National PDF
National PDF
2001
Electrical Engineering Technology - National Diploma
(ND)
National Board for Technical Education
Curriculum and Course Specifications - 2001
PLOT B, BIDA ROAD, P.M.B. 2239 KADUNA - NIGERIA
NATIONAL DIPLOMA (ND) IN ELECTRICAL ENGINEERING TECHNOLOGY
1
Table of contents
GENERAL INFORMATION............................................................................................................................. 4
CURRICULUM TABLE ................................................................................................................................... 9
GENERAL STUDIES COURSES.................................................................................................................. 11
Use of English .......................................................................................................................................... 11
Communication Skills I ............................................................................................................................. 14
Communication Skills II ............................................................................................................................ 16
Report Writing .......................................................................................................................................... 18
Citizen Education...................................................................................................................................... 22
MATHEMATICS COURSES ......................................................................................................................... 25
Algebra and Elementary Trigonometry ..................................................................................................... 25
Calculus.................................................................................................................................................... 32
Logic and Linear Algebra.......................................................................................................................... 36
Trigonometry and Analytical Geometry..................................................................................................... 41
BUSINESS COURSES ................................................................................................................................. 45
Entrepreneurship Development I .............................................................................................................. 45
COMPUTER COURSES............................................................................................................................... 49
Introduction to Computer Software ........................................................................................................... 49
Introduction to Computer Hardware I........................................................................................................ 55
Computer Hardware II .............................................................................................................................. 57
MECHANICAL ENGINEERING COURSES.................................................................................................. 59
Basic Workshop Technology and Practice................................................................................................ 59
Machine tools Technology and Practice ................................................................................................... 71
DRAWING COURSES.................................................................................................................................. 78
Technical Drawing .................................................................................................................................... 78
Electrical Graphics.................................................................................................................................... 84
Electrical Installation of Building ............................................................................................................... 86
MEASUREMENT/INSTRUMENT COURSES ............................................................................................... 91
Electrical/Electronics Instrumentation I ..................................................................................................... 91
Electrical/Electronics Instrumentation II .................................................................................................... 96
ELECTRICAL ENGINEERING COURSES ................................................................................................. 100
Electric Power I....................................................................................................................................... 100
Electric Power II...................................................................................................................................... 103
Electric Power III..................................................................................................................................... 106
Electric Machines I ................................................................................................................................. 112
Electric Machines II ................................................................................................................................ 116
Electrical Engineering Science I ............................................................................................................. 120
Electrical Engineering Science II ............................................................................................................ 125
Electric Circuit Theory I .......................................................................................................................... 129
Electric Circuit Theory II.......................................................................................................................... 132
2
ELECTRONIC/TELECOMMUNICATION COURSES ................................................................................. 135
Electronics I............................................................................................................................................ 135
Electronics II........................................................................................................................................... 139
Electronics III.......................................................................................................................................... 142
Telecommunication Engineering I........................................................................................................... 145
Telecommunication Engineering II.......................................................................................................... 148
PROJECT................................................................................................................................................... 152
Project .................................................................................................................................................... 152
LIST OF MINIMUM RESOURCES.............................................................................................................. 155
LIST OF BOOKS (ND) ................................................................................................................................ 163
GUIDELINES FOR TEXT BOOK WRITERS............................................................................................... 165
LIST OF PARTICIPANTS ........................................................................................................................... 166
3
GENERAL INFORMATION
GOAL AND OBJECTIVES
The programme is designed to produce electrical engineering technicians for the following industries;
manufacturing, assembling, servicing, power generation, transmission distribution and utilisation,
telecommunications and other related industries. More specifically, diplomates of the programme should be
able to:
1) Construct simple electrical and electronic circuits when necessary for use in modification
or as a part of a system;
2) Assemble, install and test-run simple electrical and electronic equipment;
3) Carry out both preventive and corrective maintenance on simple electronic/electrical
installation, equipment and appliances;
4) Select and use appropriate instruments to carry out simple tests and measurement on all
types of electrical and electronic installation and equipment under various operating
conditions.
5) Operate relevant equipment and installations whenever required;
6) Prepare simple bills of quantities and specifications related to electrical/electronic
engineering works;
7) Coordinate and supervise craftsmen in activities related to electrical/electronic
engineering services
8) Maintain a personal logbook to record his daily and weekly activities for each semester.
The entry requirements for National Diploma in Electrical Engineering Technology are:
1. Four credit level passes at senior school certificate examination (SSCE) or its equivalent
at not more than TWO sittings. The four subjects must include Mathematics, Physics and
any TWO other science subjects. At least a pass in English Language is required.
2. The National Technician Certificate (NTC) in electrical trade with credit passes in
Mathematics, Physics and ONE other subject. Also a pass in English Language is
mandatory.
3. Four credit passes in an NBTE recognised preliminary ND course offered in a
polytechnics or similar post secondary technical institution. The credit passes must include
Mathematics, Physics any TWO science subjects. Candidates must in addition obtain at
least a pass in English language.
4
2.0 CURRICULUM
1. The curriculum of all ND programme consists of four main components. These are:
1. General studies/Education
2. Foundation courses
3. Professional courses
4. Supervised Industrial Work Experience Scheme (SIWES)
3. The General Education/studies components shall account for not more than 15% of the total contact hours
for the programmes
4. Foundation courses include courses in Mathematics, Pure Science., Computer Science, Technical
Drawing, Descriptive Geometry and Statistics, etc. The number of hour will vary with the programme and
many account of hours will vary with the programme and many account for about 10-15% of the total contact
hour depending on the programmes.
5. Professional courses are course which give the student the theory and practical skills he needs to practice
his field of specialisation at the technician/technologist level. These may account for between 60-70% of the
contact hours depending on the programme.
6. Supervised industrial work experience (SIWES) shall be taken during the long vacation following the end
of the second semester of the first year. See detail of SIWES at Paragraph 7.0.
ND programme
The structure of the ND programme consists of four semester of class room, laboratory, field and workshop
activities in the college - and a semester (SIWES). Each semester shall be of seventeen (17) weeks duration
made up as follows.
1. 15 contact weeks of teaching, i.e lecture, recitation and practical exercise, etc and
2. 2 weeks for test, quizzes, examination and registration SIWES shall take place at the end
of the second semester of the first year for the ND programme.
5
4.0 ACCREDITATION
Each programme offered either at the ND and HND level shall be accredited by the NBTE before the
diplomates can be awarded either of the two diploma certificate. Details about the process of accreditation
for the award of the ND or HND programmes are available from the Executive Secretary, National Board for
Technical Education, Plot B, Bida Road, P.M.B 2239, Kaduna, Nigeria.
Institutions offering accredited programmes will award the National Diploma to candidates who successfully
completed the programme after passing prescribed course work, examination, diploma project and the
supervised industrial work experience. Such candidates should have completed a minimum of between 65 -
75 semester credit units depending on the programme.
6.1 The new curriculum is drawn in unit curses. This is in keeping with the provisions of the National Policy
on Education which stress the need to introduce the semester credit units which will enable a student who so
wish to transfer the units already completed in an institution of similar standards from which he is
transferring.
6.2 In designing the units, the principle of the modular system by the product has been adopted; thus making
each of the professional modules, when completed provides the students with technician operative skills,
which can be used for the employment purposes. Also, he cam move ahead for post ND studies.
6.3 As the success of the credit unit system depends on the articulation of the programmes between the
institution and industry, the curriculum content has been written in behavioural objectives, so that it is clear to
all, the expected performance of the student who successfully completed some of the courses to the
diplomate of the programme. There is slight departure in the presentation of the performance based
curriculum which requires the conditions under which the performance are expected to be carried out and
the criteria for the acceptable levels of performance. It is a deliberate attempt to further involve the staff of
thee department teaching the programme to write their own curriculum stating the conditions existing in their
institution under which the performance can take place and to follow that with the criteria for determining an
6
acceptable level of performance. Departmental submission of the final curriculum may be vetted by the
Academic Board of the institution for ensuring minimum standard and quality of education in the programmes
offered throughout the polytechnic system.
6.4 The teaching of the theory and practical work should, as much as possible, be integrated. Practical
exercises, especially those in profession course and laboratory work should bo be taught in isolation from
the theory. For each course, there should be a balance of theory practice in the ratio of 50:50 or 60:40 or the
reverse.
7.1 For the smooth operation of the SIWES the following guidelines shall apply:
1. Institution offering the ND programme shall arrange to place the students in the industry. By April 30 of
each year; six copies of the master list showing where each student has been placed shall be submitted to
the executive secretary, NBTE which shall, in turn authenticate the list and forward it to the Industrial
Training Fund, Jos.
2. The Placement Officer should discuss and agree with industry on the following:
i. A task inventory of what the students should be expected to experience during the period
of attachment. It may be wise to adopt the one already approved for each field.
ii. The industry - based supervisor of the students during the period likewise the institution
based supervisor.
iii. The evaluation of the students during the period. It should be noted that the final grading
of the student during the period of attachment should be weighted on the evaluation by his
industry-based supervisor.
In the evaluation of the student, cognisance should be taken of the following items:
a. Punctuality
b. Attendance
c. General Attitude to work
d. Respect for authority
e. Interest in the field/technical area
f. Technical competence as a potential technician in his field.
7
7.2 GRADING OF SIWES
To ensure uniformity of grading scale, the institution should ensure that uniform grading of student s work
which has been agreed to by all polytechnics is adopted.
The institution-based supervisor should initial the log book during each visit. This will enable him to check
and determine to what extent the objectives of the scheme are being met and to assist students having any
problems regarding the specific assignments given to them by their industry-based supervisor.
Institution should ensure that students placed on attachment are visited within one month of their placement.
Other visits shall be arranged so that
1. There is another visit six weeks after the first visit; and
2. A final visit in the last month of the attachment.
The rate of stipend payable shall be determined from time to time by the Federal Government after due
consultation with the Federal Ministry of Education, the Industrial Training Fund and the NBTE.
The completion of SIWES is important in the final determination of whether the student is successful in the
programme or not. Failure in the SIWES is an indication that the student has not shown sufficient interest in
the field or has no potential to become a skilled technician in his field. The SIWES should be graded also on
credit unit system. Where a students has satisfied all other requirements but failed SIWES, he may only be
allowed to repeat another four months SIWES at his own expense.
The candidates are expected to record and up-keep a personal logbook. This will contain daily and weekly
summary of curricular activities carried out by the candidates for each semester. The ND programme
coordinator of the department will supervise the assessment and evaluation of the log book.
8
CURRICULUM TABLE
ND PROGRAMME IN ELECTRICAL ENGINEERING TECHNOLOGY
1st SEMESTER
TOTAL 11 1 18 30 30
2ND SEMESTER
TOTAL 11 1 17 29 29
9
3RD SEMESTER
TOTAL 9 1 13 23 23
4TH SEMESTER
TOTAL 7 1 12 20 20
10
GENERAL STUDIES COURSES
Use of English
PROGRAMME: NATIONAL DIPLOMA ELECTRICAL ENGINEERING
Course: USE OF ENGLISH I (GRAMMAR) Course Code: GNS 101 Contact Hours:
30Hrs Lectures
General Objective 1.0: It will promote the necessary language skills which will enable student to cope
effectively.
1.1 Explain the necessity for acquiring Ask the students: Chalkboard,
good note-taking/making techniques - the techniques of note- Duster,
1.2 List the methods of note-taking/making taking/making and list the Recommended
1.3 Explain the use of dictionary various methods textbooks.
1.4 Explain the use of the library - the correct ways of using
1.5 Explain the type of information sources the dictionary
in the library - the best ways of using the
1 - 3 1.6 Identify good reading habits library
1.7 Explain the different methods of - to list the various
reading viz, scan, skim, normal and study information sources in the
1.8 Use the different methods of reading library and how to locate
explained in 1.7 above these information sources
- the different methods of
reading and the difference
between the methods
General Objective 2.0: Understand the basic roles of grammar, know the nature of the language,
appreciate literary words in English
2.1 Explain the concept of language Ask the students: Chalk and
2.2 List the characteristics of language - the basic concept of Blackboard
2.3 Explain the four language skills, viz: language
speaking, listening, writing, readings - to mention the
2.4 Explain the functions of language characteristics of
4 - 6 2.5 List the uses of English language in language
Nigeria, e.g as the language of research, - to identify the functions
government, commerce etc. of language
- to list the uses of
English language in
Nigeria
11
PROGRAMME: NATIONAL DIPLOMA ELECTRICAL ENGINEERING
Course: USE OF ENGLISH I (GRAMMAR) Course Code: GNS 101 Contact Hours:
30Hrs Lectures
12
PROGRAMME: NATIONAL DIPLOMA ELECTRICAL ENGINEERING
Course: USE OF ENGLISH I (GRAMMAR) Course Code: GNS 101 Contact Hours:
30Hrs Lectures
5.1 Give the meaning of literature Ask the students: Chalk, blackboard,
5.2 Trace the development of literature - the meaning of duster
5.3 Differentiate between the literary literature and the
genres development of
14 -
5.4 Explain the functions of literature literature
15
5.5 Explain the terminology of prose fiction, - the functions of
e.g plot setting, characterization etc literature and the
5.6 Answer an essay question on a given terminology of Prose
novel fiction
ASSESSMENT: The continuous assessment, tests and quizzes will be awarded 40% of the total
score. The end of the Semester Examination will make up for the remaining 60% of the total score.
13
Communication Skills I
Course: COMMUNICATION SKILL I Course Code: GNS 102 Contact Hours 30 HRS
LECTURES
General Objective 1.0: Acquire the necessary Communication Skills, techniques of correspondence
and comprehend within materials
ORAL PRESENTATION
2.1 Label a diagram of the organs of speech
2.2 Describe the functions of the organs in
2.1 above in speech production.
2.3 List the phonemes of English
2.4 Produce correctly each of the phonemes
listed in 2.3 above.
5 - 8 2.5 Pronounce correctly by making
distinctions between the different sound
contrasts in the consonantal and vowel
systems of English.
2.6 Explain the principles of effective
speaking, viz; correct use of stress, rhythm,
and information patterns.
2.7 Read fluently.
14
PROGRAMME: NATIONAL DIPLOMA ELECTRICAL ENGINEERING
Course: COMMUNICATION SKILL I Course Code: GNS 102 Contact Hours 30 HRS
LECTURES
General Objective 1.0: Acquire the necessary Communication Skills, techniques of correspondence
and comprehend within materials
ASSESSMENT: The continuous assessment, tests and quizzes will be awarded 40% of the total
score. The end of the Semester Examination will make up for the remaining 60% of the total score.
15
Communication Skills II
Course: COMMUNICATION SKILL II Course Code: GNS 202 Contact Hours 30 HRS
LECTURES
General Objective 1.0: Communicate clearly and effectively in both general and specific situations.
16
PROGRAMME: NATIONAL DIPLOMA ELECTRICAL ENGINEERING
Course: COMMUNICATION SKILL II Course Code: GNS 202 Contact Hours 30 HRS
LECTURES
General Objective 1.0: Communicate clearly and effectively in both general and specific situations.
ASSESSMENT: The continuous assessment, tests and quizzes will be awarded 40% of the total
score. The end of the Semester Examination will make up for the remaining 60% of the total score.
17
Report Writing
REPORT WRITING Y1/1ST SEMESTER 1/0/3HRS/WEEK.
General Objectives
1. Understand how to fill a log book for all technical works carried out
2. Understand how to present project proposal in the standard format
3. Understand the purpose and method of presenting different sections of a project report
4. Understand how to write non-technical report.
LIST OF ACTIVITIES/EXERCISES
18
Course: REPORT WRITING Course Code: EEC 114 Contact Hours:
1/0/3
General Objective 1.0: Understand how to fill a log book for all technical works carried out.
1.1 Fill a log book based on works carried out let the students know Log book;
1.2 Write report of a laboratory experiment carried out. what a log book is. Experiments,
(to include: Title of Experiment, Objectives, Background Ask student to fill a log Data, chalkboard
information (theory), Components, Equipment Procedure, book
1-4
schematic diagram(s), Result Analysis, Answers to Ask students to write a
questions.) simple laboratory report
1.3 Carry out assignment(s) on 1.1.
1.4 Carry out exercise(s) on 1.2.
2.1 Explain the purpose of the following sections in Let the students know Samples of
writing project proposal: the importance of each Project proposal,
1. Clients requirements sections in writing chalkboard.
2. Specification project proposal
5-8 3. Proposed drawing Ask students to list
4. Cost estimate of materials, labour etc. various clients
5. Execution period. requirement with their
2.2 Write samples of project proposals based on the specifications of the
items listed in (2.1) proposed diagram
3.1 Explain the purpose of each of the following sections Ask the students to Samples of a
of a project report: identify each section of a Technical Report,
1. Cover page project report. chalk, chalkboard.
2. Title page State them in the right
3. Approval page order.
4. Declaration page Ask them to write out
5. Table of contents each section separately.
6. Acknowledgements
9 -12
7. Abstract/Summary
8. List of Symbols/Abbreviation
9. List of Tables
10. List of Figures
11. Body of the project report, divided
into chapters
References i. Appendices.
3.2 Write a project report based on items listed in 3.1.
19
Course: REPORT WRITING Course Code: EEC Contact
114 Hours: 1/0/3
General Objective 1.0: Understand how to fill a log book for all technical works carried out.
4.1 Explain the purpose of non-technical Report writing Prepare a non - Samples of a
4.2 Explain the purpose and approximate contents of a non- technical Report Non-Technical
technical report including the following: Ask students to Report,
1. Background information on project identify the Chalkboard.
13 -
2. Progress report importance of its
15
3. New Development (if any) contents.
4. Response to correspondence (if any). Ask students to
5. Recommendation. write out each of the
4.3 Write a non-technical report based on items in 4.2 above. contents separately.
ASSESSMENT: The continuous assessment, tests and quizzes will be awarded 40% of the total
score. The end of the Semester Examination will make up for the remaining 60% of the total score.
General Objective : 1.0 Understand how to fill a log book for all technical works carried out.
20
Course: REPORT WRITING Course Code: EEC 114 Contact Hours:
0/0/3
General Objective : 1.0 Understand how to fill a log book for all technical works carried out.
PROJECT PROPOSALS
Write a project proposal for the customer requiring the
Aerial Installation.
LABORATORY ASSIGNMENTS
Write a Laboratory report on the Verification of Ohms
Law.
WORKSHOP ASSIGNMENTS -do- -do-
Write a report on the wiring of the room assignment. -do- -do-
7 - 15 TECHNICAL REPORT
Write essays on some research topic such as the
supply of electrical energy to a typical house in
Nigeria.
NON TECHNICAL REPORT
About midway in the Aerial Installation assignment
your Manager (Non Technical) has asked you to give
him a progress report of about one page length.
Provide one.
ASSESSMENT: The continuous assessment, tests and quizzes will be awarded 40% of the total
score. The end of the Semester Examination will make up for the remaining 60% of the total score.
21
Citizen Education
PROGRAMME: NATIONAL DIPLOMA ELECTRICAL ENGINEERING
22
PROGRAMME: NATIONAL DIPLOMA ELECTRICAL ENGINEERING
General Objective 3.0: Know the constitutional rights and obligations of Nigerian citizens
3.1 Examine the significance of rights Ask the students to identify the Chalk,
and obligations in Nigeria responsibilities and duties of Nigerian blackboard,
3.2 Assess government's protection of citizenship duster
fundamental rights as contained in the
Nigerian constitution
23
PROGRAMME: NATIONAL DIPLOMA ELECTRICAL ENGINEERING
General Objective 5.0: Fundamental objectives and directive principles of state policy in Nigeria
5.1 State the fundamental obligations of government as Ask the students to explain the Chalk,
provided in the constitution directive principles and policy of blackboard,
5.2 Explain the general provisions of the fundamental the Nigerian government on duster
objectives and directive principles of state policy cultures, the mass media,
5.3 Explain the political, economic, social and education national ethnics and duties of the
policies of Nigeria citizen
5.4 Explain the directive principles and policy of the
13 - Nigerian government on culture, the mass media,
15 national ethics and duties of the citizen
5.5 Assess the conformity observance and application of
the fundamental objectives and directive principles of
state policy by governments and people of Nigeria.
5.6 Recommend improvements on the provision
conformity, observance and application of the
fundamental objectives and directive principles of state
policy
ASSESSMENT: The continuous assessment, tests and quizzes will be awarded 40% of the total score. The
end of the Semester Examination will make up for the remaining 60% of the total score.
24
MATHEMATICS COURSES
Algebra and Elementary Trigonometry
General Objectives
1. Understand the laws of indices and their application in simplifying algebraic expressions.
2. Understand the theory of logarithms and surds and their applications in manipulating
expressions.
3. Understand principles underlying the construction of charts and graphs.
4. Know the different methods of solving quadratic equations.
5. Understand permutation and combination
6. Understand the concept of set theory
7. Understand the properties of arithmetic and geometric progressions
8. Understand the binomial theorem and it's application in the expansion of expressions and
in approximations.
9. Understand the basic concepts and manipulation of vectors and their applications to the
solution of engineering problems.
10. Understand the concept of equations and methods of solving different types of equations
and apply same to engineering problems.
11. Understand the definition, manipulation and application of trigonometric functions.
General Objective 1.0: Understand laws of indices and their applications in simplifying algebra
expressions
25
COURSE: ALGEBRA AND ELEMENTARY COURSE CODE: MTH CONTACT HOURS:
TRIGONOMETRY 112 15 HRS LECTURE 15
HRS TUTORIAL
General Objective 2.0: Understand Theory of logarithms surds and their applications in manipulating
expression
General Objective 3.0: Understand Principles underlying the construction of Charts and graphs
3.1 Construct graphs of functions fractions such as Ask the students to -do-
Y = ax +b, n = 1,2 draw graphs
Y = CST (a+x) Y = axk, including cases of
4
asymbles
3.2 Apply knowledge from 3.1 in determination as
laws from experimental data.
26
COURSE: ALGEBRA AND ELEMENTARY COURSE CODE: MTH CONTACT HOURS:
TRIGONOMETRY 112 15 HRS LECTURE 15
HRS TUTORIAL
General Objective 4.0: Know the different methods of solving quadratic equations
27
COURSE: ALGEBRA AND ELEMENTARY COURSE CODE: MTH CONTACT HOURS:
TRIGONOMETRY 112 15 HRS LECTURE 15
HRS TUTORIAL
General Objectives 7.0: Understand the properties of arithmetic and geometric progressions
7.1 Define an Arithmetic progression (A.P.) Ask the students to apply -do-
7.2 Obtain the formula for nth term and the first n progression to solve
terms of an A.P. problems
7.3 Give examples of the above e.g. find the 20th
term of the series e.g. 2 + 4 + 6 + .. Find also the
series of the first 20 terms.
7.4 Define a geometric progression (G.P.)
7.5 Obtain the formula for the nth term and the first
8-9
n terms of a geometric series.
7.6 State examples of 7.5 above e.g. given the
sequences 1/3, 1,3 find the 20th term and hence
the sum of the 1st 2o terms.
7.7 Define Arithmetic Mean (AM) and Geometric
Mean (G.M.)
7.8 Define convergency of series.
7.9 Define divergence of series.
28
COURSE: ALGEBRA AND ELEMENTARY TRIGONOMETRY COURSE CONTACT HOURS:
CODE: MTH 15 HRS LECTURE 15
112 HRS TUTORIAL
General Objectives 8.0: Understand the binomial theorem and it's application in the expansion of
expressions and in approximations.
9.1 State the definitions and representations of vectors. Apply the -do-
9.2 Define a position vector. techniques of
9.3 Define unit vector vectors to
9.4 Explain scalar multiple of a vector solve various
9.5 List the characteristics of parallel vectors problems
9.6 Identify quantities that may be classified as vector e.g.
displacement velocity, acceleration, force etc.
9.7 Compute the modulus of any given vector up to 2 and 3
dimensions.
11
9.8 State the parallelogram law in solving problems including addition
and subtraction of vectors
9.9 Apply the parallelogram law in solving problems including addition
and subtraction of vectors.
9.10 Explain the concept of components of a vector and the meaning
of orthogonal components.
9.11 Resolve a vector into its orthogonal components.
9.12 List characteristics of coplanar localized vectors.
9.13 Define the resultant or composition of coplanar vectors.
29
COURSE: ALGEBRA AND ELEMENTARY TRIGONOMETRY COURSE CONTACT HOURS:
CODE: MTH 15 HRS LECTURE 15
112 HRS TUTORIAL
General Objectives 9.0: Understand the basic concepts and manipulation of vectors and their applications to
the solutions of engineering problems
9.14 Compute the resultant of coplanar forces acting at a point using Apply the -do-
algebraic and graphical methods. techniques of
9.15 Apply the techniques of resolution and resultant to the solution of vector to
problems involving coplanar forces. solve various
9.16 Apply vectoral techniques in solving problems involving relative problems
velocity.
12
9.17 State the scalar product of two vectors.
9.18 Compute the scalar product of given vectors.
9.19 Define the cross product of the vector product or two vectors.
9.20 Calculate the direction ratios of given vectors.
9.21 Calculate the angle between two vectors using the scalar
product.
General Objectives 10.0: Understand the Concept of equations and apply same to engineering problems
10.1 Explain the concept of equation, ie. A = B where A and B are Ask the -do-
expressions. student to
10.2 List different types of equations:- Linear, quadratic, cubic, etc. solve various
10.3 State examples of linear simultaneous equations with two equations as
unknowns and simultaneous equations with at least one quadratic indicated in
equation. section 10
13 - 10.4 Apply algebraic and graphical methods in solving two
14 simultaneous equations involving a linear equation and a quadratic
equation.
10.5 Apply the algebraic and graphical methods in solving two
simultaneous quadratic equations.
10.6 Define a determinant of nth order.
10.7 Apply determinants of order 2 and 3 in solving simultaneous
linear equations.
30
COURSE: ALGEBRA AND ELEMENTARY TRIGONOMETRY COURSE CONTACT HOURS:
CODE: MTH 15 HRS LECTURE 15
112 HRS TUTORIAL
General Objectives 11.0: Understand the definition, manipulation and application of trigonometric functions
11.1 Define the basic trigonometric ratios, sine, cosine and tangent of Define and -do-
an angle. Derive the
11.2 Derive the other trigonometric ratios; cosecant, secant and trigonometric
cotangent using the basic trigonometric ratios in 11.1 above. ratios and
15
11.3 Derive identities involving the trigonometric ratios of the form; identities
Cos2 + Sin2 = 1, Sec2 = 1 + tan2, etc.
11.4 Derive the compound angle formulae for sin (A+B), Cos (A+B)
and Tan (A+B).
ASSESSMENT: The continuous assessment, tests and quizzes will be awarded 40% of the total score. The
end of the Semester Examination will make up for the remaining 60% of the total score.
31
Calculus
General Objectives
1. Understand the basic concepts of differential calculus and its application in solving
engineering problems.
2. Know integration as the reverse of differentiation and its application to engineering
problems.
3. Understand first order homogenous linear ordinary differential equation's with constant
coefficients as applied to simple circuits.
4. Understand the basic concepts of partial differentiation and apply same to engineering
problems.
General Objective: 1.0 Understand the basic concepts of differential Calculus and in application in
solving engineering problems
1.1 Define limits with examples Teachers are to give and Chalkboard,
1.2 State and prove basic theorems on limits solve simple engineering textbooks, lecture
1.3 Prove that lim sin /, lim Tan / = 1 as 0 and technological problems notes, chalk
1.4 Define differentiation as an incremental notation
or a function.
1.5 Differentiate a function from first principles.
1.6 Prove the formulae for derivative of functions,
Function of a function, products, and quotient of
functions.
1-4
1.7 Differentiate simple algebraic, trigonometric,
logarithmic, exponential, hyperbolic parametric,
inverse and implicit functions.
1.8 Derive second derivative of a function.
1.9 Apply differentiation to simple engineering and
technological problems.
1.10 Explain the rate of change of a function
1.11 Explain the condition for turning point of a
function.
32
PROGRAMME: NATIONAL DIPLOMA IN ELECTRICAL ENGINEERING
General Objective: 1.0 Understand the basic concepts of differential Calculus and in application in
solving engineering problems
General Objective 2.0: Know integration as the reverse of differentiation and its application to
engineering problems
33
PROGRAMME: NATIONAL DIPLOMA IN ELECTRICAL ENGINEERING
General Objective 2.0: Know integration as the reverse of differentiation and its application to
engineering problems
curves.
2.15 Find approximate area under a curve applying Trapezoidal method.
2.16 Find approximate area under a curve applying Simpson's rule.
2.17 Compare result obtained from Trapezoidal and Simpson's rules with the results by direct
integration.
2.18 Apply integration to kinematics.
General Objective 3.0: Understand first order homogenous linear ordinary equations with constant
coefficients as applied to simple engineering problems
3.1 Define first order differential equation Ask students to apply -do-
3.2 List order, degree, general solution, boundary or differential equation to solve
initial conditions and particular solution of differential engineering problerns
equations.
3.3 List examples of various types of first order
differential equations.
3.4 Define first order homogenous differential
equations
3.5 List the methods of solving differential equations
by separable variables.
9 - 12 3.6 Identify differential equations reducible to the
homogenous form.
3.7 Explain exact differential equations.
3.8 Solve exact differential equations, e.g. (a) Show
that (3x2 + y cos x) dx+(sin x-4y3) dy = O is an exact
differential equation. (b) Find its general solution.
3.9 Define integrating factors.
3.10 Determine the solution of differential equations
using integrating factors.
3.11 Define linear differential equations of the first
order.
34
PROGRAMME: NATIONAL DIPLOMA IN ELECTRICAL ENGINEERING
General Objective 4.0: Understand the basic concepts of partial differentiation and apply same to
engineering problems
Assessment: The continuous assessment, test and quizzes will be awarded 40% of the total score.
The end of the semester Examination will make up for the remaining 60% of the score
35
Logic and Linear Algebra
General Objectives
1. Understand the basic rules of mathematical logic and their application to mathematical
proofs.
2. Know permutations and combinations
3. Compute the binomial expansion of algebraic expansions.
4. Understand the algebraic operations of matrices and determinants as well as solve
simultaneous linear equations by the methods of matrices.
COURSE: LOGIC AND LINEAR ALGEBRA COURSE CODE: MTH 202 CONTACT HOURS:
15 HRS LECTURE
15 HRS TUTORIAL
General Objective 1.0: On completion of this course, the students should be able to:
1.1 The essential connectives, negation, Explain and illustrate 1.1 to 1.6 Lecture notes,
conjunction, disjunction, implication and bi- and ask the students to find the Recommended
implication truth value of the logic statement textbooks, charts,
1.2 State the essential connectives defined Assess the student chalkboard
in 1.1 above.
1.3 Explain grouping and parenthesis in
logic,
1.4 Explain Truth Tables.
1.5 Define tautology
1.6 Give examples of types of tautology. e.g
5. If P and Q are distinct atomic sentences,
1-2
which of the following are tautologies?
(a) P - Q (b) PUQ - QUP (c) PV(P*Q)
ii. Let P = Jane Austen was a contemporary
of Beethoven.
Q = Beethoven was a contemporary of
Gauss.
R = Gauss was a contemporary of
Napoleon
S = 'Napoleon was a contemporary of Julius
Caesar'.
(Thus P, Q and R and true, and S is false).
36
COURSE: LOGIC AND LINEAR ALGEBRA COURSE CODE: MTH 202 CONTACT HOURS:
15 HRS LECTURE
15 HRS TUTORIAL
General Objective 1.0: On completion of this course, the students should be able to:
1.7 Define universal quantifier and Explain and illustrate 1.7 to 1.2 Recommended
existential quantifier. and asked the students to solve textbooks, lecture
1.8 Translate sentences into symbolic form problems on 1.7 to 1.11 notes, chalkboard,
using quantifiers. e.g. 'some freshmen are chalk
intelligent' can be stated as for some x, x,is
a freshman and x is intelligent' can translate
3 - 4 in symbols as (/x) (Fx & Ix).
1.9 Define the scope of a quantifier
1.10 Define 'bound' and 'free' variables
1.11 Define 'term' and formula'
1.12 Give simple examples of each of 1.9 to
1.11 above.
1.13 Explain the validity of formulae
2.1 Define permutations and combinations Explain and illustrate the activities Recommended
2.2 Give illustrative examples of each of 2.1 in 2.1 to 2.15 and ask the student textbooks, lecture
above to: notes, chalkboard,
2.3 State and approve the fundamental - establish the chalk
principle of permutation. formula NPr =
2.4 Give illustrative examples of the n!/(n-r)!
5 - 7 fundamental principles of permutation. - Prove that nPr =
2.5 Establish the formula nP r = n!/ (n - r)! (n-r+1)(nP(r-1)
2.6 Prove that nPr = (n - r + 1) x nP (r - 1). - Establish the
2.7 Solve problems of permutations with formula Ncr =
restrictions on some of the objects. n!/[n-r!r!
2.8 Solve problems of permutations in which - Prove that nCr =
the objects may be repeated. nCn-r
37
COURSE: LOGIC AND LINEAR ALGEBRA COURSE CODE: MTH 202 CONTACT HOURS:
15 HRS LECTURE
15 HRS TUTORIAL
3.1 Explain with illustrative examples - the Explain and illustrate activities in Recommended
method of mathematical induction. 3.1 to 3.7 and ask the students to textbooks, lecture
3.2 State and prove binomial theorem for solve them notes, chalkboard,
positive integral index. chalk, etc
3.3 Explain the properties of binomial
expansion.
3.4 State at least seven (7) examples of 3.3
above. e.g.
i. A (x2 - 1/x)
ii. Find the constant term in
8 - 10 the expansion of (x + 1/x)A
iii. Find the co-efficient of xv
in the expansion of (x + k)A
where v is a number lying
between -n and n-
3.5 State the binomial theorem for a rational
number
3.6 State the properties of binomial co-
efficients.
3.7 Apply binomial expansion in
approximations (simple examples only).
38
COURSE: LOGIC AND LINEAR ALGEBRA COURSE CODE: MTH 202 CONTACT HOURS:
15 HRS LECTURE
15 HRS TUTORIAL
39
COURSE: LOGIC AND LINEAR ALGEBRA COURSE CODE: MTH 202 CONTACT HOURS:
15 HRS LECTURE
15 HRS TUTORIAL
column are added to the corresponding elements of any other row or column, the value of the
determinant itself is multiplied by the constant".
4.14 State five examples of each of the theorems in 4. 10-4 13 above.
11 - 4.15 Define the adjoint of a matrix
15 4.16 Explain the inverse of a matrix.
4.17 State the linear transformations on the rows and columns of a matrix.
4.18 Apply Crammer's rule in solving simultaneous linear equation.
4.19 Apply Linear transformation in solving simultaneous linear equations.
Assessment: The continuous assessment, tests and quizzes will be awarded 40% of the total score.
The end of the Semester Examination will make up for the remaining 60% of the total score
40
Trigonometry and Analytical Geometry
General Objectives
1.1 Convert sums and differences of trigonometric ratios to Illustrate with Recommended
products: good examples textbooks, lecture
activities in 1.1 notes, chalkboard,
to 1.10 and ask chalk, etc
the students to
solve problems
on them.
1.2 Prove the sine and cosine formulae of triangles
Assess the
1.3 Solve triangles using the sine and cosine formulae e.g.:- The
student
sides a,b,c, of a triangle are 4cm, 5cm, and 6cm respectively. Find
the angles.
1 - 3 1.4 Calculate angles of elevation and depression using
41
COURSE: TRIGONOMETRY AND ANALYTICAL GEOMETRY COURSE CONTACT
CODE: MTH HOUR: 2/0/0
122
1.9 Solve problems involving 1.8 and e.g.:- Draw the graph of 1/(cos 2)
Taking values from Q to 90 inclusive.
1.10 Apply the concepts in 1.8 above to three dimensional problems.
General Objective 2.0: Understand the concept of mensuration and its application to engineering
problems
General Objective 3.0: Understand the concept of analytical geometry and their applications
3.1 Explain two dimensional coordinate systems: Cartesian and Illustrate the Lecture notes,
Polar-coordinate systems. activities in 3.1 recommended
3.2 Explain plotting and sketching of graphs w.r.t. the two to 3.20 with textbooks,
coordinate systems. good examples chalkboards,
6 - 9 3.3 Relate Cartesian coordinate to polar coordinates. and ask the chalk, duster etc.
3.4 Explain the slope of a line in relation to the above concepts in students to Recommended
3.3. above. solve problems textbook, lecture
3.5 Explain the intercept of a line. on them. notes, chalkboard,
3.6 Derive the formula for the gradient of line passing through two Assess the chalk etc.
42
COURSE: TRIGONOMETRY AND ANALYTICAL GEOMETRY COURSE CONTACT
CODE: MTH HOUR: 2/0/0
122
General Objective 3.0: Understand the concept of analytical geometry and their applications
points. students
3.7 Derive the equation of a straight line given the gradient and Illustrate the
the co-ordinates of a point. activities in
3.8 Reduce a given linear equation to the intercept form. x/a + y/b 3.21 to 3.26
=1 and ask the
3.9 Determine the coordinates of the point of intersection of two students to
straight lines. solve problems
3.10 Define locus on them
3.11 Derive the slope-intercept form of the equation of a straight
line: y = mx+c
3.12 Derive the point - slope form of the equation of a straight line:
y - y1 = m(x - x1)
3.13 Derive the double - point form of the equations of the straight
line:
3.21 Derive the equation of a circle with center outside the origin.
3.22 State general equation of a circle.
10 -
3.23 Determine the coordinates of the center of a circle from a
11
given equation of a circle.
3.24 Draw orthogonal circles
43
COURSE: TRIGONOMETRY AND ANALYTICAL GEOMETRY COURSE CONTACT
CODE: MTH HOUR: 2/0/0
122
General Objective 3.0: Understand the concept of analytical geometry and their applications
3.25 Find the equations of the tangent and the normal at a point
circle
3.26 List illustrative examples of each of 3.20 to 3.25 above
Assessment: The continuous assessment, tests and quizzes will be awarded 40% of the total score.
The end of the Semester Examination will make up for the remaining 60% of the total score
44
BUSINESS COURSES
Entrepreneurship Development I
PROGRAMMES: ELECTRICAL ENGINEERING
3.1 Define the concepts: planning, Lecture and illustrate with examples. Chalkboard
business enterprise and project. Highlight to the students the initial
3.2 Explain the importance of planning to problems likely to be faced
3 a business enterprise. Invite a successful entrepreneur to
3.3 Analyse the skills and Techniques of deliver lecture to the students.
starting and managing small business
successfully.
3.4 Prepare and present project proposal. Lecture and introduce the students to Chalkboard
4 - 5 3.5 Manage a small business profitably. the formats of various project
proposals.
45
PROGRAMMES: ELECTRICAL ENGINEERING
General Objective 4.0: Know how to operate simple stock keeping records
4.1 Ordering spare parts/materials 4.2 Lecture and demonstrate to students Store or any
Receipt of parts/materials 4.3 Storage of how to write receipt and keep records storage facility
6
parts/materials4.4 Issue of of ordering, storage and issue Record note-books.
parts/materials materials.
General Objective 5.0: Know how to prepare and operate cash flow on spreadsheets
5.1 Need for different records (capital, Lecture and demonstrate for the Chalkboard and
revenue, credit transaction, tax) students to appreciate Give practical Computer
7-8
5.2 Formatting spreadsheet exercise to students.
5.3 Operating spreadsheet
46
PROGRAMMES: ELECTRICAL ENGINEERING
47
PROGRAMMES: ELECTRICAL ENGINEERING
48
COMPUTER COURSES
Introduction to Computer Software
EEC 112 INTRODUCTION TO COMPUTER SOFTWARE Y1/1ND SEM 1/0/2 HRS/WK
Outcomes:
On completion of this module, the student should be able to:
1. Understand the basics functions of a computer as a human-machine interacting system.
2. The relationship between the computer - human interface.
3. Operating Language of Individual packages and their functions.
PROGRAMME: ELECTRICAL ENGINEERING
Course: Introduction to Computer software Course Code: EEC 112 Contact Hours:
2/0/3
Course Objectives: To give the students the skill needed to appreciate the use of computers and us
specialist software Packages in a competent manner, within their own engineering specialty. The learning
methodology should be student centered, with the student using various available packages in order to be
competent when using them. The use of student workbooks or guided learning materials is recommended.
Key Objectives: The outcome from the learning process should be that the student would be able to do the
following.
1.6. Demonstrate how data is stored Explain the need for data storage.
i. RAM Dismantle a computer system and show the
2
ii. ROM students the RAM card, the Hard Disk and
iii. Fixed discs the Processors.
49
PROGRAMME: ELECTRICAL ENGINEERING
Course: Introduction to Computer software Course Code: EEC 112 Contact Hours:
2/0/3
Course Objectives: To give the students the skill needed to appreciate the use of computers and us
specialist software Packages in a competent manner, within their own engineering specialty. The learning
methodology should be student centered, with the student using various available packages in order to be
competent when using them. The use of student workbooks or guided learning materials is recommended.
Key Objectives: The outcome from the learning process should be that the student would be able to do the
following.
50
PROGRAMME: ELECTRICAL ENGINEERING
Course: Introduction to Computer software Course Code: EEC 112 Contact Hours:
2/0/3
Course Objectives: To give the students the skill needed to appreciate the use of computers and us
specialist software Packages in a competent manner, within their own engineering specialty. The learning
methodology should be student centered, with the student using various available packages in order to be
competent when using them. The use of student workbooks or guided learning materials is recommended.
Key Objectives: The outcome from the learning process should be that the student would be able to do the
following.
51
PROGRAMME: ELECTRICAL ENGINEERING
Course: Introduction to Computer software Course Code: EEC 112 Contact Hours:
2/0/3
Course Objectives: To give the students the skill needed to appreciate the use of computers and us
specialist software Packages in a competent manner, within their own engineering specialty. The learning
methodology should be student centered, with the student using various available packages in order to be
competent when using them. The use of student workbooks or guided learning materials is recommended.
Key Objectives: The outcome from the learning process should be that the student would be able to do the
following.
v. Importing and
exporting graphics
vi. Windows
'Clipboard' facility
vii. Creating and
manipulating
7-9
images (re-sizing
etc).
viii. Image file
standard (JPEG,
PCX, GIF etc)
ix. Printing
10 - (decimal places,
alpha-numeric)
11
iv. Creating and
saving worksheets
v. Creating a formula
in cells
vi. Importing objects
vii. Exporting the
worksheet
viii. Creating and
manipulating
52
PROGRAMME: ELECTRICAL ENGINEERING
Course: Introduction to Computer software Course Code: EEC 112 Contact Hours:
2/0/3
Course Objectives: To give the students the skill needed to appreciate the use of computers and us
specialist software Packages in a competent manner, within their own engineering specialty. The learning
methodology should be student centered, with the student using various available packages in order to be
competent when using them. The use of student workbooks or guided learning materials is recommended.
Key Objectives: The outcome from the learning process should be that the student would be able to do the
following.
graphical
10 - representations of
11 data
ix. Printing
12 - images
v. Importing &
13
exporting graphics
vi. Windows
'Clipboard' facility
vii. Creating &
manipulating images
(re-sizing etc)
viii. Image file
standards (JPEG,
PCX, GIF etc)
ix. Printing
1.15. Use the Internet to retrieve Show students how to look on to the
information. Internet.
14 - i. World Wide Web Write and send an email.
15 (WWW) Surf the net.
ii. Download
information
53
PROGRAMME: ELECTRICAL ENGINEERING
Course: Introduction to Computer software Course Code: EEC 112 Contact Hours:
2/0/3
Course Objectives: To give the students the skill needed to appreciate the use of computers and us
specialist software Packages in a competent manner, within their own engineering specialty. The learning
methodology should be student centered, with the student using various available packages in order to be
competent when using them. The use of student workbooks or guided learning materials is recommended.
Key Objectives: The outcome from the learning process should be that the student would be able to do the
following.
Assessment: Coursework 20%; Course test 20%; Practical 10%; Examination 50%.
Competency: The student should be expose to understand basic computer programming.
References:
1. Chapra, S.C. and Canale, R.P. "Introduction to Computing for Civil Engineers,
Mcgrew hil, 1994
2. Press, W.H., Teukolsky, S.A., Vetterling, W.T. and Fannery, B.P. "Numerical
recipes". Cambridge Univ. Press, 1993.
54
Introduction to Computer Hardware I
EEC 117 COMPUTER HARDWARE I Y1/2NDSEM 1/0/2 HRS/WK
OUTCOME:
On completion of this module, the student should be able to identify and assemble computer units and make
them operational.
Course Specification: Theoretical Content COURSE CODE: EEC 117 CONTACT HOUR: 15 HRS
LECTURE 15 HRS PRACTICAL
General Objective: 1.0 Diagnose simple faults on a computer and rectify them
1-3 1.1 Explain briefly the evolution of Introduce the students to Computer auxiliary units, Computer
Computer from ENIAC to present technical aspects of cables peripherals, tools and measuring
technology. connecting the units. instruments and central processing
1.2 List major sub units of a Explain how data is units, I/O devices.
Computer ( Mother board (XT and transferred down the cables
4-5 AT), Drives (Hard disk, Floppy, CD- and the type of hand-shake
ROM, Zip), Ports. methods used.
1.3 Explain briefly the operation of
Computer
1.4 Draw a block diagram showing
the interconnection of the Sub-units
of the mother board.
1.5 Identify the memory, ports, CPU,
power supply, battery supply for
memory retention
55
COURSE: COMPUTER HARDWARE I
Course Specification: Theoretical Content COURSE CODE: EEC 117 CONTACT HOUR: 15 HRS
LECTURE 15 HRS PRACTICAL
General Objective: 1.0 Diagnose simple faults on a computer and rectify them
ASSESSMENT:- The Practical class will be awarded 40% of the total score. Continuous assessment,
test and quizzes will take 10% of the total score, while the remaining 50% will be for the end of the
semester examination
56
Computer Hardware II
EEC 247 Computer Hardware II Y2/4th SEMESTER 1/0/2 Hrs/wk
OUTCOMES:
On completion of this module, the student should be able to diagnose simple faults on a computer and rectify
them.
Course: COMPUTER SOFTWARE II Course Code: EEC 247 Contact Hour: 15hrs
Theory, 15hrs. Practical
1-2 Simple Fault finding on Computers. In this module Instructors Computer auxiliary units,
1.1 Draw up a list of possible faults that should give students activity to computer peripheral units,
4 - 3 could be easily identified from external explore with ample time to central processing
symptoms. (Area of concern are Power absorb the difficult issues units(CPU), I/O devices,
5 - 6 supplies, Clocks, Memory battery low, I/O involved, and to ask questions tools and measuring
ports, disk drives voltages, keyboard, almost on a one to one basis. instruments.
monitors, disc drives, scratches on discs) Instructor should help the
1.2 Identify faults on the mother-board students draw the list of faults
from symptoms on the monitor. to build up a database for
1.3 Evaluate if fault is hard ware or soft diagnosis.
ware Instructor should attempt to
1.4 Connect drives to Mother board collect faulty boards for
1.5 Test student use whenever
possible and use them in the
workshop.
57
PROGRAMME: ND IN ELECTRICAL ENGINEERING TECHNOLOGY
Course: COMPUTER SOFTWARE II Course Code: EEC 247 Contact Hour: 15hrs
Theory, 15hrs. Practical
9 - 11 computer
12
ASSESSMENT: The Practical class will be awarded 40% of the total score. The continuous
assessments, tests and quizzes will take 10% of the total score, while the remaining 50% will be for
the end of the Semester Examination score
58
MECHANICAL ENGINEERING COURSES
Basic Workshop Technology and Practice
MEC 112 BASIC WORKSHOP TECHNOLOGY AND PRACTICE YI/1 ST SEMESTER 1/0/2 Hrs/Wk
OUTCOMES:
COURSE: Basic Workshop Technology & Practice CODE: MEC 112 CONTACT HOURS: 1
HOUR PER WEEK
1.1 Observe safety precautions Ask students to observe safely Chalkboard, textbooks,
1.2 Use protective wears precaution in the workshop micrometer screw
1.3 Observe all safety rules and regulation. Discuss some unsafe acts in gauge, vernier calliper,
the workshop. steel rule, drill bits.
Ask students to list out
protective wears in the
workshop.
1-4
Discuss the types.
Discuss and list out safety
rules in the workshop
Discuss and differentiate
between measuring and
testing.
Explain the principle and
59
PROGRAMME: NATIONAL DIPLOMA IN MECHANICAL ENGINEERING
COURSE: Basic Workshop Technology & Practice CODE: MEC 112 CONTACT HOURS: 1
HOUR PER WEEK
construction of micrometer
screw gauge and vernier
calipers.
1-4 Perform simple measuring
exercises using steel rule,
vernier calipers and
micrometers
2.1 Discuss the nomenclature of a twist drill Ask student to grind drill bits -do-
2.2 Discuss the formulae for calculation of accurately Ask students to
speed of various sizes of drills select correct drilling speed
n = v x 1000
5-7
xd
n = no. of rev/min
d = dia of drill in min
v = cutting speed
3.1 Select correct tapping drill size Calculate the tapping drill
3.2 Select correct taps size for v-threads.
3.3 Fabricate metal container by knock-up Discuss and indicate how
joining thread are characterised a.
3.4 Carry out soft soldering Pitch b. No. of starts c. Profile
of thread d. Direction of thread
8-9 Discuss in detail
Discuss the various metal
joining methods
Distinguish between
soldering and brazing
Discuss the importance of
using flux.
60
PROGRAMME: NATIONAL DIPLOMA IN MECHANICAL ENGINEERING
COURSE: Basic Workshop Technology & Practice CODE: MEC 112 CONTACT HOURS: 1
HOUR PER WEEK
General Objective 4.0: Know the various wood working tools and operations
4.1 Know and state the applications of the List and state the applications Try Square
following: of this tools Divider
9. Geometric/marking out Discuss with the student in gauges
tools e.g. try square, dividers more details the use of this Jack planes
and gauges tools Smooths
10. Planning tools e.g. Jack, Ask students to identify the Try plane
smooth, try planes, spoke tools in 4.1 and describe them. Panel saws
shaves, etc. Ask students to explain the Chisels
11. Cutting tools e.g. saws use and operation of the tool in Knives
chisels, knives, boring tools 4.1 Boring tools
12. Impelling tools e.g. Ask students to use the tools Hammers
hammer and mallets in 4.4 for the operations on an Mallets
13. Pneumatic tools exercise or training model. Portable saw
4.2 Describe portable electric hand tools in Ask student to identify the Portable planer
wood work, e.g. portable saw, portable machines in Portable drill
10 - planer, portable drill, portable sander and jig 4.5 State the safety Portable sander
15 saw. precaution on the machines in Jig saw
4.3 Explain the operations of the tools in 4.1 4.5
4.4 Carry out various woodwork operations
using the tools in 4.1
4.5 List basic wood working machine's such
as
1. Surface planning and
thickening machine
2. Circular sawing machine
3. Morticing machine
4. Drilling machine
5. Single ended tenning
machine
6. Band sawing machines
and safety precaution in
their operations
61
PROGRAMME: NATIONAL DIPLOMA IN MECHANICAL ENGINEERING
COURSE: Basic Workshop Technology & Practice CODE: MEC 112 CONTACT HOURS: 1
HOUR PER WEEK
General Objective 4.0: Know the various wood working tools and operations
ASSESSMENT: - The practical class will be awarded 40% of the total score. The continuous
assessment, tests and quizzes will be 10% of the total score, while the remaining 50% will be for the
end of the Semester Examination score.
1.1 Observe safety Let students know that when accident CO2 fire extinguisher
precautions happens on the workshop, they are caused Water hose
1.2 Operate safety equipment a. Discuss some unsafe acts Sand buckets
e.g. fire extinguishers, safety and condition in the workshop
water hose etc. Let students know why the workshop is
1.3 Use of protective wears arranged as it is vis-a-vis
1.4 Observe all safety rules a. gangway
and regulations b. exit doors
c. machine layout
d. illumination/ventilation
1-2 Ask students to differentiate between
a. type of fires and medium to
extinguish them operate fire
extinguishers.
List types of protective wears suitable for the
mechanical workshop
a. Overall
b. Safety boots
c. Eye glasses (safety)
d. Hand gloves etc.
Ask students to state safety rules applicable
62
COURSE: BASIC WORKSHOP COURSE CODE: MEC 112 CONTACT HOURS: L
TECHNOLOGY & PRACTICE = 1, P= 2 3HRS Per
/WK
2.1 Use marking-out tools on Ask students to differentiate between Work bench
the bench correctly a. Hand tools and machine Bench vice
2.2 Produce simple objects tools Hammers
using bench/hand tools such b. Bench tools and machine Set of drills
as files, chisels, scrapers, cutting tools Steel rule
saws etc. Ask students to list out marking out tools Scribers
2.3 Maintain files, dividers, used on the bench typical workshop practical Scribing blocks
saws, gauges try squares, exercises. Inside and outside
bevel edge square etc. a. Ask students to identify this caliper
bench cutting tools Surface place
b. Ask students to write Dividers
process sheet or operation Centre punches,
3
layout for the component to be hammers
produced. Files
Explain the use of this tools and their care Chisels
Explain the effect of not using this tools Scrapers
properly and keeping them in good working Hook saw
condition Bench drilling
machine & access
Sets of drills
Bevel edge sq.
File card or wine
brush
Chamous cloth
63
COURSE: BASIC WORKSHOP COURSE CODE: MEC 112 CONTACT HOURS: L
TECHNOLOGY & PRACTICE = 1, P= 2 3HRS Per
/WK
3.1 Perform simple measuring Ask students to differentiate the differing Micrometers-
exercises using steel rules, between measuring and testing in the external & internal
vernier calipers and workshop. Vernier calipers
micrometers. Ask students to use Steel rule
3.2 Use dial indicators to (i) a. measuring instruments Test mandrel/test bar
set up job jobs on the lathe (ii) b. testing instruments 070 x 300mm long
roundness testing etc. Explain dial indicator with
3.3 Carry out exercises a. the principle and stand
involving flatness squareness, construction of a micrometer
straightness and surface finish screw gauge
test. b. the least count of
micrometer
c. principle and construction of
4-5
a vernier caliper and the least
count.
d. The types of micrometers
e. The types of vernier calipers
f. Accuracy of a steel rule
Explain to the students the principle and
construction of a dial indicator, their types and
their accuracy
Show students the following:
a. Types of surface finish
achievable in the workshop
b. Differentiate between
flatness, and straightness.
64
COURSE: BASIC WORKSHOP COURSE CODE: MEC 112 CONTACT HOURS: L
TECHNOLOGY & PRACTICE = 1, P= 2 3HRS Per
/WK
3.4 Perform taper a. Discuss different between the use of Vernier spirit level
measurement on jobs using protractor and sine bar and their limitations. surface roughness
vernier protractor and sine b. Ask students to state types of comparators tester (portable type)
bars. and use them to inspect jobs. SURF TEST 4
3.5 Inspect jobs using simple 900 angle gauge
comparators straight edge
vernier protractor
4-5
sine bar
set of standard slip
gauges
marking out table
bench comparator
0 - 100mm
S-d Test mandrels
65
COURSE: BASIC WORKSHOP COURSE CODE: MEC 112 CONTACT HOURS: L
TECHNOLOGY & PRACTICE = 1, P= 2 3HRS Per
/WK
5.1 Carry out reaming Ask students to do reaming operation on a Hand reamers
operations practical workshop exercise as figure 2 Machine reamers
a. on the Ask students to drill a ream small; and large Tap wrench
bench holes using correct speeds and feed and Jacobs chuck and
b. on appropriate lubricants. key
7 drilling/lathe Medium size Lathe
5.2 Select correct speeds for Reduction sleeves
reaming small and large Radial drilling
holes. machine
Pillar drilling machine
Reamers (machine)
6.1 Select correct tapping drill Ask students - the purpose of tapping Taps and wrenches
size operation Drill chuck and key
6.2 Select correct taps a. Calculate tapping drill size Lathe machine -
6.3 Carry out tapping using appropriate formulae medium size
operation (i) on the work Ask students to indicate how taps are Bench drilling
8
bench (ii) on drilling machine characterized machine
(iii) on lathe a. pitch of the thread Pillar drilling machine
b. number of starts Cutting fluid or
c. profile of the thread lubricants
d. direction of the thread
66
COURSE: BASIC WORKSHOP COURSE CODE: MEC 112 CONTACT HOURS: L
TECHNOLOGY & PRACTICE = 1, P= 2 3HRS Per
/WK
7.1 Fabricate metal container Ask students the various metal joining OXY-acetylene gas
by Knock-up joining operations welding set
7.2 Join metals by the Ask students to fabricate metal container by Manual rolling
grooving technique Knock-up joining machine
9 7.3 Carry out soft soldering Join metals by grooving technique. Guillotine shear
Assorted cutting
snips
Bending
machine/press brake.
8.1 Assemble OXY-acetylene Ask students to distinguish between soft Blow lamps
welding plant soldering and brazing Soldering iron
8.2 Select various welding Ask students to carryout soft soldering Soldering flux
regulators, clips, blow pipe exercise using appropriate soldering flux and Safety welding
and nozzles. assess goggles
8.3 Perform gas welding by Ask students to list out all the component Oxygen gas cylinder
10 various welding techniques parts of an OXY-acetylene welding plant and Acetylene gas
Gut by flame cutting technique identify them. cylinder
Ask students to assemble them Regulators, clips,
Ask students to identify this components and nozzles
select appropriately for welding exercise and Hoses, flash gas
assess lighter
Ask students the various welding techniques Welding nozzles
67
COURSE: BASIC WORKSHOP COURSE CODE: MEC 112 CONTACT HOURS: L
TECHNOLOGY & PRACTICE = 1, P= 2 3HRS Per
/WK
9.1 Regulate current and Ask students to determine polarity for metal Electric arc welding
determine polarity for metal arc welding and regulate current. Machine
arc welding Ask students to distinguish between down Face shield
9.2 Determine polarity and welding and up welding operation Welding table
select current Perform down and up welding operation Welding chipping
9.3 Perform various arc- Ask students to prepare appropriate metal hammer
11
welding joints by down and up edges for various metal thickness Wire brush
and hand operation. Hand gloves
9.4 Select and prepare metal Leather apron's
edges for various thickness Hand grinder
and technique welding Pedestal grinding
machine
General Objective 10.0: Employ various techniques for controlling distortion in welding operations
10.1 Apply correctly the stop Ask students to distinguish between stop Electric arc welding
back and skip method of back and skip method of controlling distortion machine
controlling distortion in welding. OXY-acetylene
10.2 Apply pre and post Apply these methods in welding exercise and welding plant
heating technique compare the results.
13 Ask students to distinguish between pre and
post heating techniques in controlling distortion
in welding operation
Ask students to state what materials require
pre and post heating when welding.
Ask students to apply this technique in
68
COURSE: BASIC WORKSHOP COURSE CODE: MEC 112 CONTACT HOURS: L
TECHNOLOGY & PRACTICE = 1, P= 2 3HRS Per
/WK
General Objective 10.0: Employ various techniques for controlling distortion in welding operations
welding exercises.
General Objective 11.0: Know the various wood working tools and operations
11.1 List and state the Ask students to list and state the applications Try square
applications of the following of this tools (a) - (e) Dividers
1. Geometric Ask students to mark out and prepare wood Gauges
/marking out to using tools in 11.1 on a practical exercise Jack plane
tools e.g. try Ask students to maintain tools in 11.1 using Smooth plane
square, appropriate materials and tools. Try plane
dividers and Ask students to use the tools in 11.4 for the Panel saws
gauges. operations on an exercise or training model Chisels
2. Planing Knives
tools e.g. Boring tools
jack, smooth, Hammers
try planes, Mallets
spoke shaves Oil stone
etc. Bench/table grinder
3. Cutting Oil can
14 tools, e.g. Portable saw
saws, chisels, Portable planner
knives, boring Portable drill
tools. Portable sander
4. Impelling Jig saw
tools e.g.
hammers and
mallets.
5. Pneumatic
tools.
11.2 Mark out and prepare
wood to give using the tools in
11.1
11.3 Maintain all tools in 11.1
11.4 Carry out various wood
work operations using the
69
COURSE: BASIC WORKSHOP COURSE CODE: MEC 112 CONTACT HOURS: L
TECHNOLOGY & PRACTICE = 1, P= 2 3HRS Per
/WK
General Objective 11.0: Know the various wood working tools and operations
tools in 11.4
12.1 Describe various types of Ask students to distinguish between thermo- Set of drill
plastic groups such as setting and thermo-plastic. Wood turning lathe
thermo-setting and thermo- Ask students the characteristics of each type. HSS cutting tools
plastic Ask students to use conventional metal Evostic glue
12.2 Use conventional metal cutting tools for operation on thermo-setting
cutting tools to perform and thermo-setting plastic. What is the result of
15 operations on each type in each operation ?
12.1 Ask students to join the thermo-setting and
12.3 Carry out joining thermo-plastic.
operations using plastics in
12.1
12.4 Review previous
activities and assess students.
ASSESSMENT: The practical class will be awarded 40% of the total score. The continuous
assessments, tests and quizzes will be 10% of the total score, while the remaining 50% will be for the
end of Semester Examination score.
70
Machine tools Technology and Practice
MEC 124 MACHINE TOOLS TECHNOLOGY AND PRACTICE YI/2 ND SEM 1/0/2 Hrs/Wk
OUTCOME:
COURSE: MACHINE TOOLS TECHNOLOGY & Course Code: MEC 124 Contact Hours: 6
PRACTICE Hrs Per/WK
1.1 Explain the theory of metal cutting Ask students to explain the
1.2 Define forces acting at a tool point theory of metal cutting
1.3 Sketch a diagram of forces acting at tool Ask students to list forces acting
point at and tool point
1.4 Relate the tool angles to cutting efficiency Ask students to draw a diagram
1 1.5 List the types of chip for motion of forces acting at tool point
1.6 Sketch diagram for 1.4 Ask students to name the types
1.7 List factors affecting 1.5 of chips that may be formed
Ask students to list factors
affecting the types of chips that
may be formed in cutting
General Objective 2.0: Understand the importance of cutting fluids in machining operation
2.1 Explain how heat is generated during Ask students to explain the Power saw
cutting function of cutting fluids in cooling suds.
2
2.2 List common types of cutting fluid machining operation. Mild steel bars
2.3 State functions of cutting fluid Ask students to cut metal bars
71
PROGRAMME: NATIONAL DIPLOMA IN MECHANICAL ENGINEERING TECHNOLOGY
COURSE: MACHINE TOOLS TECHNOLOGY & Course Code: MEC 124 Contact Hours: 6
PRACTICE Hrs Per/WK
General Objective 2.0: Understand the importance of cutting fluids in machining operation
2.4 Outline the characteristics of cutting fluid with and without cooling fluid to
2.5 Identify cutting fluids used for machining show the effect of the fluid
different materials
3.1 Out line the properties of cutting tools Ask students to list properties of
materials cutting tools.
3.2 List common types of cutting tools. Ask students to list types of
3.3 Outline constituents in 3.2 cutting tools and state the
3.4 Select cutting tools for various machine materials from which they are
3
operations made.
Ask students to select cutting
tools for some machining
operations e.g turning or shaping.
And assess.
General Objective 4.0: Know various types of lathes and their functions
4.1 Describe main types of lathes (such as Ask students to identify the main bars.
capstan, turret, centre and bench lathes) and lathe types
their accessories Ask students to sketch any type
4.2 Identify the various lathe types in 4.1 of lathe.
above Ask students to turn some mild
4.3 Describe the different operations that could steel bars.
be carried out on the lathe Ask students to turn tapers on
4
4.4 Identify any attachment necessary for the mild steel bars
various operations on the lathe Ask students to take all
4.5 List the safety precautions necessary while precautions for safety during
working on the lathe machine machining operations
4.6 List the various methods of carrying out
various operations e.g. taper turning, set screw
cutting.
72
PROGRAMME: NATIONAL DIPLOMA IN MECHANICAL ENGINEERING TECHNOLOGY
COURSE: MACHINE TOOLS TECHNOLOGY & Course Code: MEC 124 Contact Hours: 6
PRACTICE Hrs Per/WK
General Objective 5.0: Know various machining operations on the centre lathe
5.1 Perform the following using centre lathe Ask students to turn a mild steel Mild steel bars
1. facing operation bar to various diameter and lathe machine
2. Cylindrical turning Ask students to turn steps and Assorted cutting
3. step turning tapers tools
4. taper turning Ask students to use lathe for Cutting fluid
5. drilling boring, parting, knurling, reaming.
6. boring Ask students to cut threads on
5
7. parting mild steel bars.
8. knurling See figure 4 for example and
9. reaming assess
5.2 Carry out thread cutting operations on the
lathe
5.3 Carry out exercises involving operations in
5.1 and 5.2
General Objectives 6.0: Understand the features, functions and uses of shaping machines.
6.1 Describe the main features of shaping Ask students to list the features Shaping machine.
machines of shaping machines. Assorted tools
6.2 Describe how to adjust the length and Ask students to carry out the and Accessories.
position of the stroke of the shaping machine. adjustment of length and position Mild steel.
6.3 Describe the table feed on a shaping of the stroke of a shaping
machine machine
6.4 Explain how to set ht e clapper box of a Ask students to carry out
6
given operation. shaping operations on mild steel.
6.5 List the advantages of a swan-necked tool Ask students to cut various
on a shaping machine surface forms with different
6.6 Describe the methods of how to set up shaping tools
work-pieces on the shaping machine
6.7 Identify appropriate shaping tools for
different surface forms.
73
PROGRAMME: NATIONAL DIPLOMA IN MECHANICAL ENGINEERING TECHNOLOGY
COURSE: MACHINE TOOLS TECHNOLOGY & Course Code: MEC 124 Contact Hours: 6
PRACTICE Hrs Per/WK
7.1 Perform simple operations on a shaping Ask students to carry out simple
machine shaping operations
7.2 Cut key-way, slots etc, on shaping Ask students to use shaping
machines. machines for slots and key-ways.
7.3 Select the correct work holding devices for Assess
different operations on the shaping machine.
7.4 Select appropriate tools for different
shaping operations
General Objective 8.0: Understand the feature, function and uses of milling machines.
8.1 Describe the main features of milling Ask student to identify various Milling machine,
machines cutters used in milling machines Assorted cutters
8.2 Describe how to mount cutters on the Ask students to select tools and including arbor,
milling machine carry out milling operations e.g. plain shank etc.
8.3 Describe the various work piece and cutter surface milling. Dividing Head,
holding devices and attachments used on the Ask students to choose cutters Brass, Mild steel,
milling machine for the milling of mild steel, brass High Carbon Steel.
8.4 List and state the use of different types of or high carbon steel
7 milling cutters, e.g. arbor cutters - plain cutters,
shank cutters - and mills, T-slot side and mill
cutters etc.
8.5 Describe the features and working
principle of the dividing head.
8.6 Explain various methods of indexing e.g.
direct, simple, differential, angular indexing.
8.7 Identify cutters according to materials to be
milled and type of milling operations
9.1 Define feed and cutting speed as applied Ask students to explain feed and
8 to milling and state factors which influence cutting speed.
cutting speed determination for milling work, Ask students to explain
74
PROGRAMME: NATIONAL DIPLOMA IN MECHANICAL ENGINEERING TECHNOLOGY
COURSE: MACHINE TOOLS TECHNOLOGY & Course Code: MEC 124 Contact Hours: 6
PRACTICE Hrs Per/WK
e.g. material to be cut, use of coolant, type of relationship between feed and
finish etc. cutting speed.
9.2 Determine cutting speeds and feeds for a Ask students to carry out some
given milling work. milling operations while taking all
9.3 Out line the safety and operational necessary safety precautions
precautions to be observed when milling
9.4 Describe up and down milling
9.5 Describe straddle and gang milling
9.6 Describe the various features of the tool
and cutter grinder
10.1 Select and mount different types of Ask students to carry out various Assorted Cutter,
cutters for appropriate jobs. type of milling jobs with different Dividing head,
10.2 Select and use various types of work and type of cutters. Index plates.
cutter holding devices for different types of Ask students to carry out up
jobs. milling, down milling and gang
10.3 Perform milling exercises using the milling.
dividing head and index plates. Ask students to do many milling
9
10.4 Carry out milling using the following exercises using dividing head and
methods: index plates.
(i) Up milling
(ii) Down milling
(iii) Gang milling
10.5 Use tool grinder to sharpen milling
cutters.
General Objective 11.0: Understand the features and functions of grinding machines
11.1 Describe different types of grinding Ask students to name and Grinding
machines. identify in the workshop, different machines Assorted
10 11.2 Identify the main features of grinding types of grinding machines grinding wheels.
machines in 11.1 Ask students to select
11.3 Describe the structure of grinding wheels. appropriate grinding wheels for
75
PROGRAMME: NATIONAL DIPLOMA IN MECHANICAL ENGINEERING TECHNOLOGY
COURSE: MACHINE TOOLS TECHNOLOGY & Course Code: MEC 124 Contact Hours: 6
PRACTICE Hrs Per/WK
General Objective 11.0: Understand the features and functions of grinding machines
11.4 Identify wheels for grinding different types different types of grinding
of materials. machines.
12.1 Explain the surface grinding operation Ask students to carry out
12.2 Explain taper grinding operation surface, taper, tool and cutter,
10 12.3 Explain tool and cutter grinding and centreless
12.4 Explain centreless grinding Ask students to describe gauge
12.5 Describe gauge grinding grinding
General Objective 13.0: Understand testing, mounting, balancing, alignment and trueing of grinding
wheels.
13.1 Explain wheel testing and mounting Ask students to explain wheel
13.2 Explain wheel balancing and alignment. testing and mounting.
11 13.3 Describe wheel dressing and trueing. Ask students to explain wheel
balancing and alignment as well
as wheel dressing and trueing.
14.1 Select work holding devices and use Ask students to sharpen cutters
them on grinding machine
14.2 Carry out different types of grinding
12 operation
14.3 Select the appropriate shapes, types and
sizes of grinding wheels for various
applications
General Objective 15.0: Demonstrate skills in wheel grinding, trueing and dressing
76
PROGRAMME: NATIONAL DIPLOMA IN MECHANICAL ENGINEERING TECHNOLOGY
COURSE: MACHINE TOOLS TECHNOLOGY & Course Code: MEC 124 Contact Hours: 6
PRACTICE Hrs Per/WK
General Objective 15.0: Demonstrate skills in wheel grinding, trueing and dressing
13 internal grinding.
General Objective 16.0: Understand and apply sheet metal work techniques
16.1 Carry out cutting operations Ask the students to carry out
16.2 Carry out bending operations cutting, bending and rolling of
16.3 Carry out Rolling operations sheet metal
14 - Ask the students to develop
15 graphically and produce from
sheet metal a vessel with spout
that intersect e.g. oil can,
watering can, kettle etc Assess.
ASSESSMENT: The practical class will be awarded 40% of the total score. The continuous
assessment, tests and quizzes will be 10% of the total score, while the remaining 50% will be for the
end of the Semester Examination score.
77
DRAWING COURSES
Technical Drawing
MEC 111 TECHNICAL DRAWING YI/1 ST SEM 0/0/4 Hrs/WK
OUTCOMES:
1. Know different drawing instruments, equipment and materials used in technical drawing.
2. Know graphical communication.
3. Know the construction of simple geometrical figures and shapes.
4. Know Isometric and Oblique Protections.
5. Know single orthographic projections.
6. Understand the interactions of regular solids.
General Objective 1.0: Know different drawing instruments, equipment and materials used in technical
drawing.
1.1 Identify the different types of drawing Present the students all drawing Black
instruments, equipment and materials. instruments: board ruler
1.2 Outline the uses of the various instruments, a. Drawing set (1m)
equipment and materials. b. T-Square Black
1.3 State the precautions necessary to preserve c. Drawing board board Tee-
items 1.1 above. d. Set squares Square
1.4 Use each of the items in 1.1 above. e. Types of pencils Black
1 1.5 Maintain the various instruments and (H to B) board
equipment. f. Show to compass
demonstrate and Blackboard
explain the uses of protector
all of the above. Adjustable
set-square
60 set
square
78
PROGRAMME: NATIONAL DIPLOMA IN MECHANICAL ENGINEERING
General Objective 1.0: Know different drawing instruments, equipment and materials used in technical
drawing.
45 set
square
French
curve set
Templates
1
Duster
Chalk
Complete
drawing
table
2.1 Explain graphics and the different types of Ask the students to illustrate in a - do -
graphic present drawing the various types of lines
2.2 Illustrate the various convention present in based on BS 308 1972 Part 2. and
2 graphical productions of construction lines, finished assess.
lines, hidden and overhead details projections, Ask the students to set drawing
centre lines, break lines, dimensioning of plane, area on A1 paper with a title block
elevation and sections of objects. and the boarder lines and assess.
2.3 Layout of drawing sheets with the following (a) Ask students to illustrate technical
Margins (b) Title block etc. lettering in capital and small letters,
2.4 State the various standards of drawing sheets. using, free hand and using letter
2.5 Print letters and figures of various forms and stencils and assess.
3 characters. Ask students to identify the various
2.6 Illustrate conventional signs, symbols and standard sheets Ao -A4 and assess
appropriate lettering characters. Ask students to draw conventional
signs and symbols
and assess
79
PROGRAMME: NATIONAL DIPLOMA IN MECHANICAL ENGINEERING
General Objective: 3.0 Know the construction of simple geometrical figures and shapes.
3.1 Explain the purpose of geometrical construction Ask students to illustrate the
in drawing parallel. construction of simple geometrical
3.2 Construct parallel and perpendicular lines figures and shapes and assess
3.3 Construct and bisect lines, angles and areas Ask students to construct parallel
3.4 Divide a straight line into given number of equal and perpendicular lines and assess
parts. Ask students to construct and
bisect lines, angles and areas and
assess
Ask students to divide a straight
line into a graph number of equal
parts using the compasses and
assess
4
3.5 Identify polygons (regular or irregular) Ask students to different between
3.6 Construct regular polygons with N sides in a regular and irregular polygons and
given circle, given (a) distance across flats (b) assess
distance across corners Ask students to construct regular
3.7 Define a circle polygon with N side
3.8 Explain the properties of a circle, e.g. radius, and assess
diameter, normal, tangent, circumference etc. Ask students to differentiate
between regular and irregular
polygons and assess
Ask students to construct regular
polygon with N-sides
and assess
General Objective 4.0: Know the construction of simple geometrical figures and shapes.
4.1 Carry out simple geometrical constructions on Ask students to explain the various - do -
circles e.g. (a) diameter of a circle of a circle of a properties of a circle and assess
5 given circumference. (b) the circumference to a
circle of a given diameter (c) a circle to pass
through 3 points (d) a circle to pass through 2
80
PROGRAMME: NATIONAL DIPLOMA IN MECHANICAL ENGINEERING
General Objective 4.0: Know the construction of simple geometrical figures and shapes.
81
PROGRAMME: NATIONAL DIPLOMA IN MECHANICAL ENGINEERING
82
PROGRAMME: NATIONAL DIPLOMA IN MECHANICAL ENGINEERING
ASSESSMENT: The continuous assessments, tests and quizzes will be awarded 40%, while the
remaining 60% will be for the end of the Semester Examination Score.
83
Electrical Graphics
Objectives:
General Objective: Interpret and draw electrical and electronics diagrams using symbols and software.
1 - 3 1.1 Identify and draw electrical and electronic Try and obtain samples Chalkboards,
symbols for of all the components Textbooks, Templates,
4-5 a. Machines identified by the list to Drawing Materials and
b. Wiring diagrams with codes show the students and equipment, Computer
6-7 c. Switch gear, fuses, relays etc. circulate round the class. Systems.
d. Voltage sources and current Obtain copies of relevant
8-9 sources. drawings to give to
e. Semi-conductor devices. students for each section
10 - f. Integrated chips of the 74 of the course.
11 series
g. Resistors, Capacitors,
12 Inductors, Transformers.
1.2 Practice, read and interpret Electrical, Building
13 - and Electronic diagrams.
15 1.3 Distinguish between SYMBOLIC and
COMPONENT diagrams.
1.4 Practice, draw Symbolic Electrical circuits as
used in text books.
1.5 Practice drawing Building wiring diagrams
showing all components, wiring, conduits, switch
boxes, wall plugs.
1.6 Practise translating drawings of "Electrical
84
COURSE: ELECTRICAL GRAPHICS COURSE CODE: EEC111 CONTACT HOUR: 15
HRS LECTURE 45
HRS TUT.
General Objective: Interpret and draw electrical and electronics diagrams using symbols and software.
ASSESSMENT: The Practical class will be awarded 40% of the total score. The continuous
assessments, tests and quizzes will take 10% of the total score, while the remaining 50% will be for
the end of the semester examination score.
85
Electrical Installation of Building
EEC 129 ELECTRICAL INSTALLATION OF BUILDING YI/2ND SEM 1/0/2 HRS/WK
OUTCOMES:
Course: WORKSHOP EXERCISES ON ELECTRICAL Course Code: EEC 129 Contact Hours: 15
INSTALLATION OF BUILDING Hrs Lecture
General Objective: Draw and produce various installation diagrams for domestic, industrial and
commercial purposes.
1 1.1 Draw electrical/electronic graphical symbols The teacher should give Graphical
2-3 1.2 Draft various electrical/electronic schematic assignments to students symbol, charts,
4-5 diagrams and assess them drawing sets
6-7 1.3 Draft various electrical installation/wiring
8-9 diagrams
10 - 1.4 Draft architectural drawings of simple buildings
11 e.g. 3-bedroom flat etc
12 - 1.5 Produce elevation drawings for architectural
13 drawings
14 - 1.6 Draft electrical services for a residential building
15 e.g. 3-bedroom flat
1.7 Draft electrical supply for a 3-bedroom building
1.8 Draw the installation diagram for a single phase
and three-phase energy meters in domestic and
commercial/industrial premises.
Assessment: The Practical class will be awarded 40% of the total score. The continuous
assessments, test and quizzes will take 10% of the total score while the remaining 50 % will be for the
end of the semester examination score
86
Course: ELECTRICAL INSTALLATION OF BUILDING Course Code: EEC 129 Contact Hours: 15
hrs lecture
General Objective: 1.0 Understand the basic knowledge and skill in electrical installation of building
and systems.
Schematic and Wiring Diagrams The teacher should draft Drawing Instrument
2.1 Explain schematic and Wiring Diagrams various schematic diagram for and drawing boards.
3 2.2 State the merits and demerits of schematic electrical/electronic circuits Typical samples of
diagrams and panel to the students. architectural
2.3 Draft various schematic diagrams e.g Teacher to draft various drawings must be
Transistor circuits panel etc. wiring diagrams to students available in the Lab.
4 - 5 2.4 Explain wiring diagram and workshop.
2.5 State the merits and demerits of wiring
diagrams
2.6 Draft various wiring diagrams.
2.7 Explain methods of preventing hazards.
87
Course: ELECTRICAL INSTALLATION OF BUILDING Course Code: EEC 129 Contact Hours: 15
hrs lecture
General Objective: 1.0 Understand the basic knowledge and skill in electrical installation of building
and systems.
Sectional and Architectural Drawing Teacher to draft architectural Chalk and Board.
3.1 Explain architectural drawings and symbols drawings of simple building
3.2 Interpret architectural drawings e.g. 3-bedroom flat.
6 - 7 3.3 Draft architectural drawings of simple
buildings e.g 3 bedroom flat
3.4 Produce elevation drawings from
architectural drawings.
88
Course: ELECTRICAL INSTALLATION OF BUILDING Course Code: EEC 129 Contact Hours: 15
hrs lecture
General Objective: 1.0 Understand the basic knowledge and skill in electrical installation of building
and systems.
89
Course: ELECTRICAL INSTALLATION OF BUILDING Course Code: EEC 129 Contact Hours: 15
hrs lecture
General Objective: 1.0 Understand the basic knowledge and skill in electrical installation of building
and systems.
Assessment: The Practical class will be awarded 40% of the total score. The continuous
assessments, test and quizzes will take 10% of the total score while the remaining 50 % will be for the
end of the semester examination score
90
MEASUREMENT/INSTRUMENT COURSES
Electrical/Electronics Instrumentation I
EEC 126 ELECTRICAL/ELECTRONIC INSTRUMENTS I Y1/2 ND SEMESTER 1/0/3 HRS/WK
OUTCOME:
Course: ELECTRICAL/ELECTRONIC INSTRUMENTS Course Code: EEC 126 Contact Hours: 1/0/3
hrs
General Objective 1.0: Understand the basic knowledge and skill in measurement and measuring
instruments
1.1 List various types of Electrical and Electronic Ask students to identify the Chalkboard,
Measurement Instruments: items in section 1.1 Textbooks, Measuring
a. Moving iron Instruments
b. Moving Coil
c. Voltmeter
d. Ammeter
e. Cathode ray Oscilloscope
(C.R.O.)
f. Megger
1-2 g. Wheatstone bridge
h. Wattmeter
i. Digital Voltmeter
j. Frequency Counters
k. Clip ammeter etc.
1.2 Identify the instruments listed in 1.1 above
1.3 State the applications of the instruments
listed in 1.1 above
1.4 State the range of type of each where
necessary.
91
Course: ELECTRICAL/ELECTRONIC INSTRUMENTS Course Code: EEC 126 Contact Hours: 1/0/3
hrs
General Objective 1.0: Understand the basic knowledge and skill in measurement and measuring
instruments
2.1 State different types of errors State the types of errors in -do-
a. Random practical examples
b. Systematic
3-4 c. Static
2.2 Define the errors Stated in 2.1 above.
2.3 Give practical examples of the errors stated in
2.1 above.
3.1 Sketch the permanent magnet moving Coil Illustrate the operating -do-
Instrument principle with diagram(s)
3.2 Explain the operation of moving Coil
Instrument
3.3 Show how the moving Coil Instrument can be
used as
a. Ammeter and
b. Voltmeter.
5-7
3.4 Show how a multiplier and Shunt can be used
to increase the range of Voltmeter and ammeter
respectively.
3.5 Calculate the Values of the multiplier and
shunt.
3.6 Calibrate a moving Coil Instrument. 3.7
Measure Voltage and Current by connecting
Multiplier and Shunt respectively.
4.1 Draw a block diagram of the following Digital Give the essential features -do-
Meters: of Digital Instrument
a. Digital Voltmeter
b. Frequency Counter
8 - 10 4.2 Explain the operation of the instruments in 4.1
above.
4.3 Use DVM to measure Voltage
4.4 Use Frequency Counter to measure
frequencies up to 100KHz
92
Course: ELECTRICAL/ELECTRONIC INSTRUMENTS Course Code: EEC 126 Contact Hours: 1/0/3
hrs
General Objective 1.0: Understand the basic knowledge and skill in measurement and measuring
instruments
5.1 List various types of bridge Circuit Ask students to explain the -do-
a. Wheat Stone, operation and applications
b. Capacitance of bridge circuits
c. Inductance.
5.2 State the industrial applications of the bridges
11 -
listed in 5.1 above.
13
5.3 Explain the operation of the bridge circuits
listed in 5.1 above.
5.4 Explain the operation of a null detector
5.5 Use Wheatstone bridge to measure
resistance.
6.1 Sketch the diagram of Ohmmeter and Megger Ask students to state the -do-
6.2 Describe the Construction and Operation of differences Ohmmeter and
the instruments in 6.1 above Megger
14 -
6.3 Identify an earth point
15
6.4 Use Megger to Measure the following:
a. Earth resistance and
b. Insulation resistance.
Assessment: The practical class will be awarded 40% of the total score. The continuous
assessments, test and quizzes will take 10% of the total score, while the remaining 50% will be for the
end of the semester examination score
93
Course: ELECTRICAL/ELECTRONIC Course Code: EEC 126 Contact Hours: 45 hrs
INSTRUMENTS I Practical
General Objective 1.0 Utilize and measure electrical quantities with electrical/electronic instruments
1.1 Demonstrate ohm's law using Ask students to verify ohm's e.m.f sources, variable and
variable resistance law fixed resistances, cables,
1-2
1.2 Demonstrate ohm's law using voltmeter, ammeter
variable e.m.f
3.1 Demonstrate charging and The teacher should assist to Capacitors, inductor, e.m.f
discharging of capacitors charge and discharge the circuit sources, voltmeter and
6-7
3.2 Demonstrate charging and elements ammeter
discharging of inductors
4.1 Calibrate and measure with The teacher should Moving coil instrument,
moving coil instruments demonstrate the process of moving iron instrument,
8 - 10
4.2 Calibrate and measure with calibration with the students drawing sets
moving iron instrument
5.1 Determine the resistance using Ask students to comment Wheatstone bridge and other
wheatstone bridge bridge circuit bridge circuits
5.2 Demonstrate bridge circuits to
11 -
measure
13
a. inductance
b. capacitance
c. frequency
6.1 Measure d.c voltage in Involve the students in the A.C and d.c voltmeters
experiments using moving coil measurement using suitable
14 - instrument instruments
15 6.2 Measure a.c voltage in
experiments using suitable
instruments
94
Course: ELECTRICAL/ELECTRONIC Course Code: EEC 126 Contact Hours: 45 hrs
INSTRUMENTS I Practical
General Objective 1.0 Utilize and measure electrical quantities with electrical/electronic instruments
Assessment: The practical class will be awarded 40% of the total score. The continuous
assessments, test and quizzes will take 10% of the total score, while the remaining 50% will be for the
end of the semester examination score
95
Electrical/Electronics Instrumentation II
OUTCOMES:
General Objective : Acquaint the students with operation and application of electrical/electronic
instruments for laboratory and industrial measurements
1.1 Draw the block diagram of CRO Ask the students to draw and Chalk, Board,
1.2 Explain the function of each block explain the functions of CRO's block Textbooks, Cathode
1.3 Draw the diagram of Cathode Ray diagram ray tube, wattmeter
Tube (CRT)
1.4 Explain the operation of C.R.T.
a. CRT Vertical and
horizontal amplifiers
b. Time base,
1-4
c. Triggering
d. Sweep generator
1.5 Measure D.C. Voltage with C.R.O.
1.6 Measure the following a/c.
parameters using C.R.O:
a. Amplitude
b. Phase and
c. Frequency
96
Course: ELECTRICAL/ELECTRONIC Course Code: EEC 236 Contact Hours: 1/0/2
INSTRUMENTS II hrs
General Objective : Acquaint the students with operation and application of electrical/electronic
instruments for laboratory and industrial measurements
3.1 Explain the importance of the Ask the students to explain the Chalk and board
following factors in selecting fabric in selecting measurement
measurement instruments: instruments
a. Range
9 - 10 b. Accuracy
c. Response
d. Stability
e. Reliability
f. Sensitivity
97
Course: ELECTRICAL/ELECTRONIC Course Code: EEC 236 Contact Hours: 1/0/2
INSTRUMENTS II hrs
General Objective : Acquaint the students with operation and application of electrical/electronic
instruments for laboratory and industrial measurements
Assessment: The practical class will be awarded 40% of the total score. The continuous
assessments, test and quizzes will take 10% of the total score, while the remaining 50% will be for the
end of the semester examination score
Course: ELECTRICAL/ELECTRONIC Course Code: EEC 236 Contact Hours: 30hrs Practicals
INSTRUMENTS II
General Objective : Apply the electrical/electronic instruments for measuring electrical and physical
quantities
1.1 Measurement of d.c voltage in Ask students to take CRO, signal generator, d.c/a.c
experiments using CRO measurements during power supplies, probe
1.2 Measurement of a.c voltage in experiments
experiments using CRO
1-5
1.3 Measurement of range of
frequencies with CRO
1.4 Measurement of phase angles
with CRO
2.1 Carry out experiment on d.c The teacher should involve Wattmeter, power supplies,
power measurement the students in power single and three phase circuits
2.2 Perform experiment on a.c power measurement
measurement in single phase circuit
6-9 2.3 Carry out experiment on a.c
power measurement in three phase
circuit
2.4 Perform experiment on power
factor measurement
98
Course: ELECTRICAL/ELECTRONIC Course Code: EEC 236 Contact Hours: 30hrs Practicals
INSTRUMENTS II
General Objective : Apply the electrical/electronic instruments for measuring electrical and physical
quantities
diode
10 -
3.3 Measure temperature range using
15
digital thermometer
Assessment: The practical class will be awarded 40% of the total score. The continuous
assessments, test and quizzes will take 10% of the total score, while the remaining 50% will be for the
end of the semester examination score
99
ELECTRICAL ENGINEERING COURSES
Electric Power I
EEC 122 ELECTRICAL POWER I Y1/2nd SEM 1/0/2 HRS/WK
OUTCOMES
Course: ELECTRICAL POWER I Course Code: EEC 122 Contact Hours: 15hrs
Lecture; 30hrs Practicals
1.1 Describe with the aid of lay out Instructor should use photographs Chalk, board,
diagrams the operation of; extensively in describing some textbooks, industrial
a. Steam plant installations. visits, samples of the
b. Diesel plant A site visit would also help in getting available equipment and
c. Gas plant a realistic impression of the materials
1-3 d. Solar and wind generators/alternator set.
plant.
1.2 Be able to draw a general layout
for generation transmission and
distribution of electrical power
systems.
100
Course: ELECTRICAL POWER I Course Code: EEC 122 Contact Hours: 15hrs
Lecture; 30hrs Practicals
sizes.
1.8 Describe the construction of
underground cables.
1.9 Solve problems involving simple
short transmission lines.
2.1 Explain the difference between Give the students the problem of
distributors and feeders estimating the power Consumption of
2.2 Solve problems involving your local town.
7 - 9 voltage drops in simple distribution Try to identify what protection
systems. devices exist in your home town.
Arrange a visit to your local
distribution station.
General Objective: 3.0 Understand the basic principles of protection in power systems.
3.1 Describe the component parts of Get students to write short reports
a fuse on such visit.
3.2 Explain the purpose of a fuse Show samples of different insulators
3.3 Define fusing currents, current obtained from your local electricity
rating and fusing factor. workshop.
10 - 3.4 Describe the moulded case of a
13 circuit breaker
3.5 Define the interruption capacity
of a circuit breaker
3.6 Define an isolator
3.7 Explain the difference between a
circuit breaker and an isolator
101
Course: ELECTRICAL POWER I Course Code: EEC 122 Contact Hours: 15hrs
Lecture; 30hrs Practicals
Assessment: The practical class will be awarded 40% of the total score. The continuous assessments,
test and quizzes will take 10% of the total score, while the remaining 50% will be for the end of the
semester examination score
102
Electric Power II
ELECTRICAL POWER II EEC 232 Y2/3RD SEMESTER 1/0/2 HRS/WK
Course Specification ELECTRICAL POWER II Course Code: EEC 232 Contact Hours: 15hrs
Theoretical Content and Practical (Industrial lecture 30hrs practicals
Visits)
General Objective: Understand the transmission lines and cable with their performances
1.1 Describe with the aid of diagrams the A site visit will be required to Chalk, board, textbooks,
following: understand layout diagram of industrial visits, samples of
a. hydro electricity power system available equipment and
generation A plan of the Nigerian Grid materials
b. Nuclear generation would assist the students to
c. MHD generation comprehend the national grid
1.2 Explain factors affecting the choice system
of site for items in 1.1 Give the students the
1.3 Explain the advantages and problem of estimating the load
disadvantages of power plant in 1.1 factor, peak and load demand
1.4 Draw a typical layout diagram for a
1 - 5 power system.
1.5 Identify major items in a power
system layout.
1.6 Describe the National Electric Power
Grid system as applicable to National
Electricity Power Authority (NEPA).
1.7 Identify the types of generators that
are commonly used for peak and base
loads.
1.8 Solve problems on load factor, peak
and base load costs per unit.
1.9 Draw typical load curves
2.1 Describe various types of poles, pole Teachers should describe the -do-
6 - 10 supports towers and state their uses. poles, towers, conductors,
2.2 Explain the line surveying and route underground cables
103
Course Specification ELECTRICAL POWER II Course Code: EEC 232 Contact Hours: 15hrs
Theoretical Content and Practical (Industrial lecture 30hrs practicals
Visits)
General Objective: Understand the transmission lines and cable with their performances
3.1 Explain the principles of modelling of Ask the students to model -do-
transmission lines (short and Medium transmission lines.
lines) Solve problems involving per
3.2 Explain the concept of per unit unit system
11 - system. Give problems involving
15 3.3 Derive expressions for per unit phasor and appropriate
power, voltage, current and impedance equivalent diagrams of
3.4 Solve problems involving per unit in transmission network
3.3.
3.5 Define voltage at the sending and
104
Course Specification ELECTRICAL POWER II Course Code: EEC 232 Contact Hours: 15hrs
Theoretical Content and Practical (Industrial lecture 30hrs practicals
Visits)
General Objective: Understand the transmission lines and cable with their performances
Assessment: The practical class will be awarded 40% of the total score. The continuous assessments,
test and quizzes will take 10% of the total score, while the remaining 50% will be for the end of the
semester examination score
105
Electric Power III
ELECTRICAL POWER III EEC 242 Y2/4TH SEMESTER 1/0/2HRS/WK
General Objectives
Course ELECTRICAL POWER III Course Course Code: EEC 242 Contact Hours: 15hrs
Specification: Theoretical Content lecture
General Objective: Understand the performance of load flow and fault analysis of interconnected
power systems
1.1 Discuss interconnected power The teacher should indicate the Chalk, board, digital
systems essence of load flow analysis to computer, samples of
1.2 State the advantages and power systems application software on
disadvantages of interconnected power Ask the students to solve load flow analysis
systems problems on load flow analysis
1.3 Construct the power circle diagram. Show how digital computer can
1.4 Describe the techniques for reducing be applied to this analysis
interconnected systems to simple Give written computer program
equivalent diagrams. to perform load flow analysis
1.5 Solve problems involving 1 - 4 above
1.6 Explain the need for load flow
1-4
studies.
1.7 Explain the advantages and
disadvantages of load flow studies.
1.8 Formulate the nodal admittance
matrices for various net work.
1.9 State the various variables (P, Q, S,
V and ) affecting the load flow in power
system next work.
1.10 Classify the variables in 1.8 into
control independent and dependent
variables.
106
Course ELECTRICAL POWER III Course Course Code: EEC 242 Contact Hours: 15hrs
Specification: Theoretical Content lecture
General Objective: Understand the performance of load flow and fault analysis of interconnected
power systems
2.1 Describe various types of faults that The teacher should be able to Chalk,, board and
can occur on generators transformers describe different types of faults Textbooks
and transmission lines. on generators, transformers and
2.2 Explain short circuit, open circuit and transmission lines
earth faults on transmission lines. Help the students to determine
2.3 Define transient and sub-transient fault levels on typical power
reactances. systems
2.4 Explain sub-transient and transient
reactances using the appropriate wave
form of a faulted generator.
6-9
2.5 Draw typical wave forms of short
circuit currents in power systems.
2.6 Explain a symmetrical fault.
2.7 Solve symmetrical fault problems
using one line diagram and the per unit
system method.
2.8 Derive expressions for the
symmetrical components for positive,
negative and zero sequence in terms of
the line values.
107
Course ELECTRICAL POWER III Course Course Code: EEC 242 Contact Hours: 15hrs
Specification: Theoretical Content lecture
General Objective: Understand the performance of load flow and fault analysis of interconnected
power systems
108
Course ELECTRICAL POWER III Course Course Code: EEC 242 Contact Hours: 15hrs
Specification: Theoretical Content lecture
General Objective: Understand the performance of load flow and fault analysis of interconnected
power systems
3.1 Describe corona effect and the Ask the students to identify the Chalk, boards,
factors affecting it. causes of over-voltage in power textbooks
3.2 Derive an expression for the systems
disruptive critical voltages for an Derive expressions for the
overhead line. characteristics of transmission
3.3 Explain the causes of over voltage in line
power systems.
3.4 Draw a typical surge wave-form.
3.5 State the possible effects of a
travelling wave on transmission line.
3.6 Derive an equation for surge velocity
in a uniform transmission line.
3.7 Use the expression in 3.6 to solve
involving surge velocity in a
a. Single phase line
6-9 b. Three phase line
c. Single - phase
concentric cable.
3.8 Derive an expression for surge
impedance (Zo)
3.9 Explain different types of
terminations
3.10 Derive an expression for reflected
surge voltage and current.
3.11 Define
a. Reflecting factor
coefficient (p)
b. Transmission factor
coefficient (t)
3.12 Solve problems involving 3.8, 3.10
and 3.11.
109
Course ELECTRICAL POWER III Course Course Code: EEC 242 Contact Hours: 15hrs
Specification: Theoretical Content lecture
General Objective: Understand the performance of load flow and fault analysis of interconnected
power systems
3.17 Solve problems involving reflected The teachers should describe Chalk, board, textbooks
voltages and currents surges in 3.16. various overload insulators
10 - 3.18 Explain various types of overhead including their application, testing
15 line insulators and their applications. and efficiency
3.19 Describe various types of overhead
insulators and state their applications.
3.20 Describe various methods of testing
insulators.
3.21 Derive expressions for voltage
distribution and efficiency across an
insulating string (string efficiency).
3.22 Solve problems on voltage
distribution and string efficiency using the
expressions in 3.21.
3.23 Describe insulation co-ordination in
overhead lines.
3.24 Explain the principles of operation
of an impulse generator
Assessment: The practical class will be awarded 40% of the total score. The continuous assessments,
test and quizzes will take 10% of the total score, while the remaining 50% will be for the end of the
semester examination score
110
Course: ELECTRICAL POWER III Course Code: EEC 242 Contact Hours: 30hrs Practicals
1.1 Determine the sending and Ask students to carryout Transmission line model,
receiving end voltage of the line the practical as ammeter, voltmeter and
1-4
1.2 Determine the voltage regulation demonstrated wattmeter
and transmission efficiency
Assessment: The practical class will be awarded 40% of the total score. The continuous
assessments, test and quizzes will take 10% of the total score, while the remaining 50% will be for the
end of the semester examination score
111
Electric Machines I
EEC 122- ELECTRICAL MACHINE 1 Y1/2ND SEMESTER 1/0/2HRS/WK
OUTCOMES:
Course: ELECTRICAL MACHINE I Course Code: EEC 123 Contact Hours: 15 hrs
Lecture
General Objective : Understand the construction and principle of operation of d.c, a.c machines and
transformers
1. Describe, with the aid of a labelled The teacher should give the Chalk, board,
diagram, the construction of a dc motor. detail construction of d.c machines textbooks, d.c machines
1.2 State materials used in the Ask the students to solve
Construction of various parts dc problems on d.c machines
machines. Explain the conditions for parallel
1.3 State the functions of armature operation of d.c machines
windings and field windings
1.4 Show the student a typical lap &
wave winding of a dc machine
1.5 Differentiate between lap and wave
1 - 5 windings
1.6 Draw diagrams of Lap and wave
windings
1.7 Derive emf equation of dc machine
1.8 Solve problems involving 1.4 and 1.6
1.9 State factors that affect the emf
equations
1.10 Derive the equation V=E+Ia Ra (for
a motor) Or E = V + IR (for a generator)
1.11 Explain, with the aid of developed
diagram, armature reaction and methods
112
Course: ELECTRICAL MACHINE I Course Code: EEC 123 Contact Hours: 15 hrs
Lecture
General Objective : Understand the construction and principle of operation of d.c, a.c machines and
transformers
of minimising it.
1.12 Stop circuit representations of dc
machines and calculate current and
voltage drop.
1.13 Explain Concept of back emf.
1.14 Explain the need for Starters for a
dc motor.
1 - 5 1.15 Describe different Starters for dc
motors.
1.16 Derive the condition for maximum
efficiency of dc machine.
1.17 State conditions for parallel
operation of dc machines.
1.18 Solve problems involving 1.15 to
1.17
2.1 Describe with Labelled diagrams the The teacher should ensure that Chalk, board,
construction and principles of operation the construction and operation of textbooks, single and
of Single phase transformer transformer is illustrated with three phase
2.2 List different types of cores used in diagrams transformers
transformer construction Ask the students to solve
2.3 Explain with the aid of phasor problems associated with single
diagrams the action of a transformer on phase and three phase
load and on no-load transformers
2.4 Derive transformation equations of a
6 - 10 transformer.
2.5 Draw an equivalent circuit for a
transformer
2.6 Describe with the aid of an
equivalent circuit, a practical
transformer.
2.7 Determine the equivalent circuit of a
transformer with parameters referred to
the primary or secondary.
2.8 List standard terminal markings for a
113
Course: ELECTRICAL MACHINE I Course Code: EEC 123 Contact Hours: 15 hrs
Lecture
General Objective : Understand the construction and principle of operation of d.c, a.c machines and
transformers
3.1 Discuss how rotating field are The teacher should discuss the Chalk, board,
produced and how polyphase machines principles of operation of induction textbooks and a.c
are constructed (use diagrams and synchronous machine machines
3.2 Differentiate between synchronous Give simple problems involving
and Induction machines. a.c machines
3.3 Describe the Component parts of a
3-phase Induction motor (Squirrel cage
and wound type)
11 -
3.4 Explain the principles of operation of
15
Induction machine.
3.5 Define Synchronous speed and slip.
3.6 Solve problems relating to 3.4 and
3.5
3.7 List the component parts of an
Alternator
3.8 Derive the e.m.f equations of an
Alternator
114
Course: ELECTRICAL MACHINE I Course Code: EEC 123 Contact Hours: 15 hrs
Lecture
General Objective : Understand the construction and principle of operation of d.c, a.c machines and
transformers
Assessment: The practical class will be awarded 40% of the total score. The continuous assessments,
test and quizzes will take 10% of the total score, while the remaining 50% will be for the end of the
semester examination score
115
Electric Machines II
Course: ELECTRICAL MACHINES II Course Code: ECC 233 Contact Hours: 15
Hrs Lectures
1.1 State the principles of induction, Explain with diagrams the principle Chalkboard,
interaction and alignment as applied to and operation of inductions motors. Chalk, textbooks,
electrical machines. Take students to the machine electrical machines
1-2
1.2 Explain with the aid of sketches how laboratory and show them the
the principles are applied to electrical construction of an electrical motors.
machines.
General Objective 2.0: Understand the the principles of electro-mechanical energy conversion
2.1 State the major energy conversion Explain to the students, the principles -do-
principles. of synchronous machines.
2.2 Derive the general energy balance Indicate the types of synchronous
equation applicable to all situations. machines.
2.3 Represent by suitable block Explain the basic difference between
diagrams the energy balance equation. motors and generator
2.4 Derive induced voltage and electrical Take students to the machine
energy input in singly excited systems. laboratory to see practical generators.
2.5 Derive the energy in the magnetic Demonstrate the difference between
field of a singly excited system. the types of generators by diagram.
3 - 8 2.6 Derive the mechanical force in the
system in 2.5 above.
2.7 Derive energy balance equation.
2.8 Develop the dynamic equation of
singly excited electro-mechanical
system.
2.9 Solve problems involving 2.2 to 2.7
above.
2.10 Perform an experiment to show the
conversion of energy in singly excited
systems.
116
Course: ELECTRICAL MACHINES II Course Code: ECC 233 Contact Hours: 15
Hrs Lectures
General Objective 3.0: Know the principles of operation and construction of transformers
3.1 Explain the working principle of the Explain to the student the working - do -
franformers. principle, types and equivalent circuit
3.2 Develop the emf equation of a of transformers.
transformer. Solve problems on transformer
3.3 Describe the different types of Teachers should demonstrate
transformer cores and windings. possible arrangements of the
3.4 Explain resultant flux, magntizing transformer windings to provide single
inductance, leakage fluxes and leakage phase and poly-phase transformer.
inductances. Give the detail of parallel operation of
3.5 Explain the phasor diagrams for three-phase transformer
transformer on no-load and on-load.
3.6 Explain the equivalent circuit of a
transformer.
3.7 Identify the limitations of the
equivalent circuit and the approximate
equivalent circuit.
3.8 Use the open-circuit test and the
9 - 10
short-circuit test to determine the
equivalent circuit parameters.
3.9 Describe methods of testing
transformers namely:
3.10 Connect three single phase
transformers for three phase operation
(i.e. Star/Star, Star/Delta)
3.11 Show with the aid of sketches the
possible arrangement of three
transformer windings.
3.12 Group transformers into their vector
groups
3.13 Explain the use of each group and
their advantages.
3.14 Explain the purpose of the tertiary
windings in three phase transformers.
3.15 Explain the parallel operation of
117
Course: ELECTRICAL MACHINES II Course Code: ECC 233 Contact Hours: 15
Hrs Lectures
General Objective 3.0: Know the principles of operation and construction of transformers
Assessment: The practical class will be awarded 40% of the total score. The continuous assessments,
test and quizzes will take 10% of the total score, while the remaining 50% will be for the end of the
semester examination score
118
Course: ELECTRICAL MACHINES II Course Code: ECC 233 Contact Hours: 30 hrs - Practicals
1.1 Perform experiment on open Teacher should assist Transformers (single and three
circuit characteristics of a single the students when phase), a.c machines, starters,
phase transformer carrying out experiment voltmeter, ammeter, tachometer, phase
1.2 Perform experiment on open sequence meter
circuit characteristics of three
phase transformer
1.3 Carryout experiment on close
1 - 19 circuit characteristics of a single
phase transformer
1.4 Perform experiment on close
circuit characteristics of three
phase transformer
1.5 Perform experiment on
identifying polarity of a 3-phase
transformer
Assessment: The practical class will be awarded 40% of the total score. The continuous assessment,
tests and quizzes will be 10% of the total score, while the remaining 50% will be for the end of the
semester score
119
Electrical Engineering Science I
EEC 115 ELECTRICAL ENGINEERING SCIENCE I Y1/1ST SEMESTER 1/0/2 HRS/WK
OUTCOMES:
1.1 Define an atom Draw atomic structure to explain to the Chalk Board,
1.2 Explain the structure and composition student its composition. Chalk,
of an atom Explain the electron mobility Textbook,
1.3 Differentiate between conductors, Draw the atomic structure to explain the Charts
insulators and semi-conductors. unique differences in their structure.
1.4 Explain the concepts of current and Explain with the aid of diagrams how the
1 - 3 electron flow current & electron flow.
1.5 Define electric current, potential Write down the formulae and symbols for
difference electromotive force (e.m.f) and current flow, p.d. or e.m.f., resistance.
resistance, state their units and symbols. Explain them to the students.
1.6 State multiples and sub-multiples of Explain quantities of electricity and their
Electric quantities; (e.g. Mega 106, kilo- units.
103, etc)
120
PROGRAMME: ND IN ELECTRICAL/ELECTRONIC ENGINEERING TECHNIQUES
2.6 Solve problems using Ohm's law Give some circuit with resistive
2.7 Define resistivity and conductivity of a components.
conductor. Verify Ohms laws.
2.8 State the relationship between Explain how to obtain resistivity and
resistance of a conductor, its resistivity, conductivity from the formula R =1/a
length and area.
4-6
2.9 Differentiate between series and
parallel circuits.
2.10 Solve problems involving resistivity
and conductivity
2.11 Deduce the equivalent resistance of
series and parallel circuits.
2.12 Explain Kirchoff's laws. Explain how to obtain resistivity from the
2.13 Verify by experiment the Kirchoff's formula R =1/a
laws. Draw the circuit diagrams for series and
2.14 Explain the Superposition Principles parallel connections.
2.15 Solve problems involving series and Explain the differences between the
parallel circuits using Kirchoff's laws and Kirchoff's laws and superposition
superposition principles. principles. Give examples.
2.16 Define temperature coefficient of Explain the relationship between the
7 - 9 resistance temperature and resistance of a wire.
2.17 Use the expression for resistance at Show how to calculate a change in
temperature Tk and to calculate change resistance when the temp changes.
in resistance. Explain why there is a temperature
2.18 See from 2.18 the change in change when the current flows through a
resistance due to change in temperature wire.
2.20 Solve problems involving effect of Show a typical graph of resistance
temperature on resistance against temperature
Solve problems
121
PROGRAMME: ND IN ELECTRICAL/ELECTRONIC ENGINEERING TECHNIQUES
General Objective 3.0: Understand various types of energy and their inter-relationships
3.1 Explain various types of energy Explain the sources of various energy
3.2 Explain the relationship between generations.
electrical, mechanical and thermal Show how they are related to electrical
10 - energy. energy
12 3.3 State 5.1 units of various types of Explain their units.
energy in 3.2 Solve problems
3.4 State Joule's law
3.5 Solve problems involving Joule's law
General Objective 4.0: Understand the concept of electrostatics, electric charge and capacitance of
capacitors.
122
PROGRAMME: ND IN ELECTRICAL/ELECTRONIC ENGINEERING TECHNIQUES
General Objective 4.0: Understand the concept of electrostatics, electric charge and capacitance of
capacitors.
Assessment: The practical class will be awarded 40% of the total score. The continuous assessments,
test and quizzes will take 10% of the total score, while the remaining 50% will be for the end of the
semester examination score
123
PROGRAMME: ND IN ELECTRICAL/ELECTRONIC ENGINEERING TECHNIQUES
Course: ELECTRICAL Course Code: EEC 115 Contact Hours: 30 Hrs Practical
ENGINEERING SCIENCE I
General Objective 1.0: Perform experiments on d.c circuits to understand electrical quantities.
Assessment: The practical class will be awarded 40% of the total score. The continuous assessments,
test and quizzes will take 10% of the total score, while the remaining 50% will be for the end of the
semester examination score
124
Electrical Engineering Science II
PROGRAMME: ND IN ELECTRICAL/ELECTRONIC ENGINEERING TECHNOLOGY
Course: ELECTRICAL ENGINEERING SCIENCE Course Code: EEC 125 Contact Hours: 15
II HRS Lecture
General Objective: 1.0 Understand the concept of magnetism and magnetic circuits.
1.1 Define magnetic flux, magnetic flux State the general concept of Chalk Board,
density magnetic motive force, magnetic magnetism and electromagnetism textbooks, coil of
field strength, reluctance, permeability of The teacher is to derive conductor, magnetic
free space (magnetic constants), relative formulae for field strength force materials, magnet.
permeability. etc.
1.2 State the symbols, units and Show analogies between
relationships of terms in 1.1 electrical and magnetic circuits.
1-3
1.3 Draw the electrical equivalent of a Solve problems in the class.
magnetic circuit, with or without air-gap.
1.4 State analogies between electrical and
magnetic circuits.
1.5 Solve simple magnetic circuit problems
1.6 Distinguish between soft and hard
magnetic materials.
General Objective: 2.0 Understand the concept of electromagnetism and electromagnetic induction
2.1 Explain the magnetic affect of electric The teacher to show right hand -do-
current rule and explain the concept of
2.2 Draw magnetic fields around straight electric field and electromagnetic
conductors, adjacent parallel conductors Induction.
and solenoids.
2.3 Explain the force on a current carrying
conductor in a magnetic field.
2.4 State the direction of the force in 2.4
4-8
2.5 Derive the expression for the magnitude
of the force in 2.4 (i.e. F = BIL Newton)
2.6 Explain the concept of electromagnetic
induction
2.7 State Faraday's Laws of electromagnetic
induction
2.8 State Lenz's law of electromagnetic
induction
125
PROGRAMME: ND IN ELECTRICAL/ELECTRONIC ENGINEERING TECHNOLOGY
Course: ELECTRICAL ENGINEERING SCIENCE Course Code: EEC 125 Contact Hours: 15
II HRS Lecture
General Objective: 2.0 Understand the concept of electromagnetism and electromagnetic induction
General Objective: 3.0 Understand the concept of inductance and its applications
3.1 Define self and mutual inductance Explain mutual inductance and -do-
3.2 State the symbols and units of the terms how to calculate various
in 3.1 above parameters.
3.3 State the expression for the equivalent Show with examples how
inductance of inductances connected in energy stored is.
series and in parallel
3.4 State the expression for the induced
voltage across an inductor
9 - 11 3.5 State the expression for inductance in
coupled coils connected in series aiding or
opposing.
3.6 Derive an expression for energy stored
in an inductor
3.7 Solve problem involving 3.3 to 3.6
3.8 Describe using suitable diagram, the
operation of the induction coiled in a car
ignition system
4.1 Describe the production of an alternating The teacher should explain in -do-
e.m.f. by a rotating coil in a magnetic field. detail the theory of alternating
12 -
4.2 Sketch a.c. waveforms both to scale and current and voltage.
15
not to scale. Solve problems on a.c circuits.
4.3 Define r.m.s, instantaneous, average,
126
PROGRAMME: ND IN ELECTRICAL/ELECTRONIC ENGINEERING TECHNOLOGY
Course: ELECTRICAL ENGINEERING SCIENCE Course Code: EEC 125 Contact Hours: 15
II HRS Lecture
Assessment: The practical class will be awarded 40% of the total score. The continuous assessments,
test and quizzes will take 10% of the total score, while the remaining 50% will be for the end of the
semester examination score
127
Course: ELECTRICAL ENGINEERING Course Code: EEC 125 Contact Hours: 30 HRS
SCIENCE II PRACTICAL
General Objective 1.0: Understand through experiments the a.c fundamentals and circuits
1.1 Determine by experiment the B-H Ask students to perform Magnet, inductors, voltmeter,
curve for magnetic material the experiments with ammeter, flux meter
(Hysterisis curve) minimum error
1.2 Perform experiment on a
magnetic energy loss in a magnetic
1-5
material
1.3 Verify by experiment faraday's law
of electromagnetic induction
1.4 Perform experiment on Lenz's law
of electromagnetic induction
Assessment: The practical class will be awarded 40% of the total score. The continuous
assessments, test and quizzes will take 10% of the total score, while the remaining 50% will be for the
end of the semester examination score
128
Electric Circuit Theory I
EEC 239 ELECTRIC CIRCUIT THEORY I Y2/3 SEMESTER 1/0/2 HRS/ WEEK
OUTCOMES:
1. Understand a.c theory and apply it to the solution of simple electrical circuits.
2. Understand mesh and nodal analysis and their applications in solving electrical circuits
problems
3. Understand and apply network transformation and duality principles
4. Understand network theorems and their applications to d.c and a.c circuits
Course: ELECTRICAL CIRCUIT THEORY I Course Code: EEC 239 Contact Hours:
1/0/2 HRS/WK
General Objective: Understand a.c theory and apply it to the solution of simple electrical circuits
1.1 State different mathematical forms of Teacher should explain the a.c Chalk, board,
representing a.c signals eg. Trigonometry, polar theory with respect to serial and textbooks, charts,
and j-notation. parallel circuit calculator
1.2 Convert a.c signal in polar form to the j- Solve many problems involving
notation. a.c theory and circuits
1.3 Subtract, add, multiply and divide phasor
using j-operator
1.4 Solve simple problems using j-notation
1.5 Draw to scale phasor diagrams for a.c
circuits
1 - 4 1.6 Show with the aid of phasor diagrams that
the current in a capacitor circuit leads voltage
and the current in the inductive circuit lags the
voltage
1.7 Distinguish between inductive and capacitive
reactances
1.8 Draw voltage and current wave forms on
same axis to show lagging and leading angles
1.9 Draw the phasor diagrams for series and
parallel a.c circuits
1.10 Calculate voltage, current, power and
129
Course: ELECTRICAL CIRCUIT THEORY I Course Code: EEC 239 Contact Hours:
1/0/2 HRS/WK
General Objective: Understand a.c theory and apply it to the solution of simple electrical circuits
2.1 Explain the following terms used in electric Ask students to solve and -do-
network: analysis nodal/mesh network
a. ideal and practical circuits
independent current and voltage
series
b. branch
c. node
5-7
d. loop
e. Network
2.2 Explain the basic principle of mesh circuit
analysis.
2.3 Solve problem on items listed in 3.2 above
2.4 Explain the basic principle of nodal analysis
2.5 Solve problem on 3.4
3.1 Reduce a complex network to its series or Solve network problems with
parallel equivalent duality principle
8 - 11 3.2 Identify star and delta networks
3.3 Derive the formula for the transformation of a
delta to a star network and vice versa
130
Course: ELECTRICAL CIRCUIT THEORY I Course Code: EEC 239 Contact Hours:
1/0/2 HRS/WK
General Objective: Understand a.c theory and apply it to the solution of simple electrical circuits
Assessment: The continuous assessment, quizzes and tests will be awarded 40% of the local score,
while the remaining 60% will be for the end of the semester examination
131
Electric Circuit Theory II
EEC 249 ELECTRIC CIRCUIT THEORY II Y2/4TH SEMESTER 1/0/2 HRS/WEEK
OUTCOMES:
Course: ELECTRIC CIRCUIT THEORY II Course Code: EEC 249 Contact Hours: 30
HOURS
General Objective 1.0: Understand the principle of power calculation in a.c. circuits
1.1 Calculate power in A.C. circuits Show how to calculate Chalk, board,
containing: a. Power from a.c. textbooks, charts
a. Resistance; circuit and calculator
b. Inductance; b. Explain various
c. Capacitance; ways to get a.c.
d. Combinations of (i.) - (iii) parameters.
1.2 Explain power factor and factors c. Discuss the use of
affecting its value 3 phase a.c. power.
1 - 3 1.3 Explain the following: d. Show how to
a. Apparent power; calculate various
b. Reactive power; parameters in
c. Active power. frequency domain.
1.4 Explain methods of power factor e. Ecplain coupling.
correction
1.5 Solve problems on power factor, active
power, apparent power, reactive power and
power factor correction.
132
PROGRAMME: ND IN ELECTRICAL/ELECTRONIC ENGINEERING TECHNOLOGY
Course: ELECTRIC CIRCUIT THEORY II Course Code: EEC 249 Contact Hours: 30
HOURS
General Objective 2.0: Understand the basic principles involved in three-phase systems and their
applications.
2.1 Define polyphase system Ask the students to identify single -do-
2.2 Explain the basic difference between phase, three-phase (star and delta)
single phase and three-phase systems. systems
2.3 Explain the phase sequence of a three- Solve various problems on
phase system. polyphase system
2.4 State the advantages of 3-phase
circuits.
2.5 Explain how 3-phase emf's are
produced
2.6 Distinguish between star and delta 3-
4-7
phase system.
2.7 Derive the relationship between line
and phase values of voltages and current
in a star and delta connected windings.
2.8 Derive an expression for power in a 3-
phase circuit (balanced and unbalanced).
2.9 Explain the 2-wattmeter and single-
wattmeter methods of measuring 3-phase
power.
2.10 Solve problems on 2.5 to 2.9.
General Objective: 3.0 Understand and apply Time Domain analysis of RC, RL and RLC circuits.
3.1 Explain the meaning of transients Teacher should illustrate domain -do-
3.2 Sketch the growth and decay curves in analysis of RC, RL, RLC circuit with
RC circuits appropriate diagrams and models
3.3 Derive formulae for current & voltage
growths and decay in RC circuits.
3.4 Define time constant
3.5 Explain time constant in RC and
circuits
3.6 Derive expressions for the growth and
133
PROGRAMME: ND IN ELECTRICAL/ELECTRONIC ENGINEERING TECHNOLOGY
Course: ELECTRIC CIRCUIT THEORY II Course Code: EEC 249 Contact Hours: 30
HOURS
General Objective: 3.0 Understand and apply Time Domain analysis of RC, RL and RLC circuits.
Assessment: The continuous assessment, quizzes and tests will be award 40% of the total score
while the remaining 60% will be for the end of semester examination score
134
ELECTRONIC/TELECOMMUNICATION COURSES
Electronics I
EEC124 ELECTRONICS I Y1/2ND SEM 15 HOURS
OUTCOMES:
General Objective: Understand the operating characteristics of diodes, transistor, FET's and Thyristors
1.1 Outline energy levels in materials The material in this module must be kept Chalk, board,
and the electron as a carrier of electricity at a simple level related to bonding , textbooks, and
or charge. agitation due to temperature and the lecture notes
1.2 Explain valence and conduction movement of free electrons constitute a
bands current.
1.3 Explain Fermi energy levels Explain polarity convention between flow
1.4 Distinguish between conductors, direction of charge and flow convention of
semiconductors, and insulators, using current being opposite to each other.
1-4
Fermi-energy level concept.
1.5 Explain intrinsic and extrinsic
semiconductors.
1.6 Explain carriers in semi-conductors
1.7 Define majority and minority carriers
1.8 Outline the effect of temperature on
the conductivity of semi-conductors and
conductors
2.1 Identify the circuit symbols for PN Power dissipation consideration must be -do-
junction diode. brought in at all levels of this course even
5-7
2.2 Explain with the aid of suitable though it is not obvious.
sketches the forward and reverse and
135
PROGRAMME: ND IN ELECTRICAL/ELECTRONIC ENGINEERING TECHNOLOGY
General Objective: Understand the operating characteristics of diodes, transistor, FET's and Thyristors
136
PROGRAMME: ND IN ELECTRICAL/ELECTRONIC ENGINEERING TECHNOLOGY
General Objective: Understand the operating characteristics of diodes, transistor, FET's and Thyristors
Assessment The practical class will be awarded 40% of the total score. The continuous assessments,
tests and quizzes will be 10% the total score, while the remaining 50% will be for the end of Semester
examination
General Objective: Understand and apply the operating characteristics of Semi-conductor devices
137
PROGRAMME: ND IN ELECTRICAL/ELECTRONIC ENGINEERING TECHNOLOGY
General Objective: Understand and apply the operating characteristics of Semi-conductor devices
Assessment: The practical class will be awarded 40% of the total score. The continuous assessments,
tests and quizzes will be 10% the total score, while the remaining 50% will be for the end of Semester
examination
138
Electronics II
EEC 234 ELECTRONICS II Y2/3rd SEM 1/0/2HRS/WK
OUTCOMES
1. Build and test simple electronic circuits made up of basic semi-conductor devices and
used in electronic applications.
2. Understand the use of transistors in CE, CC, and CB circuits.
3. Have an understanding of Biasing, DC and AC coupling.
4. Appreciate the difference between Signal and Power amplifiers.
General Objective: Understand the basic semi-conductor devices and their applications in electronic circuits
1 - 2 1.1 Explain the basic constructional Explain different types of biasing Chalk , board, field
features of FET's (junction gate and arrangement of transistor amplifiers effect transistors,
insulated gate). viz: textbooks, amplifier
1.2 Plot the output and transfer a. fixed bias circuits
characteristics from given data. b. collector-base bias
1.3 Determine mutual conductance and with out a decoupling
drain resistance for the device. capacitor
1.4 State the precautions necessary c. potential divider
3 - 7 when using FET's bias junction FET
1.5 Obtain voltage gain, input and simple bias
output resistance from output Low-power amplifiers
8 - 12 characteristics. Draw the circuit diagram of a single
2.1 Explain dc biasing, dc & AC stage common emitter and common
resistive load lines, Voltage/ Current / source transistor amplifiers having
Power Gain of the stage for bipolar resistive load.
13 - transistors and Field Effect devices. Repeat for transformer Loads, and
15 2.2 Explain the AC equivalent circuit of show effect on load line.
a transistor in each configuration. Draw equivalent circuits of amplifiers
2.3 Calculate the Voltage, Current & in CC, CE, CB mode.
Power Gain of the stage Calculate the voltage and power
3.1 Explain the application and gains of the amplifiers for given data
139
Course: Electronics II Course Code: EEC 234 Contact Hours: 15
HRS LECTURE
General Objective: Understand the basic semi-conductor devices and their applications in electronic circuits
Assessment: The practical class will be awarded 40% of the total score. The continuous assessments,
tests and quizzes will be 10% the total score, while the remaining 50% will be for the end of Semester
examination
1.1 Determine by experiment the Check the Field affect transistors, bipolar transistors,
output and transfer characteristics connection of the voltmeter, ammeter, resistors, transistors
of FET circuit made by cable, veroboard, oscilloscope, frequency
1.2 Determine by experiment the students counter/meter and stabilised power units
d.c power dissipated by Class A, B, Ensure that the
AB and C amplifier students follow the
1.3 Determine by experiment the instruction strictly
1 - 15
power efficiency of Class A, B, AB,
and C amplifiers
1.4 Perform experiment in
investigate the high frequency
response of an amplifier
1.5 Perform experiment to
determine the low frequency
140
Course: Electronics II Course Code: EEC Contact Hours: 30HRS PRACTICALS
234
response of an amplifier
1.6 Perform experiment to
1 - 15 investigate the power output, power
gain, efficiency and non linearity
operation of power amplifier
Assessment: The practical class will be awarded 40% of the total score. The continuous assessments,
tests and quizzes will be 10% the total score, while the remaining 50% will be for the end of Semester
examination
141
Electronics III
EEC 244 ELECTRONICS III Y2/4th SEM 1/0/2 HRS/WK
OUTCOME:
On completion of this module the student should have an understanding of feedback effects in electronic
circuits and where they can be of benefit.
General Objective: Understand the feedback effects in electronic circuits and their applications
1.1 Define Input and Output of a Draw the block diagram of a basic feedback
system, and understand it could mean Instructor must use Industrial examples
many things in a given system. (e.g. wherever possible and bring visual
voltage, or current in an amplifier) components or demonstration to the lecture.
1.2 Understand the general nature of
positive and negative feedback in
systems.
1-3
1.3 Show that the GAIN of a system is
mainly determined by the feedback
function and independent of forward
gain.
1.4 Explain the general expression for
stage gain of a basic feedback in
amplifiers
1.5 Understand the effect of applying Develop circuits based on an OPAMP and
negative feedback to an amplifier in RC components and show how the function is
relation to: obtained.
a. gain Give demonstrations in the class using an
b. gain stability Oscilloscope of the waveforms and frequency
4-8
c. bandwidth meter.
d. distortion Show how the frequency can be changed.
e. noise
f. input and output resistance in
a qualitative sense only.
142
Course: Electronics III Course Code: EEC 244 Contact
Hours: 15
HRS Lecture
General Objective: Understand the feedback effects in electronic circuits and their applications
3.1 Explain how oscillators can be Show the beneficial non linearity of the zener
produced by an amplifier with positive effect on the transistor multivibrators leading to
feedback. voltage control frequency when the base is
3.2 Explain the operation of: driven more than 5 volts negative. This applies
- C oscillator to all transistors
L-C oscillator (Hartley &
Colpitts Oscillators)
3.3 Describe methods of achieving
9 - 15 frequency stability of oscillators e.g.
piezo -electric crystal.
4.1 Explain with the aid of suitable
sketches the operation of the following
multivibrators
4.2 Explain simple applications of
multivibrators circuits.
4.3 Solve simple problems on
multivibrators.
Assessment: The practical class will be awarded 40% of the total score. The continuous assessments,
tests and quizzes will be 10% the total score, while the remaining 50% will be for the end of Semester
examination
143
Course: Electronics III Course Code: EEC 244 Contact Hours:
30HRS Practicals
General Objective: Investigate through laboratory experiments effects of Feedback in electronic circuits
1. Experiment to investigate the effect (i.e. on These assignments will require a Oscilloscope,
a distorted signal, input and output good quality Oscilloscope with oscillators,
impedances) of negative feedback on working trigger facilities. op-amp, Multi-
amplifiers. The instructor should ensure that vibrator,
2. Experiment to investigate the conditions the equipment is serviceable for voltmeter,
necessary for oscillation, and measure the this purpose. ammeter, cable
frequency and amplitude of a sinusoidal signal The students must be made to
of an LC Colpitts oscillator. follow a set procedure to trigger the
3. Experiment to investigate the factors which scope having selected the trigger
affect the operation of LC Hartley oscillator and source.
measure the frequency and amplitude of a These assignments are well
1 - 15 generated signal. presented in the book called
4. Experiment to investigate basic factors "A manual of Laboratory
which influence the operation of transistorised Experiments in Electronics" by
astable multivibrator. C.O.OROGE, FNSE
5. Experiment to investigate the principle of Assignments may be varied
operation of a transistorised bistable provided the outcomes are
multivibrator. satisfied.
6. Experiment to investigate the operation of a
transistorised monostable multivibrator.
7. Experiment to observe and measure both
the input and output waveforms of a bridge
rectifier and the effects of different filter circuits
Assessment: The practical class will be awarded 40% of the total score. The continuous assessments,
tests and quizzes will be 10% the total score, while the remaining 50% will be for the end of Semester
examination
144
Telecommunication Engineering I
EEC 128 TELECOMMUNICATION ENGINEERING I Y1.2ND SEMESTER 1/0/2 HRS/WK
OUTCOMES:
1.1 Draw the block diagram of a simple Draw a typical Tele- Students to visit NITEL
communication system showing:- communication system and transmitter station &
a. Input transducer; explain how it works. Exchange, textbooks,
b. Transmitter; Explain how a signal is chalk, board.
c. Transmission channel; generated from the transducer.
1-2
d. Receivers; List various types of
e. Output transducer. transducer that can be used for
1.2 Explain the function of the blocks listed telecommunications.
in 1.1 above. Explain the need for
modulation.
General Objective: 2.0 Understand the principles of operation and application of various transducers.
2.1 Describe sound transducers; Explain the uses and Students to visit
a. Microphones operations of transducers broadcasting stations,
b. loud speakers textbooks
2.2 Explain, with the aid of diagrams, the
3 - 5 principles of operation and uses of:
a. Carbon microphone;
b. Crystal microphone;
c. Moving coil
loudspeaker;
145
PROGRAMME: ND IN ELECTRICAL/ELECTRONIC ENGINEERING TECHNOLOGY
General Objective: 2.0 Understand the principles of operation and application of various transducers.
General Objective: 3.0 Understand the basic principles of modulation and demodulation
146
PROGRAMME: ND IN ELECTRICAL/ELECTRONIC ENGINEERING TECHNOLOGY
General Objective: 3.0 Understand the basic principles of modulation and demodulation
A.M.
8 - 9 3.8 Solve problems involving 3.6 and 3.7
above.
General Objective: 4.0 Understand the principles of amplitude modulation and frequency modulation.
General Objective: 5.0 Understand the principles of operation of the radio receiver
5.1 Draw the block diagram of the Draw Block diagram of radio Dismantle a TV set and
following radio receivers. receiver show the components to
a. straight; students.
b. superheterodyne.
5.2 Explain the function of each block
diagram in 5.1
5.3 Explain the choice of intermediate
frequency in the superheterodyne receiver.
5.4 Explain the following phenomena in
12 -
superheterodyne receiver:- a. adjacent
15
channel interference b. image interference.
5.5 Explain the use of double
superheterodyne to suppress image and
adjacent channel interferences.
5.6 Explain the function of the automatic
gain control (A.G.C.)
5.7 Explain with the aid of a block diagram,
the working principle of an F.M. radio
receiver.
Assessment: The practical class will be awarded 40% of the total score. The continuous assessments,
tests and quizzes will be 10% the total score, while the remaining 50% will be for the end of Semester
examination
147
Telecommunication Engineering II
EEC 238 TELECOMMUNICATION ENGINEERING II Y2/3rd SEMESTER 1/0/2 HRS/WK
OUTCOME:
General Objective 1.0: Know the principles of black and white television transmission
Radio and Black/White T.V. Transmission Explain principle and circuit Textbooks, board,
1.1 Draw block diagrams of the following Diagrams of typical chalk, TV sets,
radio transmitters using: Telephone circuit. frequency generator.
a. amplitude modulation;
b. frequency modulation.
1.2 Explain the function of each block in 4.1.
1-3
1.3 Draw the block diagram of a television
transmitter (black & white).
1.4 Explain the function of each block in 4.3.
1.5 Explain how vision and sound signals
are generated separately and transmitted
together.
General Objective 2.0: Know various frequency bands within the radio spectrum.
148
Course: TELECOMMUNICATION ENGINEERING Course Code: EEC 238 Contact Hours:
II 1/0/2hrs/wks
General Objective 2.0: Know various frequency bands within the radio spectrum.
3.1 Explain the function of an aerial as a Ask students to identify Aerials, textbooks,
radiator various, types and board, chalk, wave
3.2 Know the current and voltage distribution applications of aerial. guides and coaxial
of a dipole State the factors guiding the cables
3.3 Explain aerial impedance and radiation choice of aerials
resistance.
3.4 Define an isotropic radiator
3.5 Define the gain of an aerial
3.6 Define the beamwidth of an aerial
3.7 Sketch the polar diagram or the radiation
8 - 11
pattern of an aerial.
3.8 Sketch the horizontal and vertical plane
patterns of a horizontal and vertical dipole.
3.9 Identify various types of aerials: e.g.
Yagi, Rhombic, etc.
3.10 Sketch Yagi and rhombic aerials
3.11 Explain the effect of frequency on aerial
dimensions and performance.
3.12 Explain the factors guiding the choice of
aerials.
149
Course: TELECOMMUNICATION ENGINEERING Course Code: EEC 238 Contact Hours:
II 1/0/2hrs/wks
Assessment: The practical class will be awarded 40% of the total score. The continuous assessments,
tests and quizzes will be 10% the total score, while the remaining 50% will be for the end of Semester
examination
150
Course: Telecommunications Engineering II Course Code: EEC Contact Hours: 30hrs Practicals
280
General Objective: Investigate and analyse the characteristics of simple telecommunication circuits
Assessment: The practical class will be awarded 40% of the total score. The continuous assessments,
tests and quizzes will be 10% the total score, while the remaining 50% will be for the end of Semester
examination
151
PROJECT
Project
EEC 280 PROJECT AND PROJECT REPORT WRITING Y2/4 TH SEMESTER 0/0/3 HRS/WK
OUTCOMES
Course: PROJECT AND PROJECT REPORT WRITING Course Code: EEC 280 Contact Hours:
45hrs/wks
General Objective 1.0: Understand the practical constructional requirements of the project undertaken
1.1 Identify all the components in a given circuit Teacher should give Chalk, board,
1.2 Explain the functionality of a schematic/block every necessary circuit diagrams,
diagram given for the project. assistance to students layout and
1.3 Plan the layout for the execution of the project on during supervision textbooks
1 - 4 stage-by-stage basis.
1.4 Carry out the execution of the project as scheduled
in (1.3)
1.5 Test the functionality of the completed project.
1.6 Carry out correction of any detected error/faults
General Objective 2.0: Understand the standard format for project report writing
2.1 Explain the purpose of each of the following sections Explain to the students - do -
of a project report. the approved format of
a. Cover page writing technical reports
b. Title page Show samples of
c. Approval page project reports in the
5-8 d. Declaration page standard format
e. Table of contents
f. Acknowledgements
g. Abstract/Summary
h. List of symbols/abbreviations
i. List of tables
152
Course: PROJECT AND PROJECT REPORT WRITING Course Code: EEC 280 Contact Hours:
45hrs/wks
General Objective 2.0: Understand the standard format for project report writing
j. List of figures
k. Body of the project report, divided into
chapters
l. References
m. Appendices
2.2 Explain the standard format of writing items (i) - (x) in
2.1 above. Arrange the body of the project report,
according to the following chapters:
2.3 Explain the standard format of writing references in
regards to the following:
5-8 a. Textbooks
b. journals
c. past students' projects
d. lecturer notes
e. newspapers/magazine
f. seminars/workshops, etc
2.4 Explain the standard format of presenting
appendices in the form of
a. tables
b. diagrams
c. parts list, graphs, etc
153
Course: PROJECT AND PROJECT REPORT WRITING Course Code: EEC 280 Contact Hours:
45hrs/wks
General Objective 2.0: Understand the standard format for project report writing
Assessment: The project, report writing and project defence will be awarded 100% of the total score.
154
LIST OF MINIMUM RESOURCES
BASIC ELECTRICAL/MEASUREMENT AND INSTRUMENTATION LAB. (ND)
0- 25 A DC 10
0- 25 A AC 10
3 Milliameter
0- 1000mA DC 10
0- 1000mA AC 10
4 Micrommeter
0- 1000mA DC 10
0- 1000mA AC 10
5 Voltmeter
0- 500V DC 10
0- 500V AC 10
6 Millivoltmeter
0- 1000mV DC 10
7 Variac 5
8 Ohmeter
0- 5 ohms 10
0- 25 ohms 10
0- 50 ohms (Multirange) 10
50-0-50mA 10
500-0-500mA 10
5-0-5 mA 10
10 Wattmeter
Single phase 5
Three phase 5
11 Megger tester
12 Wheastone Bridge
13 Potentiometer 5
155
BASIC ELECTRICAL/MEASUREMENT AND INSTRUMENTATION LAB. (ND)
15 C R Oscillators 5
18 Earth-loop tester 5
2. Techogenerator 5 units
3. DC motors:
- Series 3
- Shunt 3
- Compound 3
4. DC Generators 3
- Self excited 1-
Separately
excited 2
- Shunt 2
- Compound 3
- Starters
5. A. C. Motors:
- Dynamometer set 2
- Star-delta starters 4
6. Transformers:
- Demonstration unit 1
- Single phase 4
- 3 phase 4
156
BASIC ELECTRICAL/MEASUREMENT AND INSTRUMENTATION LAB. (ND)
1. Demonstration units 2
3. Transformer (power) 1
5. Wattmeter:
- Single 5
- 3 Phase 5
6. Energy meter:
- Single 5
- 3 Phase 5
7. Voltmeter:
- 0 - 500 DC 5
- 0 - 500 AC 5
8. Ammeter:
- 0 - 15A 10
- 0 - 5A 10
- 0 - 30A 5
9. Clip-on ammeter 4
16. Stroboscope 2
157
BASIC ELECTRICAL/MEASUREMENT AND INSTRUMENTATION LAB. (ND)
1. Bench vices 10
2. Pedestral drill 2
7. Starter:
- Direct online 3
- Star delta 3
- Auto Transformer 1
9. Refrigerator (used) 2
11. Megger 2
- Battery
- Electrolytes
- Hydrometer
- Voltmeter (Volt-tester)
158
BASIC ELECTRICAL/MEASUREMENT AND INSTRUMENTATION LAB. (ND)
2. Pedestral drill 1
3. Hand drill 5
7. Bench vices 5
- Soldering iron 30
- Blowlamp 3 sets
18. Trunkings
21. Meggers
159
BASIC ELECTRICAL/MEASUREMENT AND INSTRUMENTATION LAB. (ND)
- Safety belts 10
- Earthing kits 3
1. AVO meter 5
2. Megger tester 5
3. Valve tester 5
4. Transistor tester 5
5. Galvanometer 5
11. Amplifiers 5
12. Microphones 5
13. Transceivers 2
14. Receivers 5
160
BASIC ELECTRICAL/MEASUREMENT AND INSTRUMENTATION LAB. (ND)
6. Oscilloscopes:
8. Valve tester
9. Transistor tester 5
11. Amplifiers 5
161
BASIC ELECTRICAL/MEASUREMENT AND INSTRUMENTATION LAB. (ND)
19. Milliammeter:
-0- 1000m A DC 5
-0- 1000m A AC 5
20. Microammeter:
-0- 1000mA DC 10
-0- 1000m A AC 10
21. Millivolmeter
-0- 1000m V DC 10
-50-0-50m A 10
-500-0500m A 10
-5-0-5m A 10
24 Avometer (Model-8) 5
162
LIST OF BOOKS (ND)
Recommended List of Books for Electronics:
Communication Engineering
163
Recommended List of Books for Circuit Theory
Electrical Machines
164
GUIDELINES FOR TEXT BOOK WRITERS
The following guidelines are suggestions from the Engineering Committees to the writers of the textbooks for
the new curricula. They are intended to supplement the detailed syllabuses which have been produced, and
which define the content and level of the courses.
Authors should bear in minds that the curriculum has been designed to give the students a broad
understanding of applications in industry and commerce, and this is reflected in the curriculum objectives.
165
LIST OF PARTICIPANTS
1 Engr. Dr. Nuru A. Yakubu National Project Coordinator & Executive Secretary, NBTE
Curriculum Review Team Members for Information and Communication Technology (ND/HND Programmes)
166
CURRICULUM DEVELOPMENT TEAM MEMBERS FOR ND/HND ELECTRICAL ENGINEERING
TECHNOLOGY
167