DISTINGUISH TESTS

SL.NO Name of the test Identification of compounds

01 Neutral ferric chloride Only phenols(violet or purple color)

02 Sodium bicarbonate Only carboxylic acid(brisk effervescence)
03 Iodo form test All 2-ketones,2-
alohols,ethanal,ethanol(yellow color
crystals)
04 Lucas test To distinguish10 20 & 30 alcohols
05 Hinsberg test 10 20 &30 amines
06 Carbylamines test Only primary amines
07 Sodium metal test Alcohols(effervescence)
08 2,4 DNP test Both aldehydes & ketones (yellow color
crystals)
09 Tollens test Only aldehydes(silver mirror formation)
10 Fehilings test Only aldehydes(red ppt)
11 Schiffs test Aldehydes & Ketones
12

DISTINGUISH BETWEEN

How can we distinguish organic compounds?

Test for Hydrocarbons: Unsaturation Test
i) With Bromine water: Disappearance of orange-red colour of bromine water
indicates unsaturation.
ii) Baeyers test; When alkaline KMnO4 is added to an unsaturated hydrocarbon,
disappearance of pink colour indicates unsaturation. In this process MnO2 is
formed( brown colour).
Specific test for acetylene and all terminal alkynes.
i) with Tollen reagent: H-CC-H + 2[Ag(NH3)2]+ OH- Ag-CC-Ag + 4NH3 + 2H2O
ii) With ammonical cuprous chloride:
H-CC-H + 2[Ag(NH3)2]+ OH- Ag-CC-Ag + 4NH3 + 2H2O
Hint:
1. if one alkane and one unsaturated substance given, distinguish them with
unsaturation test.
2. if one alkene and one alkyne given, distinguish them with specific test for
alkynes.
3. if both alkynes are given, distinguish them with specific test.

Test for Alcohols:

1. Ester test: Alcohol form ester with carboxylic acid. Ester can be identified by
sweet smelling. R-CH + R-COOHR-COOR + H2O
 2. With Ceric ammonium nitrate, alcohol gives pink or red colour.

Different types of Alcohol:

Lucas Test: Alcohol treated with Lucas reagent. (HCl + ZnCl2)
If turbidity appears immediately --- Tertiary alcohol
If turbidity appears after 5 min --- Secondary alcohol
If turbidity not appears --- Primary alcohol
Iodoform test: etyl alcohol and all 2-hydroxy alcohol gives this test.
Reactions:
Hint:
1. If one alcohol and one other compound is given, explain ester formation, ceric
ammonium nitrate test for alcohol.
2. If primary, Sec, or Tert. Alcohol given, explain with Lucas test.
3. If both alcohol are same type ( either primary, sec or tert) use iodoform test to
distinguish them.

Test for Phenol:

Phenol when reacts with neutral ferric chloride, it produces violet colour.
Imp: Acetic acid and Formic acid also gives this test but produces deep red colouration.
Test for aldehydes and Ketones:

a) Test given by both aldehydes and ketones.

i). 2,4-dinitrophenyl hydrazine test: carbonyl compound react with 2,4-
dinitrophenylhydrazine to form yellow or orange crystals.
ii). Sodium bisulphate test: Aldehydes and ketones both form crystalline addition
product with NaHSO3.
iii). All aldehyde and ketones having CH3-CO structure gives iodoform test
positive.

b) Test given by aldehydes only.

i). Tollen Test: On warming with ammonical silver nitrate solution(Tollen reagent) in
alkaline medium, aldehyde gives silver mirror on the side of test tube.
RCHO + 2[Ag(NH3)2]+ + 3OH- RCOO- + 2Ag + 2H2O + 4NH3.
ii). Fehling solution Test: Fehling solution is alkaline solution of copper sulphate
containing sodium potassium tartarate. Aldehydes gives reddish brown precipitate of
Cu2O with Fehling solution. RCHO + 2Cu+2 + 5OH- RCOO- + Cu2O + 3H2O

c) Test given by ketones only.

i). m-dinitrobenzene test: Ketone gives violet colour with m-dinitrobenzene + NaOH
solution.
ii). Sodium nitroprusside test: Ketone gives red colouration with sodium
nitroprusside. In this process, the anion of the ketone formed by an alkali reacts with
nitroprusside ion to form coloured ions.
CH3COCH3 + OH- CH3COCH2- + H2O
[Fe(CN)5NO]2- + CH3COCH2- [Fe(CN)5NO.CH3COCH2]2-.
 Benzophenone does not gives (+) test with m-dinitrobenzene and sodium
nitroprusside.
Hint:
1. If one aldehyde and one ketone given, distinguish them by specific test.
2. If both are aldehyde or ketone, try to distinguish them by iodoform test.
3. Acetophenone and benzophenone: Acetophenone gives ketonic test whereas
benzophenone does not.

Test for Carboxylic acid:

1. Litmus test( phenol also giving this test)
2. Ester test
3. Sodium bicarbonate test
RCOOH + NaHCO 3 RCOONa +CO2 + H2O
4. HCOOH and CH3COOH gives test with neutral FeCl3.

Test for Amines:

i). Litmus test
ii). Nitrous acid test:
Primary amine reacts with nitrous acid to give nitrogen gas.
RNH2 + HONO ROH + H2O + N2
Secondary amine reacts with nitrous acid to form a yellow oily nitrosamine.
R2NH + HONO R2N-NO + H2O
Tertiary amine reacts with nitrous acid to form soluble nitrite salt.
R3N + HONO R3NH+ONO-.( trialkyl ammonium nitrite)
iii) Hinsberg Test: Amine when shaken with benzene sulphonyl chloride-

1. A clear solution in NaOH solution which on acidification gives an insoluble

material indicates primary amine.
C6H5-SO2Cl + H-NH-R HCl > C6H5SO2-NH-R NaOH> [C6H5-SO2-NR]-
Na+
Benzene sulphonyl chloride N-alkylbenzene
sulphonamide(insoluble)

2. A precipitate (insoluble) which is insoluble in NaOH solution indicates secondary

amine.
C6H5-SO2Cl + H-NR-R HCl > C6H5SO2-NR-R
Benzene sulphonyl chloride N,N-dialkylbenzene sulphonamide(insoluble in NaOH)
3. Tertiary amine does not react with benzene sulphonyl chloride. It forms soluble
substance (addition product).

+HCl
C6H5-SO2Cl + NR3 > [R3NH]+Cl-
Benzene sulphonyl chloride soluble
Specific test for Primary amine:
1. Azo-dye test: for aromatic primary amine only.
 2. Carbylamine test: for aliphatic and aromatic primary amine both.
RNH2 + CHCl3 + 3KOH RNC + 3KCl +3H2O

C6H5-SO2Cl + H-NH-R HCl > C6H5SO2-NH-R NaOH> [C6H5-SO2-NR]- Na+

Benzene sulphonyl chloride N-alkylbenzene
sulphonamide(insoluble)
C6H5-SO2Cl + H-NR-R HCl > C6H5SO2-NR-R
Benzene sulphonyl chloride N,N-dialkylbenzene sulphonamide(insoluble in
NaOH)

*******
Mechanism in Organic Chemistry

1. SN2 Mechanism:

2. SN1 mechanism ;

3. Effect of substituent on nucleophilic substitution on aryl halides

4. Hydration of Alkenes:
5. Addition of Grignard Reagent to Aldehydes & Ketones:

6. Dehydration of alcohols:
7. Dehydration of alcohols to give Ethers:

8. Reaction of ether with HI

9. Nucleophilic addition mechanism of aldehydes & ketones.

10. Esterification mechanism;

11. Acylation of amines:

*******
 Organic Chemistry
Name Reactions
1. Aldol Condensation: condensation between two molecule of an
aldehyde or a ketone having atleast one -hydrogen atom to form a
-hydroxyaldehyde or a -hydroxyketone is known as aldol
condensation.

Aldol condensation takes place in presence of dil base.

2. Cannizzaro Reaction: The disproportionation (self-redox) of
aldehydes lacking -hydrogen atom (as C6H5CHO, HCHO,
R3C.CHO etc.) in presence of strong base to form salt of an acid &
a primary alcohol is known as Cannizzaro reaction.

3. Carbylamine test: When a primary amine is heated with alcoholic

caustic potash and chloroform, an offensive smelling compound
called carbylamine ( alkyl or arylisocyanide) is formed.

4. Claisen Condensation: The self condensation of ester containing -

hydrogen atom in the presence of an alkoxide (C2H5ONa) to give a
-ketoester is called Claisen condensation. Eg. Two molecule of
ethylacetate condenses together to form ethyl -ketobutanoate.

5. Clemmension Reduction: The reduction of >C=O group to methyl

group (>CH2) with amalgamated zinc and conc. HCl is known as
Clemmension reduction.
6. Coupling Reaction: The reaction in which a diazonium salt
condenses with an aromatic compound having an electron rich
group eg, aniline, phenol or their derivatives to form an azo
compound (Ar-N=N-Ar) is termed as coupling reaction.

7. Etard Reaction: Chromyl chloride ( CrO2Cl2) oxidizes methyl

group to a chromium complex, which on hydrolysis gives
corresponding benzaldehyde. It is called Etard reaction.

8. Esterification Reaction: Reaction of an alcohol with a carboxylic

acid in the presence of a small quantity of conc.H2SO4 to form an
ester is called esterification.

Esterification process is generally reversible.

9. Finkelstein Reaction: Alkyl iodides can be prepared by the reaction
of alkyl chlorides/ bromides with NaI in dry acetone.

10. Friedel-Craft Reaction: Introduction of an alkyl (-R) or an acyl

(RCO-) group in to the benzene ring of an aromatic compound in
the presence of of a lewis acid catalyst (eg.anhydrous aluminium
chloride or Zinc chloride) is called as Friedel-Craft reaction).
 Introduction of an acyl group (RCO-) is called acylation.
11. Gabriel pthalimide synthesis: This method is used to prepare
primary amine. The various steps involved are:
i) pthalimide is treated with alcoholic solution of KOH to form
potassium pthalimide.
ii) The potassium salt is treated with an alkylhalide.
iii) The product N-alkyl phthalimide is hydrolysed with dilute
HCl to form a primary amine.

12. Gattermann Reaction: Gattermann reaction is used for obtaining

chlorobenzene or bromobenzene from benzenediazonium chloride
by treating it with Cu/HCl or Cu/HBr respectively.

13. Gattermann-Koch Reaction: When benzene or its derivative is

treated with carbon monoxide and HCl in the presence of
 anhydrous aluminium chloride or CuCl, it gives benzaldehyde or
substituted benzaldehyde.

14. Iodoform test: The compound containing methyl group bonded to

carbonyl group (CH3-CO-) or (CH3-CH.OH-) reacts with aquous
NaOH and iodine solution gives yellow ppt of Iodoform.

15. Hell-Volhard-Zelinsky Reaction: When aliphatic carboxylic acid

containing -hydrogen are reacted with chlorine or bromine in
presence of small amount of red phosphorous, the corresponding
-haloacids are obtained.

16. Hinsberg Test: Hinsberg test is employed to distinguish primary,

secondary and tertiary amine. The reagent used in this test is
benzene sulphonyl chloride. The tests are:
a) Primary amine:- It gives sulphonamide with hinsberg reagent,
this sulphonamide is soluble in NaOH or KOH.

B) Secondary amine:-With hinsberg reagent,it forms

sulphonamide, which is insoluble in NaOH or KOH.
 C) Tertiary amine:- Tertiary amine do not react with hinsberg
reagent ,because it is not having replaceable hydrogen.
17. Hoffmann-Bromamide Reaction: When an amide is heated with
bromine and an alkali, a primary amine containing one carbon less
than the amide is obtained. This reaction is called Hoffmann-
Bromamide reaction. This reaction is very useful for converting a
higher homologue to next lower one.

18. Kolbes-Electrolysis process: Preperation of higher a;kanes by the

electrolysis of sodium or potassium salt of lower fatty acids is
called Kolbes electrolysis reaction.

19. Kolbe,s Schmith process: This reaction gives the method for
fixation of CO2 in the benzene ring.Sodium phenoxide on heating
that 120-1400C under 4-7 atm pressure with CO2 gives sodium
salicylate which on reaction with dil.HCl gives salicylic acid(2-
hydroxy benzoic acid).

20. Riemer-Tiemann Reaction: The reaction of pheonal with

chloroform or carbon-tetrachloride in the presence of aqueos alkali
at 340k followed by hydrolysisof the resulting product gives
salicyldehyde and salicylic acid respectively.

21. Rosenmund Reduction: Reduction of acid chloride (RCOCl)to the

corresponding aldehyde with hydrogen using Pd/BaSO4 as catalyst
is known as rosenmund reaction.Here Pd/BaSO4 used as negative
catalyst and prevent further reduction to alcohol.
22. Sandmayer Reaction: The convesion of benzene diazonium salt
into halogen of cyano derivative of the parent aromatic
hydrocarbon by treating it with a mixture containing the
corrsponding salt and the acid is called sandmeyer reaction.

23. Saponification Process: Hydrolysis of esters in the presence of an

alkali is known as saponification.In this process sodium salt of
fattyacids(commonly called as soaps)are obtained.

24. Stephen Reaction: Nitriles can be reduced to corresponding imine

with stannous chloride in the presence of hydrochloric acid, which
on hydrolysis give corresponding aldehyde. This reaction is called
Stephen reaction.

25. Swarts reaction: The synthesis of alkyl fluorides is accomplished

by heating an alkyl chloride/ bromide in the presence of a metallic
fluoride such as AgF,Hg2F2 etc.

26. Williamsons synthesis: In williamson synthesis,when an alkoxide

or a phenoxide is made to react with an alkyl halide,an ether is
obtained.In this method,haloarenes can not be used for the
preparation of alkyl-aryl ethers because of the low reactivity of
aryl halides.
27. Wolf-Kishner reaction: A carbonyl compound on heating
hydrazine and pottassium hydroxide(KOH)in a high boiling polar
solvent such as ethylene glycol,gets reduced to give a hydrocarbon.

28. Wurtz-Fittig Reaction: This reaction is used for obtaining higher

alkane from the halogen derivatives by using sodium.

*******
 HALO ALKANES AND HALO ARENES

Halo alkanes and Halo Arenes find wide applications in industry as well as in
day-to-day life. They are used as solvents for relatively non-polar compounds and
as starting materials for the synthesis of wide range of organic compounds.
Chlorine containing antibiotic, Chloramphenicol, produced by soil
microorganisms is very effective for the treatment of typhoid fever. Our body
produces iodine containing hormone, thyroxine, the deficiency of which causes a
disease called goiter. Synthetic halogen compounds, viz. Chloroquine is used for
the treatment of malaria; halothane is used as an anaesthetic during surgery.
Certain fully fluorinated compounds are being considered as potential blood
substitutes in surgery.
In halo alkanes as size of halogen increases CX bond strength decreases hence
reactivity increases.
Preparation of Halo alkanes from alcohols using Thionyl chloride is preferred
because the other two products are escapable gases.
Preparation of Halo alkanes from alcohols using hydrogen halides, the order of
reactivity of alcohols with a given halo acid is 3>2>1.
The above method is not applicable for the preparation of aryl halides because the
carbon-oxygen bond in phenols has a partial double bond character and is difficult
to break being stronger than a single bond.
Iodination of Arenes with iodine is reversible in nature and requires the presence
of an oxidizing agent (HNO3, HIO4) to oxidise the HI formed during iodination.
Reactions of un saturated hydrocarbons with Bromine water yields colorless alkyl
halides hence it is used as testing for un saturated hydro carbons.
Markovnikovs rule: When un symmetrical alkene under goes addition with un
symmetrical reagent, the major product of alkyl halide one in which, the negative
part of addendum will be added to the carbon having less no. of hydrogen atoms.
Anti Markovnikovs rule: (Peroxide Effect) (Kharausch Effect) When un
symmetrical alkene under goes addition with un symmetrical reagent, the major
product of alkyl halide one in which, the negative part of addendum will be added
to the carbon having more no. of hydrogen atoms.
Alkyl halides are having more boiling point as compare with hydro carbons of
equal molecular mass it is due to dipole- dipole attractions present in it.
For the same alkyl group, the boiling points of alkyl halides decrease in the order:
RI> RBr> RCl> RF. This is because with the increase in size and mass of halogen
atom, the magnitude of van der Waal forces increases.
The boiling points of isomeric halo alkanes decrease with increase in branching
due to decrease in spherical surface area which in turn decreases vander waals
force.
Boiling points of isomeric di halo benzenes are very nearly the same. However,
the para-isomers are high melting as compared to their ortho and meta-isomers. It
is due to symmetry of para-isomers that fits in crystal lattice better as compared
to ortho- and meta-isomers.
 The halo alkanes are only very slightly soluble in water, Energy released during
dissolution is not sufficient to break the hydrogen bond between water molecules.
Groups like cyanides and nitrites possess two nucleophilic centres and are called
ambident nucleophiles.
Halo alkanes react with KCN to form alkyl cyanides as main product while AgCN
forms isocyanides as the chief product. It is because KCN is predominantly ionic
and provides cyanide ions in solution. Although both carbon and nitrogen atoms
are in a position to donate electron pairs, the attack takes place mainly through
carbon atom and not through nitrogen atom since CC bond is more stable than
CN bond. However, AgCN is mainly covalent in nature and nitrogen is free to
donate electron pair forming isocyanide as the main product.
Nucleophilic substitution in alkyl halides fallows two types of mechanisms, SN1
(Substitution of Nucleophile fallows first order kinetics) & SN2 (Substitution of
Nucleophile fallows Second order kinetics).
SN1 reaction mechanism is followed by those alkyl halides whose carbo cation is
stable like tertiary alkyl halides, Allyl halides & Benzyl halides. It forms carbo
cation intermediate, which is triangular planar & SP2 hybridized intermediate. If
alkyl halide is optically active after substitution it forms racemic mixture.
SN2 reaction mechanism is followed by primary alkyl halide (whose carbanion is
stable). It forms carbanion intermediate, which is sp3d hybridized and
pentavalent. During SN2 mechanism optical activity is reversed this is known as
optical inversion.
Molecules which are able to rotate plane polarized light are called optically active
compounds.
Light whose waves oscillate in only one plane is known as plane polarized light.
Non super imposable mirror images are called Enantiomers.
Substances which rotate plane polarized light are called dextro and one which
rotates towards left is known as leavo rotatory compound.
In a molecule if Carbon atom is surrounded by four different groups called
asymmetric carbon or chiral carbon which is must for optical active compound.
1:1 ratio of dextro and leavo mixture is known as racemic mixture.
The process of conversion of enantiomer into a racemic mixture is known as
racemisation.
Secondary alkyl halides undergoes both SN1 & SN2 mechanism.
If there is possibility of formation of more than one alkene due to the availability
of more than one -hydrogen atoms, usually one alkene is formed as the major
product. These form part of a pattern first observed by Russian chemist, Saytzeff
who in 1875 formulated a rule which can be summarized as
in dehydrohalogenation reactions, the preferred product is that alkene which has
the greater number of alkyl groups attached to the doubly bonded carbon atoms.
An alkyl halide with -hydrogen atoms when reacted with a base or a nucleophile
has two competing routes: substitution (SN1 and SN2) and elimination. Which
route will be taken up depends upon the nature of alkyl halide, strength and size
of base/nucleophile and reaction conditions. Thus, a bulkier nucleophile will
prefer to act as a base and abstracts a proton rather than approach a tetravalent
carbon atom (steric reasons) and vice versa.
 Aryl halides are extremely less reactive towards nucleophilic substitution
reactions due to the Resonance effect (partial double bond ), halogen bonded to
sp2 carbon which is more electronegative and less bond length, instability of
phenyl cation & repulsion between electron rich arenas, nucleophile.
Nucleophilic substitution on aromatic rings becomes easy in the presence of
electron with drawing groups like nitro which stabilize the carbanaion. This
effect is not shown when nitro group is present at meta position.
Although chlorine is an electron withdrawing group, yet it is ortho-, para-
directing in electrophilic aromatic substitution reactions. Chlorine withdraws
electrons through inductive effect and releases electrons through resonance. Through
inductive effect, chlorine destabilizes the intermediate carbocation formed during the
electrophilic substitution. Through resonance, halogen tends to stabilize the
carbocation and the effect is more pronounced at ortho- and para- positions. The
inductive effect is stronger than resonance and causes net electron
withdrawal and thus causes net deactivation. The resonance effect tends to
oppose the inductive effect for the attack at ortho- and para positions and hence
makes the deactivation less for ortho- and para attack. Reactivity is thus
controlled by the stronger inductive effect and orientation is controlled by
resonance effect.
Chloroform is slowly oxidized by air in the presence of light to an extremely
poisonous gas, carbonyl chloride, also known as phosgene. It is therefore stored in
closed dark colored bottles completely filled so that air is kept out.

ALCOHOLS, PHENOLS & ETHERS

The bond angle in alcohols is slightly less than the tetrahedral angle (109-28). It
is due to the repulsion between the unshared electron pairs of oxygen.
In phenols, the OH group is attached to sp2hybridised carbon of an aromatic
ring. The carbon oxygen bond length (136 pm) in phenol is slightly less than that
in methanol. This is due to (i) partial double bond character on account of the
conjugation of unshared electron pair of oxygen with the aromatic ring and (ii)
sp2 hybridized state of carbon to which oxygen is attached.
The bond angle is slightly greater than the tetrahedral angle due to the repulsive
interaction between the two bulky (R) groups. The CO bond length (141 pm) is
almost the same as in alcohols.
Hydroboration-oxidation of alkenes gives addition of water to alkene as per anti
Markovnikovs rule.
The boiling points of alcohols and phenols are higher in comparison to other
classes of compounds, namely hydrocarbons, ethers, haloalkanes and haloarenes
of comparable molecular masses. The high boiling points of alcohols are mainly
due to the presence of intermolecular hydrogen bonding in them which is lacking
in ethers and hydrocarbons.
Solubility of alcohols and phenols in water is due to their ability to form hydrogen
bonds with water molecules. The solubility decreases with increase in size of
alkyl/aryl (hydrophobic) groups.
Alcohols are weak Bronstead acids i.e. they can donate proton to a stronger base.
 The acidic character of alcohols is due to the polar nature of OH bond. An electron-
releasing group (CH3, C2H5) increases electron density on oxygen tending to
decrease the polarity of O-H bond. This decreases the acid strength. Hence acidity
of alcohols is 10>20>30 alcohols.
Alcohols act as Bronsted bases as well. It is due to the presence of unshared
electron pairs on oxygen, which makes them proton acceptors.
Alcohols and phenols react with Na metal gives hydrogen gas it supports the
acidic nature. But Phenol even reacts with NaOH hence phenol is strong base
than alcohol. It is due to the resonance stability of Phenoxide ion.
Electron releasing groups on alcohol and phenol decrease acidity and electron
withdrawing groups increase acidity. Because electron withdrawing groups
stabilize the phenoxide/alkoxide ions. More Ka or Less PKa value indicates
higher acidity.
the relative ease of dehydration of alcohols follows the following order:
Tertiary > Secondary > Primary it is due to stability of carbocation.
The usual halogenation of benzene takes place in the presence of a Lewis acid,
such as FeBr3, which polarizes the halogen molecule. In case of phenol, the
polarization of bromine molecule takes place even in the absence of Lewis acid. It
is due to the highly activating effect of OH group attached to the benzene ring.
The commercial alcohol is made unfit for drinking by mixing in it some copper
sulphate (to give it a color) and pyridine (a foul smelling liquid). It is known as
denaturation of alcohol.
The dehydration of secondary and tertiary alcohols to give corresponding ethers is
unsuccessful as elimination competes over substitution and as a consequence,
alkenes are easily formed.
The weak polarity of ethers do not appreciably affect their boiling points which
are comparable to those of the alkanes of comparable molecular masses but are
much lower than the boiling points of alcohols. The large difference in boiling
points of alcohols and ethers is due to the presence of hydrogen bonding in
alcohols.
The miscibility of ethers with water resembles those of alcohols of the same
molecular mass. This is due to the fact that just like alcohols, oxygen of ether can
also form hydrogen bonds with water.
The order of reactivity of hydrogen halides is as follows: HI > HBr > HCl.
Reaction of anisole with HI gives Phenol & methyl iodide but not other products
because there is a partial double bond character between Benzene ring and
Oxygen.
Tertiary butyl methyl ether react with HI gives Methanol and tertiary butyl Iodide
it is due to stability of tertiary carbocation.
10,20 &30 alcohols are distinguished by Lucas Test. Lucas reagent is HCl + ZnCl2
tertiary amines react with Lucas reagent and cloudiness forms immediately,
secondary amines react with Lucas reagent and cloudiness forms after 5 mts,
primary amines react with Lucas reagent and cloudiness forms only by heating.
 ALDEHYDES, KETONES AND CARBOXYLIC ACIDS

The boiling points of aldehydes and ketones are higher than hydrocarbons and
ethers of comparable molecular masses. It is due to weak molecular association in
aldehydes and ketones arising out of the dipole-dipole interactions. Also, their
boiling points are lower than those of alcohols of similar molecular masses due to
absence of intermolecular hydrogen bonding.
The lower members of aldehydes and ketones such as methanal, ethanal and
propanone are miscible with water in all proportions, because they form hydrogen
bond with water. However, the solubility of aldehydes and ketones decreases
rapidly on increasing the length of alkyl chain.
The carbon atom of the carbonyl group of benzaldehyde is less electrophilic than
carbon atom of the carbonyl group present in propanal. The polarity of the
carbonyl group is reduced in benzaldehyde due to resonance and hence it is less
reactive than propanal.
Sodium hydrogensulphite adds to aldehydes and ketoses to form the addition products by
equilibrium reaction. The position of the equilibrium lies largely to the right hand side for
most aldehydes and to the left for most ketones due to steric reasons. The hydrogensulphite
addition compound is water soluble and can be converted back to the original carbonyl
compound by treating it with dilute mineral acid or alkali. Therefore, these are useful for
separation and purification of aldehydes.
Addition of ammonia derivatives to the aldehydes & ketones takes place under controlled PH
because reaction takes place by acid catalyzed mechanism, if acidity is more it react with
ammonia derivatives (bases).
Carboxylic acids are higher boiling liquids than aldehydes, ketones and even
alcohols of comparable molecular masses. This is due to more extensive
association of carboxylic acid molecules through intermolecular hydrogen
bonding.
Characteristic reactions of aldehydes and ketones are not given by carboxylic
acids in spite of having C=O it it due to resonance stabilization of carboxylic
group.
Aliphatic carboxylic acids having 12 to 18 carbon atoms are known as fatty acids.
The solubility decreases with increasing number of carbon atoms. Higher
carboxylic acids are practically insoluble in water due to the increased
hydrophobic interaction of hydrocarbon part.
Quantitatively acidity of carboxylic acids are compared by using Ka acid
dissociation constant or PKa values. Higher Ka value or less PKa represents strong
acids.
Smaller the pKa, the stronger the acid ( the better it is as a proton donor). Strong
acids have pKa values < 1, the acids with pKa values between 1 and 5 are
considered to be moderately strong acids, weak acids have pKa values between 5
and 15, and extremely weak acids have pKa values >15.
Carboxylic acids are weaker acids as compare with mineral acids like HCl,
H2SO4.HNO3 but stronger acids than alcohol and phenol.
Carboxylic acids are strong acids than Phenol it is due to high stability of
carboxylate ion as compare to Phenoxide ion. Negative charge is distributed on
 two equally electronegative atoms where as in phenol it is distributed on two un
equal atoms.
Electron withdrawing groups increase the acidity of carboxylic acids by
stabilizing the conjugate base through delocalization of the negative charge by
inductive and/or resonance effects. Conversely, electron donating groups decrease
the acidity by destabilizing the conjugate base.
The effect of the following groups in increasing acidity order is
Ph < I < Br < Cl < F < CN < NO2 < CF3
Aromatic carboxylic acids undergo electrophilic substitution reactions in which
the carboxyl group acts as a deactivating and meta-directing group. They
however, do not undergo Friedel-Crafts reaction (because the carboxyl group is
deactivating and the catalyst aluminum chloride (Lewis acid) gets bonded to the
carboxyl group).

AMINES

In nature, Amines occur among proteins, vitamins, alkaloids and hormones.

Synthetic examples include polymers, dyestuffs and drugs. Two biologically
active compounds, namely adrenaline and ephedrine, both containing secondary
amino group, are used to increase blood pressure. Novocain, a synthetic amino
compound, is used as an anesthetic in dentistry. Benadryl, a well known
antihistaminic drug also contains tertiary amino group. Quaternary ammonium
salts are used as surfactants. Diazonium salts are intermediates in the preparation
of a variety of aromatic compounds including dyes.
Ammonolysis of alkyl halides gives amines, but it has the disadvantage of
yielding a mixture of primary, secondary and tertiary amines and also a
quaternary ammonium salt. However, primary amine is obtained as a major
product by taking large excess of ammonia. The order of reactivity of halides
with amines is RI > RBr >RCl.
Gabriel synthesis is used for the preparation of primary amines. Phthalimide on
treatment with ethanolic potassium hydroxide forms potassium salt of phthalimide
which on heating with alkyl halide followed by alkaline hydrolysis produces the
corresponding primary amine. Aromatic primary amines cannot be prepared by
this method because aryl halides do not undergo nucleophilic substitution with the
anion formed by phthalimide.
Lower aliphatic amines are soluble in water because they can form hydrogen
bonds with water molecules. However, solubility decreases with increase in molar
mass of amines due to increase in size of the hydrophobic alkyl part. Higher
amines are essentially insoluble in water.
Equal molecular masses of amines & alcohols, alcohols are more polar than
amines and form stronger intermolecular hydrogen bonds than amines.
This intermolecular association is more in primary amines than in secondary
amines as there are two hydrogen atoms available for hydrogen bond formation in
it. Tertiary amines do not have intermolecular association due to the absence of
 hydrogen atom available for hydrogen bond formation. Therefore, the order of
boiling points of isomeric amines is as follows:
Primary > Secondary > Tertiary
Amines have an unshared pair of electrons on nitrogen atom due to which they
behave as Lewis base. Basic character of amines can be better understood in
terms of their Kb and pKb values.
Larger the value of Kb or smaller the value of pKb, stronger is the base.
Basisity of amines in gaseous state increased by +ve inductive effect, but in
aqueous state apart from +I effect it also depends on hydration effect & steric
effect.
The order of basicity of amines in the gaseous phase follows the expected order:
tertiary amine > secondary amine > primary amine > NH3.
The order of basic strength in case of methyl substituted amines and ethyl
substituted amines in aqueous solution is as follows:
(C2H5)2NH > (C2H5)3N > C2H5NH2 > NH3
(CH3)2NH > CH3NH2 > (CH3)3N > NH3
pKb value of aniline is quite high than ammonia . It is because in aniline or other
aryl amines, the -NH2 group is attached directly to the benzene ring. It results in
the unshared electron pair on nitrogen atom to be in conjugation with the benzene
ring and thus making it less available for protonation.
In case of substituted aniline, it is observed that electron releasing groups like
OCH3, CH3 increase basic strength whereas electron withdrawing groups like
NO2, SO3, COOH, X decrease it.
Reaction of nitrous acid with different amines gives different products.
Primary aliphatic amines gives alcohols, primary aromatic amines gives
diazonium chloride, secondary aliphatic and aromatic amines gives N-Nitroso
amines, tertiary aliphatic amines gives quaternary ammonium nitrite where as
tertiary aromatic amines gives p-nitroso aniline.
10,20 & 30 amines are distinguished by Hinsbergs test i.e. primary amine react
with Hinsbergs reagent (Benzene Sulphonyl Chloride) and resulting compound is
soluble in KOH, secondary amine react with B.S.C and resulting compound is
insoluble in KOH, tertiary amines do not react with B.S.C.
Aniline is more reactive for electrophilic substitution due to involvement of lone
pair on nitrogen makes benzene ring activated towards electrophilic substitution.
This effect is minimized by adding acyl group on nitrogen. The lone pair of
electrons on nitrogen of acetanilide interacts with oxygen atom due to resonance
as shown below: Hence, the lone pair of electrons on nitrogen is less available for
donation to benzene ring by resonance. Therefore, activating effect of
NHCOCH3 group is less than that of amino group.
Nitration aniline gives ortho, para & meta nitro aniline mixture of compounds.
Though NH2 is a o-p directing it forms substantial amount of meta product also
it is due to in strongly acidic medium, aniline is protonated to form the anilinium
ion which is meta directing. That is why besides the ortho and para derivatives,
significant amount of meta derivative is also formed.
Sulphonation aniline forms sulphonilic acid which forms zwitter ion.
 The conversion of primary aromatic amines into diazonium salts by reacting with
nitrous acid at 0-50C is known as diazotization .
Benzene diazonium chloride reacts with phenol in which the phenol molecule at
its para position is coupled with the diazonium salt to form p-hydroxyazobenzene.
This type of reaction is known as coupling reaction. Similarly the reaction of
diazonium salt with aniline yields p-amino azo benzene. This is an example of
electrophilic substitution reaction.

*******
 ORGANIC CONVERSIONS (text book)

1. Identify the A,B,C,D,E,R & R in the following:

(i) Br + Mg dry Ether A H 2O

(ii) RBr + Mg dry ether C D 2O CH-CHD-CH3

(iii) RX Na/ ether

(iv) RX Mg/ ether D H2 O E

2. A hydrocarbon C5H10 does not react with chlorine in dark but gives a single
monochloro compound C5H9Cl in bright sun light. Identify the hydro carbon.
Ans: CH2=CH-CH2-CH-CH3 + Cl2 hv CH2=CH-CH2-CH-CH2-Cl
3. Write the equations for the preparation of 1-Iodo butane from :
(i) 1 butanol (ii) 1- chloro butane (iii) But-1-ene
Ans: CH3-CH2-CH2-CH2-OH + HI or (P4+ I2 ) CH3-CH2-CH2-CH2-I
CH3-CH2-CH2-CH2-Cl + NaI CH3-CH2-CH2-CH2-I
CH3-CH2=CH2-CH3 + HI CH3-CH2-CH2-CH2-I
4. Predict the product from the following reactions:

CH3
C2H5ONa
Br Ethanol
C2H5ONa
CH3-CClCH3-CH2-CH3 Ethanol

C2H5ONa
Ethanol

Br

1. How will you bring about following conversions:

(i) Ethanol to but-1-yne
(ii) Ethane to bromoethene
(iii) Propene to 1-nitropropane
(iv) Toluene to benzyl alcohol
(v) Propene to propyne
(vi) Ethanol to ethyl fluoride
(vii) Bromomethane to propanone
(viii) But-1-ene to but-2-ene
(ix) 1-Chlorobutane to n-octane
 (x) Benzene to biphenyl.
2. Propene to propan-1-ol
3. Ethanol to but-1-yne
4. 1-Bromopropane to 2-bromopropane
5. Toluene to benzyl alcohol
6. Benzene to 4-bromonitrobenzene
7. (vi) Benzyl alcohol to 2-phenylethanoic acid
8. Ethanol to propanenitrile
9. Aniline to chlorobenzene
10. 2-Chlorobutane to 3, 4-dimethylhexane
11. 2-Methyl-1-propene to 2-chloro-2-methylpropane
12. Ethyl chloride to propanoic acid
13. But-1-ene to n-butyliodide
14. 2-Chloropropane to 1-propanol
15. Isopropyl alcohol to iodoform
16. Chlorobenzene to p-nitrophenol
17. 2-Bromopropane to 1-bromopropane
18. Chloroethane to butane
19. Benzene to diphenyl
20. tert-Butyl bromide to isobutyl bromide
21. Aniline to phenylisocyanide
22. Phenol into o-nitro Phenol
23. Phenol into Tri nitro phenol
24. Propene Propan-2-ol.
25. Benzyl chloride Benzyl alcohol.
26. Ethyl magnesium chloride Propan-1-ol.
27. Methyl magnesium bromide 2-Methylpropan-2-ol.
28. Propanone to Propene
29. Benzoic acid to Benzaldehyde
30. (Ethanol to 3-Hydroxybutanal
31. Benzene to m-Nitroacetophenone
32. Benzaldehyde to Benzophenone
33. Bromobenzene to 1-Phenylethanol
34. Benzaldehyde to 3-Phenylpropan-1-ol
35. Benazaldehyde to -Hydroxyphenylacetic acid
36. (ix) Benzoic acid to m- Nitrobenzyl alcohol
37. Benzene into aniline
38. (ii) Benzene into N, N-dimethylaniline
39. Cl(CH2)4Cl into hexan-1,6-diamine?
40. Ethanoic acid into methanamine
41. Hexanenitrile into 1-aminopentane
42. Methanol to ethanoic acid
43. (iv) Ethanamine into methanamine
44. Ethanoic acid into propanoic acid
45. Methanamine into ethanamine
46. Nitromethane into dimethylamine
47. Propanoic acid into ethanoic acid?
48. Nitrobenzene to benzoic acid
49. Benzene to m-bromophenol
50. Benzoic acid to aniline
51. Aniline to 2,4,6-tribromofluorobenzene
52. Benzyl chloride to 2-phenylethanamine
53. Chlorobenzene to p-chloroaniline
54. Aniline to p-bromoaniline
55. Benzamide to toluene
56. Aniline to benzyl alcohol.

Some Important Conversions

1. 2- Bromo Propane into 1 Bromo Propane
2. Propan-2-ol into Propan -1- ol
3. Formaldehyde into Propan -1- ol
4. Acetaldehyde into Propan -2-ol
5. Acetone into t-Butyl alcohol
6. Aneline into Phenol
7. Cumene into Phenol
8. Phenol into salicylic Acid
9. Phenol into 2 Acetoxy Benzoic Acid ( Aspirine)
10. Propan -1-ol into 2-Bromo Propane
11. Phenol into Benzaldehyde
12. Phenol into Salcilaldehyde
13. Ethano into diethyl ether
14. Ethyl chloride into propanal
15. Benzene into Benzaldehyde
16. Acetic acid to acetaldehyde
17. Acetic acid into acetone
18. Acetonitrile into Benzo phenone
19. Acetaldehyde into lactic acid
20. Acetaldehyde into crotanaldehyde (But-2enal)
21. Acetaldehyde into Butan-1-ol
22. Acetaldehyde into But-2enoic acid
23. Acetaldehyde into Butane2,4 diol
24. Acetone into 4-methyl pent-3ene-2-one
25. Benzene into Benzoic acid
26. Benzoic acid into Aneline
27. Chloro Benzene into Benzoic acid
28. Benzyl alcohol into Phenyl ethanoic acid
29. 3-nitro Bromo Benzene into 3-nitro Benzoic acid
30. 4-methyl Acetophenone into terphthalic acid
31. cyclo hexane into adipic acid
32. Phthalic acid into phthalamide
33. Acetic acid into Malonic acid
34. Acetic Acid into Alanine
35. Benzene into methyl Benzoate
36. Benzene into m-nitro Benzoic acid
37. Benzene into p-nitro Benzoic acid
38. Benzene into Phynyl Acetic acid
39. Benzene into p-nitro Benzaldehyde
40. Benzene into Aneline
41. Ethyl chloride to propanamine
42. Ethyl amine into Ethyl Carbyl amine
43. Aneline into 4-bromo Aneline
44. Aneline into 4-Nitro Anelien
45. Aneline into Sulphanilic acid
46. Aneline into Acetanilide
47. Phenol into Phenyl Acetate
48. Aneline into Floro Benzene
49. Aneline into Nitro Benzene
50. Aneline into Phenol
51. Aneline into Benzoic Acid
52. Aneline into Benzene
53. 4-Nitro Toluene into 2-Bromo Benzoic Acid
54. 3-methyl Aneline into 3-Nitro Toluene
55. Acetic Acid to Methanol
56. Ethyl Bromide into Propan-1-ol
57. Benzamide into Toluene
58. Aneline into Benzyl alcohol
59. Benzoic Acid into Aneline
60. Benzene into m-bromo phenol
61. Propanoic acid into Ethanoic acid
62. Methanamine into Ethanamine
63. Ethanoic Acid into Propanoic Acid
64. Ethanamine into Methanamine
65. Benzoic Acid into m-nitro Benzyl alcohol
66. Benzaldehyde into alpha hydroxyl phenyl Acetic acid
67. Benzaldehyde into 3-Phenyl Propan-1-ol
68. Benzaldehyde into Benzophenone
69. Benzene into m-nitro Acetophenone
70. Propanone into Propene
71. Ethyl Chloride into Propanoic acid
72. Ethanol into Propanol
73. Ethanol into Propanoic Acid
74. Toluene into Benzyl alcohol
75. Ethanol into But-1-yne
 76. Propene into Propyne

CH3CH2I NaCN A Partial Hydrolysis B NaOH/Br2 C

OH-
Diazonium Chloride into Benzamide
Ethyl Bromide into Propan-1-ol
Acetic Acid into Methanol

SOME WORD PROBLEMS

1.Write structural formulae of the organic compounds A,B,Cand D in the

following sequence of reactions: A +CH3MgBr H2O CH3CH2CH(OH)CH3
conc H2SO4 B Br2 C alc.KOH D
2. Etherical solution of an organic compound A when heated with magnesium gave B.
B on treatment with wthanal followed by acid hydrolysis gave 2-propanol. Identify the
compound A. what is B known as?
3. A organic compound A (molecular formula C3H6O) is resistant to oxidation but
forms a compound B (C3H8O) on reduction. B reacts with HBr to form a bromide C
which on treatment with alcoholic KOH forms an alkene D (C3H6). Deduce the
structures of A,B,C and D.
4. A compound A which has characteristic odour, on treatment with NaOH forms two
compounds B and C. compound B has the molecular formula C7H8O which on
oxidation gives back compound A. Compound C is the sodium salt of an acid , C
when heated with soda lime yields an aromatic hydrocarbon D. Deduce the structures of
A,B,C and D.
5. An organic compound A has the molecular formula C5H10O. it does not reduce
Fehling solution but forms a bisulphate compound. It also gives positive iodoform test.
What are possible structures of A?
6. A compound A with molecular formula C5H10 O gave a positive 2,4-DNP test but a
negative Tollen,s test. It was oxidized to carboxylic acid B with molecular formula
C3H6O2. Sodium salt of B gave a hydrocarbon C on Kolbes electrolytic reduction.
Identify A,B and C and write the chemical equations for the reaction.
7. When phenol heated with Zn it forms A. A converts in to B when reacts with
conc.HNO3 in presence of sulphuric acid. B converts in to C when it reacts with Br2.
C converts into E by hydrogenation followed by reaction with nitrous acid/HCl.
Finally it converts into F by acidic hydrolysis. Identify A,B,C,D,E and F.
8. An aliphatic compound A with a molecular formula of C3H6O reacts with phenyl
hydrazine to give compound B. Reaction of A with I2 in alkaline medium on warming,
gives a yellow ppt C. Identify compound A,B and C.
9. Two moles of organic compound A on treatment with a strong base gives two
compound B and C. Compound B on hydrogenation with Cu gives A while
acidification of C yields carboxylic acid D, having molecular formula of CH2O2.
identify the compounds A,B,C and D.
10. An organic compound A having molecular formula C8H16O was hydrolysed with
dilute sulphuric acid to give a carboxylic acid B and an alcohol C. oxidation of C
with chromic acid produces B. Write IUPAC names for possible structures of A and
equations for the reactions involved.
11. A compound A of molecular formula C3H7O2N on reaction with Fe and conc.HCl
gives a compound B of molecular formula C3H9N. compound B on treatment with
NaNO2 and HCl gives another compound C of molecular formula C3H8O. Compound
C gives effervescence with Na. on oxidation with CrO3, the compound C gives a
saturated aldehyde containing three carbon atoms. Deduce the structures of A,B and C
and write the equations for the reactions involved.
12. A compound X having molecular formula C3H7NO, reacts with Br2 in presence of
NaOH gives compound X. the compound X reacts with HNO2 to form ethanol and N2
gas. Identify the compound X and Y and write the reactions involved.
13. An aliphatic compound A with molecular formula C2H3Cl on treatment with AgCN
gives two isomeric compounds of unequal amounts with the molecular formula C3H3N.
The minor of these two products on complete reduction with H2 in the presence of Ni
gives a compound B with a molecular formula C3H9N. identify the compounds A,B and
write the reactions involved.
14. Iodomethane reacts with KCN to form a major product A. Compound A on
reduction in presence of LiAlH4 forms a higher amine B. Compound B on treatment
with CuCl2 forms a blue colour complex C. Identify the compounds A,B and C.
15. An organic compound A having molecular formula C2H3N on reduction gave
another compound B. The Compound B on treatment with HNO2 gave ethyl alcohol.
B on warming with CHCl3 and alcoholic potash gave an offensive smelling substance
C. Identify A,B and C.
16. Two isomeric compounds A and B having molecular formula C4H11N, both loose N2
on treatment with HNO2 and gives compound C and D respectively. C is resistant to
oxidation but immediately responds to Lucas reagent, whereas D responds to Lucas
reagent after 5 minutes and gives a positive iodoform test. Identify A and B.

Primary alkyl halide C4H9Br (a) reacted with alcoholic KOH to give compound (b).
Compound (b) is reacted with HBr to give (c) which is an isomer of (a). When
(a) is reacted with sodium metal it gives compound (d), C8H18 which is different
from the compound formed when n-butyl bromide is reacted with sodium.
Give the structural formula of (a) and write the equations for all the reactions.

An organic compound with the molecular formula C9H10O forms 2,4-DNP derivative,
reduces Tollens reagent and undergoes Cannizzaro reaction. On vigorous oxidation,
it gives 1,2-benzenedicarboxylic acid. Identify the compound.

An organic compound (A) (molecular formula C8H16O2) was hydrolysed with

dilute sulphuric acid to give a carboxylic acid (B) and an alcohol (C). Oxidation
of (C) with chromic acid produced (B). (C) on dehydration gives but-1-ene.
Write equations for the reactions involved.

An organic compound contains 69.77% carbon, 11.63% hydrogen and rest oxygen.
The molecular mass of the compound is 86. It does not reduce Tollens reagent
but forms an addition compound with sodium hydrogensulphite and give positive
iodoform test. On vigorous oxidation it gives ethanoic and propanoic acid. Write
the possible structure of the compound.

An aromatic compound A on treatment with aqueous ammonia and heating

forms compound B which on heating with Br2 and KOH forms a compound C
of molecular formula C6H7N. Write the structures and IUPAC names of compounds
A, B and C.

*******
S.No. Reagent Function
1 PCl3, PBr3, PI3 Alcohols into Alkyl halides
2 SoCl2, PCl5 Alcohols into Alkyl chlorides &
Carboxylic acids into Acid Chlorides
3 HCl/ZnCl2,HBr,HI Alcohols into alkyl halides
4 Cl2/Fe or FeCl3 Cl group substituting on Benzene
0
5 NaNO2 /HCl 0-5 C Diazotisation
6 CuCl,CuBr,CuCN,KI,H2O, Diazonium Cholride into Chlor Benzene,
H3PO2 Bromo Benzene, Benzo nitrile, Iodo
Benzene , Phenol,Benzene respectively
7 HBF4 or NaBF4 Diazonium Chloride into Floro Benzene
8 AgF or Hg2F2 or SbF3 or Alkyl halides into alkyl florides
CoF2
9 Na / dry ether Alkyl halides into alkanes
10 NaOH 623/443/368K Chloro benzene to phenol
11 Br2 /FeBr3 Bromination of Benzene
12 Cl2 /FeCl3 Chlorination of Benzene
13 CH3Cl /AlCl3 alkylation of benzene and its derivatives
14 CH-CO-Cl /AlCl3 Acylation on benzene
15 H2SO4 /HNO3 Nitration of benzene
16 (CHCO)2O /AlCl3 O Acylation of Phenol
17 H2SO4 Sulphonation on Benzene
18 H2O/ H2SO4 alkenes into alcohols
Aq KOH Alkyl halide into alcohol
-
19 BH3 /H2O2 /OH Alkenes into alcohols (Anti
Markownikoff product)
20 NaBH4/ LiAlH4(LAH) Aldehydes, ketones, acids into alcohols,
Nito & Cynides , Isocyanides into amines
21 H2/ Ni or H2/Pd reduction of aldehydes, ketones and
cynides
+
22 RMgX/H3O Aldehydes, ketones into alcohls
+
23 O2/H Cumene to phenol
24 Na Alcohol or phenol into Sodium
alkoxide/Phenoxide
25 (CHCO)2O/ CH-CO-Cl O acylation on phenol or N acylation on
Aneline or amine
26 Conc.H2SO4/443K Conversion of primary alcohols into
Alkenes
27 Conc.H2SO4/410K Conversion of alcohols into Ethers
28 85% H3PO4 / 440K Secondary alcohol into alkene
29 20% H3PO4/358K Tertiary alcohol into alkene
Alcoholic KOH Alkyl halide into alkene
30 CrO3/KMnO4 or K2Cr2O7 oxidation of alcohols into acids
in acidic medium
31 Cu /573k dehydrogenation of alcohols gives 10
alcohols into aldehydes and 20 alcohols
into ketones & 30 alcohos into alkenes
32 Dil. HNO3 Mono nitration of Phenol
33 Conc.HNO3 tri nitration of phenol
34 Br2 /H2O tri bromination of phenol
35 Br2 /Cs2 mono bromination of phenol
36 NaOH /CO2 Phenol to salicilic acid
37 CHCl3 /NaOH Phenol to salcilaldehyde
38 Zn dust Phenol to Benzene
39 Na2Cr2O7 /H2SO4 or air Phenol to Benzo quinone
40 Zn/Cr2O3 200to 300 atm CO & H into methanol
573 673K
41 Invertase Sucrose into Glucose or Fructose
42 Zymase Glucose or Fructose into ethanol
43 HI Ether into alcohol & alkyl halide
44 PCC alcohol to aldehyde
45 Pd /BaSO4,H2 acid chloride into aldehyde
46 SnCl2/HCl/H3O+ Cyanides into aldehydes
47 AlH(i-Bu)2/H2O Cyanides into aldehydes
48 DIBAL-H/H2O Esters into aldehydes
49 CrO2Cl2/H2O Toluene to aldehyde
50 CrO3 /(CH3CO)2O Toluene into Benzaldehyde
51 Cl2/hv Chlorination on alkyl group of Benzene or
alkane
52 CO, HCl anhydrous AlCl3 Benzene to Benzaldehyde
53 (CH3)2Cd acid chloride into ketones
54 RMgX/H3O+ Cyanides into ketones
55 HCN Carbonyl compound into cyanohydrin
56 NaHSO3 addition to aldehyde and ketone
57 H2NOH carbonyl compound into oxime
58 H2N-NH2 carbonyl compound into hydrazone
59 H2N-NH-Ph carbonyl compound into Phenyl
hydrazone
60 2,4DNP carbonyl compound into 2,4 dinitro
phynyl hydrazone
61 H2N-NH-CO-CH3 carbonyl compound into semi carbazide
62 ROH/HCl Aldehydes & ketones into hemiacetal and
acetal
63 HO-CH2-CH2-OH/HCl Aldehyde or ketone into ethelene glycol
ketone
64 Zn-Hg/HCl carbonyl compound into alkane
65 H2N-NH2 /KOH carbonyl compound into alkane
66 KMnO4/OH-/ K2Cr2O7 Ketones into mixture of carboxylic acids
/H2SO4 or HNO3 on prolonged oxidation
67 (Ag(NH3)2)NO3+NaOH Tollens test
68 Cu(OH)2 Fehilings test
69 NaOH+I2 Iodoform
70 NaOH or Ba(OH)2 aldal condensation
71 Conc KOH or NaOH Cannizaros reaction
72 KMnO4 /KOH Toluene/alkyl Benzene into Benzoic Acid
73 H2O/H+ Cyanides into carboxylic acids, amides
into carboxylic acids, esters into
carboxylic acis and alcohols, acid
chlorides or anhydrides into carboxylic
acids
74 NaOH Saponificaiton of ester, acid into salt of
acid
75 Na2CO3 or NaHCO3 Carboxylic acid test
76 P4O10 or P2O5 Dehydration of acids into anhydride,
amides into nitriles
77 ROH/conc H2SO4 Caroxylic acids into esters
78 PCl3, SoCl2, PCl5 Carboxylic acids into acid chlorides
79 NH3 heating Carboxylic acids into amides
80 NaOH/CaO Decarboxylation (acids into alkanes)
81 LiAlH4 Carboxylic acids into alcohols, amides
into amines
82 Cl2 /red.P4 HVZ reaction
83 Sn /HCl or Fe /HCl, H2/Pd Reduction of nitro compounds into
amines
84 NH3 Alkyl halides into amines
85 H2/ Ni or H2/Pd LiAlH4 Amides into cyanindes
86 KOH/R-X Phthalamide into amine
87 NaOH /Br2 Hoffman bromamide, amide into amine
with one C less
88 KOH,CHCl3 Amines into Carbyl amines
89 NaNO2/HCl 10 aliphatic amines into alcohols
90 NaNO2/HCl 0 50C Aniline into diazonium chloride
91 C6H5SO2Cl Distinguishing 10,20 & 30 amines
92 Br2/H2O Aneline into tri bromo aniline
93 Br2/ CH-CO-Cl Aniline into Bromo Aniline
/(CHCO)2O
94 HNO3/ CH-CO-Cl Nitro aniline
/(CHCO)2O
95 H2SO4 Sulphonation on aniline
96 CuCl,CuBr,CuCN,KI,H2O, Diazonium Cholride into Chlor Benzene,
H3PO2 or CH3-CH2-OH Bromo Benzene, Benzo nitrile, Iodo
Benzene , Phenol,Benzene respectively

*******
 REASONING QUESTIONS IN ORGANIC CHEMISTRY
TEXT EXERCISE
1. Why is sulphuric acid is not used during reaction of alcohols with KI?
Ans: Sulphuric acid converts the KI into HI and then oxidizes into I2
2. Arrange each set of compounds in order of increasing boiling poings.
(i) Bromo Ethane , Bromoform, Chloro methane, Dibromo methane
(ii) 1-Chloro Propane, Isopropyl chloride, 1-chloro butane
Ans: Chloro Methane(CH3Cl) < Bromo Ethane(CH3-CH2-Br) < Dibromo
Mehane(CH2Br2) < Bromoform (CHBr3)
CH3CHCl-CH3 < CH3-CH2-CH2Cl < CH3-CH2-CH2-CH2-Cl
As atomic mass increases boiling point increases. And branching compounds
has less spherical contact as compare with straight chain compounds. Hence bp less
for branching chain alkyl halides.
3. Which of the following undergo SN2 faster?

(i) Cl CH2Cl

(i) I Cl

Ans: CH2Cl is more faster under go SN2 because it is Primary alkyl halide

I is more faster to under go SN2 mechanism because I is better

leaving group due to its large size.
4. Predict the order of reactivity of the following compounds in SN1 & SN2 reactions.
(i) The four isomeric bromo butanes
(ii) C6H5CH2Br, C6H5CH2 (C6H5 )Br, C6H5CH2 (CH3)Br, C6H5CH2 (CH3 )(C6H5 )Br
Ans: CH3-CH2-CH2-CH2-Br< CH3- CHCH3- CH2- Br < CH3-CH2-CHBr CH3<
C(CH3)3Br order for SN1 mechanism
CH3-CH2-CH2-CH2-Br> CH3- CHCH3- CH2- Br > CH3-CH2-CHBr CH3>
C(CH3)3Br order for SN2 mechanism
C6H5CH2Br< C6H5CH (CH3)Br< C6H5CH (C6H5 )Br< C6H5C (CH3 )(C6H5 )Br
Order for SN1 mechanism
C6H5CH2Br> C6H5CH (CH3)Br> C6H5CH (C6H5 )Br> C6H5C (CH3 )(C6H5 )Br
Order for SN2 mechanism
5. Although Chlorine is an electron with drawing group yet it is orho para directing in
electrophilic aromatic substitution reactions. Why?
Ans: Cl is electron with drawing by inductive effect, and it electron relesing by resonance
and creates negative charge at ortho and para positions. And here resonance effect
is more as compare with inductive effect.
6. Which alkyl halide from the following pairs would you expect to react more rapidly
by an SN2 mechanism? Explain your answer?
1. CH3-CH2-CH2-CH2-Br & CH3-CH2-CHBr CH3
2. CH3-CH2-CHBr CH3 & C(CH3)3Br
3. CH3- CHCH3- CH2- CH2- Br & CH3- CH2- CHCH3- CH2- Br
Ans: 1. CH3-CH2-CH2-CH2-Br primary alkyl halide is more reactive than secondary
alkyl halide
2. CH3-CH2-CHBr CH3 Secondary alkyl halide is more reactive than Tertiary
alkyl halide
3. CH3- CHCH3- CH2- CH2- Br As methyl group is far from Br it will less stabilize
the carbo cations and facilitate the SN2 mechanism.
7. Which of the following compound go faster SN1 reaction:

1. &
Cl

2. & Cl
Ans: 1. first compound ismore stable because tertiary is more reactive than secondary
alkyl halide for SN1 mechanism.
2. . first compound is more stable because Secondary is more reactive than
primary for SN1 mechanism.
8. Which one of the following has highest boiling point;
CH2Cl2 CHCl3 CCl4
Ans: net Dipole moment of CH2Cl2 & CCl4 is zero due to cancellation dipole moment of
bonds due to its symmetric structure. Where as net dipole moment of CHCl3 is not
zero. Because its structure is not symmetric.
9. Which compound in each of the following pairs react faster in SN2 reaction with OH?
(i) CH3Br or CH3I (ii) (CH3)3CCl or CH3Cl
Ans: CH3I is faster reactive by SN2 mechanism because C-I bond strength is less than
C-Br bond
CH3Cl is faster reactive than (CH3)3CCl by SN2 mechanism because 10 alkyl halide
more reactive by SN2 mechanism.
10. Halo alkanes react with KCN to form alkyl cyanides as main product while AgCN
forms isocyanides as the chief product. Explain.
Ans: KCN is predominantly ionic and provides cyanide ions in solution. Although both
carbon and nitrogen atoms are in a position to donate electron pairs. The attack
takes place mainly through carbon atom not through nitrogen atom since CC is
more stable than CN bond. However, AgCN is mainly covalent innatrue and
nitrogen is free to donate electron pair forming isocyanide as the main product.
11. Why does NO2 group show its effect only at ortho and para positions and not at meta
positions?
Ans: The presence of NO2 group at ortho and para positions with draws the electron
density form the benzene ring and thus facilitates the attact of the nucleophile on
halo arene. The carbanaion thus formed is stabilized through resonance. The
negative charge appeared at ortho and para positions with respect to the halogen
substituent is stabilized by NO2 group while in case of meta nitro benzene, none of
the resonating structures bear the negative charge on carbon atom bearing the NO2
group. There fore the presence of nitro group at meta position does not stabilize the
 negative charge and no effect on reactivity isobserved by the presence of NO2 group
at meta position.
12. The dipole moment of chloro benzene is lower than that of cyclohexyl chloride.
Why?
Ans: It is due to electron with drawing effect of phenyl group which decrease dipole
moment of chloro benzene.
13. Alkyl halides, though polar, are immiscible with water. Explain.
Ans: Due to absence of hydrogen bond in alkyl halides with water.
14. Grignard reagent should be prepared under anhydrous conditios. Give reason.
Ans: Grignard reagent highly react with water to alkanes.
RMgX + H2O RH + MgXOH
15. Vinyl chloride is less reactive towards nucleophilic substitution. Explain.
Ans: Due to resonance between CCl bond in vinyl chloride show partial double bond
character.
CH2=CH::Cl:
16. Chloroform stored in dark colored bottles by completely filling it it. Explain.
Ans: Chloroform react with air in presence of sun light it forms poisonous phosogene.
2 CHCl3 + O2 2 COCl2+ 2 HCl
17. Out of C6H5CH2Cl & C6 H5CHCl C6H5 Which is more easily hydrolyzed by KOH?
Ans; The second comound is more resonance stabilized hence easily forms carbo cation
and react faster by SN1 mechanism.
18. The treatment of alkyl halides with aqueous KOH leads to the formation of alcohols
but in the presence of alcoholic KOH alkenes are major products. Explain
Ans: Substitution of alkyl halide gives alcohols and elimination gives alkenes and there is
a competition between substitution and elimination. In the presence of low polarity
solvent like alcohol favours elimination where as in the presence of high polarity
solvent like water substitution favored.
19. Bond angle of ethers is slightly greater than tetrahydral bond angle. Explain.
Ans: due to repulsion of bulky alkyl groups in ethers bond angles is slightly greater than
tetrahydral bond angle.

20. Arrange the following sets of compounds in order of their increasing

boiling points:
(a) Pentan-1-ol, butan-1-ol, butan-2-ol, ethanol, propan-1-ol, methanol.
(b) Pentan-1-ol, n-butane, pentanal, ethoxyethane.
Ans: (a) Methanol, ethanol, propan-1-ol, butan-2-ol, butan-1-ol, pentan-1-ol.
(b) n-Butane, ethoxyethane, pentanal and pentan-1-ol.
21. Acidity of alcohols is as fallows explain? 10>20>30
Ans: An electron-releasing group CH3, C2H5) increases electron density on oxygen
tending to decrease the polarity of O-H bond. This decreases the acid
strength. For this reason, the acid strength of alcohols decreases in the following
order:
22. Arrange the following compounds in increasing order of their acid strength:
Propan-1-ol, 2,4,6-trinitrophenol, 3-nitrophenol, 3,5-dinitrophenol,
phenol, 4-methylphenol.
Ans: Propan-1-ol, 4-methylphenol, phenol, 3-nitrophenol, 3,5-dinitrophenol,
 2,4, 6-trinitrophenol.
23. The reaction of alcohols with carboxylic acid or anhydrides to form esters conc.
H2SO4 is added, and the reaction with alcohol and acid chloride base like pyridine
is used. Explain.
Ans: R-OH + RCOOH/RCOOCOR RCOOR + H2O
R-OH + RCOCl RCOOR + HCl
Sulphuric acid removes the water and prevent back ward reaction,
Base like pyridine removes the acid HCl and prevent back ward reaction.
24. The relative dehydration of alcohols is Tertiary>Secondar>Primary give reason.
Ans: Dehydration carryout by carbocation mechanism, and stability of carbocation is
teriary>Secondary>Primary
25. What is intermediate in Riemer Tiemann reaction.

Ans:
26. Alcohols are comparatively more soluble in water than hydrocarbons of
comparable molecular masses. Explain this fact.
Ans: Due to hydrogen bond
27. Explain the fact that in aryl alkyl ethers (i) the alkoxy group activates the
benzene ring towards electrophilic substitution and (ii) it directs the
incoming substituents to ortho and para positions in benzene ring.
Ans: Methoxy group on Benzene ring donates the electrons and activate the ring and
creates ve charge on the ortho and para positions hence electrophile is attracted at these
positions.
28. Arrange the following compounds in the increasing order of their
boiling points:
CH3CH2CH2CHO, CH3CH2CH2CH2OH, H5C2-O-C2H5,
CH3CH2CH2CH2CH3
Ans: CH3CH2CH2CH2CH3 < H5C2-O-C2H5 < CH3CH2CH2CHO <
CH3CH2CH2CH2OH
Alcohols with hydrogen bond has more bp, Ethers have less dipole dipole
moment as compare with aldehydes and alkanes least with weak vander waals
forces.
29. Aldehydes and ketones are soluble in water.
Ans: They soluble in water due to formation of H bond between carbonyl
compounds and water.
30. Toluene with CrO3 and Acetic anhydride forms benzaldehyde. Explain.
Ans: Touene forms Benzelydine diacetate intermediate with CrO3 and Acetic
anhydride.
31. Would you expect benzaldehyde to be more reactive or less reactive in
nucleophilic addition reactions than propanal? Explain your answer.
Ans: The carbon atom of the carbonyl group of benzaldehyde is less
 electrophilic than carbon atom of the carbonyl group present in
propanal. The polarity of the carbonyl group is reduced in benzaldehyde
due to resonance as shown below and hence it is less reactive than propanal.
32. Carbonyl carbon of carboxylic acid is less electronegative than aldehydes
and ketones give reason.
Ans: The carboxylic carbon is less electrophilic than carbonyl carbon because of
the possible resonance structure shown below:

33. Carboxylic acids are having higher boiling points than aldehydes, ketones and
even alcohols of comparable molecular masses. Explain.
Ans: Carboxylic acids are higher boiling liquids than aldehydes, ketones and even
alcohols of comparable molecular masses. This is due to more extensive
association of carboxylic acid molecules through intermolecular hydrogen bonding.
The hydrogen bonds are not broken completely even in the vapour phase. In fact,
most carboxylic acids exist as dimer in the vapour phase or in the aprotic solvents.
34. Carboxylic acids are stronger acids than pheonol thought both possess
resonance stabilization of respective anions.
Ans: The higher acidity of carboxylic acids as compared to phenols can be
understood similarly. The conjugate base of carboxylic acid, a carboxylate ion, is
stabilised by two equivalent resonance structures in which the negative charge is at
the more electronegative oxygen atom. The conjugate base of phenol, a phenoxide
ion, has non-equivalent resonance structures in which the negative charge
is at the less electronegative carbon atom. Therefore, resonance in
phenoxide ion is not as important as it is in carboxylate ion. Further, the
negative charge is delocalised over two electronegative oxygen atoms in
carboxylate ion whereas it is less effectively delocalised over one oxygen
atom and less electronegative carbon atoms in phenoxide ion . Thus, the carboxylate
ion is more stabilised than phenoxide ion, so carboxylic acids are more acidic than
phenols.
35.

Ans: CH2FCO2H because ve inductive effect by F

CH2FCO2H ve inductive effect of F is more than Cl
CH3CHFCH2CO2H If ve inductive group near to COOH more acidic.
 -ve inductive effect of three F atoms
36. Give plausible explanation for each of the following:
(i) Cyclohexanone forms cyanohydrin in good yield but 2,2,6-
Trimethylcyclohexanone does not.
(ii) There are two NH2 groups in semicarbazide. However, only one is involved
in the formation of semicarbazones.
(iii) During the preparation of esters from a carboxylic acid and an alcohol in
the presence of an acid catalyst, the water or the ester should be removed
as soon as it is formed.
Ans: Due to steric effect and electron releasing effect.
The other two NH2 groups involve resonance with C=O
To prevent back ward reaction
37. Aryl amines cannot be prepared by Gabriel Phthalamide synthesis. Explain.
Ans: Aromatic primary amines cannot be prepared by this method because aryl
halides do not undergo nucleophilic substitution with the anion formed by
phthalimide.
38. Boiling point of Primary, secondary and tertiary amines is different give
reason.
Ans: This intermolecular association is more in primary amines than in secondary
amines as there are two hydrogen atoms available for hydrogen bond formation in
it. Tertiary amines do not have intermolecular association due to the absence of
hydrogen atom available for hydrogen bond formation. Therefore, the order of
boiling points of isomeric amines is as follows:
Primary > Secondary > Tertiary
39. The basic strength of amines in aqueous solutions is different from gaseous
phase give reason.

It is due to inductive effect, hydrogen bond and hydration effect

40.

41. Generally aniline direct bromination gives tri substituted product to get mono
stustitued product what is to be done.
Ans: This can be done by protecting the -NH2 group by acetylation with acetic
anhydride, then carrying out the desired substitution followed
by hydrolysis of the substituted amide to the substituted amine.
42. Account for the following:
(i) pKb of aniline is more than that of methylamine.
(ii) Ethylamine is soluble in water whereas aniline is not.
(iii) Methylamine in water reacts with ferric chloride to precipitate hydrated
ferric oxide.
(iv) Although amino group is o and p directing in aromatic electrophilic
substitution reactions, aniline on nitration gives a substantial amount of
m-nitroaniline.
(v) Aniline does not undergo Friedel-Crafts reaction.
(vi) Diazonium salts of aromatic amines are more stable than those of aliphatic
amines.
(vii) Gabriel phthalimide synthesis is preferred for synthesising primary
amines.
Ans: More Pkb less basic, less basisity of aniline is due to involvement of lone pair in
resonance.
In Aneline aromatic nature makes insoluble in water.
CH3NH2 + H2O CH3NH3+ OH-
These hydroxide ions can make Ferric hydroxie.
in the strongly acidic medium, aniline is protonated to form the
anilinium ion which is meta directing.
Aryl amines can not under go nucleophilic substitution.
43. Give plausible explanation for each of the following:
(i) Why are amines less acidic than alcohols of comparable molecular masses?
(ii) Why do primary amines have higher boiling point than tertiary amines?
(iii) Why are aliphatic amines stronger bases than aromatic amines?
Ans: Nitrogen is less Electronegetive than Oxygen which makes less polarization of
NH bond as compare with OH bond.
There is no H bond in Tertiary amines.
In aromatic amines lone pair involve in resonance.

REASONING QUESTIONS IN ORGANIC CHEMISTRY

OTHER QUESTIONS
44. Preparation of ethers by dehydration of alcohols is not suitable for the using
of secondary and tertiary alcohols give reason.
Ans: dehydration of secondary and tertiary alcohols to give corresponding ethers is
successful as elimination competes over substitution and as a consequence,
alkenes are easily formed.
45. The following is not an appropriate reaction for the preparation of
t-butyl ethyl ether.
(i) What would be the major product of this reaction ?
(ii) Write a suitable reaction for the preparation of t-butylethyl ether.
C2H5ONa + (CH3)3-Cl C2H5-O-C(CH3)3
Ans: (i) The major product of the given reaction is 2-methylprop-1-ene.
It is because sodium ethoxide is a strong nucleophile as well as
a strong base. Thus elimination reaction predominates over
substitution.
(CH3)3-ONa + C2H5Cl C2H5-O-C(CH3)3

46. Which of the following is appropriate for the preparation of anisole?

a) Bromo Benzene & Sodium Methoxide b) Phenoxide & CH3Br
Ans: Set b is appropriate because nucleaophilic substitution on aromating ring is
difficult due to partial double bond character.
47. The bond angle in alcohol is slightly less than the tetrahedral bond angle
(109 -28 ). Why Is it so?
Ans: It is due to the repulsion between the unpaired electron pairs of oxygen.
48. Carbon oxygen bond length in phenol is less than the alcohol?
Ands: It is due to the partial double bond character between C and O in phenol.
49. Boiling point of the alcohol is more than the alkenes. Comment?
Ans: due to intermolecular hydrogen in alcohols it has high boiling point.
50. Branched alcohols are having low boiling point compare with normal straight
chain alcohols? Explain. OR
Boiling point t-Butyl alcohol is less than the n-Butyl alcohol? Explain.
Ans: As branching increases surface area decreases and Vander walls force
decreases, hence boiling point decreases. And also in branched alcohols due
to electron releasing effect strength of hydrogen decreases.
51. Arrange the following compounds in increasing order of their boiling points?
CH3 -CH2-OH, CH3-CHO, CH3 -O-CH3, CH3 -CH2-CH3,
Ans: molecular of these compounds are similar; ethanol is having inter
molecular H- bond hence more boiling point. Among acetaldehyde and
ether, acetaldehyde Has strong di pole attractions than the ethers.
Propene is weak vanderwaal's forces. Hence the boiling point order is
CH3 -CH2- OH> CH3 -CHO > CH3 -O-CH3 > CH3 -CH2 -CH3
52. Arrange the following in increasing order of their relativity towards
nucleophilic
addition reactions.
H- CHO, CH3 -CHO, CH3 -CO- CH3
Ans: CH3 -CO-CH3 <CH3-CHO< H-CHO
Electron releasing effect
Steric effect
53. Ethers have low boiling point compare with corresponding alcohols.
 Give reasons
Ans: Alcohols can form intermolecular H-bond, where as ethers do not. Hence
alcohols are having high boiling point than ethers.
54. Alcohols are Bronsted bases or Proton acceptors. Explain?
Ans. It is due to presence of unshared electron pair over oxygen atom which
Makes alcohols proton acceptors. Proton acceptors are known as
Bronsted bases.
55. Alcohols are weak acids than water. Explain?
Ans. In both the cases due to polar O-H bond, behave as acids. But in alcohols
due to presence of alkyl groups, which are electron releasing hence O-H
bond is less polarized, shows weak acidic character.
56. Arrange the acidity order for 1, 2 & 3 Isomeric alcohols (C4H10O)?
Ans. Always electron releasing effect destabilizes the anion and decrease the
acidity.
57. Phenol is stronger acid than alcohol. Explain.
(Or)
Phenol is weak proton acceptor than alcohol. Explain.
Ans. Acidity of the substance depends on stability of anion after loosing H+
ion. Since phenoxide ion undergoes resonance stabilization compare to
alkoxide, phenol is more acidic than alcohol.
58. Arrange the following compounds in increasing order of their acidic
strength.
Propan-1-ol, 4-Methyl phenol, Phenol, 3,5 dinitrophenol, 2,4,6
Trinitrophenol.
Ans. Propan-1-ol< 4-Methoxy phenol< Phenol< 3,5 dinitrophenol<
2, 4, 6 Trinitrophenol

Phenol is more than alcohol due to resonance stability of phenoxide ion.

Electron releasing groups like (O-CH3) methoxy decreases acidity.
Electron withdrawing groups like (-NO2) nitro groups increases acidity.
More number of electron withdrawing groups more acidity.

59. O- nitro phenol & p-nitro phenol can be separated by distillation? Explain.
Or
Boiling point of p-nitro phenol is more than the o- nitro phenol. Explain?
Ans. O-nitro phenol is a stream volatile due to intermolecular Hydrogen bond
where as p-nitro phenol is having inter molecular Hydrogen bond.
Inter molecular hydrogen bond decreases Boiling point
Inter molecular hydrogen bond increases Boiling point
60. The usual halogenations of Benzene takes place of in presence of Lewis acid
catalyst like AlCl3, where as phenol can directly react with Bromine? Explain?
Ans. Incase of Halogenations of benzene Br2 is polarized by FeBr3, but in case of
phenol the polarization of Br2 takes place by phenol due to highly ctivating
effect of OH group present on the benzene ring.
61. Primary alkyl halide reacts with sodium alkoxide and forms ethers in good yield
 but t-alkyl halides yield fewer amounts of ethers. Explain?
Ans. Since tertiary carbocation is more stable and it will form alkenes instead of
ether.20.Explain the fact that in aryl alkyl ethers (i) alkoxy group activates
the benzene ring towards electrophilic substitution and (ii) it directs the
incoming substituents to ortho & para position ?
Ans. Alkoxy group is electron releasing to the benzene ring (+ve mesomeric
effect) and by resonance -ve charge obtained at ortho & para positions
only. Hence
electrophile attracts at ortho & para positions. And due to +ve mesomesric
effect ring became activated.
62. t- Butyl methyl ether reacts with HI forms methanol & t- butyl iodide explain?
Ans. Since tertiary carbocation is more stable and reaction is following
carbocation
mechanism it gives t- Butyl iodide.
63. The commercial ethanol is mixed with copper sulphate & pyridine. Explain.
Ans. Commercial ethanol is mixed with CuSo4 & pyridine to make it unfit for
drinking. It is known as denaturation of alcohol.
64. Explain why are alcohols comparatively more soluble in water than the
corresponding hydrocarbons?
Ans. It is due to Hydrogen Bond formation with water.
65. Explain how does the -OH group to a carbon of benzene ring activates it
towards electrophilic substitution?
Ans. OH group donates its non bonded electrons to resonance with benzene and
creates negative charge at o-p positions hence ring is activated towards electrophilic
substitution.

66. Explain the fact that in aryl alkyl ethers (i) alkoxy group activates the benzene
ring towards electrophilic substitution and (ii) it directs the incoming substituents
to ortho & para position ?
Ans. Alkoxy group is electron releasing to the benzene ring (+ve mesomeric
effect) and by resonance -ve charge obtained at ortho & para positions
only. Hence electrophile attracts at ortho & para positions. And due to
+ve mesomesric effect ring became activated.
67. Unlike phenols, alcohols are easily protanated. Give reason.
Ans. Alcohols act as proton acceptors or Bronsted bases. It is due to presence of
unshared electron pair over oxygen. In case of phenol lone pair is involving
in resonance. Hence, it can not be protanated easily.
68. Reaction of alcohols with hydrogen halides (HX) is of the following order.
Explain.
30 alcohols 20 alcohols 10 alcohols
Ans. This reaction takes place through carbocation mechanism since the stability
of carbocation is 3 2 1. The reactivity order is also same.
69. Anisole react with HI gives phenol & methyl iodide but not iodo benzene and
methanol. Explain.
Ans. Nucleophilic substitution on aromatic ring is difficult due to partial double
Bond character between oxygen and carbon of benzene ring.
70. Name the intermediate or electrophile formed during Reimur-Tiemann
reaction?
Ans.Dichloro carbon - :CCl2
71. Phenol react with bromine in the presence of carbon disulphide gives
monobromophenol whereas with water gives tribromophenol. Explain.
Ans. CS2 is a non-polar solvent whereas water is a polar solvent. In the presence
of polar solvent phenol polarizes and gives mole electrophilic substitution.
72. Ethers made of similar kind of polar bonds (symmetric) also posses some net
dipole moment. Explain.
Ans. Due to its bent structure.
73. While separating a mixture of ortho & para nitro phenols by steam
distillation, name the isomer which is Steam volatile. Give reasons?
Ans:O-nitro phenol is steam volatile due to inter molecular hydrogen bond.
74. Explain why O-nitro phenol is more acidic than O-methoxy phenol?
Ans:Nitro group is an electron with drawing which increases acidity where as
methoxy group is an electron releasing which decreases acidity.
75. Phenol is more active towards electrophilic substitution than benzene. Explain?
Ans:OH group present on the phenol is electron releasing and activates the
Benzene ring through resonance.
76. Preparation of ethers by acid dehydration of secondary or tertiary alcohols
is not a suitable method. Give reasons?
Ans:Secondary and tertiary alcohols will give alkanes easily by dehydration.
77. Explain why is propanal higher boiling than butane?
Ans:Due to intermolecular hydrogen bond present in alcohols,they possess high
Boiling point.
78. Explain why are alcohols comparatively more soluble in water than the
corresponding
hydrocarbons?
Ans:Due to presence of intermolecular hydrogen bond in alcohols.
79. Aldehydes and ketones possess more dipole moment than ethers. Explain?
Ans:Due to presence of double bond more polarity which increases dipole
moment.
34. Arrange the following compounds in increasing order of their boiling points?
CH3-CHO , CH3-CH2-OH , CH3-O-CH3 , CH3-CH2-CH
Ans:Their molecular masses are almost all similar but
CH3-CH2-OH > CH3-CHO > CH3-O-CH3 > CH3-CH2-CH3
Inter molecular more polar than presence of no H-bond &
H-bond ethers polarization
80. Why it is necessary to use sulphuric acid in nitration of benzene?
Ans: sulphuric acid is helping in formation of NO2 electrophile which is easy
To substitute on benzene.
81. Acetic acid is halogenated in the presence of red P and Cl 2 but formic acid
cannot be halogenated in the same way . Explain?
Ans. There is no alpha hydrogen in formic acid.
82. Carboxylic acid are having more boiling point than alcohols of same molecular
 mass. explain
Ans. In carboxylic acids strength of H bond is stronger than alcohols and forms
dimmer in carboxylic acids which increases boiling point.
83. Carboxylic acid can not give characteristic reactions of aldehydes and ketones
though both are having carbonyl group CO?
Ans. Carbonyl group in carboxylic acid is resonance stabilized as carboxyl ate
ion . Hence it can not give nucleophilic addition reactions given by
carbonyl group.
84. Formaldehyde gives cannizarros reaction but acetaldehyde cannot . Explain
Ans. Cannizarros reaction is given by any aldehydes without alpha hydrogen
hence acetaldehyde cannot give this reaction.
85. Why do aldehydes and ketones have high dipole moment?
Ans. Due to presence of Polaris able C=O bond in it.
86. Phenol is acidic but do not react with sodium bicarbonate solution. Explain?
Ans. Phenol is a weak acid hence it can not react with weak base like sodium
bicarbonate.

87. Boiling point of glycol is higher than alcohol of same molecular mass . Explain?
Ans. As the number of OH groups increases strength of H bond increases and
boiling point also increases.
88. Nitration of phenol is easier than benzene .explain?
Ans. Due to presence of OH group which causes electron releasing effect ,ring is
activated and electrophilic substitution is easier.
89. Why methyl amine has lower boiling point than methanol?
Ans. Amines posses weak hydrogen bond than alcohols , hence methanol has
Higher boiling point.
90. Why is it difficult to prepare pure amines by ammonal sis of alkyl halides?
Ans. Reaction of alkyl halides with ammonia gives mixture of amines because
Secondary and tertiary amines also behave as nucleophilic and undergoes
substitution with alkyl halides .
91. Electrophilic substitution in case of aromatic amines takes place more readily
than benzene .explain?
Ans. NH2 group present on the benzene is electron releasing and activates ring
Hence electrophilic substitution is easy.
92. Why does silver chloride dissolve in methyl amine solution?
Ans. Methyl amine forms a complex compound with silver chloride and that is
soluble in water
2CH3NH2 + AgCl [ Ag (CH3NH2)2] Cl
93. Tetiary amines do not undergo acieration .explain?
Ans. As these are not having hydrogen on nitrogen they can not give
contestation reaction with acid chlorides.
94. Why is diazotization of aniline carried in ice cold solution?
Ans. Diazonium salts are stable at cold conditions only.
95. Why does amides less basic than amines?
Ans. Lone pair present in amides is involved in resonance hence it is less basic than
amines.
96. Why is ethyl amine more basic than amines?
Ans. In ethyl amine lone pair is not involved in resonance where as in aniline lone
pair is involved in resonance. Hence ethyl amine more basic than amines
97. Acid catalyzed dehydration of t- butanol is faster than n-butanol why?
Ans. Dehydration is taking place through carbon cation mechanism as tertiary
carbo cation is more stable .hence t- butanol is faster than n-butanol
98. Sodium bisulphate is used for preparation of aldehydes and ketones?
Ans. Mixture of aldehydes and ketones react with NaHSO3 aldehydes preferably
react to form salts as compare with ketones, hence they are separated.
99. Hydrazones of acetaldehyde are not prepared in highly acidic medium?
Ans. Hydrazones are prepared from hydrazenes and it is basic in nature. In highly
acidic medium it forms salt.
100. Why are amides amphoteric in nature>
Ans. Lone pair present in N of amides in involving in resonance and less
available for donating hence behave as weak bases. And during resonance it
forms +ve charge on nitrogen which has tendency to loose proton and behave as
acidic . So amides are amphoteric in nature.
101. Highly branched carboxylic acids are less than unbranched acids .Why?
Ans.As branching increases,electron releasing effect increases,which decreases
acidity.
102. Aneline dissolves in aq.HCl,why?
Ans.Aneline is basic in nature.hence,it is soluble in acids like HCl.
103. A weakly basic solution favours coupling of benzene diazonium chloride with
phenol.Explain?

104. Why are aryl diazonium ion more stable than diazonium ion?
Ans. Aryl diazonium ion is stabilized by resonance but in alkyl diazonium ion ,no
resonance for stabilization.
105. Methyl amine in water reacts with ferric chloride to precipitate ferric
hydroxide.Why?
Ans.Methyl amine is a proton acceptor from water and forms hydroxyl ion which
reacts with ferric ions forms ferric hydroxide.
CH3-NH2 + H2O CH3-NH3+ + OH-
-
FeCl3 + 3OH Fe(OH)3 + 3Cl-
106. Ethers possess a dipole moment even if the alkyl radicals in the molecule are
identical.Explain?
Ans.Due to Sp3 hybridisation ,ethers posses bent structure hence net dipole moment
is not zero and will not cancel.
107. Why di-tertiary butyl ethers cannot be prepared by Williamsons synthesis?
Ans. As tertiary carbocation is more stable,it has less tendency to undergo
Nucleophilic substitution.Hence it cannot be prepared.
108. Treatment of C6H5-CHO with HCN gives a mixture of two isomers which
cannot
be separated even by very careful fractional distillation?
 Ans.This reaction gives racemic mixture of two optical isomers whichg are
having almost all same boiling point and similar chemical properties .Hence they
cannot be separated by fractional distillation.
109. Electrophilic substitution on nitro benzene is difficult compare with
benzene.explain?
Ans.Nitro group present on the benzene is electron withdrawing and deactivates the
ring for substitution.Hence it is difficult.
110. The presence of electron withdrawing groups on benzene facilitates
nucleophilic substitution.Explain?
Ans.Due to electron withdrawing effect it will stabilize the carbanion intermediet.

Trinitrochlorobenzene+KOH Trinitrophenol

111. Tertiary amines are having low boiling point compare with primary and
secondary amines.Explain?
Ans.Due to absence of Hydrogen bond in tertiary amines,they possess low boiling
point as compare with primary and secondary.

112. In solutions,basic strength of amines is secondary>tertiary>primary.Explain?

Ans.Basic strength of amines depends on ammonium cation in solutions
.Ammonium stability not only depends on electron releasing effect but also H-
bonding,stearic factor. Hence the above order of basic strength is correct .

113. In gas phase,basic strength of amines is tertiary>secondary>primary.Explain?

Ans.In gas phase,there is no salvation effect.It only depends on electron releasing
effect.Hence the above order is correct for basic strength in gas phase.

114. Acylation on amines and phenols takes place directly, whereas acylation on
benzene requires AlCl3 catalyst.Give reasons?
Ans.Reaction of amines and phenol with acid chlorides is nucleophilic
substitution,which takes place directly due to presence of lone pair on both oxygen
and Nitrogen.Whereas acid chloride on reaction with benzene is electrophilic
substitution which requires a catalyst like AlCl3 catalyst to form an electrophile.

115. Acid chlorides give pungent smell in air.Explain?

Ans. Acid chlorides undergo hydrolysis with atmospheric moisture and gives HCl
fumes,which are pungent.

116. Nitration of benzene gives substantial amount of meta product,though NH2 is

o-pdirecting group?
Ans.Nitration takes place in the presence of H+ ions which protanates on Amine
and forms which behaves as electron withdrawing group,hence it forms some
amount of meta product.

117. Before nitration,Aneline is acylated.Explain?

Ans.To protect -NH2 group from oxidation and to prevent meta product.
118. Reactivity order of carboxylic acid derivatives are
Acid chlorides>Anhydrides>Esters>Amides.Explain the reason?
Ans.I) Basisity of leaving group
II) Resonance effect
74.Explain cyanides are soluble in water whereas isocyanides are insoluble.
Ans.Cyanides can form hydrogen bond with water whereas Isocyanides
cannot.

119. Preparation of Alkyl halides from alcohols by using SOCl2 is

preferable.Explain?
Ans.When SOCl2 is used,side products are gases and forms pure alkyl halides.
R-OH+SOCl2 R-Cl + SO2+ HCl

120. lkyl halides react with nitrites whereas AgNO2 gives Nitro alkanes.Explain?
Ans. KNO2 is an ionic compound and forms NO2- which is an ambidentate
nucleophile.It can form bond with nitrogen and oxygen.Since C-O bond is
stable,it forms alkyl nitrites whereas AgNO2 is covalent compound.Here oxygen
is not free.only bonding takes through nitrogen and forms nitroalkanes.

121. During prepation of esters by reaction of carboxylic acids and alcohols,the ester
formed is distilled out as soon as it is formed.Explain?
Ans.Formation of ester is a reversible reaction.To prevent backward
reaction,it is distilled out immediately.

122. lectrophilic substitution on Benzoic acid takes place at meta position?

Ans.Since COOH group is electron withdrawing group,it acts as meta
directing group in resonance,it creates positive charge on ortho and para
position.And electrophile is positive and feel repulsion at ortho and para
position.Hence it goes to the meta position.

SOME REASONING QUESTIONS asked in CBSE Board

2006- DELHI
1. Electrophilic substitution in case of amines takes place more readily than benzene.
2. CH3CONH2 is a weaker base than CH3CH2NH2.
3. Nitro compounds have higher boiling points than hydrocarbons having almost same
molecular mass.
2006- AISSCE
1. -nitrophenol is more acidic than -methoxyphenol.
2. Glycerol is used in cosmetics.
3. Explain the observed Kb order: Et2NH> Et3N>EtNH2, in aquous solution.
2006- FOREIGN
1. Aldehydes are more reactive than ketones towards nucleophilic reaction.
2. Electrophilic substitution in benzoic acid takes place at meta position.
2005-DELHI
1. Why are primary amines higher boiling than tertiary amines/
2. Alkylamines are stronger base than arylamine.
3. Acetanilide is preferred as good solvent in organic chemistry.
4. Carboxylic acid do not gives characteristic reactions of carbonul group.
5. Treatment of benzaldehyde with HCN gives a mixture of two isomers which can be
separated even by fractional distillation.
6. NaHSO3 is used for purification of aldehydes and ketone.
AISSCE
1. How is the basic strength of aromatic amine affected by the presence of an
electron releasing group on the benzene ring?
2. How an OH group attached to a carbon in the benzene ring activates benzene
towards electrophilic substitution?
3. Nitrobenzene does not undergo Friedelcraft,s reaction.
4. Methylamine in water reacts with FeCl3 to precipitate Fe(OH)3.
5. Methylamine is stronger base than ammonia.
FOREIGN
1. Why are primary amine higher boiling than tertiary amine?
2. Aldehydes are more reactive than ketones towards.
3. Carboxylic acids have much higher acidity than phenol.
4. In aquous solution, secondary amines are more basic than tertiary amines.
5. Amines are more basic than comparable alcohol.
2004- DELHI
1. Aromatic amines are less basic than ammonia and aliphatic amines.
2. Draw the structure of a carbonyl group and indicate clearly a) hybridized state of
carbon, b) -and - bond present c) electrophilic and nucleophilic centres in it.
3. Aldehydes are more reactive than ketone towards nucleophilic reaction.
4. Chloroacetic acid is stronger than acetic acid.
AISSCE
1. Even in mild condition, aniline on bromination gives 2,4,6-tribromoaniline.
2. Diazonium ion acts as electrophile.
3. Nucleophilic substitution of p-nitrochlorobenzene is easier than that of
chlorobenzene.
4. Amines are more basic than comparable alcohol.
5. It is difficult to prepare pure amines by ammonolysis of R-X.
6. Electrophilic substitution in case of aromatic amines takes place more readily
than in benzene.
7. In contrast to arenas, aliphatic hydrocarbons do not undergo nitration.
8. Ethers possess a net dipole moment even if the alkyl radicals in the molecule
is identical.
9. Sodium bisulphate is used for purification of aldehydes and ketones.
10. Most aromatic acids are solid but the aliphatic acids are liquid.
11. Aniline is a weaker base than cyclohexyl amine.
12. Benzoic acid is stronger than acetic acid.