Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 203 views

    LQM2 Front Panel Huawei

    Uploaded by

    Fresner Diaz
    The document summarizes the front panel of the LQM2 device. It has indicators like STAT and SRV and ports like TX1/RX1-TX8/RX8, IN1/OUT1, IN2/OUT2. The ports are used for transmitting and receiving client-side and WDM-side signals depending on the device's working mode (e.g. 1 x AP8 ODU1 mode, 2 x AP4 ODU1 mode). Tables 1 and 2 further explain the types and functions of the ports based on different working modes.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd

    LQM2 Front Panel Huawei

    Uploaded by

    Fresner Diaz
    203 views3 pages
    The document summarizes the front panel of the LQM2 device. It has indicators like STAT and SRV and ports like TX1/RX1-TX8/RX8, IN1/OUT1, IN2/OUT2. The ports are used for transmitting and receiving client-side and WDM-side signals depending on the device's working mode (e.g. 1 x AP8 ODU1 mode, 2 x AP4 ODU1 mode). Tables 1 and 2 further explain the types and functions of the ports based on different working modes.

    Original Description:

    Modulo OTN Huawei

    Copyright

    © © All Rights Reserved

    Available Formats

    DOC, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document summarizes the front panel of the LQM2 device. It has indicators like STAT and SRV and ports like TX1/RX1-TX8/RX8, IN1/OUT1, IN2/OUT2. The ports are used for transmitting and receiving client-side and WDM-side signals depending on the device's working mode (e.g. 1 x AP8 ODU1 mode, 2 x AP4 ODU1 mode). Tables 1 and 2 further explain the types and functions of the ports based on different working modes.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    203 views3 pages

    LQM2 Front Panel Huawei

    Uploaded by

    Fresner Diaz
    The document summarizes the front panel of the LQM2 device. It has indicators like STAT and SRV and ports like TX1/RX1-TX8/RX8, IN1/OUT1, IN2/OUT2. The ports are used for transmitting and receiving client-side and WDM-side signals depending on the device's working mode (e.g. 1 x AP8 ODU1 mode, 2 x AP4 ODU1 mode). Tables 1 and 2 further explain the types and functions of the ports based on different working modes.

    Copyright:

    © All Rights Reserved
    Download as DOC, PDF, TXT or read online from Scribd
    Download as doc, pdf, or txt
    of 3

    Front Panel

    There are indicators and ports on the LQM2 front panel.


    Appearance of the Front Panel

    Figure 1shows the front panel of the LQM2.


    Figure 1 Front panel of the LQM2

    Indicators

    There are some indicators on the front panel.

    Working status indicator (STAT) -red, green, orange

    Service status indicator (SRV) - red, green, orange

    WDM-side receive optical power status indicator (INn)- red, green, orange
    For details on the indicators, refer to Board Indicators.

    In VA8 mode, IN1 to IN4 are off.

    Ports

    RX1/TX1 to TX6/RX6 are client-side ports, while IN1/OUT1 and IN2/OUT2 are WDM-side ports.
    TX7/OUT3/RX7/IN3 and TX8/OUT4/RX8/IN4 can work as client-side ports or WDM-side ports based on the
    working mode of the board.

    When the LQM2 board adopts 1 x AP8 ODU1 mode:

    Table 1 Types and functions of the LQM2 ports (1 x AP8 ODU1 mode)

    Port Required Cable Remarks


    Port Type Function

    TX1/RX LC Transmits/Receiv Connectors, Managem TX7/O


    1 to (optical es the first group ent Cables UT3/RX7/IN3 and
    TX8/RX ports) service signals TX8/OUT4/RX8/I
    8 RJ-45 from client-side N4 work as the
    (electric equipment. client-side ports
    al ports)
    Table 1 Types and functions of the LQM2 ports (1 x AP8 ODU1 mode)

    Port Required Cable Remarks


    Port Type Function

    IN1/OUT LC Connected to the Connectors TX7/RX7 and


    1 OADM board to TX8/RX8.
    receive/transmit WDM-
    the WDM signals side optical ports
    coming from the provide the dual
    active channel. fed and selective
    receiving function.
    IN2/OUT LC Connected to the
    2 OADM board to
    receive/transmit
    the WDM signals
    coming from the
    standby channel.

    When the LQM2 board adopts 2 x AP4 ODU1 mode:

    Table 2 Types and functions of the LQM2 ports (2 x AP4 ODU1 mode)

    Port Required Cable Remarks


    Port Type Function

    TX1/RX LC Transmits/Receiv Connectors, Managem TX7/O


    1 to (optical es the first group ent Cables UT3/RX7/IN3 and
    TX8/RX ports) service signals TX8/OUT4/RX8/I
    8 RJ-45 from client-side N4 work as the
    (electric equipment. client-side ports
    al ports) TX7/RX7 and
    TX8/RX8.
    IN1/OUT LC Connected to the Connectors The
    1 OADM board to client-side ports
    receive/transmit TX1/RX1-
    the first group TX4/RX4 work
    WDM signals. with the WDM-
    Table 2 Types and functions of the LQM2 ports (2 x AP4 ODU1 mode)

    Port Required Cable Remarks


    Port Type Function

    IN2/OUT LC Connected to the


    2 OADM board to
    receive/transmit
    the second group
    WDM signals.

    side port
    IN1/OUT1.
    The
    client-side ports
    When the LQM2 board adopts 2 x AP3 ODU1 mode: TX5/RX5-
    TX8/RX8 work
    with the WDM-
    side port
    IN2/OUT2.
    When the TNF2LQM2 board adopts VA8 mode: Both
    the two port
    groups support
    single fed and
    single receiving.

    When the LQM2 board adopts 2 x AP2 ODU0 mode:

    You might also like