Problem Set

1. Harley-Davidson has its engine assembly plant in Milwaukee and its motorcycle

assembly plant in Pennsylvania. Engines are transported between the two plants using

trucks, with each trip costing $1,000. The motorcycle plant assembles and sells 300

motorcycles each day. Each engine costs $500, and Harley incurs a holding cost of 20

percent per year. How many engines should Harley load onto each truck? What is the

cycle inventory of engines at Harley?

2. As part of its initiative to implement just-in-time (JIT) manufacturing at the motorcycle

assembly plant in problem 1, Harley has reduced the number of engines loaded on each

truck to 100. If each truck trip still costs $1,000, how does this decision impact annual

inventory costs at Harley? What should the cost of each truck be if a load of 100 engines

is to be optimal for Harley?

3. A steel rolling mill can produce I-beams at the rate of 20 tons per week. Customer

demand for the beams is 5 tons per week. To produce I-beams, the mill must go through a

setup that requires changing to the appropriate rolling patterns. Each setup costs the mill

$10,000 in labor and lost production. I-beams cost the mill $2,000 per ton and the mill

has a holding cost of 25 percent. What is the optimal production batch size for I-beams?

What is the annual setup cost of the optimal policy? What is the annual holding cost?

4. Harley purchases components from three suppliers. Components purchased from Supplier

A are priced at $5 each and used at the rate of 20,000 units per month. Components

purchased from Supplier B are priced at $4 each and are used at the rate of 2,500 units

per month. Components purchased from Supplier C are priced at $5 each and used at the

rate of 900 units per month. Currently, Harley purchases a separate truckload from each
 supplier. As part of its JIT drive, Harley has decided to aggregate purchases from the

three suppliers. The trucking company charges a fixed cost of $400 for the truck with an

additional charge of $100 for each stop. Thus, if Harley asks for a pickup from only one

supplier, the trucking company charges $500; from two suppliers, it charges $600; and

from three suppliers, it charges $700. Suggest a replenishment strategy for Harley that

minimizes annual cost. Assume a holding cost of 20 percent per year. Compare the cost

of your strategy with Harleys current strategy of ordering separately from each supplier.

What is the cycle inventory of each component at Harley?

5. Prefab, a furniture manufacturer, uses 20,000 square feet of plywood per month. Its

trucking company charges Prefab $400 per shipment, independent of the quantity

purchased. The manufacturer offers an all unit quantity discount with a price of $1 per

square foot for orders under 20,000 square feet, $0.98 per square foot for orders between

20,000 square feet and 40,000 square feet, and $0.96 per square foot for orders larger

than 40,000 square feet. Prefab incurs a holding cost of 20 percent. What is the optimal

lot size for Prefab? What is the annual cost of such a policy? What is the cycle inventory

of plywood at Prefab? How does it compare with the cycle inventory if the manufacturer

does not offer a quantity discount but sells all plywood at $0.96 per square foot?

6. Now consider the case where the manufacturer now offers a marginal unit quantity

discount for the plywood. The first 20,000 square feet of any order are sold at $1 per

square foot, the next 20,000 square feet are sold at $0.98 per square foot, and any

quantity larger than 40,000 square feet is sold for $0.96 per square foot. What is the

optimal lot size for Prefab given this pricing structure? How much cycle inventory of

plywood will Prefab carry given the ordering policy?

maintains consignment inventory (owned by TopOil) at each location. Currently, TopOil

uses TL transportation to deliver separately to each customer. Each truck costs $800 plus

$250 per stop. Thus, delivering to each customer separately costs $1,050 per truck. TopOil

is considering aggregating deliveries to Nashville on a single truck. Demand at the large

customer is 60 tons a year, demand at the medium customer is 24 tons per year, and demand

at the small customer is 8 tons per year. Product cost for TopOil is $10,000 per ton, and it

uses a holding cost of 25 percent. Truck capacity is 12 tons.

(i) What is the annual transportation and holding cost if TopOil ships a full truckload

each time a customer is running out of stock? How many days of inventory is carried

at each customer under this policy?

(ii) What is the optimal delivery policy to each customer if TopOil ships separately to

each of them? What is the annual transportation and holding cost? How many days of

inventory is carried at each customer under this policy?

(iii) What is the optimal delivery policy to each customer if TopOil aggregates shipments

to each of the three customers on every truck that goes to Nashville? What is the

annual transportation and holding cost? How many days of inventory are carried at

each customer under this policy?

(iv) Can you come up with a tailored policy that has lower costs than the policies in (b) or

(c)? What are the costs and inventories for your suggested policy?

8. Dominicks supermarket chain sells Nut Flakes, a popular cereal manufactured by the

Tastee cereal company. Demand for Nut Flakes is 1,000 boxes per week. Dominicks has a

holding cost of 25 percent and incurs a fixed trucking cost of $200 for each replenishment
 order it places with Tastee. Given that Tastee normally charges $2 per box of Nut Flakes,

how much should Dominicks order in each replenishment lot? Tastee runs a trade

promotion, lowering the price of Nut Flakes to $1.80 for a month. How much should

Dominicks order be, given the short-term price reduction?

Practice Problems (Home)

1. Amazon sells 20,000 units of consumer electronics from Samsung every month. Each

unit costs $100 and Amazon has a holding cost of 20 percent. The fixed clerical and

transportation cost for each order Amazon places with Samsung is $4,000. What is the

optimal size of the order that Amazon should place with Samsung? With the goal of

reducing inventories, Amazon would like to reduce the size of each order it places with

Samsung to 2,500 units (allowing it to get four replenishment orders every month). How

much should it reduce the fixed cost per order for an order of 2,500 units to be optimal?

2. Amazon sells 10,000 Lenovo PCs every month. Each PC costs $500 and Amazon has a

holding cost of 20 percent. For what fixed cost per order would an order size of 10,000

units be optimal? For what fixed cost per order would an order size of 2,500 units be

optimal?

3. A steel rolling mill can produce I-beams at the rate of 20 tons per week. Customer

demand for the beams is 5 tons per week. I-beams cost the mill $2,000 per ton and the

mill has a holding cost of 25 percent. To produce I-beams, the mill must go through a

setup that requires changing to the appropriate rolling patterns. The mill would like to

produce I-beams in batches of 40 tons (resulting in a production batch every 8 weeks).

For what set up cost would this batch size be optimal?

4. An electronics company has two contract manufacturers in Asia. Foxconn assembles its

tablets and smart phones while Flextronics assembles its laptops. Monthly demand for
 tablets and smartphones is 10,000 units while that for laptops is 4,000. Tablets cost the

company $100 while laptops cost $400 and the company has a holding cost of 25 percent.

Currently the company has to place separate orders with Foxconn and Flextronics and

receives separate shipments. The fixed cost of each shipment is $10,000. What is the

optimal order size and order frequency with each of Foxconn and Flextronics?

The company is thinking of combining all assembly with the same contract

manufacturer. This will allow for a single shipment of all products from Asia. If the fixed

cost of each shipment remains $10,000, what is the optimal order frequency and order

size from the combined orders? How much reduction in cycle inventory can the company

expect as a result of combining orders and shipments?

5. Demand for phones at Amazon is 5,000 per month. Holding cost Amazon is 25 percent

and the company incurs a fixed cost of $500 for each order placed. The supplier offers an

all unit quantity discount with a price of $200 per phone for all orders under 10,000, a

price of $195 for all orders of 10,000 or more but under 20,000 and a price of $190 for all

orders of 20,000 or more. How many phones should Amazon order per replenishment?

6. Demand for phones at Amazon is 5,000 per month. Holding cost Amazon is 25 percent

and the company incurs a fixed cost of $500 for each order placed. The supplier offers a

marginal unit quantity discount with a price of $200 per phone for the first 10,000 phones

in an order, a price of $195 for the next 10,000 phones in the order and a price of $190

for the quantity above 20,000 in the order. How many phones should Amazon order per

replenishment?