SUIT

Sysmex Universal Interface

Document Information

Status Release version

Version 8.0
Last edited date 24-06-2014
Validator Olivier Kaulmann

Version History
Version Date Author Comment
1.0 10.05.2005 Thomas Initial Version of the SUIT-Description based on the SIS 2.0-
Ettrich Description by Mieko Asada
2.0 05.01.2007 Susanne Test-Codes and Flags are added for the support of the
Jkel UF-1000i
3.0 05.03.2007 Thomas The font Times New Roman was exchanged with the
Ettrich font Arial
Some text-passages are point out
Added a more precisely description how to handle an
OBR-5 which is exceeding 200 Bytes.
Added a note for the ordering in a multi-discipline
environment at chapter 3.3.1
Replaced the Yen-Character by \
Added the test-codes for the XE-5000 and CA-Series
4.0 21.05.2007 Thomas Corrected the host-codes for COND-Info, RBC-Info and
Ettrich UTI-Info
Added parameters for the UF-1000 like Flag Path CAST,
Flag SRC, Flag SPERM, Flag XTAL, Flag YLC, Flag
MUCUS, Flag Conduc
5.0 08.08.2008 Kaulmann Re-structure the document
Olivier Added use case for better understanding
OBX-6 field length extended from 14 to 106
OBX-4 field lenght extended from 15 to 60
09.09.2008 Added new parameters at the haematology section (5.3.1)
6.0 13.11.2009 Kaulmann Add new analyzer XT4000i and AX4030, refer page 2
Olivier Rename IP flag Leucocytosis into Leukocytosis,
refer chapter 5.4
Add new Scatergram RET-E and Histogram RBC-Y,
refer chapter 5.1.1, 5.1.2
June 2014 - Version 8.0

Update Appendix D: Interpretation-flags

Add following new parameters at chapter 5.3.1:
TC-PMN%, TC-MN%, TC-EO%,TC-HF%

Sysmex - Universal Interface SUIT

 7.0 27.06.2011 Kaulmann Add new chapter: 5.4.1 Action & error messages and
Olivier positive flagging information
Add 5.6 Appendix F: Case Manager
Update chapter 5.4 Appendix D: Interpretation-Flags
(IP Flags)
Update chapter 5.3 with the test code available with XN
analyzer
Update chapter 5.3.2 with the urinalysis parameter name
Update chapter 5.4 with the Interpretation-Flags available
with XN analyzer
8.0 24.06.2014 Kaulmann Update chapter 5.1.2 Case that SUIT supplies "png" files
Olivier Update chapter 5.3.2 Haematology section: research
parameter and service parameter
Update chapter 5.4 Appendix D: Interpretation-Flags (IP
Flags): rename Blast/Abn_Lympho? Into Blasts/
Abn_Lympho?
Update chapter 5.4.1 Action & Error Messages and
positive flagging information
June 2014 - Version 8.0

Sysmex - Universal Interface SUIT

Table of contents

Table of contents

1 Introduction.............................................. 1

2 Communication Specifications .............. 3

3 SUIT Interface .......................................... 4

3.1 Physical Level ............................................................... 4
3.2 Data Link Level ............................................................. 4
3.2.1 Setting Status ........................................................................ 5
3.2.2 Forwarding Status.................................................................. 6
3.2.3 End Status ............................................................................. 7
3.3 Protocol......................................................................... 8
3.3.1 SUIT HOST (Test Order).................................................. 8
3.3.2 SUIT HOST (Test Results) ............................................... 9
3.3.3 SUIT HOST (Order Inquiry) .............................................. 9
3.3.4 SUIT HOST (Order Command) ...................................... 10
3.3.5 SUIT HOST (QC Data) ................................................... 10

4 Message Format .................................... 11

4.1 Message and Record.................................................. 11
4.1.1 Record ................................................................................. 11
4.1.2 Fields ................................................................................... 11
4.2 Header Record............................................................ 12
4.3 Patient Record ............................................................ 13
4.4 Order Record .............................................................. 15
4.5 Test Result Record ..................................................... 18
4.6 Comment Record........................................................ 20
4.7 Order Inquiry Record .................................................. 21
4.8 Scientific Information Record ...................................... 22
4.9 End Mark Record ........................................................ 23

5 Appendixes ............................................ 25
5.1 Appendix A: Information concerning the graphic-files
management ............................................................... 25
5.1.1 Case that SUIT supplies bmp-files ...................................... 25
5.1.2 Case that SUIT supplies png files ..................................... 26
5.1.3 Summary of which image file type is generated depending on
analyzer or solution type...................................................... 27
5.2 Appendix B: Examples of Logfiles .............................. 28
5.2.1 Query for an order with an answer of LIS for a registered
sample ................................................................................. 28
5.2.2 Query for an order with an answer of LIS for an unknown
June 2014 - Version 8.0

sample ................................................................................. 28
5.2.3 Order for multiple disciplines ............................................... 29
5.2.4 Result with graphical information in PNG-format................. 29
5.2.5 Result with graphical information in BMP-Format................ 31
5.2.6 Quality Control log files........................................................ 34

I Sysmex - Universal Interface SUIT

 Table of contents

5.3 Appendix C: host codes.............................................. 38

5.3.1 Haematology section .......................................................... 38
5.3.2 Urinalysis section ................................................................ 45
5.3.3 Coagulation section ............................................................ 47
5.3.4 Sample tracking information ................................................ 48
5.4 Appendix D: Interpretation-Flags (IP Flags) ............... 49
5.4.1 Action & Error Messages and positive flagging information 50
5.5 Appendix E: Optional specification of OBR-3
management .............................................................. 51
5.6 Appendix F: Case Manager........................................ 51
5.6.1 Case Manager specific test codes & test names................. 51
5.6.2 Case Manager Results ........................................................ 52
5.6.3 Log file example .................................................................. 52
June 2014 - Version 8.0

Sysmex - Universal Interface SUIT II

Introduction

Introduction

1 Introduction
This document describes the Communication Specifications of
the Sysmex Universal Interface (SUIT). This protocol is based
on the ASTM standards E1238-94 and E1381-91

(1) Presentation Level

ASTM E1238-94 Standard Specification for Transferring
Clinical Observations Between Independent Computer
Systems

(2) Physical Level and Data Link Level

ASTM E1381-91 Specification for Low-level Protocol to
Transfer Message Between Clinical Laboratory
Instruments and Computer Systems

Please refer the original ASTM documents for the details

3 Note:
SUIT supports the order query mode as well as the order
(batch) download mode. Which specific communication
mode is used depends on the device type (analyzer) or
solution type (WAM) which is connected to the host.

Be prepared for both modes and wait for our confirmation

which communication mode has to be used.

This document consists of 2 main chapters:

The SUIT interface and Message format chapters:
Theses chapters describe the communication protocol
itself which is mainly the same for all device types or WAM
solution connected to the hosts and
The Appendix chapters:
These chapters describe the differences between the
different analyzer types and solution types (WAM)
connected to the host. The differences consist of the:
graphic file management
analyzer specific test names and flags names
Some Log files are detailed in Appendix B meant to provide
additional information for better understanding.
June 2014 - Version 8.0

1 Sysmex - Universal Interface SUIT

 Introduction

Different analyzer types and WAM solution types

As mentioned different analyzer types and WAM solution types

exists which all communicate to the LIS in the SUIT format.
These different types can be summarized into 4 categories.
Please refer to the table1 below which lists the different
Analyzer types and WAM solution types

Haematology Urinalysis Coagulation WAM solution

Devices Devices Device
XN series: UF1000i CS-2000i SIS / TWIST /ELC:
XN-1000 UF500i XE series
XN-2000 XS series
XN-3000 XT series
XN-9000 K-4500
XE series: K-X21
XE5000 DM8 & DM96
XE2100 Manual differentiation WP
XE2100D
XS series: UF50
XS1000i UF100
XS800i UF100i
XT series: UF500i
XT2000i UF1000i
XT1800i Dispstik reader:
XT4000i Cobas U411
Urisys 1800
Urisys 2400
Miditron M
Clinitek Atlas
Clinitek 200+
AX-4280
AX-4030
CA series:
CA-500
CA-6000
CA-7000
CS-2000i
VesCube
STARSED
Tube Sorter:
TS-500
June 2014 - Version 8.0

TS-1000
Table 1: Different analyzer types and WAM solution types

Sysmex - Universal Interface SUIT 2

Communication Specifications

Communication Specifications

2 Communication Specifications
The communication specifications are based on different
levels
(1) Physical Connection Method:
RS-232C or Ethernet connection per HOST connection.
(2) No. of HOST connection lines:
SUIT supports up to 2 line connection to the LIS:
case of 1 line configuration: Test Orders & Test
Results on same line
case of 2 lines configuration1: Test Orders / Test
Results on separate lines
(3) Communication Mode2:
Query mode or Batch download mode

(4) Communication Description:

Test Order HOST SUIT
Order Inquiry HOST SUIT
Test Result HOST SUIT:
(5) Test Order: 300 items / sample
(6) Test Result: 300 items / sample

3
June 2014 - Version 8.0

*1. Some configurations are not able to work with a 2 line connection configuration. In case you require
a 2 line connection, please ask for confirmation.
*2. SUIT supports the order query mode as well as the order (batch) download mode. Which specific
communication mode is used depends on the device type (analyzer) or solution type (WAM) which is
connected to the host.
Be prepared for both modes and wait for our confirmation which communication mode has to be used.

3 Sysmex - Universal Interface SUIT

SUIT Interface

SUIT Interface

3 SUIT Interface

3.1 Physical Level

With the exception of the following, this specification conforms
to ASTM E1381-91 standard:
RS-232C or Ethernet (RS-232D for ASTM)
RS-232C Connector: D-SUB 25pin Male or D-SUB 9pin
Male
D-SUB 25pin Male:
Pin Code Name Signal Direction
1 Shield
2 Send Data Output
3 Receive Data Input
4 Request To Send Output
5 Clear To Send Input
6 Data Set Ready Input
7 Ground
20 Data Terminal Ready Output
D-SUB 9pin Male:
Pin Code Name Signal Direction
1 Shield
2 Receive Data Input
3 Send Data Output
4 Data Terminal Ready Output
5 Ground
6 Data Set Ready Input
7 Request To Send Output
8 Clear To Send Input
(3) RS-232C Settings Parameters (Default Underlined)
Start bit : 1 (0 in Binary expression)
Stop bit : 1 , 2 (1 in Binary expression)
Data Byte :7,8
Parity : N/A, Even Numbers, Odd Numbers
Transmission
Speed (bps) :1200, 2400, 4800, 9600, 19200

3.2 Data Link Level

Data Link Level consists of the following 3 types of
communication status:
June 2014 - Version 8.0

Setting Status:
Establish a logical communication and determine the
sending direction of information. This defines the Sending
and Receiving sides.

Sysmex - Universal Interface SUIT 4

SUIT Interface

Forwarding Status:
The Sending side transmits messages to the Receiving
side.
End Status:
Open the communication line(s) and change to idle status
for both the Sending and Receiving side.

3.2.1 Setting Status

Establish a logical communication line to determine the

sending direction of information.
1. The Sending side transmits [ENQ] to the Receiving side.
In its response, the Receiving side:
Returns [ACK] if the transmission is available.
Returns [NAK] if the transmission is unavailable.
The Sending side must wait 10 seconds before
re-sending [ENQ].
Sending side Receiving Sending side Receiving
side side
1. [ENQ] 1. [ENQ]

[NAK] 2. [NAK] 2.
3.
10 sec.

4. [ENQ]

2. When both sides send [ENQ] ([ENQ] clash), the Slave

Computer side has priority over the Host Computer.
The Slave Computer re-sends [ENQ] 1 second later.
The Host Computer must wait 20 seconds before
re-sending.
HOST SUIT HOST SUIT
[ENQ] 1. 1. [ENQ]

2. [ENQ] [ENQ] 2.

[ENQ] 3. (1Sec.) Within 20 Sec.

3. [ENQ]
June 2014 - Version 8.0

5 Sysmex - Universal Interface SUIT

 SUIT Interface

3.2.2 Forwarding Status

The Sending side transmits a message to the Receiving side.

The following is an example of the text frame structure:
[STX] [F#] [ TEXT ] [ETX] [CHK1] [CHK2] [CR] [LF]

3 Note:
When the text exceeds 240 characters, use a [ETB] to
divide and create 2 or more frames
[STX] [F#] [ TEXT ] [ETB] [CHK1] [CHK2] [CR] [LF]

Symbol Code Description

[STX] Indicates the beginning Code to be sent at the beginning of a frame.
of the text Send.
[F#] Frame Number Frame Number is 0 to 7 of ASCII numbers. Its
purpose is to distinguish between sent frame and re-
send frames. This 1-digit number is sent immediately
after STX characters. The Frame Number begins with
1 when the Forwarding Status starts, and increases
sequentially, every time a new frame is sent and a
positive reply is received.
The Frame Number returns to 0 after 7, and the
above steps are repeated.
[ TEXT ] Message Text Employ ASTM E1394-91 Record.
(Refer to explanation of Refer to the Message Format in the later section for
ASTM E1238-94) details.
[EXT] Indicates the end of the The code to indicate the end of the final frame.
text Send.
[CHK1] Express with 0 to F Add text between [STX] and [ETX] in Binary. Then
[CHK2] characters. take the last 8 bits and express it in Hexadecimal (2
digits). Then, change the 2-digit number into 0 to F
ASCII character format, and save each digit as CHK1
and CHK2.
[CR] The ASCII Code for Code required before completing an E1394-91 Record
Recovery. (E1381-91 Message) or code that is sent between the
2nd and last within a frame.
[LF] ASCII Code for line LF Code is used for the last character of a frame. LF
changes. cannot be used for Text messages.

3 Note:
Timeout:
1. In Setting Status, the Sending side sets a 15-second timer
June 2014 - Version 8.0

when sending [ENQ]. If there is no response within the 15

seconds, Timeout is applied. The Sending side turns to an
End Status when Timeout occurs.

Sysmex - Universal Interface SUIT 6

SUIT Interface

2. In Forwarding Status, the Sending side sets a 15 seconds

timer after sending the last character of a frame.
If there is no response within the 15 seconds, Timeout is
applied. The Sending side turns to End Status once the
Timeout occurs.
The Receiving side sets the timer for 30 seconds when it
first turns to the Receiving Status or responding to a frame.
If there is no response within 30 seconds, Timeout is
applied. The Receiving side turns to the End Status when
the Timeout occurs.
Restricted message codes:
Please find below 10 Transmission Restricted Message
Codes. These (1 type of Format Restriction Code & 4 types
of Instrument Restricted Codes) cannot be used for
message Text:

Restricted Message Codes

Code Symbol Meaning

SOH (01) Beginning of Header
STX (02) Beginning of Text Sending
ETX (03) End of Text Sending
EOT (04) End of Sending
ENQ (05) Inquiry
ACK (06) Positive Response
DLE (10) Lost Data Link
NAK (15) Negative Response
SYN (16) Simultaneous Signal characters
ETB (17) End of Sending Block
LF (0A) Change lines
DC1 (11) Instrument Restricted Character 1
DC2 (12) Instrument Restricted Character 2
DC3 (13) Instrument Restricted Character 3
DC4 (14) Instrument Restricted Character 4

3.2.3 End Status

The Sending side sends [EOT] to indicate that all information

has been transmitted to the Receiving side, and turns to the
Idling Status.
Or the Receiving side sends [EOT] when the time out occurs,
and turns to the Idling status. In order for the Sending Side to
June 2014 - Version 8.0

start transfer again, turns to the Setting Status.

7 Sysmex - Universal Interface SUIT

 SUIT Interface

3.3 Protocol

3.3.1 SUIT HOST (Test Order)

Com.
SUIT HOST
Direction
ENQ
ACK
H: Header Record
ACK
P: Patient Record
Repeat
ACK as many
C: Patient Comment Record times as
ACK the No. of
OBR: Order Record patients
ACK
C: Order Comment Record
ACK
L: End Mark Record
ACK
EOT

3 Note:
SUIT saves the Patient Comment Record in Patient
Free Comment and Order Comment Record in Order
Free Comment
Discipline Separation:
In the event of a laboratory receiving two specimens (
e.g. 1x EDTA for Haematology and 1x Sodium Citrate
for Coagulation) on a single patient, requiring tests for
both haematology and coagulation on a single sample
number, the downloaded order information from LIS,
must be separated into the various disciplines.
It is possible for the orders to be sent in the same data
string, but the different discipline tests need to have
separate patient and order records.
Refer a log file example at chapter 5.2.3 Order for
multiple discipline.
June 2014 - Version 8.0

Sysmex - Universal Interface SUIT 8

SUIT Interface

3.3.2 SUIT HOST (Test Results)

Com.
SUIT HOST
Direction
ENQ
ACK
H: Header Record
ACK
P: Patient Record
Repeat as ACK
many times C: Patient Comment Record
as the No. ACK
of samples OBR: Order Record
ACK
C: Order Comment Record
ACK
OBX: Test Result Record
ACK
C: Result Comment Record
ACK
L: End Mark Record
ACK
EOT

3
SUIT sets:
Note:

the Patient Comment Record in the Patient Free Comment

Order Comment Record in the Order Free Comment
Sample Free Comment, IP Message (incl. Rule Message)
and Graphic Data information (File Name) in the Result
Comment Record

3.3.3 SUIT HOST (Order Inquiry)

SUIT Com. Direction HOST

ENQ
ACK
H: Header Record
ACK
Q: Inquiry Record
June 2014 - Version 8.0

ACK
L: End Mark Record
ACK
EOT

9 Sysmex - Universal Interface SUIT

 SUIT Interface

3.3.4 SUIT HOST (Order Command)

Same as 3.3.1

3.3.5 SUIT HOST (QC Data)

SUIT Com. Direction HOST

ENQ
ACK
H: Header Record
ACK
S: QC Record
ACK
L: End Mark Record
ACK
EOT

3 Note:
No output available for IP Messages, Graphic Data or for
QC Data.
June 2014 - Version 8.0

Sysmex - Universal Interface SUIT 10

Message Format

Message Format

4 Message Format

4.1 Message and Record

SUIT employs ASTM E1238-94 Record for Text (messages) to
be forwarded with an ASTM E1381-91 frame.

4.1.1 Record

The Record is a type of Text beginning with ASCII (alphabet

code) called Record Descriptor, and ending with [CR]

Record Original Reference

Segment Description
Descriptor Location
Message Header H Section 7 Information Exchange
Management Information
Patient Segment P Section 8 Patient Information
Observation OBR Section 9 Test Order Information
Order Segment
Result Observation OBX Section 10 Test Result Information
Segment
Error Checking E Section 11 Do not use
Segment
Comment Segment C Section 12 Comment Information
Request Results Q Section 13 Order Inquiry
Segment
Message Terminator L Section 14 Message End
Scientific Segment S Section 15 Scientific Information (Used
for QC Data Output)

4.1.2 Fields

The Record can be separated into several fields by separators.

The fields are distinguished by their position in the record.
Field lengths are not fixed. The following are types of
separators:

Separator Type Symbol Description

Field | Distinguish between fields within records.
- When there is no contents in a field, send the
separator only.
Repeat ~ Use to distinguish a repeated/multiple same type of
information within a field.
Component ^ Divide a field into several sub-fields.
June 2014 - Version 8.0

Sub-component & Defined only in Header. Not used as separator.

Escape \ Defined only in Header. Not used as separator.

11 Sysmex - Universal Interface SUIT

 Message Format

4.2 Header Record

Header Records include definitions of separators, Version
Information, and the Message Created Date etc.
(Record Format)
H | ^ ~ \ & | | | | | | | | | | | VER | DT<CR>
(1) (2) (3) (4) (5)

3 Note:
Mandatory Fields described in Bold Text
Field HOST HOST
Field Field
Field Description Length to from
Code Name
(bytes) SUIT SUIT
(1) Segment H fixed
H H-1 1 Y Y
type ID
(2) Delimiter Definition of Separators
definition | : Field Separator (7Ch)
^ : Component Separator (5Eh)
^~\& H-2 ~: Repeat Symbol (7Eh) 5 Y Y
\: Escape Symbol (5Ch)
&:Sub-component Separator (26h)
- \ and & Not used.
(3) H-3 Not in use
- - -
H-12
(4) Version Regulated Version Number
VER H-13 3 Y Y
A.2 Fixed (ASTM E1238-94)
(5) Date and Message Created Date/Time
DT H-14 time of Format:YYYYMMDDHHMM 12 Y Y
message
Mandatory Fields: H-1, H-2, H-13, H-14
June 2014 - Version 8.0

Sysmex - Universal Interface SUIT 12

Message Format

4.3 Patient Record

Patient Record includes Patient Attribute Information.
(Record Format)
P | SEQ | PID | | APID | NAME | MN | B/D | SEX | | | | | DCODE | | | HT | WT
(1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11) (12) (13) (14)
| | | | | | | ADMS | LC | | | | | | | DTR <CR>
(15) (16) (17) (18) (19)

3 Note:
Mandatory Fields described in Bold Text
Field HOST HOST
Field
Field Field Name Description Length to from
Code
(bytes) SUIT SUIT
(1) P P-1 Segment P Fixed.
1 Y Y
type ID
(2) SEQ P-2 Trans- Sequence Number.
mission Sequential from 1 and increase
4 Y Y
sequence by one per patient.
number
(3) PID P-3 Practice Patient ID.
assigned 16 Y Y
patient ID
(4) P-4 Not in use - -
(5) APID P-5 Alter-native Alternative ID.
16 Y Y
patient ID Use as Public Insurance ID.
(6) NAME P-6 Patient Patient Name FN^LN
name 41
FN : First Name Y Y
(20^20)
LN : Last Name
(7) MN P-7 Mother's Mothers Maiden Name
Maiden 20 Y Y
name
(8) B/D P-8 Birth Date Date of Birth
8 Y Y
Format: YYYYMMDD
(9) SEX P-9 Patient sex Gender
M: Male, 1 Y Y
F: Female,
U: Unknown
(10) P-10 Not in use
- - -
P-13
(11) DCODE P-14 Attending Primary Doctor Code/Doctor 27
Y Y
physician ID Name (6^20)
June 2014 - Version 8.0

(12) P-15 Not in use

- - -
P16

13 Sysmex - Universal Interface SUIT

 Message Format

(13) HT P-17 Patient Height:

height cm (w/ decimals) 6 Y Y
or
feet^inch
(14) WT P-18 Patient Weight:
weight kg (w/ decimals) 6 Y Y
or
pound^ounce
(15) P-19 Not in use
- - -
P-24
(16) ADMS P-25 Admission In/Out Patient Differentiation
status 2 Y Y
OP:Out Patient, IP:In Patient
(17) LC P-26 Location Location: 13
Y Y
Clinic Code^Ward Code (6^6)
(18) P-27 Not in use
- - -
P-32
(19) DTR P-33 Date/time Data Registration Date
registered (Patient Data/Latest Update 8 Y Y
Date)
Format:YYYYMMDD
Mandatory Fields: P-1, P-2
June 2014 - Version 8.0

Sysmex - Universal Interface SUIT 14

Message Format

4.4 Order Record

Order Record includes Test Order Information. Multiple order
items are included in a record by using component Separators.
Pay attention to 3.3.1, Discipline Separation.
(Record Format)
OBR | SEQ | ONO | SNO | TESTID | PRI | RQDT | CLDT | | CVLM | | ACCD | DGCD
(1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11) (12) (13)

RCINF | RCDT | SRC | | | | | | | DTR | | PSID| | S<CR>

(14) (15) (16) (17) (18) (19) (20) (21)(22)

3 Note:
Mandatory Fields described in Bold Text
Field HOST HOST
Field
Field Field Name Description Length to from
Code
(bytes) SUIT SUIT
Segment OBR Fixed.
(1) OBR OBR-1 3 Y Y
type ID
Sequence Number
Sequence
(2) SEQ OBR-2 Sequential per OBR record in 4 Y Y
number
the Patient segment
Requester Sample No. (Barcode No.)*
specimen ID (HOST side)
(3) ONO OBR-31 Y N
or accession 29
number
Producer Sample No. (Barcode No.)*
specimen ID (SUIT side)
(4) SNO OBR-4 N Y
or accession 29
number
Test Item
Code^Name
When ordering multiple orders,
use the Repeat character, ~,
to proceed as below:
Code1^Name1~Code2^Name2
~Code3^Name3 ~
If OBR-5 is too long, the part
Observation that exceeded 200 characters
(5) TESTID OBR-5 200 Y Y
battery ID cannot be registered. When it
is over 200, it has to send the
order twice for one sample.
E.g. if the length becomes 300
bytes, separate it ex. 200+100
June 2014 - Version 8.0

or 150+150 and so on.

E.g. H, P, OBR, P, OBR, L
E.g. H, P, OBR(ETB),
OBR(ETX), L

15 Sysmex - Universal Interface SUIT

 Message Format

Processing Priority Level:

(6) PRI OBR-6 Priority 1 Y Y
S: STAT / Urgent
Requested Not in use
(7) OBR-7 - -
date-time
Specimen Sample Collection Date/Time
collection or Format:YYYYMMDDHHMM
(8) CLDT OBR-8 12 Y Y
observation
date-time
observation Not in use
(9) OBR-9 - -
end-time
Collection Collection Volume (Urine etc.):
(10) CVLM OBR-10 5 Y Y
volume Unit ml
(11) OBR-11 CollectorID Not in use - -
Order Process Code
<For New Samples>
Register with the following:
A: Add the ordered
L: Lab. To obtain a sample
(12) ACCD OBR-12 Action code 1 Y N
<For Registered Samples>
A: Clear registered order(s),
register the order as new.
L: Add orders
(13) OBR-13 Danger code Not in use.
Patient Comment, Sample
Relevant Comment
(14) RCINF OBR-14 clinical The code for Patient Comment 48 Y Y
information 1~2~3~4~5^the code for
Sample Comment1~2
Date and
time of Registration Date/Time
(15) RCDT OBR-15 12 Y Y
specimen Format: YYYYMMDDHHMM
receipt
Tube Type Code, Collection
Source Code
Tube Type 1^Collection
Source~
Tube Type 2^Collection
Source of
(16) SRC OBR-16 Source~ . 98 Y Y
specimen
Tube Type 9^Collection Source

(Note) SUIT saves the

Collection source of Tube Type
1 only.
June 2014 - Version 8.0

Sysmex - Universal Interface SUIT 16

Message Format

OBR-17
(17) - Not in use - -
OBR-22
Date and
time
observation Report (Update) Date/Time
(18) DTR OBR-23 12 N Y
reported Format:YYYYMMDDHHMM
or status
changed
Producer's
(19) OBR-24 Not in use - -
Change
Producer's
(20) PSID OBR-25 Testing Section ID 3 N Y
section ID
OBR-26
(21) - Not in use - -
OBR-27
Quantity-
(22) QT OBR-28 Order Comment Code 6 Y Y
Timing
1.
Refer chapter 5.5 Appendix E: Optional specification of OBR-3 management

3 Note:
Mandatory Fields: OBR-1, OBR-2, OBR-3, OBR-5, OBR-12,
OBR-15.

June 2014 - Version 8.0

17 Sysmex - Universal Interface SUIT

 Message Format

4.5 Test Result Record

Test Result Record includes information on the received
results.
(Record Format)
OBX | SEQ | VTYPE | OBID | | OBVAL | UNT | | AFLG | | | ORST | DT | | | | RSPS<C
(1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11) (12) (13) (14)

Field HOST HOST

Field
Field Field Name Description Length to from
Code
(bytes) SUIT SUIT
(1) OBX OBX-1 Segment OBX Fixed
type ID 3 N Y
(2) SEQ OBX-2 Sequence Sequence Number.
number Sequential per OBX Record in 4 N Y
the Order Segment.
(3) VTYPE OBX-3 Value type Test Result Data format
ST:Characters
2 N Y
NM:Numeric Value
CE:Code
(4) OBID OBX-4 Observation Test Item 61
identifier N Y
Code^Name (30^30)
(5) OBX-5 Not in use - -
(6) OBVAL OBX-6 Observation Test Result^Result Comment
value Code1^Dilution ratio
The Dilution ratio is optional
and not supported by any
configuration
E.g these examples are
equivalent:
10 106
10^tel (100^3^ N Y
1)
10^tel^
10^tel^1
10^^1
Be prepared for all varieties
(When the test results are Test
Comment, set the Test
Comment Code)
(7) UNT OBX-7 Units Unit (optional) 10 N Y
(8) OBX-8 Not in use - -
June 2014 - Version 8.0

1.
W is set:
- when WBC, LYMPH# and LYMPH% are compensated by NRBC,
- NEUT# and NEUT% are compensated by IG or NRBC or
- WBC is reported by using WBC-D and PLT is reported by using PLT-O.

Sysmex - Universal Interface SUIT 18

Message Format

(9) AFLG OBX-9 Abnormal Abnormal Value Flag:

flags Upper/Lower Flag
~ Delta Check Flag
L : Low
H : High
5
LL : Panic low N Y
(2~2)
HH : Panic high
> : out if linearity
W : low reliability
A : Abnormal (Except numeric
value data)
(10) OBX-10 Not in use
- - -
OBX-11
(11) ORST OBX-12 Observation Test Result Status
result status ^ Latest Operation
Test Result Status:
P: Preliminary Report
F: Final Result
I: Pending
C: Revision Report 22
N Y
(1^20)
Latest Operation:
Edit : input or edit
Validate : manual validate
Count : count at pad menu
Manual Send : send manually
(N/A) : others
(12) DT OBX-13 Date/Time Sending Date/Time
of last Format:YYYYMMDDHHMM
change in
12 N Y
normal
value or
units
(13) OBX-14 Not in use
- - -
OBX-16
(14) RSPS OBX-17 Responsible Latest Operator ID
Observer 6 N Y
June 2014 - Version 8.0

19 Sysmex - Universal Interface SUIT

 Message Format

4.6 Comment Record

Comment Record includes the comments for the previous P,
OBR, or OBX Record.
In case of following a P-Record, valid for SUIT Patient Free
Comments.
In case of following an OBR-Record, valid for SUIT Order Free
Comments.
In the case of following an OBX Record, valid for Sample Free
Comments, IP Message, Graphic Data Information (File
Name).
(Record Format)
C | SEQ | | CMT <CR>
(1) (2) (3) (4)

Field HOST HOST

Field
Field Field Name Description Length to from
Code
(bytes) SUIT SUIT
Segment type
(1) C C-1 C Fixed 1 Y Y
ID
Sequence Sequence Number.
(2) SEQ C-2 2 Y Y
number Sequential per C Record.
(3) C-3 Not in use - -

(4) CMT C-4 Comment text Comment Contents 100 Y Y

To supply the LIMS with the graphical data of the analyzers,

SUIT is transmitting the filename to host by using a C-Record.
For more details refer to chapter 5.1 Appendix A
June 2014 - Version 8.0

Sysmex - Universal Interface SUIT 20

Message Format

4.7 Order Inquiry Record

In ASTM1238-94, this is used for Previous Order Information
and Result Information Inquiry; however for SUIT this is used
for the Query (Order Inquiry)
(Record Format)
Q | SEQ | | PROPID | | | DT <CR>
(1) (2) (3) (4) (5) (6)

Field HOST HOST

Field
Field Field Name Description Length to from
Code
(bytes) SUIT SUIT
Segment
(1) Q Q-1 Q Fixed 1 N Y
type ID
Sequence
(2) SEQ Q-2 Sequence Number: 1 - 9999 4 N Y
number
Requestor
(3) Q-3 Assigned Not in use - -
patient ID
Producer
(4) PROPID Q-4 assigned Sample No.~ Sample No.~.. 200 N Y
patient ID
Q-5
(5) - Not in use - -
Q-6
Registration Date/Time
Nature of
Format:YYYYMMDDHHMM
(6) DT Q-7 request 12 N Y
(SUIT sets the Registration
time limits
Date) June 2014 - Version 8.0

21 Sysmex - Universal Interface SUIT

 Message Format

4.8 Scientific Information Record

(Record Format)
S | SEQ | METH | INST | | | QC | | | | SID | ANA | RESULT | | | DT<CR>
(1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11) (12)

Field HOST HOST

Field
Field Field Name Description Length to from
Code
(bytes) SUIT SUIT
Segment
(1) S S-1 S Fixed 1 N Y
type ID
Sequence
(2) SEQ S-2 Sequence Number: 1 9999 4 N Y
number

Analytical Mode:
(3) METH S-3 10 N Y
Method Manual or Closed

Instrumentat Analyzer Name or Instrument

(4) INST S-4 10 N Y
ion ID
S-5
(5) - Not in use - -
S-6
Quality
(6) QC S-7 QC Fixed 2 N Y
Control
S-8
(7) - Not in use - -
S-10
Lot Number of Control
(8) SID S-11 Specimen ID 10 N Y
Reagent

(9) ANA S-12 Analytic Analysis Item Name 8 N Y

(10) RESULT S-13 Result QC Data 8 N Y

S-14
(11) - Not in use - -
S-15
Analysis
Measurement Date/Time
(12) DT S-16 Date and 12 N Y
YYYYMMDDHHMM
time
June 2014 - Version 8.0

Sysmex - Universal Interface SUIT 22

Message Format

4.9 End Mark Record

(Record Format)
L | SEQ | | PCNT | LCNT <CR>
(1) (2) (3) (4) (5)

3 Note:
Mandatory Fields described in Bold Text

Field HOST HOST

Field
Field Field Name Description Length to from
Code
(bytes) SUIT SUIT
Segment
(1) L L-1 L Fixed 1 Y Y
type ID
Sequence
(2) SEQ L-2 Sequence Number: 1 1 Y Y
number

(3) L-3 Not in use - -

Patient Total number of P Records

(4) PCNT L-4 4 Y Y
count in message.
Total number of records,
(5) LCNT L-5 Line count (end with <CR>), in 10 Y Y
message.
Mandatory Fields: L-1, L-2, L-4, L-5.

June 2014 - Version 8.0

23 Sysmex - Universal Interface SUIT

June 2014 - Version 8.0
Message Format

Sysmex - Universal Interface SUIT 24

 Appendixes

Appendixes

5 Appendixes

5.1 Appendix A: Information concerning the graphic-files management

Depending on the analyzer or solution type, SUIT is using two
kinds of filenames for the graphic-files: BMP-Files or PNG-
Files. Be prepared for both types and wait for our confirmation
which file type has to be implemented at the respective
installation site.

5.1.1 Case that SUIT supplies bmp-files

In this case the protocol will transmit only the filename. The
host has to cut the files out of a specified shared folder. To
distinguish between other C-Records the host can use the
leading @ as a trigger.
Example of file name:
4C|9||@DPL-52000000002.BMP[0DH][ETX]70[0DH][0AH]
Refer more log file examples at chapter 5.3.5.
The graphics listed below are possible:
Scatter Type Scatter Data Type Basic size Section Prefix 256 Color File 24bit Color File
size (byte) size (byte)
1 Scatter 01 3Diff 128*128 Hematology @3DI 17,462 49,206
02 IMI 128*128 Hematology @IMI 17,462 49,206
03 Ret 128*128 Hematology @RET 17,462 49,206
04 Diff 128*128 Hematology @DIF 17,462 49,206
05 WBC/BASO 128*128 Hematology @WBC 17,462 49,206
06 Ret-Ext 128*128 Hematology @REX 17,462 49,206
07 PLT-O 128*128 Hematology @PLT 17,462 49,206
08 NRBC 128*128 Hematology @NRB 17,462 49,206
09 CD4 128*128 Hematology @CD4 17,462 49,206
10 RET-E 128*128 Hematology @REX 17,462 49,206
20 Fl2-Fsc 256*128 Urinalysis @FL2 33,846 98,358
21 Fscw-Flw 256*128 Urinalysis @FSC 33,846 98,358
22 Fl-Fsc 128*128 Urinalysis @FSF 17,462 49,206
23 Fscw-Fl 128*128 Urinalysis @FLF 17,462 49,206

2 Histogram 01 WBC 128*64 Hematology @DWB 9,270 24,630

02 RBC 128*64 Hematology @DRB 9.270 24.630
03 PLT 128*64 Hematology @DPL 9,270 24,630
04 EO 128*64 Hematology @EO_ 9,270 24,630
05 BASO 128*64 Hematology @BAS 9,270 24,630
06 RetX 128*64 Hematology @REX 9,270 24,630
07 RetY 128*64 Hematology @REY 9,270 24,630
June 2014 - Version 8.0

08 CD4X 128*64 Hematology @C4X 9,270 24,630

09 CD4Y 128*64 Hematology @C4Y 9,270 24,630
10 RBC-Y 128*64 Hematology @RBCY 9,270 24,630
20 RBC-FSC 150*75 Urinalysis @RGF 12,478 33,954
21 WBC-FSC 150*75 Urinalysis @WBF 12,478 33,954

25 Sysmex - Universal Interface SUIT

 Appendixes

5.1.2 Case that SUIT supplies png files

In this case SUIT is sending the graphics including the

subfolders as png. The character string &r& in the name is
representing a \ .
To distinguish between other C-Records you have to use the
leading png as a trigger.
Cut out these files from the specified location.

Example:
1C|3||PNG&R&20050627&R&2005_06_27_14_54_8205026_
WBC_BASO.PNG[#13][#3]5A[#13][#10]

Refer log file example at chapter 5.3.4.

The following graphics are available:
Scatter Type Scatter Data Type Basic size Section Prefix 256 Color File 24bit Color
size (byte) File size (byte)
1 Histogram 01 RBC-Y Hematology PNG
Histogram 02 RBC Hematology PNG
Histogram 03 PLT Hematology PNG
Histogram 04 WDF(FSC) Hematology PNG
Histogram 05 RBC(FSC) Hematology PNG
Histogram 06 RBC(NORMAL) Hematology PNG
Histogram 07 PLT(NORMAL) Hematology PNG
Scatter 08 WBC_BASO Hematology PNG
Scatter 09 PLT_O Hematology PNG
Scatter 10 DIFF Hematology PNG
Scatter 11 IMI Hematology PNG
Scatter 12 NRBC Hematology PNG
Scatter 13 RET Hematology PNG
Scatter 14 RET_EXT Hematology PNG
Scatter 15 WDF Hematology PNG
Scatter 16 WNR Hematology PNG
Scatter 17 WPC Hematology PNG
Scatter 18 PLT-F Hematology PNG
Scatter 19 WDF-E Hematology PNG
Scatter 20 WNR(SFL-SSC) Hematology PNG
Scatter 21 WNR(SSC-FSC) Hematology PNG
Scatter 22 WNR(FSCW-FSC) Hematology PNG
Scatter 23 WDF(SSC-FSC) Hematology PNG
Scatter 24 WDF(FSC-SFL) Hematology PNG
Scatter 25 WDF(FSCW-FSC) Hematology PNG
Scatter 26 RET(SFL-SSC) Hematology PNG
Scatter 27 RET(SSC-FSC) Hematology PNG
Scatter 28 RET(FSCW-FSC) Hematology PNG
Scatter 29 PLT-F(SFL-SSC) Hematology PNG
Scatter 30 PLT-F(SSC-FSC) Hematology PNG
June 2014 - Version 8.0

Scatter 31 PLT-F(FSCW-FSC) Hematology PNG

Scatter 32 WPC(SSC-FSC) Hematology PNG
Scatter 33 WPC(FSC-SFL) Hematology PNG
Scatter 34 WPC(FSCW-FSC) Hematology PNG

Sysmex - Universal Interface SUIT 26

Appendixes

5.1.3 Summary of which image file type is generated depending on analyzer or solution type

Haematology Urinanalysis Coagulation WAM solution

devices stand devices stand devices stand SIS [TWIST/ELC]
alone alone alone
XN series: UF1000i CS-2000i SIS / TWIST /ELC:
- XN-1000 UF500i - XE series
- XN-2000
- XS series
- XN-3000
- XN-9000
- XT series
-----------------
- K-4500
XE series: - K-X21
- XE5000i --------------------
- XE2100 - DM8 & DM96
- XE2100D - Manual differentiation WP
----------------- ---------------------
XS series:
- UF50
- XS1000i
- XS800i - UF100
----------------- - UF100i
XT series: - UF500i
- XT2000i - UF1000i
- XT1800i - Dispstik reader:
Analyzer - XT4000i o Cobas U411
types / o Urisys 1800
Solution o Urisys 2400
type o Miditron M
o Clinitek Atlas
o Clinitek 200+
o AX-4280
o AX-4030
--------------------
- CA series:
o CA-500
o CA-6000
o CA-7000
- CS-2000i
---------------------
- VesCube
- STARSED
---------------------
- Tube Sorter:
o TS-500
o TS-1000
Graphic PNG files No image to host No image to PNG or BMP. Please wait of
June 2014 - Version 8.0

file type host our confirmation

27 Sysmex - Universal Interface SUIT

 Appendixes

5.2 Appendix B: Examples of Logfiles

5.2.1 Query for an order with an answer of LIS for a registered sample

S: [ENQ]
R: [ACK]
S: [STX]1H|^~\&| | | | | | | | | | | A.2|200508041245[CR][ETX]33[CR][LF]
R: [ACK]
S: [STX]2Q|1| | 995316031064| | | 200508041245[CR][ETX]7A[CR][LF]
R: [ACK]
S: [STX]3L|1| | 0|2[CR][ETX]12[CR][LF]
R: [ACK]
S: [EOT]

R: [ENQ]
S: [ACK]
R: [STX]1H|^~\&| | | | | | | | | | | A.2|200508041240[CR][ETX]2E[CR][LF]
S: [ACK]
R: [STX]2P|1|516| | | ^9953160310| | 19401028|F| | | | | | | | | | | | | | | | | | | | | | | | 20050804[CR]
[ETX]B4[CR][LF]
S: [ACK]
R: [STX]3OBR|1|995316031064| | WBC~RBC~HGB~HCT~MCV~MCH~PLT| | | 200508041240| | | | A|
| | 200508041240| | | | 2001| | | | | | | | | R|[CR][ETX]65[CR][LF]
S: [ACK]
R: [STX]4L|1| | 1|4[CR][ETX]16[CR][LF]
S: [ACK]
R: [EOT]

5.2.2 Query for an order with an answer of LIS for an unknown sample

S: [ENQ]
R: [ACK]
S: [STX]1H|^~\&| | | | | | | | | | | A.2|200508041211[CR][ETX]2C[CR][LF]
R: [ACK]
S: [STX]2Q|1| |1| | 200508041211[CR][ETX]35[CR][LF]
R: [ACK]
S: [STX]3L|1| | 0| 2[CR][ETX]12[CR][LF]
R: [ACK]
S: [EOT]

R: [ENQ]
S: [AC]
R: [STX]1H|^~\&| | | | | | | | | | | A.2|200508041206[CR][STX]30[CR][LF]
S: [ACK]
R: [STX]2P|1| | | | ^| | | | | | | | | | | | | | | | | | | | | | | | | | | 20050804[CR][STX]34[CR][LF]
S: [ACK]
R: [STX]3OBR|1|1| | | | | 200508041206| | | | A| | | 200508041206| | | | | | | | | | | | |
R|[CR][ETX]63[CR][LF]
June 2014 - Version 8.0

S: [ACK]
R: [STX]4L|1| | 1|4[CR][ETX]16[CR][LF]
S: [ACK]
R: [EOT]

Sysmex - Universal Interface SUIT 28

Appendixes

5.2.3 Order for multiple disciplines

R: [ENQ]
S: [ACK]
R: [STX]1H|^~\\| | | | | | | | | | | | 200702161054[0Dh][ETX]8F[CR][LF]
S: [ACK]
R: [STX]2P|1|LSW-124579| | |AJNOS^ADDOORW| | 19740508|M| | | | | .| | | | | | | | | | | |.[0Dh][ETX]72[CR][LF]
S: [ACK]
R: [STX]3C|1| | [0Dh][ETX]2B[CR][LF]
S: [ACK]
R: [STX]4OBR|1|07B00001| | RBC^~MCH^~MCHC^~PLT^~WBC^~| | |200702011003| | | | G| | |200702011428|
| | | | | | | | | | | | R[0Dh][ETX]2C[CR][LF]
S: [ACK]
R: [STX]5P|2|LSW-124579| | |AJNOS^ADDOORW| | 19740508|M| | | | | .| | | | | | | | | | | |.[0Dh][ETX]76[CR][LF]
S: [ACK]
R: [STX]6C|1| | [0Dh][ETX]2E[CR][LF]
S: [ACK]
R: [STX]7OBR|1|07B00001| | INR^~APTT^~DD^| | |200702011003| | | | G| | |200702011428| | | | | | | | | | | |
|R[0Dh][ETX]23[CR][LF]
S: [ACK]
R: [STX]0L|1| | 1|8[0Dh][ETX]16[CR][LF]
S: [ACK]
R: [EOT]

5.2.4 Result with graphical information in PNG-format

S: [ENQ]
R: [ACK]
S: S:[STX]1H|^~\&| | | | | | | | | | |A.2|200508041154[CR][ETX]32[CR][LF]
R: [ACK]
S: [STX]2P|1| | | |^| | |U| | | | | | | | | | | | | | | | |^ | | | | | | |[CR][ETX]54[CR][LF]
R: [ACK]
S: [STX]3C|1[CR][ETX]33[CR][LF]
R: [ACK]
S: [STX]4OBR|1| |840004804064| wbc~rbc~hgb~hct~mcv~mch~mchc~plt~neut%~lymph%~mono%~eo%
~baso%~ neut#~lymph#~mono#~eo#~baso#~rdw-sd~rdw-cv~pdw~mpv~p-lcr~pct~h_rack~h_tube~h_inid
~h_inst | | |200508041154| | | | | | |200508041154| | | | | | | |200508041154| |001| | | [CR][ETX]E1[CR][LF]
R: [ACK]
S: [STX]5C|1[CR][ETX]35[CR][LF]
R: [ACK]
S: [STX]6OBX|1|NM|WBC | |5.16^^1|10*3/uL | | | | |F^|200508041154 | | | |[CR][ETX]FE[CR][LF]
R: [ACK]
S: [STX]7OBX|2|NM|RBC | |5.23^^1|10*6/uL | |H | | |F^|200508041154 | | | |[CR][ETX]44[CR][LF]
R: [ACK]
S: [STX]0OBX|3|NM|HGB | |15.8^^1|g/dL | | | | |F^|200508041154 | | | |[CR][ETX]89[CR][LF]
R: [ACK]
S: [STX]1OBX|4|NM|HCT | |47.7^^1|% | | | | |F^|200508041154 | | | |[CR][ETX]7C[CR][LF]
R: [ACK]
S: [STX]2OBX|5|NM|MCV | |91.2^^1|fL | | | | |F^|200508041154 | | | |[CR][ETX]0C[CR][LF]
R: [ACK]
S: [STX]3OBX|6|NM|MCH | |30.2^^1|pg | | | | |F^|200508041154 | | | |[CR][ETX]1E[CR][LF]
R: [ACK]
S: [STX]4OBX|7|NM|MCHC | |33.1^^1|g/dL | | | | | | | | |F^|200508041154 | | | |[CR][ETX]D4[CR][LF]
R: [ACK]
S: [STX]5OBX|8|NM|PLT | |274^^1|10*3/uL | | | | |F^|200508041154 | | | |[CR][ETX]EB[CR][LF]
R: [ACK]
June 2014 - Version 8.0

S: [STX]6OBX|9|NM|NEUT% | |53.3^^1|% | | | | |F^|200508041154 | | | |[CR][ETX]01[CR][LF]

R: [ACK]
S: [STX]7OBX|10|NM|LYMPH% | |33.1^^1|% | | | | |F^|200508041154 | | | |[CR][ETX]74[CR][LF]
R: [ACK]

29 Sysmex - Universal Interface SUIT

 Appendixes

S: [STX]0OBX|11|NM|MONO% | |9.1^^1|% | | | | |F^|200508041154 | | | |[CR][ETX]F0[CR][LF]

R: [ACK]
S: [STX]1OBX|12|NM|EO% | |3.7^^1|% | | | | |F^|200508041154 | | | |[CR][ETX]4D[CR][LF]
R: [ACK]
S: [STX]2OBX|13|NM|BASO% | |0.8^^1|% | | | | |F^|200508041154 | | | |[CR][ETX]DE[CR][LF]
R: [ACK]
S: [STX]3OBX|14|NM|NEUT# | |2.75^^1|10*3/uL | | | | |F^|200508041154 | | | |[CR][ETX]B4[CR][LF]
R: [ACK]
S: [STX]4OBX|15|NM|LYMPH# | |1.71^^1|10*3/uL | | | | |F^|200508041154 | | | |[CR][ETX]FF[CR][LF]
R: [ACK]
S: [STX]5OBX|16|NM|MONO# | |0.47^^1|10*3/uL | | | | |F^|200508041154 | | | |[CR][ETX]B2[CR][LF]
R: [ACK]
S: [STX]6OBX|17|NM|EO# | |0.19^^1|10*3/uL | | | | |F^|200508041154 | | | |[CR][ETX]0E[CR][LF]
R: [ACK]
S: [STX]7OBX|18|NM|BASO# | |0.04^^1|10*3/uL | | | | |F^|200508041154 | | | |[CR][ETX]9B[CR][LF]
R: [ACK]
S: [STX]0OBX|19|NM|RDW-SD | |42.9^^1|fL | | | | |F^|200508041154 | | | |[CR][ETX]0D[CR][LF]
R: [ACK]
S: [STX]1OBX|20|NM|RDW-CV | |12.9^^1|% | | | | |F^|200508041154 | | | |[CR][ETX]78[CR][LF]
R: [ACK]
S: [STX]2OBX|21|NM|PDW | |13.2^^1|fL | | | | |F^|200508041154 | | | |[CR][ETX]39[CR][LF]
R: [ACK]
S: [STX]3OBX|22|NM|MPV | |10.7^^1|fL | | | | |F^|200508041154 | | | |[CR][ETX]45[CR][LF]
R: [ACK]
S: [STX]4OBX|23|NM|P-LCR | |29.5^^1|% | | | | |F^|200508041154 | | | |[CR][ETX]2D[CR][LF]
R: [ACK]
S: [STX]5OBX|24|NM|PCT | |0.29^^1|% | | | | |F^|200508041154 | | | |[CR][ETX]B3[CR][LF]
R: [ACK]
S: [STX]6OBX|25|NM|H_RACK | |1 | | | | | |F^ | | | | |[CR][ETX]8E[CR][LF]
R: [ACK]
S: [STX]7OBX|26|NM|H_TUBE | |1 | | | | | |F^ | | | | |[CR][ETX]9F[CR][LF]
R: [ACK]
S: [STX]0OBX|27|NM|H_INID | |11035 | | | | | |F^ | | | | |[CR][ETX]56[CR][LF]
R: [ACK]
S: [STX]1OBX|28|NM|H_INST | |XT-1800i | | | | | |F^ | | | | |[CR][ETX]83[CR][LF]
R: [ACK]
S: [STX]2C|1 | |PNG&R&20050804&R&2005_08_04_11_54_840004804064_PLT.PNG[CR][ETX]DF[CR][LF]
R: [ACK]
S: [STX]3C|2 | |PNG&R&20050804&R&2005_08_04_11_54_840004804064_RBC.PNG[CR][ETX]C8[CR][LF]
R: [ACK]
S: [STX]4C|3| |PNG&R&20050804&R&2005_08_04_11_54_840004804064_WBC_BASO.PNG[CR]
[ETX]53[CR][LF]
R: [ACK]
S: [STX]5C|4 | |PNG&R&20050804&R&2005_08_04_11_54_840004804064_DIFF.PNG[CR][ETX]0E[CR][LF]
R: [ACK]
S: [STX]6L|1 | |1|38[CR][ETX]4F[CR][LF]
R: [ACK]
S: [EOT]
June 2014 - Version 8.0

Sysmex - Universal Interface SUIT 30

Appendixes

Example of graphic-files in the explorer:

5.2.5 Result with graphical information in BMP-Format

S: [ENQ]
R: [ACK]
S: [STX]1H|^~\&| | | | | | | | | | |A.2|200510281531[CR][ETX]30[CR][LF]
R: [ACK]
S: [STX]2P|1|123456578| | |Lucky^Luke| | 19471212|M| | | | | D0003^Prof. James| | |0.0|0.0| | | | | | | | C0001^399|
| | | | | | 20051028[CR][ETX]EA[CR][LF]
R: [ACK]
S: [STX]3OBR|1| | 1^1|c^CBC~cd^CBC+DIFF|S| | 200510281503| | | | | | ~~~~^001~|200510281507|^29| | | | | | |
200510281531| | 001| | |1[CR][ETX]BC[CR][LF]
R: [ACK]
S: [STX]4OBX|1|NM|H_RACK^RACK| | 1^| | | | | | F^Manual Send|200510281531| | | | SIS [CR][ETX]E6[CR][LF]
R: [ACK]
S: [STX]5OBX|2|NM|H_TUBE^TUBE| | 1^| | | | | | F^Manual Send|200510281531| | | | SIS [CR][ETX]06[CR][LF]
R: [ACK]
S: [STX]6OBX|3|ST|H_INST^Inst.| | XE-2100^| | | | | | F^Manual Send|200510281531| | | | SIS
[CR][ETX]1A[CR][LF]
R: [ACK]
S: [STX]7OBX|4|ST|H_INID^Analyzer| | A3627^| | | | | | F^Manual Send|200510281531| | | | SIS
[CR][ETX]02[CR][LF]
R: [ACK]
S: [STX]0OBX|5|NM|WBC^WBC| | 5.88^|10^3/uL| | | | | F^Manual Send|200510281531| | | | SIS
[CR][ETX]39[CR][LF]
R: [ACK]
S: [STX]1OBX|6|NM|RBC^RBC| | 4.82^|10^6/uL| | | | | F^Manual Send|200510281531| | | | SIS
[CR][ETX]2D[CR][LF]
R: [ACK]
S: [STX]2OBX|7|NM|HGB^HGB| | 15.1^|g/dl| | | | | F^Manual Send|200510281531| | | | SIS [CR][ETX]9D[CR][LF]
R: [ACK]
June 2014 - Version 8.0

31 Sysmex - Universal Interface SUIT

 Appendixes

S: [STX]3OBX|8|NM|HCT^HCT| | 45.4^|%| | | | | F^Manual Send|200510281531| | | | SIS [CR][ETX]80[CR][LF]

R: [ACK]
S: [STX]4OBX|9|NM|MCV^MCV| | 94.0^|fL| | | | | F^Manual Send|200510281531| | | | SIS [CR][ETX]1D[CR][LF]
R: [ACK]
S: [STX]5OBX|10|NM|MCH^MCH| | 30.0^|pg| | | | | F^Manual Send|200510281531| | | | SIS [CR][ETX]45[CR][LF]
R: [ACK]
S: [STX]6OBX|11|NM|MCHC^MCHC| | 33.2^|g/dl| | | | | F^Manual Send|200510281531| | | | SIS
[CR][ETX]61[CR][LF]
R: [ACK]
S: [STX]7OBX|12|NM|PLT^PLT| | 224^|10^3/uL| | | | | F^Manual Send|200510281531| | | | SIS
[CR][ETX]5B[CR][LF]
R: [ACK]
S: [STX]0OBX|13|NM|RDW-SD^RDW-SD| | 44.7^|fL| | | | | F^Manual Send|200510281531| | | | SIS
[CR][ETX]DC[CR][LF]
R: [ACK]
S: [STX]1OBX|14|NM|RDW-CV^RDW-CV| | 13.0^|%| | | | | F^Manual Send|200510281531| | | | SIS
[CR][ETX]4A[CR][LF]
R: [ACK]
S: [STX]2OBX|15|NM|PDW^PDW| | 12.4^|fL| | | | | F^Manual Send|200510281531| | | | SIS [CR][ETX]4C[CR][LF]
R: [ACK]
S: [STX]3OBX|16|NM|MPV^MPV| | 10.8^|fL| | | | | F^Manual Send|200510281531| | | | SIS [CR][ETX]60[CR][LF]
R: [ACK]
S: [STX]4OBX|17|NM|P-LCR^P-LCR| | 31.5^|%| | | | | F^Manual Send|200510281531| | | | SIS
[CR][ETX]AB[CR][LF]
R: [ACK]
S: [STX]5OBX|18|NM|PCT^PCT| | 0.24^|%| | | | | F^Manual Send|200510281531| | | | SIS [CR][ETX]BC[CR][LF]
R: [ACK]
S: [STX]6OBX|19|NM|NEUT#^NEUT#| | 3.33^|10^3/[B5h]l| | | | | F^Manual Send|200510281531| | | | SIS
[CR][ETX]CE[CR][LF]
R: [ACK]
S: [STX]7OBX|20|NM|NEUT%^NEUT%| | 56.7^|%| | | | | F^Manual Send|200510281531| | | | SIS
[CR][ETX]B7[CR][LF]
R: [ACK]
S: [STX]0OBX|21|NM|IG%^IG%| | 0.0^| | | | | | F^Manual Send|200510281531| | | | SIS [CR][ETX]F2[CR][LF]
R: [ACK]
S: [STX]1OBX|22|NM|IG#^IG#| | 0.00^| | | | | | F^Manual Send|200510281531| | | | SIS [CR][ETX]20[CR][LF]
R: [ACK]
S: [STX]2OBX|23|NM|LYMPH#^LYMPH#| | 2.03^|10^3/[B5h]l| | | | | F^Manual Send|200510281531| | | | SIS
[CR][ETX]5D[CR][LF]
R: [ACK]
S: [STX]3OBX|24|NM|LYMPH%^LYMPH%| | 34.5^|%| | | | | F^Manual Send|200510281531| | | | SIS
[CR][ETX]4D[CR][LF]
R: [ACK]
S: [STX]4OBX|25|NM|MONO#^MONO#| | 0.32^|10^3/[B5h]l| | | | | F^Manual Send|200510281531| | | | SIS
[CR][ETX]BF[CR][LF]
R: [ACK]
S: [STX]5OBX|26|NM|MONO%^MONO%| | 5.4^|%| | | | | F^Manual Send|200510281531| | | | SIS
[CR][ETX]7C[CR][LF]
R: [ACK]
S: [STX]6OBX|27|NM|EO#^EO#| | 0.16^|10^3/[B5h]l| | | | | F^Manual Send|200510281531| | | | SIS
[CR][ETX]7B[CR][LF]
R: [ACK]
June 2014 - Version 8.0

Sysmex - Universal Interface SUIT 32

Appendixes

S: [STX]7OBX|28|NM|EO%^EO%| | 2.8^|%| | | | | F^Manual Send|200510281531| | | | SIS [CR][ETX]37[CR][LF]

R: [ACK]
S: [STX]0OBX|29|NM|BASO#^BASO#| | 0.04^|10^3/[B5h]l| | | | | F^Manual Send|200510281531| | | | SIS
[CR][ETX]96[CR][LF]
R: [ACK]
S: [STX]1OBX|30|NM|BASO%^BASO%| | 0.6^|%| | | | | F^Manual Send|200510281531| | | | SIS
[CR][ETX]48[CR][LF]
R: [ACK]
S: [STX]2C|1| | @DIF-2005_10_28_15_31_44_00000001.BMP[CR][ETX]F6[CR][LF]
R: [ACK]
S: [STX]3C|2| | @WBC-2005_10_28_15_31_44_00000001.BMP[CR][ETX]01[CR][LF]
R: [ACK]
S: [STX]4C|3| | @IMI-2005_10_28_15_31_44_00000001.BMP[CR][ETX]06[CR][LF]
R: [ACK]
S: [STX]5C|4| | @RET-2005_10_28_15_31_44_00000001.BMP[CR][ETX]14[CR][LF]
R: [ACK]
S: [STX]6C|5| | @PLT-2005_10_28_15_31_44_00000001.BMP[CR][ETX]1B[CR][LF]
R: [ACK]
S: [STX]7C|6| | @REX-2005_10_28_15_31_44_00000001.BMP[CR][ETX]1C[CR][LF]
R: [ACK]
S: [STX]0C|7| | @NRB-2005_10_28_15_31_44_00000001.BMP[CR][ETX]09[CR][LF]
R: [ACK]
S: [STX]1C|8| | @DRB-2005_10_28_15_31_44_00000001.BMP[CR][ETX]01[CR][LF]
R: [ACK]
S: [STX]2C|9| | @DPL-2005_10_28_15_31_44_00000001.BMP[CR][ETX]0B[CR][LF]
R: [ACK]
S: [STX]3L|1| | 1|43[CR][ETX]48[CR][LF]
R: [ACK]
S: [EOT]

Example of graphic-files in the explorer.

June 2014 - Version 8.0

33 Sysmex - Universal Interface SUIT

 Appendixes

5.2.6 Quality Control log files

There are two methods to send a quality control results from

the analyzer to the host.
Method 1:
One method is that the user is sending the quality control out
of the IPUs sample explorer. In this case the sample will get
the lot number of the actual QC as sample number.
E.g.: QC-51470801
For each parameter the analyzer-id and the measurement-
mode is transmitted, too.
S: [ENQ]
R: [ACK]
S: [STX]1H|^~\&| | | | | | | | | | |A.2|200506271532[CR][ETX]35[CR][LF]
R: [ACK]
S: [STX]2S|1|Manual|A2424| | | QC| | | | QC-51470801|WBC|2.27| | | 20050627153202|[CR][ETX]C8[CR][LF]
R: [ACK]
S: [STX]3S|2|Manual|A2424| | | QC| | | | QC-51470801|RBC|2.30| | | 20050627153202|[CR][ETX]BF[CR][LF]
R: [ACK]
S: [STX]4S|3|Manual|A2424| | | QC| | | | QC-51470801|HGB|6.0| | | 20050627153202|[CR][ETX]8C[CR][LF]
R: [ACK]
S: [STX]5S|4|Manual|A2424| | | QC| | | | QC-51470801|HCT|17.6| | | 20050627153202|[CR][ETX]D4[CR][LF]
R: [ACK]
S: [STX]6S|5|Manual|A2424| | | QC| | | | QC-51470801|MCV|76.5| | | 20050627153202|[CR][ETX]E1[CR][LF] | | |
| R: [ACK]
S: [STX]1S|16|Manual|A2424| | | QC| | | | QC-51470801|MONO#|0.24| | |
20050627153202|[CR][ETX]78[CR][LF]
R: [ACK]
S: [STX]2S|17|Manual|A2424| | | QC| | | | QC-51470801|EO#|0.17| | | 20050627153202|[CR][ETX]D7[CR][LF]
R: [ACK]
S: [STX]3S|18|Manual|A2424| | | QC| | | | QC-51470801|BASO#|1.38| | |
20050627153202|[CR][ETX]6E[CR][LF]
R: [ACK]
S: [STX]4S|19|Manual|A2424| | | QC| | | | QC-51470801|IG%|10.1| | | 20050627153202|[CR][ETX]D3[CR][LF]
R: [ACK]
S: [STX]5S|20|Manual|A2424| | | QC| | | | QC-51470801|IG#|0.23| | | 20050627153202|[CR][ETX]CD[CR][LF]
R: [ACK]
S: [STX]6S|21|Manual|A2424| | | QC| | | | QC-51470801|NRBC%|100.0| | | 20050627153202 |[CR][ETX]92
[CR][LF]
R: [ACK]
S: [STX]7S|22|Manual|A2424| | | QC| | | | QC-51470801|NRBC#|2.38| | | 20050627153202 |[CR][ETX]6E
[CR][LF]
R: [ACK]
S: [STX]0S|23|Manual|A2424| | | QC| | | | QC-51470801|RDW-SD|42.7| | | 20050627153202 |[CR][ETX]D1[CR]
[LF]
R: [ACK]
S: [STX]1S|24|Manual|A2424| | | QC| | | | QC-51470801|RDW-CV|15.3| | | 20050627153202 |[CR][ETX]D1
[CR][LF]
R: [ACK]
S: [STX]2S|25|Manual|A2424| | | QC| | | | QC-51470801|PDW|9.1| | | 20050627153202|[CR][ETX]DC[CR][LF]
R: [ACK]
S: [STX]3S|26|Manual|A2424| | | QC| | | | QC-51470801|MPV|9.8| | | 20050627153202|[CR][ETX]ED[CR][LF]
S: [STX]4S|27|Manual|A2424| | | QC| | | | QC-51470801|P-LCR|19.6| | | 20050627153202|[CR][ETX]89[CR][LF]
R: [ACK]
June 2014 - Version 8.0

R: [ACK]

Sysmex - Universal Interface SUIT 34

Appendixes

S: [STX]5S|28|Manual|A2424| | | QC| | | | QC-51470801|PCT|0.05| | | 20050627153202|[CR][ETX]09[CR][LF]

R: [ACK]
S: [STX]6S|29|Manual|A2424| | | QC| | | | QC-51470801|RET%|6.92| | | 20050627153202|[CR][ETX]40[CR][LF]
R: [ACK]
S: [STX]7S|30|Manual|A2424| | | QC| | | | QC-51470801|RET#|0.1592| | | 20050627153202|[CR][ETX]97[CR][LF]
R: [ACK]
S: [STX]0S|31|Manual|A2424| | | QC| | | | QC-51470801|IRF|36.6| | | 20050627153202|[CR][ETX]02[CR][LF]
R: [ACK]
S: [STX]1S|32|Manual|A2424| | | QC| | | | QC-51470801|LFR|63.4| | | 20050627153202|[CR][ETX]05[CR][LF]
R: [ACK]
S: [STX]2S|33|Manual|A2424| | | QC| | | | QC-51470801|MFR|29.7| | | 20050627153202|[CR][ETX]0D[CR][LF]
R: [ACK]
S: [STX]3S|34|Manual|A2424| | | QC| | | | QC-51470801|HFR|6.9| | | 20050627153202|[CR][ETX]D7[CR][LF]
R: [ACK]
S: [STX]4S|35|Manual|A2424| | | QC| | | | QC-51470801|RET-HE|20.7| | |
20050627153202|[CR][ETX]C8[CR][LF]
R: [ACK]
S: [STX]5S|36|Manual|A2424| | | QC| | | | QC-51470801|IPF|22.2| | | 20050627153202|[CR][ETX]01[CR][LF]
R: [ACK]
S: [STX]6S|37|Manual|A2424| | | QC| | | | QC-51470801|H_R[ACK]| | | | 20050627153202|[CR][ETX]28[CR][LF]
R: [ACK]
S: [STX]7S|38|Manual|A2424| | | QC| | | | QC-51470801|H_TUBE| | | | 20050627153202|[CR][ETX]39[CR][LF]
R: [ACK]
S: [STX]0S|39|Manual|A2424| | | QC| | | | QC-51470801|H_INID|A2424| | |
20050627153202|[CR][ETX]34[CR][LF]
R: [ACK]
S: [STX]1S|40|Manual|A2424| | | QC| | | | QC-51470801|H_INST|XE-2100| | |
20050627153202|[CR][ETX]C7[CR][LF]
R: [ACK]
S: [STX]2L|1| | 0|42[CR][ETX]45[CR][LF]
R: [ACK]
S: [EOT]

June 2014 - Version 8.0

35 Sysmex - Universal Interface SUIT

 Appendixes

Method 2:
Another method consists that the user will send the quality by
using the QC-Charts of the analyzer. In this case the file
number of the charts will be used as sample number.
E.g.: 11 for the file no. 11

S: [ENQ]
R: [ACK]
S: [STX]1H|^~\&| | | | | | | | | | |A.2|200506271532[CR][ETX]35[CR][LF]
R: [ACK]
S: [STX]2S|1|Manual|A2424| | | QC| | | | 11|WBC|2.27| | | 20050627153207|[CR][ETX]54[CR][LF]
R: [ACK]
S: [STX]3S|2|Manual|A2424| | | QC| | | | 11|RBC|2.30| | | 20050627153207|[CR][ETX]4B[CR][LF]
R: [ACK]
S: [STX]4S|3|Manual|A2424| | | QC| | | | 11|HGB|6.0| | | 20050627153207|[CR][ETX]18[CR][LF]
R: [ACK]
S: [STX]5S|4|Manual|A2424| | | QC| | | | 11|HCT|17.6| | | 20050627153207|[CR][ETX]60[CR][LF]
R: [ACK]
S: [STX]6S|5|Manual|A2424| | | QC| | | | 11|MCV|76.5| | | 20050627153207|[CR][ETX]6D[CR][LF]
R: [ACK]
S: [STX]7S|6|Manual|A2424| | | QC| | | | 11|MCH|26.1| | | 20050627153207|[CR][ETX]58[CR][LF]
R: [ACK]
S: [STX]0S|7|Manual|A2424| | | QC| | | | 11|MCHC|34.1| | | 20050627153207|[CR][ETX]94[CR][LF]
R: [ACK]
S: [STX]1S|8|Manual|A2424| | | QC| | | | 11|PLT|54| | | 20050627153207|[CR][ETX]0E[CR][LF]
R: [ACK]
S: [STX]2S|9|Manual|A2424| | | QC| | | | 11|NEUT%|44.9| | | 20050627153207|[CR][ETX]E7[CR][LF]
R: [ACK]
S: [STX]3S|10|Manual|A2424| | | QC| | | | 11|LYMPH%|37.0| | | 20050627153207|[CR][ETX]57[CR][LF]
R: [ACK]
S: [STX]4S|11|Manual|A2424| | | QC| | | | 11|MONO%|10.6| | | 20050627153207|[CR][ETX]05[CR][LF]
R: [ACK]
S: [STX]5S|12|Manual|A2424| | | QC| | | | 11|EO%|7.5| | | 20050627153207|[CR][ETX]37[CR][LF]
R: [ACK]
S: [STX]6S|13|Manual|A2424| | | QC| | | | 11|BASO%|60.8| | | 20050627153207|[CR][ETX]FC[CR][LF]
R: [ACK]
S: [STX]7S|14|Manual|A2424| | | QC| | | | 11|NEUT#|1.02| | | 20050627153207|[CR][ETX]08[CR][LF]
R: [ACK]
S: [STX]0S|15|Manual|A2424| | | QC| | | | 11|LYMPH#|0.84| | | 20050627153207|[CR][ETX]59[CR][LF]
R: [ACK]
S: [STX]1S|16|Manual|A2424| | | QC| | | | 11|MONO#|0.24| | | 20050627153207|[CR][ETX]04[CR][LF]
R: [ACK]
S: [STX]2S|17|Manual|A2424| | | QC| | | | 11|EO#|0.17| | | 20050627153207|[CR][ETX]63[CR][LF]
R: [ACK]
S: [STX]3S|18|Manual|A2424| | | QC| | | | 11|BASO#|1.38| | | 20050627153207|[CR][ETX]FA[CR][LF]
R: [ACK]
S: [STX]4S|19|Manual|A2424| | | QC| | | | 11|IG%|10.1| | | 20050627153207|[CR][ETX]5F[CR][LF]
R: [ACK]
S: [STX]5S|20|Manual|A2424| | | QC| | | | 11|IG#|0.23| | | 20050627153207|[CR][ETX]59[CR][LF]
R: [ACK]
S: [STX]6S|21|Manual|A2424| | | QC| | | | 11|NRBC%|100.0| | | 20050627153207|[CR][ETX]1E[CR][LF]
R: [ACK]
S: [STX]7S|22|Manual|A2424| | | QC| | | | 11|NRBC#|2.38| | | 20050627153207|[CR][ETX]FA[CR][LF]
R: [ACK]
S: [STX]0S|23|Manual|A2424| | | QC| | | | 11|RDW-SD|42.7| | | 20050627153207|[CR][ETX]5D[CR][LF]
June 2014 - Version 8.0

R: [ACK]
S: [STX]1S|24|Manual|A2424| | | QC| | | | 11|RDW-CV|15.3| | | 20050627153207|[CR][ETX]5D[CR][LF]

Sysmex - Universal Interface SUIT 36

Appendixes

R: [ACK]
S: [STX]2S|25|Manual|A2424| | | QC| | | | 11|PDW|9.1| | | 20050627153207|[CR][ETX]68[CR][LF]
R: [ACK]
S: [STX]3S|26|Manual|A2424| | | QC| | | | 11|MPV|9.8| | | 20050627153207|[CR][ETX]79[CR][LF]
R: [ACK]
S: [STX]4S|27|Manual|A2424| | | QC| | | | 11|P-LCR|19.6| | | 20050627153207|[CR][ETX]15[CR][LF]
R: [ACK]
S: [STX]5S|28|Manual|A2424| | | QC| | | | 11|PCT|0.05| | | 20050627153207|[CR][ETX]95[CR][LF]
R: [ACK]
S: [STX]6S|29|Manual|A2424| | | QC| | | | 11|RET%|6.92| | | 20050627153207|[CR][ETX]CC[CR][LF]
R: [ACK]
RS: [STX]7S|30|Manual|A2424| | | QC| | | | 11|RET#|0.1592| | | 20050627153207|[CR][ETX]23[CR][LF]
R: [ACK]
S: [STX]0S|31|Manual|A2424| | | QC| | | | 11|IRF|36.6| | | 20050627153207|[CR][ETX]8E[CR][LF]
R: [ACK]
S: [STX]1S|32|Manual|A2424| | | QC| | | | 11|LFR|63.4| | | 20050627153207|[CR][ETX]91[CR][LF]
R: [ACK]
S: [STX]2S|33|Manual|A2424| | | QC| | | | 11|MFR|29.7| | | 20050627153207|[CR][ETX]99[CR][LF]
R: [ACK]
S: [STX]3S|34|Manual|A2424| | | QC| | | | 11|HFR|6.9| | | 20050627153207|[CR][ETX]63[CR][LF]
R: [ACK]
S: [STX]4S|35|Manual|A2424| | | QC| | | | 11|RET-HE|20.7| | | 20050627153207|[CR][ETX]54[CR][LF]
R: [ACK]
S: [STX]5S|36|Manual|A2424| | | QC| | | | 11|IPF|22.2| | | 20050627153207|[CR][ETX]8D[CR][LF]
R: [ACK]
S: [STX]6S|37|Manual|A2424| | | QC| | | | 11|BASO-X|112.4| | | 20050627153207|[CR][ETX]8C[CR][LF]
R: [ACK]
S: [STX]7S|38|Manual|A2424| | | QC| | | | 11|BASO-Y|123.6| | | 20050627153207|[CR][ETX]93[CR][LF]
R: [ACK]
S: [STX]0S|39|Manual|A2424| | | QC| | | | 11|DIFF-X|152.8| | | 20050627153207|[CR][ETX]84[CR][LF]
R: [ACK]
S: [STX]1S|40|Manual|A2424| | | QC| | | | 11|DIFF-Y|62.5| | | 20050627153207|[CR][ETX]4B[CR][LF]
R: [ACK]
S: [STX]2S|41|Manual|A2424| | | QC| | | | 11|NRBC-X|197.5| | | 20050627153207|[CR][ETX]91[CR][LF]
R: [ACK]
S: [STX]3S|42|Manual|A2424| | | QC| | | | 11|NRBC-Y|131.7| | | 20050627153207|[CR][ETX]8A[CR][LF]
R: [ACK]
S: [STX]4S|43|Manual|A2424| | | QC| | | | 11|IMI#|1182| | | 20050627153207|[CR][ETX]B5[CR][LF]
R: [ACK]
S: [STX]5S|44|Manual|A2424| | | QC| | | | 11|IMI-DC|503.9| | | 20050627153207|[CR][ETX]7B[CR][LF]
R: [ACK]
S: [STX]6S|45|Manual|A2424| | | QC| | | | 11|IMI-RF|164.1| | | 20050627153207|[CR][ETX]89[CR][LF]
R: [ACK]
S: [STX]7S|46|Manual|A2424| | | QC| | | | 11|RBC-O|2.21| | | 20050627153207|[CR][ETX]03[CR][LF]
R: [ACK]
S: [STX]0S|47|Manual|A2424| | | QC| | | | 11|PLT-O|66| | | 20050627153207|[CR][ETX]BF[CR][LF]
R: [ACK]
S: [STX]1S|48|Manual|A2424| | | QC| | | | 11|RBC-Y|152.5| | | 20050627153207|[CR][ETX]41[CR][LF]
R: [ACK]
S: [STX]2S|49|Manual|A2424| | | QC| | | | 11|H_R[ACK]| | | | 20050627153207|[CR][ETX]B3[CR][LF]
R: [ACK]
S: [STX]3S|50|Manual|A2424| | | QC| | | | 11|H_TUBE| | | | 20050627153207|[CR][ETX]BB[CR][LF]
R: [ACK]
S: [STX]4S|51|Manual|A2424| | | QC| | | | 11|H_INID|A2424| | | 20050627153207|[CR][ETX]BE[CR][LF]
R: [ACK]
S: [STX]5S|52|Manual|A2424| | | QC| | | | 11|H_INST|XE-2100| | | 20050627153207|[CR][ETX]5A[CR][LF]
June 2014 - Version 8.0

R: [ACK]
S: [STX]6L|1| | 0|54[CR][ETX]4C[CR][LF]
R: [ACK]
S: [EOT]

37 Sysmex - Universal Interface SUIT

 Appendixes

5.3 Appendix C: host codes

5.3.1 Haematology section

Haematology Code Parameter name

WBC Number of all leukocytes
CBC RBC Number of all erythrocytes
HGB Hemoglobin concentration
HCT Hematocrit value: Erythrocytes ratio of total blood volume
MCH Mean erythrocyte volume in total sample
MCHC Mean hemoglobin volume per RBC
MCV Mean hemoglobin concentration of erythrocytes
PLT Number of all platelets
RDW-CV Calculated distribution width of erythrocytes, coefficient of variation
RDW-SD Calculated distribution width of erythrocytes, standard deviation
P-LCR Platelet- Large Cell Ratio
PCT Plateletcrit
PDW Calculated distribution width of platelets
MPV Mean platelet volume
PLT-INFO1 Info which indicated if the PLT value was corrected by RET channel
WBC-INFO2 Info which indicated if WBC value was corrected by NRBC count
NEUT# Neutrophil Count
DIFF NEUT% Neutrophil Percent
LYMPH# Lymphocyte Count
LYMPH% Lymphocyte Percent
MONO# Monocyte Count
MONO% Monocyte Percent
EO# Eosinophil Count
EO% Eosinophil Percent
BASO# Basophil Count
BASO% Basophil Percent
IG# 3 Immature granulocytes in #
IG% 3 Immature granulocytes in %
HPC#4 Hematopoietic Progenitor Cell Count
RET# Reticulocyte Count
RET RET% Reticulocyte Percent
RET-HE 5 Reticulocyte Hemoglobin Equivalent
LFR Low Fluorescence Ratio
MFR Middle Fluorescence Ratio
HFR High Fluorescence Ratio
IRF Immature Reticulocyte Fraction
IPF 5 Reticulocyte Hemoglobin Equivalent
NRBC NRBC# Nucleated RBC Count
NRBC% Nucleated RBC Percent
BF (Bodyfluid) MN# 6 Mononuclear Cell Count
MN%6 Mononuclear Cell Percent
PMN# 6 Polymorphonuclear Cell Count
PMN% 6 Polymorphonuclear Cell Count
WBC-BF6 WBC Body Fluid
RBC-BF6 RBC Body Fluid
June 2014 - Version 8.0

TC-BF6 Total cell count body fluid

1
If result 0 means not corrected, if result 1 = corrected
2
If result 0 means not corrected, if result 1 = corrected
3
Output analysis results when either NEUT# or NEUT% is ordered
4
Output analysis results when analyzed in the HPC mode
5 Output analysis results when one of RET#, RET%, LFR, MFR, HFR and IRF is ordered
6
Output analysis results when analyzed in the Body Fluid mode"

Sysmex - Universal Interface SUIT 38

Appendixes

Haematology Code Parameter name

Research WBC-B
parameter WBC-D
NEUT%_RESEARCH
LYMPH%_RESEARC
MONO%_RESEARCH
EO%_RESEARCH
BASO%_RESEARCH
NEUT#_RESEARCH
LYMPH#_RESEARCH
MONO#_RESEARCH
EO#_RESEARCH
BASO#_RESEARCH
IG%_RESEARCH
IG#_RESEARCH
RBC-BF_RESEARCH
BASO-X
BASO-Y
DIFF-X
DIFF-Y
NRBC-X
NRBC-Y
IMI#
IMI-DC
IMI-RF
RBC-O
PLT-O
RBC-X
RBC-Y
d-RBC
d-PLT
Dw/X
Dw/Y
NEUT#&
NEUT%&
LYMPH#&
LYMPH%&
HFLC#
HFLC%
AREA#
AREA%
NRBC+W
NEUT-X
NEUT-Y
PLT-I
HF-BF#
June 2014 - Version 8.0

HF-BF%
TC-BF#1
FRC#

39 Sysmex - Universal Interface SUIT

 Appendixes

Haematology Code Parameter name

FRC%
Research IRF-Y
parameter LSCRBC
HSCRBC
HYPOHE
HYPRHE
MICROR
MACROR
H-IPF
IPF#
PLT-X
RBC-HE
D-HE
RET-Y
RPI
EO-BF#
EO-BF%
TC-PMN%*
TC-MN%*
TC-EO%*
TC-HF%*
TNC-D
BA-D#
BA-D%
NE-SSC
NE-SFL
NE-FSC
LY-X
LY-Y
LY-Z
MO-X
MO-Y
MO-Z
NE-WX
NE-WY
NE-WZ
LY-WX
LY-WY
LY-WZ
MO-WX
MO-WY
MO-WZ
WBC-D
RBC-He
D-He (Delta-He)
UPP(RET)
TNC(RET)
WBC-P
June 2014 - Version 8.0

TNC-P
AREA1#(PLTF)
NE-BF#
NE-BF%

Sysmex - Universal Interface SUIT 40

Appendixes

Haematology Code Parameter name

LY-BF#
LY-BF%
MO-BF#
MO-BF%
RBC-BF(Research)
HGB-O
DELTA-HGB
MCHC-O
PLT-F2
HPC%
LYMPH%_RESEARCH
WBC(HSA)
RBC(HSA)
RBC-I(HSA)
RBC-O(HSA)
NEUT#(HSA)
LYMPH#(HSA)
MONO#(HSA)
EO#(HSA)
NEUT%(HSA)
LYMPH%(HSA)
MONO%(HSA)
EO%(HSA)
MN#(HSA)
PMN#(HSA)
HF#(HSA)
MN%(HSA)
PMN%(HSA)
HF%(HSA)
TC#(HSA)
WNR-X
Service WNR-Y
parameter WNR-Z
WNR-WX
WNR-WY
NRBC-1#
NRBC-2#
NRBC-1%
NRBC-2%
HGB-BLANK
HGB-SAMPLE
R-MFV
S-RBC
S-MCV
L-RBC
L-MCV
P-MFV
WDF-X
June 2014 - Version 8.0

WDF-Y
WDF-Z
WDF-WX
WDF-WY
WBC-FX(WDF)

41 Sysmex - Universal Interface SUIT

 Appendixes

Haematology Code Parameter name

DLT-WBCD
RBC-X
RET-X
RBC-Z
RBC-WX
RBC-WY
DLT-RBC
DLT-PLTO
Unclassified(RET)
UNCLASSIFIED
WPC-X
WPC-Y
WPC-Z
DLT-WBCP
AREA1#(WPC)
AREA2#(WPC)
AREA3#(WPC)
WPC-GR#
WPC-LY#
WPC-MO#
WPC-LY2#
WPC-SC#
WPC-FL-H1#
WPC-FL-H2#
WPC-FL-H3#
WPC-FL-L1#
WPC-LC1#
Service WPC-LC2#
parameter WPC-GR-X
WPC-GR-Y
WPC-GR-Z
WPC-LY-X
WPC-LY-Y
WPC-LY-Z
WPC-MO-X
WPC-MO-Y
WPC-MO-Z
WPC-LY2-X
WPC-LY2-Z
WPC-SC-X
WPC-SC-Z
PLTF-X
PLTF-Y
PLTF-Z
RBC-X(PLTF)
RBC-Y(PLTF)
RBC-Z(PLTF)
RBC-WX(PLTF)
June 2014 - Version 8.0

RBC-WY(PLTF)
DLT-PLTF
RBC-BF-I
RBC-BF-O
LY-BF1#

Sysmex - Universal Interface SUIT 42

Appendixes

Haematology Code Parameter name

LY-BF2#
MO-BF1#
MO-BF2#
MO-BF3#
HF-BF1#
HF-BF2#
LY-BF1%
LY-BF2%
MO-BF1%
MO-BF2%
MO-BF3%
HF-BF1%
HF-BF2%
HGB_NONSI2
LY-BF1#
LY-BF2#
MO-BF1#
MO-BF2#
MO-BF3#
HF-BF1#
HF-BF2#
LY-BF1%
LY-BF2%
MO-BF1%
MO-BF2%
MO-BF3%
HF-BF1%
HF-BF2%
WPC-GR-X
WPC-GR-Y
WPC-GR-Z
WPC-LY-X
WPC-LY-Y
WPC-LY-Z
WPC-MO-X
WPC-MO-Y
WPC-MO-Z
WPC-LY2-X
WPC-LY2-Z
WPC-SC-X
WPC-SC-Z
WPC-GR#
WPC-LY#
WPC-MO#
WPC-LY2#
WPC-SC#
WPC-FL-H1#
WPC-FL-H2#
June 2014 - Version 8.0

WPC-FL-H3#
WPC-FL-L1#
WPC-LC1#
WPC-LC2#
1
Output analysis results when analyzed in the Body Fluid mode
* Theses research parameters are only available with the WAM solution SIS

43 Sysmex - Universal Interface SUIT

 Appendixes

Disclaimer Research Parameter + Service Parameter

Parameter defined as research parameters (listed at table
above) and service parameters and which are obtained from
in vitro examination of specimens derived from the human
body used for the purpose of providing information:
concerning a physiological or pathological state, or
concerning a congenital abnormality, or
to determine the safety and compatibility with potential
recipients, or
to monitor therapeutic measures
are not officially intended by SYSMEX to be included in
patients reports as reportable (diagnostic) parameters.
If the user/licencee of the Sysmex instruments wants to use
these Research Parameter + Service Parameter in official
diagnosis for patients or in patient reports, he may do so, but
before he can use them for this purpose, it is under his own
responsibility to make a full evaluation of data, limitations,
interferences and complete risk management (ISO 14971)
after In-vitro Diagnostic Directive. (IVDD 98/79/EC, Annex VIII)
and its national transpositions in EU member states law.
June 2014 - Version 8.0

Sysmex - Universal Interface SUIT 44

Appendixes

5.3.2 Urinalysis section

Urinanalysis Code Parameter name

RBC Red blood cell
Urinanalysis WBC White blood cell
EC Epithelial cell
BACT Bacteria
Path.Cast (*) Pathological Cast
SRC (*) Small round cell
SPERM (*) Spermatozoa
XTAL (*) Crystal
MUCUS (*) Mucus
COND. (*) Conductivity (urine conductivity)
COND-Info1 Urinary concentration (urine concentration Information)
RBC-Info 2 RBC-Information (RBC forms Information)
UTI-Info 3 UTI-Information
CAST Cast
YLC (*) Yeast like cell
FLAG_REVIEW 4
FLAG_ERROR 5
FLAG_IDERROR 6
SAMPLE_SOURCE7
SAMPLE_COLOR 8
SAMPLE_CLARITY9
TOTAL_SEDch
TOTAL_BACch
1 COND_Info: The result 0 means not flagged, 1 means Rank 1, 2 means Rank 2, 3
means Rank 3, 4 means Rank 4, 5 means Rank 5
2 RBC_Info: The result 0 means RBC negative, 1 means Isomorphic?, 2 means
Dismorphic?, 3 means Mixed?
3 UTI_Info: The result of 0 means not flagged, 1 means UTI?
4
FLAG_REVIEW: The result of 0 means not flagged, 1 means REVIEW
5 FLAG_ERROR: The result of 0 means not flagged, 1 means Analysis error
6
FLAG_IDERROR: The result of 0 means not flagged, 1 means ID read error occurred
7
SAMPLE_SOURCE: The result 0 means Sample collected optionally, 1 means Sample collected in
the morning, 2 means Sample accumulated during a period of time, 3 means Sample collected after
meal, 4 means Sample collected through Catheter, * means Uncertain sample
8 SAMPLE_COLOR: The result 0 means water-white, 1 means light yellow brown, 2 means brown,
3 means yellow brown, 4 means orange, 5 means red, 6 means dark brown, 7 means
green , 8 means blue, 9 means milky white, * means Uncertain
9
SAMPLE_CLARITY: The result 0 means clear, 1 means slight hazy, 2 means hazy, 3 means
slightly cloudy, 4 means cloudy, * means Uncertain
(*) Research Parameter Disclaimer
Parameter marked as (*) (research parameters) and which are obtained from in vitro
examination of specimens derived from the human body used for the purpose of providing
information:
concerning a physiological or pathological state, or
concerning a congenital abnormality, or
to determine the safety and compatibility with potential recipients, or
to monitor therapeutic measures
are not officially intended by SYSMEX to be included in patient's reports as "reportable
(diagnostic) parameters".
June 2014 - Version 8.0

If the user/licencee of the Sysmex instruments wants to use these Research Parameter +
Service Parameter in official diagnosis for patients or in patient reports, he may do so, but
before he can use them for this purpose, it is under his own responsibility to make a full
evaluation of data, limitations, interferences and complete risk management (ISO 14971) after
In-vitro Diagnostic Directive (IVDD 98/79/EC, Annex VIII) and its national transpositions in EU
member states law

45 Sysmex - Universal Interface SUIT

 Appendixes

Urinanalysis Code Parameter name

10
FLAG_RBC
10
FLAG_WBC
FLAG_EC 10
10
FLAG_CAST
10
FLAG_BACT
FLAG_PATCAST10
10
FLAG_SRC
10
FLAG_SPERM
FLAG_YLC10
10
FLAG_MUCUS
10
FLAG_XTAL
FLAG_COND 10

Urinanalysis Code Parameter name

S_FSC
Extra QC-Data S_FSCW
S_FLH
S_FLL
S_FLLW
S_SSC
B_FSC
B_FSCW
B_FLH

10 FLAG_RBC, FLAG_WBC, FLAG_EC, FLAG_CAST, FLAG_BACT, FLAG_PATCAST, FLAG_SRC, FLAG_SPERM,

FLAG_YLC, FLAG_MUCUS, FLAG_XTAL, FLAG_COND: The result of means not flagged, + means
REVIEW, * means Low Reliability
June 2014 - Version 8.0

Sysmex - Universal Interface SUIT 46

Appendixes

5.3.3 Coagulation section

Due to the fact that that the profile codes as well as the related
test names from the coagulation analyzers are customizable
we recommend you to contact the site where the analyzer will
be installed for the exact test codes and test names.

However please find below a table with the different test code
and test name which are the default manufacturer settings.
As mention these codes can be customized

June 2014 - Version 8.0

47 Sysmex - Universal Interface SUIT

 Appendixes

5.3.4 Sample tracking information

General Code Parameter name

H_TUBE Haematology Tube position in the rack
Sampletracking H_RACK Haematology Rack identification
H_INST Haematology Instrument name
H_INID Haematology Instrument ID
C_TUBE Coagulation Tube position in the rack
C_RACK Coagulation Rack identification
C_INST Coagulation Instrument name
C_INID Coagulation Instrument ID
U_TUBE Urinalysis Tube position in the rack
U_RACK Urinalysis Rack identification
U_INST Urinalysis Instrument name
U_INID Urinalysis Instrument ID
June 2014 - Version 8.0

Sysmex - Universal Interface SUIT 48

Appendixes

5.4 Appendix D: Interpretation-Flags (IP Flags)

If there is a work area-manager connected to LIS all flags can
be customized and will not follow this table!
If a single analyzer is directly connected to LIS, these flags will
be in use. The UF-1000i/UF-500i is also able to transmit up to
8 customizable additional flags.

UF-1000i\
XE-2100D

XN series
XE-2100L

XS-1000i/
XT-2000i

XT-4000i
Flagname

XE-2100

XE-5000
XT1800i

XS-800i

UF500i
(IP messages)

WBC_Abn_Scattergram
NRBC_Abn_Scattergram
Neutropenia
Neutrophilia
Lymphopenia
Lymphocytosis
Leukocytopenia
Leukocytosis
Monocytosis
Eosinophilia
Basophilia
NRBC_Present
IG_Present
RBC_Abn_Distribution
Dimorphic_Population
Anisocytosis
Microcytosis
Macrocytosis
Hypochromia
Anemia
Erythrocytosis
RET_Abn_Scattergram
Reticulocytosis
PLT_Abn_Scattergram
PLT_Abn_Distribution
Thrombocytopenia
Thrombocytosis
Blasts?
Immature_Gran?
NRBC?
Left_Shift?
Atypical_Lympho?
RBC_Lyse_Resistance?
Abn_Lympho/L-Blasts?
Abn_Lympho/Blasts?
Blasts/Abn Lympho?
June 2014 - Version 8.0

Abn_Lympho?
RBC_Agglutination?
Turbidity/HGB_Interference?
Iron_Deficiency?
HGB_Defect?

49 Sysmex - Universal Interface SUIT

 Appendixes

UF-1000i\
XE-2100D

XN series
XE-2100L

XS-1000i/
XT-2000i

XT-4000i
Flagname

XE-2100

XE-5000
XT1800i

XS-800i

UF500i
(IP messages)

Fragments?
PLT_Clumps?
PLT_Clumps(S)?
Debris high
Discriminator error RBC/XTAL
Discriminator error RBC/BACT
Discriminator error RBC/YLC
Urine conductivity abnormal
Carry-over?
1Only available with the IG Master software

5.4.1 Action & Error Messages and positive flagging information

XN-Series
UF-1000i\
XE-2100D

XE-2100L

XS-1000i/
XT-2000i

XT-4000i
XE-2100

XE-5000
XT1800i

XS-800i
Flagname

UF500i
Action_MESSAGE_RET
Action_MESSAGE_NRBC
Action_MESSAGE_Delta
Action_MESSAGE_DIFF
Positive_Diff
Positive_Morph
Positive_Count
Error_Func
Error_Result
ACTION_MESSAGE_DELTA_WBC
ACTION_MESSAGE_DELTA_HGB
ACTION_MESSAGE_DELTA_MCV
ACTION_MESSAGE_DELTA_PLT
ACTION_MESSAGE_WBC
ACTION_MESSAGE_RBC
ACTION_MESSAGE_Review_PLT
ACTION_MESSAGE_PLT
ACTION_MESSAGE_Sample_Mixing
_Failure?
June 2014 - Version 8.0

Sysmex - Universal Interface SUIT 50

Appendixes

5.5 Appendix E: Optional specification of OBR-3 management

To be compatible to some installations of SIS/PC-DPS its
possible to use this specification for the OBR-3 / OBR-4, too.

5.6 Appendix F: Case Manager

Please contact your local Sysmex representative if the Case
Manager (CM) is used or not.

5.6.1 Case Manager specific test codes & test names

Please find below the details of the test codes with its test
names that the Case Manger could send in the OBX-4
segment.

Test code Test name

Case_Manager_A Case_Manager_A
Case_Manager_B Case_Manager_B
Case_Manager_C Case_Manager_C
Case_Manager_D Case_Manager_D
Case_Manager_E Case_Manager_E
Case_Manager_F Case_Manager_F
Case_Manager_G Case_Manager_G
Case_Manager_H Case_Manager_H
Case_Manager_I Case_Manager_I
Case_Manager_J Case_Manager_J
Case_Manager_K Case_Manager_K
Case_Manager_L Case_Manager_L
Case_Manager_M Case_Manager_M
Case_Manager_N Case_Manager_N
June 2014 - Version 8.0

51 Sysmex - Universal Interface SUIT

 Appendixes

Case_Manager_O Case_Manager_O
Case_Manager_P Case_Manager_P
Case_Manager_Q Case_Manager_Q
Case_Manager_R Case_Manager_R
Case_Manager_S Case_Manager_S
Case_Manager_T Case_Manager_T

5.6.2 Case Manager Results

Please find below the details (refer Description column) of

the test result that the Case Manger could send in the OBX-6
segment.
Each description is identified by a code for internal
management i.e. this code is not sent to the host
Case No. Description
1 1: Suspicion of Microangiopathic Haemolytic Disease as cause of thrombocytopenia?
2 2: Suspicion of HELLP syndrome?
3 3: Suspicion of Autoimmune Thrombocytopenia?
4 4: Suspicion of platelet transfusion requirement due to suppressed thrombopoiesis?
5 5: Suspicion of Malaria associated Disseminated Intravascular Coagulation?
6 6: Suspicion of Essential Thrombocythaemia?
7 7: Suspicion of Thalassaemia Minor as cause of microcytic hypochromic anaemia?
8 8: Suspicion of Megaloblastic Anaemia?
9 9: Suspicion of imminent platelet count recovery post bone marrow suppression?
10 10: Suspicion of Polycythaemia vera as cause of extreme thrombocytosis?
11 11: Suspicion of iron deficient Polycythaemia vera as cause of thrombocytosis?
12 12: Suspicion of Iron deficiency as the cause of microcytic hypochromic anaemia?
13 13: Suspicion of Polycythaemia vera as the cause of erythrocytosis?
14 14: Suspicion of reactive erythrocytosis?
15 15: Suspicion of Thalassaemia Intermedia?
16 16: Suspicion of immune mediated intravascular haemolysis as cause of anaemia?
17 17: Suspicion of immune mediated extravascular haemolysis as cause of anaemia?
18 18: Suspicion of intravascular haemolytic anaemia due to microangiopathy (MAHA)
19 19: Suspicion of Thalassaemia Intermedia with marked haemolysis?
20 20: Suspicion for extravascular haemolysis due to hereditary spherocytosis?
21 21: Suspicion of Myelodysplastic Syndrome - Refractory Anaemia with Excess Blasts?
22 22: Suspicion of Myelodysplastic Syndrome as cause of anaemia ?
23 23: Suspicion of Acute Erythroleukaemia?
24 24: Suspicion of Myelodysplastic Syndrome as cause of pancytopenia?
25 25: Suspicion of Chronic Myelomonocytic Leukaemia despite absence of dysplasia?
26 26: Suspicion of Chronic Myelomonocytic Leukaemia ?
27 27: Suspicion of Atypical Chronic Myeloid Leukaemia (with dysplasia)?

5.6.3 Log file example

June 2014 - Version 8.0

Please find below some log file examples of Case Manger

transaction:

Sysmex - Universal Interface SUIT 52

Appendixes

H|^~\&|||||||||||A.2|201002181450
P|1|001|||FirstName^LastName||19200808|M||||||||0.0|0.0||||||||^Internal|||||||20100218
OBR|1||12345| CASE_MANAGER_A^CASE_MANAGER_A||||||||||201002181450|||||||||||||
OBX|1|NM|h_rack^RACK||||||||F|201002181450||||
OBX|2|NM|h_tube^TUBE||||||||F|201002181450||||
OBX|3|ST|h_inst^Inst.||11001||||||F|201002181450||||
OBX|4|ST|h_inID^Analyzer||XE-5000||||||F|201002181450||||
OBX|5|ST|CASE_MANAGER_A^CASE_MANAGER_A||1: Suspicion of Microangiopathic Haemolytic
Disease as cause of thrombocytopenia?||||||F|201002181450||||
L|1||1|9

H|^~\&|||||||||||A.2|201002181450
P|1|002|||FirstName^LastName||19200808|M||||||||0.0|0.0||||||||^Internal|||||||20100218
OBR|1||23456|CASE_MANAGER_A^CASE_MANAGER_A~
CASE_MANAGER_B^CASE_MANAGER_B~CASE_MANAGER_C^CASE_MANAGER_C||||||||||20100218145
0|||||||||||||
OBX|1|NM|h_rack^RACK||||||||F|201002181450||||
OBX|2|NM|h_tube^TUBE||||||||F|201002181450||||
OBX|3|ST|h_inst^Inst.||11001||||||F|201002181450||||
OBX|4|ST|h_inID^Analyzer||XE-5000||||||F|201002181450||||
OBX|5|ST|CASE_MANAGER_A^CASE_MANAGER_A||1: Suspicion of Microangiopathic Haemolytic
Disease as cause of thrombocytopenia?||||||F|201002181450||||
OBX|6|ST|CASE_MANAGER_B^CASE_MANAGER_B||2: Suspicion of HELLP
syndrome?||||||F|201002181450||||
OBX|0|ST|CASE_MANAGER_C^CASE_MANAGER_C||27: Suspicion of Atypical Chronic Myeloid
Leukaemia (with dysplasia)?||||||F|201002181450||||
L|1||1|11

June 2014 - Version 8.0

53 Sysmex - Universal Interface SUIT

June 2014 - Version 8.0
Appendixes

Sysmex - Universal Interface SUIT 54