OEE/2016-17/05 Dt.

25/05/2016
Bill of Boiler Panel
Sr Description Make Qty Unit
A1 Incomer & Metering Section 1

1 Phase Indicating Lamp, 240 VAC, LED Type, (Red) Jigo 1 No

2 Phase Indicating Lamp, 240 VAC, LED Type, (Yellow) Jigo 1 No
3 Phase Indicating Lamp, 240 VAC, LED Type, (Blue) Jigo 1 No
4 315A TPN SFU L&T 1 No
5 315A HRC Fuselinks Din type L&T 3 No
6 Voltmeter 0-500V. Size 96 x 96 mm L&T 1 No
7 VSS L&T 1 No
8 Ammeter 0-500A. Size 96 x 96 mm L&T 1 No
9 ASS L&T 1 No
10 C.T -Ratio: 315/5,class1,10VA Tape wound Krishna 1 No
11 Control fuse 2A with 20A Fuse base L&T 3 No
12 Neutral link Elmex 1 No
B Outgoing section
B1 7.5KW (10 HP) DOL Feeder For Feed Water Pump 1&2 Quantity 2 No
1 40A TP MCB C-CURVE L&T 2 No
2 25A 3P Power Contactor, Coil voltage 230V AC with 1NO L&T 2 No
3 1 NO Add on Block L&T 2 No
4 Bi mettalic overload relay 14-23A L&T 2 No
5 start/stop selector switch L&T 1 No
6 Auto/Manual selector switch L&T 1 No
7 On Indicating lamp - LED Type, Red, 230 V AC Jigo 2 no
8 Trip Indicating lamp - LED Type, Amber, 230 V AC Jigo 2 No
9 Power terminals O/G Elmex 6 No
B2 12.5KW (15HP) S/D Feeder For P.A Fan 1 Quantity 1 No
1 63A TP MCB C-CURVE L&T 1 No
2 25A 3P Power Contactor, Coil voltage 230V AC with 1NO L&T 3 No
3 0-60 Sec On-Delay Timer Shavision 1 No
4 2 NO + 2 NC Add on Block L&T 3 No
6 Bi mettalic overload relay 9-15A L&T 1 No
7 start/stop selector switch with 2NC element L&T 1 No
8 On Indicating lamp - LED Type, Red, 230 V AC Jigo 2 no
9 Trip Indicating lamp - LED Type, Amber, 230 V AC Jigo 2 No
10 Power terminals O/G Elmex 6 No
B3 45 KW (60 HP) Star-Delta Feeder For I.D & F/D Fan Quantity 2 No
1 125A DN1-160M 50KA MCCB L&T 2 No
2 Spreader Link L&T 2 Set
3 80A 3P Power Contactor, Coil voltage 230V AC L&T 4 No
4 70A 3P Power Contactor, Coil voltage 230V AC L&T 2 No
5 2 NO + 2 NC Add on Block L&T 6 No
5 S/D Timer, 230 VAC, 0.3 - 60 Sec. Shavison 2 No
6 Bi mettalic overload relay 45-70A L&T 2 No
7 start/stop selector switch with 2NC element L&T 2 No
8 On Indicating lamp - LED Type, Red, 230 V AC Jigo 2 no
9 Trip Indicating lamp - LED Type, Amber, 230 V AC Jigo 2 No
10 Power terminals O/G Elmex 12 No
B4 0.75kW (1HP) DOL Feeder For RAV Quantity 1 No
1 16A TP MCB C-CURVE 10KA L&T 1 No
2 9A 3P Power Contactor, Coil voltage 230V AC with 1NO L&T 1 No
3 Bi mettalic overload relay 2-3A L&T 1 No
4 start/stop selector switch with 2NC element L&T 1 No
5 On Indicating lamp - LED Type, Red, 230 V AC Jigo 1 No
6 Trip Indicating lamp - LED Type, Amber, 230 V AC Jigo 1 No
7 Power terminals O/G Elmex 3 No
B5 0.75kW (1HP) VFD for Fuel Feeder 1&2 Quantity 2 No
1 16A TP MCB C-CURVE 10KA L&T 2 No
2 VFD I/P 440VAC & O/P 440VAC L&T 2 No
3 RPM meter 0--230VAC ,sensor 0-10V Size 96 x 96mm Multispan 2 No
4 Potientiometer 10KOHM 3W 1-Turn with Knob Pankaj 2 No
5 start/stop selector switch L&T 2 No
6 Auto/Manual selector switch L&T 2 No
7 Solid state relay with base 2C/0 230VAC Pla 2 No
8 On Indicating lamp - LED Type, Red, 230 V AC Ideal 2 No
9 Trip Indicating lamp - LED Type, Amber, 230 V AC Ideal 2 No
10 Power terminals O/G Elmex 6 No
B6 Control feeder Quantity 1 No
1 6A SP, MCB, 10kA, C Curve L&T 1 No
2 Key lock with on 1NC element Power 1 No
3 HRS Meter GIC 1 No
4 Panel Exhaust Fan 4" Rexonard 1 No
5 Filter grill 4" Jainson 2 No
6 PID Controller 230VAC Sensor PT 100 Vertex 2 No
7 Temperature Indicator 230VAC Sensor Pt100 0-1000C Multispan 1 No
8 Auto/Manual switch 3 Position 3Pole L&T Salzer 1 No
9 Hooter 230VAC Shavison 1 No
10 Solid state relay with base 2C/0 230VAC Pla 2 No
11 Accept Push button with 1NO(Red) L&T 1 No
12 Sequence start Push Button with 1No(Red) L&T 1 No
13 On Indicating lamp - LED Type, Amber, 230 V AC Power 5 No
14 Trip Indicating lamp - LED Type, Amber, 230 V AC L&T 5 No
15 Control Terminal Elmex 1 Lot

C Fabrication Size : 1350(H) x 2425 (W) x 325(D) mm

Fabrication : 16 SWG CRCA Sheet
Pre Treatment : 7 Tank Process
Painting : Powder Coated with Siemens Grey shade ( RAL 7032 )
Type : Free Floor Resting ,Fix type, Single Front , Non Compartmentalised
Cable Entry : Bottom

D Wiring of all feeders using wires of Polycab/RR Kabel make

Metering 1
10Hp dol 2
VFD feeder 2
Control wiring for others 1
15 Hp S/D feeder 1
60 Hp S/D feeder 2
Rav 1
E Busbar Aluminium Electrolyte Grade Considering current density 0.8 mm2
40 x 10 1Run For Phase
40 X 05 1Run For Neutral
25 X 05 1Run For Earthing