2)
A distributor, mm
level mm1)
horizontal
3 262.6 232.5 7240.110
 Without rocker switch 16 Cable 7 482.6 452.5 7240.210
12 658.6 628.5 7240.310
5
3 306.6 276.5 7240.120
 With rocker switch 16 Cable
7 482.6 452.5 7240.220
 Overvoltage protection, 5 482.6 452.5 7240.230
type 3 and interference 16 Cable
suppressor filter 9 658.6 628.5 7240.330
 Circuit-breaker, type B, 16 Cable 5 482.6 452.5 7240.240
16 A, 2-pole
 UPS strip, connection
cable with 10 A IEC 320
10 C14 7 482.6 452.5 7240.260
connector, type E,
with G fuse, 10 A
6
FI switch, 0.03 A, 2-pole, 16 Cable 5 482.6 452.5 7240.280
type A
B/F sockets, type E with
16 Cable 7 482.6 452.5 7240.510
earthing pin (Belgium/France)
1) Variable attachment distance within a range of 25 mm, the distance given is hole centre hole centre of mounting bracket

C13 connector type

Attachment
Mounting
Rated Wall- Length
Con- No. of dimen-
Version current mounted 482.6 mm (T1) Model No.
nection sockets Frame sion (T2)
A distributor, (19") level mm
mm1)
horizontal
For IEC 320 connectors 16 Cable 12 482.6 452.5 7240.200
For IEC 320 connectors
10 C14 9 482.6 452.5 7240.201
with IEC 320 input
1) Variable attachment distance within a range of 25 mm, the distance given is hole centre hole centre of mounting bracket

Rittal Network enclosures TE 8000 23

 Accessories

Power distribution unit PDU switched

Measurement function per phase and individually
for enclosure width 800 mm switchable output slots
Benefits: PDU managed
With the compact PDU, any IT rack may be High-end IT rack, power distribution with energy
easily equipped with a professional power distri- measurement and monitoring functions for each
bution system individual output slot
With the TS IT rack, assembly is even tool-free
Compact design Material:
Easy to assemble Extruded aluminium section, black
Power-saving design, minimal inherent con- Protection category IP to IEC 60 529:
sumption by the PDU itself, thanks to the use of IP 20
bistable relays and OLED display with power-
saving function Standards:
Integral web server for direct network EN 60 950
connection with extensive user administration EN 61 000-4
(not PDU basic/slave PDU) EN 61 000-6
Redundant power supply from all 3 phases and EN 55 022
additionally via an existing PoE (Power over Low Voltage Directive:
Ethernet) network 2014/35/EU
Extensive range of management and monitoring
functions EMC Directive:
High-MTBF and measurement accuracy of 2014/30/EU
+/- 1%
CAN bus for connecting slave PDUs Also required:
(not PDU basic)
Ambient monitoring with up to 4 CMC III sensors Mounting adaptor for PDU in TE 7000.688
(temperature, humidity, access, vandalism)
PDU design variants: Photo shows a configuration example with equip-
PDU basic ment not included in the scope of supply
Robust, compact basic power distributor for the
IT environment
PDU metered
Energy measurement per phase, i.e. output require-
ment of an entire IT rack

PDU international, basic version

Power Pin pattern Dimensions
Minimum
Phase Model No.
No. of Output Outputs Outputs PDU length enclosure
current Input
phases kW C13 C19 mm height
A
mm
1 16 3.6 CEE 24 4 970 1200 7955.110
1 32 7.2 CEE 24 4 1115 1800 7955.111
3 16 11 CEE 18 3 845 1200 7955.131
3 16 11 CEE 24 6 1145 1800 7955.132
3 32 22 CEE 24 6 1365 1800 7955.133
3 16 11 CEE 42 1405 1800 7955.135

PDU international, metered version

Power Pin pattern Dimensions
Minimum
Phase Model No.
No. of Output Outputs Outputs PDU length enclosure
current Input
phases kW C13 C19 mm height
A
mm
1 16 3.6 C20 12 710 1200 7955.201
1 16 3.6 CEE 24 4 1225 1800 7955.210
1 32 7.2 CEE 24 4 1370 1800 7955.211
3 16 11 CEE 18 3 1100 1200 7955.231
3 16 11 CEE 24 6 1395 1800 7955.232
3 32 22 CEE 24 6 1620 2000 7955.233
3 16 11 CEE 42 1665 2000 7955.235

24 Rittal Network enclosures TE 8000

 Accessories

PDU international, switched version

Power Pin pattern Dimensions
Minimum
Phase Model No.
No. of Output Outputs Outputs PDU length enclosure
current Input
phases kW C13 C19 mm height
A
mm
1 16 3.6 C20 12 775 1200 7955.301
1 16 3.6 CEE 24 4 1360 1800 7955.310
1 32 7.2 CEE 24 4 1400 1800 7955.311
3 16 11 CEE 18 3 1180 1800 7955.331
3 16 11 CEE 24 6 1480 1800 7955.332
3 32 22 CEE 24 6 1685 2000 7955.333

PDU international, managed version

Power Pin pattern Dimensions
Minimum
Phase Model No.
No. of Output Outputs Outputs PDU length enclosure
current Input
phases kW C13 C19 mm height
A
mm
1 16 3.6 C20 12 775 1200 7955.401
1 16 3.6 CEE 24 4 1360 1800 7955.410
1 32 7.2 CEE 24 4 1400 1800 7955.411
3 16 11 CEE 18 3 1180 1800 7955.431
3 16 11 CEE 24 6 1480 1800 7955.432
3 32 22 CEE 24 6 1685 2000 7955.433

PDU accessories
Cat. 34,
Packs of Model No.
page
Mounting adaptor for PDU in TE 2 pc(s). 7000.688
Covers for C13 jack, lockable 10 pc(s). 7955.010
Covers for C19 jack, lockable 10 pc(s). 7955.015
Connector, universal lock for C14/C20 connector 20 pc(s). 7955.020
Connection cable D/C19, 1.8 m 1 pc(s). 7200.216 457
Connection cable C19/C20, 1.8 m 1 pc(s). 7200.217 457

Rittal Network enclosures TE 8000 25

 CMC III Processing Unit Compact

CMC III Material:

Plastic
Processing Unit Compact
Computer Multi Control (CMC) is an alarm system Surface finish:
Front: Smooth
for network and server enclosures, standard enclo-
Housing: Textured
sures, containers and rooms.
It monitors temperatures, humidity, access, Colour:
smoke, energy and many other physical ambient Front: RAL 9005
parameters Housing: RAL 7035
The system is modular in nature and can be
Protection category IP to IEC 60 529:
flexibly adapted to meet specific monitoring
IP 30
requirements
User benefits plus exceptional savings are Supply includes:
achieved thanks to monitoring via the network Basic system
and the automation of security processes Quick-start instructions
Redundant voltage supply, plus Power over 4 mounting feet
Ethernet (PoE)
Approvals:
Simple wiring with CAN bus connection system
(RJ 45) cULus
Connection to control room systems via OPC UA
More information can be found on the
Rittal website.

W x H x D mm 138 x 40 (1 U) x 120 + 12 (front assembly)

Operating temperature range 0C+45C
Operating humidity range 5 95% relative humidity, non-condensing
Sensors/CAN bus connection units max. 4
Max. overall cable length for CAN bus 1 x 50 m
Model No. 7030.010
Network interface (RJ 45) Ethernet to IEEE 802.3 via 10/100BaseT with PoE
Front USB interface Mini USB for system setting
Interfaces Rear serial RS232 (RJ 12) 1 x for connecting Display Unit, GSM Unit, or ISDN Unit
1 x for max. 4 sensors
CAN bus (RJ 45)
(quantity restriction, see Cat. 34, page 453)
Digital inputs (terminal) 2
Inputs and outputs
Relay output (terminal) Changeover contact max. 24 V (DC), 1 A
Push-button 1 x acknowledgement button
Concealed reset button 1 x service button
Operation/signals Piezo signal generator 1
LED display 1 x multi-colour OK/warning/alarm
Rear LED 1 x for the network status
TCP/IPv4, TCP/IPv6, SNMPv1, SNMPv2c, SNMPv3,
Protocols Ethernet Telnet, SSH, FTP, SFTP, HTTP, HTTPS, NTP, DHCP, DNS,
SMTP, Syslog, LDAP, Radius, OPC-UA, Modbus/TCP
Input 24 V DC (jack) 1 x for connecting CMC III power pack
Redundant 1 x for direct connection or for
Input 24 V DC (terminals)
power supply connecting CMC III power pack
Power over Ethernet PoE 1 x 15.4 W
Real-time clock, energy-buffered (24 h)
Time function
without battery/accumulator, with NTP
Functions User administration LDAP, Radius
User interface Integral WEB server
Control room connection Integral OPC-UA and Modbus/TCP server
Temperature sensor NTC sensor with cable, supplied loose
Integral sensors
Access sensor Infrared technology in the enclosure front

26 Rittal Network enclosures TE 8000

 CMC III Processing Unit Compact

CMC III accessories, application example

Model No.
CMC III Processing Unit Compact
 7030.010
(with front infrared access sensor, temperature sensor, 2/1 inputs/outputs)
 7030.060 Power pack 100 240 V AC to 24 V DC

 7200.215 Connection cable C13/C14

 7030.070 Mounting unit, 1 U

 7030.087 Cable clamp strap

7030.080 Programming cable USB

7030.090 CAN bus connection cable 0.5 m

 7030.091 CAN bus connection cable 1 m

 7030.093 CAN bus connection cable 2 m

 7030.111 Temperature/humidity sensor

 7030.120 Access sensor for rear door

 7030.130 Vandalism sensor

Schematic diagram of an application

9
3

1
10 7
6

2
11

12

4 5

Rittal Network enclosures TE 8000 27

 Enclosures
Power Distribution
Climate Control
IT Infrastructure
Software & Services

XWW00050EN1511

You can find the contact details of all

Rittal companies throughout the world here.

www.rittal.com/contact