________________________________________________________________

Kalmatron KF-B SAFETY DATA SHEET Date of revision: 07/07/2017

SECTION 1: IDENTIFICATION

Product name: KALMATRON KF-B

Synonyms: KALMATRON , USA PATENT #2,724,832; Waterproofing Coating.
Intended Use of the Product
Protective remedial and waterproof coating for concrete and masonry structures in damp
conditions. KF-B restores liquid and vapor impermeability, increases corrosion and freeze thaw
resistance, and prevents rebar rusting. For professional use only.
Manufacturer
KALMATRON Corporation
276 Michelle Court
South San Francisco, CA 94080
Website address: www.kalmatron.com
Telephone: +1 (415) 385-3290 (non-emergency matters; regular business hours).
Emergency (24 hours): CHEMTREC: 1 (800) 424-9300

SECTION 2: HAZARDS IDENTIFICATION

EMERGENCY OVERVIEW: Under normal use conditions, this product is not expected to cause
adverse health effects.
GHS Hazards, Label Elements and Precautionary Statements
OSHA/HCS Classification of the chemical
Warning, Skin Irrit. 2, Causes skin irritation.
Warning, Eye Irrit. 2A, Causes serious eye irritation.
Warning, STOT SE 3, May cause respiratory irritation.
CARCINOGENICITY/INHALATION Category 1A
SPECIFIC TARGET ORGAN TOXICITY (SINGLE EXPOSURE) [Respiratory tract irritation]
Category 3

Label elements
Symbols:

Warning
Hazard statements:
H315 Causes skin irritation.
H319 Causes serious eye irritation.
H335 May cause respiratory irritation.
May cause an allergic skin reaction. May cause respiratory irritation. May cause cancer.
Precautionary statements:
P261 Avoid breathing dust/fume/gas/mist/vapors/spray.

Kalmatron KF-B Waterproof Coating 1

P264 Wash hands thoroughly after handling.
P271 Use only outdoors or in a well-ventilated area.
Wear an approved particle respirator.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P302+P352 IF ON SKIN: Wash with plenty of water.
P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact
lenses, if present and easy to do. Continue rinsing. P312 Call a doctor if you feel unwell.
P332+P313 If skin irritation occurs: Get medical advice/attention. P337+P313 If eye irritation
persists: Get medical advice/attention. P362+P364 Take off contaminated clothing and wash it
before reuse. P403+P233 Store in a well-ventilated place. Keep container tightly closed.
P405 Store locked up.
P501 Dispose of contents/container in accordance with applicable regulations.
Special Provisions: None
Hazards not otherwise classified identified during the classification process: None
Ingredient(s) with unknown acute toxicity: None.

Symptoms and Precautions

Inhalation: May cause respiratory irritation. Inhalation of dust may cause shortness of breath,
sneezing and coughing. (See Section 4 for first aid)

Ingestion: Ingestion is not anticipated in an industrial environment. If large amounts are ingested,
the product may cause irritation and nausea. (See Section 4 for first aid)

Skin contact: Wear protective gloves and protective clothing, (See Section 8). Skin contact with
this product may cause mild skin irritation and redness. (See Section 4 for first aid).

Eye contact: Wear eye protection. Eye contact may cause mild irritation.

Chronic: This product is not known to pose any chronic health hazards.

Carcinogenic evaluation: Contains Portland Cement and Silica Sand (Quartz):

CARCINOGENICITY/INHALATION Category 1A

SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS

Name CAS No. Weight %

Portland Cement CAS# 65997-15-1 >50%
Silica Sand CAS# 14808-60-7 <50%
Chemical base N/A >20%

SECTION 4: FIRST AID MEASURES

General: If, after receiving first aid according to the following instructions,
any symptoms persist, immediately seek medical attention.
Inhalation: Move exposed person to fresh air. Keep person warm and at
rest.
Skin contact: Remove contaminated clothing. Wash skin thoroughly with soap
and water. If irritation persists, seek medical attention.

Kalmatron KF-B Waterproof Coating 2

 Eye contact: Check for and remove any contact lenses. Hold eye lids ajar and
immediately flush eyes with water. Continue flushing eyes with water
for at least 15 minutes.
Ingestion: If swallowed, rinse mouth with water and drink plenty of water. Seek
immediate medical advice and show container or label.

SECTION 5: FIREFIGHTING MEASURES

This product is non-flammable. Use extinguishing media suitable for the surrounding fire. Do not
allow extinguishing water to enter the sewer system.

Suitable extinguishing media: Use Water Spray. Water jet may spread fire.
Specific hazards: Do not inhale gases formed during the fire.

SECTION 6. ACCIDENTAL RELEASE MEASURES

Personal Precautions: Immediately contact emergency personnel. Avoid dust formation Avoid
breathing vapors or mist. Ensure adequate ventilation. For personal protection, see Section 8.
Large Spill: Do not allow product to enter drains, waterways and sewers. Personnel must have
appropriate training, per Occupational Safety and Health Administration (OSHA) 29 CFR
1910.120.
Methods for Containment and Clean up: Avoid creating or breathing dust. Sweep up and
shovel. Keep in a suitable, closed container for disposal. Wear personal protective equipment
(Section 8).

SECTION 7. HANDLING AND STORAGE

Handling: Avoid formation of dust. Avoid accidental contact of product with water. Keep
containers and/or packaging sealed until ready for use. Put on appropriate protective equipment
(see section 8). Comply with Health and Safety at Work laws. Work in a well ventilated area.
Avoid contact with eyes and skin. Do not ingest.
Storage: Keep containers closed when not in use. The average shelf life is 12 months. Store in
original packaging or tightly closed containers in a dry and well ventilated area. Do not store in
temperatures below 22 degrees Celsius. Keep away from food, beverages and feeds. Avoid
moisture: the maximum humidity in the storage area is 96%. See Section 10, Stability and
Reactivity.

SECTION 8. EXPOSURE CONTROLS / PERSONAL PROTECTION

PERSONAL PROTECTIVE EQUIPMENT
Respiratory protection: Wear an approved particle respirator. Particle filter device (DIN EN
143).
Skin and body protection: Handle with impervious (PVC, neoprene, nitrile) gloves. Choose
body protection, e.g. impervious apron, sleeves, coveralls, according to the amount and
concentration of dust created.
Eye protection: Wear safety glasses with non-perforated side shields or goggles
Hygiene measures: Avoid skin exposure. Do not eat, drink or smoke when working with product.
Avoid contact with eyes and skin. Wash hands thoroughly with soap and water immediately after
contact.

Other precautions: Recommend emergency eyewash and shower in the immediate area.

Wear ANSI approved safety glasses or goggles to protect eyes Wear Latex or rubber gloves to
protect skin Wash hands thoroughly before breaks and at end of work day

Kalmatron KF-B Waterproof Coating 3

SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES
Appearance: Coarse, dry powder
Substance type (pure/mixture): Mixture
Color: Cement Gray
Odor: Characteristic (slight).
Density: 1500 kg/m3
pH: 810
Specific Gravity: 2.16
Water solubility: 40% soluble during mixing with water.
Flammability: Not flammable.
Melting point: Not applicable.
VOC content: Not applicable.
Other information: Melting point, freezing point, boiling point, flash point, evaporation rate,
explosive limits, vapor pressure and density, partition co efficient, auto ignition temperature,
decomposition temperature, viscosity, explosive properties and oxidizing properties are all not
applicable.

SECTION 10. STABILITY AND REACTIVITY

Stability: Stable in recommended storage conditions. Unstable during the hardening reaction,
like cement products when mixed with water. See handling, and storage conditions (see section
7).
Possibly hazardous reactions: Not known.
Incompatible materials: Not known.
Conditions to avoid: Avoid moisture and high humidity and accidental contact of unpacked
product with water.
Hazardous decomposition products: Under normal conditions of storage and use, hazardous
decomposition products should not be produced.

SECTION 11. TOXICOLOGICAL INFORMATION

Acute toxicity: No toxicity data is available for the product as a mixture.

SECTION 12. ECOLOGICAL INFORMATION

Ecotoxicity effects: This product is not classified as being hazardous to the environment (LC50
aquatic toxicity not determined).
Persistence and degradability: The dried product may cause mechanical contamination of the
soil.
Bioaccumulative potential: This product does not bioaccumulate.
Mobility in soil: This product is expected to be completely soluble in water.

SECTION 13. DISPOSAL CONSIDERATIONS

Disposal considerations: Dispose of in accordance with state/ provincial, and local regulations.
Prevent entry in to the sewage water system. Dispose of the hardened product as concrete
waste.

SECTION 14. TRANSPORT INFORMATION

Please refer to DOT regulation 49 CFR 172.101:
Transport information: Not regulated for transport
Hazardous Materials Description: (DOT and IATA): None
UN/identification no.: None
Proper shipping name: None
Hazard class: None

Kalmatron KF-B Waterproof Coating 4

Packing group: None
DOT reportable quantity (lbs.): None

SECTION 15. REGULATORY INFORMATION

U.S. federal regulatory information: State and community right-to-know regulations:
The following component(s) of this material are identified on the regulatory lists below:
U.S. TSCA Chemical inventory Section 8(b), AICS (Australia), DSL (Canada): All
components are listed or exempt.
CERCLA Sections 102a/103 (40 FR 302.4): This product is not classified as hazardous or
reportable under this requirement.
SARA Title III Sections 311/312 Hazardous Categories (40 CFR 370.21)
Acute health hazard: No
Chronic health hazard: No
Fire hazard: No
Reactive Hazard: No
Pressure Hazard: No
Marine Pollutant: Not listed
State Regulations: Unknown
California Proposition 65 Components: Portland Cement, Silica Sand (Quartz) are classified
as carcinogens under Proposition 65.
INTERNATIONAL REGULATIONS Identification According to EEC Directives: Not available
WHMIS (Canada): Not controlled.

NOTE: User must consult with applicable state and local agencies for special specifics,
determinations or compliance obligations regarding this product.

SECTION 16. OTHER INFORMATION

KF-B Safety Data Sheet, dated 7/07/2017
Disclaimer:
This Safety Data Sheet cancels and replaces any preceding release.
The information on this Safety Datasheet reflects the currently available knowledge and is
reliable, provided that the product is used under the prescribed conditions and in accordance with
the application instructions and safety information specified on the packaging and/or in the
technical guidance literature. The information and recommendations contained herein are based
upon tests, data, and information resources believed to be reliable. However, Kalmatron
Corporation does not guarantee the accuracy or completeness, nor shall any of this information
constitute a warranty, representation, or license of any kind, whether expressed or implied, as to
the safety of goods, the merchantability of the goods or the fitness of the goods for a particular
purpose. Kalmatron Corporation assumes no responsibility for injuries proximately caused by use
of the Materials if reasonable safety procedures are not followed as stipulated in this Safety Data
Sheet. Additionally, Kalmatron Corporation assumes no responsibility for injuries proximately
caused by abnormal use of the Material even if reasonable safety procedures are followed. The
buyer assumes the risk in its use of the Material. Any other use of the product is the responsibility
of the user. It is implicit that the user is responsible for determining the appropriate safety
measures and for applying the legislation covering his/her own activities.

The information on this datasheet is accurate at the time of printing, but KALMATRON
Corporation reserve the right to amend details as part of its product development program.

Kalmatron KF-B Waterproof Coating 5