CONTROL SYSTEMS LABORATORY

DEPARTMENT OF ELECTRICAL ENGINEERING

UNIVERSITY OF ENGINEERING & TECHNOLOGY

LAHORE, PAKISTAN
 OVERVIEW OF THE LABORATORY

Control Engineering is of significant interest in most areas of industry - new and established. Control
System applications are assuming an increasingly important role in the developing world, making it
crucial for the students to be exposed to contemporary control system equipment in a realistic manner,
in order to connect theoretical material taught in lecture courses with the realities of physical hardware
and simulation through higher-level technical computing language. To achieve the goal, Control
Systems laboratory has been set up on 1st floor in Department of Electrical Engineering to provide this
realistic environment. This laboratory provides university-level students with a test bed to learn and
practice fundamental concepts of control systems. Broacher describes the structure of the laboratory,
present equipment and features, and the type of experiments students conduct along with a brief
experiments list.
STRUCTURE OF THE LABORATORY

Control Systems Laboratory presents facilities of computing and simulation through MATLAB and
demonstration on FEEDBACK designed equipment with PCI cards creating an impressive digital
control system development environment. MATLAB is a higher-level technical computing language
that provides a platform for algorithm development, data analysis, data visualization, etc. Together
with SIMULINK and additional toolboxes it facilitates control system design and analysis, which can
later be implemented in real-time applications using Real-time Workshop.
The Feedback range of Control Systems demonstration equipment has been employed to provide a
modern, efficient approach to training the undergraduate students in this field. Our philosophy is to
equip students with the fundamental ideas and principles that underpin modern engineering
practice by using versatile trainers that quickly and clearly demonstrate the required technology.
Feedback control Instruments are compatible with such an environment. Salient features of
equipment are:

Phenomenological process models

Dynamics analysis
Discrete models identification
Controller design
Controller tests on the model
Controller implementation in real-time
applications
Implementation of various control
strategies
Data visualization

The Phenomenological process models are designed in SIMULINK to provide initial models for the
user to test. Model linearization is then discussed and the use of simple dynamics analysis - like bode
diagrams poles and zeros maps are introduced. To obtain accurate models Identification procedures
incorporating MATLAB functions are described. Controllers design and PID control is explained and
a guide is given for PID controller design, testing, tuning and implementation on the model. Root
locus technique is used to illustrate the changes that PID controller tuning inflicts on the control
system performance. The designed controllers are prepared in SIMULINK to be built and tested
through the Real-time Workshop using the Feedback control applications.
Paramount to all laboratory equipment is the principle that students of Engineering and Technology
should work with hardware and be allowed to take a hands-on approach.
This hardware is used in conjunction with a combination of

Industry standard control devices

Computer Assisted Learning
techniques with Feedbacks Discovery
software - offering on-screen
instruction and embedded, real-time,
virtual instrumentation
Sophisticated simulation software such
as MATLAB to create challenging
applications

EQUIPMENT AND FACILITIES

Digital Servo Trainer

Open and closed-loop speed and velocity feedback signals
position control Linear or PWM motor drive
Demonstrates both Analogue and
Digital control techniques
Built-in PC based instrumentation
On-board square and triangle
waveform generator
Independent single, two-term, or full
PID control
Absolute position & incremental speed
& position encoders
Continuous analogue position and

DC Modular Servo System

Motor speed characteristics with speed response
DC error channel Position response
Deadband & step response Closed loop frequency response
Velocity feedback Identification of motor time
Analysis of simple position control constants
 Identification of velocity error
constant Kv
Frequency and transient response
Measurement of following error
Stability considerations & the use
of lead, lag and combined networks
Tachogenerator feedback and
its effects on system performance
Notch filter design
including acceleration feedback
Frequency selective characteristics
Linearisation of systems
for the elimination of noise and
harmonics
ac Modular Servo System MS150A
Analysis of carrier systems
Motor characteristics
Frequency transformation for
AC tachogenerator
compensator techniques
Motor speed control
Principles and measurement of
Characteristics of 2-phase motors
compensation unit characteristics
Position control systems
Instability
Importance of phasing on torque
Reduction in steady following error
Simple speed control and speed
Effects of gain and damping
performance
Synchro link and the demodulator
Compensation using the adjustable
notch filter

Digital Pendulum

Pendulum Description
Equations of motion
Nonlinear model
Linear models
Model identification
Static friction compensation
Real time PID control of cart position
 Real-time swing-up control Pendulum set-up control
Inverted pendulum control of swing- Plant control
up mode PID controller
Use of the MATLAB system PID control of cart model position
identification toolbox Inverted pendulum stabilization
Crane linear model identification Crane control
Inverted pendulum linear model Combined control techniques

Magnetic Levitation Control

Both analogue and digital control
solutions are implemented.
Convenient sockets on the enclosure
panel allow for quick changes of
analogue controller gain and
compensation components.
The equipment is self-contained in
analogue mode, with built-in power
supply.
In the digital mode the system operates
within a MATLAB environment which
allows the system parameters to be
determined and the system to be
modeled.
The digital controller can be used to
New and innovative form of Magnetic run the hardware and the actual
Levitation phenomenon. control performance can be seen and
A hollow steel sphere is suspended in analysed.
space with visually appealing results and Additional student generated control
convenient time constants. algorithms may be tested through
SIMULINK.

The Twin Rotor System

Demonstrates the principles with significant cross-coupling.

of a non-linear MIMO system
 Its behavior resembles a helicopter but
the angle of attack of the rotors is fixed
and the aerodynamic forces are
controlled by varying the speeds of the
motors.
Significant cross-coupling is observed
between the actions of the rotors, with
each rotor influencing both angle
positions.
The MATLAB software allows the
student to design and test stabilizing
controllers with independent control
applied to each co-ordinate of the More advanced investigations may be
system. carried-out through user-defined
algorithms from within SIMULINK.

Pneumatic Servo

Widely used in todays manufacturing

industries.
Position, speed and pressure control.
Motor control with speed control in
single and both direction.

Hydraulic Servo

Widely used in todays manufacturing

industries.
Position, speed and pressure control.
Motor control with speed control in
single and both direction.
EDUCATION AND COURSES
Various courses are taught both at the undergraduate and graduate levels. These courses
provide students with a broad fundamental basis in theoretical, numerical, and practical skills,
so that graduates are well prepared experts in the area.

UNDERGRADUATE COURSES

EE 363 Control Systems

GRADUATE COURSES

EE 680 Digital Control Systems

EE 684 Adaptive Control Systems
EE 580 Advanced Control Systems
EE 681 Stability of Control Systems
EE 683 Non-Linear Dynamic Systems
EE 535 Control of DC Drives
EE 536 Control of AC Drives
EE 512 Intelligent Agents
EE 661 Expert systems and artificial
intelligence
EE 583 Dynamics of Robotics
EE 584 Optimal Control Theory

TERM PROJECTS

Students are to present term projects on the completion of all lab sessions utilizing the
theoretical concepts learned in the class and practical work carried out during the semester.
These projects provide students with a broad fundamental basis in practical skills. Students are
encouraged to explore industry related problems in their work.

Some significant and recently completed projects by undergraduate students are:

 Speed Control of DC motor using Pulse Width Modulation

Control Circuit for Induction Heating

Speed and Direction Control of motor by H-Bridge

Microcontroller based control of stepper motor

Design and Simulation of Vehicle Suspension System

Design and Simulation of Cruise Control System

MATLAB GUI based control system analyzer

LABORATORY EXPERIMENTS

Laboratory Experiments performed by undergraduate students are:

Differential Equations Modeling

To get familiar with the SIMULINK working environment. Solving differential equations, time domain
approach

Mathematical Models of Systems

To declare Transfer Function, Calculate Transfer Function of mass-damper-spring system.

Impulse Response and Step Response. Concept of Damping Ratio and Natural Frequency.
Open-loop and Closed-loop Transfer Function

State Variable Models

To learn how to convert the transfer function of a system into state variable representation
and vice versa.Simulate a system expressed in state variable form. Change the System
parameters to obtain over damped, under damped, critically damped and oscillatory
 responses

Control of Transient and Steady State Response of Systems

To explore the steady-state error of a control system. Effect of Disturbance Torque on DC

motor. Sensitivity of a control system. Effect of change of gain of Proportional Controller on
step response of closed-loop model of DC motor

Stability of Control Systems

To explore the stability of a control system using pole zero map of transfer function. Routh-
Hurwitz criteria to determine stability

Root Locus Analysis of Control Systems

To explore the root-locus analysis of a control system. Range of gain for stable operation using
root locus. Effect of PI controller and integral controller on system response.

Frequency Domain Analysis of Control Systems

To explore the Frequency Response of a Control System. Find phase margins and gain margins

Digital Control Systems

To explore the Properties of Digital Control Systems. Convert continuous time system to
discrete system and vice versa. Root Locus of Digital control system on z-plane

Open-Loop Speed Control of DC Servo

Study the function of each component of DC servo system. Sketching Open-loop step response
with and without the mechanical load.

Closed-Loop Speed Control of DC Servo

Study the function of each component of DC servo system. Closed-loop step response with and
without the mechanical load
Open-Loop Position Control of DC Servo

Sketching Open-loop step response with and without the mechanical load.

Closed-Loop Position Control of DC Servo

Closed-loop step response with and without the mechanical load. Changing gain to achieve
different kind of responses

Magnetic Levitation System

Study the function of each component of Magnetic Levitation System. Observe the effect of
controller type on system response.

Inverted Pendulum System

Identification of different components of Inverted Pendulum. Effect of system response to a

step-input and sinusoidal input. Effect of system response to a change in the frequency of the
input signal.

Pneumatic Servo

Identification of different components and demonstration of operation

Hydraulic Servo

Identification of different components and demonstration of operation

An e-group is maintained for important announcements, assignments and assist students

overcoming difficulties being faced during semester. Group for recent semester is:

EE363_Control_System@yahoogroups.com
FUTURE PLANS

The laboratory has already encouraged many students to carry out interesting research projects
on dc and ac drives and fuzzy logic. Although laboratory was planned to be a resource for
undergraduate students, it was found it to be of interest and value to Graduate students as well,
although it did require greater effort to develop experiments at a more sophisticated level.

Finances and human resources permitting, our future plans call for the augmentation of this
laboratory with:

Process Control Instrumentation

A fundamental Control Engineering discipline which has got importance in many industries.
Process Control depends upon measurement, requiring a detailed understanding of the
relevance, accuracy and different techniques which may be used and applied in open and
closed loop systems. Depending on the process requirement, different levels of control will be
addressed, using different devices such as Process Controllers and PLCs.

Robotics

The handling of various industrial materials now has been undertaken using some form of
automation as a substitute for human effort. Today, the majority of mass-produced items are
made using very complex and highly sophisticated manufacturing systems. These employ many
types of versatile robotic mechanisms that can be programmed to be used for different
applications. The number of robotic systems in manufacturing now runs into millions and their
use has extended to other areas, such as medical, and domestic and where human activity
would not be possible. Keeping this in view, future plan is to ensure the availability of robotic
trainers for the laboratory. These trainers involve electrical, hydraulic and pneumatic devices
that are used to make fully working, industrially representative systems but on a much smaller
scale and at lower cost.
PUBLISHED WORK

Some selected research publication are as under:

Design and Implementation of a K. M. Hasan IEEEP Research Vol. XXXIV,

Variable Speed Induction Motor Drive Journal, January 2001.
(VSIMD) Pakistan.
Artificial Neural Networks in Electrical K M Hasan IEEEP Research Vol. 43 January,
Machine Drives Journal, 2004 to March
Pakistan. 2004.
Analysis and Simulation of Automobile K. M. Hasan, M. Saleem, M. World Scientific Nov. 2004
Pollution Control Riaz Moghal, M. Waris, Abid and Engineering
Qureshi, M. Shabbir, A. Academy and
Hameed Ratyal Society
(WSEAS)
Conference,
Italy