Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 82 views

    Readme Data Convertors PDF

    Uploaded by

    Nurlia Adu
    The document provides instructions for converting popular seismic data formats into input files for the LOTOS seismic tomography code, describing converters for formats including SIMULPS, SIMULPS2, SEISAN, and others, with converters run by starting the START.BAT batch file in each format's folder to generate the rays.dat and stat_ft.dat output files required by LOTOS.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Readme Data Convertors PDF

    Uploaded by

    Nurlia Adu
    82 views5 pages
    The document provides instructions for converting popular seismic data formats into input files for the LOTOS seismic tomography code, describing converters for formats including SIMULPS, SIMULPS2, SEISAN, and others, with converters run by starting the START.BAT batch file in each format's folder to generate the rays.dat and stat_ft.dat output files required by LOTOS.

    Original Title

    readme_data_convertors.pdf

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides instructions for converting popular seismic data formats into input files for the LOTOS seismic tomography code, describing converters for formats including SIMULPS, SIMULPS2, SEISAN, and others, with converters run by starting the START.BAT batch file in each format's folder to generate the rays.dat and stat_ft.dat output files required by LOTOS.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    82 views5 pages

    Readme Data Convertors PDF

    Uploaded by

    Nurlia Adu
    The document provides instructions for converting popular seismic data formats into input files for the LOTOS seismic tomography code, describing converters for formats including SIMULPS, SIMULPS2, SEISAN, and others, with converters run by starting the START.BAT batch file in each format's folder to generate the rays.dat and stat_ft.dat output files required by LOTOS.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 5

    Instructions for converting the most popular data formats onto the

    input files for the LOTOS code


    There are several data formats which are used for tomographic studies. Here we provide several
    data converters to generate the input files for the LOTOS code. Note that the considered formats
    might have some variations; thus the converters often need to be adapted to each specific case.
    The Fortran sources are provided. In case of any problem of conversion write to Ivan Koulakov
    KoulakovIY@ipgg.nsc.ru

    1. Conversion from SIMULPS (simulp folder)


    The initial data are: simulp/data_in/picks.dat and
    simulp/data_in/stations.dat

    To start conversion, run START.BAT. The output files will be generated as:
    simulp/data_out/rays.dat and simulp/data_out/stat_ft.dat

    2. Conversion from SIMULPS2 (simulp2 folder)


    The initial data are: simulp2/data_in/picks.dat and
    simulp2/data_in/stations.dat
    To start conversion, run START.BAT. The output files will be generated as:
    simulp2/data_out/rays.dat and simulp2/data_out/stat_ft.dat

    3. Conversion from the SEISAN output (seisan folder)


    The initial data are: seisan/data_in/picks.dat and
    seisan/data_in/stations.dat

    To start conversion, run START.BAT. The output files will be generated as:
    seisan/data_out/rays.dat and seisan/data_out/stat_ft.dat

    4. Here is another format provided by the Algerian seismologists


    (algeria folder)
    The initial data are: algeria/data_in/Phase.txt and
    algeria/data_in/Station.txt

    To start conversion, run START.BAT. The output files will be generated as:
    algeria/data_out/rays.dat and algeria/data_out/stat_ft.dat

    5. A format provided by Japanese colleagues (japan folder)


    The initial data are: japan/data_in/picks.dat and
    japan/data_in/stations.dat

    To start conversion, run START.BAT. The output files will be generated as:
    japan/data_out/rays.dat and japan/data_out/stat_ft.dat
    6. A format provided by USGS (Kilauea volcano) (usgs folder)
    The initial data are 3 files: usgs/data_in/picks.dat, usgs/data_in/picks.dat
    and usgs/data_in/stations.dat. The coordinates are given in Cartesian coordinates
    (in km) and converted to geographical coordinates. The conversion center should be indicated
    directly in the program.

    To start conversion, run START.BAT. The output files will be generated as:
    usgs/data_out/rays.dat and usgs/data_out/stat_ft.dat

    7. SSD format (ssd folder)


    The initial data contains a set of files of ssd format which are listed in file:
    ssd/data_in/files.txt. Station list is given in file ssd/data_in/stations.dat.
    To start conversion, run START.BAT. The output files will be generated as:
    ssd/data_out/rays.dat and ssd/data_out/stat_ft.dat

    You might also like