Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 174 views

    System 800xa Hardware: Data Sheet

    Uploaded by

    mojinjo
    ABB SS823

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    System 800xa Hardware: Data Sheet

    Uploaded by

    mojinjo
    174 views3 pages
    ABB SS823

    Original Title

    Product Ss823

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    ABB SS823

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    174 views3 pages

    System 800xa Hardware: Data Sheet

    Uploaded by

    mojinjo
    ABB SS823

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    Data sheet

    SS823
    System 800xA Hardware

    The Voting Units SS822Z, SS823 and SS833 have


    been specifically designed to be employed as a control
    unit within a redundant power supply configuration.
    The output connections from two Power Supply Units
    are connected to the Voting Unit.
    The Voting Unit separates the redundant Power
    Supply Units, supervises the voltage supplied, and
    generates supervision signals to be connected to the
    power consumer. Green LEDs, mounted on the front
    panel of the voting unit, provide a visual indication that
    the correct output voltage is being delivered.
    Simultaneously with the green LED illuminating, a
    voltage free contact closes the path to the
    corresponding OK connector. Voting Unit trip levels,
    are factory preset.
    The AC 800M High Integrity and the connected S880
    High Integrity I/O system (including field power) shall
    be supplied from a SELV or PELV power supply (e.g.
    SD83x) connected through the power voter SS823.
    The SS823 Voting Unit has double overvoltage
    protection circuit on both inputs. It is also able to
    detect both short and open circuit in the voting
    element.

    Features and benefits


    Simple DIN-rail mounting
    Class I Equipment, (when connected to Protective Earth, (PE))
    Over-voltage Category III for connection to primary main
    TN network
    Protective separation of secondary circuit from primary circuit
    Accepted for SELV and PELV applications
    The output of the units is protected against over current
    (current limit) and over voltage (OVP)
    The SS823 unit is also G3 compliant

    1(3) SS823 2016-12-18 | Copyright 2016 ABB


    General info

    Detailed data Voter and Over Voltage


    Article number 3BSE038226R1 Type
    Protection
    Mains voltage variation Mains/input voltage, max.
    Rated output current -20 A Rated output power 60
    - V d.c.
    allowed (a.c.= 45-65 Hz)
    Rated
    Primaryoutput voltagecurrent at
    peak inrush - Rated input power 500 W
    - Load sharing Yes
    power on voltage, nominal
    Mains/input 1x24 V d.c. Applications -
    Power Factor
    Efficiency (at rated output
    factor - Heat dissipation 24 W at 20 A and 6 W at 5 A
    power)
    Output voltage regulation at
    1.2 V lower than input Ripple (peak to peak) -
    max. current
    Secondary voltage holdup
    - Maximum output current (min) 35 A (Overload)
    time at mains blackout
    Maximum ambient Primary: Recommended
    55 C -
    temperature external fuse (1)
    Secondary: Over-Voltage
    Secondary: Short circuit - < 30 V
    protection

    Environmental and
    certification
    CE mark Yes Electrical safety IEC 61131-2, EN 50178
    Hazardous Location ATEX Zone 2 Marine certification ABS, BV, DNV-GL, LR, RS, CCS
    Corrosive atmosphere ISA-
    Protection rating IP20 according to IEC 60529 G3
    S71.04
    Mechanical operating
    Pollution degree Degree 2, IEC 60664-1 IEC 61131-2
    conditions
    EMC EN 61000-6-4 and EN 61000-6-2 Overvoltage Categories -
    Class 1 according to EN 50718;
    Equipment class
    3.56

    Dimensions
    145 mm (5.8") including
    Width 116 mm(4.6") Depth
    connector
    Height 132 mm (5.3") Weight (lbs.) 870 g (1.9 lbs.)
    Mounting spacing W mm 15 mm (0.59") Mounting spacing H mm 30 mm (1.2")

    2(3) SS823 2016-12-18 | Copyright 2016 ABB


    Contact us

    www.abb.com/800xA Note:
    www.abb.com/controlsystems We reserve the right to make technical
    changes to the products or modify the contents
    of this document without prior notice. With
    regard to purchase orders, the agreed
    particulars shall prevail. ABB does not assume
    any responsibility for any errors or incomplete
    information in this document.
    We reserve all rights to this document and the
    items and images it contains. The reproduction,
    disclosure to third parties or the use of the
    content of this document including parts
    thereof are prohibited without ABBs prior
    written permission.
    Copyright 2016 ABB All rights reserved
    800xA is a registered or pending trademark of
    ABB. All rights to other trademarks reside with
    their respective owners.

    3(3) 2016-12-18 | Copyright 2016 ABB

    You might also like