Certificado Liquidos Penetrantes

Certification
Spotcheck, SKL-WP2
Date: 10/24/2016
Purchase Order:
Batch #: 16K04K
It is hereby certified that when tested at the time of manufacture, the above listed material and batch
number meets the requirements of and has been tested for Sulfur and Halogens according to:
ASME Boiler and Pressure Vessel Code, 2004, 2007, 2010, 2013 and 2015 Edition, Section V,
Nondestructive Examination, including 2005, 2006, 2008, 2009b, and 2011a Addenda,
Article 6 Paragraph T-640 and Article 24 as applicable.
ASME Boiler and Pressure Vessel Code, 1995, 1998 and 2001 Edition, Section V Nondestructive
Examination, including 1999, 2000, 2002 and 2003 Addenda, Article 6 Paragraph T-640 and Article
24 as applicable.
ASME Boiler and Pressure Vessel Code, 1986, 1989 and 1992 Edition, Section V , Nondestructive
Examination, Article 6 including 1992 Addenda, Paragraph T-625, 1993 Addenda Paragraph T-640
and Article 24 as applicable.
ASTM E-165-92, ASTM E-165-94, ASTM E-165-95, ASTM E-165-02,ASTM E-165-09,
ASTM E-165/E-165M-12, Paragraph 7.1.
MIL-STD-271F(SH) June 27, 1986, Paragraphs 5.3 and 5.3.1, including Notice 1 Paragraph 5.6.1
June 21, 1993.
NAVSEA T9074-AS-GIB-010/271(April 30, 1997 including Notice 1, September 11, 2014 Rev. 1 )
Paragraph 5.3.1 and 5.6.2.
MIL-STD-2132D, February 11, 2003, Paragraphs 7.1, 7.1.2 and 7.1.3, Appendix C, Paragraph 40.
The following test results were obtained:
96 0.0096 wt., % of residue. CL+F___________ppm__________
Sulfur__________ppm__________ <10 <0.0010 wt., % of residue
NA
Cleaner residue (see note 3)_________________ NA
g/100g _________________ g/100ml
It is further certified that this material does not contain mercury as a basic element and that no mercury
bearing equipment has been used in its manufacture.
Notes:
1. Our batch number appears on the bottom of all aerosol cans and on the label of all bulk containers.
2. Most specifications require test results to be stated in percent but some require parts per million (ppm). To convert percent figures to parts per million move the
decimal four places to the right.
3. The above certification gives the results obtained at the time of manufacture. Age and use may alter the properties of any material.
Mathew Plamoottil Laurie Marx

Quality Assurance Manager Quality Control Manager
155 Harlem Ave.

Glenview, IL 60025
P: 1-847-657-5300
FORM NO F-1568 R-7/16 magnaflux.com
Certification
Spotcheck, SKL-WP2
Date: 10/24/2016
Purchase Order:
Batch #: 16K04K
It is hereby certified that the above listed inspection material and batch number meets the requirements of
AMS 2644F and is approved by the U.S. Air Force as listed on QPL-AMS-2644
When tested according to paragraph 4.3.2, Sampling Plan A, the following test results were obtained:
4.2.2.1 Penetrant Tests:
Flash Point (PMCC), 3.3.3

239 F
Viscosity, 3.3.4 ( 8.7 cs. Nominal)
Fluorescent Brightness, 3.3.8.3.2 (FP-4PE Standard) 8.71 cs@100 F
NA %
Water Tolerance (Method A only), 3.3.8.5
16.32 %
Removability, 3.3.8.6 PASS
4.2.2.1 Emulsifier Tests:
Flash Point (PMCC), 3.3.3

NA F
Viscosity, 3.3.4 ( cs. Nominal)
Water Content (Method D Only), 3.3.9.6 NA cs@100 F
NA %
4.2.2.3 Developer Tests:
Developer Fluorescence, 3.3.10.2 NA

Developer Removability, 3.3.10.4 NA
Redispersibility, 3.3.10.5 NA
3.3.11.4 Remover Tests:

Penetrant Removal, 4.4.11.2 NA
It is further certified that this material meets the requirements of ASTM E 1417, Paragraph 5.1.
Batch Numbers appear on labels of bulk containers and on bottoms of aerosol cans.

155 Harlem Ave.

Glenview, IL 60025
P: 1-847-657-5300
FORM NO F-1579E R2/16 magnaflux.com
Certification
SKL-WP2
Date: 10/24/2016
Purchase Order:
Batch #: 16K04K
We hereby certify that the Penetrate inspection material

Type SKL-WP2 , Batch No 16K04K
Manufactured in October, 2016 furnished on the above order number
meets the requirements of EN ISO 3452-2, with the following results.
Individual Property Section Requirement Result

Appearance 6.1 Red Liquid PASS
Sensitivity (30m panel) 6.2 Sensitivity Level (1(<75%) or 2 (75%)) 2
Density 6.3 0.839-0.927@ 20C (68F) 0.884
Viscosity 6.4 7.83-9.57 cST@37.8 C (100F) 8.71
Flashpoint 6.5 >101C (213F) 239
Washability 6.6 Residue equal or less than standard PASS

Corrosive Properties (Mg) 6.11 No evidence of staining, pitting or PASS
corrosion
Water Tolerance 6.10 >5% 16.32
*Testing in accordance with 5.4.1 Table 2 as applicable

155 Harlem Ave.

Glenview, IL 60025
P: 1-847-657-5300
Form No. 3452SKLWP2 R-2/16 magnaflux.com

Certificado Liquidos Penetrantes

Uploaded by

Copyright:

Available Formats

Certificado Liquidos Penetrantes

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Certificado Liquidos Penetrantes

Uploaded by

Copyright:

Available Formats

Certification

Mathew Plamoottil Laurie Marx

155 Harlem Ave.

4.2.2.1 Penetrant Tests:

Flash Point (PMCC), 3.3.3

4.2.2.1 Emulsifier Tests:

Flash Point (PMCC), 3.3.3

4.2.2.3 Developer Tests:

Developer Fluorescence, 3.3.10.2 NA

3.3.11.4 Remover Tests:

Mathew Plamoottil Laurie Marx

155 Harlem Ave.

We hereby certify that the Penetrate inspection material

Individual Property Section Requirement Result

Viscosity 6.4 7.83-9.57 cST@37.8 C (100F) 8.71

Flashpoint 6.5 >101C (213F) 239

Washability 6.6 Residue equal or less than standard PASS

*Testing in accordance with 5.4.1 Table 2 as applicable

Mathew Plamoottil Laurie Marx

155 Harlem Ave.

You might also like