IES Civil Syllabus

UNION PUBLIC SERVICE COMMISSION, NEW DELHI
ENGINEERING SERVICES EXAMINATION (ESE) SYLLABI

Branch/Discipline: Civil Engineering
(Contents for syllabi of both the Papers together for Stage-I objective type
PaperII and separately fsor Stage-II Conventional type Paper-I and Paper
II)
PAPER I
1. Building Materials:
Stone, Lime, Glass, Plastics, Steel, FRP, Ceramics, Aluminum, Fly Ash,
Basic Admixtures, Timber, Bricks and Aggregates: Classification, properties
and selection criteria;Cement: Types, Composition, Properties, Uses,
Specifications and various Tests; Lime & Cement Mortars and Concrete:
Properties and various Tests; Design of Concrete Mixes: Proportioning of
aggregates and methods of mix design.
2. Solid Mechanics:
Elastic constants, Stress, plane stress, Strains, plane strain, Mohrs circle of
stress and strain, Elastic theories of failure, Principal Stresses, Bending,
Shear and Torsion.
3. Structural Analysis:
Basics of strength of materials, Types of stresses and strains, Bending
moments and shear force, concept of bending and shear stresses; Analysis of
determinate and indeterminate structures; Trusses, beams, plane frames;
Rolling loads, Influence Lines, Unit load method & other methods; Free and
Forced vibrations of single degree and multi degree freedom system;
Suspended Cables; Concepts and use of Computer Aided Design.
4. Design of Steel Structures:
Principles of Working Stress methods, Design of tension and compression
members, Design of beams and beam column connections, built-up sections,
Girders, Industrial roofs, Principles of Ultimate load design.
5. Design of Concrete and Masonry structures:
Limit state design for bending, shear, axial compression and combined
forces; Design of beams, Slabs, Lintels, Foundations, Retaining walls, Tanks,
Staircases; Principles of pre-stressed concrete design including materials and
methods; Earthquake resistant design of structures; Design of Masonry
Structure.
6. Construction Practice, Planning and Management:
Construction - Planning, Equipment, Site investigation and Management
including Estimation with latest project management tools and network
analysis for different Types of works; Analysis of Rates of various types of
works; Tendering Process and Contract Management, Quality Control,
Productivity, Operation Cost; Land acquisition; Labour safety and welfare.
PAPER II
1. Flow of Fluids, Hydraulic Machines and Hydro Power:
(a) Fluid Mechanics, Open Channel Flow, Pipe Flow:
Fluid properties; Dimensional Analysis and Modeling; Fluid dynamics
including flow kinematics and measurements; Flow net; Viscosity, Boundary
layer and control, Drag, Lift, Principles in open channel flow, Flow controls.
Hydraulic jump; Surges; Pipe networks.
(b) Hydraulic Machines and Hydro power -
Various pumps, Air vessels, Hydraulic turbines types, classifications &
performance parameters; Power house classification and layout, storage,
pondage, control of supply.
2. Hydrology and Water Resources Engineering:
Hydrological cycle, Ground water hydrology, Well hydrology and related
data analysis; Streams and their gauging; River morphology; Flood, drought
and their management; Capacity of Reservoirs.
Water Resources Engineering : Multipurpose uses of Water, River basins and
their potential; Irrigation systems, water demand assessment; Resources -
storages and their yields; Water logging, canal and drainage design, Gravity
dams, falls, weirs, Energy dissipaters, barrage Distribution works, Cross
drainage works and head-works and their design; Concepts in canal design,
construction & maintenance; River training, measurement and analysis of
rainfall.
3. Environmental Engineering:
(a) Water Supply Engineering:
Sources, Estimation, quality standards and testing of water and their
treatment; Rural, Institutional and industrial water supply; Physical, chemical
and biological characteristics and sources of water, Pollutants in water and its
effects, Estimation of water demand; Drinking water Standards, Water
Treatment Plants, Water distribution networks.
(b) Waste Water Engineering:
Planning & design of domestic waste water, sewage collection and disposal;
Plumbing Systems. Components and layout of sewerage system; Planning &
design of Domestic Waste-water disposal system; Sludge management
including treatment, disposal and re-use of treated effluents; Industrial waste
waters and Effluent Treatment Plants including institutional and industrial
sewage management.
(c) Solid Waste Management:
Sources & classification of solid wastes along with planning & design of its
management system; Disposal system, Beneficial aspects of wastes and
Utilization by Civil Engineers.
(d) Air, Noise pollution and Ecology:
Concepts & general methodology.
4. Geo-technical Engineering and Foundation Engineering :
(a) Geo-technical Engineering : Soil exploration - planning & methods,
Properties of soil, classification, various tests and inter-relationships;
Permeability & Seepage, Compressibility, consolidation and Shearing
resistance, Earth pressure theories and stress distribution in soil; Properties
and uses of geo-synthetics.
(b) Foundation Engineering: Types of foundations & selection criteria,
bearing capacity, settlement analysis, design and testing of shallow & deep
foundations; Slope stability analysis, Earthen embankments, Dams and Earth
retaining structures: types, analysis and design, Principles of ground
modifications.
5. Surveying and Geology:
(a) Surveying: Classification of surveys, various methodologies, instruments
& analysis of measurement of distances, elevation and directions; Field
astronomy, Global Positioning System; Map preparation; Photogrammetry;
Remote sensing concepts; Survey Layout for culverts, canals, bridges,
road/railway alignment and buildings, Setting out of Curves.
(b) Geology : Basic knowledge of Engineering geology & its application in
projects.
6. Transportation Engineering:
Highways - Planning & construction methodology, Alignment and geometric
design; Traffic Surveys and Controls; Principles of Flexible and Rigid
pavements design.
Tunneling - Alignment, methods of construction, disposal of muck, drainage,
lighting and ventilation.
Railways Systems Terminology, Planning, designs and maintenance
practices; track modernization.
Harbours Terminology, layouts and planning. Airports Layout, planning
& design.
General Studies and Engineering Aptitude
(Stage I - Paper I, Objective type, Common to all Candidates,
2 hours duration, 200 Marks maximum)
The questions from the following Topics will be set in Paper-I
of Stage-I
1. Current issues of national and international importance
relating to social, economic and industrial development
2. Engineering Aptitude covering Logical reasoning and
Analytical ability
3. Engineering Mathematics and Numerical Analysis
4. General Principles of Design, Drawing, Importance of
Safety
5. Standards and Quality practices in production,
construction, maintenance and services
6. Basics of Energy and Environment : Conservation,
environmental pollution and degradation, Climate Change,
Environmental impact assessment
7. Basics of Project Management
8. Basics of Material Science and Engineering
9. Information and Communication Technologies (ICT)
based tools and their applications in Engineering such as
networking, e-governance and technology based
education.
10. Ethics and values in Engineering profession
Note:
The paper in General Studies and Engineering Aptitude will
include Knowledge of relevant topics as may be expected
from an engineering graduate, without special study.
Questions from all the 10 topics mentioned above shall be set.
Marks for each Topic may range from 5% to 15% of the total
marks in the paper.

IES Civil Syllabus

Uploaded by

Copyright:

Available Formats

IES Civil Syllabus

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

IES Civil Syllabus

Uploaded by

Copyright:

Available Formats

UNION PUBLIC SERVICE COMMISSION, NEW DELHI

ENGINEERING SERVICES EXAMINATION (ESE) SYLLABI

You might also like