Location via proxy:   [ UP ]  
[Report a bug]   [Manage cookies]                
Scribd Logo
Upload

Welcome to Scribd!

  • 53 views

    Operation Rules For Turbine

    Uploaded by

    Abdul Rahman
    The document provides an overview of rules for turbine operation under varying load conditions. It discusses two operation modes: sliding-pressure operation and constant-pressure operation. For sliding-pressure operation, there are three types: pure sliding-pressure, throttling sliding-pressure, and compound sliding-pressure. The document also discusses startup procedures for turbines, dividing it into cold-state startup and hot-state startup based on cylinder temperature. Key steps for cold startup include preparation, running and warming the turbine up in stages. Hot startup requires meeting steam conditions without a warming period.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Operation Rules For Turbine

    Uploaded by

    Abdul Rahman
    53 views3 pages
    The document provides an overview of rules for turbine operation under varying load conditions. It discusses two operation modes: sliding-pressure operation and constant-pressure operation. For sliding-pressure operation, there are three types: pure sliding-pressure, throttling sliding-pressure, and compound sliding-pressure. The document also discusses startup procedures for turbines, dividing it into cold-state startup and hot-state startup based on cylinder temperature. Key steps for cold startup include preparation, running and warming the turbine up in stages. Hot startup requires meeting steam conditions without a warming period.

    Original Description:

    Operation

    Original Title

    7. Operation Rules for Turbine

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides an overview of rules for turbine operation under varying load conditions. It discusses two operation modes: sliding-pressure operation and constant-pressure operation. For sliding-pressure operation, there are three types: pure sliding-pressure, throttling sliding-pressure, and compound sliding-pressure. The document also discusses startup procedures for turbines, dividing it into cold-state startup and hot-state startup based on cylinder temperature. Key steps for cold startup include preparation, running and warming the turbine up in stages. Hot startup requires meeting steam conditions without a warming period.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    53 views3 pages

    Operation Rules For Turbine

    Uploaded by

    Abdul Rahman
    The document provides an overview of rules for turbine operation under varying load conditions. It discusses two operation modes: sliding-pressure operation and constant-pressure operation. For sliding-pressure operation, there are three types: pure sliding-pressure, throttling sliding-pressure, and compound sliding-pressure. The document also discusses startup procedures for turbines, dividing it into cold-state startup and hot-state startup based on cylinder temperature. Key steps for cold startup include preparation, running and warming the turbine up in stages. Hot startup requires meeting steam conditions without a warming period.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    Overview of Rules for

    Turbine Operation
    I. Unit Operation under varying-load/Off-design
    Condition
    Rules/Code for
    Design condition operation is only possible in tests. In
    Turbine Operation practical operation, the operation is under the off-
    design condition
    Two operation modes:
    Dr. Zhouhang Li
    sliding-pressure operation condition and constant-
    Kunming University of pressure operation condition
    Science and Technology

    Overview of Rules for Overview of Rules for


    Turbine Operation Turbine Operation
    sliding-pressure operation of the turbine sliding-pressure operation of the turbine
    1.Pure sliding-pressure operating: by regulating 3. Compound sliding-pressure operating has
    the boiler; poor response three modes:
    2.Throttling sliding-pressure operating: by Sliding-constant pressure compound mode
    regulating valves in turbine system; lower
    Constant-sliding pressure compound mode
    thermal economy
    Constant-sliding-constant pressure compound
    3.Compound sliding-pressure operating: has
    mode
    three modes

    1
    II. Trainings on Operation and
    III. Startup of Turbine Unit
    Technology Management
    1. Change rate of Temperature When the main steam pressure is 4.2 MPa,
    temperature is 320 and the temperature of the
    2. Temperature Difference between Inner and
    reheater is 260, the turbine is ready for
    Outer Walls of Cylinder
    running
    3. Temperature Difference between Upper and
    Depending on the cylinder temperature of the
    Lower Cylinders
    turbine (150-170), the startup can be divided
    4. Differential Expansion by:
    1.Cold-state startup
    2.Hot-state startup

    III. Startup of Turbine Unit Cold Startup of Turbine Unit


    Parameter Unit Scope Parameter Unit Scope


    1. Preparation for the Cold Start-up of Turbine: Reheater MPa 0.1-0.4
    Jacking oil pressure
    MPa 13.5
    pressure

    Confirmation of the normal operation of Axial mm -0.90.9

    <107
    Support bearing temperature
    translation
    protective systems
    -0.75
    Differential mm <99
    15.75 Thrust bearing temperature
    Confirmation of major parameters meeting the expansion

    requirements
    Pressure of MPa 0.1-0.2 <65
    Bearing outlet oil temperature
    lubricating oil


    Pressure of
    MPa 14.50.5 Steam exhaust port temperature of <79
    fire-resistant
    LP cylinder
    oil

    Temperature Temperature difference between
    4050 <83
    of fire- internal and external walls of steam
    resistant oil room

    2
    Cold Startup of Turbine Unit III. Startup of Turbine Unit
    2. Running, Speed Increasing and Warming of Hot Start-up of Turbine:
    the Turbine
    No warm-up is needed
    Operation rules and procedures
    Before the start, ensure the steam is
    Speed: 0 600 r/min 2040 r/min 2950 r/min overheated enough
    3000 r/min
    Different from the cold startup (gradual
    3. Precautions during speed increasing warming up)
    Critical speed for specific checks; normal speed
    changing rate

    III. Startup of Turbine Unit III. Startup of Turbine Unit


    1. Preparation for the hot Start-up of Turbine: 3. Operation procedures for the hot Start-up
    Confirmation of the parameters and specific Feed-water pump, induced draft fan, flow rate,
    operation meeting the requirements fluidization air, secondary air, primary air,
    amount of the supply coal
    2. Conditions for the hot start-up:
    4. Other Precautions for Hot Start-up
    Eccentricity, temperature difference, vaccum,
    draining, rotating speed and its changing rate, The amount of coal; temperature monitoring;
    expansion, displacement, etc. drum pressure; water level of drum, steam
    pressure and temperature

    You might also like