One Stage Gas Burners

RIELLO 40 FS SERIES
The Riello 40 FS series of one stage gas burners, is a complete
range of products developed to respond to any request
for light industrial application. The Riello 40 FS series is
available in five different models, with an output ranging
from 11 to 220 kW, divided in four different structures.
All the models use the same components designed by Riello
for the Riello 40 FS series. The high quality level guarantees
safe working.
The Riello 40 FS burners are fitted with a microprocessor -
based control box, with diagnostic functions.
In developing these burners, special attention was paid to
reducing noise, to the ease of installation and adjustment,
to obtaining the smallest size possible to fit into any sort of
boiler available on the market.
All the models are approved by the EN 676 European FS3 11 35 kW
Standard and conform to European Directives for EMC, Low FS5 23 58 kW
Voltage, Machinery and Boiler Efficiency. FS8 46 93 kW
All the Riello 40 FS burners are tested before leaving the FS10 42 116 kW
factory.
FS15 81 175 kW
FS20 81 220 kW

FIRING RATES

Useful working field

for choosing the
burner

Test conditions

GAS
conforming to
EN676
Temperature: 20C
Pressure: 1013,5
mbar
Altitude: 0 m a.s.l.

387
One Stage Gas Burners
RIELLO 40 FS SERIES

Overall dimensions (mm)

BURNER

MODEL A D E F H I M N V Z
u FS3 252 215 230 100 91 165 Rp 3/8* 37 132 25
u FS5 272 233 295 100 91 180 Rp 1/2 48 138 28
u FS8 305 262 347 110 105 204 Rp 3/4 61 142 33
u FS10 305 262 346 110 105 204 Rp 3/4 61 142 33
u FS15 350 298 389 120 125 230 Rp 3/4 67 152 33
u FS20 350 298 389 120 125 230 Rp 3/4 67 152 33
* With reduction nipple
** Standard equipment on R40 FS3

BURNER - BOILER MOUNTING FLANGE

FS3 - FS5 - FS8 - FS10 FS15 - FS20

MODEL A1 A2 B1 B2 C C1 F Q R
u FS3 - - - - 140 130 170 45 10
u FS5 - - - - 140 130 170 45 10
u FS8 - - - - 160 130 185 45 11
u FS10 - - - - 160 130 185 45 11
u FS15 155 200 155 200 170 - 170 90 11
u FS20 155 200 155 200 170 - 170 90 11

PACKAGING
MODEL X Y Z kg
u FS3 375 335 310 9,5
u FS5 445 355 335 11
Z
u FS8 483 495 330 13

Y u FS10 483 495 330 16

X u FS15 535 535 375 19
u FS20 535 535 375 20

388
One Stage Gas Burners
RIELLO 40 FS SERIES

Specification
DESIGNATION OF SERIES

Series : F

Fuel : S Natural gas

Size

Electrical supply to the system : 1/230/50 1/230V/50Hz

F S 3 1/230/50

STATE OF SUPPLY
Monoblock, gas burners, completely automatic, with one stage settings fitted with:
- Fan with forward curve blades
- Cover lined with sound-deadening material
- Metallic and fixed air damper with adjustment
- Single phase electric motor 230 V, 50 Hz

GAS
- Combustion head fitted with:
- stainless steel head cone, resistant to high temperatures
- ignition electrodes
- ionisation probe
- gas distributor
- flame stability disk
- flame inspection window
- Adjustable air pressure switch, with graduated selector, to guarantee burner lock out in the case of insufficient
combustible air
- Microprocessor-based flame control box, with diagnostic functions
- IP X0D (IP 40) electric protection level.

Standard equipment:
- Flange insulation screen
- Screws and nuts for fixing the flange to the boiler
- 7-pole socket
- Hinge
- Reduction nipple Rp 1/2 - Rp 3/8 (for R40 FS3 only)
- Grommet
- Instruction handbook for installation, use and maintenance
- Spare parts catalogue.

389
 One Stage Gas Burners
RIELLO 40 FS SERIES

Available models
Burners

HEAT OUTPUT TOTAL

ELECTRICAL
CODE MODEL NATURAL GAS POWER CERTIFICATION NOTE

(kW) (Nm3/h) (kW)

3756506 FS3 1/230/50 11 - 35 1,1 - 3,5 0,150 CE 0694 CN7805

3756606 FS5 1/230/50 23 - 58 2,3 - 5,8 0,150 CE 0694 CN7805 (1)
3756706 FS8 1/230/50 46 - 93 4,6 - 9,3 0,150 CE 0694 CN7805 (1)
3756435 FS10 1/230/50 42 - 116 4,2 - 11,6 0,130 CE 0694 CN7805 (1) (2)
3756803 FS15 1/230/50 81 - 175 8,1 - 17,5 0,130 CE 0694 CN7805 (1) (2)
3756935 FS20 1/230/50 81 - 220 8,1 - 22 0,250 CE 0694 CN7805 (1) (2)

Models for LPG applications

HEAT OUTPUT TOTAL

ELECTRICAL
CODE MODEL POWER CERTIFICATION NOTE
LPG
(kW) (Nm3/h) (kW)

3756439 FSP10 1/230/50 42 - 116 1,6 - 4,4 0,130 CE 0063AP6680 (1) (2)
3756939 FSP20 1/230/50 81 - 220 3,1 - 8,5 0,250 CE 0063AP6680 (1) (2)
Net calorific value G20: 10 kWh/Nm3 - Density: 0,71 kg/Nm3
Net calorific value G31 (LPG): 25,8 kWh/Nm3 - Density: 2,02 kg/Nm3
The burners of FS series are in according to EN 676
(1) With plug and socket
(2) French version

Gas Trains
GAS TRAIN GAS TRAIN NATURAL GAS LPG NOTE

CODE * MODEL BURNER ADAPTER BURNER ADAPTER

(type) (code) (type) (code)

3970569 MBC 65/1 - RSD 20 FS3 - FS5 FS3 - FS5 (1)

MULTIBLOC GAS TRAIN

3970530 MB 405/1 - RSD 20 FS5 - FS8 - FS20 FS5 - FS8 - FS20 (1) (2)
3970500 MB 405/1 - RT 20 FS10 FS10 (1) (3)
FS5 - FS8 - FS10 FS5 - FS8 - FS10
3970531 MB 407/1 - RSD 20 (1) (4)
FS15 - FS20 FS15 - FS20
3970532 MB 410/1 - RSD 20 FS10 - FS20 FS10 - FS20 (1)

Please see Designation of Gas Train Series in the page before the Catalogue index.
* Gas train are 230V/50Hz - 220V/60Hz electrical supply
(1) With installed plug (if the plug is not necessary, remove it in accordance with gas train instruction manual indication)
(2) FS8 80 kW with natural gas
(3) FS10 80 kW with natural gas
(4) FS20 180 kW with natural gas
The valve seal control device is compulsory (conforming to EN 676) on gas trains to burners with a maximum output over 1200 kW.
To select the gas train please refer to the technical data leaflet and/or instruction manual.

390
One Stage Gas Burners
RIELLO 40 FS SERIES

Burner accessories
Remote reset control kit for MG 557/3/5 control box

The MG 557 control box can be remotely released using an electric command kit. This
kit must be installed in conformity with the local authority.

BURNER KIT CODE

u FS3 - FS5 - FS8 - FS15 3002750

Extended head kit

Burners standard head can be transformed into extended head versions by using
the special kit. Here the KITS available for the various burners are listed, showing the
original and the extended lengths.

BURNER STANDARD HEAD EXTENDED HEAD KIT CODE

LENGTH (mm) LENGTH (mm)
u FS3 - FS5 100 125 3000820
u FS8 - FS10 110 170 3001064
u FS8 110 278 3000920
u FS15 - FS20 120 280 3000873

GAS
End cone with turbulator disk
The end cone turbolator disk reduces the flame length. It is suitable for oven applica-
tion (CO emissions) and short boiler chamber.

BURNER PROJECTION (mm) KIT CODE

u FS5 +15 3000916

u FS8 +18 3000917
u FS10 +18 3000918
u FS20 +23 3000919

LPG kit
For burning LPG gas, a special kit is available to be fitted to the combustion head on
the burner as shown in the following table.

BURNER KIT CODE FOR KIT CODE FOR

STANDARD HEAD EXTENDED HEAD
u FS3 3000881 3000881
u FS5 3000882 3000882
u FS8 3000927 3000927
u FS10 3000884 3000884
u FS15 3000885 3000885
u FS20 3000886 3000886

391
One Stage Gas Burners
RIELLO 40 FS SERIES

Burner accessories
Inlet air aspiration kit This kit allows to channel the external air directly into the burner and is available as
accessory for models:

BURNER KIT CODE

u FS3 20027571
u FS5 20027576
u FS8 - FS10 20027578
u FS15 - FS20 20027581

Town gas kit

BURNER KIT CODE

u FS3 3000888
u FS5 3000889
u FS8 3000890
u FS10 3000891
u FS20 3000893

Ground fault interrupter kit

A Ground fault interrupter kit is available as a safety device in case of electrical sys-
tem fault.
It is supplied with burners with pin plug.

BURNER KIT CODE

u FS5 - FS8 - FS10 - FS20 3001180

7-pin plug kit

If necessary a 7-pin plug kit is available (in packaging of n. 5 pieces).

BURNER KIT CODE

u All models 3000945

Continuous ventilation kit for RMG control box

If the burner requires continuous ventilation in the stages without flame, a special kit
is available as given in the following table.

BURNER KIT CODE

u FS15 - FS10 - FS20 3010094

392
One Stage Gas Burners
RIELLO 40 FS SERIES

Burner accessories
PC interface kit
To connect the control box to a personal computer for the transmission of operation,
fault signals and detailed service information, an interface adapter with PC software
are available.

BURNER KIT CODE

u FS3 - FS5 - FS8 3002731

u FS10 - FS15 - FS20 3002719

Gas train accessories

Seal control kit
To test the valve seals on the gas train, (except for the model with Multibloc MBC 65 DLE)
a special seal control kit is available.

KIT CODE KIT CODE

GAS
GAS TRAIN
for 50 Hz operation for 60 Hz operation
u MB/1 type 3010123 20050030

393